uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector for RC Airplane Boat, Motor Accessories
Asin: B07P6X8WF1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 5mm to 5mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.18 x 0.79 inches
See On Amazon Similar To uxcell 5mm to 5mm Bore
#1
uxcell MR105-2RS Deep Groove Ball Bearings 5mm Inner Dia 10mm OD 4mm Bore Double Sealed Chrome Steel Blue Seal Z2 20pcs
Asin: B082PRVZ7B | Model: a19092000ux1261 | PartNumber: a19092000ux1261
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 135 Newtons And Dynamic Load Rating Of 366 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr105-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR105-2RS (I.D.=5mm, O.D.=10mm, Thickness=4mm)
- mr105-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 135 newtons and dynamic load rating of 366 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell 99502H-2RS Deep Groove Ball Bearings 5/8-inch Inner Dia 1-3/8-inch OD 11mm Bore Double Sealed Chrome Steel Z2 10pcs
Asin: B082PYND7Q | Model: a19092000ux1126 | PartNumber: a19092000ux1126
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 2774 Newtons And Dynamic Load Rating Of 4605 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
99502H-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- 99502H-2RS (I.D.=5/8-inch, O.D.=1-3/8-inch, Thickness=11mm)
- 99502h-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 2774 newtons and dynamic load rating of 4605 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 1603ZZ Deep Groove Ball Bearings Z2 5/16 x 7/8 x 9/32inch Double Shielded Chrome Steel 5pcs
Asin: B0824SVY8D | Model: a19092900ux0591 | PartNumber: a19092900ux0591
Made From Chromium Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 310 Newtons And Dynamic Load Rating Of 745 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
1603-2Z Bearings Are Shielded On Both Sides To Keep Lubricant In.
Features
- 1603ZZ (I.D.=5/16", O.D.=7/8", Thickness=9/32")
- 1603-2Z bearings are shielded on BOTH SIDES to keep lubricant in
- Made from Chromium Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 310 newtons and dynamic load rating of 745 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell MR128-2RS Deep Groove Ball Bearings 8mm Inner Dia 12mm OD 3.5mm Bore Double Sealed Chrome Steel Blue Seal Z2 10pcs
Asin: B082PPLHLQ | Model: a19092000ux1288 | PartNumber: a19092000ux1288
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 219 Newtons And Dynamic Load Rating Of 462 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr128-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR128-2RS (I.D.=8mm, O.D.=12mm, Thickness=3.5mm)
- mr128-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 219 newtons and dynamic load rating of 462 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.05 Pounds
See On Amazon #5
uxcell 682ZZ Deep Groove Ball Bearings 2mm Inner Dia 5mm OD 2.3mm Bore Double Shielded Chrome Steel Z2 20pcs
Asin: B082PXZDJK | Model: a19092000ux1178 | PartNumber: a19092000ux1178
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 40 Newtons And Dynamic Load Rating Of 144 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
682Zz Bearings Are Shielded On Both Sides To Keep Lubricant In.
Features
- 682ZZ (I.D.=2mm, O.D.=5mm, Thickness=2.3mm)
- 682zz bearings are Shielded on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 40 newtons and dynamic load rating of 144 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 681XZZ Deep Groove Ball Bearings 1.5mm Inner Dia 4mm OD 2mm Bore Double Shielded Chrome Steel Z2 20pcs
Asin: B082PS9PHF | Model: a19092000ux1216 | PartNumber: a19092000ux1216
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 26 Newtons And Dynamic Load Rating Of 95 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
681Xzz Bearings Are Shielded On Both Sides To Keep Lubricant In.
Features
- 681XZZ (I.D.=1.5mm, O.D.=4mm, Thickness=2mm)
- 681xzz bearings are Shielded on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 26 newtons and dynamic load rating of 95 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.01 pounds
See On Amazon #7
uxcell 99502H-2RS Deep Groove Ball Bearings 5/8-inch Inner Dia 1-3/8-inch OD 11mm Bore Double Sealed Chrome Steel Z2 2pcs
Asin: B082PZ9HYR | Model: a19092000ux1125 | PartNumber: a19092000ux1125
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 2774 Newtons And Dynamic Load Rating Of 4605 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
99502H-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- 99502H-2RS (I.D.=5/8-inch, O.D.=1-3/8-inch, Thickness=11mm)
- 99502h-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 2774 newtons and dynamic load rating of 4605 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell MR85-2RS Deep Groove Ball Bearings 5mm Inner Dia 8mm OD 2.5mm Bore Double Sealed Chrome Steel Blue Seal Z2 10pcs
Asin: B082PQ6T21 | Model: a19092000ux1245 | PartNumber: a19092000ux1245
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 72 Newtons And Dynamic Load Rating Of 185 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr85-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR85-2RS (I.D.=5mm, O.D.=8mm, Thickness=2.5mm)
- mr85-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 72 newtons and dynamic load rating of 185 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.01 pounds
See On Amazon #9
uxcell 20pcs Aluminum Spacer 5mm Bore 10mm OD, 8mm Length Screw Standoff Bushing Plain Finish Round Spacer for M5 Screws Bolts and Rods
Asin: B0CQ2PVZHY
Heat Dissipation: Aluminum Has Good Thermal Conductivity, Allowing It To Efficiently Dissipate Heat From Electronic Components..
Multi-Size Available: Our Aluminum Spacers Come In Various Lengths To Accommodate Different Application Requirements..
Versatility: Widely Used For Applications Such As Electronics, Automotive, Construction, And Industrial Machinery To Provide Precise Spacing And Thermal Management..
Material: Made From Quality Aluminum Alloy, Which Provides Excellent Strength, Durability, And Corrosion Resistance..
Features
- Size: 5mm inner diameter aluminum spacer, 10mm outside diameter, 8mm Length. Fits M5 screws bolts and rod bars
- Material: Made from quality aluminum alloy, which provides excellent strength, durability, and corrosion resistance.
- Heat Dissipation: Aluminum has good thermal conductivity, allowing it to efficiently dissipate heat from electronic components.
- Versatility: Widely used for applications such as electronics, automotive, construction, and industrial machinery to provide precise spacing and thermal management.
- Multi-size Available: Our aluminum spacers come in various lengths to accommodate different application requirements.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Round Steel Rod, 5mm HSS Lathe Bar Stock Tool 200mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool, 2pcs
Asin: B07KT39M7P | Model: a18103100ux0119 | PartNumber: a18103100ux0119
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 5mm / 0.2"; length: 200mm / 7.87". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 7.48 x 5.91 inches
See On Amazon #11
uxcell A15113000ux1262 5 Pcs 5mm x 100mm DIY RC Car Model Straight Metal Round Shaft Rod Bars (Pack of 5)
Asin: B01B27MJC6 | Model: a15113000ux1262 | PartNumber: a15113000ux1262 | Ean: 0712662869030 | UPC: 712662869030
Size: 5Mm X 100Mm(0.2" X 4")(D*L); For: Diy Rc Model.
Package Content: 5 Pcs X Round Metal Rod.
Net Weight: 77G; Main Color: Silver Tone.
Material: Metal.
Features
- Product Name: Round Metal Rod
- Material: Metal
- Size: 5mm x 100mm(0.2 x 4)(D*L); For: DIY RC Model
- Net Weight: 77g; Main Color: Silver Tone
- Package Content: 5 Pcs x Round Metal Rod
- See more on Amazon...
First Available: 08/23/2018
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 0.79 inches | Weight: 0.24 pounds
See On Amazon #12
uxcell Round Steel Rod, 1.5mm HSS Lathe Bar Stock Tool 100mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool, 10pcs
Asin: B07KY8XJQL | Model: a18102400ux0319 | PartNumber: a18102400ux0319
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 1.5mm / 0.06"; length: 100mm / 3.93". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 0.39 inches
See On Amazon #13
uxcell 20pcs 4mm Dia Ceramic Tube Insulated Electronic Wire Bundle Heat Insulation Protection Single Bore
Asin: B0951ZVGSW | Model: a21012700ux0015 | PartNumber: a21012700ux0015
Advantage: Resistance To High Temperature, Heat Resistance, Temp Up To 1600 Celsius(2912 °F), 1000 Insulation Voltage, High Corrosion Resistance..
Application: It Can Be Used For Insulation Protection Of Cable Bundle, Ceramic Bead Electronic Wires, For Heat Insulation And Protection Of Electric Wire, Widely Used In Electric Heating Elements, Protection Sheaths, Insulators, Etc..
Tips: Avoid The Ceramic From Breaking To Scratch Your Hands, It Is Recommended That You Wear Gloves For Installation..
Length: 10Mm/0.39''. Bore Diameter: 4Mm/0.16''. Max Od: 7Mm/0.27''. Color: Grey.
Features
- Package: 20pcs x High-Temperature Resistant Insulating Ceramic Tube.
- Length: 10mm/0.39''. Bore Diameter: 4mm/0.16''. Max OD: 7mm/0.27''. Color: Grey
- Advantage: Resistance to high temperature, heat resistance, temp up to 1600 Celsius(2912 F), 1000 insulation voltage, high corrosion resistance.
- Tips: Avoid the ceramic from breaking to scratch your hands, it is recommended that you wear gloves for installation.
- Application: It can be used for insulation protection of cable bundle, ceramic bead electronic wires, for heat insulation and protection of electric wire, widely used in electric heating elements, protection sheaths, insulators, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Straight Shank Twist Drill Bits 2.5mm High Speed Steel 4341 with 2.5mm Shank 5 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D1JCN1 | Model: a19102500ux0096 | PartNumber: a19102500ux0096
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 2.5mm / 0.1"; Shank Diameter : 2.5mm / 0.1"; Cutting Edge Length: 26mm / 1.02"; Total Length : 55mm / 2.17"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #15
uxcell F685ZZ Flanged Ball Bearing 5mmx11mmx5mm Double Shielded Chrome Steel Deep Groove Bearings 10pcs
Asin: B07Z3CLZP5 | Model: a19091100ux0578 | PartNumber: a19091100ux0578
[Load & Speed] - Dynamic Load Rating Of 609N And Static Load Rating Of 226N. The Limiting Speed Is 45000 Rpm Under Grease Lubricating..
[Application] - Commonly Used For Glider/Rocker Arm, Wheel Of The Cart, Lawnmower, Printers, Fax Machines, Power Tools, And Other Homemade Projects..
[Easy To Maintain] - Shields On Both Sides To Keep Lubricant In. Z1 Noise Level For Most General Use..
[Durable] - Chrome Steel (Gcr15) Races Offer High Hardness And Great Wear Resistance, Thus Extend Bearings' Service Life..
Features
- [Size] - F685ZZ ABEC1 bearing (I.D.=5mm, O.D.=11mm, Thickness=5mm, Flange Dia: 12.5mm).
- [Durable] - Chrome Steel (GCr15) races offer high hardness and great wear resistance, thus extend bearings' service life.
- [Load & Speed] - Dynamic load rating of 609N and static load rating of 226N. The limiting speed is 45000 RPM under grease lubricating.
- [Easy to Maintain] - Shields on Both sides to keep lubricant in. Z1 noise level for most general use.
- [Application] - Commonly used for glider/rocker arm, wheel of the cart, lawnmower, printers, fax machines, power tools, and other homemade projects.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell Hand Reamers Set H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool 10pcs (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm)
Asin: B09C8P6N36 | Model: a20103000ux0076 | PartNumber: a20103000ux0076
Wide Applications: Used For Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: cutting diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 5mm Bore Drill Stop, Drill Bit Depth Holder, Set Screw Style, Black Oxide Carbon Steel, Pack of 2
Asin: B07KWW4V69 | Model: a18103100ux0509 | PartNumber: a18103100ux0509
[Adjustable] - Drill Stop Bit Can Be Quickly And Easily Adjusted At Any Point On Drill Bit Flutes, Helps To Drill Holes To Exact Depths, Prevents Under And Over Drilling..
[Notice] - For Maximum Holding Power, Make Sure The Set Screw Material Is Harder Than Your Shaft Material. Do Not Move The Drill Bit Stop After Tightening..
[Application] - Set-Screw Type Drill Stop Is Suitable For Low Axial Loads And Simple Positioning. It Is Great For Jobs That Use A Bit And Need Precision..
[Material] - Strong And Durable Steel With Black-Oxide Finished For Better Corrosion-Resistance. Set Screw Type Will Stay Sturdy When Tightened And Is Specially Designed Not To Break The Bits..
Features
- [SIZE] - 5mm bore 8mm thickness drill stop. Hex wrench is included to help adjust and install the stop rings.
- [MATERIAL] - Strong and durable steel with black-oxide finished for better corrosion-resistance. Set screw type will stay sturdy when tightened and is specially designed not to break the bits.
- [ADJUSTABLE] - Drill stop bit can be quickly and easily adjusted at any point on drill bit flutes, helps to drill holes to exact depths, prevents under and over drilling.
- [APPLICATION] - Set-screw type drill stop is suitable for low axial loads and simple positioning. It is great for jobs that use a bit and need precision.
- [NOTICE] - For maximum holding power, make sure the set screw material is harder than your shaft material. Do not move the drill bit stop after tightening.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 inches | Weight: 0.00 Pounds
See On Amazon #18
uxcell 15pcs 624ZZ Deep Groove Ball Bearings 4mm Bore 13mm OD 5mm Thick Carbon Steel Double Shielded ABEC3 Z1 Bearing for Motors
Asin: B0CJFRL66B
Features - Single Row, Double Shielded Type. Abec3 Accuracy, Z1 Noise Level. They Are Used To Accommodate Radial And Axial Loads In Both Directions..
Notice - These Bearings Often Feature A Simple Design, Allowing For Easy Disassembly, Lubrication, And Maintenance, Which Contributes To Their Longevity And Overall Performance..
Applications - Suitable For Many Kinds Of Industrial Equipment, Such As Computer Hard Drives, Motors, And Instrumentation Equipment..
Material - Carbon Steel Is Known For Its Excellent Strength And Durability, Also Is A Cost-Effective Material Choice For Deep Groove Ball Bearings.
Features
- Size - Model: 624ZZ, 4mm inner diameter, 13mm outer diameter, 5mm thickness
- Material - Carbon steel is known for its excellent strength and durability, also is a cost-effective material choice for deep groove ball bearings
- Features - Single row, double shielded type. ABEC3 accuracy, Z1 noise level. They are used to accommodate radial and axial loads in both directions.
- Applications - Suitable for many kinds of industrial equipment, such as computer hard drives, motors, and instrumentation equipment.
- Notice - These bearings often feature a simple design, allowing for easy disassembly, lubrication, and maintenance, which contributes to their longevity and overall performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 688-2RS Deep Groove Ball Bearings 8mm Inner Dia 16mm OD 5mm Bore Double Sealed Chrome Steel Z2 4pcs
Asin: B082PRKLCZ | Model: a19092000ux1193 | PartNumber: a19092000ux1193
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 474 Newtons And Dynamic Load Rating Of 1064 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
688-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- 688-2RS (I.D.=8mm, O.D.=16mm, Thickness=5mm)
- 688-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 474 newtons and dynamic load rating of 1064 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.03 pounds
See On Amazon #20
uxcell 20pcs Aluminum Spacer 5mm Bore 10mm OD, 3mm Length Screw Standoff Bushing Plain Finish Round Spacer for M5 Screws Bolts and Rods
Asin: B0CQ2R5GDW
Heat Dissipation: Aluminum Has Good Thermal Conductivity, Allowing It To Efficiently Dissipate Heat From Electronic Components..
Multi-Size Available: Our Aluminum Spacers Come In Various Lengths To Accommodate Different Application Requirements..
Versatility: Widely Used For Applications Such As Electronics, Automotive, Construction, And Industrial Machinery To Provide Precise Spacing And Thermal Management..
Material: Made From Quality Aluminum Alloy, Which Provides Excellent Strength, Durability, And Corrosion Resistance..
Features
- Size: 5mm inner diameter aluminum spacer, 10mm outside diameter, 3mm Length. Fits M5 screws bolts and rod bars
- Material: Made from quality aluminum alloy, which provides excellent strength, durability, and corrosion resistance.
- Heat Dissipation: Aluminum has good thermal conductivity, allowing it to efficiently dissipate heat from electronic components.
- Versatility: Widely used for applications such as electronics, automotive, construction, and industrial machinery to provide precise spacing and thermal management.
- Multi-size Available: Our aluminum spacers come in various lengths to accommodate different application requirements.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search