uxcell 6mm to 6mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Blue,2pcs
Asin: B07P96938Q
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 6mm to 6mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon Similar To uxcell 6mm to 6mm Bore
#1
uxcell Straight Shank Twist Drill Bits 6mm High Speed Steel 4341 with 6mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CY7MCS | Model: a19102500ux0119 | PartNumber: a19102500ux0119
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 6mm / 0.24"; Shank Diameter : 6mm / 0.24"; Cutting Edge Length: 53mm / 2.09"; Total Length : 90mm / 3.54"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell Square Hole Drill Bit, 1/2" High-Carbon Steel Hollow Chisel Mortise Power Tool for Woodworking
Asin: B07M6JSZ7G | Model: a18112900ux0074 | PartNumber: a18112900ux0074
【Material】Made Of High-Carbon Steel, Through Heat Processing, With High Hardness (48-50 Hrc) Drill Bits, And Sharp-Edged Square Chisel, Durable And Lasts Long..
【Operation】Used With Mortise And Tenon Machine With Double Effect, And Electric Drill, Hammer And Other Tools Is Required For Punching Square Hole In Wood. This Drill Bit Cannot Be Used With A Hand Drill. If You Want To Use The Drill Bit With A Drill Press, You Will Need Accessories To Attach To The Drill Press..
【Advantage】With Long Drill Core And Square Chisel, Easy To Lock The Hole On The Wood, Can Reduce Labor Intensity Of Construction Workers, Speed Up The Construction Speed, Reduce Construction Costs..
【Tip And Edge】The Best-Designed Drilling Point Tip And 4 Cutting Corners Enable Fast Drilling With Small Opening Resistance, And Penetrating Into Working Pieces Of Wood In Precise Opening Size Very Smoothly And Fast..
Features
- SIZE 1/2" (12.7mm) square chisel width, 75mm cutting depth, 205mm total length, 9.7mm shank diameter.
- TIP AND EDGE The best-designed drilling point tip and 4 cutting corners enable fast drilling with small opening resistance, and penetrating into working pieces of wood in precise opening size very smoothly and fast.
- MATERIAL Made of High-carbon steel, through heat processing, with high hardness (48-50 HRC) drill bits, and sharp-edged square chisel, durable and lasts long.
- ADVANTAGE With long drill core and square chisel, easy to lock the hole on the wood, can reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs.
- OPERATION Used with mortise and tenon machine with double effect, and electric drill, hammer and other tools is required for punching square hole in wood. This drill bit cannot be used with a hand drill. If you want to use the drill bit with a drill press, you will need accessories to attach to the drill press.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.98 x 7.87 x 0.98 inches | Weight: 0.00 Pounds
See On Amazon #3
uxcell Hand Reamers Set H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool 10pcs (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm)
Asin: B09C8P6N36 | Model: a20103000ux0076 | PartNumber: a20103000ux0076
Wide Applications: Used For Handicraft Processing, And Bore Machining. Suitable For Accurate Reaming In Aluminum, Cast Iron, Copper, Plastic, Wood, And Other Soft Materials..
Straight Flute: Straight Flute Tools Allow Chips To Collect In The Flutes When Cutting. Well Suited For Most Applications In Shallow Cuts..
Easy To Use: Can Be Hand Operated By Use Of Wrenches. Great For Light Cut, Repair Work, Or Simply For Enlarging Holes. Always Keep Reamers Clean, And Used With Machine Oil For Long Service Use..
Material And Coating: Made Of Alloy Tool Steel, The Reamers Have High Hardness, Durability, And Provide Finish Cuts. Features Just The Base Substrate Without Any Coatings, Suitable For Wide Ranges Of Applications..
Features
- Specifications: cutting diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm; accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications.
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications.
- Wide Applications: Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell Drill Press Spring Drill Press Quill Feed Return Coil Spring Assembly Spring Steel Chemical Blackening Finish 680mm Expand Long 36x6x0.65mm 2 Pcs
Asin: B07MX8JZX1 | Model: a18120800ux0210 | PartNumber: a18120800ux0210
☆ The Drill Press Quill Return Spring Is Good Replacement For Many Existing Quill Spring Drill Presses, This Spring Will Returns The Quill To The Top After You Have Completed Drilling.Used To All Kinds Of Vacuum Cleaner Coil Spring, Volume Tube Coil Spring, And So On..
☆ Pay Attention When Installing Springs. Do Not Loosen The Wire Of Fixed Springs! When Installing, Install The Spring With A Fixed Wire Directly Into The Spring Seat, And The Wire Will Slide Out..
☆ Chemical Blackening, The Performance Of The Product Form Oxide Film, Isolate The Air, Prevent Rust..
Inner Mounting Type : Hook; Outer Mounting Type : Hook，Pack With 2 X Drill Press Spring.
Features
- Expand Length : 680mm/26.8inch ; Spring OD : 36mm ; Material Width : 6mm ; Material Thickness : 0.65mm
- Inner Mounting Type : Hook; Outer Mounting Type : Hook Pack with 2 x Drill Press Spring
- The drill press quill return spring is good replacement for many existing quill spring drill presses, this spring will returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, and so on.
- Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.
- Pay attention when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 3.94 x 1.97 Inches
See On Amazon #5
uxcell Straight Shank Twist Drill Bits 6mm High Speed Steel 4341 with 6mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CWXDQ9 | Model: a19102500ux0118 | PartNumber: a19102500ux0118
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 6mm / 0.24"; Shank Diameter : 6mm / 0.24"; Cutting Edge Length: 53mm / 2.09"; Total Length : 90mm / 3.54"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #6
uxcell 2 Pcs 1/4" Quick-Change Hex Shank 10mm Magnetic Nut Setter Driver Drill Bit, 65mm Length, Metric
Asin: B07BNPF2V7 | Model: a18022800ux0035 | PartNumber: a18022800ux0035
【Material】Heat Treared Chrome Vanadium Steel Construction With Sandblasted Finish For Increased Hardness And Corrosion Resistant..
【Application】Widely Used In Household Diy, Woodworking, Professional Machine Repairing, Etc..
【Magnetic】Magnetic Nut Setter Can Be Be Used With An Impact/Bit Driver Or Hex Socket Ratchet To Securely Grab Nuts And Fasteners For Easy Installation Or Loosening/Removal..
【1/4" Hex Shank】Universal 1/4 Inch Hex Shanks Fit A Variety Of Quick-Change Chucks And Drill, Driver, Or Screwgun..
Features
- Size 10mm nut driver, 65mm (2.5 inch) total length.
- 1/4 Hex Shank Universal 1/4 inch hex shanks fit a variety of quick-change chucks and drill, driver, or screwgun.
- Material Heat treared chrome vanadium steel construction with sandblasted finish for increased hardness and corrosion resistant.
- Magnetic Magnetic nut setter can be be used with an impact/bit driver or hex socket ratchet to securely grab nuts and fasteners for easy installation or loosening/removal.
- Application Widely used in household DIY, woodworking, professional machine repairing, etc.
- See more on Amazon...
Brand: sourcing map | Manufacturer: uxcell
See On Amazon #7
uxcell 606-2RS Deep Groove Ball Bearing Double Sealed 180016 6mm x 17mm x 6mm High Carbon Steel Z1 Bearings Pack of 10
Asin: B07FF6FSK7 | Model: a18051900ux0204 | PartNumber: a18051900ux0204
Made From High Carbon Steel, Durability And Resistance To Under Heavy Loads.
Same As 606-2Rs / 180016. Pre-Lubricated, Easy To Maintain.
Abec Tolerance 1 (P0), Z1 Noise Level For Most General Use.
Sealed On Both Sides Of The Bearing To Keep Lubricant In. Suitable For Complex Environment.
Features
- Size: 606-2RS (Inner Dia.=6mm, Outer Dia.=17mm, Thickness=6mm)
- Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment
- Made from High Carbon Steel, durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
- Same As 606-2RS / 180016. Pre-Lubricated, Easy to maintain
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell F686ZZ Flanged Ball Bearing 6x13x5mm Chrome Steel Bearings Double Shielded 10 Pcs
Asin: B07Z38H4JB | Model: a19091100ux0639 | PartNumber: a19091100ux0639
[Load & Speed] - Dynamic Load Rating Of 920N And Static Load Rating Of 354N. The Limiting Speed Is 40000 Rpm Under Grease Lubricating..
[Application] - Commonly Used For Glider/Rocker Arm, Wheel Of The Cart, Lawnmower, Printers, Fax Machines, Power Tools, And Other Homemade Projects..
[Easy To Maintain] - Shields On Both Sides To Keep Lubricant In. Z1 Noise Level For Most General Use..
[Durable] - Chrome Steel (Gcr15) Races Offer High Hardness And Great Wear Resistance, Thus Extend Bearings' Service Life..
Features
- [Size] - F686ZZ ABEC1 bearing (I.D.=6mm, O.D.=13mm, Thickness=5mm, Flange Dia: 15mm).
- [Durable] - Chrome Steel (GCr15) races offer high hardness and great wear resistance, thus extend bearings' service life.
- [Load & Speed] - Dynamic load rating of 920N and static load rating of 354N. The limiting speed is 40000 RPM under grease lubricating.
- [Easy to Maintain] - Shields on Both sides to keep lubricant in. Z1 noise level for most general use.
- [Application] - Commonly used for glider/rocker arm, wheel of the cart, lawnmower, printers, fax machines, power tools, and other homemade projects.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.06 Pounds
See On Amazon #9
uxcell F696ZZ Flanged Ball Bearing 6mmx15mmx5mm Double Shielded Chrome Steel Deep Groove Bearings 10pcs
Asin: B07Z3F1MR5 | Model: a19091100ux0635 | PartNumber: a19091100ux0635
[Load & Speed] - Dynamic Load Rating Of 1139N And Static Load Rating Of 418N. The Limiting Speed Is 40000 Rpm Under Grease Lubricating..
[Application] - Commonly Used For Glider/Rocker Arms, Wheels Of The Cart, Lawnmowers, Printers, Pumps, Motors, Gearboxes, Reducer, Textile Machinery, Electronic Equipment, And More..
[Easy To Maintain] - Shields On Both Sides To Keep Lubricant In. Z1 Noise Level For Most General Use..
[Durable] - Chrome Steel (Gcr15) Races Offer High Hardness And Great Wear Resistance, Thus Extend Bearings' Service Life..
Features
- [Size] - F696ZZ ABEC1 bearing (I.D.=6mm, O.D.=15mm, Thickness=5mm, Flange Dia: 17mm).
- [Durable] - Chrome Steel (GCr15) races offer high hardness and great wear resistance, thus extend bearings' service life.
- [Load & Speed] - Dynamic load rating of 1139N and static load rating of 418N. The limiting speed is 40000 RPM under grease lubricating.
- [Easy to Maintain] - Shields on Both sides to keep lubricant in. Z1 noise level for most general use.
- [Application] - Commonly used for glider/rocker arms, wheels of the cart, lawnmowers, printers, pumps, motors, gearboxes, reducer, textile machinery, electronic equipment, and more.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Inline Screw Type Fuse Holder 16 Gauge AWG 5Pcs for 6mm x 30mm Tube Fuse
Asin: B07SPS14WX | Model: a19040700ux0426 | PartNumber: a19040700ux0426
Black Inline Screw Type Fuse Holder. Energy Efficient, Easy To Install, And Great Performance..
Protect The Wiring And Electrical Equipment From Short Circuit, Overload Etc..
Good Bending Performance And Excellent Electrical Conductivity..
Suitable For 6X30mm Tube Fuse..
Features
- 16 AWG In-line screw type fuse holder.
- Suitable for 6x30mm tube fuse.
- Black inline screw type fuse holder. Energy efficient, easy to install, and great performance.
- Good bending performance and excellent electrical conductivity.
- Protect the wiring and electrical equipment from short circuit, overload etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell MR106-2RS Deep Groove Ball Bearings 6mm Inner Dia 10mm OD 3mm Bore Double Sealed Chrome Steel Blue Seal Z2 10pcs
Asin: B082PPH3Z2 | Model: a19092000ux1265 | PartNumber: a19092000ux1265
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 174 Newtons And Dynamic Load Rating Of 422 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr106-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR106-2RS (I.D.=6mm, O.D.=10mm, Thickness=3mm)
- mr106-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 174 newtons and dynamic load rating of 422 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.02 pounds
See On Amazon #12
uxcell 5 Pcs 1/4" Quick-Change Hex Shank 7mm Magnetic Nut Setter Driver Drill Bit, 65mm Length, Metric
Asin: B07BNMS93H | Model: a18022800ux0029 | PartNumber: a18022800ux0029
【Material】Heat Treared Chrome Vanadium Steel Construction With Sandblasted Finish For Increased Hardness And Corrosion Resistant..
【Application】Widely Used In Household Diy, Woodworking, Professional Machine Repairing, Etc..
【Magnetic】Magnetic Nut Setter Can Be Be Used With An Impact/Bit Driver Or Hex Socket Ratchet To Securely Grab Nuts And Fasteners For Easy Installation Or Loosening/Removal..
【1/4" Hex Shank】Universal 1/4 Inch Hex Shanks Fit A Variety Of Quick-Change Chucks And Drill, Driver, Or Screwgun..
Features
- Size 7mm nut driver, 65mm (2.5 inch) total length.
- 1/4 Hex Shank Universal 1/4 inch hex shanks fit a variety of quick-change chucks and drill, driver, or screwgun.
- Material Heat treared chrome vanadium steel construction with sandblasted finish for increased hardness and corrosion resistant.
- Magnetic Magnetic nut setter can be be used with an impact/bit driver or hex socket ratchet to securely grab nuts and fasteners for easy installation or loosening/removal.
- Application Widely used in household DIY, woodworking, professional machine repairing, etc.
- See more on Amazon...
Brand: sourcing map | Manufacturer: uxcell
Dimensions: 1.18 x 5.51 x 3.94 inches
See On Amazon #13
uxcell MR126-2RS Deep Groove Ball Bearings 6mm Inner Dia 12mm OD 4mm Bore Double Sealed Chrome Steel Z2 10pcs
Asin: B082PQ8DVT | Model: a19092000ux1222 | PartNumber: a19092000ux1222
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 236 Newtons And Dynamic Load Rating Of 609 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr126-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR126-2RS (I.D.=6mm, O.D.=12mm, Thickness=4mm)
- mr126-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 236 newtons and dynamic load rating of 609 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Tungsten Carbide Rotary Files 1/8" Shank, Double Cut Ball Shape Rotary Burrs Tool 6mm Dia, for Die Grinder Drill Bit Wood Soft Metal Carving Polishing Model Engineering, 3pcs
Asin: B07NRHRM92 | Model: a18121200ux0625 | PartNumber: a18121200ux0625
Double Cut Design: The Groove Lines Are Crossed. Double Groove Rotary Files Are More Suitable For The Object Density Is Relatively Low, Such As Wood, Plastic, Aluminum. With Good Milling And Cutting Performance, Ensures High Work Efficiency..
Tips: Requirement Of The Carbide Burrs Rotating Speed Is: 4000-50000 Rpm. Always Ensure Your Burrs Shank Is Well Inserted Into Your Collet And Clamped Down Tightly.
Versatile Use: Widely Used For Metalwork, Tool Making, Model Engineering, Wood Carving, Jewelry Making,Welding, Chamfering, Casting, Deburring, Grinding, Sculpting.
Long Working Life: Made Of Heat-Treated Tungsten Carbide That Hardness Can Be Up To Above Hra85, Sharp And Sturdy, Long Service Life.
Features
- Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders
- Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life
- Double Cut Design: The groove lines are crossed. Double groove rotary files are more suitable for the object density is relatively low, such as wood, plastic, aluminum. With good milling and cutting performance, ensures high work efficiency.
- Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting
- Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 0.79 x 0.79 Inches
See On Amazon #15
uxcell Hex Coupler 5mm Bore Motor Hex Brass Shaft Coupling Flexible Connector for Car Wheels Tires Shaft Motor 4pcs
Asin: B08M3S6Y6T
【Material:】- Made Of Brass, Sturdy, Reliable And Strictly Functional. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
【Package Content】- 4Pcs Hex Coupler, 8Pcs M4 Screws, 2Pcs 4Mm Hex Wrench..
【Function】- A Special Coupler, Used For Connecting The Motor Shaft And The Hexagon Wheel Of The Robot And Other Models..
【Coupling Size】- Hex Height : 6Mm ; Opposite Side: 12Mm ; Cylinder Height: 24Mm ; Cylinder Outer Diameter: 11.5Mm ; Cylinder Inner Diameter: 5Mm ; Fastening Screw Hole: M4.
Features
- Type - 5mm Hex Brass Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Coupling Size - Hex Height : 6mm ; Opposite Side: 12mm ; Cylinder Height: 24mm ; Cylinder Outer Diameter: 11.5mm ; Cylinder Inner Diameter: 5mm ; Fastening Screw Hole: M4
- Material: - Made of brass, sturdy, reliable and strictly functional. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function - A special coupler, used for connecting the motor shaft and the hexagon wheel of the robot and other models.
- Package Content - 4pcs Hex Coupler, 8pcs M4 Screws, 2pcs 4mm Hex Wrench.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell Square Hole Drill Bit, 1/2" High-Carbon Steel Hollow Chisel Mortise Power Tool for Woodworking 2 Pcs (Silver & Black)
Asin: B015A3DPZ8 | Model: a15062200ux0311 | PartNumber: a15062200ux0311
【Material】Made Of Durable Metal Material Provides A Long Use Life..
【Operation】Used With Mortise And Tenon Machine With Double Effect, And Electric Drill, Hammer And Other Tools Is Required For Punching Square Hole In Wood..
【Advantage】With Long Drill Core And Square Chisel, Easy To Lock The Hole On The Wood, Can Reduce Labor Intensity Of Construction Workers, Speed Up The Construction Speed, Reduce Construction Costs..
【Tip And Edge】The Best Designed Drilling Point Tip And 4 Cutting Corner To Enable The Fast Drilling And Penetrating Into Working Pieces Of Wood Very Smooth And Fast..
Features
- SIZE 1/2" square chisel width, 70mm cutting depth, 210mm total length.
- TIP AND EDGE The best designed Drilling Point tip and 4 Cutting Corner to enable the fast drilling and penetrating into working pieces of wood very smooth and fast.
- MATERIAL Made of durable metal material provides a long use life.
- ADVANTAGE With long drill core and square chisel, easy to lock the hole on the wood, can reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs.
- OPERATION Used with mortise and tenon machine with double effect, and electric drill, hammer and other tools is required for punching square hole in wood.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.02 Pounds
See On Amazon #17
uxcell PCB Drill Bits 0.6mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 10 Pcs
Asin: B07ZWHV7X7 | Model: a19091500ux0177 | PartNumber: a19091500ux0177
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.6mm; cutting edge length: 9.5mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 6mm to 6mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
Asin: B07PB9TDCG
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Diameter: 6mm to 6mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.18 Inches
See On Amazon #19
uxcell 20pcs 6mm Dia Ceramic Tube Insulated Electronic Wire Bundle Heat Insulation Protection Single Bore
Asin: B0951X9L8T | Model: a21012700ux0017 | PartNumber: a21012700ux0017
Advantage: Resistance To High Temperature, Heat Resistance, Temp Up To 1600 Celsius(2912 °F), 1000 Insulation Voltage, High Corrosion Resistance..
Application: It Can Be Used For Insulation Protection Of Cable Bundle, Ceramic Bead Electronic Wires, For Heat Insulation And Protection Of Electric Wire, Widely Used In Electric Heating Elements, Protection Sheaths, Insulators, Etc..
Tips: Avoid The Ceramic From Breaking To Scratch Your Hands, It Is Recommended That You Wear Gloves For Installation..
Length: 10Mm/0.39''. Bore Diameter: 6Mm/0.23''. Max Od: 9Mm/0.35''. Color: Grey.
Features
- Package: 20pcs x High-Temperature Resistant Insulating Ceramic Tube.
- Length: 10mm/0.39''. Bore Diameter: 6mm/0.23''. Max OD: 9mm/0.35''. Color: Grey
- Advantage: Resistance to high temperature, heat resistance, temp up to 1600 Celsius(2912 F), 1000 insulation voltage, high corrosion resistance.
- Tips: Avoid the ceramic from breaking to scratch your hands, it is recommended that you wear gloves for installation.
- Application: It can be used for insulation protection of cable bundle, ceramic bead electronic wires, for heat insulation and protection of electric wire, widely used in electric heating elements, protection sheaths, insulators, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell 4pcs Flanged Sleeve Bearings Plastic Bushings 9.6mm Bore x 12.7mm OD x 13.4mm Length Nylon Bushings, Black
Asin: B0CM6PG8J5
Function - Also Known As Plain Bearings, Plastic Bushings Are Mainly Used To Guide Or Reduce Friction In Linear Applications. They Can Help Reduce Noise And Vibrations Caused By Friction Between Moving Parts..
Notice - Pressed In With A Vise Or Punching Machine. They Can Be Held In Place With Adhesives Or Locking Screws..
Application - Used In Various Industrial Equipment Such As Conveyor Systems, Electrical Equipment, Household Equipment, Printing Machines, And Automotive Accessories..
Material - Nylon Flange Bushings, Made Of Self-Lubricating Nylon Material, Offer Excellent Load Capacity And Wear Resistance. This Makes Them Highly Durable And Low Maintenance..
Features
- Size - Bore Diameter: 9.6mm, Outside Diameter: 12.7mm, Total Length: 13.4mm, Flange Diameter: 15.8mm, Flange Thickness: 2.4mm.
- Material - Nylon flange bushings, made of self-lubricating nylon material, offer excellent load capacity and wear resistance. This makes them highly durable and low maintenance.
- Function - Also known as plain bearings, plastic bushings are mainly used to guide or reduce friction in linear applications. They can help reduce noise and vibrations caused by friction between moving parts.
- Application - Used in various industrial equipment such as conveyor systems, electrical equipment, household equipment, printing machines, and automotive accessories.
- Notice - Pressed in with a vise or punching machine. They can be held in place with adhesives or locking screws.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search