4 Pack 4mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.
Asin: B07PDYV4P3 | Model: YJ0272MA-AN-M | PartNumber: YJ0272MA-AN-M | Ean: 0717877039261 | UPC: 717877039261
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【High Cost Performance】Ancirs Flange Coupler Is Packaged With 4 Pack 4Mm Flange Shaft Coupling + 4X M3 Mini Hex Wrench + 8 X M3 Fastening Screw..
【Satisfaction Guarantee】 If You Are Not Completely Satisfied With Ancirs Flange Coupling Connector, Just Contact Us Through Amazon Message And We Will Provide Feasible Solution For You As Promised..
【Standard Specification】Inner Diameter: 4Mm. Cylinder Outer Diameter: 10Mm. Cylinder Height: 10Mm. Base Diameter: 22Mm. Base Height: 2Mm..
【Wide Range Of Use】Ancirs Flange Coupler Is Produced Based On International Flange Standard, Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
Features
- Sturdy Material Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Wide Range of Use Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor.
- High cost performance Ancirs flange coupler is packaged with 4 pack 4mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw.
- Standard Specification Inner Diameter: 4mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm.
- Satisfaction Guarantee If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised.
- See more on Amazon...
Brand: ANCIRS | Manufacturer: ANCIRS
See On Amazon Similar To 4 Pack 4mm Flange Coupling
#1
Supply Giant 6I49 Flexible PVC Coupling With Stainless Steel Clamps, 4", Black
Asin: B00HZSKZ0A | Model: 6I49 | PartNumber: 6I49 | Ean: 0804595048276 | UPC: 804595048276
May Be Used For Non-Pressure Drain, Waste, And Vent (Dwv) Piping Systems And Sewer Systems Indoors And Outdoors.
Each Rubber Fitting Is Marked With Part Number, Size, And Certifications.
Conforms To Astm C1173, Csa B602, Certified And Upc Approved, Rated For Underground Use.
Flexible Connectors Are Leak-Proof, Rot-Proof And Sealed Against Infiltration And Exfiltration,.
Features
- Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping
- Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration,
- May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors
- Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use
- Each Rubber Fitting is marked with part number, size, and certifications
- See more on Amazon...
Brand: Supply Giant | Manufacturer: Supply Giant
Dimensions: 6.00 x 4.00 x 4.00 inches | Weight: 0.80 pounds
Warranty: 4825
See On Amazon #2
Abuff 4-inch Duct Connector, 2 Pack Plastic Straight Pipe Flanges, Ventilation Ducting Connector for Heating Cooling Ventilation System
Asin: B086BM2RHD | Model: ABUS-DuctCnect-4in-Blk-200325 | PartNumber: ABUS-DuctCnect-4in-Blk-200325 | Ean: 0764690022352 | UPC: 764690022352
【Application】-- Perfectly Suited For Ducting Your Tumble Dryer, Bathroom Or Kitchen Extractor Fan, Hydroponics, In-Line Extract Fans, Or Cooker Hood..
【Easy To Install】-- Pre-Bored Mounting Holes For Easy And Secure Installation..
【Function】-- Make The Ventilation Pipe Connection Intact, Avoid Air Leakage, And Connect To The Ventilation Equipment Safely..
【Size】-- Inner Diameter: 4 Inch/100 Mm; Outer Diameter : 6 Inch/150 Mm; Height: 2.4 Inch/60 Mm; Compatible With 4 Inch Duct Tubes. 2-Pack..
Features
- HIGH QUALITY -- 4 inch Duct Connector is make of high quality ABS,compact and solid.
- SIZE -- Inner diameter: 4 inch/100 mm; Outer diameter : 6 inch/150 mm; Height: 2.4 inch/60 mm; Compatible with 4 Inch Duct tubes. 2-Pack.
- APPLICATION -- Perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or cooker hood.
- FUNCTION -- Make the ventilation pipe connection intact, avoid air leakage, and connect to the ventilation equipment safely.
- EASY TO INSTALL -- Pre-bored mounting holes for easy and secure installation.
- See more on Amazon...
Brand: ABuff | Manufacturer: Abuff
Dimensions: 0.10 x 6.00 x 6.00 inches
See On Amazon #3
18-8 Stainless Steel Hex Nut, Black Oxide Finish, DIN 934, Metric, M5-0.8 Thread Size, 8 mm Width Across Flats, 4 mm Thick (Pack of 100)
Asin: B009EFQIHG | Model: M5D934188B | PartNumber: M5D934188B | Ean: 7147905904095
Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Meets Din 934 Specifications.
18-8 Stainless Steel Provides Good Corrosion Resistance And Strength.
Features
- Hex nut tightens from the side with a wrench, enabling use when there is limited space above the nut
- 18-8 stainless steel provides good corrosion resistance and strength
- Black oxide finish offers mild corrosion resistance and lubricity
- Meets DIN 934 specifications
- See more on Amazon...
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.00 x 8.00 inches
See On Amazon #4
Duct Connector Flange 4 inch by Wadoy, 4 Pack ABS Quality Air Conditioner Exhaust Hose Flange Wall Mount for Heating Cooling Ventilation HVAC System
Asin: B09P149DL3
▶High Quality: Made Of New Quality Abs Material, High Strength, Corrosion Resistance. Long-Lasting To Use..
▶For Any Reason You Are Not Completely Satisfied, You Can Ask For A Replacement Or Full Refund..
▶Package Include: 4 Pcs 4 Inch Duct Connectors. Simple Design, Easy To Install..
▶Widely Application: Application For Fresh Air Ventilation Dust Connector. Suitable For Conveyor Drum Dryers, Bathroom Or Kitchen Exhaust Fans, Hydroponic, In-Line Extract Fans Or Range Hoods..
Features
- Function: For connection between pipe ends. 4 straight pipe flange ventilation ducting connector.
- Widely Application: Application for fresh air ventilation dust connector. Suitable for conveyor drum dryers, bathroom or kitchen exhaust fans, hydroponic, in-line extract fans or range hoods.
- High Quality: Made of new quality ABS material, high strength, corrosion resistance. Long-lasting to use.
- Package Include: 4 Pcs 4 inch Duct Connectors. Simple design, easy to install.
- For any reason you are not completely satisfied, you can ask for a replacement or full refund.
- See more on Amazon...
Brand: Wadoy | Manufacturer: Wadoy 4 inch Duct Connector Flange
See On Amazon #5
4Pcs 4mm Flange Coupling Connector, Rigid Guide Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors
Asin: B08334VLZG | Model: H416*4 | PartNumber: H416*4
Size:Inner Diameter: 4Mm,Height:12Mm,Fixed Hole Screw: M3..
Package Included:4Pcs 4Mm Flange Shaft Coupling + 1Pcs M3 Mini Hex Wrench + 8 X M3 Fastening Screw.
Widely Use: Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
Features
- Durable Material: The coupling connector is made of 45# steel( it is better than copper and aluminum alloys ), heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Widely use: used in model shaft connection, perfect accessories for RC Model motor.
- Size:Inner Diameter: 4mm,Height:12mm,Fixed Hole Screw: M3.
- Package included:4Pcs 4mm Flange Shaft Coupling + 1Pcs M3 Mini Hex Wrench + 8 x M3 Fastening Screw
- See more on Amazon...
Brand: daier | Manufacturer: daier
Dimensions: 1.57 x 1.97 x 0.59 Inches | Weight: 0.07 pounds
See On Amazon #6
4Pcs 5mm Rigid Flange Shaft Coupling, Guide Shaft Support Coupler High Hardness Metal Axis Bearing Fittings Motor Connector
Asin: B07L1FMBBC | Ean: 0666354110583 | UPC: 666354110583
Cylinder Size (Idxodxh): 5X10x10mm, Base Size: 22Mm Fastening Screw Hole: M3, Base Fixing Screw Hole: M3.
Flange Shaft Coupling For Connection Of Model Shaft To Rc Model Motor, Etc..
It Is Easy To Mount Other Components On The Shaft..
Made Of Metal, Surface Electroplated..
Features
- package includes: 4 pcs 5mm Flange Shaft Coupling with 8 Screws, 4 pcs Allen Wrench, 16 stainless steel Screws
- Made of metal, surface electroplated.
- Cylinder Size (IDxODxH): 5x10x10mm, Base Size: 22mm Fastening Screw Hole: M3, Base Fixing Screw Hole: M3
- It is easy to mount other components on the shaft.
- Flange shaft coupling for connection of model shaft to RC model motor, etc.
- See more on Amazon...
Brand: Hamineler | Manufacturer: Hamineler
Dimensions: 0.47 x 3.15 x 3.15 inches
See On Amazon #7
4 Inch Metal Straight Flange Connector, Ventilation Pipe Connector Wall Air Tube Hose Flange Adapter for Duct Fan Kitchen Air Vent Exhaust Ventilator Range Hood
Asin: B08XYNGDGY | Ean: 0730637298005 | UPC: 730637298005
Applications: Perfect To 4 Inch Diameter Of Ducting Hose/Pipe And Ventilation Products..
Compatibility: Great Suited For Ducting Tumble Dryer, Bathroom Or Kitchen Extractor Fan, Hydroponics, In-Line Extract Fans, Or Cooker Hood..
Easy To Use: You Only Have To Metal Straight Flange Connector On The Object You Need To Install At The Six Fixing Points..
Polished Design: Smooth Surface, Low Air Resistance, Provides A Quiet, Comfortable And Highly Efficient Ventilation During..
Features
- STRAIGHT FLANGE CONNECTOR: Made of galvanized sheet material for house indoor or outdoor using.
- POLISHED DESIGN: Smooth surface, low air resistance, provides a quiet, comfortable and highly efficient ventilation during.
- APPLICATIONS: Perfect to 4 inch diameter of ducting hose/pipe and ventilation products.
- EASY TO USE: You only have to metal straight flange connector on the object you need to install at the six fixing points.
- COMPATIBILITY: Great suited for ducting tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or cooker hood.
- See more on Amazon...
Brand: AHLSRHZ | Manufacturer: AHLSRHZ
See On Amazon #8
QCQIANG 5PCS 6mm Flange Coupling, Motor Shaft Coupler, Flanged Shaft Mount, for DIY Handmade Model
Asin: B09TQMKMY6 | Model: LS-240 | PartNumber: LS-240
Package: 5 X 6Mm Flange Shaft Coupling, 10 X M3 Fastening Screw, 20 X M3 Nut, 20 X M3*14 Socket Head Cap Screws, 6 X Hex Wrench.
Use: Suitable For All Kinds Of Diy Handmade Model Accessories.
Features: Easy Installation, Comes With A Wrench For Easy Use.
Size: Inner Diameter: 6Mm.
Features
- Material: Made of high-quality steel with good toughness and corrosion resistance
- Size: Inner Diameter: 6mm
- Package: 5 x 6mm Flange Shaft Coupling, 10 x M3 Fastening Screw, 20 x M3 Nut, 20 x M3*14 Socket head cap screws, 6 x Hex Wrench
- Features: Easy installation, Comes with a wrench for easy use
- Use: Suitable for all kinds of DIY handmade model accessories
- See more on Amazon...
Brand: QCQIANG | Manufacturer: QCQIANG
Dimensions: 0.82 x 2.83 x 2.09 inches | Weight: 0.11 pounds
See On Amazon #9
4 Way Electrical Junction Box, La Vane IP68 Waterproof 4 Way Cable Connector Lighting Connector Electric External Coupler, Cable Gland 4-14mm
Asin: B07JJDF6T6 | Ean: 8789221325933
✔ Ip68 Waterproof - Professional Waterproof Design, The Grade Of The Waterproof Is Up To Ip68, And It Has Fireproofing Function, Dust-Proof Function, Anti Impact Function, These Functions Make Sure It Could Be Used Under The Sun Or In Rainy Days;.
✔ Multifunctional Application - Suitable For Quick Connection Of Indoor And Outdoor Lighting, External Wiring, Extension And Connection Cable Or Tidy Up The Wire, Great Safe For Your Home, Garden, Farm Or Construction Plant. It Is Also Applicable To The Outdoor Lamps And Lanterns Connection;.
✔ Larger Inner Space - Junction Box Inside Size: 118*98*55Mm, Inside Is Loose Enabling More Fiddling About With Unwieldy Armoured Cable, And Using Larger Connector Boxes To Make Easier;.
✔ First-Grade Material - Made Of Abs + Pvc, Compression And Temperature Resistance, Tuv, Vde And Ce Approved, Curved Sawtooth Design, More Solid, And Outside Lugs For Screws So Easy To Fix To Wall, No Worry Aboot Water Input;.
Features
- ✔ 4 WAY JUNCTION BOX - 4 Way junction box, 1 input / 3 output, 2 pcs 3 pole screw fix terminal inside, cable connector gland available for cable diameter 4mm-14mm;
- ✔ FIRST-GRADE MATERIAL - Made of ABS + PVC, compression and temperature resistance, TUV, VDE and CE approved, curved sawtooth design, more solid, and outside lugs for screws so easy to fix to wall, no worry aboot water input;
- ✔ IP68 WATERPROOF - Professional waterproof design, the grade of the waterproof is up to IP68, and it has fireproofing function, dust-proof function, anti impact function, these functions make sure it could be used under the sun or in rainy days;
- ✔ LARGER INNER SPACE - Junction box inside size: 118*98*55mm, inside is loose enabling more fiddling about with unwieldy armoured cable, and using larger connector boxes to make easier;
- ✔ MULTIFUNCTIONAL APPLICATION - Suitable for quick connection of indoor and outdoor lighting, external wiring, extension and connection cable or tidy up the wire, great safe for your home, garden, farm or construction plant. It is also applicable to the outdoor lamps and lanterns connection;
- See more on Amazon...
Brand: La Vane | Manufacturer: La Vane
See On Amazon #10
Sydien 4Pcs 8mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector with Set Screws & Wrench
Asin: B07R8CJ36F | Ean: 0745679813604 | UPC: 745679813604
👍High Quality:Made Of Fine Plating Steel Which Is Hardened By Heat Treatment And Electroplated.Its Hardness Is More Better Than Ordinary Copper And Aluminum Alloy Material. Anti-Oil And Anti-Rust..
👍Excellent Performance:Compact Structure And Small Size.It Can Effectively Ensure The Alignment Of Two Shafts..
👍Widely Use:Suitable For Model Shaft Connection,Perfect Accessories For Rc Model Motor,Etc..
👍Low Inertia:Flange Shaft Couplings Is So Highly Sensitive That Can Quickly Switch The Working State..
👍Inner Diameter:8Mm/0.31''.Fastening Screw Hole:M4.Base Fixing Screw Hole:M4.Cylinder Outer Diameter:16Mm/0.63''.Cylinder Height:10Mm/0.39''.Base Diameter:32Mm/1.26''.Base Height:3Mm/0.12''..
Features
- Package Content:4Pcs Flange Shaft Couplings with 1Pc Mini Hex Wrench with Some Fastening Screws.
- Inner Diameter:8mm/0.31''.Fastening Screw Hole:M4.Base Fixing Screw Hole:M4.Cylinder Outer Diameter:16mm/0.63''.Cylinder Height:10mm/0.39''.Base Diameter:32mm/1.26''.Base Height:3mm/0.12''.
- HIGH QUALITY:Made of fine plating steel which is hardened by heat treatment and electroplated.Its hardness is more better than ordinary copper and aluminum alloy material. Anti-oil and anti-rust.
- LOW INERTIA:Flange shaft couplings is so highly sensitive that can quickly switch the working state.
- EXCELLENT PERFORMANCE:Compact structure and small size.It can effectively ensure the alignment of two shafts.
- WIDELY USE:Suitable for model shaft connection,perfect accessories for RC model motor,etc.
- See more on Amazon...
Brand: Sydien | Manufacturer: Sydien
Dimensions: 0.00 x 0.00 x 1.26 inches
See On Amazon #11
Supply Giant 6I49x4 Flexible Coupling, 4 inch, Black
Asin: B07FL4NXS2 | Model: 6I49x4 | PartNumber: 6I49x4 | Ean: 0804595277454 | UPC: 804595277454
Use: May Be Used For Non-Pressure Drain, Waste, And Vent (Dwv) Piping Systems And Sewer Systems Indoors And Outdoors.
Markings: Each Rubber Fitting Is Marked With Part Number, Size, And Certifications.
Conforms To Astm C1173, Csa B602, Certified And Upc Approved, Rated For Underground Use.
Sealed: Flexible Connectors Are Leak-Proof, Rot-Proof And Sealed Against Infiltration And Exfiltration,.
Features
- Universal fit: flexible coupling compatible with cast iron, Copper, plastic, and schedule 40 steel piping
- Sealed: flexible Connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,
- Use: may be used for non-pressure drain, waste, and vent (dwv) piping systems and sewer systems indoors and outdoors
- Conforms to ASTM C1173, CSA B602, certified and UPC approved, rated for underground use
- Markings: each rubber fitting is marked with part Number, size, and certifications
- See more on Amazon...
Brand: Supply Giant | Manufacturer: Supply Giant
Dimensions: 6.00 x 4.00 x 4.00 Inches
See On Amazon #12
Vent Systems 4" Inch Air Vent Duct Connector Flange Straight Ventilation Pipe Plastic Ducting Connector Plate For Cooling Heating Ventilation System HVAC 4" Inches
Asin: B08GY984B7 | Ean: 4751037230460
Easy To Install - Pre-Bored Holes To Ensure Easy And Secure Mounting To Wall, Ceiling Or Any Other Surface.
Vent Systems Products Are Made To Be Used For Home Improvement, Office Improvement. They Are Portable, High Quality And Long Durability..
Perfectly Suited Duct Flange To Connect Your Extractor Fan, Bathroom Fan, Kitchen Exhaust Fan, In-Line Extract Fan And Cooker Hood Or Any Other Indoor Outdoor Heating Cooling Pipe.
Duct Connector Flange - Easily Fit With Different 4" Inch Plastic Pipes For Hvac.
Features
- Made of High Quality ABS Plastic and perfectly designed for DIY and Trade
- Duct Connector Flange - Easily fit with different 4 inch plastic pipes for HVAC
- Easy to install - pre-bored holes to ensure easy and secure mounting to wall, ceiling or any other surface
- Perfectly suited Duct Flange to Connect your Extractor Fan, Bathroom fan, Kitchen exhaust Fan, In-line Extract fan and Cooker hood or any other indoor outdoor heating cooling pipe
- Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability.
- See more on Amazon...
Brand: Vent Systems | Manufacturer: Vent Systems
Dimensions: 2.64 x 5.08 x 5.08 inches | Weight: 0.10 Pounds
See On Amazon #13
4 PCS 4 Inch Duct Connector Flange Inlet Fitting Metal Straight Pipe Flange Ventilation Pipe Connector for Heating Cooling Ventilation HVAC System Silvery Gray
Asin: B0953M8HGT | Ean: 0696629989354 | UPC: 696629989354
【Wide Application】Our Duct Connector Flange Perfect For Tumble Dryer, Bathroom Or Kitchen Room Extractor Fan, Hydroponics, In-Line Extractor Fans, Cooker Hood, Air Ventilation Ducting.
【Package Include】4 Pcs 4 Inch Duct Flange Connector For Heating & Cooling Ventilation System; Enough Quantity For Your Daily Use, So Choose Us And Enjoy The Quality Smooth Surface Duct Connector Flange.
【Stylish Design】Our Striaght Flange Connector Adopts Beautiful And Round Design, Perfectly Decor Your House, The Ducting Connector Can Be Widely Applied To Homes, Cellars, Garages, Offices And More.
【Easy To Install】This Metal Duct Connector Flange Can Compatible With 4 Inch Tubes, The Hole Dia Approx. 4 In; Plus, Pre-Bored Mounting Holes For Easy And Secure Installation; The Ducting Connector Measures 5.2”Od, 3.7”Id, 2”Height (132*95*53Mm).
Features
- Quality Material These 4" duct flange made of high-quality iron, the surface of this straight pipe flange baked enamel, which are compact, solid, high temperature and aging resistance
- Easy to Install This metal duct connector flange can compatible with 4 inch tubes, the hole dia approx. 4 in; Plus, pre-bored mounting holes for easy and secure installation; The ducting connector measures 5.2 OD, 3.7 ID, 2 height (132*95*53mm)
- Wide Application Our duct connector flange perfect for tumble dryer, bathroom or kitchen room extractor fan, hydroponics, in-line extractor fans, cooker hood, air ventilation ducting
- Stylish Design Our striaght flange connector adopts beautiful and round design, perfectly decor your house, the ducting connector can be widely applied to homes, cellars, garages, offices and more
- Package Include 4 pcs 4 inch duct flange connector for heating & cooling ventilation system; Enough quantity for your daily use, so choose us and enjoy the quality smooth surface duct connector flange
- See more on Amazon...
Brand: ZOEYES | Manufacturer: ZOEYES
Weight: 0.10 pounds
See On Amazon #14
4Pcs 8mm Aluminum Alloy Rigid Flange Coupling Motor Guide Shaft Coupler for DIY Motor Connector
Asin: B0B28HL3QH | Model: T747 | PartNumber: T747
Easy Installation, Comes With A Wrench For Easy Use..
Package Include: 4Pcs 8Mm Flange Shaft Coupling, 1Pcs M4 Hex Wrench, 8Pcs Fastening Screws.
Inner Diameter: 8Mm/0.31 Inch, Total Height: 13Mm/0.51 Inch, Cylinder Outer Diameter: 16Mm/0.63 Inch, Cylinder Height: 10Mm/0.39 Inch, Base Diameter: 32Mm/1.26 Inch, Base Height: 3Mm/0.12 Inch, Mounting Hole Distance: 24Mm/0.94 Inch,Four Small Holes Diameter Is 4Mm/0.15 Inch,M4 Fastening Screws.
Widely Used:The Flange Shaft Coupling Is Widely Used For Shaft Connection, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily.Perfect Accessories For Rc Model Motor..
Features
- Material: Aluminum Alloy(lighter than 45# steel), hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Widely Used:The flange shaft coupling is widely used for shaft connection, which can fix one shaft to a plane and install other parts on the shaft easily.perfect accessories for RC Model motor.
- Easy installation, Comes with a wrench for easy use.
- Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,Four small holes diameter is 4mm/0.15 inch,M4 Fastening Screws
- Package Include: 4pcs 8mm flange shaft coupling, 1pcs M4 Hex Wrench, 8pcs fastening screws
- See more on Amazon...
Brand: daier | Manufacturer: daier
See On Amazon #15
Mishimoto 3" Straight Coupler, Black
Asin: B004MED2OG | Model: MMCP-30SBK | PartNumber: MMCP-30SBK | Ean: 0748354804331 | UPC: 748354804331
Heat-Resistant Embedded Fibers.
Length: 3 Inch.
Outlet: 3 Inch.
Mishimoto Lifetime Warranty.
Thickness: 4 Millimeter.
High Heat And Pressure Tolerances.
Inlet: 3 Inch.
100% Silicone Construction.
Features
- Length: 3.0 Thickness: 4mm ID: 3.0 OD: 3.4
- 100% silicone construction
- Heat-resistant embedded fibers
- High heat and pressure tolerances
- Mishimoto Lifetime Warranty
- Thickness: 4 millimeter
- Length: 3 inch
- Outlet: 3 inch
- Inlet: 3 inch
- See more on Amazon...
Brand: Mishimoto | Manufacturer: Mishimoto
Dimensions: 7.62 x 2.54 x 7.62 inches | Weight: 0.09 pounds
See On Amazon #16
Befenybay 8pcs 4mm to 5mm Brass Shaft Coupling Joint Connector with Screws for Small Motor (4mm to 5mm)
Asin: B0867R2N1R | Ean: 0303277255785 | UPC: 303277255785
【Dimensions】Inner Diameter: 4Mm To 5Mm. Outer Diameter: 9Mm. Height: 20Mm.
【Package Include】8Pcs 4Mm To 5Mm Shaft Coupling, 1Pcs M3 Hex Wrench, 32Pcs Fastening Screws.
【Widely Used】Shaft Coupling Is Produced Based On International Flange Standard, Widely Used For Shaft Connection.
Features
- Material Shaft coupling is made of brass
- Widely Used Shaft coupling is produced based on International Flange Standard, widely used for shaft connection
- Dimensions Inner Diameter: 4mm to 5mm. Outer Diameter: 9mm. Height: 20mm
- Package Include 8pcs 4mm to 5mm shaft coupling, 1pcs M3 hex wrench, 32pcs fastening screws
- See more on Amazon...
Brand: Befenybay | Manufacturer: Befenybay
See On Amazon #17
Aopin 4mm to 7mm Rigid Couplings Set Screw Shaft Stepper Motor, Length 25mm / 1" Motor Coupler Connector Rigid with Screw for 3D Printer, RC Robot, Car Model Shaft, CNC Machine, DIY Encoder 4 Pcs
Asin: B08V8PQMMT | Model: a20121102ap0176 | PartNumber: a20121102ap0176 | Ean: 0744337424145 | UPC: 744337424145
❤4Mm To 7Mm Rigid Couplings Set Screw Material: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Fixed By Screws; Main Color: Blue, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
❤Package: 4 Pcs Rigid Couplings Rigid With Screw. Aopin Recommends Using M2 Hex Wrench!.
❤Compensate For Axial And Radial Offset. Shock Mitigation, Vibration Absorption, High Transmission Efficiency, Noise Reduction, And Low Wear. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
❤Shaft Coupling Rigid Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
Features
- Rigid Couplings Set Screw Shaft Size: 4mm to 7mm / 0.16" to 0.28". Coupling With M4 Fastening Screws. Outer Diameter: 14mm / 0.55", Length 25mm / 1".
- Shaft Coupling Rigid Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car.
- 4mm to 7mm Rigid Couplings Set Screw Material: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Fixed By Screws; Main Color: Blue, Suitable For Working In High Temperature (-80 / +300 ) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move.
- Compensate For Axial And Radial Offset. Shock Mitigation, Vibration Absorption, High Transmission Efficiency, Noise Reduction, And Low Wear. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage.
- Package: 4 Pcs Rigid Couplings Rigid with Screw. Aopin Recommends Using M2 Hex Wrench!
- See more on Amazon...
Brand: Aopin | Manufacturer: Aopin-Hardware
Dimensions: 1.00 x 0.50 x 0.50 inches | Weight: 0.08 pounds
See On Amazon #18
Rebower 5mm Rigid Flange Coupling Connector Motor Guide Shaft Coupler (w Fastening Screw 1pack M1.5 Hex Wrench), [for DIY RC Model Stepper Motors Part]- 2Pack
Asin: B0C858BPWW
3-[Wide Application]: Flange Coupling Connector Is Mainly Installed Between The Lead Screw And The Motor Shaft, Providing The Function Of Shock Absorption, And Making The Transition More Stable And Smooth. Widely Used In Stepper Motors. Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motors, And Robotic Projects. Or You Can Use It For Rc Model Remote Control Boat Etc..
5-[Tips]: Please Confirm The Correct Size Before Ordering.
4-[Material]: Rigid Flange Coupling Made Of Iron Plating, Provides Great Corrosion Resistance And Antirust Ability For Long Service Life.. Durable Insulation, Not Easy To Deform Under Pressure, Makes Your Shaft More Stable.
2-[Size]: Inner Diameter: 8Mm/0.31 Inch; Total Height: 13Mm/0.51 Inch; Cylinder Outer Diameter: 16Mm/0.62 Inch; Base Plate Diameter: 32Mm/1.25 Inch; Diagonal Screw Hole Distance: 24Mm/0.94 Inch;Base Plate Hole Diameter: 4Mm/0.16 Inch; Material: Iron Plating.
Features
- 1-[Good Feature]: The wrench and screws are included, which can better install and fix the flange coupling, Easy fixation puts the coupling where you want it,so that the stepper motor is more stable when working, without recoil or swing
- 2-[Size]: Inner Diameter: 8mm/0.31 inch; Total Height: 13mm/0.51 inch; Cylinder Outer Diameter: 16mm/0.62 inch; Base Plate Diameter: 32mm/1.25 inch; Diagonal Screw Hole Distance: 24mm/0.94 inch;Base Plate Hole Diameter: 4mm/0.16 inch; Material: Iron Plating
- 3-[Wide Application]: Flange coupling connector is mainly installed between the lead screw and the motor shaft, providing the function of shock absorption, and making the transition more stable and smooth. Widely used in stepper motors. suitable for model shaft connection, perfect accessories for RC Model motors, and robotic projects. Or you can use it for RC Model remote control boat etc.
- 4-[Material]: Rigid flange coupling made of iron plating, provides great corrosion resistance and antirust ability for long service life.. Durable insulation, not easy to deform under pressure, makes your shaft more stable
- 5-[Tips]: Please confirm the correct size before ordering
- See more on Amazon...
Brand: Rebower | Manufacturer: Rebower
See On Amazon #19
Cionyce 4 PCS 6mm Flange Shaft Coupling, Rigid Flange Coupling Motors Guide Shaft Support Coupler, High Hardness Coupling Connector Flanged Shaft Mount for DIY RC Model Motors
Asin: B0B63P5VVX
【High-Precision】The Flange Coupling Is Made Of High-Precision Technology, Which Can Realize The Tight Connection Of The Two Shafts, And The Model Machine Is Not Easy To Separate During The Operation..
【Excellent After-Sales Service】We Focus On Quality And After-Sales Service. If You Are Dissatisfied With Our Products, Please Let Us Know. We Promise To Give You 100% Satisfactory After-Sales Service. No Risk. Don't Hesitate. Just Buy It..
【Wide Application】Flange Coupling Can Fix The Shaft On The Plane, And Can Easily Install Other Accessories On The Shaft, Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motors, Etc..
【High Quality Material】Made Of High Quality Iron, Hardened By Heat Treatment And Electroplating, Thereby Improving The Toughness And Corrosion Resistance Of The Rigid Flange Coupling, Making The Flange Shaft More Stable And Easy To Install And Replace..
Features
- What You will Get 4 x Flange Shaft Coupling, wrench included. Inner diameter: 6mm, cylinder outer diameter: 10mm, base diameter: 22mm, suitable for all kinds of DIY handmade model accessories.
- High Quality Material Made of high quality iron, hardened by heat treatment and electroplating, thereby improving the toughness and corrosion resistance of the rigid flange coupling, making the flange shaft more stable and easy to install and replace.
- High-precision The flange coupling is made of high-precision technology, which can realize the tight connection of the two shafts, and the model machine is not easy to separate during the operation.
- Wide application Flange coupling can fix the shaft on the plane, and can easily install other accessories on the shaft, widely used in model shaft connection, perfect accessories for RC model motors, etc.
- Excellent After-Sales Service We focus on quality and after-sales service. If you are dissatisfied with our products, please let us know. We promise to give you 100% satisfactory after-sales service. No risk. Don't hesitate. Just buy it.
- See more on Amazon...
Brand: Cionyce | Manufacturer: Cionyce
See On Amazon #20
Glvaner M8-1.25 Thread Size (20 pcs) Stainless Steel Hex Locknuts Lock Nuts Hexagon Locknuts 304 Stainless Steel Full Thread
Asin: B09B6V5FF7 | Model: GVN93008-20 | PartNumber: GVN93008-20 | Ean: 0793869893899 | UPC: 793869893899
Material: 304 Stainless Steel (A2-70) And No Exterior Finish, Greater Strength And Corrision Resistance Performance Than Regular Stianless Steel Or Zinc Plated Fasteners..
The Nylon Insert Helps Grip The Screw Thread To Prevent From Loosening. You Could Also Find The Matched Screws With Different Head Types In Our Shop With A Very Reasonable Price..
Nut Heigth: 8Mm; Width From Point To Point Of The Head: 14.3Mm; Feel Free To Contact Us If You Have No Idea About What Size To Choose..
Hex Drive Size: 13Mm; Package: 20 Pieces.
Features
- Thread Size: 8mm; Thread Pitch: 1.25mm; Thread Type: Coarse Thread; Thread Coverage: Full Thread
- Hex Drive Size: 13mm; Package: 20 pieces
- Material: 304 stainless steel (A2-70) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners.
- Nut Heigth: 8mm; Width from point to point of the head: 14.3mm; Feel free to contact us if you have no idea about what size to choose.
- The nylon insert helps grip the screw thread to prevent from loosening. You could also find the matched screws with different head types in our shop with a very reasonable price.
- See more on Amazon...
Brand: Glvaner | Manufacturer: Glvaner
See On Amazon
Looking For Something Else?
Search