Hot Rods Crankshaft Compatible with/Replacement for Suzuki RM 65 03 04 05 4014
Asin: B07PJVLCQQ | Model: 4014 | PartNumber: 4014 | Ean: 0712396885887 | UPC: 712396885887
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fully Rebuild Able With Genuine Hot Rods Connecting Rods And Bearings.
Two And Four Stroke Applications Available.
Multi-Cylinder Applications Are Sold Complete With Main Bearings.
Comaptible With/Replacement For Oems 13031-1467, 13037-1615, 13037-1616, K1303-11467.
Features
- Completely ready to install with proven Hot Rods connecting rods, bearings, thrust washers, and wrist pin bearings
- Comaptible with/Replacement for OEMS 13031-1467, 13037-1615, 13037-1616, K1303-11467
- Fully rebuild able with genuine Hot Rods connecting rods and bearings
- Multi-cylinder applications are sold complete with main bearings
- Two and four stroke applications available
- See more on Amazon...
Brand: Hot Rods | Manufacturer: Hot Rods
Warranty: 1 Year
See On Amazon Similar To Hot Rods Crankshaft Compatible with
#1
UGSHY 1 PC Automobile Crankshaft Sensor, Engine Crankshaft Position Sensor Replacement Parts 39180-2B000 391802B000, Solves Ignition Difficulties, Compatible with Modern Accessories (Black)
Asin: B0CMZ7KHXG | Model: UGCGQ2203BL-1PC | PartNumber: UGCGQ2203BL-1PC
Compatibility: Compatible With Modern Times, Replacement Part Number Is 39180-2B000 391802B000. It Is Recommended That You Check Your Car Model And Part Number Before Ordering To Ensure Fit..
After Sale: If You Have Any Question On Use, Kindly Contact Us At Any Time Directly, We Will Solve The Problem For You Within 24 Hours On Weekdays..
How To Replace: The Crankshaft Position Sensor Is Usually Installed At The Front End Of The Crankshaft (At The Pulley), The Rear End Of The Crankshaft Near The Large Flywheel, Or In The Middle Of The Crankshaft. Just Detach The Old Parts And Install The New Ones, Saving You A Lot Of Time..
Function: The Crankshaft Position Sensor Can Detect The Engine Speed, Determine The Fuel Injection Amount And Ignition Advance Angle, And Avoid The Phenomenon Of Reduced Fuel Injection Amount. Detecting The Angle Of Rotation Of The Crankshaft, Determining Any Position Of The Piston, And Determining The Ignition Time And Fuel Injection Time Are Helpful For The Best Time For Car Ignition..
Features
- Durable Material: The crankshaft position sensor is made of high-quality material, sturdy and durable, and its excellent strength brings you a long service life. Proper use of the crankshaft position sensor can provide a more accurate understanding of the working conditions of the car.
- Function: The crankshaft position sensor can detect the engine speed, determine the fuel injection amount and ignition advance angle, and avoid the phenomenon of reduced fuel injection amount. Detecting the angle of rotation of the crankshaft, determining any position of the piston, and determining the ignition time and fuel injection time are helpful for the best time for car ignition.
- Compatibility: Compatible with modern times, replacement part number is 39180-2B000 391802B000. It is recommended that you check your car model and part number before ordering to ensure fit.
- How to Replace: The crankshaft position sensor is usually installed at the front end of the crankshaft (at the pulley), the rear end of the crankshaft near the large flywheel, or in the middle of the crankshaft. Just detach the old parts and install the new ones, saving you a lot of time.
- After Sale: If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
- See more on Amazon...
Brand: UGSHY | Manufacturer: UGSHY
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon #2
LLII Crankshaft Position Sensor, Engine Crankshaft Position Sensor Automobile Replacement OEM#39180-2B000 391802B000 SU13885 Compatible with Modern Hyundai Tucson Accent Kia Rio Soul Dodge(Black)
Asin: B0D1JX71SM | Model: LLII-CMJL01 | PartNumber: LLII-CMJL01
【Compatible Models】The Engine Crankshaft Position Sensor Is Compatible With Modern Vehicles: 2012-2014 Accent, 2011-2015 Elantra, 2014-2015 Tucson, Compatible With Kia 2014-2015 Forte, 2014-2018 Forte5, 2014-2015 Forte Koup, 2012-2014 Rio, 2021 Seltos, 2010-2021 Soul Compatible, Also Compatible With Dodge 2012 Attitude..
【Super High Quality】Common Symptoms Of A Bad Crankshaft Sensor Include Intermittent Vehicle Stalling, Cel Illumination, Uneven Acceleration, Engine Misfire Or Vibration, Etc. Each Unit Of Our Crankshaft Sensors Is Manufactured To Original Factory Fit, Form And Function To Meet Or Exceed Original Equipment Performance..
【Upgrade Materials】The 39180-2B000 Crankshaft Position Sensor Is Made Of High-Quality Copper And Plastic, Well-Designed And Compact, Has Good Performance. It Is Very Easy To Install, Is Sturdy And Durable, And Can Help You Understand The Working Condition Of Your Car More Accurately..
【Replaces Part Numbers】Our Crankshaft Position Sensor Can Perfectly Replace Oem#39180 2B000, 391802B000, Su13885, S0410058, 0410058, 0902267, Tf-C465, 180-0735, 1800735. Please Confirm The Oem Part Number Before Purchasing..
Features
- Solves Ignition Difficulties Our automobile crankshaft sensor provides important signals for engine calculations by detecting engine speed, determining the fuel injection volume and ignition advance angle, avoiding the reduction of fuel injection volume, and ensuring the normal function and performance of the engine.
- Replaces Part Numbers Our crankshaft position sensor can perfectly replace OEM#39180 2B000, 391802B000, SU13885, S0410058, 0410058, 0902267, TF-C465, 180-0735, 1800735. Please confirm the OEM part number before purchasing.
- Compatible Models The engine crankshaft position sensor is compatible with modern vehicles: 2012-2014 Accent, 2011-2015 Elantra, 2014-2015 Tucson, compatible with Kia 2014-2015 Forte, 2014-2018 Forte5, 2014-2015 Forte Koup, 2012-2014 Rio, 2021 Seltos, 2010-2021 Soul compatible, also compatible with Dodge 2012 Attitude.
- Upgrade Materials The 39180-2B000 crankshaft position sensor is made of high-quality copper and plastic, well-designed and compact, has good performance. It is very easy to install, is sturdy and durable, and can help you understand the working condition of your car more accurately.
- Super High Quality Common symptoms of a bad crankshaft sensor include intermittent vehicle stalling, CEL illumination, uneven acceleration, engine misfire or vibration, etc. Each unit of our crankshaft sensors is manufactured to original factory fit, form and function to meet or exceed original equipment performance.
- See more on Amazon...
Brand: LLII | Manufacturer: LLII
Dimensions: 0.75 x 6.81 x 5.67 inches | Weight: 0.13 pounds
See On Amazon #3
Bittwee Car 19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Tool for Stubborn Bolts, Removal Holding Spanner kit for 19mm Engines
Asin: B0CN6PXSGR | Model: Harmonic Balancer Socket | PartNumber: Harmonic Balancer Socket
【Easy Installation】: When Repairing The Engine And Power System, It Can Be Used For Disassembly And Installation, Greatly Improving Convenience. The Design Feature Of This Tool Is A Hexagonal Shape, With A Hole In The Center Of The Tool That Allows For The Use Of Sleeves And Extension Rods To Help Loosen Or Tighten The Bolts Of The Pulley. Used When Loosening/Tightening Fixing Bolts..
【Perfect Gift】: Use A 1/2-Inch Circuit Breaker Lever Or Ratchet. The Crankshaft Pulley Wrench Adopts A Small, Compact, Central Hollow Design, Which Can Easily Enter The Narrow Engine Space When Repairing The Engine And Powertrain. Can Be Used For Engines That Use 19Mm Hexagonal Pulley Shock Absorber Bolts Or Other 19Mm Applications..
【Wide Application】: This Harmonic Balancer Socket Adopts A Deep Counterweight Design That Can Increase Torque, So You Can Quickly And Easily Loosen Stubborn Bolts. The Inner Diameter Is 1.57 Inches, While The Outer Diameter Is 1.97 Inches, Suitable For Various Engine Models. Please Confirm The Size You Need To Purchase Before Purchasing To Ensure A Pleasant Shopping Experience..
【Practical Function】: To Assist In The Removal And Installation Of Crankshaft Bolts That Are Compatible With The Engine. Used In Conjunction With A 1/2-Inch Breaking Rod Or Ratchet, This Crankshaft Pulley Disassembly Tool Can Prevent The Harmonic Damper Pulley From Rotating When You Remove And Set The Final Torque Specification Of The Pulley Bolt..
Features
- High Quality Material : This product is made of high-strength alloy steel, which is heavy in weight, durable in heavy work, very sturdy and resistant to falling, and will not easily crack. Coated with black anti-corrosion paint, achieving excellent anti-corrosion performance and a long service life.
- Practical Function : To assist in the removal and installation of crankshaft bolts that are compatible with the engine. Used in conjunction with a 1/2-inch breaking rod or ratchet, this crankshaft pulley disassembly tool can prevent the harmonic damper pulley from rotating when you remove and set the final torque specification of the pulley bolt.
- Easy Installation : When repairing the engine and power system, it can be used for disassembly and installation, greatly improving convenience. The design feature of this tool is a hexagonal shape, with a hole in the center of the tool that allows for the use of sleeves and extension rods to help loosen or tighten the bolts of the pulley. Used when loosening/tightening fixing bolts.
- Wide Application : This harmonic balancer socket adopts a deep counterweight design that can increase torque, so you can quickly and easily loosen stubborn bolts. The Inner Diameter is 1.57 inches, while the Outer Diameter is 1.97 inches, suitable for various engine models. Please confirm the size you need to purchase before purchasing to ensure a pleasant shopping experience.
- Perfect Gift : Use a 1/2-inch circuit breaker lever or ratchet. The crankshaft pulley wrench adopts a small, compact, central hollow design, which can easily enter the narrow engine space when repairing the engine and powertrain. Can be used for engines that use 19mm hexagonal pulley shock absorber bolts or other 19mm applications.
- See more on Amazon...
Brand: Bittwee | Manufacturer: Bittwee
Dimensions: 0.80 x 1.70 x 1.10 inches | Weight: 0.02 Pounds
Warranty: 0.2
See On Amazon #4
MotorbyMotor Universal Window Crank Shaft Extension Compatible with Chevy Camaro Corvette GM Buick Pontiac Olds, Door Latch Shaft Extension
Asin: B08K8GTR5B | Ean: 0692041339975 | UPC: 692041339975
With 1/2" Diameter Splined Shaft On The Window Regulator (Gm Spec For Shaft Diameter Is .41 To .46 Depending On Whether It Is A Window Crank, Door Latch Release, Wing Vent Crank Or Door Lock..
10 Year Warranty, Support Return, Refund And Replacement. Notice:Will Extend Your Shaft By 5/8'' To 11/16''. Shorter Extensions Are Not Available..
16 Spline Shaft In Which The Window Or Door Handle Is Attached To The Shaft With A "C" Clip..
Fits Other Domestic Cars And Trucks ( Jeep, Dodge, Chrysler Cars And And Even Imports Like Toyota, Mazda, Nissan, Honda, Subaru, Hyundai, Mitsubishi) ..
Features
- Fits Most 1950-1990 General Motors Products (Chevy, GMC, Pontiac, Buick, Olds, GM and Chevy Trucks, Camaro, Corvette, Cadillac).
- Fits Other Domestic Cars and Trucks ( Jeep, Dodge, Chrysler cars and and even imports like Toyota, Mazda, Nissan, Honda, Subaru, Hyundai, Mitsubishi) .
- With 1/2 Diameter Splined Shaft On the Window Regulator (GM Spec for Shaft Diameter is .41 to .46 Depending on Whether it is a Window Crank, Door Latch Release, Wing Vent Crank or Door Lock.
- 16 Spline Shaft in Which the Window or Door Handle is Attached to the Shaft with a C Clip.
- 10 Year Warranty, Support Return, Refund and Replacement. Notice:Will Extend Your Shaft by 5/8'' to 11/16''. Shorter Extensions are Not Available.
- See more on Amazon...
Brand: MotorbyMotor | Manufacturer: MotorbyMotor
See On Amazon #5
Hirificing Engine Camshaft Position Sensor Compatible with Chery, Car Camshaft Position Sensor Parts with Sealing Ring Replacement Number F01R00B003 for EPC Fault Light and Weak Start(Black)
Asin: B0D1MGW65J | Model: Hirificing-TLZCGQ01 | PartNumber: Hirificing-TLZCGQ01
【Professional Functions】The Car Camshaft Position Sensor Replacement Can Be Used To Collect The Dynamic Angle Signal Of The Camshaft To Determine The Fuel Injection Volume And Ignition Cycle, Which Helps The Best Time For Car Ignition And Avoids The Phenomenon Of Reduced Fuel Injection Volume..
【High Quality】Our Camshaft Position Sensor For Chery Meets Or Exceeds The Performance Of The Original Equipment It Replaces. Correct Use Of The Crankshaft Position Sensor Helps You Understand The Working Conditions Of Your Car More Accurately..
【Durable Material】 This Camshaft Position Sensor With Sealing Ring Is Made Of High-Quality Copper And High-Quality Plastic. It Has Stable Performance And Is Strong And Durable. It Is Not Easy To Deform And Age, And Can Be Used For A Long Time..
【Replace Part Number】Our Engine Camshaft Position Sensor In A Single Package With A Sealing Rubber Ring. It Can Completely Replace The Sensor With Replacement Part Number F01r00b003 And Is Matched With The Original..
Features
- Compatible with Chery Our crankshaft position sensor is compatible with Chery vehicles and can perfectly replace old or damaged sensors. Please check whether it matches your vehicle carefully before purchasing to avoid purchasing errors.
- Replace Part Number Our engine camshaft position sensor in a single package with a sealing rubber ring. It can completely replace the sensor with replacement part number F01R00B003 and is matched with the original.
- Professional Functions The car camshaft position sensor replacement can be used to collect the dynamic angle signal of the camshaft to determine the fuel injection volume and ignition cycle, which helps the best time for car ignition and avoids the phenomenon of reduced fuel injection volume.
- Durable Material This camshaft position sensor with sealing ring is made of high-quality copper and high-quality plastic. It has stable performance and is strong and durable. It is not easy to deform and age, and can be used for a long time.
- High Quality Our camshaft position sensor for Chery meets or exceeds the performance of the original equipment it replaces. Correct use of the crankshaft position sensor helps you understand the working conditions of your car more accurately.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Dimensions: 1.80 x 1.00 x 0.96 inches | Weight: 0.06 Pounds
See On Amazon #6
ECCPP 8940748020 Height Level Sensor Fit for 2004-2006 for Lexus RX330,2007-2009 for Lexus RX350,2006-2008 for Lexus RX400h Suspension Height Level Control Sensor
Asin: B0872QG3GX | Model: Adjustable | PartNumber: Adjustable
Advantages - Brand New Height Leveling Sensor Control Link, Tie Rod, Bolt, Nut.Shipping From Usa, Fast Shipping And Good Service. Factory Price With Higher Cost-Effective..
Notice - Please Check Picture, Part Number And Fitment Information Before Placing Order.Please Feel Free To Tell Us Via Email If Any Quality Problem Or Dissatisfaction Occurs..
Oe Numbers - 8940748020.
Function - Is Your Afs Light On Or Flashing? Adaptive Front Headlights System (Afs) Stopped Working? It Will Most Likely Be A Broken Height Sensor Link. Our Products Can Accurately And Quickly Solve This Issue To Provide Smoother Rides..
Features
- FITMENT - 2004-2006 for Lexus RX330,2007-2009 for Lexus RX350,2006-2008 for Lexus RX400h
- FUNCTION - Is your AFS light on or flashing? Adaptive front headlights system (AFS) stopped working? It will most likely be a broken height sensor link. Our products can accurately and quickly solve this issue to provide smoother rides.
- ADVANTAGES - Brand new Height leveling sensor control link, tie rod, bolt, nut.Shipping from USA, fast shipping and good service. Factory price with higher cost-effective.
- OE NUMBERS - 8940748020
- NOTICE - Please check picture, part number and fitment information before placing order.Please feel free to tell us via Email if any quality problem or dissatisfaction occurs.
- See more on Amazon...
Brand: ECCPP | Manufacturer: ECCPP
Dimensions: 1.57 x 5.71 x 1.97 inches | Weight: 0.07 pounds
See On Amazon #7
Hot Rods WB118 Wrist Pin Bearing
Asin: B00AX30X88 | Model: WB118 | PartNumber: WB118 | Ean: 0605942576592 | UPC: 605942576592
Compatible With/Replacement For: Honda Atc 250 R 1985-1986, Cr 250 R 1984-2007, Trx 250 R 1986, Yamaha Yz 250 1999-2019, Yz 250 X 2016-2019.
100% New Aftermarket Wrist Pin Bearings Built To Meet Oem Specifications.
Meets Or Exceeds Oem Specs For Fit And Performance.
Features
- Specs: Wrist Pin Bearings
- Meets or Exceeds OEM Specs for Fit and Performance
- Compatible With/Replacement For: Honda ATC 250 R 1985-1986, CR 250 R 1984-2007, TRX 250 R 1986, Yamaha YZ 250 1999-2019, YZ 250 X 2016-2019
- 100% New aftermarket Wrist Pin Bearings built to meet OEM specifications
- See more on Amazon...
First Available: 01/04/2013
Brand: Hot Rods | Manufacturer: Hot Rods
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: Manufacturer Warranty
See On Amazon #8
Hot Rods Wrist Pin Bearing WB116 Compatible with/Replacement for Yamaha YFS 200 Blaster 1988-2006, YFZ 350 Banshee 1987-2006
Asin: B00AX30X9C | Model: WB116 | PartNumber: WB116 | Ean: 0639853719687, 0605942576578 | UPC: 639853719687, 605942576578
Compatible With/Replacement For: Yamaha Yfs 200 Blaster 1988-2006, Yfz 350 Banshee 1987-2006.
100% New Aftermarket Wrist Pin Bearing Built To Meet Oem Specifications.
1-Year Warranty Protects You After Your Purchase. We're Confident That Our Products Will Work Flawlessly Once Installed In Your Vehicle. But In A Rare Case That It Does Not, We'll Replace It Anytime Within One Year Of Your Order. If You Have A Problem, We Will Take Every Step To Assist You, Contact Us For A Replacement..
Comaptible With/Replacement For Oem 93310-316H6-00.
Features
- Specs: Wrist Pin Bearing, Replacement 2-stroke wrist pin bearing.
- Comaptible with/Replacement for OEM 93310-316H6-00
- Compatible With/Replacement For: Yamaha YFS 200 Blaster 1988-2006, YFZ 350 Banshee 1987-2006
- 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement.
- 100% New aftermarket Wrist Pin Bearing built to meet OEM specifications
- See more on Amazon...
First Available: 01/04/2013
Brand: Hot Rods | Manufacturer: Hot Rods
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: 1 Year
See On Amazon #9
DB Electrical OSK0046 Hot Rods Output Shaft Kit Compatible with/Replacement for Yamaha Osk0046
Asin: B00M9IB884 | Model: OSK0046 | PartNumber: OSK0046 | Ean: 6903202257019
Compatible With/Replacement For: Yamaha Atv Raptor 660 2001-2005.
100% New Aftermarket Output Shaft Kit Built To Meet Oem Specifications.
1-Year Warranty Protects You After Your Purchase. We're Confident That Our Products Will Work Flawlessly Once Installed In Your Vehicle. But In A Rare Case That It Does Not, We'll Replace It Anytime Within One Year Of Your Order. If You Have A Problem, We Will Take Every Step To Assist You, Contact Us For A Replacement..
Meets Or Exceeds Oem Specs For Fit And Performance.
Features
- Specs: Output Shaft Kit
- Meets or Exceeds OEM Specs for Fit and Performance
- Compatible With/Replacement For: Yamaha ATV Raptor 660 2001-2005
- 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement.
- 100% New aftermarket Output Shaft Kit built to meet OEM specifications
- See more on Amazon...
First Available: 02/24/2015
Brand: Hot Rods | Manufacturer: Hot Rods
Dimensions: 1.00 x 4.60 x 3.70 inches | Weight: 0.20 pounds
Warranty: See Manufacturer
See On Amazon #10
Hot Rods WPK0062 Water Pump Kit
Asin: B00T6J4ZYI | Model: WPK0062 | PartNumber: WPK0062 | Ean: 8430525460768
Compatible With/Replacement For: Atv Yamaha Yfm 660 R Raptor 2001-2005.
100% New Aftermarket Water Pump Kits Built To Meet Oem Specifications.
1-Year Warranty Protects You After Your Purchase. We're Confident That Our Products Will Work Flawlessly Once Installed In Your Vehicle. But In A Rare Case That It Does Not, We'll Replace It Anytime Within One Year Of Your Order. If You Have A Problem, We Will Take Every Step To Assist You, Contact Us For A Replacement..
Meets Or Exceeds Oem Specs For Fit And Performance.
Features
- Specs: Water pump Kits, Water pump rebuild kit. Does not include clutch cover gasket
- Meets or Exceeds OEM Specs for Fit and Performance
- Compatible With/Replacement For: ATV Yamaha YFM 660 R Raptor 2001-2005
- 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement.
- 100% New aftermarket Water pump Kits built to meet OEM specifications
- See more on Amazon...
First Available: 02/24/2015
Brand: Hot Rods | Manufacturer: Hot Rods
Dimensions: 1.00 x 5.00 x 5.00 inches | Weight: 0.10 pounds
Warranty: See Manufacturer
See On Amazon
Looking For Something Else?
Search