2Pcs DC 5V 4 Channel Relay Module Board Shield with Optocoupler Isolation Suport High/Low Level Trigger Relay
Asin: B07PSGRFP7 | Model: WHJ-001 | PartNumber: WHJ-001 | Ean: 6934596031275
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Can Be Set High Or Low Level Trigger With Jumper.
With Green Power Light, Red Relay Status Indicator Light, Can Directly Reflect The Current Module Working Condition.
With Fault Tolerant Design, Humanized Terminals, Even If The Control Line Is Broken, The Relay Will Not Take Any Action.
Smd Optocoupler Isolation, Strong Driving Ability, Stable Performance; Trigger Current 5Ma.
Features
- Input voltage is 5V, the max load of interface is AC 250V/10A, DC 30V/10A
- SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
- Can be set high or low level trigger with jumper
- With Fault Tolerant Design, humanized terminals, even if the control line is broken, the relay will not take any action
- With green power light, red relay status indicator light, can directly reflect the current module working condition
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon Similar To 2Pcs DC 5V 4 Channel
#1
DROK DC 5V Power Converter, 5pcs Mini Voltage Buck Regulator DC 4.5-20V 12V 9V Step Down to 5V Reducer Transformer Board 3A 10W Adjustable Fixed Volt Output Step-Down Power Supply Stabilize
Asin: B096RC71DC
Output Voltage Adjustable Or Fixable --- These Tiny 12V To 5V Step Down Converters Can Be Variable At Output Voltage. The Small Board Is Default To Be Used For Output Voltage Adjustment. If You Want To Get Fixed Voltage Output, You Need To Cut Off The Pad A By Using A Sharp Thing Such As A Knife Then Weld Together The Port Of The Fixed Voltage You Want..
Note --- This Mini Buck Converter Is Really Very Tiny, Much Smaller Than A 1-Dollar Coin, Nearly A Half Of The Coin..
Protection And Enable Control --- Output Short Circuit Protection, But Please Do Not Keep Short Circuit For A Long Time. The Integrated Enable Port Defaults The Working Mode And It Will Be Off When It Is At Low Electric Level Off, Which Bring A Great Convenience For Users..
High Efficiency --- Conversion Efficiency: Up To 97% (Typical Value: >90% When Step Down 12V To 5V 2A)..
Features
- Parameter --- For DROK mini buck converter, Input voltage: DC 4.5-20V; Output voltage can be adjustable or fixed. Adjustable range: 1-16V; Fixed voltage: 1.8V, 2.5V, 3.3V, 5V, 9V, 12V; Output current: Max 3A (peak: 3A, long-term: within 2A); Power: 10W.
- High Efficiency --- Conversion efficiency: Up to 97% (typical value: >90% when step down 12V to 5V 2A).
- Output Voltage Adjustable or Fixable --- These tiny 12v to 5v step down converters can be variable at output voltage. The small board is default to be used for output voltage adjustment. If you want to get fixed voltage output, you need to cut off the Pad A by using a sharp thing such as a knife then weld together the port of the fixed voltage you want.
- Protection and Enable Control --- Output short circuit protection, but please do not keep short circuit for a long time. The integrated enable port defaults the working mode and it will be off when it is at low electric level off, which bring a great convenience for users.
- NOTE --- This mini buck converter is really very tiny, much smaller than a 1-dollar coin, nearly a half of the coin.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Weight: 0.04 pounds
See On Amazon #2
DEVMO 2PCS 5V Out, 6V to 12V in AMS1117-5.0 5.0V Step-Down Linear Voltage Regulator Module Compatible with Ar-duino
Asin: B07R55XCDR | Ean: 0741722788561 | UPC: 741722788561
★Pins For Input And Output Connectors Are Solder Onto The Board For Easy Connection..
★Package Includes: 2Pcs 6V - 12V In 5.0V Out Ams1117-5 Step-Down Linear Voltage Regulator Power Converter Module.
★A Pcb-Mounted Led Illuminates When Voltage Is Applied To The Module.
★Output: 5.0V At 800Ma Maximum Current With A 6V Input, 200Ma Maximum Current At 12V Input. The Maximum Current Is Limited By The Regulator's Internal Power Dissipation And It Cannot Provide 800Ma Output At All Input Voltages..
Features
- Input: 6V to 12V DC on + and - terminals
- Output: 5.0V at 800mA maximum current with a 6V input, 200mA maximum current at 12V input. The maximum current is limited by the regulator's internal power dissipation and it cannot provide 800mA output at all input voltages.
- Pins for input and output connectors are solder onto the board for easy connection.
- A PCB-mounted LED illuminates when voltage is applied to the module
- Package Includes: 2PCS 6V - 12V In 5.0V Out AMS1117-5 Step-Down Linear Voltage Regulator Power Converter Module
- See more on Amazon...
Brand: DEVMO | Manufacturer: DEVMO
See On Amazon #3
Multi-Channel Power Supply Module with 3.3V/5V/12V/ADJ, Adjustable Voltage Output Buck Converter with Four and high Performance LM2596 Chips
Asin: B08927SVJB | Model: Tosunyh7xpog620e | PartNumber: Tosunyh7xpog620e | Ean: 3458520095315
Overcurrent Protection: The Buck Converter Has An Overcurrent Production Fuse That Effectively Protects The Module From Overcurrent Damage..
The Performance Of This Switching Power Supply Module Is Strong And Stable, You Can Rest Assured..
Made Of High-Quality Material, With Exquisite Workmanship, Durable In Use..
Lm2596 Excellent Chip: The Voltage Stabilizer Is Equipped With Four High Quality And High Performance Lm2596 Chips, Which Can Provide Stable And Accurate Output..
Features
- 4-way multi-output: the buck converter has 4 different voltage output terminals (3.3V, 5V, 12V, ADJ), which can withstand a wide range of input range (DC 5-40V) and can meet different applications.
- LM2596 excellent chip: the voltage stabilizer is equipped with four high quality and high performance LM2596 chips, which can provide stable and accurate output.
- Overcurrent protection: the buck converter has an overcurrent production fuse that effectively protects the module from overcurrent damage.
- Made of high-quality material, with exquisite workmanship, durable in use.
- The performance of this switching power supply module is strong and stable, you can rest assured.
- See more on Amazon...
Brand: Tosuny | Manufacturer: Tosuny
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.15 pounds
See On Amazon #4
Eagles Relay Module with Isolated Optocoupler High or Low Level Trigger Expansion Board Compatible with Arduino Relay (5V Relay 4 Channel, 2PCS)
Asin: B0D3D2QWB8 | Model: Relay Module | PartNumber: Relay Module | Ean: 5714403704988
Power Indicator (Green), 4-Way Relay Status Indicator (Red), It Is 4 Channel Isolated 5V 10A Relay Module,Each Channel Of The Module Can Be Set To High Level Or Low Level By Jumper Trigger..
Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
Each Relay Can Individually Switch On/Off By An Opto-Isolated Digital Input, Standard Interface Can Be Directly Connected With Microcontrollers And Be Controlled Directly By A Wide Range Of Microcontrollers Compatible With Arduino, Avr, Pic, Arm, Dsp, Etc. All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
This Module Design With Fault-Tolerant, Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation,Triggering More Reliable And Stable..
Features
- The 4 channel optocoupler relay module adopts relay, the maximum load of normally open interface: AC 250V/10A, DC 30V/10A. Using patch optocoupler isolation, strong driving ability, stable performance, touch sending current 5mA.
- This module design with fault-tolerant, even if the control line breaks, the relay will not move; with optical coupling isolation,triggering more reliable and stable.
- Power indicator (green), 4-way relay status indicator (red), It is 4 Channel Isolated 5V 10A Relay Module,Each channel of the module can be set to high level or low level by jumper trigger.
- Each relay can individually switch on/off by an opto-isolated digital input, standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers compatible with Arduino, AVR, PIC, ARM, DSP, etc. all interfaces are available through a direct connection terminal leads, very convenient.
- Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- See more on Amazon...
Brand: Eagles | Manufacturer: Eagles
Dimensions: 0.75 x 2.87 x 1.97 inches
See On Amazon #5
V TELESKY 2PCS L293D Motor Driver Expansion Board Mini L293D Motor Driver Module Small Board Motor Board
Asin: B0D21T89VN
3. Up To 2 Stepper Motors For Forward And Reverse Control, Single/Double Step Control, Interleaving Or Micro Step And Rotation Angle Control..
5. The Pull-Down Resistor Ensures That The Motor Stays In A Stopped State When Powered On..
4. 4-Way H-Bridge: The L293d Chip Provides. 0.6A (Peak 1.2A) Current Per Bridge And Comes With Thermal Power Off Protection, Ranging From 4.5V To 36V..
2. Up To 4 Bidirectional Dc Motors And 4 Pwm Speed Regulation Channels (Approximately 0.5% Resolution).
Features
- 1. Two 5V servo motor (servo) ports connected to Arduino's high-resolution and high-precision timer - no jitter
- 2. Up to 4 bidirectional DC motors and 4 PWM speed regulation channels (approximately 0.5% resolution)
- 3. Up to 2 stepper motors for forward and reverse control, single/double step control, interleaving or micro step and rotation angle control.
- 4. 4-way H-bridge: The L293D chip provides. 0.6A (peak 1.2A) current per bridge and comes with thermal power off protection, ranging from 4.5V to 36V.
- 5. The pull-down resistor ensures that the motor stays in a stopped state when powered on.
- See more on Amazon...
Brand: V TELESKY | Manufacturer: V TELESKY
See On Amazon #6
#fepart 5pcs/lot 0.9-5V to 5V DC-DC Step-Up Power Module Voltage Boost Converter Board 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V - (Color: 5V) #fepart320477
Asin: B0CXSJ54HN
Package Included: 5 Pieces..
Features
- You are Choosing: Color: 5V . Please check all carefully (photos and model) and make sure it will compatible with your original one. Type: Voltage Regulator
- Package included: 5 Pieces.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #7
#fepart DC-DC Step Down Module Two-Wire Voltmeter 5 V USB Charger or Power Supply Input 4.5V-40V Output 5V/2A #fepart306721
Asin: B0CSJX5S5V
Package Included: 1 Set Only. Type: Other.
Features
- Please check all carefully (photos and model) and make sure it will compatible with your original one. Model Number: .
- Package included: 1 Set ONLY. Type: Other
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #8
DC-DC Step Down Power Supply Module 5V 5A 4-Channel USB LED Digital Display Buck Converter 4USB for Smart Home/Robot
Asin: B09317W81K | Ean: 4852343732119
Features
- DC-DC Step Down Power Supply Module 5V 5A 4-Channel USB LED Digital Display Buck Converter 4USB for Smart Home/Robot
- See more on Amazon...
Brand: Lufasa | Manufacturer: Lufasa
See On Amazon #9
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
Asin: B00LW15A4W | Model: 3-01-0340 | PartNumber: 3-01-0340 | Ean: 0702082655948 | UPC: 702082655948
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #10
SunFounder Lab 4 Relay Module 5V 4 Channels Relay Module Compatible with Arduino R3 1280 Arm PIC AVR STM32
Asin: B00E0NSORY | Ean: 0520141421286 | UPC: 520141421286
Standard Interface That Can Be Controlled Directly By Microcontroller (Compatible With Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic)..
Applications: Supports All Mcu Control, The Industrial Field, Plc Control, Smart Home Control, Vcc System Power And So On..
Indication Led’S For Relay Output Status..
Equiped With High-Current Relay, Ac250v 10A ; Dc30v 10A..
Features
- 5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current.
- Equiped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED s for Relay output status.
- Applications: Supports all MCU control, The industrial field, PLC control, Smart home control, VCC system Power and so on.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.80 x 3.20 x 2.90 Inches | Weight: 0.09 Pounds
See On Amazon #11
ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
Asin: B08PP8HXVD | Model: ANMBEST_MD314-319 | PartNumber: ANMBEST_MD314-319 | Ean: 7903265708922
Reliable: Fault-Tolerant Design, Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation, Triggering More Reliable, More Stable..
High/Low Level Trigger Can Be Selected By Jumper. Very Versatile, You Can Reverse The Input Logic With The Jumper..
Easy To Install: Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
Equipped With High-Current Relay, Maximum Load: Ac250v 10A, 15A 125Vac, Dc30v 10A; Trigger Current Of Opto-Isolator: 5Ma..
Features
- It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
See On Amazon #12
Teyleten Robot PCA9685 16 Channel 12 bit PWM Servo Motor Driver I2C IIC Module for MG90S SG90 MG995 Compatible with Arduino Raspberry Pi (2pcs)
Asin: B0CNVBWX2M
Frequency: 40-1000Hz;Channel Number: 16 Channel.;Resolution: 12 Bit;Voltage: Dc 5-10V.
Size: 60*25Mm/2.36"*0.98".
I2c Input, Control 16 Pwm Output, You Can Control The 16 Way Servo Motor..
Features
- Using only two pins, control 16 free-running PWM outputs
- I2C input, control 16 PWM output, you can control the 16 way servo motor.
- Frequency: 40-1000Hz;Channel number: 16 channel.;Resolution: 12 bit;Voltage: DC 5-10V
- Size: 60*25mm/2.36*0.98
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.79 x 2.36 x 0.98 Inches
See On Amazon #13
ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32
Asin: B09ZQRLD95
With Power Indicator,8-Way Road Has A Status Indicator. With A Relay Coil To Absorb The Diode Protection..
The 8 Channels Are Optically Isolated, Safe, Reliable, Anti-Interference. Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control。For A Complete Data Sheet For This Relay Board, Please Download It From: Http://Dwz.Win/Uhw.
Standard Interface That Can Be Controlled Directly By Microcontroller (Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic).
Each Relay Has Normally Open And Normally Closed Contact. Can Be Selected By Jumper Relay And Ttl Or Ground..
Features
- 5V 8-Channel Relay interface board, each one needs 70mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
- Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #14
12V Relay Remote Switch Wireless RF Remote Control Switch 4 Channel Relay Module 433Mhz Transmitter Receiver Kit Universal Remote Controller for Lights Ceiling Fan Garage Door Opener Gate Car & More
Asin: B08CCVJWL9 | Ean: 0751450699190 | UPC: 751450699190
3. Remote Relay With 3 Modes Of Operation – Use A Jumper To Configure 3 Modes Of Operating Selection Pulse / Momentary, Hold / Toggle And Latching Mode. 4 Independent Relay Channels Can Either Work Together (In Latching) For Polarity Reversing Or Individually (In Pulse / Hold) To Control Different Electronics, Such As Two Channels For Garage Door Controller Motor, The Other Two For Entry Lights..
5. Wide Applications – The Wireless Remote Control Switch Can Be Widely Used In Short And Long Range Turn Devices On / Off Wirelessly, Anti-Theft Alarm Control Panels, Lifts, Boats, Motor-Driven Curtain, Roller Blinds, Garage Door Openers, Gate Barriers, Motorcycles, Vehicles, Cars, Trucks, Rvs, Electric Generator, Electric Door Release Locks, Windows, Manual Switches Extender, Led Lighting Lamp Bulbs And Strips, Entrance And Access Control Etc..
4. Easy And Flexible Switch Relay – The Wireless Relay Kit Is A Perfect Remote Switch For Those Hobbyists With Home Automation Diy Projects Or Business Industrial Electrical. The Power Input Voltage Is 12V, And Each Receiver’S Relay Capacity Is Up To 20A@14Vdc And 20A@125Vac..
2. Home Automation Security Relay - Learning Code Of 433Mhz Wireless Transmission Module Has High-Level Security For Its Low Repetitive Rate And Re-Learn Mode, By Which It Can Delete The Old Code And Re-Learn A New Code When A Remote Control Get Lost, So You Are Always In Control Of It..
Features
- 1. Wireless Remote Control Kits - The DC 12 volt relay switch is equipped with 4 channel wireless receiver that built with high stability, security and performance. While the included 2 remote controls transmit strong signal that can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, max range up to 164ft/50m with no obstacle.
- 2. Home Automation Security Relay - Learning code of 433mhz wireless transmission module has high-level security for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it.
- 3. Remote Relay with 3 Modes of Operation Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights.
- 4. Easy and Flexible Switch Relay The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input voltage is 12V, and each receiver s relay capacity is up to 20A@14VDC and 20A@125VAC.
- 5. Wide Applications The wireless remote control switch can be widely used in short and long range turn devices on / off wirelessly, anti-theft alarm control panels, lifts, boats, motor-driven curtain, roller blinds, garage door openers, gate barriers, motorcycles, vehicles, cars, trucks, RVs, electric generator, electric door release locks, windows, manual switches extender, LED lighting lamp bulbs and strips, entrance and access control etc.
- See more on Amazon...
Brand: Aubric | Manufacturer: Aubric
Dimensions: 2.95 x 2.05 x 0.98 inches | Weight: 0.25 pounds
See On Amazon #15
HiLetgo 2pcs TDA2050 Mono Audio Amplifier Module Digital Mono Amplifier Board AMP DC/AC 5-24V Output 5W-120W for Speaker
Asin: B0CDWTL57H | Model: TDA2050 | PartNumber: TDA2050
Input Voltage: Dc/Ac 5-24V Output Power: 5W-120W.
Tda2050 Digital Mono Audio Amplifier Board.
Features
- TDA2050 Mono Audio Amplifier Module
- TDA2050 Digital Mono Audio Amplifier Board
- Input voltage: DC/AC 5-24V Output power: 5W-120W
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #16
Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10
Asin: B07WQH63FB | Model: VA-0166 | PartNumber: VA-0166 | Ean: 0793118392173 | UPC: 793118392173
【Fault-Tolerant Design】The Relay Will Not Operate Even If The Control Line Is Disconnected..
【High Compatibility】The Relay Module Can Be Controlled Directly By 5V Logic Signals From Microcontroller(8051, Avr, Pic, Dsp, Arm, Raspberry Pi, Msp430, Ttl Logic Etc).
【Universal Interface】Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
【Load Range】No(Normally Open) Maximum Load < Ac 250V/10A, < Dc 30V/10A. Trigger Current Of Opto-Isolator: 5Ma..
Features
- Control Devices The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
- Load Range NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- Fault-tolerant Design The relay will not operate even if the control line is disconnected.
- Universal Interface Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High Compatibility The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
See On Amazon #17
1 Channel Relay Shield Module, 3PCS DC 5V Indicator Light LED Module for Arduino R3 MEGA 2560 1280 ARM PIC AVR STM32 Raspberry Pi MCU DSP Official Boards Shield (3PCS)
Asin: B0899L3CC3 | Model: 1 Channel Relay | PartNumber: 1 Channel Relay | Ean: 0701715435582 | UPC: 701715435582
The Control Signal Dc Or Ac, 220V Ac Load Can Be Controlled..
Input Section: Vcc: Connect 5V Positive Pole Power Supply Gnd: Connect 5V Negative Pole Power Supply.
This Relay Can Be Used Not Only As A Microcontroller Development Board Module, But Also As A Home Appliance Controller..
5 V-12V To Ttl Control Signal.
Features
- 5V Relay Module
- 5 V-12V to TTL control signal
- The control signal DC or AC, 220V AC load can be controlled.
- This relay can be used not only as a microcontroller development board module, but also as a home appliance controller.
- Input Section: VCC: Connect 5V Positive Pole Power Supply GND: Connect 5V Negative Pole Power Supply
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
Dimensions: 0.01 x 0.01 x 0.01 Inches
See On Amazon #18
4 pcs DC 5V 1 Channel Relay Module Board Shield High/Low Level Trigger with Optocoupler
Asin: B079FJSYGY | Model: WJ-00010 | PartNumber: WJ-00010 | Ean: 6941595311734
Smd Optocoupler Isolation, Strong Driving Ability, Stable Performance; Trigger Current 5Ma.
The Module Can Be Set High Or Low Triggered By Jumper.
The Module Voltage 5V.
Maximum Load: Ac 250V/10A, Dc 30V/10A.
Features
- The module uses genuine quality relay, normally open interfaces
- Maximum load: AC 250V/10A, DC 30V/10A
- SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
- The module voltage 5V
- The module can be set high or low triggered by jumper
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #19
2pcs TPA3116D2 Class D Stereo DC 5V 24V 2x50W High Power, Digital Audio Amplifier, Subwoofer Power Amplifier Board, Suitable for Home Audio car Speakers, DIY
Asin: B08NFCCGC2 | Model: TPA3116D2 | PartNumber: TPA3116D2 | Ean: 0788465535618 | UPC: 788465535618
★High-Performance Metal Polyester Film Inductors, High-Performance Capacitors (Maximum Temperature Resistance 105 Degrees), Input Reverse Connection Protection, Over-Voltage/Low-Voltage Protection.
★3.5Mm Audio Port Input.
★Excellent Performance And Cost-Effective, Widely Used In Store Drainage, Home Theater, Bookshelf Audio, Car Speakers, Diy Audio, Etc..
★Dual Channel Stereo, Output Power: 2*50W, Excellent Performance.
Features
- Using TPA3116D2 chip, 4.5V-26V wide voltage input, high efficiency class D operation, advanced modulation system configuration, multiple switching frequencies, AM interference prevention, master-slave mode synchronization
- Dual channel stereo, output power: 2*50W, excellent performance
- High-performance metal polyester film inductors, high-performance capacitors (maximum temperature resistance 105 degrees), input reverse connection protection, over-voltage/low-voltage protection
- Excellent performance and cost-effective, widely used in store drainage, home theater, bookshelf audio, car speakers, DIY audio, etc.
- 3.5mm audio port input
- See more on Amazon...
Brand: Doudou | Manufacturer: Doudou
See On Amazon #20
Hosyond 4Pack 4 Channel DC 5V Relay Module with Optocoupler Relay Board for Arduino Raspberry Pi MEGA2560
Asin: B0C2Z8JF5R | Ean: 0732214748170 | UPC: 732214748170
High Level Or Low Level Trigger. Pull In At Low Level And Release At High Level. The Status Indicator Is On When It Is Pull In, And It Is Release When It Is Released..
Widely Used In All Mcu Control, Industrial Fields, Plc Control, Smart Home Control..
The 4 Channel Relay Interface Board Can Directly Control Arduino, Avr, Pic, Arm, Plc And Other Microcomputers, And Can Also Control Various High-Current Electrical Appliances And Other Equipment..
The Relay Has A Standard Interface And Can Be Directly Connected To The Microcontroller, Which Is Convenient For Wiring. Package Contains 10Pin Male To Female Dupont Wires..
Features
- The power supply voltage of the relay module is DC5V. The maximum output load is AC250V 10A and DC30V 10A.
- The relay has a standard interface and can be directly connected to the microcontroller, which is convenient for wiring. Package contains 10pin male to female DuPont wires.
- High Level or Low Level Trigger. Pull in at low level and release at high level. The status indicator is on when it is pull in, and it is release when it is released.
- The 4 channel relay interface board can directly control Arduino, AVR, PIC, ARM, PLC and other microcomputers, and can also control various high-current electrical appliances and other equipment.
- Widely used in all MCU control, industrial fields, PLC control, smart home control.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Warranty: NO
See On Amazon
Looking For Something Else?
Search