6pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board Module
Asin: B07PZT3ZW2 | Model: . | PartNumber: . | Ean: 0673400168474 | UPC: 673400168474
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.★ In Discharge Mode (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output.
★ Allow Discharge While Charging. (Note: At This Time Output Voltage 4.7 / 5V).
★ The First Time The Load Is Connected, The Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On.
★ 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection.
Features
- MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)
- 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection
- In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output
- The first time the load is connected, the output is automatically turned on. If the load is less than 50mA, the output will be automatically turned off after 30 seconds; if the load is greater than 50mA, the output will be automatically turned on
- Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 0.98 x 0.63 inches
See On Amazon Similar To 6pcs 2A 5V Charge Discharge
#1
DWEII 10PCS Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB for DIY Charger (no Welding Version)
Asin: B09YD5C9QC | Ean: 0701715515956 | UPC: 701715515956
❃❃It Supports The External Key, Which Is Connected To The K Point And The Output Negative Pole. Short Press To Turn On The Power Display And Turn On The 5V Output. Two Consecutive Short Presses Will Turn Off The Power Display And Turn Off The 5V Output..
❃❃1; When The Charging Current Drops To 100Ma After Reaching The Final Floating Charging Voltage, The Charging Cycle Will Be Automatically Terminated; 2; When The Battery Voltage Drops Below 4.1V, The Charging Cycle Starts Again. 3; When The Battery Voltage Is Lower Than 2.8V, The Battery Will Be Pre Charged With A Current Of 180Ma..
❃❃When The Load Current Is Less Than 50Ma Continuously, The Output Will Be Turned Off..
❃❃Usb Is No Welding Version.
Features
- 10PCS ( no welding version) Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB For DIY Charger
- USB is no welding version
- It supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
- When the load current is less than 50mA continuously, the output will be turned off.
- 1; When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated; 2; When the battery voltage drops below 4.1V, the charging cycle starts again. 3; When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
- See more on Amazon...
Brand: DWEII | Manufacturer: DWEII
See On Amazon #2
Battery Charger Module USB TP4056 3.7V 4.2V to 9V 5V 2A Charge Discharge Integrated Step Up Module,18650 Lithium Li-ion Battery Charger Module(6 PCS)
Asin: B098989NRZ | Ean: 8414825638416
Instructions For Use: Tp4056 Charger Module Can Be Used For Multimeter To Convert To Charge Lithium Batteries. Vin+ Port Input 5V Solar Panel, Bat+ Port Can Output 4.2V To Charger 3.7V 18650 Battery..
Package Contains: 6 * Lithium Li-Ion Battery Charger Module.
Small And Delicate: 1.3In*0.92In/33Mm*23Mm.
Features: Battery Charger Module Combines The Tp4056 Battery Charger With A Boost Circuit. Adds A Battery And Converts A Low Power Dc Device To A Usb Rechargeable Device..
Features
- Material: Battery charger module made of electronic components.Can be used for multimeter, converted to lithium battery charging.
- Features: Battery charger module combines the TP4056 battery charger with a boost circuit. Adds a battery and converts a low power DC device to a USB rechargeable device.
- Instructions for use: TP4056 Charger Module can be used for multimeter to convert to charge lithium batteries. VIN+ port input 5V solar panel, BAT+ port can output 4.2V to charger 3.7V 18650 battery.
- Small and delicate: 1.3in*0.92in/33mm*23mm
- Package contains: 6 * Lithium Li-ion Battery Charger Module
- See more on Amazon...
Brand: ABSOK | Manufacturer: LESEXS
Weight: 0.04 pounds
See On Amazon #3
Discharge Integrated Charging Protection Module :6pcs 2A 5V Module 3.7V 4.2V for 186 50 Lithium Battery Charging Boost Mobile Power Protection PCB Board
Asin: B0BGJJ4YXR
Discharge Mode: (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output.
Note: Allow Discharge While Charging. (Note: At This Time Output Voltage 4.7 / 5V).
Ioad Connection : The First Time The Load Is Connected, The Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On.
Protective Function : 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection.
Features
- Charging voltage: DC 4.5V-5.5V (DC 5V recommended) Charging current: 0-2.1A Charging quiescent current: 100uA Full voltage: 4.2V+ -1% Discharge current: 0-2.4A Discharge quiescent current: 50uA Discharge efficiency: up to 96% Output voltage: 5V Output current: 0-2.4A Ambient temperature: -20 to + 85 PCB board process: Shen Jin Size : 25 * 16 * 4mm
- Protective function : 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection
- Discharge mode: (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output
- Ioad Connection : The first time the load is connected, the output is automatically turned on. If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on
- Note: Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)
- See more on Amazon...
Brand: TAHULU | Manufacturer: TAHULU
Dimensions: 0.20 x 0.98 x 0.59 inches
See On Amazon #4
2A 5V Lithium Battery Charging Discharge Module USB C 3.7V/4.2V Lithium Battery Charging Boosting Module with Charging Discharging Protection
Asin: B0CD7ZC62Y | Model: 1 | PartNumber: 1 | Ean: 0760606710764 | UPC: 760606710764
Protection: It Is Equipped With Double Layer Charging And Discharging Protection..
Guarantee: Any Questions Or Concerns, Please Feel Free To Contact Us So We Can Do Our Best To Solve It. We Will Strive To Provide The Highest Quality Service For You..
Lightweight: It Is A Small Volume And High Power Module, Which Is Suitable For Diy..
Usb & Type C: Type-C Interface Has The Same Input And Output Port And Supports Mobile Phone Charging Protocol..
Features
- Voltage & Current: The work voltage is 5V, charging and discharging can be switched automatically. And Maximum output current si 3.1A.
- USB & Type C: Type-C interface has the same input and output port and supports mobile phone charging protocol.
- Protection: It is equipped with double layer charging and discharging protection.
- Lightweight: It is a small volume and high power module, which is suitable for DIY.
- Guarantee: Any questions or concerns, please feel free to contact us so we can do our best to solve it. We will strive to provide the highest quality service for you.
- See more on Amazon...
Brand: MiOYOOW | Manufacturer: MiOYOOW
See On Amazon #5
HUAREW 5V 2A Charge and Discharge Integrated Module 3.7V/4.2V Lithium Battery Mobile Power Plate Charge and Discharge Protection (6 PCS)
Asin: B0B9R7LBGB | Ean: 0762917156019 | UPC: 762917156019
⭐Discharge Management: In Discharge Mode (The Key Function Is Invalid In Charging Mode), The Key Port Is Triggered Once To Enable Output. To Turn Off The Output, You Need To Fire The Key Port Twice In Succession..
⭐Product Application: Vehicle Charging Transformation, Dashcam Power Supply, Mobile Power Supply, Portable Devices, Such As Mobile Phones And Tablet Computers.
⭐Battery Protection: The Module Has The Lithium Battery Protection Function (Applicable To Unprotected Lithium Batteries With Protection Plates), Providing Overcurrent, Overvoltage, Short Circuit, And Overtemperature Protection..
⭐Charge Management: Automatically Activates The Output Mode When The Load Is Connected For The First Time. If The Load Is Less Than 50Ma, The Output Will Automatically Shut Down After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Is Automatically Turned On..
Features
- Product name: Charge and discharge integrated module; Charging voltage: DC 4.5V-5.5V
- Charge management: Automatically activates the output mode when the load is connected for the first time. If the load is less than 50MA, the output will automatically shut down after 30 seconds; If the load is greater than 50MA, the output is automatically turned on.
- Discharge management: In discharge mode (the KEY function is invalid in charging mode), the KEY port is triggered once to enable output. To turn off the output, you need to fire the KEY port twice in succession.
- Battery protection: The module has the lithium battery protection function (applicable to unprotected lithium batteries with protection plates), providing overcurrent, overvoltage, short circuit, and overtemperature protection.
- Product application: Vehicle charging transformation, dashcam power supply, mobile power supply, portable devices, such as mobile phones and tablet computers
- See more on Amazon...
Brand: HUAREW | Manufacturer: HUAREW
Warranty: NO
See On Amazon #6
1pcs/lot 2A 5V Charge Discharge Integrated 3 7V 4 2V Lithium Battery Boost Mobile Power Protection DIY Electronic PCB Board Module
Asin: B0BZWPSP67
Features
- 1pcs/lot 2A 5V Charge Discharge Integrated 3 7V 4 2V Lithium Battery Boost Mobile Power Protection Diy Electronic PCB Board Module
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #7
18650 Battery Charger, Suitable for Lithium Battery 18650 20700 10440 14500 18500 16340 17500 Battery Charger, USB Single Slot li-ion Rechargeable Battery Charger (Battery not Included)
Asin: B0BFCKX5FL | Ean: 0705888914066 | UPC: 705888914066
【Safe Charger】 This 18650 Battery Charger Was Featured Overcharge And Over Discharge Protection, Short Circuit Protection, Intelligent Temperature Control Protection And Battery Reverse Polarity Protection. We Adopted Safe And Fire Prevention Pc+Abs Material Battery Charger, With Heat-Resisting, Low Temperature Resistance And Scratch Resistance.
【Micro-Usb Compatible】Compatible With Multiple Usb Inputs, Especially When You Don’T Have Enough Outlet, You Can Even Simply Plug Into Car Charger, Power Bank, Laptop. Wide Range Of Use, More Convenient For Daily Use.
【Charging Indicator】When The Indicator Is Red, It Means Charging; When It's Green, It Means Full Charged; Make Sure You Put The Battery In Position And It Contacts With Charger. This Charger Will Protect Your Battery When It's Full Charged No Matter How Long You Will Leave The Battery In The Charger.
【Powerful Charger】When Reaches A Single Slot Maximum Charging Current Of 600Ma When Using 3.7 Volt Battery Charger.
Features
- UNIVERSAL BATTERY CHARGER The Battery Charger can charge simultaneously rechargeable batteries of different specifications. Suitable for 3.7V lithium ion battery -- 10440, 14500, 16340, 17335, 17500, 17650, 18350, 18500, 18650, 18700, 25500. Not for Ni-MH Ni-Cd AA AAA AAAA C Batteries
- POWERFUL CHARGER When reaches a single slot maximum charging current of 600mA when using 3.7 volt battery charger
- SAFE CHARGER This 18650 battery charger was featured overcharge and over discharge protection, short circuit protection, intelligent temperature control protection and battery reverse polarity protection. We adopted safe and fire prevention PC+ABS material Battery Charger, with heat-resisting, low temperature resistance and scratch resistance
- CHARGING INDICATOR When the indicator is RED, it means charging; when it's GREEN, it means full charged; make sure you put the battery in position and it contacts with charger. This charger will protect your battery when it's full charged no matter how long you will leave the battery in the charger
- MICRO-USB COMPATIBLE Compatible with multiple USB inputs, especially when you don t have enough outlet, you can even simply plug into car charger, power bank, laptop. wide range of use, more convenient for daily use
- See more on Amazon...
Brand: WANGDAJIEDIAN | Manufacturer: WANGDAJIEDIAN
Dimensions: 1.22 x 4.17 x 1.41 inches | Weight: 0.09 Pounds
Warranty: 1 year
See On Amazon #8
AEDIKO 10pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board
Asin: B09JZFXD1X | Ean: 0701715485921 | UPC: 701715485921
Protection Functions: 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection.
Application:2A 5V Module Widely Used For Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply And Portable Devices Such As Mobile Phones And Tablets.
Note:The First Time The Load Is Connected, Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30S; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On.
Mcu Users: If You Accept A Small Load Key Can Be Connected To The Microcontroller About 20S To Provide A Low Level Allows The Module To Continue Working. Trigger Mode: Low Level Trigger (Ground).
Features
- 2A 5V Lithium Battery Charging Protection Module:Output Voltage: 5V; Charging Current: 0-2.1A;Charging Voltage: DC 4.5V-5.5V (DC 5V Recommended)
- MCU Users: if You Accept a Small Load KEY Can be Connected to the Microcontroller about 20s to Provide a Low Level Allows the Module to Continue Working. Trigger Mode: Low Level Trigger (Ground)
- Protection Functions: 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection
- NOTE:The First Time the Load is Connected, Output is Automatically Turned On. If the Load is Less than 50MA, the Output will be Automatically Turned Off after 30s; if the Load is Greater than 50MA, the Output Will be Automatically Turned On
- Application:2A 5V Module Widely Used for Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply and Portable Devices Such As Mobile Phones and Tablets
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
See On Amazon #9
LIR2032 Rechargeable Battery with Charger 8 Slots Charging 3.6V 2032 Button Cell 6 Packs Replace CR2032 ML2032 for Car Key Fob, Air Tag, Watch
Asin: B0CQJZ895B | Model: cr2032 | PartNumber: cr2032 | Ean: 0756588955323 | UPC: 756588955323
👍Lir2032 Vs Cr2032 Batteries: Ctyoung Provide You A High Leak Proof With No Memory Effect On This Round Coin Batteries. No Mercury, No Cadmium, Low Self-Discharge Rate Less Than 7% Per Month, 12 Month Free Replacement. 6 Packs Best Choice 500 Cycle Charging Times To Save Your Money To Buy Bulky Cr2032 At Home..
✔️What You Get From This Packaging: 1Pc Of New Coin Battery Charger 8 Slots, 6Pcs Of Lir2032 Batteries, 1Pc Of Type C Cable, 1Pc Of Instruction Sheet..
👍Widely Using In Most Of Device Like Fob Key Batteries, Airtag Battery, Tile Battery, Car Remote Batteries,Watches, Calculators,Weight Scale,Door Chimes,Pet Collars,Pedometers,Garage Door Openers, Games,Calorie Counters..
✔️20/40/70Ma Fast Charging: Different Capacity Of Coin Cell Match Different Charging Current From The Charger. You Can Select Lir2032 And Lir2450 Batteries To Charge At 40Ma And 70Ma Ports With Fast Charging Option. All Of The Coin Batteries Can Be Full Charging Within 120Mins..
Features
- Smart Coin cell Battery Charger: Universal Charging Rechargeable coin cells including LIR2032/2032H/2450/2025/2016/1632 and more. It support 8pcs of Rechargeable button Batteries Charging at the same time.
- 20/40/70mA Fast Charging: Different Capacity of coin cell match different charging current from the charger. You can select LIR2032 and LIR2450 batteries to charge at 40mA and 70mA ports with fast charging option. All of the coin batteries can be full charging within 120mins.
- LIR2032 VS CR2032 batteries: CTYOUNG provide you a High leak proof with No memory effect on this round coin batteries. No Mercury, No cadmium, Low self-discharge rate less than 7% per month, 12 month free replacement. 6 Packs best choice 500 cycle charging times to save your money to buy bulky CR2032 at home.
- Widely using in most of device like Fob key batteries, airtag battery, tile battery, car remote batteries,watches, calculators,weight scale,door chimes,pet collars,pedometers,garage door openers, games,calorie counters.
- What you get from this packaging: 1pc of New Coin Battery Charger 8 Slots, 6pcs of LIR2032 batteries, 1pc of Type C cable, 1pc of instruction sheet.
- See more on Amazon...
Brand: CTYOUNG | Manufacturer: CTYOUG
Warranty: 12 months
See On Amazon #10
5pcs 5V 1.2A Charging Discharge Module USB Type-C 18650 Lithium Battery Discharge Charger Board with Protection (Replace TP4056 or TP4057).
Asin: B0CTMJMRKZ | Model: FAST-p022 | PartNumber: FAST-p022 | Ean: 0764470434771 | UPC: 764470434771
With Overshoot And Overdischarge Protection, Overdischarge Protection 2.9 V, Charge Cut-Off Voltage 4.2 V.
Automatically Switch Input And Output, Charge The Battery When The External Voltage Is Input, Otherwise Discharge, The Charging Green Light Flashes, The Green Light Is Always On When Fully Charged, The Light Is Not On When Discharging Without Load Standby, And The Blue Light Is On When Discharging With Load. The Standby Power Consumption Is Approximately 0.8 Ma..
When There Is No External Input Voltage, It Automatically Switches To Output Mode, Supports Small Current Output Of 5V, And Supports Output Of About 450 Ma. If The Output Is 1A, The Voltage Will Be Around 4.9V-4.5V Depending On The Power..
Suitable For All Types Of 3.7 V Lithium Batteries, Including 18650 And Aggregate Batteries.
Features
- 4.5-5.5V power supply, suitable for single lithium battery (parallel connection is not limited), maximum 1.2A, can stabilize 1A current as required.
- Suitable for all types of 3.7 V lithium batteries, including 18650 and aggregate batteries
- With overshoot and overdischarge protection, overdischarge protection 2.9 V, charge cut-off voltage 4.2 V
- When there is no external input voltage, it automatically switches to output mode, supports small current output of 5V, and supports output of about 450 ma. If the output is 1A, the voltage will be around 4.9V-4.5V depending on the power.
- Automatically switch input and output, charge the battery when the external voltage is input, otherwise discharge, the charging green light flashes, the green light is always on when fully charged, the light is not on when discharging without load standby, and the blue light is on when discharging with load. The standby power consumption is approximately 0.8 ma.
- See more on Amazon...
Brand: FASTelectric | Manufacturer: FASTELECTRIC
See On Amazon #11
5PCS 2A 5V Charge Discharge Integrated Module, MELIFE 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board Module Household Power Systems
Asin: B08FFYFPTD | Model: 5586257 | PartNumber: 5586257 | Ean: 0701715436466 | UPC: 701715436466
High Power High Efficiency: Discharge Efficiency Up To 96%. In Discharge Mode (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output. Allow Discharge While Charging. (Attention: At This Time Output Voltage 4.7 / 5V).
Widely Applications: This Module Can Be Applied To Solar Panel Turning To Mobile Phone Charging, Car Charging Retrofit, Driving Recorder Power Supply, Household Power Supply, Intelligent Plugging Transformation, Fast Charging Adapter, Etc..
The First Time The Load Is Connected, The Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On..
Multifunctional And Safe: 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection..
Features
- MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)
- Multifunctional and Safe: 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
- High Power High Efficiency: Discharge efficiency up to 96%. In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output. Allow discharge while charging. (Attention: At this time output voltage 4.7 / 5V)
- The first time the load is connected, the output is automatically turned on. If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on.
- Widely Applications: This module can be applied to solar panel turning to mobile phone charging, car charging retrofit, driving recorder power supply, household power supply, intelligent plugging transformation, fast charging adapter, etc.
- See more on Amazon...
Brand: MELIFE | Manufacturer: MELIFE
See On Amazon #12
HiLetgo 5pcs 5V 2A Charging and Discharging Integrated Charing Module USB A and USB C Type-C Dual Interface Compatible to 4.2V 4.35V Lithium Battery High Precision
Asin: B0CDWT9295 | Model: 3-01-1738 | PartNumber: 3-01-1738
Usb A And Usb C/Type-C Dual Interfaces.
Input Voltage: 5V-5.5V.
Compatible To 4.2V 4.35V Lithium Battery.
Charging And Discharging, Two In One Integrated Module.
Features
- 5V 2A Charging and Discharging Integrated Module
- Charging and Discharging, two in one integrated module
- USB A and USB C/Type-C Dual Interfaces
- Compatible to 4.2V 4.35V Lithium Battery
- Input voltage: 5V-5.5V
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #13
Fireproof Battery Organizer Storage Box Fireproof Waterproof Explosionproof Safe Carrying Case Bag Hard Holder ABS Waterproof 12V for 6pcs 18650 Lithium Batteries USB DC Two Ports with Cable for Outdo
Asin: B0C4DNZ3M5 | Model: Milltripis9fdtwgze5274 | PartNumber: Milltripis9fdtwgze5274
Input Voltage: The Input Voltage Of 18650 Waterproof Battery Box Is 12V, Usb Output Voltage Is 5V, Current Is 2A, Can Charge The Mobile Phone..
Multi-Purpose Design: This Battery Box Is Perfect For Use In Your Garage, Workshop, Or Home. The Thick And Soft Padding Inside The Box Fully Protects Your Batteries And Effectively Prevents Micro-Corrosion..
Xp67 Waterproof: The Abs Battery Case Box Cover Is Xp65 Waterproof, No Welding, Reduces The Internal Resistance Of Batteries, Improves The Discharge Performance Of The Battery And Its Life..
Convenient: The Waterproof Battery Case Box Cover Is Convenient To Use, You Can Put 6 18650 Lithium Batteries At The Same Time. The 18650 Battery Case Box Cover Is Equipped With Power Display Function, Convenient For You To Read The Remaining Battery..
Features
- Premium Material: Made of premium ABS, the battery case box is sturdy, durable, reliable, practical and has a long service life.
- Convenient: The waterproof battery case box cover is convenient to use, you can put 6 18650 lithium batteries at the same time. The 18650 battery case box cover is equipped with power display function, convenient for you to read the remaining battery.
- Input Voltage: The input voltage of 18650 waterproof battery box is 12V, USB output voltage is 5V, current is 2A, can charge the mobile phone.
- XP67 Waterproof: The ABS battery case box cover is XP65 waterproof, no welding, reduces the internal resistance of batteries, improves the discharge performance of the battery and its life.
- Multi-Purpose Design: This battery box is perfect for use in your garage, workshop, or home. The thick and soft padding inside the box fully protects your batteries and effectively prevents micro-corrosion.
- See more on Amazon...
Brand: Milltrip | Manufacturer: Milltrip
See On Amazon #14
WSDMAVIS 2 Pcs 5V Charging Board Type-C 2A 2 in 1 Charge Discharge Module 4.2V 18650 Lithium Li-ion Battery Charger Board DIY
Asin: B08R9QTD5S | Model: WS358 | PartNumber: WS358 | Ean: 0779675958991 | UPC: 779675958991
When The Load Current Is Less Than 50Ma Continuously, The Output Will Be Turned Off.When The Charging Current Drops To 100Ma After Reaching The Final Floating Charge Voltage, The Charging Cycle Will Be Automatically Terminated.When The Battery Voltage Drops Below 4.1V, The Charging Cycle Starts Again；When The Battery Voltage Is Lower Than 2.8V, The Battery Will Be Pre Charged At 180Ma..
Note： The Item Is Not Suitable For 3.2V Lifepo4 Batteries.Power Off Is Needed To Adjust The Charging Voltage Setting..
Usb-A Base Welding Position Is Provided On The Back Of The Product, Which Can Be Installed Manually.It Supports Discharging While Charging.Support External Key, Connect The Key To K Point And Output Negative Pole, Short Press To Turn On Power Display And 5V Output.Continuous Two Short Presses Will Turn Off The Power Display And Turn Off The 5V Output..
Input Voltage Range: 5 ~ 5.5V；Charging Cut-Off Voltage:4.2V± 0.5%；Charging Current: 2.4A ± 5%；Boost Output Voltage: 5V ~ 5.15V (Line Loss Compensation)；Boost Output Voltage Ripple: 100Mv；Boost Output Current: 2A；Boost Conversion Efficiency: 92.5% (3.6V Input, 5V 2A)Output；Battery End Quiescent Current: <30Ua.
Features
- Type-C input.4.20V fit almost all normal 3.7V lithium li-ion battery.If want to charge to 100%, recommend to buy the 4.35V version.
- Input voltage range: 5 ~ 5.5V Charging cut-off voltage:4.2V 0.5% Charging current: 2.4A 5% Boost output voltage: 5V ~ 5.15V (line loss compensation) Boost output voltage ripple: 100mV Boost output current: 2A Boost conversion efficiency: 92.5% (3.6V input, 5V 2A)Output Battery end quiescent current: <30uA
- When the load current is less than 50mA continuously, the output will be turned off.When the charging current drops to 100mA after reaching the final floating charge voltage, the charging cycle will be automatically terminated.When the battery voltage drops below 4.1V, the charging cycle starts again When the battery voltage is lower than 2.8V, the battery will be pre charged at 180mA.
- Usb-a base welding position is provided on the back of the product, which can be installed manually.It supports discharging while charging.Support external key, connect the key to K point and output negative pole, short press to turn on power display and 5V output.Continuous Two short presses will turn off the power display and turn off the 5V output.
- Note the item is not suitable for 3.2V LifePo4 batteries.Power off is needed to adjust the charging voltage setting.
- See more on Amazon...
Brand: WSDMAVIS | Manufacturer: WSDMAVIS
See On Amazon #15
HiLetgo 2pcs 3 USB Output 5V 1A 2A Mobile Power Bank Charging Module 18650 Lithium Battery Charger Board LED Indicator 3V 3.7V 4.2V to5V
Asin: B082W73J1N | Model: 3-01-1615 | PartNumber: 3-01-1615
3 Usb Output, Automatically Recognize The Output 5V 1A Or 2A On The Phone..
Can Be Connected To A Lithium Battery, And Can Also Be Connected In Multiple Sections Of Lithium..
You Can Charge 3 Mobile Phone At The Same Time..
18650 Lithium Battery Charger Board With Led Indicator.
Features
- Mobile Power Bank USB Charging Module Output 5V 1A 2A
- 18650 Lithium Battery Charger Board with LED Indicator
- 3 USB output, automatically recognize the output 5V 1A or 2A on the phone.
- You can charge 3 mobile phone at the same time.
- Can be connected to a lithium battery, and can also be connected in multiple sections of lithium.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #16
DAOKI 5PCS 5V 2A Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Supply Charge and Discharge Protection PCB Board Module with USB Female Cable
Asin: B08M37WBL8 | Model: DR-US-369 | PartNumber: DR-US-369
Note:The First Time The Load Is Connected, The Output Is Automatically Turned On. If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On; Allow Discharge While Charging. (Note: At This Time Output Voltage 4.7 / 5V).
Package Content:5 X 2A 5V Charge Discharge Integrated Module, 1 X Usb Female Cable.
Widely Use For Solar Panel Turning To Mobile Phone Charging, Car Charging Retrofit, Driving Recorder Power Supply, Household Power Supply, Intelligent Plugging Transformation, Fast Charging Adapter, Etc..
The Module Protection Function: Over-Current Protection (Ocp); Overvoltage Protection (Ovp); Short Circuit Protection (Scp); Over-Temperature Protection (Otp).
Features
- Charging voltage: DC 4.5V-5.5V (DC 5V recommended); Charging current : 0-2.1A; Charging quiescent current: 100uA; Full voltage: 4.2V+-1%; Discharge current: 0-2.4A; Discharge quiescent current: 50uA; Discharge efficiency: up to 96%; Output voltage: 5V; Output current: 0-2.4A;
- The module protection function: Over-current protection (OCP); Overvoltage protection (OVP); Short Circuit Protection (SCP); Over-temperature protection (OTP)
- Note:The first time the load is connected, the output is automatically turned on. If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on; Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)
- Widely use for solar panel turning to mobile phone charging, car charging retrofit, driving recorder power supply, household power supply, intelligent plugging transformation, fast charging adapter, etc.
- Package Content:5 x 2A 5V Charge Discharge Integrated Module, 1 x USB Female Cable
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.22 Pounds
See On Amazon #17
DAOKAI Charge Discharge Integrated Module 2A 5V Battery Charging Board 3.7V 4.2V with Protection for On-Board Charging Retrofit DIY PCB Board(8Pcs)
Asin: B0C139Q2TP | Model: WE-DA-244 | PartNumber: WE-DA-244
⚡[Product Application] Widely Use For Solar Panel Turning To Mobile Phone Charging, Car Charging Retrofit, Driving Recorder Power Supply, Household Power Supply, Intelligent Plugging Transformation, Fast Charging Adapter, Etc..
⚡[Package Includes] You Will Get 8 X 2A 5V Charge Discharge Integrated Module, 2 X Usb Female Cable..
⚡[Tips] If The Load Is Less Than 50Ma, The Output Will Be Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma. The Output Will Be Turned On Continuously..
⚡[Security Protection] The Module Has Over-Current Protection (Ocp), Over-Voltage Protection (Ovp), Over-Temperature Protection (Otp), And Short-Circuit Protection (Scp).It Can Better Protect The Safe Use Of Output Devices..
Features
- [Product parameters] Charging voltage: DC 4.5V-5.5V (DC 5V recommended); Charging current : 0-2.1A; Charging quiescent current: 100uA; Full voltage: 4.2V+-1%; Discharge current: 0-3.5A; Discharge quiescent current: 50uA; Discharge efficiency: up to 96%; Output voltage: 5V; Output current: 0-2.1A;
- [Security Protection] The module has over-current protection (OCP), over-voltage protection (OVP), over-temperature protection (OTP), and short-circuit protection (SCP).It can better protect the safe use of output devices.
- [Product application] Widely use for solar panel turning to mobile phone charging, car charging retrofit, driving recorder power supply, household power supply, intelligent plugging transformation, fast charging adapter, etc.
- [Tips] If the load is less than 50MA, the output will be turned off after 30 seconds; if the load is greater than 50MA. The output will be turned on continuously.
- [Package includes] You will get 8 x 2A 5V Charge Discharge Integrated Module, 2 x USB Female Cable.
- See more on Amazon...
Brand: DAOKAI | Manufacturer: DAOKAI
See On Amazon #18
2A 5V Charge Discharge Integrated Module 4.2V/4.35V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board Module
Asin: B0BLY9LJD4 | Ean: 7500642026978
The Charging Module Supports External Buttons, Connect The Button To The K Point And The Output Negative Pole, Short Press To Turn On The Power Display And Turn On The 5V Output, Two Short Presses In A Row Will Turn Off The Power Display And Turn Off The 5V Output..
If The Charging Current Drops To 100Ma After Reaching The Final Float Voltage, The Charging Cycle Will Be Automatically Terminated..
Usb-A Female Socket Welding Position Is Provided On The Back Of The Product, And The Female Socket Can Be Installed Manually. It Is Suitable For 4.2/4.35V Battery..
It Supports Charging And Discharging, Meet Your Different Requirements..
Features
- The output will be turned off when the load current is continuously less than 50mA.
- It supports charging and discharging, meet your different requirements.
- The charging module supports external buttons, connect the button to the K point and the output negative pole, short press to turn on the power display and turn on the 5V output, two short presses in a row will turn off the power display and turn off the 5V output.
- USB-A female socket welding position is provided on the back of the product, and the female socket can be installed manually. It is suitable for 4.2/4.35V battery.
- If the charging current drops to 100mA after reaching the final float voltage, the charging cycle will be automatically terminated.
- See more on Amazon...
Brand: KUFptva | Manufacturer: KUFptva
Weight: 0.01 Pounds
See On Amazon #19
Charge Discharge Integrated Module PCB Module Board 2A 5V Power Protection Module for Battery Charging Protection 6PCS Modularizer
Asin: B0D3PVBWRP
The Charge Module Will Allow Discharge While Charging That You Can Continue Your Work While Charging. (Note: At This Time Output Voltage 4.7 / 5V).
The Charge Discharge Integrated Module Has Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection.
This Pcb Board Module Is A 4 In 1 Tool: Charging / Discharging / Lithium Battery Protection / Battery Level Indicator.
When Our Power Protection Module In Discharge Mode (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output.
Features
- The first time the load is connected, the output of the this Discharge Module is automatically turned on. If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on
- When our Power Protection Module in discharge mode (the charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output
- The Charge Module will allow discharge while charging that you can continue your work while charging. (Note: At this time output voltage 4.7 / 5V)
- This PCB Board Module is a 4 in 1 tool: charging / discharging / lithium battery protection / battery level indicator
- The Charge Discharge Integrated Module has lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection
- See more on Amazon...
Brand: Pineeseatile | Manufacturer: Pineeseatile
Dimensions: 0.79 x 1.18 x 1.18 inches | Weight: 0.04 Pounds
See On Amazon
Looking For Something Else?
Search