MANNIFEN 8 Inch Single Hook Two Claws Puller Separate Lifting Device
Asin: B07QKZCGTZ | Ean: 0741722391655 | UPC: 741722391655
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Can Be Used For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel, Car Wheel, Machine Wheel, Etc.
Specification:Pulling Diameter: 140Mm,Screw Length: 165Mm,Bracket Length: 195Mm,Screw Diameter (Top): 15Mm,Screw Diameter (Bottom): 13Mm,Claw Length: 142Mm,Claw Thickness: 3-5Mm..
Ultra-Thin Claw, Ultra-High Strength, With Elastic Metal Resistance, Not Easy To Pull Bad, Easy Installation..
The Tip Of The Ejector Pin Is A Heat-Treated Rotating Head That Does Not Injure Other Parts And Is Durable And Labor-Saving..
Features
- The product is forged from chrome vanadium steel, durable, rust-proof and non-slip.
- The tip of the ejector pin is a heat-treated rotating head that does not injure other parts and is durable and labor-saving.
- Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc
- Ultra-thin Claw, ultra-high strength, with elastic metal resistance, not easy to pull bad, easy installation.
- specification:Pulling Diameter: 140mm,Screw Length: 165mm,Bracket Length: 195mm,Screw Diameter (top): 15mm,Screw Diameter (bottom): 13mm,Claw Length: 142mm,Claw Thickness: 3-5mm.
- See more on Amazon...
Brand: MANNIFEN | Manufacturer: TAO+
See On Amazon Similar To MANNIFEN 8 Inch Single Hook
#1
MANNIFEN CR-V Single Hook Two Claws Puller Separate Lifting Device.TAO+ Stores Offer 4 Different Sizes of jaw Puller for You to Choose to Deal with
Asin: B07QKJHC61 | Model: SB-12222 | PartNumber: SB-12222 | Ean: 0741722391648 | UPC: 741722391648
Specification - The Screw Length Of The Two Jaws Puller Is 6.5 Inches/165Mm,Bracket Length:6 Inches/ 150Mm(The Top End Of The Bracket 2 Has Anti-Dropout Pins, And The 2-Jaw Gear Puller Actually Uses A Gear Maximum Of 5.3 Inches),Screw Diameter (Top): 14Mm,Screw Diameter (Bottom): 14Mm,Total Length Of Claw:5.6Inches/140Mm(The Actual Length Used After Installing The Bracket On The Claw Is 3.8 Inches/97Mm),Claw Thickness:5Mm, For More Size Description Please See Size Picture And Video..
High Quality After-Sales Service - Customers’ Feedback Always Matters. The Goal Of Our Mannifen Brand Is To Make You Satisfied With Buying. If You’Re Not 100% Content With Our 6 Inch Two Claws Gear Puller, Please Feel Free To Contact Us. We'll Try Our Best To Provide You With A Satisfactory Solution..
Wide Application - The Two Jaws Bearing Remover Is Widely Used In Various Bearings That Are Not Easy To Disassemble. 2-Jaw Separator Tool For Removal Of Stuck Or Small Tolerance Pulleys, Gears, Bearings And More Without Damage Them..
Convenient Adjustment - The 2 Jaw Gear Puller Can Adjust The Clamping Depth And Working Space,Suitable For Most Different Sizes Of Gears And Bearings.,Design Makes It Easy To Grasp The Gears And Bearings And Pull Them Out..
Features
- High quality material - The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness . Heat treatment process makes it more good.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- Convenient Adjustment - The 2 jaw gear puller can adjust the clamping depth and working space,Suitable for most different sizes of gears and bearings.,design makes it easy to grasp the gears and bearings and pull them out.
- Specification - The screw length of the two jaws puller is 6.5 inches/165mm,Bracket Length:6 inches/ 150mm The top end of the bracket 2 has anti-dropout pins, and the 2-Jaw Gear Puller actually uses a gear maximum of 5.3 inches ,Screw Diameter (top): 14mm,Screw Diameter (bottom): 14mm,Total length of claw:5.6inches/140mm The actual length used after installing the bracket on the claw is 3.8 inches/97mm ,Claw Thickness:5mm, For more size description please see size picture and video.
- Wide application - The two jaws bearing remover is widely used in various bearings that are not easy to disassemble. 2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.
- High quality after-sales service - Customers feedback always matters. The goal of our MANNIFEN brand is to make you satisfied with buying. If you re not 100% content with our 6 inch two claws gear puller, please feel free to contact us. We'll try our best to provide you with a satisfactory solution.
- See more on Amazon...
Brand: MANNIFEN | Manufacturer: TAO+
Dimensions: 0.11 x 6.25 x 2.16 inches | Weight: 0.10 Pounds
See On Amazon #2
MANNIFEN M10 Ceiling Hook Pad Eye Plate 304 Stainless Steel Wall Mount Hook Heavy Duty for Hanging (Pack of 2)
Asin: B0BLH8C7G4 | Model: M1080001 | PartNumber: M1080001 | Ean: 0787996293462 | UPC: 787996293462
Ceiling Hook Surface: Wire Drawing Surface,Comfortable Hand Feel..
Size:M10 ,Quantity:2.
Ceiling Hook Detailed Size Information Are Shown In The Picture..
Material:304 Stainless Steel. Work Well In Damp Room And Outdoor Environment..
Features
- Resistance band wall anchor application: Wide application. Suitable for yoga rope hanging,boat rigging,ceiling fan,boxing sandbag hanging,hammock hanging,punching bag hanger
- Material:304 Stainless Steel. Work well in damp room and outdoor environment.
- Ceiling hook surface: Wire drawing surface,comfortable hand feel.
- Ceiling hook detailed size information are shown in the picture.
- Size:M10 ,Quantity:2
- See more on Amazon...
Brand: MANNIFEN | Manufacturer: sleeping bag
Dimensions: 1.18 x 2.36 x 1.96 Inches
See On Amazon #3
MANNIFEN CR-V Single Hook Two Claws Puller Separate Lifting Device(6")+2-Jaw Gear Puller for Removal of Pulley Flywheel Bearing(10")
Asin: B0CDRZ2RHF
Specification - The Screw Length Of The Two Jaws Puller Is 6.5 Inches/165Mm,Bracket Length:6 Inches/ 150Mm(Tthe Top End Of The Bracket 2 Has Anti-Dropout Pins, And The 2-Jaw Gear Puller Actually Uses A Gear Maximum Of 5.3 Inches),Screw Diameter (Top): 14Mm,Screw Diameter (Bottom): 14Mm,Total Length Of Claw:5.6Inches/140Mm(The Actual Length Used After Installing The Bracket On The Claw Is 3.8 Inches/97Mm),Claw Thickness:5Mm, For More Size Description Please See Size Picture And Video..
Wide Application - The Two Jaws Bearing Remover Is Widely Used In Various Bearings That Are Not Easy To Disassemble. Perfectly Suitable For Car Flywheels, Motorcycle Wheels, Car Wheels, Scooter Motorcycle Bearings And Gears, Etc..
Mark 10"-250Mm(2 Jaw Gear Puller 10 Inch) Size - The Screw Length Of The Two Jaw Puller Is 9.64Inches/245Mm,Bracket Length:10.43 Inches/ 265Mm(Due To The Anti-Falling Pin, The Actual Bracket Is Only 240Mm/9.44 Inches For Use ),Screw Diameter (Top): 21Mm,Screw Diameter (Bottom): 16Mm,Claw Length:8.18Inches/208Mm(The Actual Length Of The Claw Installed On The Bracket: 146Mm /5.74Inches), For More Size Description Please See Size Picture..
Adjustable Design - The 2 Jaw Gear Puller Can Adjust The Clamping Depth And Working Space, Suitable For Gears And Bearings Of Different Sizes,Design Makes It Easy To Grasp The Gears And Bearings And Pull Them Out..
Features
- High quality material - The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more durable.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- Adjustable Design - The 2 jaw gear puller can adjust the clamping depth and working space, suitable for gears and bearings of different sizes,design makes it easy to grasp the gears and bearings and pull them out.
- Specification - The screw length of the two jaws puller is 6.5 inches/165mm,Bracket Length:6 inches/ 150mm TThe top end of the bracket 2 has anti-dropout pins, and the 2-Jaw Gear Puller actually uses a gear maximum of 5.3 inches ,Screw Diameter (top): 14mm,Screw Diameter (bottom): 14mm,Total length of claw:5.6inches/140mm The actual length used after installing the bracket on the claw is 3.8 inches/97mm ,Claw Thickness:5mm, For more size description please see size picture and video.
- Mark 10-250mm 2 jaw gear puller 10 inch size - The screw length of the two jaw puller is 9.64inches/245mm,Bracket Length:10.43 inches/ 265mm Due to the anti-falling pin, the actual bracket is only 240mm/9.44 inches for use ,Screw Diameter (top): 21mm,Screw Diameter (bottom): 16mm,Claw Length:8.18inches/208mm(The actual length of the claw installed on the bracket: 146mm /5.74inches), For more size description please see size picture.
- Wide application - The two jaws bearing remover is widely used in various bearings that are not easy to disassemble. Perfectly suitable for car flywheels, motorcycle wheels, car wheels, scooter motorcycle bearings and gears, etc.
- See more on Amazon...
Brand: MANNIFEN
See On Amazon #4
MANNIFEN CR-V Single Hook Two Claws Puller Separate Lifting Device(6")+2 Claw Gears Puller for Removal of Pulley Flywheel Bearing(4")
Asin: B0CDRWYTS1
Specification - The Screw Length Of The Two Jaws Puller Is 6.5 Inches/165Mm,Bracket Length:6 Inches/ 150Mm(Tthe Top End Of The Bracket 2 Has Anti-Dropout Pins, And The 2-Jaw Gear Puller Actually Uses A Gear Maximum Of 5.3 Inches),Screw Diameter (Top): 14Mm,Screw Diameter (Bottom): 14Mm,Total Length Of Claw:5.6Inches/140Mm(The Actual Length Used After Installing The Bracket On The Claw Is 3.8 Inches/97Mm),Claw Thickness:5Mm, For More Size Description Please See Size Picture And Video..
Wide Application - The Two Jaws Bearing Remover Is Widely Used In Various Bearings That Are Not Easy To Disassemble. Perfectly Suitable For Car Flywheels, Motorcycle Wheels, Car Wheels, Scooter Motorcycle Bearings And Gears, Etc..
Mark 4"-100Mm Size - The Screw Length Of The Two Jaws Puller Is 4.52Inches/115Mm,Bracket Length:4 Inches/ 100Mm(Due To The Anti-Falling Pin, The Actual Bracket Is Only 90Mm/3.54 Inches For Use ),Screw Diameter (Top): 12Mm,Screw Diameter (Bottom): 10Mm,Claw Length:4Inches/100Mm(The Actual Length Of The Claw Installed On The Bracket: 67Mm /2.63"), For More Size Description Please See Size Picture..
Adjustable Design - The 2 Jaw Gear Puller Can Adjust The Clamping Depth And Working Space, Suitable For Gears And Bearings Of Different Sizes,Design Makes It Easy To Grasp The Gears And Bearings And Pull Them Out..
Features
- High quality material - The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more durable.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- Adjustable Design - The 2 jaw gear puller can adjust the clamping depth and working space, suitable for gears and bearings of different sizes,design makes it easy to grasp the gears and bearings and pull them out.
- Specification - The screw length of the two jaws puller is 6.5 inches/165mm,Bracket Length:6 inches/ 150mm TThe top end of the bracket 2 has anti-dropout pins, and the 2-Jaw Gear Puller actually uses a gear maximum of 5.3 inches ,Screw Diameter (top): 14mm,Screw Diameter (bottom): 14mm,Total length of claw:5.6inches/140mm The actual length used after installing the bracket on the claw is 3.8 inches/97mm ,Claw Thickness:5mm, For more size description please see size picture and video.
- Mark 4-100mm size - The screw length of the two jaws puller is 4.52inches/115mm,Bracket Length:4 inches/ 100mm Due to the anti-falling pin, the actual bracket is only 90mm/3.54 inches for use ,Screw Diameter (top): 12mm,Screw Diameter (bottom): 10mm,Claw Length:4inches/100mm(The actual length of the claw installed on the bracket: 67mm /2.63), For more size description please see size picture.
- Wide application - The two jaws bearing remover is widely used in various bearings that are not easy to disassemble. Perfectly suitable for car flywheels, motorcycle wheels, car wheels, scooter motorcycle bearings and gears, etc.
- See more on Amazon...
Brand: MANNIFEN
See On Amazon #5
MANNIFEN CR-V Single Hook Two Claws Puller Separate Lifting Device(6")+2-Jaw Gear Puller,Adjustable - Bearing Gears Puller,2 Claw Gears Puller for Removal of Pulley Flywheel Bearing (8")
Asin: B0CDVX23QM
Specification - The Screw Length Of The Two Jaws Puller Is 6.5 Inches/165Mm,Bracket Length:6 Inches/ 150Mm(Tthe Top End Of The Bracket 2 Has Anti-Dropout Pins, And The 2-Jaw Gear Puller Actually Uses A Gear Maximum Of 5.3 Inches),Screw Diameter (Top): 14Mm,Screw Diameter (Bottom): 14Mm,Total Length Of Claw:5.6Inches/140Mm(The Actual Length Used After Installing The Bracket On The Claw Is 3.8 Inches/97Mm),Claw Thickness:5Mm, For More Size Description Please See Size Picture And Video..
Wide Application - The Two Jaws Bearing Remover Is Widely Used In Various Bearings That Are Not Easy To Disassemble. Perfectly Suitable For Car Flywheels, Motorcycle Wheels, Car Wheels, Scooter Motorcycle Bearings And Gears, Etc..
Mark 8"-200Mm Size - The Screw Length Of The Two Jaws Puller Is 6.41Inches/163Mm,Bracket Length:7.87 Inches/ 200Mm(Due To The Anti-Falling Pin, The Actual Bracket Is Only 173Mm/6.8 Inches For Use ),Screw Diameter (Top): 14Mm,Screw Diameter (Bottom): 14Mm,Claw Length:6.14Inches/156Mm, For More Size Description Please See Size Picture.
Adjustable Design - The 2 Jaw Gear Puller Can Adjust The Clamping Depth And Working Space, Suitable For Gears And Bearings Of Different Sizes,Design Makes It Easy To Grasp The Gears And Bearings And Pull Them Out..
Features
- High quality material - The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more durable.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- Adjustable Design - The 2 jaw gear puller can adjust the clamping depth and working space, suitable for gears and bearings of different sizes,design makes it easy to grasp the gears and bearings and pull them out.
- Specification - The screw length of the two jaws puller is 6.5 inches/165mm,Bracket Length:6 inches/ 150mm TThe top end of the bracket 2 has anti-dropout pins, and the 2-Jaw Gear Puller actually uses a gear maximum of 5.3 inches ,Screw Diameter (top): 14mm,Screw Diameter (bottom): 14mm,Total length of claw:5.6inches/140mm The actual length used after installing the bracket on the claw is 3.8 inches/97mm ,Claw Thickness:5mm, For more size description please see size picture and video.
- Mark 8-200mm size - The screw length of the two jaws puller is 6.41inches/163mm,Bracket Length:7.87 inches/ 200mm Due to the anti-falling pin, the actual bracket is only 173mm/6.8 inches for use ,Screw Diameter (top): 14mm,Screw Diameter (bottom): 14mm,Claw Length:6.14inches/156mm, For more size description please see size picture
- Wide application - The two jaws bearing remover is widely used in various bearings that are not easy to disassemble. Perfectly suitable for car flywheels, motorcycle wheels, car wheels, scooter motorcycle bearings and gears, etc.
- See more on Amazon...
Brand: MANNIFEN
See On Amazon
Looking For Something Else?
Search