Golf Cart Brake Drum/Hub Assembly (Electric) for EZGO TXT Golf Carts Replace# 19186G1
Asin: B07QL52R8J | Ean: 0786705024922 | UPC: 786705024922
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.It Has A 3/4-Inch Center Hole With A 24-Tooth Star Spline, The Hub Is Held In Place By A Castellated Nut (5/8-Inch X 18Tpi) And A Thick (118-Inch) Flat Washer. See Szie Details As Image..
If There Is A Problem With Item, You Will Get Replacement Or Refund. You Will Have Best Ever Experience With Us..
Easy To Disassemble. Ezgo Txt Drum Is For The Brake Drum Only. When Replacing This Brake Drum, Check The Hub Assembly As Well. This Brake Hub/Drum Is A Replacement For The Earlier Hub & Drum And Has The Star Spline Instead Of The Straight Key..
This Hub/Drum Is A Replacement For The Earlier (Before 1982) Hub & Drum Andhas The Star Spline Instead Of The Straight Key.
Features
- Used on 1982-current E-Z-GO Electric Vehicles and 1982-1993 2-Cycle Gas Vehicles.
- This hub/drum is a replacement for the earlier (before 1982) hub & drum andhas the star spline instead of the straight key
- It has a 3/4-Inch center hole with a 24-tooth star spline, the hub is held in place by a castellated nut (5/8-Inch x 18tpi) and a thick (118-Inch) flat washer. see szie details as image.
- Easy to disassemble. ezgo txt drum is for the brake drum only. When replacing this brake drum, check the Hub assembly as well. This Brake hub/drum is a replacement for the earlier hub & drum and has the star spline instead of the straight key.
- If there is a problem with item, you will get replacement or refund. You will have best ever experience with us.
- See more on Amazon...
Brand: BeAcc | Manufacturer: BST
See On Amazon Similar To Golf Cart Brake Drum Hub
#1
10L0L Golf Cart Brake Drum/Hub Assembly (Electric) for EZGO TXT Replaces OEM# 19186G1P
Asin: B08CR8SRN9 | Model: 19186G1P | PartNumber: 19186G1P
Has A 3/4-Inch Center Hole With A 24-Tooth Star Spline.
The Drum Is Held In Place By A Castellated Nut (5/8-Inch X 18Tpi) And A Thick (.118-Inch) Flat Washer..
This Hub/Drum Will Not Operate With A Keyed Axle/Hub Interface..
This Hub/Drum Is A Replacement For The Earlier Hub & Drum And Has The Star Spline Instead Of The Straight Key..
Features
- Used on 1982-current E-Z-GO Electric Vehicles. Warm tips: Hub spline and Rear Axle Shaft Spline should be matched tight. When one of them is wear out, both of them should be replaced at the same time. Other wise the hub spline will strip soon.
- This hub/drum is a replacement for the earlier hub & drum and has the star spline instead of the straight key.
- Has a 3/4-Inch center hole with a 24-tooth star spline
- This hub/drum will NOT operate with a keyed axle/hub interface.
- The drum is held in place by a castellated nut (5/8-Inch x 18tpi) and a thick (.118-Inch) flat washer.
- See more on Amazon...
Brand: 10L0L | Manufacturer: 10L0L
See On Amazon #2
9.99WORLD MALL Golf Cart Brake Drum Hub Assembly for EZGO TXT PDS 1982-up Electric & 1982-1993 2-Cycle Gas, Replace OEM# 19186G1P
Asin: B073TQGR9F | Model: . | PartNumber: . | Ean: 0688209763409 | UPC: 688209763409
There Is A 3/4-Inch Center Hole With A 24-Tooth Star Spline The Hub Is Held In Place By A Castellated Nut (5/8-Inch X 18Tpi) And A Thick (118-Inch) Flat Washer..
The Drum Is Held In Place By A Castellated Nut And A Thick Flat Washer. This Hub/Drum Will Not Operate With A Keyed Axle/Hub Interface.Warm Tips: Hub Spline And Rear Axle Shaft Spline Should Be Matched Tight. When One Of Them Is Wear Out, Both Of Them Should Be Replaced At The Same Time. Other Wise The Hub Spline Will Strip Soon..
This Brake Hub/Drum Is A Replacement For The Earlier Hub & Drum And Has The Star Spline Instead Of The Straight Key.And This Is For The Brake Drum Only. When Replacing This Brake Drum, Check The Hub Assembly As Well..
This Brake Drum/Hub Assembly Replaces Part# 19186G1p.Asy Installation & 1 Year Warranty.We Have Also Kindly Included Detailed Installation Instructions..
Features
- Golf Cart Brake Drum Hub Assembly for EZGO TXT 1982-up Electric Vehicles and 1982-1993 2-Cycle Gas Vehicles.
- This brake drum/hub assembly replaces Part# 19186G1P.asy Installation & 1 year Warranty.We have also kindly included detailed installation instructions.
- There is a 3/4-Inch center hole with a 24-tooth star spline The hub is held in place by a castellated nut (5/8-Inch x 18tpi) and a thick (118-Inch) flat washer.
- This Brake hub/drum is a replacement for the earlier hub & drum and has the star spline instead of the straight key.And this is for the brake drum only. When replacing this brake drum, check the Hub assembly as well.
- The drum is held in place by a castellated nut and a thick flat washer. This hub/drum will NOT operate with a keyed axle/hub interface.Warm tips: Hub spline and Rear Axle Shaft Spline should be matched tight. When one of them is wear out, both of them should be replaced at the same time. Other wise the hub spline will strip soon.
- See more on Amazon...
Brand: 9.99WORLD MALL | Manufacturer: World 9.99 Mall
Dimensions: 3.70 x 7.30 x 7.10 inches | Weight: 6.11 Pounds
See On Amazon #3
BILITOOLS 10" 2-Jaw Gear Puller, Internal External for Removal of Pulleys Flywheels Bearings & Gears
Asin: B0B3119P2Z | Ean: 6974676371341
2 Jaw Gear Puller Can Be Reversed To Pull Parts From Either The Inside Or Outside. The Jaws Allows For Easy Gripping And Access To Tight Spaces..
There Are 5 Different Sizes Of Jaw Puller For You To Choose To Deal With Different Parts (Small, Medium And Large): 3", 4", 6", 8", 10".
The Button Makes It Easily To Change The Puller Into Internal Or External Gear Puller..
This 2 Jaw Gear Puller Is Made With Premium Heat-Treated Cr-V Steel To Ensure No Breakages Or Bend Occur From The High Tension Experienced During Pulling..
Features
- 2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.
- This 2 jaw gear puller is made with premium heat-treated CR-V steel to ensure no breakages or bend occur from the high tension experienced during pulling.
- 2 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.
- The button makes it easily to change the puller into internal or external gear puller.
- There are 5 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 3, 4, 6, 8, 10
- See more on Amazon...
Brand: BILITOOLS | Manufacturer: BILITOOLS
Dimensions: 3.94 x 12.60 x 2.36 Inches | Weight: 5.72 Pounds
See On Amazon #4
LIBRA Trailer Hub Drum Kits 8 on 6.5" B.C. w/ 12"x2" Self-Adjusting Electric Brakes for 7000 Lbs Axle
Asin: B0B36KXVWD
Also Include: One Right + One Left 12" X 2" Self-Adjusting Electric Brakes With 3-1/4" Center Hole, Works On Dexter And Other Brands 7000Lbs Axle In The Market.
Ref Drum Part #. 008-219; Ref Brake Part #. K23-180-00, K23-181-00.
Kit Also Include: 2X 25580 Inner Cone Bearings And 2X 14125A Outer Cone Bearings, 2X Grease Seal 2.25" X 3.371" Seals, 2X Ez Lube Grease Caps With Rubber Plug, 16 Cone Wheel Nuts, 1/2" - 20 Thread.
Features
- 2x Trailer 8 on 6.5" B.C hub drum kits + 2x 12"x2" Self-Adjusting electric brakes for 7000 Lbs Axle, Bolt pattern: 8 on 6.5";
- Kit also include: 2x 25580 inner cone bearings and 2x 14125A outer cone bearings, 2x Grease seal 2.25 x 3.371 seals, 2x EZ lube grease caps with rubber plug, 16 cone wheel nuts, 1/2 - 20 thread
- Also include: One right + one left 12 x 2 Self-Adjusting electric brakes with 3-1/4 center hole, Works on Dexter and other brands 7000lbs axle in the market
- Ref drum part #. 008-219; ref brake part #. K23-180-00, K23-181-00
- See more on Amazon...
Brand: LIBRA | Manufacturer: Libra
Weight: 100.00 Pounds
See On Amazon #5
10L0L Golf Cart Rear Brake Drums for Club Car DS 1995-up,Club Car Precedent 2004-up Gas&Electric,OEM# 1017911-01,1018232-01(2 Packs)
Asin: B08CX7HT2Z
Factory Oem Replacement,Perfect Fit ,Money Value;.
10L0l Is A Professional Golf Cart Accessories Brand Having Been Concentrating On Golf Cart Accessories Over 15 Years.We Have Abundent Experience And The Best Price Compared With Other Suppliers,Welcome Your Buying With Us!.
Package Include:2X Club Car Ds Precedent Brake Drums;.
Replace Oem Part Numbers:1017911-01 ;.
Features
- 10L0L Rear Brake Drums,fit Club Car Precedent Gas & Electric (2004-up) , DS (1995-up) gas or electric models;
- Replace OEM Part Numbers:1017911-01 ;
- Factory OEM Replacement,Perfect fit ,Money Value;
- Package Include:2X Club Car DS Precedent Brake Drums;
- 10L0L is a professional golf cart accessories brand having been concentrating on golf cart accessories over 15 years.We have abundent experience and the best price compared with other suppliers,welcome your buying with us!
- See more on Amazon...
Brand: 10L0L | Manufacturer: 10L0L
See On Amazon #6
MANNIFEN 2 Jaw Puller, 2 Claw Gears Puller for Removal of Pulley Flywheel Bearing,Small Gear Puller (4inches)
Asin: B0C81B12GL | Model: LM120304 | PartNumber: LM120304
Multi-Purpose Reversible Jaw Puller - The Two Arms Of The Puller Can Be Mounted With The Claws Facing Inside Or Facing Outside, Suit For Internal And External Pulling Of Bearings And Other Components..
The 2 Jaw Bearing Puller Is Made Of Forged Chrome Vanadium Steel Material. It Has High Hardness And Strength. Heat Treatment Process Makes It More Good..
Mark 4"-100Mm Size - The Screw Length Of The Two Jaws Puller Is 4.52Inches/115Mm,Bracket Length:4 Inches/ 100Mm（Due To The Anti-Falling Pin, The Actual Bracket Is Only 90Mm/3.54 Inches For Use ）,Screw Diameter (Top): 12Mm,Screw Diameter (Bottom): 10Mm,Claw Length:4Inches/100Mm(The Actual Length Of The Claw Installed On The Bracket: 67Mm /2.63"), For More Size Description Please See Size Picture..
Small Bearing Puller - Ideal For Removing Miniature Bearings And Other Small Fasteners On Delicate Equipment..
Features
- 2 Jaw Bearing Puller - Perfect for removing small bearings and other fasteners with ease.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- Small Bearing Puller - Ideal for removing miniature bearings and other small fasteners on delicate equipment.
- Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.
- Mark 4-100mm size - The screw length of the two jaws puller is 4.52inches/115mm,Bracket Length:4 inches/ 100mm Due to the anti-falling pin, the actual bracket is only 90mm/3.54 inches for use ,Screw Diameter (top): 12mm,Screw Diameter (bottom): 10mm,Claw Length:4inches/100mm(The actual length of the claw installed on the bracket: 67mm /2.63), For more size description please see size picture.
- The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more good.
- See more on Amazon...
Brand: MANNIFEN | Manufacturer: MANNIFEN
Warranty: NO
See On Amazon #7
Orion Motor Tech Front Wheel Hub Puller Flange Type Tool for 3-3/4 to 4-1/2 Inch IDs, Universal Hub and Axle Puller with M16x1.5 Forcing Bolt and Sleeve, FWD Hub Installer and Remover Tool with Socket
Asin: B0995SKWSP | Model: Y00100 | PartNumber: Y00100
Quick & Easy Operation: These Automotive Tools Work Together To Provide Straight And Even Force So Your Front Hub Pops Out Smoothly, Leaving The Wheel Bearing Inside The Joint And The Rest Of Your Vehicle Untouched.
1 Year Warranty: Order Orion Motor Tech's Front Hub Puller Set With Your Peace Of Mind Assured Thanks To Its Strong 1 Year Warranty And Our Usual Friendly 24/7 Customer Service, Ready To Enjoy Fast, Simple, And Damage-Free Auto Servicing.
Built To Last: Made Of Premium Aisi 1045 Medium Carbon Steel, Our Wheel Hub Removal Set Provides Strong And Dependable Service For The Long Haul; Heat Treated And Blackened Or Chrome Plated, Each Part Offers Superior Durability And Corrosion Resistance For Long-Term Use.
Universal Compatibility: The Front Hub Puller, Compatible With Most Vehicles With Independent Front Wheel Suspension, Firmly Locks Onto Your Axle Assembly, Making Removal Of Stuck Front Hubs A Cinch; The Threading Of Our 5 Pound Forcing Bolt Works With Other M16x1.5 Adapters To Deal With Various Car Models Or To Handle Other Work Around Your Engine.
Features
- PULL FRONT WHEEL HUBS: This wheel hub puller set by Orion Motor Tech includes a universal 3-3/4'' to 4-1/2'' hub puller, a M16x1.5 forcing bolt, a fasten lug nut, and a helpful socket to quickly and easily loosen and remove your front wheel hubs
- UNIVERSAL COMPATIBILITY: The front hub puller, compatible with most vehicles with independent front wheel suspension, firmly locks onto your axle assembly, making removal of stuck front hubs a cinch; the threading of our 5 pound forcing bolt works with other M16x1.5 adapters to deal with various car models or to handle other work around your engine
- QUICK & EASY OPERATION: These automotive tools work together to provide straight and even force so your front hub pops out smoothly, leaving the wheel bearing inside the joint and the rest of your vehicle untouched
- BUILT TO LAST: Made of premium AISI 1045 medium carbon steel, our wheel hub removal set provides strong and dependable service for the long haul; heat treated and blackened or chrome plated, each part offers superior durability and corrosion resistance for long-term use
- 1 YEAR WARRANTY: Order Orion Motor Tech's front hub puller set with your peace of mind assured thanks to its strong 1 year warranty and our usual friendly 24/7 customer service, ready to enjoy fast, simple, and damage-free auto servicing
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 4.00 x 6.00 x 5.00 Inches
Warranty: 1 year warranty
See On Amazon #8
10L0L Golf Cart Brake Repair Kit fit Club Car DS 1995-Up and Precedent 2004-Up,Club Car Brake Drums & Brake Pads & Brake Shoes Spring Kit,OEM# 101791101, 10603, 1018232-01
Asin: B0BJTYRWKJ
【Club Car Brake Shoes】Golf Cart Brake Shoes/Brake Pads Set:2 Short(17T) And 2 Long(17L),Replace Oem # 1018232-01;.
【Package Include】 Installation Manual*1 Pcs, 2X Brake Drums,4X Brake Pads/Shoes,2 Set Brake Shoes Spring Kit,Compete Set For A Whole Cart, One Year Warranty..
【Club Car Brake Spring Kit】Fits Ds & Precedent G&E 1980 Up ,Replace Oem:# 1018163-01,1011466, After Market No: 4324, 4333, 5162, 5219;.
【Club Car Brake Drums】Replace Oem # 1017911-01; This Brake Drum Does Not Have The Center Hole,So It Does Not Fit Older Club Car Golf Carts;.
Features
- Fitment 10L0L golf cart club car brake maintenance kit fit on Club Car DS 1995-Up and Precedent 2004-Up Gas & Electric models;
- Club Car Brake Drums Replace OEM # 1017911-01; this brake drum does NOT have the center hole,so it DOES NOT fit older Club Car golf carts;
- Club Car Brake Shoes Golf Cart brake shoes/brake pads set:2 Short(17T) and 2 Long(17L),Replace OEM # 1018232-01;
- Club Car Brake Spring Kit fits DS & Precedent G&E 1980 Up ,Replace OEM:# 1018163-01,1011466, After Market No: 4324, 4333, 5162, 5219;
- Package Include Installation Manual*1 pcs, 2x Brake Drums,4x Brake Pads/Shoes,2 Set Brake Shoes Spring Kit,Compete set for a whole cart, One Year Warranty.
- See more on Amazon...
Brand: 10L0L | Manufacturer: 10L0L
See On Amazon #9
10L0L Golf Cart Brake Cable Set for Club Car Precedent 2004-up and Tempo 2018-up, Driver and Passenger Side, Replace OEM 102557501 102557502 103528701 103528702
Asin: B08SLVHF44
Passenger Side Brake Cable Assembly Measures 49-1/8" Overall X 41" Housing, Driver Side Brake Cable Assembly Measures 37 7/8" Overall X 30 5/8" Housing.
Both Driver & Passenger Side Brake Cable Included, Easy To Install.
Replacing Your Worn Brake Cables Will Allow Your Golf Cart To Perform As Intended.
Replaces Oem Part#: 102557501, 102557502, 103528701, 103528702.
Features
- Golf cart brake cable set fits Club Car Precedent 2004-up and Tempo 2018-up gas & electric vehicles
- Replaces OEM part#: 102557501, 102557502, 103528701, 103528702
- Passenger side brake cable assembly measures 49-1/8 overall x 41 housing, Driver side brake cable assembly measures 37 7/8 overall x 30 5/8 housing
- Replacing your worn brake cables will allow your golf cart to perform as intended
- Both Driver & Passenger side brake cable included, easy to install
- See more on Amazon...
Brand: 10L0L | Manufacturer: 10L0L Direct
See On Amazon
Looking For Something Else?
Search