UCTRONICS for Raspberry Pi PoE Splitter 5V [2-Pack] - Active PoE to Micro USB Adapter, IEEE 802.3af Compliant, for Tablets, Dropcam and Raspberry Pi 2/3, and More
Asin: B07QPRVM51
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.What’S Special About It - Poe To Micro Usb. That Means It Adds Plug-And-Play Poe Support To Raspberry Pi Models Even They Are Not 3 B+ And Cannot Accommodate A Raspberry Pi Poe Hat. It Makes Full Use Of Poe Switches Because The Other End Of The Poe Port Could Be Any Micro Usb Devices Instead Of A 48V Poe Network Device.
Note - 1: Just Put The Split Ethernet Aside If You Don’T Need The Data. 2: For One Pack, Check B01mdluse7; For Gigabit Poe Switch Or A Raspberry Pi 3 B+, Check Gigabit Poe Splitter B07cnkx14c; For 12V Barrel Port, Check B01mpww2uv. 3: The Split Ethernet Cable Does Not Carry Power, But You Can Add A Usb Ethernet Adapter To It If Your Device Takes Network From Usb.
What Else Is Needed - You Need An Ieee 802.3Af Compliant Poe Switch Or Injector To Serve As The Pse (Power Source Equipment,) An Ethernet Cable With The Proper Length You Need, And Devices Powered Via Micro Usb. These Are Not Included In Our Package.
What Is Poe - Poe Enables You To Deliver Power And Data With A Single Ethernet Cable, And Thus Fewer Wall Plugs Are Needed And Fewer Cables Are Messed. It Also Helps You Extend Powerline To Where There Are No Ac Outlets Nearby But Your Ethernet Cable Can Reach, Up To 300 Feet Away From The Power Source.
Features
- What is it - A 5v UCTRONICS PoE splitter to split the PoE signal into micro USB power supply and Ethernet in RJ45, so that non-PoE devices can be powered over Ethernet. Reportedly used on micro USB devices like Raspberry Pi, Amazon Ethernet Adapter for Fire TV, Amazon Cloud Cam, Echo Dot (2nd Gen), Wyze Cam v2, Arlo 2 Pro, ASUS Tinker Board, Nano Pi, Chromecast, and so on
- What is PoE - PoE enables you to deliver power and data with a single Ethernet cable, and thus fewer wall plugs are needed and fewer cables are messed. It also helps you extend powerline to where there are no AC outlets nearby but your Ethernet cable can reach, up to 300 feet away from the power source
- What s special about it - PoE to Micro USB. That means it adds plug-and-play PoE support to Raspberry Pi models even they are not 3 B+ and cannot accommodate a Raspberry Pi PoE HAT. It makes full use of PoE switches because the other end of the PoE port could be any micro USB devices instead of a 48V PoE network device
- What else is needed - You need an IEEE 802.3af compliant PoE switch or injector to serve as the PSE (Power Source Equipment,) an Ethernet cable with the proper length you need, and devices powered via micro USB. These are not included in our package
- Note - 1: Just put the split Ethernet aside if you don t need the data. 2: For one pack, check B01MDLUSE7; For gigabit PoE switch or a Raspberry Pi 3 B+, check Gigabit PoE splitter B07CNKX14C; For 12V barrel port, check B01MPWW2UV. 3: The Split Ethernet cable does not carry power, but you can add a USB Ethernet adapter to it if your device takes network from USB
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.94 x 6.69 x 4.72 inches
See On Amazon Similar To UCTRONICS for Raspberry Pi PoE
#1
UCTRONICS PoE Splitter USB-C 5V - Active PoE to USB-C Adapter, IEEE 802.3af Compliant for Raspberry Pi 4, Google WiFi, Security Cameras, and More
Asin: B087F4QCTR | Model: GuangDa | PartNumber: GuangDa
Why Poe To Usb-C – A Cost-Effective Way To Add Plug-And-Play Poe Support To 5V Usb-C Powered Devices And Make Full Use Of Poe Switches, Or For A Raspberry Pi 4 Setup Where A Poe Hat Is Not Applicable.
Note – 1. This Splitter Does Not Support Pd Or Qc Fast Charging Protocols. 2. This Splitter Provides A Maximum Output Of 2.4A With Its 802.3Af Compliance. Check B07v35dh5f For Power-Hungry Applications. 3. Just Put The Split Ethernet Aside If You Don’T Need The Data. 4. The Split Ethernet Cable Does Not Carry Power Anymore..
What Else Needed - You Need An Ieee 802.3Af Compliant Poe Switch Or Injector To Serve As The Pse (Power Source Equipment) And An Ethernet Cable With Poe Signal To Feed The Splitter..
What Is Poe – Deliver Power And Data With A Single Ethernet Cable For Fewer Wall Plugs And Messed Cables. Extend Powerline To Where No Ac Outlets Are Nearby, Up To 300 Feet Away From The Power Source.
Features
- What is it - A UCTRONICS PoE splitter to split the PoE signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-PoE devices can be powered over Ethernet.
- What is PoE Deliver power and data with a single Ethernet cable for fewer wall plugs and messed cables. Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source
- Why PoE to USB-C A cost-effective way to add plug-and-play PoE support to 5V USB-C powered devices and make full use of PoE switches, or for a Raspberry Pi 4 setup where a PoE HAT is not applicable
- What else needed - You need an IEEE 802.3af compliant PoE switch or injector to serve as the PSE (Power Source Equipment) and an Ethernet cable with PoE signal to feed the splitter.
- Note 1. This splitter does not support PD or QC fast charging protocols. 2. This splitter provides a maximum output of 2.4A with its 802.3af compliance. Check B07V35DH5F for power-hungry applications. 3. Just put the split Ethernet aside if you don t need the data. 4. The Split Ethernet cable does not carry power anymore.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.92 x 3.22 x 1.12 inches
See On Amazon #2
UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter Power Over Ethernet 48V to 5V 2.4A for Tablets, Dropcam or Raspberry Pi 2/3B+ (48V to 5V 2.4A)
Asin: B01MDLUSE7 | Model: U5159 | PartNumber: U5159
Compatible With 44-57V Dc Voltage, Overvoltage Protection.
Suitable For Android Tablets, Dropcam, Raspberry Pi – Micro Usb. 2-Pack: B07qprvm51.
Support Ieee 820.3Af Poe Switch, 48V Unsolicited Power Over Ethernet Poe Switch Or Ethernet Poe Adapter, 48V Injector. For Gigabit Poe Switches Users, Gigabit Splitter U515902 Is Recommended.
Power Output Port: 5V 2.4A Micro Usb Power Plug.
Features
- 12 watt micro USB Power over Ethernet PoE up to Remote 328-492ft (100-150m) via Ethernet cable, 802.3af PoE switch or 48v injector is needed
- Power Output Port: 5V 2.4A Micro USB Power Plug
- Compatible with 44-57V DC voltage, overvoltage protection
- Support IEEE 820.3af PoE Switch, 48V Unsolicited Power Over Ethernet PoE Switch or Ethernet PoE Adapter, 48v injector. For gigabit PoE switches users, gigabit splitter U515902 is recommended
- Suitable for Android Tablets, Dropcam, Raspberry Pi Micro USB. 2-Pack: B07QPRVM51
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 1.97 x 3.15 x 0.59 inches | Weight: 0.13 pounds
See On Amazon #3
UCTRONICS 19 1U Rack Mount for Raspberry Pi with SSD Mounting Brackets, Thumbscrews Front Removable Bracket Supports Up to 4 Raspberry Pi 5, 3B/3B+, 4B and 4 SSDs, Option SD Card Adapter
Asin: B09QQ9TQWL | Model: U6261 | PartNumber: U6261
Easy To Setup: Just Use Two Included Thumbscrews To Mount The Rackmount, Which Adopts A Screw-In Design, Which Helps You Install And Replace Quickly And Easily, No Tools Needed!.
Optional Accessories: Single Mounting Bracket: B09gfqlpty; Micro Sd Card Extension Adapter Asin: B09ckrdfth. I/O Panel: B09fxrqpfm.
Compatible With Poe/Poe+ Hat: You Can Use Raspberry Pi Official Poe+ Hat And Our Poe Hat On It, Search B082zldmz6 To Get Mini Poe Board Or Search B09mcgfx12 To Get Fan Version..
Applications: This Is A Hardware Solution To Get Ingenious Use Of The Raspberry Pi, With This Kit And Open Source Software Openmediavault, You Can Use The Pi As A Nas Server, Surveillance Station, Or Even A Web Server..
The Ssd Mounting Bracket Also Has Two Holes Reserved For The Sd Card Extension Adapter Asin: B09ckrdfth, Which Allows You To Access The Sd Card From The Front Of The Rack..
Features
- Design for Raspberry Pi: Supports installation of 4 Raspberry Pis and 4 ssds, compatible with any 2.5 Solid State Drive (7mm/9mm) and Rpi 4B/3B+, and other B/B+ models.
- The SSD mounting bracket also has two holes reserved for the SD card extension adapter ASIN: B09CKRDFTH, which allows you to access the SD card from the front of the rack.
- Easy to Setup: Just use two included thumbscrews to mount the rackmount, which adopts a screw-in design, which helps you install and replace quickly and easily, no tools needed!
- Applications: This is a hardware solution to get ingenious use of the Raspberry Pi, with this kit and open source software OpenMediaVault, you can use the Pi as a NAS Server, Surveillance station, or even a Web server.
- Optional accessories: Single mounting bracket: B09GFQLPTY; Micro SD card extension adapter ASIN: B09CKRDFTH. I/O Panel: B09FXRQPFM
- Compatible with PoE/PoE+ HAT: You can use Raspberry Pi official POE+ HAT and our POE HAT on it, search B082ZLDMZ6 to get mini PoE board or search B09MCGFX12 to get fan version.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 2.50 x 20.00 x 4.50 inches | Weight: 1.70 Pounds
See On Amazon #4
UCTRONICS 19" 1U Rackmount for Raspberry Pi, SSD Bracket for Any 2.5" SSDs, Hold Up to 5 Raspberry Pi 5/4B Boards, Front-Removable with Captive Screws
Asin: B09STTXWZZ | Model: U6264 | PartNumber: U6264
The Ssd Bracket Also Has Two Holes Reserved For The Sd Card Extension Adapter Asin: B09ckrdfth, Allowing You To Access The Sd Card From The Front Of The Rackmount. Note: The Sata To Usb Adapter Is Not Included, Please Search For Asin: B09cd94g5r To Get The Sata Adapter As You Need..
Compatible With Poe Hat: Compatible With Mini Poe Hat On It, Search B082zldmz6 To Get Mini Poe Board Or Search B09mcgfx12 To Get Fan Version..
Easy To Setup: Uses Captive Loose-Off Screws For True No-Installation, No Screwdriver Is Needed To Introduce Your Module Into The Enclosure..
Support Up To 5 Modules: This Solution Allows You To Use Multiple Pi Boards At The Same Time. With Hardware Connections, You Can Install Up To Five Modules, Which Is More Beneficial For You To Create Clusters For Distributed Computing Or Manage Cluster Tasks..
Features
- Designed for Raspberry Pi and 2.5-inch SSD: Supports installation of 5 Raspberry Pis and 5 ssds, compatible with any 2.5 Solid State Drive (7mm) and Rpi 4B/3B+, and other B/B+ models. Please note that the thickness of a 2.5" SSD cannot exceed 7mm.
- Support Up to 5 modules: This solution allows you to use multiple pi boards at the same time. With hardware connections, you can install up to five modules, which is more beneficial for you to create clusters for distributed computing or manage cluster tasks.
- The SSD bracket also has two holes reserved for the SD card extension adapter ASIN: B09CKRDFTH, allowing you to access the SD card from the front of the rackmount. NOTE: The SATA to USB adapter is not included, please search for ASIN: B09CD94G5R to get the SATA adapter as you need.
- Easy to Setup: Uses Captive loose-off screws for true no-installation, no screwdriver is needed to introduce your module into the enclosure.
- Compatible with PoE HAT: Compatible with mini POE HAT on it, search B082ZLDMZ6 to get mini PoE board or search B09MCGFX12 to get fan version.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 1.75 x 19.00 x 4.33 inches
See On Amazon #5
UCTRONICS PoE Splitter Gigabit 5V - Micro USB Power and Ethernet to Raspberry Pi 3B+, Work with Echo Dot, Most Micro USB Security Camera and Tablet - IEEE 802.3af Compliant
Asin: B07CNKX14C | Model: U515902 | PartNumber: U515902
Extend Powerline - Deliver Power To Micro Usb Devices Without Nearby Ac Outlets And Upgrade Them To Poe (Power Over Ethernet) From Up To 400 Feet.
Save Your Time - Plug And Play Compatibility And Quick Seller Response. Note: An 802.3Af Compliant Poe Injector/Switch Is Required To Use This Device (Not Included).
Replace Power Supply - Remove The Need For A Separate Power Supply If The Ethernet Cable Is A Must-Have For Your Micro Usb Devices.
Poe Hat Alternative - Use No Gpio Pins. Compatible With Raspberry Pi Case With Fan Or Add-On Screen. Support Raspberry Pi 3B+ And Previous Models.
Features
- 5V/2.4A & 1000Mbps - Power micro-USB devices via an Ethernet cable, along with gigabit data transfer (which you can put aside if you only need power)
- PoE HAT Alternative - Use no GPIO pins. Compatible with Raspberry Pi case with fan or add-on screen. Support Raspberry Pi 3b+ and previous models
- Extend Powerline - Deliver power to micro USB devices without nearby AC outlets and upgrade them to PoE (Power over Ethernet) from up to 400 feet
- Replace Power Supply - Remove the need for a separate power supply if the Ethernet cable is a must-have for your micro USB devices
- Save Your Time - Plug and play compatibility and quick seller response. NOTE: an 802.3af compliant PoE injector/switch is required to use this device (not included)
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 1.97 x 3.15 x 0.59 Inches
See On Amazon #6
UCTRONICS Front Removable 1U Rack Mount for Raspberry Pi, with 4 Mounting Brackets for Raspberry Pi 5, 4B, 3B+/3B, and Other B Models
Asin: B09D7RR6NY | Model: U6195 | PartNumber: U6195
Improvement - Thumbscrew, Quality Metal Material, And The Grip Knob Thumb Screw Adopt A Screw-In Design, Which Helps You Install And Replace Quickly And Easily, No Tools Needed!.
Options - Sd Card Extension Cable Asin: B09ckrdfth Is Available To Make A Different Configuration For Your Different Pi Racks..
Standard 1U Size: 19"×1.75"(482.6×44.5Mm), Fully Compatible With 19” Server Racks, Had No Issue Plugging This Into The 1U Rack Space..
Wide Compatibility- The Rackmount Can House Up To 4 Rpis, And The Rpi Mounting Bracket Supports Raspberry Pi 4 B And 3 B/B+ And All Other B Models..
Features
- IMPROVEMENT - Front-Removable, the mounting bracket allows each Raspberry Pi can be individually removed from the front without removing the whole thing.
- Wide Compatibility- The rackmount can house up to 4 RPis, and the RPi mounting bracket supports Raspberry Pi 4 B and 3 B/B+ and all other B models.
- IMPROVEMENT - Thumbscrew, quality metal material, and the grip knob thumb screw adopt a screw-in design, which helps you install and replace quickly and easily, no tools needed!
- Standard 1U Size: 19 1.75(482.6 44.5mm), fully compatible with 19 server racks, had no issue plugging this into the 1U rack space.
- Options - SD card Extension Cable ASIN: B09CKRDFTH is available to make a different configuration for your different Pi racks.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 6 Months
See On Amazon #7
UCTRONICS Upgraded Complete Enclosure for Raspberry Pi Cluster, Compatible with Pi 5, 4B, 3B+/3B, and Other B Models, House Up to 4 2.5" SSD, Support PoE/PoE+ HAT and Switch, 2 Cooling Fans
Asin: B09S11Q684 | Model: U6260 | PartNumber: U6260
【Front Removable】 Each Baseplate Is Independent So As To Easily Slide In-And-Out, Just Fixed With Captive Loose-Off Screws, Allowing You Very Convenient And Quick Access To Each Node Within The Cluster For Maintenance..
【Applications】This Is The Perfect Solution For Building Pi Array, Pi Nas, Pi Lan Lab Or Other Projects Need To Organize Your Raspberry Pis In A Manageable Way..
【Front Removable】 Each Baseplate Is Independent So As To Easily Slide In-And-Out, Just Fixed With Captive Loose-Off Screws, Allowing You Very Convenient And Quick Access To Each Node Within The Cluster For Maintenance..
【Wide Compatibility】 Designed To House 4×Raspberry Pi 4B, 3B+/3B, Or Other B Models, 4×2.5” Ssds And Ethernet Switch In A Cluster Case. You Can Use It As A Complete Desktop Nas. It Also Has Holes Reserved For The Sd Card Extension Adapter (Asin: B09ckrdfth) Which Allows You To Access The Sd Card From The Front Of The Case. Please Note That The Thickness Of A 2.5" Ssd Cannot Exceed 7Mm..
Features
- Improvement Upgraded from our previous UCTRONICS for Raspberry Pi cluster case U6243 ASIN:B09JNHKL2N . Now you can power your fans while using PoE HAT. Compatible with Raspberry Pi official PoE+ HAT and UCTRONICS mini PoE HAT(ASIN:B082ZLDMZ6). Also We replaced the thumbscrews with captive loose-off screws on the mounting brackets, which greatly improves the stability of the brackets. The front and back panel openings are expanded to support more models of switches.
- Wide compatibility Designed to house 4 Raspberry Pi 4B, 3B+/3B, or other B models, 4 2.5 SSDs and Ethernet switch in a cluster case. You can use it as a complete desktop NAS. It also has holes reserved for the SD card extension adapter (ASIN: B09CKRDFTH) which allows you to access the SD card from the front of the case. Please note that the thickness of a 2.5 SSD cannot exceed 7mm.
- Front Removable Each baseplate is independent so as to easily slide in-and-out, just fixed with captive loose-off screws, allowing you very convenient and quick access to each node within the cluster for maintenance.
- Front Removable Each baseplate is independent so as to easily slide in-and-out, just fixed with captive loose-off screws, allowing you very convenient and quick access to each node within the cluster for maintenance.
- Applications This is the perfect solution for building Pi Array, Pi NAS, Pi LAN lab or other projects need to organize your Raspberry Pis in a manageable way.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 3.11 x 8.82 x 6.54 inches | Weight: 1.96 Pounds
Warranty: 6 months
See On Amazon #8
UCTRONICS Gigabit PoE Splitter 5V 3A, 2-in-1 PoE to USB C/Micro USB Adapter, IEEE 802.3af/at Compliant 10/100/1000Mbps for Raspberry Pi 3/4, Security IP Cameras and More
Asin: B0BLBX1795
【Power Supply & Data Transmission】It Supplies Power And Transfers Data Between Poe Switch/ Poe Injector And Non-Poe Device Meanwhile Via One Single Ethernet Cable To Poe Devices, Expanding Network To Anywhere You Need Network Devices But No Power Lines Or Outlets..
【Wide Compatibility】The Gigabit Poe Splitter Is Compatible With Raspberry Pi 4B+/4B/3B+/3B, Security Ip Cameras, Tablets, Smart Home Devices, Ip Phones, Wireless Aps And Other Non-Poe Devices.
【Plug & Play】 Just Plug The Adapter On The Poe Splitter Into The Micro Usb Port, Then The Micro Usb Port Is Changed To Be A Usb-C Port. Set Up Easily, Switch Freely, And Transfer Stably..
【Gigabit Ieee 802.3Af/At Compliant】Power Over Ethernet Ieee 802.3Af/At Compliant; 10/100/1000 Mbps Rj45 Ports; 5V 3A Power Supply; With Overvoltage Protection, Short-Circuit Protection And Overcurrent Protection..
Features
- 2-in-1 port A Micro USB to USB-C adapter is added on the PoE Splitter to make it a 2-in-1 PoE Splitter, making PoE to Micro USB and USB C devices more easily accessible.
- Gigabit IEEE 802.3af/at Compliant Power over Ethernet IEEE 802.3af/at compliant; 10/100/1000 Mbps RJ45 ports; 5V 3A power supply; with overvoltage protection, short-circuit protection and overcurrent protection.
- Power Supply & Data Transmission It supplies power and transfers data between PoE switch/ PoE injector and non-PoE device meanwhile via one single ethernet cable to PoE devices, expanding network to anywhere you need network devices but no power lines or outlets.
- Plug & Play Just plug the adapter on the PoE splitter into the Micro USB port, then the Micro USB port is changed to be a USB-C port. Set up easily, switch freely, and transfer stably.
- Wide Compatibility The Gigabit PoE splitter is compatible with raspberry pi 4B+/4B/3B+/3B, Security IP Cameras, Tablets, Smart Home Devices, IP phones, wireless APs and other non-POE devices
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 1 year warranty
See On Amazon #9
UCTRONICS PoE HAT for Raspberry Pi 4B/3B+, Power Over Ethernet (PoE) Support 802.3af PoE Network Standard, Compatible with Pi 4B / 3B+
Asin: B082ZLDMZ6 | Model: U6109 | PartNumber: U6109
Output Power: Dc 5V (2.5A Max); Total Power Budget: 12.5W; Ieee 802.3Af Compliant.
Well-Ventilated Environment Recommended: It’S Normal To Become Hot When The Hat Operating. Please Make Sure The Adequate Air Circulation To Help It Dissipate Heat To Ensure Stable Operation. If Used With Pi 4, You Can Search Asin B07wmnxb4v To Get The Case With The Fan..
Smaller Size: 65*44*13Mm, Nearly Half The Official Size, Save More Space For Your Other Hardware, Can Be Held In The Most Case For Raspberry Pi..
Update: This Lastest Uc-858 Mini Poe Hat Compatible With 48V Non-Standard Switches So It Can Supports More Brands Of Switches..
Features
- For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included). Note: It's not recommend to use RJ45 with aluminum foil shielding to connect the PoE Hat to the PoE switch.
- Update: This lastest UC-858 mini PoE HAT Compatible with 48V non-standard switches so it can supports more brands of switches.
- Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant
- Smaller Size: 65*44*13mm, nearly half the official size, save more space for your other hardware, can be held in the most case for Raspberry Pi.
- Well-ventilated Environment Recommended: It s normal to become hot when the HAT operating. Please make sure the adequate air circulation to help it dissipate heat to ensure stable operation. If used with Pi 4, you can search ASIN B07WMNXB4V to get the case with the fan.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.94 x 3.10 x 2.20 inches
See On Amazon
Looking For Something Else?
Search