BLTouch Servo Extension Cable Set (SM-DU-1000)
Asin: B07R112MLD | Ean: 0810012584401 | UPC: 810012584401
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: SM-DU-1000 | Manufacturer: ANTCLABS
See On Amazon Similar To BLTouch Servo Extension Cable Set
#1
Tecunite 20 Pieces 3-pin Servo Extension Cable Wire Cord Female to Male RC Servo Extension Cord Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(5 Sizes)
Asin: B07C18BXDV | Model: TecUnite-Servo Extension-01 | PartNumber: TecUnite-Servo Extension-01 | Ean: 0615517140394 | UPC: 615517140394
3-Pin Servo Extension Wire: Each Servo Extension Has 3 Pieces Of 0.08Ts Wires, Universal Model; Connectors With 3 Pins And Have An Angle In Case You Will Install Incorrectly, Convenient For Use.
Package Includes: 20 Pieces Of Female To Male Servo Extension Cable Wires With 5 Different Lengths, Enough For You To Use On Different Occasions.
Female To Male Servo Extension Cable: Featured With Female Connector On One Side And Male Connector On The Other Side, Can Be Connected To The Receiving Set And Steering Engine.
Application: These Servo Extension Leads Are Compatible With Futaba And Jr Servo, Plane And Helicopter Servo Connection Or Receiver Connection, Remote Control Car, Rc Car.
Features
- Servo extension cord sizes: have 5 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 4 pieces servo extension cords
- Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car
- 3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model; Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use
- Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine
- Package includes: 20 pieces of female to male servo extension cable wires with 5 different lengths, enough for you to use on different occasions
- See more on Amazon...
Brand: TecUnite | Manufacturer: TecUnite
Dimensions: 0.63 x 5.91 x 4.72 inches | Weight: 0.20 Pounds
See On Amazon #2
DYWISHKEY 30 Pieces Male to Female 3-Pin Servo Extension Cord Lead Wire Cable Connectors, Servo Remote Control Cables (5 Sizes)
Asin: B08HWMRKRZ | Model: DIY---SERVO---CABLE---30PCS | PartNumber: DIY---SERVO---CABLE---30PCS | Ean: 0659499112666 | UPC: 659499112666
【Design】--- The Connector Of These Wires Are Style Connector With 3 Pins, Featured With Female Connector On One Side And Male Connector On The Other Side, Can Be Connected To The Receiving Set And Steering Engine, And It Has An Angle, In Case You Will Install Incorrectly, Very Convenient..
【Wide Applications】--- These Servo Extension Leads Can Be Applied For Futaba And Jr Servo, Plane And Helicopter Servo Connection Or Receiver Connection, Remote Control Car, Rc Car. The Kit Has Lots Of Different Sizes, Which Can Meet The Maximum Of Requirement For You..
【Package】--- This Package Includes 30 Pieces Of Female To Male Servo Extension Cable, 5 Different Lengths And Each Length Has 6 Pieces, Enough For You To Use, Different Length Can Meet Your Different Needs..
【Sizes】--- 5 Different Lengths Of 10 Cm/ 3.95 Inch, 15 Cm/ 5.9 Inch, 30 Cm/ 11.8 Inch, 50 Cm/ 19.7 Inch And 60 Cm/ 23.6 Inch, Each Length Has 6 Pieces Servo Extension Cords, Different Sizes Can Meet Your Different Needs..
Features
- HIGH QUALITY --- Made with high quality 22 AWG wire, the contact material is pure copper, ensuring a firm connection every time, which can ensure long time using.
- SIZES --- 5 different lengths of 10 cm/ 3.95 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 6 pieces servo extension cords, different sizes can meet your different needs.
- DESIGN --- the connector of these wires are style connector with 3 pins, featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine, and it has an angle, in case you will install incorrectly, very convenient.
- PACKAGE --- This package includes 30 pieces of female to male servo extension cable, 5 different lengths and each length has 6 pieces, enough for you to use, different length can meet your different needs.
- WIDE APPLICATIONS --- These servo extension leads can be applied for Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car. The kit has lots of different sizes, which can meet the maximum of requirement for you.
- See more on Amazon...
Brand: DYWISHKEY | Manufacturer: DYWISHKEY
See On Amazon #3
30 Pcs 3-Pin Extension Cable Cord Male to Female Lead Wire Connectors for Servo Extension Connection Control Board Remote Control Parts - 5 Sizes
Asin: B08BF4C6S2 | Model: MT-RC-30 | PartNumber: MT-RC-30 | Ean: 0789659002541 | UPC: 789659002541
3-Pin Wire Connector Design: These Servo Extension Cable Connectors With 3 Pins And Have An Angle In Case You Will Install Incorrectly, Convenient To Use.
Item Quantity: Package Come With 30 Pieces Of Female To Male Servo Extension Cable Wires, Enough For You To Use On Different Occasions.
Female To Male Servo Extension Cable: Featured With Female Connector On One Side And Male Connector On The Other Side, Can Be Connected To The Receiving Set And Steering Engine.
Widely Application: These Servo Extension Lead Cables Are Compatible With Futaba And Jr Servo, Plane And Helicopter Servo Connection Or Receiver Connection, Remote Control Car, Rc Car.
Features
- 5 Sizes: 5 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 6 pieces servo extension cords
- Widely Application: These servo extension lead cables are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car
- 3-Pin Wire Connector Design: These servo extension cable connectors with 3 pins and have an angle in case you will install incorrectly, convenient to use
- Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine
- Item Quantity: Package come with 30 pieces of female to male servo extension cable wires, enough for you to use on different occasions
- See more on Amazon...
Brand: MoTrent | Manufacturer: MoTrent
See On Amazon #4
R REIFENG 4pcs 2M Motor Connector Cables XH2.54 4pin to XH2.0 6pin White Terminal Paralled Motor Wires for 3D Printer Stepper Motor Extension Cable
Asin: B07SLPLPL2 | Ean: 6934596032319
★High Quality For Durable And Long-Lasting Use..
★Suitable For 3D Printer Stepper Motor..
★Lightweight For Portable Installation..
★Length:2M/6.56Ft,Specification: Xh2.54 4 Pin To 6 Pin,Female White Terminal.
Features
- 2M 3D Printer Stepper Motor Cable Connector Line
- Length:2M/6.56ft,Specification: XH2.54 4 pin to 6 pin,Female White Terminal
- High quality for durable and long-lasting use.
- Lightweight for portable installation.
- Suitable for 3D Printer stepper motor.
- See more on Amazon...
Brand: R REIFENG | Manufacturer: WJ-61KL
See On Amazon #5
FYSETC 3D Printer Parts Ender 3 Stepper Motor Cable X Y Z Axis Stepper Motor and Limited Switch Endstop Cable for Ender 3/ Ender 3 Pro/Ender 3X-3Pcs
Asin: B08BJXW1MK
One-Piece Plug Design, Easy To Install, Hard To Snap, Convenient To Plug Or Release..
After-Sales Guarantee: Each One Defective Item Can Have The Free Replace Or Refund, If Need Further Please Fell Free To Email Or Qa Us, We And Our Engineers Are Very Happy To Assist You..
Packaging Includes：1 X X/E Axis Cable,1 X Y Axis Cable,1 X Z Axis Cable,.
Total Cable Length：X/E Axis: About 790Mm/31Inch(The Longest Terminal About 900Mm/35.4Inch),Y Axis:About 400Mm/15.7Inch, Z Axis: About 300Mm/11.8Inch..
Features
- Ender 3 stepper motor cable, Compatible with Ender 3 / Ender 3 Pro/Ender 3X Printer Limit Switch
- Total cable length X/E Axis: about 790mm/31inch(the longest terminal about 900mm/35.4inch),Y Axis:about 400mm/15.7inch, Z Axis: about 300mm/11.8inch.
- One-piece plug design, easy to install, hard to snap, convenient to plug or release.
- Packaging includes 1 x X/E Axis Cable,1 x Y Axis Cable,1 x Z Axis Cable,
- After-sales Guarantee: each one defective item can have the free replace or refund, If need further please fell free to email or QA us, we and our engineers are very happy to assist you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Weight: 0.22 Pounds
See On Amazon #6
15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (11.8 Inch)
Asin: B0983HX952
Package Includes: This Package Includes 15 Pieces Of Male To Female Servo Extension Cables, Enough Quantity For You To Use And Replacement, Providing More Convenience For You.
Useful Function: The Servo Extension Wire Is Suitable For Jumping From Board To Board, Or Can Be Applied To Control Panel Cable Remote Control, Which Is Male To Female.
Feature: This Male To Female Servo Extension Cord Featured With Female Connector On One Side, And Male Connector On The Other Side, Can Be Connected To The Receiving Set And Steering Engine.
Appropriate Sizes: The Servo Extension Cord Measures Approx. 300 Mm/ 11.8 Inch In Length, Universal Size For Your Use, The Color Is Black And Red.
Features
- Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more
- Appropriate sizes: the servo extension cord measures approx. 300 mm/ 11.8 inch in length, universal size for your use, the color is black and red
- Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you
- Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine
- Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
See On Amazon #7
Box3D 3D printer direct drive stepper motor extension cable for Ender 3 Ender 3 Pro Ender 3 V2 Ender 5 plus pvoxelab Aquila 3 pcs x 05m
Asin: B0B3Y4MHYN | Model: Box3D003 | PartNumber: Box3D003 | Ean: 0785034120510 | UPC: 785034120510
Brand: Box3D | Manufacturer: Box3D
See On Amazon #8
R REIFENG 4pcs 2M 3D Printer Parts Cooling Fan Extension Cable Wire 2pin Xh2.54 Connection Line Male Female
Asin: B09BN5X6ZT | Model: WJ-09-012 | PartNumber: WJ-09-012
Lightweight For Portable Installation..
Length:2M/6.56Ft,.
Scientific Design,Practical.Used For 3D Printer Cooling Fan..
Specification:Xh2.54 2Pin Female Male Terminal.
Features
- Material:Plastic,High quality for durable and long-lasting use.
- Specification:XH2.54 2Pin Female Male Terminal
- Lightweight for portable installation.
- Scientific design,practical.Used for 3d printer cooling fan.
- Length:2M/6.56ft,
- See more on Amazon...
Brand: R REIFENG | Manufacturer: R REIFENG
See On Amazon #9
BIGTREETECH 2 Types BLTouch Extension Cables + Mount Bracket Compatible with Ender 3, Ender-3 Pro, Ender-3 V2, Ender-3S, CR-10, Ender 5, Ender 5 Pro with SKR Mini E3 V3.0, Octopus, Manta Series Board
Asin: B08G8B23L7 | Model: VVV001876 | PartNumber: VVV001876 | Ean: 0779605889906 | UPC: 779605889906
🎅[Premium Quality]: Made Of High Quality Metal Material, It Is Durable, Wear Resistant And High Strength..
🎅[Warm Notice ]: The Bltouch Extension Cable Can Not Fit For Cr10 3D Printer, Because The Terminal And Position Of Cable Are Different. You Can Change The Terminal And Rearrange The Position Of Cables By Flathead Screwdriver, Tweezers Or A Cutter..
🎅[Packing Includes]: 1 X Mount Bracket, 1X 1M Bl Touch Extension Cable, 1X 1.5M Bltouch Extension Cables, 2 X M3x8mm Screw, 2 X M3x6mm Screw..
🎅[Wide Application]: Suitable For Ender 3 V2, Ender-3, Ender-3S, Ender 3 Pro, Cr-10, Ender-5, Ender-5 Pro 3D Printer, Compatible With Skr Mini E3 V3.0, Octopus V1.1,Octopus Pro, Skr 3, Skr 3 Ez, Skr V1.4 Turbo, Manta M4p/M5p/M8p, Manta E3 Ez, Kraken, Mks Gen L... Series 3D Printer Motherboard.
Features
- [Easy to Install]: Simple operation and very easy to install.
- [Wide Application]: Suitable for Ender 3 V2, Ender-3, Ender-3S, Ender 3 Pro, CR-10, Ender-5, Ender-5 Pro 3D Printer, Compatible with SKR Mini E3 V3.0, Octopus V1.1,Octopus Pro, SKR 3, SKR 3 EZ, SKR V1.4 Turbo, Manta M4P/M5P/M8P, Manta E3 EZ, Kraken, MKS Gen L... series 3D Printer motherboard
- [Premium Quality]: Made of high quality metal material, it is durable, wear resistant and high strength.
- [Packing Includes]: 1 x mount bracket, 1x 1M bl touch extension cable, 1x 1.5M BLtouch extension cables, 2 x M3x8mm Screw, 2 x M3x6mm Screw.
- [Warm Notice ]: The bltouch extension cable can not fit for CR10 3D Printer, because the terminal and position of cable are different. You can change the terminal and rearrange the position of cables by flathead screwdriver, tweezers or a cutter.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Direct
Weight: 0.06 ounces
See On Amazon #10
FYSETC Ender 5 Plus Stepper Motor Limit Switch Extension Cable: Not Replacement for X/Y/E Dual Z to Extend Stock Wires About 50cm/19in Length for Ender 5 Pro 3D Printer Accessories - Pack of 1 Set
Asin: B09XQVDWCW
3. Easy Installation: Connect The Male Terminals On This Extension Cable With The Factory Stepper Motor & Limit Swtich Cable, Then The Other Female Ends Of This Extending Wire For The Endstop Pcb Board Or Controller Motherboard. Attach Them To The Gantry Kit To Route Properly For A Clean Look And Safe Operation. You Can Peel Each Piece Into 2 Cables To Get A Separate Motor Extension Cable And A Limit Switch Extension Cable..
5. Note: We Only Test This Extension Cable Set On Ender 5 Series, Not On Ender 3 Or Ender 3 Pro. If Need Other 3D Printer Part For Ender 5 Or Plus, Such As 235X235 Build Plate, 377X370 Spring Steel Sheet, Or Ender 5 Plus Hotbed Heater Mat, Please Go To Our Shop..
4. High Quality: Well Made, Oem Quality, Nicely Tucked Wires And Not In Harness Way. One-Piece Plug Design, Easy To Install, Hard To Snap, Convenient To Plug Or Release..
2.Cable's Length(Including The Connectors)：X Axis:650Mm/25.59In，Y Axis:650Mm/25.59In，Dual Z Axis:320Mm/12.59In, E Axis: 520Mm/ 20.47Inch. To Meet The Need Of Enlarge Room When Assembly. If The Length Is Still Not Long Enough For Your 3D Printing Project, Please Feel Free To Mail Us. We Can Provide You The Suitable One..
Features
- 1.Upgrade FDM 3D Printer Accessory: YES, this cable set is Much shorter than the stock one. NOT Drop-in Replacement, Just Used for Extending connection, Must be installed with the factory cables. Package Content: 1 Set Ender 5 - Ender 5 Pro -Ender 5 Plus Stepper Motor limit switch Connection Extension Cable for X Y Z Extruder. Each piece clearly marked for an axis with connectors, the extra Z axis extension is to respond to some customers' voice for Ender 5 Plus Dual Z motor.
- 2.Cable's length(including the connectors) X Axis:650mm/25.59in Y Axis:650mm/25.59in Dual Z Axis:320mm/12.59in, E axis: 520mm/ 20.47inch. To meet the need of enlarge room when assembly. If the length is still not long enough for your 3d printing project, please feel free to mail us. We can provide you the suitable one.
- 3. Easy Installation: Connect the Male Terminals on this extension cable with the factory Stepper Motor & Limit Swtich cable, then the other Female Ends of this extending wire for the endstop pcb board or controller motherboard. Attach them to the gantry kit to route properly for a clean look and safe operation. You can peel each piece into 2 cables to get a separate motor extension cable and a limit switch extension cable.
- 4. High Quality: Well made, OEM quality, Nicely tucked wires and not in harness way. One-piece plug design, easy to install, hard to snap, convenient to plug or release.
- 5. Note: We only test this extension cable set on Ender 5 series, not on ender 3 or ender 3 pro. If need other 3d printer part for ender 5 or plus, such as 235x235 build plate, 377x370 spring steel sheet, or ender 5 plus hotbed heater mat, please go to our shop.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #11
BLTouch : Auto Bed Leveling Sensors for 3D Printers
Asin: B01FFV2TOS | Model: BLTouch-Smart | PartNumber: BLTouch-Smart | Ean: 0732235133337 | UPC: 732235133337
Simple, Smart, Precise.
It Could Work With All Kinds Of Bed Materials, Such As Glasses, Woods, Metals, And So On.
Always Check That You Use A Firmware That Has Support For The Bltouch.
Features
- BL Touch Smart Latest Model
- Always check that you use a firmware that has support for the BLTouch
- Simple, Smart, Precise
- It could work with all kinds of bed materials, such as glasses, woods, metals, and so on
- See more on Amazon...
Brand: ANTCLABS | Manufacturer: ANTCLABS
Dimensions: 1.98 x 1.02 x 0.45 inches | Weight: 0.04 pounds
See On Amazon #12
FYSETC 3D Printer Vorn 2.4 Stepper Motor Extension Cables 2PCS : XH2.54-4P 2M/78.7inch Female 4P to Male 4P Motor Extension Wire White Terminal Connector Cable for Voro 2.4 3D Printer Accessories
Asin: B098J4MM3G
Cable Length:2M/78.7Inch, High Quality And Durable, Lightweight For Portable Installation..
After Sales Guarantee: Each One Desfective Item Can Have The Free Replace Or Refund, Need More Help Please Feel Free To Email Or Qa Us, We Will Try Our Best To Serve You..
Package Includes: 2 X 2M Stepper Cables, Female 4 Pin To Male 4 Pin,Xh2.54..
Specially Designed For Vorn 2.4 3D Printer Stepper Motor, Extended Motor Cables, Convenient. Not Suitable For Other Kind Printers..
Features
- PTFE XH2.54 4 Pin to 4Pin stepping motor cable, Length 2m. For the momnet it's compatible with Voron2.4 3D printers Only, printing quality improved, high working stability, long time printing without interruption. Please double check your stock cable before ordering to avoid wrong buy.
- Specially designed for Vorn 2.4 3D printer stepper motor, extended motor cables, convenient. Not suitable for other kind printers.
- Cable length:2M/78.7inch, high quality and durable, lightweight for portable installation.
- Package includes: 2 x 2M stepper cables, Female 4 Pin to Male 4 Pin,XH2.54.
- After Sales Guarantee: each one desfective item can have the free replace or refund, need more help please feel free to email or QA us, we will try our best to serve you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #13
mankk 3D Printer X & Y & Z Endstop Accessory Cables Line for Ender 3 / Ender 3X / Ender 3 Pro/Ender 3 Prox CR-10 10S M-069-XYZ
Asin: B099ZPH6M6 | Model: CAA-M-069-XYZ | PartNumber: CAA-M-069-XYZ
【Cable Length】X： Axis:800Mm/31.5"，Y ：Axis:400Mm/15.7"，Z Axis:300Mm/11.8".
【Buy With Confidence 】For Your Best Choices,The Most Comfortable Goods Ever Have.If You Have Any Questions, Please Contact Us In Time And We Will Help You Solve Them..
【Type】Main Colour: Black; Material: Metal + Plastic.
【Design】One-Piece Plug Design, Easy To Install, Hard To Snap, Convenient To Plug Or Release.Suitable For 3D Printers.
Features
- Packaging includes 1 x X Axis Cable,1 x Y Axis Cable,1 x Z Axis Cable
- Design One-piece plug design, easy to install, hard to snap, convenient to plug or release.Suitable for 3D printers
- Cable length X Axis:800mm/31.5 Y Axis:400mm/15.7 Z Axis:300mm/11.8
- Type Main colour: black; Material: Metal + plastic
- Buy with confidence For your best choices,the most comfortable goods ever have.If you have any questions, please contact us in time and we will help you solve them.
- See more on Amazon...
Brand: mankk | Manufacturer: mankk
Dimensions: 1.00 x 6.00 x 5.00 inches
See On Amazon #14
FYSETC BL Touch Cable + Mounting Bracket: 2 Types BLtouc CRtouch Leveling Sensor Extension Wire Rack Mount Holder Fixed Part for Ender 3 Pro Ender 5 Pro CR-10 32-bit V4.2.2 V4.2.7 Motherboard
Asin: B0B1DJ98SM
2 Wires: One Works For 32 Bit V4.2.7 Motherboard, Another Works For 32 Bit V4.2.2, Must Use A Adapter Pin 27 Board(Asin: B07pr26ksd At Our Store) To Connect..
Genuine High Quality Set: Our Package Includes 1 Set Of Auto Bed Leveling Transfer Cable Kit. Simple, Smart And Easy To Install. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Easy To Install And Use: 2 Kinds Of Different Transfer Wires Allow For Installation On Different Control Boards Of Your Printers..
The Bracket Is Compatible With Ender 3, Ender 3S, Ender 5, Ender 5S, Cr10 3D Printer With 32 Bit V4.2.2 Or V4.2.7 Motherboard. Does Not Work For 8-Bit Motherboard, Please Clarify What Version Your Motherboard Is Before Buying..
Features
- This BL Touch transfer wire set includes 2pcs transfer wires + 1 bracket( it does not fit for Ender 3 V2/ Ender 3 Max). The length of the cables are about 1.5m/59inch, long enough to connect.
- The bracket is Compatible with Ender 3, Ender 3S, Ender 5, Ender 5S, CR10 3d printer with 32 bit V4.2.2 or V4.2.7 motherboard. Does not work for 8-bit motherboard, please clarify what version your motherboard is before buying.
- 2 Wires: one works for 32 bit V4.2.7 motherboard, another works for 32 bit V4.2.2, must use a adapter pin 27 board(Asin: B07PR26KSD at our store) to connect.
- Easy to Install and Use: 2 kinds of Different transfer wires allow for installation on different control boards of your printers.
- Genuine High Quality Set: Our package includes 1 set of auto bed Leveling transfer cable Kit. Simple, smart and easy to install. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #15
BIGTREETECH BL Touch V3.1 + 2 Types Extension Cables BLTouch V3.1 Auto Bed Leveling Sensor Kit for Ender 3/Ender 5/CR10 Series with 32 Bit V4.2.2/V4.2.7,SKR Mini E3 V3/Octopus/Manta Series Board
Asin: B08J9WN356 | Model: DKG000113+XPX000387+XPX000284 | PartNumber: DKG000113+XPX000387+XPX000284
⚡【Premium Leveling Kit】 There're 1 Set Of Bltouch Auto Bed Leveling Sensor Kit And 2 Types Extension Cables Included In The Package.（1.5M Extension For Cr10 Series，1M Extension Wire For Ender Series)..
⚡【For More Information】If You Want More Details About Bltouch And 2 Extension Cables, Please Check Out The Antclabs Github. If You Have Any Problems During Use, Please Contact Us At The First Time. We Will Give You A Satisfactory Solution..
⚡【Wide Application】 This Bltouch V3.1 Auto Bed Leveling Kits Are Compatible With 32-Bit V4.2.2 Creality, Btt Skr Mini E3 V3.0/Octopus/Manta/Skr 3/Ez/V1.4 Turbo, Kraken Series, Mks Gen L Board, Suitable For Ender 3, Ender 3 V2, Ender 3 Max, Ender 3 Pro, Ender 3S, Ender 5, Ender 5 Pro, Cr-10 Etc..3D Printers..
⚡【High Precision】 Bltouch’S Standard Deviation In Repeatability Is Around 0.005Mm. The 3D Printer Automatically Detects The Bed Surface, And Adjusts The Perfect Distance . Logic Voltage Free(Open Drain Output) Is 3.3V / 5V The Desired Output Logic Voltage Is Stored In The Eeprom Of The Probe And Can Be Selected By Commands..
Features
- High-performance Kit BL Touch V3.1 auto bed leveling senor is controlled by hall effect, providing high precision. Thus the bed material can be selected freely, glasses/ wood/ metal, etc. The stroke is up to 1.6mm longer than V2.0.
- High Precision BLTouch s Standard Deviation in repeatability is around 0.005mm. The 3D printer automatically detects the bed surface, and adjusts the perfect distance . Logic Voltage Free(Open Drain Output) is 3.3V / 5V The desired output logic voltage is stored in the EEPROM of the probe and can be selected by commands.
- Premium Leveling Kit There're 1 set of bltouch auto bed leveling sensor kit and 2 types extension cables included in the package. 1.5m extension for CR10 Series 1M extension wire for Ender series).
- Wide Application This Bltouch V3.1 auto bed leveling kits are compatible with 32-bit V4.2.2 Creality, BTT SKR MINI E3 V3.0/Octopus/Manta/SKR 3/EZ/V1.4 Turbo, Kraken Series, MKS Gen L board, suitable for Ender 3, Ender 3 V2, Ender 3 MAX, Ender 3 Pro, Ender 3S, Ender 5, Ender 5 Pro, CR-10 etc..3D Printers.
- For More Information If you want more details about BLTouch and 2 extension cables, please check out the antclabs github. If you have any problems during use, please contact us at the first time. We will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: ANTCLABS
See On Amazon #16
ENOMAKER BL Touch Cable and Mounting Bracket, BLTouch Leveling Sensor Wire Harness Replacement Rack Mount Holder Fixed Parts for Creality Ender 3, Ender-3 Pro, Ender3 V2, CR-10, Ender 5 Pro
Asin: B09J2BRFMV | Model: ENO-BL-Bracket | PartNumber: ENO-BL-Bracket | Ean: 0705300792159 | UPC: 705300792159
5 Pin Cable Is About 1.3M, The Split Cable Is About 1.5M..
After-Sales Services: If You Have Any Question During Usage, Please Free Free To Contact Us!.
Easy To Install,Easy To Install, With Wrench Included In The Package..
The Bracket Made Of High Quality Metal Material, High Strength, Durable And Wear-Resistant..
Features
- Compatible for Ender-3/Pro, Ender 3 V2, Ender 5/pro,CR-10.
- The bracket made of high quality metal material, high strength, durable and wear-resistant.
- 5 pin cable is about 1.3m, the split cable is about 1.5m.
- Easy to install,easy to install, with wrench included in the package.
- After-sales services: if you have any question during usage, please free free to contact us!
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #17
TecUnite 20 Pieces 3-Pin Extension Cable Cord Female to Male Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(4 Sizes)
Asin: B077HTYPWR | Model: TecUnite-Servo Extension-01 | PartNumber: TecUnite-Servo Extension-01 | Ean: 0615517138131 | UPC: 615517138131
3-Pin Servo Extension Wire: Each Servo Extension Has 3 Pieces Of 0.08Ts Wires, Universal Model; Connectors With 3 Pins And Have An Angle In Case You Will Install Incorrectly, Convenient For Use.
Package Includes: 20 Pieces Of Female To Male Servo Extension Cable Wires With 4 Different Lengths, Enough For You To Use On Different Occasions.
Female To Male Servo Extension Cable: Featured With Female Connector On One Side And Male Connector On The Other Side, Can Be Connected To The Receiving Set And Steering Engine.
Application: These Servo Extension Leads Are Compatible With Futaba And Jr Servo, Plane And Helicopter Servo Connection Or Receiver Connection, Remote Control Car, Rc Car.
Features
- Servo extension cord sizes: have 4 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch and 50 cm/ 19.7 inch, each length has 5 pieces servo extension cords
- Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car
- 3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model; Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use
- Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine
- Package includes: 20 pieces of female to male servo extension cable wires with 4 different lengths, enough for you to use on different occasions
- See more on Amazon...
Brand: TecUnite | Manufacturer: TecUnite
Dimensions: 1.50 x 8.11 x 4.21 inches | Weight: 0.18 Pounds
See On Amazon #18
Creality 3D Printer X Y Z Axis Stepper Motor and Limited Switch Endstop Cable for Ender 3 Ender 3 Pro (Pack of 3)
Asin: B07SYJQFKR | Ean: 0796862079062 | UPC: 796862079062
Suitable For Ender 3 Ender 3 Pro.
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #19
Creativity 3D Printer Parts Ender 3 Stepper Motor Cable X & Y & Z Axis Stepper Motor and Limited Switch Endstop Cable for Ender 3/ Ender 3 Pro/Ender 3X/ Ender 3S
Asin: B0BXL69MLM | Model: Limit Line | PartNumber: Limit Line | Ean: 8686254965924
【Cable Parameter】: X Axis: 900Mm，Y Axis: 500Mm，Z Axis: 300Mm..
【Commitment】: We Are Responsable For Our Every Product, If You Received Desfective Or Did Not Work Well, Please Feel Free To Contact Us, And We Will Reply To You Within 24 Hours..
【Easy To Use】:Limit Switch Connecting Cable Is Very Small And Light, With Three Limit Switches And Three Motor Cables, Very Convenient For You. Compatible With Ender 3 / Ender 3 Pro/Ender 3X Printer Limit Switch..
【Packaging Includes】: 1 X X Axis Cable,1 X Y Axis Cable,1 X Z Axis Cable..
Features
- High-quality Materials X Y Z Limit Switch Wire 3D Printer Accessories Cable is made of high quality material, One-piece plug design, easy to install, hard to snap, convenient to plug or release.
- Packaging Includes : 1 x X Axis Cable,1 x Y Axis Cable,1 x Z Axis Cable.
- Cable Parameter : X Axis: 900mm Y Axis: 500mm Z Axis: 300mm.
- Easy to Use :Limit switch connecting cable is very small and light, with three limit switches and three motor cables, very convenient for you. Compatible with ender 3 / ender 3 Pro/ender 3X printer limit switch.
- Commitment : We are responsable for our every product, if you received desfective or did not work well, please feel free to contact us, and we will reply to you within 24 hours.
- See more on Amazon...
Brand: Creativity | Manufacturer: Creativity
See On Amazon #20
HUAREW 3D Touch Probe Pin Replacement, Smart Auto Bed Leveling Push-Pin Needle Self Level Sensor Probe Tips for Bltouch, 3D Touch, CR Touch(Pack of 5 Pcs)
Asin: B09YNBKJ8R | Model: HR-3D PIN-5 | PartNumber: HR-3D PIN-5 | Ean: 0762917457321 | UPC: 762917457321
Simple Installation: Very Easy To Operate, Simple To Install And Use In Combination.
Package Includes: 5 Pcs Touch Sensor Pins.
Compatibility: Compatible For Bl Touch, 3D Touch, Cr Touch..
Quality Material: 3D Touch Probe Pin Made Of High-Quality And Safe Plastic Materials And Has A Long Service Life..
Features
- High precision, intelligent sensor, stable performance, high performance, intelligence.
- Quality material: 3D Touch Probe Pin made of high-quality and safe plastic materials and has a long service life.
- Simple installation: Very easy to operate, simple to install and use in combination
- Compatibility: Compatible for BL touch, 3D touch, CR touch.
- Package includes: 5 PCS touch sensor pins
- See more on Amazon...
Brand: HUAREW | Manufacturer: HUAREW
See On Amazon
Looking For Something Else?
Search