BCZAMD 3D Printer Heating Controller MKS MOSFET MOS Module for Heatbed Extruder Print Head Heat Bed Mosfet Module Exceed 30A
Asin: B07R292KXF | Model: AiUS Mos Red | PartNumber: AiUS Mos Red | Ean: 0793169739460 | UPC: 793169739460
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3.Digital Control Signals Can Be Connected To Gnd And D8 Directly..
5.The Two Sets Of Control Signals Can Only Be Connected To One Group..
4.Connect The Control Signal From The Ramps1.4 Or Mks Motherboard Mos Tube To Bed..
2.Hotbed Connected To The Hot Bed Heating Line, Pay Attention To Positive And Negative..
Features
- 1.Power is connected to the power supply, pay attention to positive and negative.
- 2.Hotbed connected to the hot bed heating line, pay attention to positive and negative.
- 3.Digital control signals can be connected to Gnd and D8 directly.
- 4.Connect the control signal from the Ramps1.4 or MKS motherboard MOS tube to Bed.
- 5.The two sets of control signals can only be connected to one group.
- See more on Amazon...
Brand: BCZAMD | Manufacturer: Aimengda
See On Amazon Similar To BCZAMD 3D Printer Heating Controller
#1
Imdinnogo BCZAMD 2Pcs 24V 50W Upgraded Ceramic Heater Cartridge Wire 2M/ 78.7 in 3D Printer Extruder Hotend Part Heating Tube 620mm Heat Control for Reprap A8 Make SelectV2 CR10 Ender Pro Heater Block
Asin: B09WCL83L8
Working Temperature: < 350 Degrees. Bigger Power And Have Longer, Much Stronger Cables, Heats Up Faster And Better Pid Temps..
Compared To Stock Red Heating Tube(40W), Pros 1.From The Original Ordinary 0.3-Line High-Temperature Line To 0.5-Line Thick White High-Temperature Line, Can Bear Higher Temperature..
Heating Head Material: 304 Stainless Steel;.
Features
- Great Upgrade Heater cartridge 24V 50W 2 Meters Cable for your printer hot end: Heating head size: 6 x 20mm;
- Heating head material: 304 stainless steel;
- Working Temperature: < 350 degrees. bigger power and have longer, much stronger cables, heats up faster and better PID temps.
- Compared to stock red heating tube(40W), Pros 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature.
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Aimengda
See On Amazon #2
BCZAMD 3D Printer Extruder Hotend Parts Ruby Volcan Nozzle 0.4mm High Output Temperature Nozzle-Filament 1.75mm x 0.40mm, 1pcs
Asin: B0894MSS98 | Model: AiUS-Ruby Volcano Nozzle 0.4mm | PartNumber: AiUS-Ruby Volcano Nozzle 0.4mm | Ean: 0738678972212 | UPC: 738678972212
A Torque Wrench Is Required During The Installation Of The Nozzle. The Nozzle Is Subjected To A Maximum Torque Of 5 N.M. Exceeding This Torque Will Damage The Brass Inlay. If You Don't Have A Torque Wrench. Then It Doesn't Matter. Don't Use Too Much Force During The Installation Process, Please Try To Control Your Strength..
Tips: The Nozzle Is Made Of Brass And Artificial High Imitation Hardness Ruby, The Cost Of Natural Ruby Is Very Expensive. This Is Not What This Price Can Afford. All Industrial Gemstones Are Artificially Synthesized. If You Mind This, Please Think More Before Ordering..
Please Kindly Tips: Brass Material Can Not Be Screwed Too Hard.Because Of The Technical Limited, The Thickness Of The Brass Wall Of The Gem Inlaid Is Only 1Mm. If You Use A Lot Of Force To Twist The Nozzle, It May Be Broken. The Nozzle Should Be Loaded And Unloaded Under Heating Of The Nozzle. Do Not Use Too Large..
Compatible With Expecially Good For The Carbon Fiber Nylon And It Laid Down Nicely. Switching Is Easy. Just Heat The Nozzle To Abs Temps To Switch Back To Pla..
Features
- Upgrade Nozzle for your V6 Volcao Hotend. Yes, it's expensive. But once you've used it you won't go back. Layer precision is noticeably improved and it won't wear out regardless of what filament you are using.
- Compatible with Expecially good for the carbon fiber nylon and it laid down nicely. Switching is easy. Just heat the nozzle to ABS temps to switch back to PLA.
- A torque wrench is required during the installation of the nozzle. The nozzle is subjected to a maximum torque of 5 N.m. Exceeding this torque will damage the brass inlay. If you don't have a torque wrench. Then it doesn't matter. Don't use too much force during the installation process, please try to control your strength.
- Please kindly tips: Brass material can not be screwed too hard.Because of the technical limited, The thickness of the brass wall of the gem inlaid is only 1mm. If you use a lot of force to twist the nozzle, it may be broken. The nozzle should be loaded and unloaded under heating Of the nozzle. Do not use too large.
- Tips: The nozzle is made of brass and Artificial high imitation hardness ruby, The cost of natural ruby is very expensive. This is not what this price can afford. All industrial gemstones are artificially synthesized. If you mind this, please think more before ordering.
- See more on Amazon...
Brand: BCZAMD | Manufacturer: Aimengda
See On Amazon #3
Imdinnogo Soldering Iron with Thermostatic Digital-Controlled LCD Screen Display 110V60W Temperature Adjustable 180 /356 -500 /932 1.5M Wire: for 3D Printer Trimming - Finishing Prints Bczamd
Asin: B0CC47992P
3. Handle Is Made Of Double-Layer Insulated Silicone, Insulated And Comfortable, Non-Slip And Anti-Scalding. The Soldering Iron Is Not Easy To Rust, Corrosion Resistance And Durability.
5. Compare To Other Companies With No Display, Knob To Add Or Subtract Temperature, The Advantage Of Our Company's Products Is Obvious. We Are All Concerned About Whether The Temperature Is Controllable Or Not, Whether The Heating Up Is Fast Or Not, And Whether It Is Durable Or Not, But Our Company's Answer Is Yes To All Of Them..
4. Quick Button, Flexible Temperature Control, Intelligent Display, Temperature Control At A Glance, ℃ And °F Can Be Switched Between Two Modes.
2. Adopts New Ceramic Heating Core, Directly Inserted Into The Soldering Iron Head, Faster Heat Up, Less Temperature Loss, Higher Internal Temperature For The Same Wattage. At The Same Time, The Internal Heating Element Is More Durable, Smaller Heater Size, Smaller Size Of Internal Heating Iron, Easy To Operate.
Features
- 1. Power: 110v60w - Min Temp:180 /356 F - Max TemP: 500 /932 F
- 2. Adopts new ceramic heating core, Directly inserted into the soldering iron head, Faster heat up, less temperature loss, Higher internal temperature for the same wattage. At the same time, the internal heating element is more durable, Smaller heater size, Smaller size of internal heating iron, Easy to operate
- 3. Handle is made of double-layer insulated silicone, insulated and comfortable, non-slip and anti-scalding. The soldering iron is not easy to rust, corrosion resistance and durability
- 4. Quick button, flexible temperature control, intelligent display, temperature control at a glance, and F can be switched between two modes
- 5. Compare to other companies with no display, knob to add or subtract temperature, the advantage of our company's products is obvious. We are all concerned about whether the temperature is controllable or not, whether the heating up is fast or not, and whether it is durable or not, but our company's answer is yes to all of them.
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Aimengda
Dimensions: 1.77 x 9.25 x 2.95 inches | Weight: 0.31 Pounds
See On Amazon #4
3D Printer Heating Controller for Mos Board for Printhead for Heated Bed Extruder 3D Printer Controllers
Asin: B0CZG97H7Y | Model: ZIZEVd4t8seczuf | PartNumber: ZIZEVd4t8seczuf
Work: The Ensures Working Performance, Meanwhile The Firm Connection Promise Stable Output..
'Printer Controller, This Product Includes A Printer Controller And A Hot Bed Controller, Which Can Effectively The Temperature Of The Printer's Bed And Print Head And For Ensure The Printing Effect', 'Comprehensive Printer Components, In Addition To Controller, Our Products Also Include Modules, Extruders And Other Necessary Accessories For Printers, And The Lifespan Of All Modules Exceeds The Market Average, Ensuring The Stable Operation Of The Printer'.
Fácil Instalar: Viene Con Peso Ligero Y Tamaño Compacto, Instalación Puede Terminar Rápidamente..
Mejor Diseño: Equipado Con Disipador Calor, El Controlador Calefacción Impresora For 3D Permite Corriente Máxima Hasta 30 A..
Features
- Buena Coincidencia: capaz proceder al mediante el uso se al salida cama calentada Ramp1.4 y serie, r pida y confiable.
- Mejor Dise o: equipado con disipador calor, el controlador calefacci n impresora for 3d permite corriente m xima hasta 30 A.
- Work: The ensures working performance, meanwhile the firm connection promise stable output.
- F cil Instalar: viene con peso ligero y tama o compacto, instalaci n puede terminar r pidamente.
- 'Printer controller, this product includes a printer controller and a hot bed controller, which can effectively the temperature of the printer's bed and print head and for ensure the printing effect', 'Comprehensive printer components, in addition to Controller, our products also include modules, extruders and other necessary accessories for printers, and the lifespan of all modules exceeds the market average, ensuring the stable operation of the printer'
- See more on Amazon...
Brand: ZIZEV | Manufacturer: ZIZEV
See On Amazon #5
3D Printer Heating Controller, Extruder Heating Controller Heatbed Extruder Print Head Heat Bed Module MKS MOSFET MOS Control Module Board 30A for Hotbed Extruder
Asin: B0CWF3QKXN
Good Matching: Extruder Heating Controller Is Able To Proceed Control By Using The Heated Bed Output Sign Of Ramp1.4 And Series, Quick And Reliable..
Satisfaction Guarantee: All Our Product Offer Return Policy Or Money Back Guarantee, If You Have Any Problem About Your Purchase, Pls Communicate With Us By Email, We Are Always Here To Make Everything Right For You..
Better Design: Extruder Heating Controller Heatbed Is Equipped With Large Heat Sink, The 3D Printer Heating Controller Enables A Maximum Current Up To 30A..
Reliable Work: The Mosfet Ensures Excellent Working Performance, Meanwhile The Firm Connection Promise Stable Output, Comes With A Light Weight And A Compact Size As Well, The Simple Installation Can Be Quickly Finished...
Features
- SMART CONTROL: 3D printer heating controller can control the hearing of 3D printer extruder, hotbed, print head, etc. through 5 24V digital sign, connected to the power supply, pay attention to positive and negative.
- RELIABLE WORK: The MOSFET ensures excellent working performance, meanwhile the firm connection promise stable output, comes with a light weight and a compact size as well, the simple installation can be quickly finished..
- GOOD MATCHING: Extruder heating controller is able to proceed control by using the heated bed output sign of Ramp1.4 and series, quick and reliable.
- BETTER DESIGN: Extruder heating controller heatbed is equipped with large heat sink, the 3D printer heating controller enables a maximum current up to 30A.
- SATISFACTION GUARANTEE: All our product offer return policy or money back guarantee, if you have any problem about your purchase, pls communicate with us by Email, we are always here to make everything right for you.
- See more on Amazon...
Brand: Agatige | Manufacturer: Agatige
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.29 Pounds
See On Amazon
Looking For Something Else?
Search