TIHOOD Fishing Pole Holder, Blue, Adjustable, Lightweight, EVA Foam Padding, 10.6 in x 5.1 in
Asin: B07RRBGTX8 | Ean: 0741663635436 | UPC: 741663635436
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Safety And Comfort: With Eva Foam Pad Which Thickness Is Approximately 0.4 Inch,Makes You Comfortable And Protects Your Abdomen,Padding Backing Providing Less Strain When Fighting A Fish,Adjustable Belt With Plastic Buckle,Fits 27.5 Inch To 44 Inch Waist,Strong Enough.
Great Accessory For Boat Fishing And Rock Fishing, Making You Fully Enjoy The Pleasure Of Fishing,Perfect For Gifts Of Mother's Or Father's Day.
Easy To Control: 90 Degree Adjustable Spinning Deep Rod Holder Assure Positive Grip Of Rod And Flexible Control Of The Rod.
Dimension: 10.6 * 5.1 Inch Thick Foam Pad Providing Less Strain,The Diameter Of Holder Is About 1.4 Inch, So The Diameter Of Your Fishing Rod Must Smaller Than 1.4 Inch.
Features
- Durable and Lightweight:made of ABS plastic,with comfortable EVA foam padding,anti-corrosive
- Dimension: 10.6 * 5.1 inch thick foam pad providing less strain,the diameter of holder is about 1.4 inch, so the diameter of your fishing rod must smaller than 1.4 inch
- Safety and Comfort: with EVA foam pad which thickness is approximately 0.4 inch,makes you comfortable and protects your abdomen,Padding backing providing less strain when fighting a fish,adjustable belt with plastic buckle,fits 27.5 inch to 44 inch waist,strong enough
- Easy to control: 90 degree adjustable spinning deep rod holder assure positive grip of rod and flexible control of the rod
- Great accessory for boat fishing and rock fishing, making you fully enjoy the pleasure of fishing,perfect for gifts of Mother's or Father's Day
- See more on Amazon...
Brand: TIHOOD | Manufacturer: TIHOOD
Weight: 0.60 pounds
See On Amazon Similar To TIHOOD Fishing Pole Holder Blue
#1
PLUSINNO 2 Pack Fishing Rod Holders for Boat, Upgraded Fishing Rod Holder with Enlarge Clamp, Innovative Dual-V Shaped Design, Fit Round/Square Tube Boat Fishing, Fishing Gear, Fishing Gifts for Men
Asin: B0CTQ6WKDW | Model: MD-2PACK-FHB02-NEW | PartNumber: MD-2PACK-FHB02-NEW
ăStrap To Secure Your Rodă-No More Fear Of Dropping Fishing Rods! Plusinno Fishing Rod Holder Adopts A Creative Rod Protective Strap, Perfectly Solving The Problem Of The Fishing Rod Being Bitten By Fish Then Accidentally Dropping, Ensuring That The Rod And Reel Are Securely Fixed On Your Boat Rod Holders, Preventing Your Expensive Fishing Rod From Slipping And Getting Damaged. The Rod Protective Strap Can Quick Release And Locks Easily. Fishing Gear Pole Holders Are Best Fishing Gifts For Men..
ăSuperior Quality And Durabilityă-The Primary Structure Of The Rod Holders For Boat Is Crafted Using Aluminum Alloy Die-Casting Technology, Ensuring Strength, Corrosion Resistance, And Extended Longevity. The Inclusion Of Marine-Grade, Corrosion-Resistant Stainless Steel Screws And Flexible Locking Adjustment Knobs Enable Swift And Efficient Installation. Our Fishing Rod Holder Is Highly Suitable For Most Anglers, Fishing Gear Pole Holders Are The Best Fishing Gifts For Men..
ăEffortless To Useă-This Exceptional Fishing Rod Holders Offers Both Vertical And Horizontal 360° Rotation, Along With 10°Micro-Adjustments At Multiple Angles. Simply Position Your Fishing Rod Perfectly, Then Patiently Wait For The Perfect Catch. Installation Is Tool-Free And Won't Damage Your Boat, Ensuring Endless Enjoyment During Your Fishing Adventures. This Is A Perfect Fishing Gear And Equipment Suitable For Most Fishing Scenarios. Note: Not Recommended For Trolling Fishing..
ăRod Holder For Most Boat Scenariosă-This Versatile Fishing Rod Holders For Boat Features A Creative Design That Perfectly Fits Round Tubes, Square Tubes, Flat Surfaces, And Some Irregular Objects. The Expandable Clamp Range Is 0.59â/1.5 Cm To 3.94â/10 Cm, Making It Suitable For Most Boats And Railings For Fishing, Allowing You To Start Fishing Anytime And Anywhere. This Is Plusinno's Major Breakthrough In The High-Compatibility Effective Design Of Rod Holder For Boat..
Features
- Pioneering Stable Design - PLUSINNO rod holders for fishing boat adopts innovative double V-shaped thread and anti-slip silicone design, providing a larger contact area. It generates 4 contact points at all times for higher stability. The silicone pad ensures a firm grip on boat without wobbling, and it won't cause any scratches to the boat. The brand new fishing pole holders secures your rod firmly, enabling you to focus entirely on battling the fish. Essential fishing gear for boat fishing.
- Rod Holder for Most Boat Scenarios -This versatile fishing rod holders for boat features a creative design that perfectly fits round tubes, square tubes, flat surfaces, and some irregular objects. The expandable clamp range is 0.59 /1.5 cm to 3.94 /10 cm, making it suitable for most boats and railings for fishing, allowing you to start fishing anytime and anywhere. This is PLUSINNO's major breakthrough in the high-compatibility effective design of rod holder for boat.
- Strap to Secure your Rod -No more fear of dropping fishing rods! PLUSINNO fishing rod holder adopts a creative rod protective strap, perfectly solving the problem of the fishing rod being bitten by fish then accidentally dropping, ensuring that the rod and reel are securely fixed on your boat rod holders, preventing your expensive fishing rod from slipping and getting damaged. The rod protective strap can quick release and locks easily. Fishing gear pole holders are best fishing gifts for men.
- Effortless to Use -This exceptional fishing rod holders offers both vertical and horizontal 360 rotation, along with 10 micro-adjustments at multiple angles. Simply position your fishing rod perfectly, then patiently wait for the perfect catch. Installation is tool-free and won't damage your boat, ensuring endless enjoyment during your fishing adventures. This is a perfect fishing gear and equipment suitable for most fishing scenarios. Note: not recommended for trolling fishing.
- Superior Quality and Durability -The primary structure of the rod holders for boat is crafted using aluminum alloy die-casting technology, ensuring strength, corrosion resistance, and extended longevity. The inclusion of marine-grade, corrosion-resistant stainless steel screws and flexible locking adjustment knobs enable swift and efficient installation. Our fishing rod holder is highly suitable for most anglers, fishing gear pole holders are the best fishing gifts for men.
- See more on Amazon...
Brand: PLUSINNO | Manufacturer: PLUSINNO
Warranty: 1 Year
See On Amazon #2
PLUSINNO Fishing Rod Holders for Bank Fishing - Upgraded Fishing Pole Holders for Ground, Beach, 360 Degree Adjustable Fishing Pole Stand Equipment, Gift for Men Father s Day, Birthday Day
Asin: B0BTBDY2G8 | Model: 2 Pack Red and Black Fishing Rods Holder | PartNumber: 2 Pack Red and Black Fishing Rods Holder
ăRod Protectionă-The Last Thing You Want At The End Of The Fishing Is To Realize That Your Fishing Pole Holders Have Destroyed The Finish On Your Rod Or Damaged The Handle. Our Rod Holders For Bank Fishing Solve Your Concerns For You! There Is A U-Shape Rubber Provided On The Rear End, With A Non-Slip Cushion In The Middle. They Provide Excellent Protection For The Fishing Rod While Preventing Slipping!.
ăFit Most Rodsă-A Good Rod Holder Is An Ideal Accessory For Bank Fishing. Plusinno Surf Fishing Rod Holder Can Be Suitable For All Types Of Fishing Rods Like Spinning And Casting Rods, Etc. It's An Ideal Choice As A Gift For Your Father, Husband, Boyfriend, Or Grandson On Birthday, Father's Day, Christmas..
ăEasy To Carryă-The Detachable Design Of The Fishing Pole Holders For Ground Is Very Portable And Convenient, You Can Take It Out Fishing Anytime And Anywhere! It Plus Equipped With Soft Rubber Heads To Protect You And Your Bag From Sharp Stabbing Effectively..
ă360° Omni-Directional Designă-The Head Of The Fishing Pole Stand Allows 360-Degree Rotation On The Horizontal Axis And 130-Degree Rotation On The Vertical Axis. A Set Screw ThatâS Easy To Turn By Hand Locks It Into Position And Not Easy To Loosen. You Can Find A Good Spot, Drive Two Rod Holders, And Adjust Any Different Angle That Is Needed When Fishing By The Sea, River, Or Lake. You Won't Miss Your Big Fish!.
Features
- UPGRADED MATERIAL -The bank fishing rod holder is made of Reinforced Nylon, which has high hardness and high toughness, is durable, and never rusts! And the tapered shape drill rod is added with Rust-Proof Chrome Coating for rust prevention, plus lengthened and thickened, which can easily go into the ground(mud, sand, rock cracks).
- 360 OMNI-DIRECTIONAL DESIGN -The head of the fishing pole stand allows 360-degree rotation on the horizontal axis and 130-degree rotation on the vertical axis. A set screw that s easy to turn by hand locks it into position and not easy to loosen. You can find a good spot, drive two rod holders, and adjust any different angle that is needed when fishing by the sea, river, or lake. You won't miss your big fish!
- ROD PROTECTION -The last thing you want at the end of the fishing is to realize that your fishing pole holders have destroyed the finish on your rod or damaged the handle. Our rod holders for bank fishing solve your concerns for you! There is a U-shape rubber provided on the rear end, with a Non-slip cushion in the middle. They provide excellent protection for the fishing rod while preventing slipping!
- EASY TO CARRY -The detachable design of the fishing pole holders for ground is very portable and convenient, you can take it out fishing anytime and anywhere! It plus equipped with soft rubber heads to protect you and your bag from sharp stabbing effectively.
- FIT MOST RODS -A good rod holder is an ideal accessory for bank fishing. PLUSINNO surf fishing rod holder can be suitable for all types of fishing rods like spinning and casting rods, etc. It's an ideal choice as a gift for your father, husband, boyfriend, or grandson on Birthday, Father's Day, Christmas.
- See more on Amazon...
Brand: PLUSINNO | Manufacturer: PLUSINNO
See On Amazon #3
KastKing V16 Fishing Rod Rack With Rotating Base- Fishing Pole Rack Holds Up to 16 Fishing Rods or Combos, Lightweight and Durable ABS Construction, Space-Saving Fishing Rod Holders for Garage
Asin: B0CP3MF3P7
Durable Abs Construction With Protective Foam Inserts - Made From Lightweight And Durable Abs Material, Ensuring Long-Lasting Performance, While Soft Foam Inserts Securely Hold The Combos In The Rod Rack Without Damaging The Finish On Your Fishing Rods..
Quick & Easy Assembly - Assembling The V16 Fishing Rod Rack With Rotating Base Is A Breeze, Taking Just A Few Minutes And Requiring No Tools..
Multi-Purpose Storage - Includes Designated Storage Space For Fishing Line Spools, Pliers, Scissors, Knives, Baits, Terminal Tackle, And Other Fishing Gear..
Staggered Reel Height - Two Lower Shelves With Different Heights Allow For Comfortable Installation And Removal Of Combos From The V16 Fishing Rod Holder With Rotating Base..
Features
- Space-Saving Design - The V16 Rod Rack with rotating base holds up to 16 fishing combos or rods in less than the space of one tile (1.5 sq. ft.), maximizing storage efficiency. The rotating base design allows you to easily select the rod and reel combo you need for your fishing excursion.
- Staggered Reel Height - Two lower shelves with different heights allow for comfortable installation and removal of combos from the V16 Fishing Rod Holder with rotating base.
- Durable ABS Construction With Protective Foam Inserts - Made from lightweight and durable ABS material, ensuring long-lasting performance, while soft foam inserts securely hold the combos in the rod rack without damaging the finish on your fishing rods.
- Multi-Purpose Storage - Includes designated storage space for fishing line spools, pliers, scissors, knives, baits, terminal tackle, and other fishing gear.
- Quick & Easy Assembly - Assembling the V16 fishing rod rack with rotating base is a breeze, taking just a few minutes and requiring no tools.
- See more on Amazon...
First Available: 02/23/2024
Brand: KastKing | Manufacturer: KastKing
Dimensions: 32.00 x 12.50 x 12.50 inches | Weight: 1.80 Kilograms
See On Amazon #4
2 Pack-Dzmaker Upgraded Rod Pole Holders for Bank Fishing Fishing Rod Holder Ground 360 Degree Adjustable Folding Catfishing Equipment
Asin: B086XHJBHK | Ean: 0759337627229 | UPC: 759337627229
Universal Fit: The Large Fishing Rod Holder Can Be Suitable For All Types Of Fishing Pole Like Spinning And Casting Rod. The Upgraded Fishing Rod Holder Has A Bigger Size, Makes The Fishing Poles More Stable..
Notes: If The Rod Holders For Bank Fishing Did Not Work For You, Or You DonâT Like It Very Much, Please Go Ahead To Contact Amazon For A Refund..
Well Made And Portable: The Tapered Shape Drill Rod Made Of Stainless Steel Is Lengthened And Thickened, Can Easily Go Into Ground (Mud, Sand, Rock Cracks).So The Bank Fishing Holder Can Stand In Ground Sturdy. The Detachable Design Of The Fishing Pole Holder Is Easy To Carry And Storage. It Is Perfect As Fathers Day Gifts For Dad And It Is Perfect As Fishing Gifts For Men..
360° Omni-Directional Design: The Head Of Fishing Rod Holder Can Rotate 360 Degrees Horizontally And The Fishing Rod Holder Can Rotate 130 Degrees VerticallyïŒAnd The Nut Keeps It Firm And Not Easy To Loosen As Fishing Equipment. The Rod Holders For Bank Fishing Can Adjust Any Different Angle That Needed When Fishing By The Sea, River Or Lake..
Features
- UPGRADED MATERIAL :The bank fishing rod holder is made of Reinforced Nylon that is durable and never rust, more friendly to fishing rods.Reinforced Nylon has high hardness and high toughness, won t damage the fishing rods.
- 360 OMNI-DIRECTIONAL DESIGN: The head of fishing rod holder can rotate 360 degrees horizontally and the fishing rod holder can rotate 130 degrees vertically and the nut keeps it firm and not easy to loosen as fishing equipment. The rod holders for bank fishing can adjust any different angle that needed when fishing by the sea, river or lake.
- UNIVERSAL FIT: The large fishing rod holder can be suitable for all types of fishing pole like spinning and casting rod. The upgraded fishing rod holder has a bigger size, makes the fishing poles more stable.
- WELL MADE and PORTABLE: The tapered shape drill rod made of stainless steel is lengthened and thickened, can easily go into ground (mud, sand, rock cracks).So the bank fishing holder can stand in ground sturdy. The detachable design of the fishing pole holder is easy to carry and storage. It is perfect as fathers day gifts for dad and it is perfect as fishing gifts for men.
- NOTES: If the rod holders for bank fishing did not work for you, or you don t like it very much, please go ahead to contact amazon for a refund.
- See more on Amazon...
Brand: DZrudun | Manufacturer: Dzmaker
Dimensions: 2.00 x 15.40 x 6.50 inches
See On Amazon #5
Redneck Convent Fishing Rod Holder - Fishing Gear Pole Holder for 16 Rod and Reel Combos - Vertical Fishing Rod Rack Floor Storage
Asin: B0744YYXD3 | Model: 9688 | PartNumber: 9688 | Ean: 0688295879688 | UPC: 688295879688
[Light Assembly Required]: Easy To Follow Instructions And Diagrams; All Hardware Is Included, Phillips Head Screwdriver Required.
[Trusted Quality]: 2 Handles For Easy Carrying And Transportation; Decorative Fish Design On Both Sides Of Frame; Black And Gray Durable Plastic Construction.
[Fits Your Equipment]: 17.5 X 8 X 32 Inch (45X20x81cm) Overall To Hold 8 Rods Or Combos On Either Side (16 Total); 1.5In (3.8Cm) Diameter Holders Universal For Rod Types And Combos, Trekking Poles, Fishing Spears.
[Safe Storage]: Enjoy Peace Of Mind That Comes With Storing Your Rods And Reels Vertically Saving Yourself From Wasting Time Untangling Line, Or Repairing Snapped Poles.
Features
- [Be Prepared]: No matter what is biting at the lake, be able to quickly locate the correct rod and reel with the Redneck Convent Fishing Pole Rack
- [Safe Storage]: Enjoy peace of mind that comes with storing your rods and reels vertically saving yourself from wasting time untangling line, or repairing snapped poles
- [Light Assembly Required]: Easy to follow instructions and diagrams; All hardware is included, Phillips head screwdriver required
- [Fits Your Equipment]: 17.5 x 8 x 32 inch (45x20x81cm) overall to hold 8 rods or combos on either side (16 total); 1.5in (3.8cm) diameter holders universal for rod types and combos, trekking poles, fishing spears
- [Trusted Quality]: 2 handles for easy carrying and transportation; Decorative fish design on both sides of frame; Black and gray durable plastic construction
- See more on Amazon...
Brand: Redneck Convent | Manufacturer: Redneck Convent
Dimensions: 4.20 x 17.50 x 10.10 inches | Weight: 4.74 pounds
See On Amazon #6
PLUSINNO V9 Vertical Fishing Rod Holders, Wall Mounted Fishing Pole Holders, Fishing Rod Rack Holds Up to 9 Rods or Combos, Fishing Rod Holders for Garage, Fits Most Rods of Diameter 3-19mm
Asin: B0BVHHNMKY | Model: fishing rod holder | PartNumber: fishing rod holder
Innovative Patented Grip Design - New Release Of Orange Version - Plusinno V9 Fishing Rod Holders. This Fishing Rod Rack Features A Novel Design That Utilizes The Principle Of An Off-Centered Circle. The Arc-Shaped Grip Roller Is Specially Calibrated To Securely Hold Fishing Rods With A Wide Range Of Diameters, Ensuring That Each Rod Is Held Firmly In Place. Plus, The Sturdy Construction Of This Fishing Pole Rack Shields Your Valuable Gear From Potential Damage, Providing Long-Lasting Use..
Easy To Install And Use - Just 4 Steps Are Required To Get Fully Installed Fishing Rod Holders For Garage. Please Be Careful If You're Squeezing In Lightweight Rods As The Holder Grips Are Sprung Pretty Tight. Just Using A Finger To Assist If You Worry About Snapping A Lightweight Rod. To Provide You With A Reliable And Easy Way To Store Fishing Poles, Plusinno Fishing Pole Holders Take Up Much Less Space Than Traditional Rod Holders, Making Them Perfect Fishing Gifts For Men And Any Anglers!.
Sturdy And Soft Material - The Plusinno V9 Fishing Rod Rack Is Crafted From A Robust Polymer Material, Sustained And Sturdy In Texture, And Resistant To Bend, Deform Or Break. This Fishing Rod Holder Is Capable Of Supporting Over 3 Lbs Of Fishing Rod And Reel Combos, Providing A Firm Hold That Prevents Damage To The Poles. The Added Bonus Is The Soft Silicone Grips Pads Featuring A Unique Textured Design Of Raised Dots And Grooves That Securely Hold Rods And Combos In Place..
Store 9 Rods Or Combos - The V9 Vertical Fishing Rod Holders Is Able To Fit 9 Rods Neatly And Securely In Less Than 16 Inches Of Horizontal Wall Space. Other Brands Only Can Store 3 Or 6 Combos In The Same Space. The Clamping Design Allows You To Stagger Rod Heights In The Fishing Rod Rack So That Any Installed Reels Don't Get In The Way Of Each Other To Minimize Storage Space. This Fishing Pole Holders Is A Reliable Storage Solution For Anglers Seeking Efficient Storage For Their Fishing Gear..
Features
- FITS MOST RODS OR COMBOS - The PLUSINNO V9 fishing rod holders can store fishing rods or combos of diameter 0.12"-0.75" (3-19mm), which can provide a practical storage solution for fishing enthusiasts to store different types of rods, such as telescopic fishing rods, spinning and casting fishing rods, ice fishing rods, etc. Most other brands are only applicable for rods diameter 0.28''-0.47'' (7-12mm). You can use space efficiently and reduce clutter in your garage by using PLUSINNO V9 fishing rod rack.
- STORE 9 RODS OR COMBOS - The V9 vertical fishing rod holders is able to fit 9 rods neatly and securely in less than 16 inches of horizontal wall space. Other brands only can store 3 or 6 combos in the same space. The clamping design allows you to stagger rod heights in the fishing rod rack so that any installed reels don't get in the way of each other to minimize storage space. This fishing pole holders is a reliable storage solution for anglers seeking efficient storage for their fishing gear.
- INNOVATIVE PATENTED GRIP DESIGN - New release of orange version - PLUSINNO V9 Fishing Rod Holders. This fishing rod rack features a novel design that utilizes the principle of an off-centered circle. The arc-shaped grip roller is specially calibrated to securely hold fishing rods with a wide range of diameters, ensuring that each rod is held firmly in place. Plus, the sturdy construction of this fishing pole rack shields your valuable gear from potential damage, providing long-lasting use.
- STURDY AND SOFT MATERIAL - The PLUSINNO V9 fishing rod rack is crafted from a robust polymer material, sustained and sturdy in texture, and resistant to bend, deform or break. This fishing rod holder is capable of supporting over 3 lbs of fishing rod and reel combos, providing a firm hold that prevents damage to the poles. The added bonus is the soft silicone grips pads featuring a unique textured design of raised dots and grooves that securely hold rods and combos in place.
- EASY TO INSTALL AND USE - Just 4 steps are required to get fully installed fishing rod holders for garage. Please be careful if you're squeezing in lightweight rods as the holder grips are sprung pretty tight. Just using a finger to assist if you worry about snapping a lightweight rod. To provide you with a reliable and easy way to store fishing poles, PLUSINNO fishing pole holders take up much less space than traditional rod holders, making them perfect fishing gifts for men and any anglers!
- See more on Amazon...
Brand: PLUSINNO | Manufacturer: PLUSINNO
Dimensions: 2.00 x 16.00 x 1.60 inches
See On Amazon #7
E-jades Fishing Rod Holders for Bank Fishing, Fishing Pole Holders for Ground, Bank Fishing Rod Rack Stand,Fish Pole Holder for Beach, Gifts for Men Birthday Day,360 Degree Adjustable-2 Pack
Asin: B0BH9MCT37 | Model: bank fishing rod holders | PartNumber: bank fishing rod holders | Ean: 0768745590360 | UPC: 768745590360
Brand: e-jades | Manufacturer: bank fishing rod holders
Warranty: 5 Years
See On Amazon #8
ASOCEA Fishing Fighting Waist Belt 2.3 Inch Inner Dia Offshore Tackle Boat Fishing Rod Holder
Asin: B0752BRHFJ
Fishing Rod Lock: The Gimbals With Stainless Steel Insert Pin Keeps Rod Butt Locked In Place And Makes It Easy To Fight Fish While Standing. Keep Your Fishing Rod Locked And Secured When Fighting With Fish..
Adjustable Size: Dimension Is 9.5 X 4.5In. Foam Pad Thickness Is 0.3In. The Adjustable Waist Range Is 27.5 -47 In. Holder Hole Inner Dia Is 2.3In Which Fits Most Fishing Rod Head. Great For Boat Fishing And Rock Fishing, Making You Fully Enjoy The Pleasure Of Fishing..
Easy To Operate: Fishing Belly Belt With A Safety Quick Release Buckle, Easy To Take On/Off. Deep Rod Holder Assures A Positive Grip Of Rod And Flexible Control Of The Rod. The Tightness Waist Belt Can Be Adjusted Waistline According To Your Own Needs..
Fishing Waist Belt: The Waist-Protecting Part Of The Fishing Belt Is Made Of Abs Plastic, Impact-Resistant, Anti-Corrosion, Strong, And Lightweight. When Fighting A Fish Foam Pad Helps You Protect Yourself And Your Fishing Rods..
Features
- FIGHTING WITH BIG FISH: This fishing rod holder is vertically rotation for easy movement. Thickened sponge pad on back evenly distributes pressure resulting from the fight with the fish make fishing easier.
- FISHING WAIST BELT: The waist-protecting part of the fishing belt is made of ABS plastic, impact-resistant, anti-corrosion, strong, and lightweight. When fighting a fish foam pad helps you protect yourself and your fishing rods.
- FISHING ROD LOCK: The gimbals with stainless steel insert pin keeps rod butt locked in place and makes it easy to fight fish while standing. Keep your fishing rod locked and secured when fighting with fish.
- EASY TO OPERATE: Fishing belly belt with a safety quick release buckle, easy to take on/off. Deep rod holder assures a positive grip of rod and flexible control of the rod. The tightness waist belt can be adjusted waistline according to your own needs.
- ADJUSTABLE SIZE: Dimension is 9.5 x 4.5in. Foam pad thickness is 0.3in. The adjustable waist range is 27.5 -47 in. Holder hole inner dia is 2.3in which fits most fishing rod head. Great for boat fishing and rock fishing, making you fully enjoy the pleasure of fishing.
- See more on Amazon...
Brand: ASOCEA | Manufacturer: ASOCEA
Weight: 0.61 pounds
See On Amazon #9
Hifisher Upgraded Fishing Rod Holders for Bank Fishing, 2 Pack Tall Fishing Pole Holders for Ground, Beach, 360 Degree Adjustable Fixed, Fishing Pole Stand Equipment
Asin: B0C7N6752B | Model: 28-0002 | PartNumber: 28-0002 | Ean: 0727210924604 | UPC: 727210924604
ăUpgraded FeaturesăThe Head Of The Fishing Pole Stand Allows 360-Degree Rotation On The Horizontal Axis And 180-Degree Rotation On The Vertical Axis.You Can Adjust And Fix Any Angle According To Your Needs When Fishing By The Sea, River, Or Lake, Freedom Your Hands, The Necessary Fishing Equipmentă.
ăBest GiftsăThe Rod Holders For Bank Fishing Is An Ideal Choice As A Gift For Your Father, Husband, Boyfriend, Or Grandson On Birthday, Father's Day, Christmas..
ăExtensive Useă The Fishing Rod Holder Can Be Suitable For Almost All Sizes And Types Of Fishing Pole Like Spinning And Casting RodïŒEtc.The Detachable Design Of The Fishing Pole Holder Is Easy To Carry And Storage.
ăPremium MaterialăThe Upgraded Fishing Pole Holders For Ground Is Made Of Reinforced Nylon, Smooth Surface For Easier Cleaning. And The Tapered Shape Drill Rod Is Added With Rust-Proof Chrome Coating For Rust Prevention, Extra Lengthened, Which Can Easily Go Into The Ground(Mud, Sand, Rock Cracks)..
Features
- This is the extra-long, any angle adjustable fixed high quality bank fishing rod holder you're looking for. Yes, it's exactly the fishing accessories you want!
- PREMIUM MATERIAL The upgraded fishing pole holders for ground is made of Reinforced Nylon, Smooth surface for easier cleaning. And the tapered shape drill rod is added with Rust-Proof Chrome Coating for rust prevention, extra lengthened, which can easily go into the ground(mud, sand, rock cracks).
- UPGRADED FEATURES The head of the fishing pole stand allows 360-degree rotation on the horizontal axis and 180-degree rotation on the vertical axis.You can adjust and fix any angle according to your needs when fishing by the sea, river, or lake, freedom your hands, the necessary fishing equipment
- Extensive Use The fishing rod holder can be suitable for almost all sizes and types of fishing pole like spinning and casting rod etc.The detachable design of the fishing pole holder is easy to carry and storage
- BEST GIFTS The rod holders for bank fishing is an ideal choice as a gift for your father, husband, boyfriend, or grandson on Birthday, Father's Day, Christmas.
- See more on Amazon...
Brand: Hifisher | Manufacturer: Hifisher
Dimensions: 19.60 x 2.55 x 5.90 inches | Weight: 1.76 pounds
Warranty: 1YEAR
See On Amazon #10
KastKing Patented V15 Vertical Fishing Rod Holder - Store 15 Rods or Rod Combos in 17.25 Inches Wall Mounted Rod Rack
Asin: B09XCG8HP3
Innovative Design â This Innovative Fishing Pole Rack Is Simple And Easy To Use. Simply Push The Rod Firmly Into Either The Large Or Small V-Grooves Until The Polymer Grip Material Grabs The Rod. For Additional Stability, Hang The Rod With The Thread Wrapped Line Guides Just Above The V-Groove. The Tapered V-Grooves Can Accommodate Up To A Âœâ Diameter Rod With A Reel Attached. To Remove Your Combo From The Fishing Rod Rack Simply Grab The Rod Near The Rod Rack And Pull Straight Out..
Simple Installation â Kastking V15 Fishing Pole Racks Have 3 Mounting Holes. 2 Outside Holes Are 16â On Center For Secure Installation On Standard-Spaced Wall Studs. To Install The Rack, Determine The Correct Mounting Height For Your Poles, Install One Of The Outer Screws Into A Stud, Level The Rack And Mark Mounting Holes, Install Anchor For Center Mounting Hole, Re-Level Rod Rack, Install And Tighten All Screws. The Kastking V15 Fishing Rod Rack Will Organize Your Fishing Gear And Save Space..
Durable Material â The Kastking V15 Fishing Rod Holder Is Molded With Tough Amorphous Polymer Material Which Is Resistant To Heat, Chemicals, And Impact. The V-Grooves Are Co-Injected With A Tacky Thermoplastic Polymer Material To Ensure Rods And Combos Are Held Securely In Your Rack And DoesnâT Damage Or Mar Your Rods..
Store 15 Rods Or Combos â The Kastking V15 Vertical Fishing Rod Rack Can Store Up To 15 Rods Or Combos In Less Than 18 Inches Of Horizontal Wall Space. Most Other Brands Only Store 6 Combos In The Same Amount Of Space. Rods And Combos Can Be Mounted Virtually Anywhere Along The Length Of The Rod, Permitting Reels To Be Staggered At Different Heights For Minimum Storage Space..
Features
- KEY FEATURES - Store up to 15 fishing rods or fishing rod and reel combos in less than 18 of wall space Innovative Patented Design (U.S. Patent No.7,237,685) fishing pole holder is easy to use Easy installation with only 3 screws. Affordable Innovation.
- STORE 15 RODS OR COMBOS The KastKing V15 vertical fishing rod rack can store up to 15 rods or combos in less than 18 inches of horizontal wall space. Most other brands only store 6 combos in the same amount of space. Rods and combos can be mounted virtually anywhere along the length of the rod, permitting reels to be staggered at different heights for minimum storage space.
- INNOVATIVE DESIGN This innovative fishing pole rack is simple and easy to use. Simply push the rod firmly into either the large or small v-grooves until the polymer grip material grabs the rod. For additional stability, hang the rod with the thread wrapped line guides just above the v-groove. The tapered v-grooves can accommodate up to a diameter rod with a reel attached. To remove your combo from the fishing rod rack simply grab the rod near the rod rack and pull straight out.
- DURABLE MATERIAL The KastKing V15 fishing rod holder is molded with tough amorphous polymer material which is resistant to heat, chemicals, and impact. The v-grooves are co-injected with a tacky thermoplastic polymer material to ensure rods and combos are held securely in your rack and doesn t damage or mar your rods.
- SIMPLE INSTALLATION KastKing V15 fishing pole racks have 3 mounting holes. 2 outside holes are 16 on center for secure installation on standard-spaced wall studs. To install the rack, determine the correct mounting height for your poles, install one of the outer screws into a stud, level the rack and mark mounting holes, install anchor for center mounting hole, re-level rod rack, install and tighten all screws. The KastKing V15 fishing rod rack will organize your fishing gear and save space.
- See more on Amazon...
Brand: KastKing | Manufacturer: KastKing
Dimensions: 2.75 x 17.20 x 1.60 inches | Weight: 1.00 Pounds
See On Amazon #11
Cooltto Rod Holders for Bank Fishing - 2 Pack Fishing Rod Holder for Ground , Bank Fishing Rod Rack Stand , Fishing Pole Holders ,Gift for Men Father s Day, Birthday Day
Asin: B07C15JK8M | Model: FGHCB1S2-USFBA | PartNumber: FGHCB1S2-USFBA | Ean: 0747150217512 | UPC: 747150217512
Tapered Shape Drill Rod Construction Easily Goes Into Mud, Sand, Rock Cracks And Stands Sturdy And Strong, Rubber Coated U-Shape Holder, Prevent Your Fishing Rod From Slip Away And Protect Your Rod To Avoid Scratching.
Notes: The Bank Fishing Rod Holder Is Required To Be Tested With Fishing Pole. There Is The Video On The Left Of The Product Page To Show How To Test Of The Holder..
Just Set Your Rods Off The Ground And Wait For Bite, Fish In Ease And Relax. Quality Stainless Steel And Abs Plastic Construction, Light-Weight As Well As Durable And Never Rust.
Universal Fit: 1.5" Width, Enough To Adapting To General Most Rods Like Spinning, Casting And Spincast Rod.
Features
- Omni-directional adjustable rotary knob, loos the nut to make 360 rotate the head and fix to the direction you wanted, designed for compact folding, small packed, ideal for store and transport
- UNIVERSAL FIT: 1.5 width, enough to adapting to general most rods like spinning, casting and spincast rod
- Tapered shape drill rod construction easily goes into mud, sand, rock cracks and stands sturdy and strong, rubber coated U-shape holder, prevent your fishing rod from slip away and protect your rod to avoid scratching
- Just set your rods off the ground and wait for bite, fish in ease and relax. Quality stainless steel and ABS plastic construction, light-weight as well as durable and never rust
- Notes: The bank fishing rod holder is required to be tested with fishing pole. There is the video on the left of the product page to show how to test of the holder.
- See more on Amazon...
Brand: Coolnice | Manufacturer: coolnice
Dimensions: 5.90 x 12.40 x 1.50 inches
See On Amazon #12
GOLDEAL Rod Holders for Bank Fishing,Bank Fishing Rod Rack Stand,Fish Pole Holder for Beach,360 Degree Adjustable.(2 Pack)
Asin: B08MKVD27C | Ean: 0726756425828 | UPC: 726756425828
âš360° Omni-Directional Design:The Holder's Head Can Rotate 360 Degrees Horizontally And 130 Degrees Vertically Thanks To The 360° Omni-Directional Design. The Nut Keeps It Firm And Prevents It From Loosening. You Can Adjust It To Any Angle Needed When Fishing By The Sea, River, Or Lake..
âšThe Best Gifts For Birthdays, Father's Day And Christmas.
âšThis Large Bracket Can Be Used With All Types Of Fishing Rods, Making It Universal..
âšThe Tapered Shape Of The Drill Rod, Which Is Made Of Stainless Steel, Is Lengthened And Thickened, Making It Easy To Penetrate Into The Ground (Mud, Sand, And Rock Cracks). This Ensures That The Bank Holder Can Stand Sturdy In The Ground. The Detachable Design Also Makes It Easy To Carry And Store..
Features
- Made of high-strength stainless steel, this holder is sturdy, durable, and will never rust. With a rubber gasket, it will not damage the fishing rod.
- The tapered shape of the drill rod, which is made of stainless steel, is lengthened and thickened, making it easy to penetrate into the ground (mud, sand, and rock cracks). This ensures that the bank holder can stand sturdy in the ground. The detachable design also makes it easy to carry and store.
- 360 OMNI-DIRECTIONAL DESIGN:The holder's head can rotate 360 degrees horizontally and 130 degrees vertically thanks to the 360 omni-directional design. The nut keeps it firm and prevents it from loosening. You can adjust it to any angle needed when fishing by the sea, river, or lake.
- This large bracket can be used with all types of fishing rods, making it universal.
- The best gifts for birthdays, Father's Day and Christmas
- See more on Amazon...
Brand: GOLDEAL | Manufacturer: GOLDEAL
Weight: 0.93 pounds
See On Amazon #13
Amarine Made 2 Pcs Fishing Rod Holder, Stainless Tournament Style Clamp on Rod Holder, Rail Mount Fishing Pole Holder for Rails 7/8" to 1"
Asin: B00BJ2FQPC | Ean: 0700621158042 | UPC: 700621158042
ăAdjustable AnglesăWith Its 32 Different Angle Adjustments, The Rod Holders For Fishing Boat Offers Optimal Positioning For Your Fishing Rod. You Can Easily Customize The Angle To Suit Your Preferences And Fishing Needs, Providing A Comfortable And Efficient Fishing Experience..
ăSecure Rod PlacementăThe Base Of The Rod Holders For Fishing Features A Built-In Stopper Slot. This Slot Ensures That The Rod Butt Is Securely Located In Position, Preventing Any Accidental Slipping Or Movement During Use..
ăEasy InstallationăInstalling This Stainless Rod Holder Is A Breeze. The Package Includes A Mounting Bracket With Bolts For Convenient Installation. Please Note That The Allen Key Is Not Included, So Make Sure To Have Item On Hand For The Installation Process..
ăEnhanced SecurityăThe Rod Holder Is Designed With A Rubber Insert To Provide Excellent Protection For Your Fishing Rod. This Insert Acts As A Cushion, Against Any Wear Or Tear That Could Occur From Direct Contact With The Stainless Steel Surface..
Features
- Versatile Mounting This stainless steel fishing rod holder can be easily mounted to both vertical and horizontal rails. It is adjustable and compatible with rails ranging from 21mm (7/8") to 25mm (1") in diameter, allowing for installation flexibility.
- Enhanced Security The rod holder is designed with a rubber insert to provide excellent protection for your fishing rod. This insert acts as a cushion, against any wear or tear that could occur from direct contact with the stainless steel surface.
- Adjustable Angles With its 32 different angle adjustments, the rod holders for fishing boat offers optimal positioning for your fishing rod. You can easily customize the angle to suit your preferences and fishing needs, providing a comfortable and efficient fishing experience.
- Easy Installation Installing this stainless rod holder is a breeze. The package includes a mounting bracket with bolts for convenient installation. Please note that the Allen key is not included, so make sure to have item on hand for the installation process.
- Secure Rod Placement The base of the rod holders for fishing features a built-in stopper slot. This slot ensures that the rod butt is securely located in position, preventing any accidental slipping or movement during use.
- See more on Amazon...
Brand: Amarine Made | Manufacturer: Alfa-Marine (Shanghai)
See On Amazon #14
AMURS Fishing Rod Holders Racks Bracket,Wall Mounted Rod Holder Boat Rod Holders with 6inch Ball Bungee Cords and Screws,Portable Fishing Pole Holders for Boats, Garage, Cooler, Trailer
Asin: B0BY27DNF7 | Model: Fishing Rod Holders | PartNumber: Fishing Rod Holders
ăMulti-FunctionalăThe Fishing Rod Holders For Installing In Kayak, Fishing Cooler, Trailer And Indoor Wall Mount,So Quick To Take And Put Away Fishing Poles.Enjoy Your Fishing Time With Your Family And Friends.
ăPackage IncludedăRod Holders With 6Inch Ball Bungee Cords, Nuts And Screws, The Nut Is The Lock-Nut, Inside Is The Nylon Ring Damping In It, Which Can Prevent The Screw Loosening So That Can Hold The Rods Stable..
ăEasy To Install And RemoveăThis Fishing Pole Rack With Screws And Anti-Stripping Nuts, Flexible Install You Need . Attached Easily To Your Boat Truck Kayak Yacht, Or The Wall..
ăDesignăThere's Holes In The Front Open Mouth That You Can Use 6Inch Ball Bungee Cords To Fix Your Fishing Rod,Protects Your Favorite Rods From Damage During Transport Or Storage..
Features
- Material This 4-Tube fishing rod holder are made of ABS plastic, and Lightweight ,And come with screws for freshwater and saltwater to fix your rods,Free-hands. It can withstand 150KG weight ,Don't worry the plastic is flimsy
- Design There's holes in the front open mouth that you can use 6inch ball bungee cords to fix your fishing rod,Protects your favorite rods from damage during transport or storage.
- Multi-functional The fishing rod holders for installing in kayak, fishing cooler, trailer and indoor wall mount,So quick to take and put away fishing poles.Enjoy your fishing time with your family and friends
- Easy to install and remove This Fishing pole rack with screws and anti-stripping nuts, Flexible install you need . Attached easily to your boat truck kayak Yacht, or the wall.
- Package Included Rod holders with 6inch Ball Bungee Cords, nuts and screws, The nut is the lock-nut, Inside is the nylon ring damping in it, which can prevent the screw loosening so that can hold the rods stable.
- See more on Amazon...
Brand: AMURS | Manufacturer: AMURS
Dimensions: 2.36 x 8.66 x 3.15 inches | Weight: 1.32 Pounds
See On Amazon #15
PLUSINNO Fishing Rod Holders for Boat, Upgraded Fishing Rod Holder with Stable V-Shaped Design, Enlarge Clamp Up to 3.94Inch, Fit for Round/Square Tube Flat Surface, 360 Degree Adjustable Rod Holder
Asin: B0C4DNH27L
No Tools Needed - The Rod Holders For Boat Offers Vertically And Horizontally 360-Degree Adjustable, Allowing You To Effortlessly Position Your Rod For Optimal Placement And Wait For The Fish To Bite. It Is Simple To Install And Adjust The Angle Without The Need For Any Tools, Ensuring No Damage To The Boat. Please Note That It Is Not Recommended For Troll Fishing..
Perfect Design - The Deep-Tooth Gear Incorporates A Self-Locking Mechanism, Ensuring A Firm Grip Of The Rod Holder In The Mounting Base. This Provides Additional Safety And Stability, Offering Peace Of Mind And Comfort While Fishing On The Boat. No More Worries About The Boat Rod Holder Wobbling!.
Premium & Durable - The Main Body Of The Fishing Rod Holder Is Crafted Using Aluminum Alloy Die-Casting Technology, Ensuring Corrosion Resistance And Exceptional Strength. Marine-Grade, Corrosion-Resistant Stainless Steel Screws And Flexible Locking Adjustment Knob Enable You To Swiftly And Efficiently Complete The Installation Process..
Improved Stability - To Enhance Stability, Plusinno Fishing Rod Holders Features An Innovative Dual V-Thread And Anti-Slip Silicone Design, Offering A Generous Contact Area Of 3" L X 1.75" W. Furthermore, The Anti-Slip Silicone Pad Ensures A Secure Grip On The Boat, Without Leaving Any Scratches, Providing You With A Worry-Free Fishing Experience!.
Features
- UNIVERSAL FIT - PLUSINNO has achieved a significant breakthrough in the effective design of the clamping range for rod holder for boat! With an extended clamping range of 0.59" to 3.94", it is suitable for most boat types. Moreover, the fishing rod holders for boat is perfectly compatible with round pipes, square pipes, flat surfaces, and even some irregular objects.
- IMPROVED STABILITY - To enhance stability, PLUSINNO fishing rod holders features an innovative dual V-thread and anti-slip silicone design, offering a generous contact area of 3 L x 1.75 W. Furthermore, the anti-slip silicone pad ensures a secure grip on the boat, without leaving any scratches, providing you with a worry-free fishing experience!
- NO TOOLS NEEDED - The rod holders for boat offers vertically and horizontally 360-degree adjustable, allowing you to effortlessly position your rod for optimal placement and wait for the fish to bite. It is simple to install and adjust the angle without the need for any tools, ensuring no damage to the boat. Please note that it is not recommended for troll fishing.
- PREMIUM & DURABLE - The main body of the fishing rod holder is crafted using aluminum alloy die-casting technology, ensuring corrosion resistance and exceptional strength. Marine-grade, corrosion-resistant stainless steel screws and flexible locking adjustment knob enable you to swiftly and efficiently complete the installation process.
- PERFECT DESIGN - The deep-tooth gear incorporates a self-locking mechanism, ensuring a firm grip of the rod holder in the mounting base. This provides additional safety and stability, offering peace of mind and comfort while fishing on the boat. No more worries about the boat rod holder wobbling!
- See more on Amazon...
Brand: PLUSINNO | Manufacturer: PLUSINNO
See On Amazon #16
Rush Creek Creations Fishing Rod Holders for Garage, Fishing Pole Rack, Floor Stand Holds up to 16 Rods, Fishing Gear Equipment Storage Organizer, Fishing Gifts for Men
Asin: B095VCHM57 | Model: 38-4083 | PartNumber: 38-4083 | Ean: 0850001344722 | UPC: 850001344722
Versatile And Stylish: Effortlessly Adapts And Adds Luxurious Style To The DĂ©cor In Any Home, Cabin, Garage, Shed, Or Other Indoor Area.
Easy To Assemble: No Tools Are Required For Assembly, And The Rack Measures 13.3" L X 13.3" W X 30" H When Assembled For The Perfect Fishing Rod Organizational System For Anglers At All Levels.
High-Quality Build: Constructed With A Solid Wood Center Post With Waterproof Handle Guides On The Base Plate To Withstand Years Of Quality Use.
Highly-Functional Design: Features 16 Soft Freshwater Rod Clips With Padded Base Plate Slots For Easy Storage Without The Worry Of Tangled Lines Or Damaged Gear.
Features
- FISHING ROD STORAGE RACK: Offers a simple yet effective solution for your fishing pole storage needs, allowing you to keep all your favorite rods protected in the same location
- HIGHLY-FUNCTIONAL DESIGN: Features 16 soft freshwater rod clips with padded base plate slots for easy storage without the worry of tangled lines or damaged gear
- VERSATILE AND STYLISH: Effortlessly adapts and adds luxurious style to the d cor in any home, cabin, garage, shed, or other indoor area
- HIGH-QUALITY BUILD: Constructed with a solid wood center post with waterproof handle guides on the base plate to withstand years of quality use
- EASY TO ASSEMBLE: No tools are required for assembly, and the rack measures 13.3 L x 13.3 W x 30 H when assembled for the perfect fishing rod organizational system for anglers at all levels
- See more on Amazon...
Brand: Rush Creek Creations | Manufacturer: Rush Creek Creations
Dimensions: 30.00 x 13.39 x 13.39 inches | Weight: 4.62 pounds
Warranty: 90 day Manufacturer Warranty
See On Amazon #17
Fishin Stix 30" Extendable Trident Rod Holder 2 Pack, Green
Asin: B09V3DB3QK | Model: FST-1-G-2PK | PartNumber: FST-1-G-2PK | Ean: 0899644001340 | UPC: 899644001340
đŁ DonâT Fail Your Fishing Pole. Keep Your Rod GroundedâNot Flying For Open Waters. It Holds Your Fishing Equipment Down Safely With Impressive Durability And Strength. Just Set It Up Along The Shore Or Bank And Wait For The Fish To Start Biting!.
đȘ A FishermanâS Secret Weapon. Fishinâ Stix Are Forged For Peak Longevity And Performance. Gift One To A Friend To Add To Their Arsenal Of Fishing Accessories. For Pros And Rookies Alike..
đ Big Fish = Big Stick. Storable? Check. Portable? Double Check. This Fishing Rod Holder Is Made To Extend To Multiple Heights Up To 30â And Collapse To 12â To Fit Snugly In Your Favorite Tackle Box..
đ Withstands All Waters. Now You Can Reel In Boatloads Of Your Fish Of Choice, Freshwater And Saltwater Alike. Lock The Holder Into Place And Cast A Line Into Your Local Pond, Ocean, River, Or Stream For Instant Results. Catch Anything From Bass, Trout, Bluegill, Crappie, Catfish, Sea Trout, Snook, Croaker, Bluefish, Striped Bass, And More!.
Features
- NEPTUNE'S TRIDENTIN A FISHIN STIX! The Fishin Stix 30" Magnum Extendable Rod Holders are designed for anglers by anglers to target the mightiest swimmers. Its trident design secures your rod so you can bait your hook or swap lures, no sweat. Choose between packs of 2 or 4 in assorted, vivid colors.
- WITHSTANDS ALL WATERS. Now you can reel in boatloads of your fish of choice, freshwater and saltwater alike. Lock the holder into place and cast a line into your local pond, ocean, river, or stream for instant results. Catch anything from bass, trout, bluegill, crappie, catfish, sea trout, snook, croaker, bluefish, striped bass, and more!
- DON T FAIL YOUR FISHING POLE. Keep your rod grounded not flying for open waters. It holds your fishing equipment down safely with impressive durability and strength. Just set it up along the shore or bank and wait for the fish to start biting!
- BIG FISH = BIG STICK. Storable? Check. Portable? Double check. This fishing rod holder is made to extend to multiple heights up to 30 and collapse to 12 to fit snugly in your favorite tackle box.
- A FISHERMAN S SECRET WEAPON. Fishin Stix are forged for peak longevity and performance. Gift one to a friend to add to their arsenal of fishing accessories. For pros and rookies alike.
- See more on Amazon...
Brand: Fishin Stix | Manufacturer: Fishin Stix
See On Amazon #18
Hikeen Fishing Rod Holders, Fishing Pole Holders for Garage, Wall or Ceiling Mounted Fishing Rod Rack Holds 10 Rods
Asin: B0CT5N813S | Model: LY-KF0278 | PartNumber: LY-KF0278
ăSturdy & Durable Materială Fishing Pole Holders For Garage Are Made Of Durable Abs Which Is Bend But Not Break, It Features Great Load-Bearing And Ensure Long-Lasting Performance.The Rod Holes And Openings Are Lined With Soft Silicone Protective Pad To Prevent Damage And Scratches To Your Favorite Rods.The Thickened Protective Pad Design On The Contact Surface Increases The Stress-Bearing Area Of The Rod And Rack, So There Is No Need To Worry About Indentations After Long-Term Storage..
ăEasy To InstallăThe Fishing Rod Storage Rack Includes Matching 12 Screws .You Only Need To Nail The Screws To The Wall To Fix The Bracket To The Wall Or Ceiling. If You Have Any Questions, Please Contact Us In Time, And We Will Answer Your Questions Promptly..
ăFit Most Fishing Rods ăThe Diameter Is 1.61''/41Mm, Which Can Meet Your Need To Store Different Types Of Fishing Rods, Such As Casting, Trolling, Spinning Rods, Saltwater Rods, Etc. It Is Perfect For Space-Efficient Storage In Your Living Room, Garage, Basement, Workshop, And Boathouse. Let Your Messy Fishing Gear Become Orderly In An Instant!.
ăInnovative Arc Structure DesignăThis Fishing Rod Holder Storage Adopts An Innovative Inclined Opening Combined With Arc Structure Designed. The Inclined Opening Makes Easily Store Or Take Out Your Fishing Rod. Simply Insert The Butt Of The Rod Into One Of The Holes And Guide The Tip Through The Opening On The Opposite Rack For Safe Storage.Pls Alternate The Direction The Rod Is Facing On The Top And Bottom Hooks To Make Sure It Holds A Total Of 10 Rods With Reels Without Hitting Each Other. The Arc Structure Ensures Rods And Combos Wrapped Well And Securely In Your Fishing Rod Rack..
Features
- Store 10 Rods or Combos The Fishing Rod Holders for Garage offer a practical solution for anyone looking to declutter and protect their valuable fishing gear.Our fishing rod rack can holds up to 10 rods or combos, maximizing the use of your space.It can be installed on the wall or ceiling giving you the flexibility to customize your storage space as your needs.
- Innovative Arc Structure Design This fishing rod holder storage adopts an innovative Inclined Opening combined with Arc Structure Designed. The Inclined Opening makes easily store or take out your fishing rod. Simply insert the butt of the rod into one of the holes and guide the tip through the opening on the opposite rack for safe storage.Pls alternate the direction the rod is facing on the top and bottom hooks to make sure it holds a total of 10 rods with reels without hitting each other. The arc structure ensures rods and combos wrapped well and securely in your fishing rod rack.
- Sturdy & Durable Material Fishing pole holders for garage are made of durable ABS which is bend but not break, it features great load-bearing and ensure long-lasting performance.The Rod holes and openings are lined with soft silicone protective pad to prevent damage and scratches to your favorite rods.The thickened protective pad design on the contact surface increases the stress-bearing area of the rod and rack, so there is no need to worry about indentations after long-term storage.
- Fit Most Fishing Rods The diameter is 1.61''/41mm, which can meet your need to store different types of fishing rods, such as Casting, Trolling, Spinning rods, Saltwater rods, etc. It is perfect for space-efficient storage in your living room, garage, basement, workshop, and boathouse. Let your messy fishing gear become orderly in an instant!
- Easy to Install The fishing rod storage rack includes matching 12 screws .You only need to nail the screws to the wall to fix the bracket to the wall or ceiling. If you have any questions, please contact us in time, and we will answer your questions promptly.
- See more on Amazon...
Brand: Hikeen | Manufacturer: Hikeen
Warranty: 1Year
See On Amazon #19
Fishing Rod Holder, 4 Pack Fishing Pole Holders Ground, Rod Holders for Bank Fishing, Beach Support Stand Reinforced PVC, 4 Free Alarm Bells
Asin: B09332MRQ8 | Model: Holder0411 | PartNumber: Holder0411 | Ean: 0796917223358 | UPC: 796917223358
ăEasy To UseăWhen In Use, The Tapered Drill Rod Is Connected To The Outside, And When Stored, The Tapered Drill Rod Is Connected To The Inside. The Pvc Pipe Can Wrap The Tapered Drill Rod, So There Is No Need To Worry About Damaging The Fishing Tackle Bag. The Detachable Design Of The Fishing Rod Bracket Makes It Easier To Carry..
ăUnique Gift ChoiceăIf Your Father Is A Fishing Enthusiast, Then This Must Be A Special Gift, And Also A Great Gift For Friends, Colleagues And Neighbors Who Like To Fish..
ăPerfect Companion For AnglersăThis Is A Simple And Practical Fishing Tool, Suitable For Fishing Beginners, Fishing Enthusiasts With Several Fishing Rods, Kids, And Everyone Who Likes Fishing..
ăUniversal FităThe Fishing Rod Holder Can Be Applied To Almost All Types Of Fishing Rods, Such As Surf Spinning And Casting Rods. Can Also Be Applied To Fishing Landing Nets, Fishing Floats, And Even Sun Umbrellas As Needed..
Features
- High-quality Materials The fishing rod holder can be easily into the ground stands sturdy and strong. It can be mud, sand, rock cracks, etc. The tapered shape drill rod is made of galvanized steel. Reinforced PVC has high hardness and high toughness.
- Universal Fit The fishing rod holder can be applied to almost all types of fishing rods, such as surf spinning and casting rods. Can also be applied to fishing landing nets, fishing floats, and even sun umbrellas as needed.
- Easy to Use When in use, the Tapered Drill Rod is connected to the outside, and when stored, the Tapered Drill Rod is connected to the inside. The PVC pipe can wrap the tapered drill rod, so there is no need to worry about damaging the fishing tackle bag. The detachable design of the fishing rod bracket makes it easier to carry.
- Perfect Companion for Anglers This is a simple and practical fishing tool, suitable for fishing beginners, fishing enthusiasts with several fishing rods, kids, and everyone who likes fishing.
- Unique Gift Choice If your father is a fishing enthusiast, then this must be a special gift, and also a great gift for friends, colleagues and neighbors who like to fish.
- See more on Amazon...
Brand: Tendiren | Manufacturer: ZhongYu
Warranty: Fishing Rod Holder
See On Amazon ï»ż
Looking For Something Else?
Search