Taytools 279144 One Piece 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System
Asin: B07T7ZMGL2 | Model: 279144 | PartNumber: 279144 | Ean: 0737787279144 | UPC: 737787279144
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Piece Will Accommodate 1/2 Sheet Of 8-1/2 X 11 Microfinishing Or Lapping Film.
The Scary Sharp Sharpening Method Is An Approach To Sharpening Knives And Woodworking Tools That Is Fast, Effective, Consistent And Very Cost Effective..
Comes With Anti-Slip Pad.
Float Glass Is Dead Flat And The Perfect Substrate To Attach Abrasive Sheets.
Features
- This is a piece of 5/16 inch thick x 5 inch x 12 inch float glass for use as a flat, hard surface in a the Scary Sharpening System
- Float glass is dead flat and the perfect substrate to attach abrasive sheets
- Piece will accommodate 1/2 sheet of 8-1/2 x 11 microfinishing or lapping film
- Comes with anti-slip pad
- The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 2.00 x 14.00 x 6.00 inches
See On Amazon Similar To Taytools 279144 One Piece 5
#1
Taytools 12 Piece Set Glass Reinforced Nylon Clamping Assembly Set Contains Sizes 2 x 3-1/8 , 4 x 4 and 6 x 6 Guaranteed Square Within +/- 0.002
Asin: B0BDVYYS4J | Model: 12 piece set | PartNumber: 12 piece set
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Set Contains 4 Each Of The Following Sizes: 2-Inch X 3-1/8-Inch, 4-Inch X 4-Inch And 6-Inch X 6-Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Set contains 4 each of the following sizes: 2-inch x 3-1/8-inch, 4-inch x 4-inch and 6-inch x 6-inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 6.00 x 9.00 x 11.00 Inches
See On Amazon #2
Taytools 106391 4 Piece Set 6 x 6 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVSTKCJ | Model: 106391 | PartNumber: 106391
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 6-Inch X 6-Inch. Leg Thickness Is 0.950 Inch And Leg Width Is 0.1.380 Inch.
.
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 6-inch x 6-inch. Leg thickness is 0.950 inch and leg width is 0.1.380 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.95 x 6.00 x 6.00 Inches
See On Amazon #3
Taytools 106392 4 Piece Set 8 x 8 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVWZ2N4 | Model: 106392 | PartNumber: 106392
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 8-Inch X 8-Inch. Leg Thickness Is 1.130 Inch And Leg Width Is 0.1.570 Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 8-inch x 8-inch. Leg thickness is 1.130 inch and leg width is 0.1.570 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 1.13 x 8.00 x 8.00 Inches
See On Amazon #4
Taytools 106390 4 Piece Set 4 x 4 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVVLRH2 | Model: 106390 | PartNumber: 106390
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 4-Inch X 4 Inch. Leg Thickness Is 0.600 Inch And Leg Width Is 0.940 Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 4-inch x 4 inch. Leg thickness is 0.600 inch and leg width is 0.940 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.60 x 4.00 x 4.00 inches
See On Amazon #5
Taytools 106389 4 Piece Set 2 x 3-1/8 Glass Reinforced Nylon Clamping Assembly Guaranteed Square Within +/- 0.002
Asin: B0BDVV8RJG | Model: 106389 | PartNumber: 106389
They Are Made From Tough Unbendable Impact Resistant Glass Reinforced Nylon For Extreme Durability And Rigidity. They Will Maintain Their Squareness And Not Flex Even Under The Load Of Larger Assemblies. They Are Guaranteed To Be Square Within 0.002” (Two Thousandths Of An Inch) Over The Length Of Each Arm..
They Come In Sets Of 4 Each..
Overall Size Is 2-Inch X 3-1/8 Inch. Leg Thickness Is 0.500 Inch And Leg Width Is 0.700 Inch..
They Can Also Be Used In 90-Degre Jigs And Fixtures. They Can Be Secured To Corners With Spring Clamps Or Small F-Style Clamps And Work On Both Inside And Outside Corners. They Have Relieved Corners To Prevent Contact With Glue Squeeze Out And To Prevent Damage To Outside Corners..
Features
- These economical 90-degree corner clamping squares provide a helping hand when assembling cabinet carcasses, drawers, boxes, face frames or anything else that needs to be square. They are especially useful when assembling complex cabinet carcasses.
- They can also be used in 90-degre jigs and fixtures. They can be secured to corners with spring clamps or small F-style clamps and work on both inside and outside corners. They have relieved corners to prevent contact with glue squeeze out and to prevent damage to outside corners.
- They are made from tough unbendable impact resistant glass reinforced nylon for extreme durability and rigidity. They will maintain their squareness and not flex even under the load of larger assemblies. They are guaranteed to be square within 0.002 (two thousandths of an inch) over the length of each arm.
- Overall size is 2-inch x 3-1/8 inch. Leg thickness is 0.500 inch and leg width is 0.700 inch.
- They come in sets of 4 each.
- See more on Amazon...
Brand: Taytools | Manufacturer: Taylor Toolworks
Dimensions: 0.50 x 2.00 x 3.13 inches
See On Amazon
Looking For Something Else?
Search