C4Labs - JRZ-1S case for Raspberry Pi Zero/Zero W & JumboSPOT or Lonestar MMDVM Simplex
Asin: B07TWNSQ29 | Model: JRZ-1S-BLK | PartNumber: JRZ-1S-BLK | Ean: 0744676486255 | UPC: 744676486255
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Cut Outs For Easy Access To Sd Card And Camera Ports.
Pin-Hole Access To Boot And Reset Buttons On Top Of Case.
Comes With 2 Tops: One With Antenna Hole And One Without.
Full Body Coverage For Raspberry Pi, Jumbospot Or Lonestar Mmdvm Simplex And Oled Screen (Not Waterproof). Note: Raspberry Pi Zero 2 Has Not Been Tested For Heat Issues. Enough Room For .96″ Oled Screen To Be Mounted Directly To Jumbospot Or Lonestar Mmdvm Simplex By Customer.
Features
- This is case kit. Assembly is required. No components are included.
- Full body coverage for Raspberry Pi, JumboSPOT or LoneStar MMDVM Simplex and OLED screen (not waterproof). Note: Raspberry Pi Zero 2 has not been tested for heat issues. Enough room for .96 OLED screen to be mounted directly to JumboSPOT or LoneStar MMDVM Simplex by customer
- Cut outs for easy access to SD card and camera ports
- Comes with 2 tops: one with antenna hole and one without
- Pin-hole access to boot and reset buttons on top of case
- See more on Amazon...
Brand: C4Labs | Manufacturer: C4Labs
Dimensions: 1.00 x 3.00 x 2.00 inches
See On Amazon Similar To C4Labs JRZ1S case for Raspberry
#1
C4Labs ZRPi-1AS case for Raspberry Pi4, Pi3 B+ and ZUMspot with Attached 1.3 OLED
Asin: B07MQBYLGW | Model: ZRPi-1AS-BLK | PartNumber: ZRPi-1AS-BLK | Ean: 0744676486774 | UPC: 744676486774
Can Be Used With A Zumspot With Or Without Attached 1.3″ Oled Or A Jumbospot With Attached .96″ Oled Or N5boc Lonestar Board..
Heatsinks And Rubber Feet Included. Made With Stainless Steel Hardware..
Cut Outs For Easy Access To Sd Card And Camera Ports..
Full Body Coverage For Pi And Zumspot Hat (Not Waterproof)..
Features
- For Raspberry Pi4, 3B+, 3B, 2B, and B+ (not included) and ZUMspot, JumboSpot or N5BOC Lonestar Board with or without an attached 1.3 OLED (not included).
- Full body coverage for Pi and ZUMspot hat (not waterproof).
- Can be used with a ZUMspot with or without attached 1.3 OLED OR a JumboSPOT with attached .96 OLED or N5BOC Lonestar Board.
- Cut outs for easy access to SD card and camera ports.
- Heatsinks and rubber feet included. Made with stainless steel hardware.
- See more on Amazon...
Brand: C4Labs | Manufacturer: C4Labs
Dimensions: 1.50 x 3.63 x 2.75 inches
See On Amazon #2
C4Labs JRPi-3.5NSX Nextion Screen Case for Raspberry Pi 4B & 3B+, Jumbospot MMDVM, and 3.5" Nextion Screen (Included)
Asin: B08ZXPGC9X | Model: ZEB-NEXT-3.5SCRN-BLKICE | PartNumber: ZEB-NEXT-3.5SCRN-BLKICE | Ean: 0685674058269 | UPC: 685674058269
*Please Note That Connecting The Nextion Screen To Your Set-Up May Require Additional Soldering Of Pins Or Wires Not Covered In These Case Instructions..
Engineered And Manufactured With Pride In Tacoma, Wa Usa.
Note: This Case Does Not Have A Fan And The Pi-4 Is Known To Run Hot Under Use. It Is Not Recommended To Run The Pi-4 At Full Power For Extended Periods As Performance Problems Can Arise At Higher Temperatures.* The New Inner Layers Have Been Designed To Fit The Pimoroni Fan Shim (Not Included).
For Raspberry Pi 4B, 3B+, 3B, 2B, And B+ (Not Included), Jumbospot (A Generic Chinese Mmdvm Board - Not Included), And A 3.5″ Enhanced Nextion Touchscreen (Included). Carefully Designed To Precisely Fit These Components Using Laser Cut Components And Stainless Steel Hardware. Full Body Coverage For Components (Not Waterproof). Heat Sinks And Rubber Feet Included..
Features
- If you have a Zumspot Brand MMDVM Board there is a new case model: ZRPI-3.5NSX
- For Raspberry Pi 4B, 3B+, 3B, 2B, and B+ (not included), JUMBOspot (a generic Chinese MMDVM board - Not included), and a 3.5 Enhanced Nextion Touchscreen (included). Carefully designed to precisely fit these components using Laser cut components and stainless steel hardware. Full body coverage for components (not waterproof). Heat sinks and rubber feet included.
- *Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions.
- Note: This case does not have a fan and the Pi-4 is known to run hot under use. It is not recommended to run the Pi-4 at full power for extended periods as performance problems can arise at higher temperatures.* The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included)
- Engineered and manufactured with Pride in Tacoma, WA USA
- See more on Amazon...
Brand: C4Labs | Manufacturer: C4Labs
Dimensions: 1.50 x 4.75 x 2.75 inches | Weight: 0.34 pounds
See On Amazon #3
C4Labs DRZ-1S Zebra Duplex Pi Zero Screen Case Raspberry Pi Zero/Zero W & MMDVM Duplex
Asin: B07GX5BY2J | Model: ZBRA-ZERO-DUPLX-BLK | PartNumber: ZBRA-ZERO-DUPLX-BLK | Ean: 0744676486347 | UPC: 744676486347
Space For A .96" 128X64 Oled Screen.
Designed And Crafted By Local Artists In Tacoma, Wa Usa.
Cut Outs For Easy Access To Sd Card And Ports.
Full Body Coverage For Raspberry Pi Zero/Zero W, Mmdvm Duplex Dual Antenna, And Oled Screen (Not Waterproof).
Features
- For Raspberry Pi Zero and Zero W (not included),Lonestar (N5BOC) MMDVM DUPLEX (not included), and an OLED screen (not included). Note: Raspberry Pi Zero 2 has not been tested for heat issues.
- Full body coverage for Raspberry Pi Zero/Zero W, MMDVM DUPLEX dual antenna, and OLED screen (not waterproof)
- Space for a .96 128x64 OLED screen
- Cut outs for easy access to SD card and ports
- Designed and Crafted by local artists in Tacoma, WA USA
- See more on Amazon...
Brand: C4Lab | Manufacturer: C4Labs
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.13 pounds
See On Amazon #4
C4Labs ZRPi-3.5NSX Nextion Screen Case Raspberry Pi 3 B+, ZUMspot MMDVM, and Enhanced 3.5" Nextion Screen (Included) ~ Black Ice
Asin: B07Y5MR3VX | Model: ZEB-NEXT-3.5SCRN-BLKICE | PartNumber: ZEB-NEXT-3.5SCRN-BLKICE | Ean: 0744676487351 | UPC: 744676487351
*Please Note That Connecting The Nextion Screen To Your Set-Up May Require Additional Soldering Of Pins Or Wires Not Covered In These Case Instructions..
Engineered And Manufactured With Pride In Tacoma, Wa Usa.
Note: This Case Does Not Have A Fan And The Pi-4 Is Known To Run Hot Under Use. It Is Not Recommended To Run The Pi-4 At Full Power For Extended Periods As Performance Problems Can Arise At Higher Temperatures.* The New Inner Layers Have Been Designed To Fit The Pimoroni Fan Shim (Not Included).
For Raspberry Pi 4B, 3B+, 3B, 2B, And B+ (Not Included), Zumspot Brand Mmdvm Board (Not Included), And A 3.5" Enhanced Nextion Touchscreen (Included). Carefully Designed To Precisely Fit These Components Using Laser Cut Components And Stainless Steel Hardware. Full Body Coverage For Components (Not Waterproof). Heat Sinks And Rubber Feet Included..
Features
- If you have a Generic Chinese MMDVM Board (Jumbospot) there is a new case model: JRPI-3.5NSX
- For Raspberry Pi 4B, 3B+, 3B, 2B, and B+ (not included), ZUMspot Brand MMDVM Board (Not included), and a 3.5 Enhanced Nextion Touchscreen (included). Carefully designed to precisely fit these components using Laser cut components and stainless steel hardware. Full body coverage for components (not waterproof). Heat sinks and rubber feet included.
- *Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions.
- Note: This case does not have a fan and the Pi-4 is known to run hot under use. It is not recommended to run the Pi-4 at full power for extended periods as performance problems can arise at higher temperatures.* The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included)
- Engineered and manufactured with Pride in Tacoma, WA USA
- See more on Amazon...
Brand: C4Labs | Manufacturer: C4Labs
Dimensions: 1.50 x 5.75 x 2.75 inches | Weight: 0.34 pounds
See On Amazon #5
C4Lab ZRZ-1AS-0.6r case for Raspberry Pi Zero/Zero W & ZUMspot V0.6r with Attached 1.3 OLED (Black Ice)
Asin: B08C6N558N | Model: ZRZ-1AS-BLK | PartNumber: ZRZ-1AS-BLK | Ean: 0744676489027 | UPC: 744676489027
Can Be Used With Zumspot V0.6R Without Attached 1.3″ Oled.
Designed And Made In Tacoma, Wa Usa.
For Raspberry Pi Zero And Zero W (Not Included) And Zumspot V0.6R With Attached 1.3″ Oled (Not Included)..
Cut Outs For Easy Access To Ports.
Features
- Full body coverage for Full body coverage for Raspberry Pi Zero and ZUMspot V0.6r with attached 1.3 OLED (not waterproof). Note: Raspberry Pi Zero 2 has not been tested for heat issues.
- Cut outs for easy access to ports
- Can be used with ZUMspot V0.6r without attached 1.3 OLED
- For Raspberry Pi Zero and Zero W (not included) and ZUMspot V0.6r with attached 1.3 OLED (not included).
- Designed and made in Tacoma, WA USA
- See more on Amazon...
Brand: C4Lab | Manufacturer: C4Labs
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.16 pounds
See On Amazon #6
C4Labs-Dual Band Case Kit fits: Zumspot Dual Band Rpi 1.0 & Raspberry Pi 3B+ & 4B
Asin: B08V76BN52 | Model: Zeb-ZUM-Dual Band-3B | PartNumber: Zeb-ZUM-Dual Band-3B | Ean: 0753864336418 | UPC: 753864336418
It Is Not Recommended To Use The Raspberry Pi 4B Without A Cooling Fan. This Case Has Been Designed To Fit A Pimoroni Fan Shim (Not Included)..
Designed And Crafted By Local Artists In Tacoma, Wa Usa.
Cut Outs For Easy Access To Sd Card And Ports.
Features
- Full body coverage for Raspberry Pi 3B+ or 4B (sold separately) and Zumspot Dual Band (sold separately)
- Cut outs for easy access to SD card and ports
- It is not recommended to use the Raspberry Pi 4B without a cooling fan. This case has been designed to fit a Pimoroni Fan Shim (not included).
- Designed and Crafted by Local Artists in Tacoma, WA USA
- See more on Amazon...
Brand: C4Labs | Manufacturer: C4Labs
Dimensions: 1.25 x 3.75 x 3.00 inches | Weight: 0.25 pounds
See On Amazon #7
C4Labs - Dual Band Kit Case fits: Zumspot Dual Band Rpi 1.0 & Raspberry Pi Zero with Header
Asin: B07ZZLKKXM | Model: Zeb-ZUM-Dual Band | PartNumber: Zeb-ZUM-Dual Band | Ean: 0744676487597 | UPC: 744676487597
Laser Cut For Precision Fit.
Designed And Crafted In Tacoma, Wa Usa.
Cut Outs For Easy Access To Sd Card And Ports.
Features
- Full body coverage for Raspberry Pi (sold separately) and Zumspot Dual Band (sold separately). Note: Raspberry Pi Zero 2 has not been tested for heat issues.
- Cut outs for easy access to SD card and ports
- Laser cut for precision fit
- Designed and Crafted in Tacoma, WA USA
- See more on Amazon...
Brand: C4Lab | Manufacturer: C4Labs
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.25 pounds
See On Amazon #8
C4Labs Puck Pi Case for Raspberry Pi 4 and 3B+ (Pirate)
Asin: B078YHTD4Z | Model: PCK-SIX | PartNumber: PCK-SIX | Ean: 0753864335688 | UPC: 753864335688
For Quality We Use Stainless Steel Screws.
Made In The Usa!.
Like The C4labs Puck? Checkout Our 5 Other Styles!.
Rubber Feet And Free Heat Sinks Are Also Included.
Features
- Raspberry Pi NOT INCLUDED
- Rubber feet and free heat sinks are also included
- For quality we use stainless steel screws
- Like the C4Labs Puck? Checkout our 5 other styles!
- Made in the USA!
- See more on Amazon...
Brand: C4Labs | Manufacturer: C4 Labs
Dimensions: 1.45 x 4.25 x 4.25 inches | Weight: 0.44 pounds
See On Amazon #9
C4Labs Rebel Case Kit fits Raspberry Pi 3 B+, 2, B+ and A+ (not Included)
Asin: B013PX2O1G | Model: 0 | PartNumber: 0 | Ean: 0640864148700 | UPC: 640864148700
Detailed Etched Info-Graphic With Pinouts And Data.
Designed And Crafted By Local Artists In Tacoma, Wa Usa.
Heatsinks Included.
Precision Cut Matte Clear Acrylic. Diy Open-Air Design.
Features
- For Raspberry Pi 3B+, 2, B+ and A+ (not included)
- Precision Cut Matte Clear Acrylic. DIY Open-Air design
- Detailed etched info-graphic with pinouts and data
- Heatsinks included
- Designed and Crafted by Local Artists in Tacoma, WA USA
- See more on Amazon...
Brand: C4Labs | Manufacturer: C4Labs
Dimensions: 2.00 x 7.00 x 4.50 inches | Weight: 0.38 pounds
See On Amazon
Looking For Something Else?
Search