Motor Connection Cable,3D Printer Stepper Motor Cable Terminal Connector Cable,1.5M/4.92FT,Double Z Axis, and Precise Design,Suitable for CR-10 CR-10S/Ender-3
Asin: B07VDRB6MD | Model: Ciglowrib41xgvga | PartNumber: Ciglowrib41xgvga | Ean: 0694951389873 | UPC: 694951389873
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Appropriate Length】The Length Of The Line Is Moderate, 1.5M/4.92Ft. It Can Meet Individual Needs. Put The Stepper Motor Where You Like And Don’T Worry About The Length..
【Stable Performance】The Connection Position Is Accurate, And There Is No Problem Of Poor Contact..
【High-Quality Material】This Product Is Made Of High-Quality Materials. , Practical And Precise Design Will Ensure Its Practicality In High-Performance Work..
【Simple And Convenient】The Operation Is Simple, Just Plug It Into The Motherboard To Connect, And Then Plug In 2 Or 1 Stepping Cables, And It Can Be Used Normally..
Features
- Dual Z-axis Connection Line This is a dual Z-axis motor connection line, which can connect two stepper motors on one line to solve the multi-wire winding problem.
- Simple and Convenient The operation is simple, just plug it into the motherboard to connect, and then plug in 2 or 1 stepping cables, and it can be used normally.
- Appropriate Length The length of the line is moderate, 1.5m/4.92ft. It can meet individual needs. Put the stepper motor where you like and don t worry about the length.
- High-Quality Material This product is made of high-quality materials. , practical and precise design will ensure its practicality in high-performance work.
- Stable Performance The connection position is accurate, and there is no problem of poor contact.
- See more on Amazon...
Brand: Ciglow | Manufacturer: Ciglow
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon Similar To Motor Connection Cable3D Printer Stepper
#1
Creality Official 42-40 Stepper Motor with Extruder Gear, 2 Phase 1A 1.8 Degree 0.4 N.M for 3D Printer Extruder, Compatible with E-axis of Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/CR-10 3D Printer
Asin: B09ZQT9DJY
High-Quality Stepping Motor: With Low Power, Stable Speed And Performance, Low Noise, And No Step Loss During Operation, Which Ensures The Stable Operation Of The Extrusion Mechanism..
After-Sales Service: If You Have Any Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Low Noise & High Precision: It Fits Perfectly With The High-Strength Synchronous Wheel And Synchronous Gear, Which Ensures Its High Precision, Reduces Vibration And Noise During Work, And Provides You With A Relatively Quiet Printing Environment..
Parameter: 1.8-Degree Step Angle, 0.4 N.M Holding Torque, With 1A Rated Current Per Phase. (The Connecting Cable Is Not Included.).
Features
- Official Guarantee: 100% Creality official stepper motor, our 42-40 stepper motor compatibility with Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5 plus/Ender 3 max/CR-10/CR-10s/CR-10 V2/CR-10V3 3D Printer.
- Parameter: 1.8-degree step angle, 0.4 N.M holding torque, with 1A rated current per phase. (The connecting cable is not included.)
- High-Quality Stepping Motor: With low power, stable speed and performance, low noise, and no step loss during operation, which ensures the stable operation of the extrusion mechanism.
- Low Noise & High Precision: It fits perfectly with the high-strength synchronous wheel and synchronous gear, which ensures its high precision, reduces vibration and noise during work, and provides you with a relatively quiet printing environment.
- After-sales Service: If you have any unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 2.36 x 1.65 x 1.65 inches
See On Amazon #2
Creality 3D Printer 42-40 Stepper Motor, 2 Phase 1A 1.8 Degree 0.4N.M Stepper Motor for 3D Printer Extruder, Compatible with CR-10 and Ender-3 Series E Axis
Asin: B091CXPXVP | Model: KYF-3D-021 | PartNumber: KYF-3D-021 | Ean: 8424511432907
High Quality Stepping Motor: The High Quality Motor With Low Power, Smooth Speed, Stable Performance, Low Noise And No Loss During Operation, Which Ensures The Stable Operation Of The Extrusion Mechanism..
What You Get: 1X 42-40 Stepper Motor (Note: This Item Does Not Include A Connection Cable Or Screws.).
Low Noise: Stepper Motor With Low Noise Level And Efficient Heat Dissipation Has The Large Torque And High Precision Without Losing Step..
1.8 Degree Step Angle, 0.4 N.M Holding Torque, With 0.8 A Rated Current Per Phase..
Features
- Compatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 / Ender 3 Pro / CR 10 / CR 10S etc.).
- 1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.
- High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.
- Low noise: stepper motor with low noise level and efficient heat dissipation has the large torque and high precision without losing step.
- What You Get: 1x 42-40 Stepper Motor (Note: This item does not include a connection cable or screws.)
- See more on Amazon...
Brand: KOYOFEI | Manufacturer: KOYOFEI
Dimensions: 2.36 x 1.65 x 1.65 inches | Weight: 0.64 pounds
See On Amazon #3
Creality Official 42-40 Stepper Motor, 3D Printer X/Y-Axis Extruder Stepping Motor 2 Phase 1A 1.8 Degree 0.4 N.M, Compatible with CR-10 Series and Ender-3 Series X/Y/E-axis D-Shape
Asin: B09L5M63B1 | Model: Ender-3 | PartNumber: Ender-3 | Ean: 0679628391762 | UPC: 679628391762
🆗【Low Noise Stepper Motor】The High-Quality Motor With Low Power, Uniform Speed, Stable Performance, High Accuracy, Low Noise, And No Step To Lose During The Operation, Which Ensures The Extrusion Mechanism Stable Operation. This Greatly Reduces The Vibration And Noise When The Motor Is Working, Keeps You Focused, And Provides A Quiet Printing Experience For Colleagues And Family..
👍【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly, Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
⭕【Precise Rotation】Perfectly Fits With The High-Strength Synchronous Wheel And Synchronous Gear, It Realizes Accurate Constant Ratio, Uniform Revolution, And High Transmission Efficiency, While Avoiding System Errors And Obtaining Accurate Results. Shaft Diameter: 5Mm(D-Shape).
❤【High-Quality Stepper Motor】3D Printer Motor With Low Noise And Efficient Heat Dissipation Has Large Torque And High Precision Without Losing Steps. 1.8-Degree Step Angle, 0.4N.M Holding Torque, With 1A Rated Current Per Phase. This Means That You Can Save On The Cost Of Replacing Or Repairing The Engine..
Features
- Quality security Creality 100% official, Original 42-40 stepper motor applies for E-Axis of CR 10 Max/ CR 10 Smart/ CR 10S Pro V2/ CR 30/ CR 6 Max/ CR 6 SE/ CR X/ CR X Pro/ Ender 3 Max/ Ender 3 Neo; X-Axis of CR 10 Max/ CR 10S Pro V2/ CR X/ CR X Pro; Y-Axis of CR 10 Smart/ CR 10 V2/ CR 10 V3/ CR 6 SE/ Ender 3 Max/ Ender 3 Max Neo. The connecting cable is not included!
- High-quality Stepper Motor 3D Printer motor with low noise and efficient heat dissipation has large torque and high precision without losing steps. 1.8-degree step angle, 0.4N.M holding torque, with 1A rated current per phase. This means that you can save on the cost of replacing or repairing the engine.
- Low Noise Stepper Motor The high-quality motor with low power, uniform speed, stable performance, high accuracy, low noise, and no step to lose during the operation, which ensures the extrusion mechanism stable operation. This greatly reduces the vibration and noise when the motor is working, keeps you focused, and provides a quiet printing experience for colleagues and family.
- Precise Rotation Perfectly fits with the high-strength synchronous wheel and synchronous gear, it realizes accurate constant ratio, uniform revolution, and high transmission efficiency, while avoiding system errors and obtaining accurate results. Shaft diameter: 5mm(D-shape)
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly, cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 1.57 x 1.65 x 1.65 inches | Weight: 0.64 pounds
See On Amazon #4
FYSETC 3D Printer Parts Ender 3 Stepper Motor Cable X Y Z Axis Stepper Motor and Limited Switch Endstop Cable for Ender 3/ Ender 3 Pro/Ender 3X-3Pcs
Asin: B08BJXW1MK
One-Piece Plug Design, Easy To Install, Hard To Snap, Convenient To Plug Or Release..
After-Sales Guarantee: Each One Defective Item Can Have The Free Replace Or Refund, If Need Further Please Fell Free To Email Or Qa Us, We And Our Engineers Are Very Happy To Assist You..
Packaging Includes：1 X X/E Axis Cable,1 X Y Axis Cable,1 X Z Axis Cable,.
Total Cable Length：X/E Axis: About 790Mm/31Inch(The Longest Terminal About 900Mm/35.4Inch),Y Axis:About 400Mm/15.7Inch, Z Axis: About 300Mm/11.8Inch..
Features
- Ender 3 stepper motor cable, Compatible with Ender 3 / Ender 3 Pro/Ender 3X Printer Limit Switch
- Total cable length X/E Axis: about 790mm/31inch(the longest terminal about 900mm/35.4inch),Y Axis:about 400mm/15.7inch, Z Axis: about 300mm/11.8inch.
- One-piece plug design, easy to install, hard to snap, convenient to plug or release.
- Packaging includes 1 x X/E Axis Cable,1 x Y Axis Cable,1 x Z Axis Cable,
- After-sales Guarantee: each one defective item can have the free replace or refund, If need further please fell free to email or QA us, we and our engineers are very happy to assist you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Weight: 0.22 pounds
See On Amazon #5
Box3D 3D printer direct drive stepper motor extension cable for Ender 3 Ender 3 Pro Ender 3 V2 Ender 5 plus pvoxelab Aquila 3 pcs x 05m
Asin: B0B3Y4MHYN | Model: Box3D003 | PartNumber: Box3D003 | Ean: 0785034120510 | UPC: 785034120510
Brand: Box3D | Manufacturer: Box3D
See On Amazon #6
Official Creality 3D Printer Ender-3 S1 Cable Combination Package Screen Cable,Flat Cable and Motor Limit Cable 3D Printer Accessories
Asin: B0C1RSXX8H | Ean: 0850063141123 | UPC: 850063141123
Direct Replacement, Creality Original Wiring, Interface And Length Are Completely Consistent. Easily Insert Into The Port On The Machine, Completely Fitting.
Only Fit For Ender 3 S1 3D Printer.
Features
- Ender-3 S1 Cable Combination Package: 1*Screen Cable, 1*Flat Cable, 1*X Axis Motor Limit Cable, 1*Y Axis Motor Limit Cable.
- Only fit for Ender 3 S1 3D Printer
- Direct replacement, Creality original wiring, interface and length are completely consistent. Easily insert into the port on the machine, completely fitting
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #7
3D Printer Stepper Motor Extension Cable Extruder Motor Extended Cable and Ender3 V2 CR10 100cm Length 3D Printer Stepper Motor Extension Cable Extruder Motor Extended Cable and Ender3 V2 CR10 100cm
Asin: B0CQ4MMNHT | Ean: 0792483734564 | UPC: 792483734564
Brand: Sluswallow | Manufacturer: Sluswallow
See On Amazon #8
R REIFENG 4pcs 2M Motor Connector Cables XH2.54 4pin to XH2.0 6pin White Terminal Paralled Motor Wires for 3D Printer Stepper Motor Extension Cable
Asin: B07SLPLPL2 | Ean: 6934596032319
★High Quality For Durable And Long-Lasting Use..
★Suitable For 3D Printer Stepper Motor..
★Lightweight For Portable Installation..
★Length:2M/6.56Ft,Specification: Xh2.54 4 Pin To 6 Pin,Female White Terminal.
Features
- 2M 3D Printer Stepper Motor Cable Connector Line
- Length:2M/6.56ft,Specification: XH2.54 4 pin to 6 pin,Female White Terminal
- High quality for durable and long-lasting use.
- Lightweight for portable installation.
- Suitable for 3D Printer stepper motor.
- See more on Amazon...
Brand: R REIFENG | Manufacturer: WJ-61KL
See On Amazon #9
mankk 3D Printer X & Y & Z Endstop Accessory Cables Line for Ender 3 / Ender 3X / Ender 3 Pro/Ender 3 Prox CR-10 10S M-069-XYZ
Asin: B099ZPH6M6 | Model: CAA-M-069-XYZ | PartNumber: CAA-M-069-XYZ
【Cable Length】X： Axis:800Mm/31.5"，Y ：Axis:400Mm/15.7"，Z Axis:300Mm/11.8".
【Buy With Confidence 】For Your Best Choices,The Most Comfortable Goods Ever Have.If You Have Any Questions, Please Contact Us In Time And We Will Help You Solve Them..
【Type】Main Colour: Black; Material: Metal + Plastic.
【Design】One-Piece Plug Design, Easy To Install, Hard To Snap, Convenient To Plug Or Release.Suitable For 3D Printers.
Features
- Packaging includes 1 x X Axis Cable,1 x Y Axis Cable,1 x Z Axis Cable
- Design One-piece plug design, easy to install, hard to snap, convenient to plug or release.Suitable for 3D printers
- Cable length X Axis:800mm/31.5 Y Axis:400mm/15.7 Z Axis:300mm/11.8
- Type Main colour: black; Material: Metal + plastic
- Buy with confidence For your best choices,the most comfortable goods ever have.If you have any questions, please contact us in time and we will help you solve them.
- See more on Amazon...
Brand: mankk | Manufacturer: mankk
Dimensions: 1.00 x 6.00 x 5.00 inches
See On Amazon #10
RuiLing 4PCS 1.5M 59 Inch Stepper Motor Cables Lead Wire HX2.54 4 Pin to 6 Pin
Asin: B07QHTG82K | Model: SMCABLE-1.5M-4 | PartNumber: SMCABLE-1.5M-4 | Ean: 0713871351392 | UPC: 713871351392
It Is Compatible With Many Stepper Models..
4 Pin Dupont Connector Of The Driver Side, Compatible With Ramps Board And Other..
Equipped With Two Connectors..
Made Of High Quality Material, It Is Durable And Long Lasting Use..
Features
- Size: About 150 * 0.5 * 0.2cm/59 * 0.2 * 0.09inch(L*W*H);
- Made of high quality material, it is durable and long lasting use.
- It is compatible with many stepper models.
- Equipped with two connectors.
- 4 pin dupont connector of the driver side, compatible with RAMPS board and other.
- See more on Amazon...
Brand: RuiLing | Manufacturer: RuiLing
See On Amazon #11
FYSETC Ender 5 Plus Stepper Motor Extension Cable - Not Replace for Original Limit Swtich Wire: X Y E Dual Z-axis Connection Extend Part Easy Connect for 3D Printer Ender 5 Pro Nema 17 Stepper Motor
Asin: B09XQVDWCW
3. Easy Installation: Connect The Male Terminals On This Extension Cable With The Factory Stepper Motor & Limit Swtich Cable, Then The Other Female Ends Of This Extending Wire For The Endstop Pcb Board Or Controller Motherboard. Attach Them To The Gantry Kit To Route Properly For A Clean Look And Safe Operation. You Can Peel Each Piece Into 2 Cables To Get A Separate Motor Extension Cable And A Limit Switch Extension Cable..
5. Note: We Only Test This Extension Cable Set On Ender 5 Series, Not On Ender 3 Or Ender 3 Pro. If Need Other 3D Printer Part For Ender 5 Or Plus, Such As 235X235 Build Plate, 377X370 Spring Steel Sheet, Or Ender 5 Plus Hotbed Heater Mat, Please Go To Our Shop..
4. High Quality: Well Made, Oem Quality, Nicely Tucked Wires And Not In Harness Way. One-Piece Plug Design, Easy To Install, Hard To Snap, Convenient To Plug Or Release..
2.Cable's Length(Including The Connectors)：X Axis:650Mm/25.59In，Y Axis:650Mm/25.59In，Dual Z Axis:320Mm/12.59In, E Axis: 520Mm/ 20.47Inch. To Meet The Need Of Enlarge Room When Assembly. If The Length Is Still Not Long Enough For Your 3D Printing Project, Please Feel Free To Mail Us. We Can Provide You The Suitable One..
Features
- 1.Upgrade FDM 3D Printer Accessory: YES, this cable set is Much shorter than the stock one. NOT Drop-in Replacement, Just Used for Extending connection, Must be installed with the factory cables. Package Content: 1 Set Ender 5 - Ender 5 Pro -Ender 5 Plus Stepper Motor limit switch Connection Extension Cable for X Y Z Extruder. Each piece clearly marked for an axis with connectors, the extra Z axis extension is to respond to some customers' voice for Ender 5 Plus Dual Z motor.
- 2.Cable's length(including the connectors) X Axis:650mm/25.59in Y Axis:650mm/25.59in Dual Z Axis:320mm/12.59in, E axis: 520mm/ 20.47inch. To meet the need of enlarge room when assembly. If the length is still not long enough for your 3d printing project, please feel free to mail us. We can provide you the suitable one.
- 3. Easy Installation: Connect the Male Terminals on this extension cable with the factory Stepper Motor & Limit Swtich cable, then the other Female Ends of this extending wire for the endstop pcb board or controller motherboard. Attach them to the gantry kit to route properly for a clean look and safe operation. You can peel each piece into 2 cables to get a separate motor extension cable and a limit switch extension cable.
- 4. High Quality: Well made, OEM quality, Nicely tucked wires and not in harness way. One-piece plug design, easy to install, hard to snap, convenient to plug or release.
- 5. Note: We only test this extension cable set on Ender 5 series, not on ender 3 or ender 3 pro. If need other 3d printer part for ender 5 or plus, such as 235x235 build plate, 377x370 spring steel sheet, or ender 5 plus hotbed heater mat, please go to our shop.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #12
Alinan 5pcs 1M Motor Cables XH2.54 Double-Ended White Terminal Stepper Motor Cable 4pin-6pin for 3D Printer Stepper Motor Extension Cable
Asin: B09PZZWY1T | Model: Alinan | PartNumber: Alinan | Ean: 0701715512207 | UPC: 701715512207
★Suitable For 3D Printer Stepper Motor..
【Length】: 6.56Ft, Specification: Xh2.54 4 Pin To 6 Pin, Female White Terminal.
★3D Printer Stepper Motor Cable Connector Line.
★Lightweight For Portable Installation..
Features
- High quality for durable and long-lasting use.
- Lightweight for portable installation.
- Suitable for 3D Printer stepper motor.
- 3D Printer Stepper Motor Cable Connector Line
- Length : 6.56ft, Specification: XH2.54 4 pin to 6 pin, Female White Terminal
- See more on Amazon...
Brand: Alinan | Manufacturer: Alinan
See On Amazon #13
Official Creality Ender 3 S1 Cables Combination Package, Original Replacement Cable Wiring of Screen Cable, Flat Cable and X/Y Axis Motor Limit Cable 3D Printer Accessories Cable
Asin: B0C8HP6TRK
Only Fit For Ender 3 S1 3D Printer..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Packaging Includes】Pack Of 4: 1*Screen Cable, 1*Flat Cable, 1*X Axis Motor Limit Cable, 1*Y Axis Motor Limit Cable..
【Material】 Metal + Plastic.
Features
- Original Replacement Direct replacement, original wiring, interface and length are completely consistent. Easily insert into the port on the machine, completely fitting.
- Material Metal + plastic
- Only fit for Ender 3 S1 3D Printer.
- Packaging includes Pack of 4: 1*Screen Cable, 1*Flat Cable, 1*X Axis Motor Limit Cable, 1*Y Axis Motor Limit Cable.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #14
Official Creality 10 Pin Flexible Flat Ribbon Cable for LCD Screen Cable 3D Printer Ender 3 Ender 3 Pro Ender 5 Reprap Mendel Prusa I3 Soft Wire
Asin: B07VPF61RQ | Model: CR-Screen Cable-2 | PartNumber: CR-Screen Cable-2 | Ean: 0796862078829 | UPC: 796862078829
10 Pins Connector Flat Ribbon Cable.
Suitable For Internal Wiring In Office Equipment, Audio And Video Machines.
Easily And Directly Inserted Into Pcb.
Usage: 3D Printer Screen.
Features
- Main Materials: Plastic
- Usage: 3D Printer Screen
- 10 Pins Connector Flat Ribbon Cable
- Easily and directly inserted into PCB
- Suitable for internal wiring in office equipment, audio and video machines
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #15
OCTSEPCY 6pcs/lot 3D Printer Parts 1M XH2.54 3PIN Cable Endstop Mechanical Limit Optical Switch Connection Wire
Asin: B0B6FHZLLF | Model: GJ-002 | PartNumber: GJ-002
Length:1M/3.3Ft.
Useful For 3D Printer Accessory.
For Connecting Wires Between Electronic Components And Motherboard..
3Pin Xh2.54Copper Connecting Wire,Faster Conduction,Stable Performance,Longer Life.
Features
- High Quality Copper Connecting Wire
- 3pin XH2.54Copper Connecting Wire,Faster conduction,Stable performance,Longer life
- Length:1M/3.3ft
- For connecting wires between electronic components and motherboard.
- Useful for 3D printer accessory
- See more on Amazon...
Brand: OCTSEPCY | Manufacturer: OCTSEPCY
See On Amazon #16
Creativity 3D Printer Parts Ender 3 Stepper Motor Cable X & Y & Z Axis Stepper Motor and Limited Switch Endstop Cable for Ender 3/ Ender 3 Pro/Ender 3X/ Ender 3S
Asin: B0BXL69MLM | Model: Limit Line | PartNumber: Limit Line | Ean: 8686254965924
【Cable Parameter】: X Axis: 900Mm，Y Axis: 500Mm，Z Axis: 300Mm..
【Commitment】: We Are Responsable For Our Every Product, If You Received Desfective Or Did Not Work Well, Please Feel Free To Contact Us, And We Will Reply To You Within 24 Hours..
【Easy To Use】:Limit Switch Connecting Cable Is Very Small And Light, With Three Limit Switches And Three Motor Cables, Very Convenient For You. Compatible With Ender 3 / Ender 3 Pro/Ender 3X Printer Limit Switch..
【Packaging Includes】: 1 X X Axis Cable,1 X Y Axis Cable,1 X Z Axis Cable..
Features
- High-quality Materials X Y Z Limit Switch Wire 3D Printer Accessories Cable is made of high quality material, One-piece plug design, easy to install, hard to snap, convenient to plug or release.
- Packaging Includes : 1 x X Axis Cable,1 x Y Axis Cable,1 x Z Axis Cable.
- Cable Parameter : X Axis: 900mm Y Axis: 500mm Z Axis: 300mm.
- Easy to Use :Limit switch connecting cable is very small and light, with three limit switches and three motor cables, very convenient for you. Compatible with ender 3 / ender 3 Pro/ender 3X printer limit switch.
- Commitment : We are responsable for our every product, if you received desfective or did not work well, please feel free to contact us, and we will reply to you within 24 hours.
- See more on Amazon...
Brand: Creativity | Manufacturer: Creativity
See On Amazon #17
Creality 3D Printer X Y Z Axis Stepper Motor and Limited Switch Endstop Cable for Ender 3 Ender 3 Pro (Pack of 3)
Asin: B07SYJQFKR | Ean: 0796862079062 | UPC: 796862079062
Suitable For Ender 3 Ender 3 Pro.
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #18
FYSETC 3D Printer Vorn 2.4 Stepper Motor Extension Cables 2PCS : XH2.54-4P 2M/78.7inch Female 4P to Male 4P Motor Extension Wire White Terminal Connector Cable for Voro 2.4 3D Printer Accessories
Asin: B098J4MM3G
Cable Length:2M/78.7Inch, High Quality And Durable, Lightweight For Portable Installation..
After Sales Guarantee: Each One Desfective Item Can Have The Free Replace Or Refund, Need More Help Please Feel Free To Email Or Qa Us, We Will Try Our Best To Serve You..
Package Includes: 2 X 2M Stepper Cables, Female 4 Pin To Male 4 Pin,Xh2.54..
Specially Designed For Vorn 2.4 3D Printer Stepper Motor, Extended Motor Cables, Convenient. Not Suitable For Other Kind Printers..
Features
- PTFE XH2.54 4 Pin to 4Pin stepping motor cable, Length 2m. For the momnet it's compatible with Voron2.4 3D printers Only, printing quality improved, high working stability, long time printing without interruption. Please double check your stock cable before ordering to avoid wrong buy.
- Specially designed for Vorn 2.4 3D printer stepper motor, extended motor cables, convenient. Not suitable for other kind printers.
- Cable length:2M/78.7inch, high quality and durable, lightweight for portable installation.
- Package includes: 2 x 2M stepper cables, Female 4 Pin to Male 4 Pin,XH2.54.
- After Sales Guarantee: each one desfective item can have the free replace or refund, need more help please feel free to email or QA us, we will try our best to serve you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #19
3Pcs 1.5M Stepper Motor Cables Lead Wire HX2.54 4 Pin to 6 Pin, Stepper Motor Wires 1.5M Use for 3D Printer Nema 17 Stepper Motor,
Asin: B0CRDXNWMZ
3D Printer Motor Cables Made Of High Quality Material, It Is Durable And Long Lasting Use..
Tips:These Are "Generic" Motor Cables And Need To Be Checked And Possibly Re-Pinned To Suit Individual Needs. Not All Motors Are Wired The Same, So It's A Easy Fix To Re-Arrange The Pins In The Connectors. The Cables Are Well Made And The End Connectors Are Put Together Well. Just Make Sure The Crossover Wires Match Your Motor..
3D Printer Stepper Motor Cables Compatible With Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5 Pro 3D Printer Stepper Motor，Etc..
Lenght:1.0 Meter Stepper Motor Cable, Equipped With Two Connectors. 4Pin Xh 2.54 Connect With The Mainboard, 6Pin Ph 2.0 Connect With The Motor..
Features
- Package Included: 3Pcs 1.5M XH2.54 Dupont 4pin to 6pin Terminal Stepper Motor Cables for 3D Printer Nema 17 Stepper Motor.
- Lenght:1.0 meter stepper motor cable, Equipped with two connectors. 4pin XH 2.54 connect with the mainboard, 6pin PH 2.0 connect with the motor.
- 3D Printer Motor Cables Made of High quality material, it is durable and long lasting use.
- 3D Printer Stepper Motor Cables Compatible with Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5 Pro 3D Printer Stepper Motor etc.
- TIPS:These are generic motor cables and need to be checked and possibly re-pinned to suit individual needs. Not all motors are wired the same, so it's a easy fix to re-arrange the pins in the connectors. The cables are well made and the end connectors are put together well. Just make sure the crossover wires match your motor.
- See more on Amazon...
Brand: TIEXYE | Manufacturer: TIEXYE
See On Amazon #20
TIEXYE 3D Printer Stepper Motor Cable XH2.54 4Pin to 6Pin Terminal Motor Wires, Ender 3 Stepper Motor Cables, 4 Pin to 6 Pin Stepper Motor Wire for 3D Printer Nema 17 Stepper Motor, 4 Pcs 1M
Asin: B0CMQN8L5R | Model: T-Stepper Motor Cables-4P | PartNumber: T-Stepper Motor Cables-4P
3D Printer Stepper Motor Wires Made Of High Quality Material, It Is Durable And Long Lasting Use..
3D Printer Stepper Motor Cables 1000M Compatible With 3D Printer Stepper Motors..
Lenght:1.0 Meter Stepper Motor Cable, Equipped With Two Connectors. 4Pin Xh 2.54 Connect With The Mainboard, 6Pin Ph 2.0 Connect With The Motor..
Features
- Package Included: 4Pcs 1M XH2.54 Dupont 4pin to 6pin Terminal Stepper Motor Cables for 3D Printer Nema 17 Stepper Motor. 3D Printer Stepper Motor Cable 4 Pin to 6 Pin 1000mm,
- Lenght:1.0 meter stepper motor cable, Equipped with two connectors. 4pin XH 2.54 connect with the mainboard, 6pin PH 2.0 connect with the motor.
- 3D Printer Stepper Motor Wires Made of High quality material, it is durable and long lasting use.
- 3D Printer Stepper Motor Cables 1000m Compatible with 3D Printer Stepper Motors.
- See more on Amazon...
Brand: TIEXYE | Manufacturer: TIEXYE
See On Amazon
Looking For Something Else?
Search