HEATIT HTM End seal
Asin: B07VJLZW4L | Ean: 6947881509991
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Firmly Pushing, Put The Cable Into End Seal All The Way (3/4 Inch At Least)..
To Avoid The Short Circuits, Never Twist The Wires Inside The Heatit Htm Cable Together And Never Allow The Wires To Touch Each Other Or The Outer Braid. Keep Braid Out Of The Cap..
Some Gel May Ooze Out. Don’T Attempt To Wipe Off. Don’T Reuse And End Seal..
Please Check The Attached Installation Guide.
Features
- Gel filled end seal for use with HEATIT HTM self regulating heating. 5 end seals included.
- Please check the attached installation guide
- Firmly pushing, put the cable into end seal all the way (3/4 inch at least).
- Some gel may ooze out. Don t attempt to wipe off. Don t reuse and end seal.
- To avoid the short circuits, Never twist the wires inside the HEATIT HTM cable together and never allow the wires to touch each other or the outer braid. Keep braid out of the cap.
- See more on Amazon...
Brand: HEATIT | Manufacturer: Zhukeshi
See On Amazon Similar To HEATIT HTM End seal
#1
Domecka 200PCS Waterproof Heat Shrink End Caps tubing, Electrical Wire Cable Wrap Marine Grade Sealed Heat shrinkable tubing, Adhesive Lined Tube Insulation Seal Heat-shrinkable Cap Tubes Kit with Box
Asin: B091TM4B29 | Model: DM-F200 | PartNumber: DM-F200 | Ean: 6969023298259
The End Caps Tubing Is Used To Connect The Ends Of Multiple Wires. It Contains A Lot Of Glue. It Can Completely Wrap The Wires After The Glue Overflows After Heating With A Hot Air Gun. It Has A Strong Airtightness And Can Be Professionally Connected In A Few Seconds..
Friendly After-Service - We Have A Commitment To Every Buyer 100% Satisfaction. Please Don't Hesitate To Contact Us If You Are Not Satisfied With Your Purchase. We Would Try Our Best To Assist You And Ensure Your Satisfaction.
The Heat-Shrinkable Cap Made Of High-Quality Polyolefin Material Has The Advantages Of Good Electrical Insulation, High Strength And Toughness, Good Sealing And Corrosion Resistance, High Temperature Resistance, Not Easy To Break And Long Service Life..
Features
- This combination has three sizes of end caps tube heat shrinkable tube for you to choose from. The heat shrinkable tube is lined with insulating glue, which has good electrical insulation, good sealing, corrosion resistance and high temperature resistance.
- The heat-shrinkable cap made of high-quality polyolefin material has the advantages of good electrical insulation, high strength and toughness, good sealing and corrosion resistance, high temperature resistance, not easy to break and long service life.
- The end caps tubing is used to connect the ends of multiple wires. It contains a lot of glue. It can completely wrap the wires after the glue overflows after heating with a hot air gun. It has a strong airtightness and can be professionally connected in a few seconds.
- Friendly after-service - We have a commitment to every buyer 100% satisfaction. Please don't hesitate to contact us if you are not satisfied with your purchase. We would try our best to assist you and ensure your satisfaction
- See more on Amazon...
Brand: Domecka
Dimensions: 1.37 x 7.67 x 5.11 inches
See On Amazon #2
BuyHeatShrink 2 INCH Heat Shrink END Cap for 1.5" Rope
Asin: B00FDVE3GI
Hot Melt Glue On The Inside.
Use A Heat Gun, Not A Hairdryer.
Start Shrinking From The Closed End And Work Your Way Out.
You Will Get A Pair (2) Of End Caps.
Features
- 2" heat shrink end cap will shrink down as far as 1"
- You will get a pair (2) of end caps
- hot melt glue on the inside
- Start shrinking from the closed end and work your way out
- use a Heat gun, not a hairdryer
- See more on Amazon...
Brand: BuyHeatShrink | Manufacturer: BuyHeatShrink
See On Amazon #3
Domecka 420PCS Waterproof Heat Shrink End Caps Tubing, Wire Shrink Wrap Tubing, Electrical Wire Cable Wrap Marine Grade Sealed Heat Shrinkable Tubing, Adhesive Lined Tube Seal Heat-shrinkable Cap
Asin: B09JC5WFNV | Ean: 6969023298051
The End Caps Tubing Is Used To Connect The Ends Of Multiple Wires. It Contains A Lot Of Glue. It Can Completely Wrap The Wires After The Glue Overflows After Heating With A Hot Air Gun. It Has A Strong Airtightness And Can Be Professionally Connected In A Few Seconds..
Friendly After-Service - We Have A Commitment To Every Buyer 100% Satisfaction. Please Don't Hesitate To Contact Us If You Are Not Satisfied With Your Purchase. We Would Try Our Best To Assist You And Ensure Your Satisfaction.
This Kit Box Combination Is Equipped With More Large-Size Heat Shrinkable End Caps To Make It Easier For Your Wires To Connect. There Are 210 Pcs Of End Caps With An Inner Diameter Of 0.24 Inches, 150 Pcs Of End Caps With An Inner Diameter Of 0.32 Inches And 60 Pcs Of End Caps With An Inner Diameter Of 0.44 Inches,.
The Heat-Shrinkable Cap Made Of High-Quality Polyolefin Material Has The Advantages Of Good Electrical Insulation, High Strength And Toughness, Good Sealing And Corrosion Resistance, High Temperature Resistance, Not Easy To Break And Long Service Life..
Features
- This combination has three sizes of end caps tube heat shrinkable tube for you to choose from. The heat shrinkable tube is lined with insulating glue, which has good electrical insulation, good sealing, corrosion resistance and high temperature resistance
- The heat-shrinkable cap made of high-quality polyolefin material has the advantages of good electrical insulation, high strength and toughness, good sealing and corrosion resistance, high temperature resistance, not easy to break and long service life.
- The end caps tubing is used to connect the ends of multiple wires. It contains a lot of glue. It can completely wrap the wires after the glue overflows after heating with a hot air gun. It has a strong airtightness and can be professionally connected in a few seconds.
- This kit box combination is equipped with more large-size heat shrinkable end caps to make it easier for your wires to connect. There are 210 pcs of end caps with an inner diameter of 0.24 inches, 150 pcs of end caps with an inner diameter of 0.32 inches and 60 pcs of end caps with an inner diameter of 0.44 inches,
- Friendly after-service - We have a commitment to every buyer 100% satisfaction. Please don't hesitate to contact us if you are not satisfied with your purchase. We would try our best to assist you and ensure your satisfaction
- See more on Amazon...
Brand: Domecka | Manufacturer: Domecka
See On Amazon #4
1/2" Heat Shrink End Cap - 10 Pieces - Black
Asin: B00ZYTQ4DO | Model: HSEC-050-10 | PartNumber: HSEC-050-10
Dual Wall End Cap, With Internal Wall Of Hot-Melt Adhesive Provides Excellent Bonding To Plastic And Metals..
Order Is For 10 Pieces.
Shrink Temperature Of 120-135 °C.
3:1 Shrink Ratio - Shrinks To A 1/3 Of Its Size.
Features
- Size: 1/2" | ID before Shrinking: 0.55" | ID after Shrinking: 0.18"
- 3:1 Shrink Ratio - Shrinks to a 1/3 of its size
- Dual wall end cap, with internal wall of hot-melt adhesive provides excellent bonding to plastic and metals.
- Shrink temperature of 120-135 C
- Order is for 10 Pieces
- See more on Amazon...
Brand: Electriduct | Manufacturer: Electriduct
Dimensions: 50.00 x 100.00 x 100.00 Centimeters | Weight: 0.01 Pounds
See On Amazon #5
Domecka 40pcs Sealed Insulation Heat Shrink Solder Closed End Wire Connector-Waterproof Cap Solder Terminal Sleeve Wire Connector
Asin: B091TPB53Y | Model: DM-H40 | PartNumber: DM-H40 | Ean: 6969023298266
The Product Uses High-Quality Pure Copper Springs With National Standard Thickness, Which Has Better Electrical Conductivity! More Stable! The Clever Square Spring Design Makes The Solder Very Easy To Penetrate When It Melts, Making The Wire Welding Stronger..
Friendly After-Service - We Have A Commitment To Every Buyer 100% Satisfaction. Please Don't Hesitate To Contact Us If You Are Not Satisfied With Your Purchase. We Would Try Our Best To Assist You And Ensure Your Satisfaction.
The Product Is Waterproof, Oil-Resistant, Environmentally Friendly, And Easy To Install. According To The Color Of The Glass Beads, Select The Solder Ring Cap Corresponding To The Wire Gauge, And Heat Shrinkable With A Hot Air Gun..
It Is Used To Seal The Ends Of Multi-Strand Wires, Transparent And Safe To See, To Ensure That The Wires Are Not Exposed, To Avoid Arcing, Combined With Waterproofing, Clamp Fixation And Solder-Welded Multi-Stranded Wire Solder Sealed Connection..
Features
- The product is composed of a glass bead containing environmentally friendly baking varnish with colored glass, a square copper wire tower spring, a solder ring, a hot melt adhesive ring and a heat shrinkable tube. The high temperature tube is resistant to high temperature of 175 , and contains a large amount of glue. The welding is firm and tight. good.
- It is used to seal the ends of multi-strand wires, transparent and safe to see, to ensure that the wires are not exposed, to avoid arcing, combined with waterproofing, clamp fixation and solder-welded multi-stranded wire solder sealed connection.
- The product uses high-quality pure copper springs with national standard thickness, which has better electrical conductivity! more stable! The clever square spring design makes the solder very easy to penetrate when it melts, making the wire welding stronger.
- The product is waterproof, oil-resistant, environmentally friendly, and easy to install. According to the color of the glass beads, select the solder ring cap corresponding to the wire gauge, and heat shrinkable with a hot air gun.
- Friendly after-service - We have a commitment to every buyer 100% satisfaction. Please don't hesitate to contact us if you are not satisfied with your purchase. We would try our best to assist you and ensure your satisfaction
- See more on Amazon...
Brand: Domecka | Manufacturer: Domecka
Dimensions: 0.68 x 66.12 x 2.95 inches
See On Amazon #6
1" Heat Shrink End Cap - 10 Pieces - Black
Asin: B00ZYTQ7A4 | Model: 4330219558 | PartNumber: 4330219558
Brand: Electriduct | Manufacturer: Electriduct
Dimensions: 50.00 x 100.00 x 100.00 Centimeters | Weight: 0.02 pounds
See On Amazon #7
HEATIT HTM Accessory Connection kit
Asin: B07T5KZNXJ | Ean: 6947881522204
For Plastic & Metal Pipes Only In Dry Location.
2 1/2 Feet Length Grounded Clod Lead For Electrical Power Connection. 2 Cable Ties, 1 End Seal, Warning Labels And Instruction Manual Are Included..
Power Plug With Indicator Light .Ul Approved Built In Fast Reaction Fuse..
Supports Up To 75 Feet Heatit Htm Self Regulating Heating Cable. Max Output: 600Watt..
Features
- The kit was ETL approved. Used with HEATIT HTM self regulating heating cable system or other major brand similar size self regulating heating cable connection.
- Supports Up To 75 feet HEATIT HTM self regulating heating Cable. Max output: 600Watt.
- For Plastic & Metal Pipes only in dry location
- Power plug with Indicator Light .UL approved built In Fast Reaction Fuse.
- 2 1/2 feet length grounded clod lead for electrical power connection. 2 cable ties, 1 end seal, warning labels and instruction manual are included.
- See more on Amazon...
Brand: HEATIT | Manufacturer: Zhukeshi
Weight: 0.40 pounds
See On Amazon #8
3M Cold Shrink End Cap EC-2, use range of 0.63-1.18 in (15,9-30,1 mm)
Asin: B00JR8JZB6 | Model: 80611455199 | PartNumber: 80611455199 | Ean: 0051128583890 | UPC: 051128583890
Moisture Sealing And Provides Physical Protection For Cables And Pipes.
Simple And Fast Installation Without Any Tools.
Rohs 2011/65/Eu Compliant.
Made Of Epdm Rubber Which Contains No Chlorides Or Sulfur.
Resists Water, Alkalis, Acids, Abrasion And Ozone.
Features
- Close-ended, EPDM tubular rubber sleeves that are loaded onto a removable core
- Resists water, alkalis, acids, abrasion and ozone
- Moisture sealing and provides physical protection for cables and pipes
- Made of EPDM rubber which contains no chlorides or sulfur
- Simple and fast installation without any tools
- RoHS 2011/65/EU Compliant
- See more on Amazon...
Brand: 3M | Manufacturer: 3M
Dimensions: 5.95 x 8.59 x 5.88 inches
See On Amazon #9
EASY HEAT TV109374 5PK Gel End Cap
Asin: B000BQPCII | Model: TV109374 | PartNumber: TV109374 | Ean: 0013627069466 | UPC: 013627069466
The Product Is Manufactured In China.
The Product Is Highly Durable And Handle.
Features
- The produt is easy to use
- The product is highly durable and handle
- The product is manufactured in China
- See more on Amazon...
Brand: Easy Heat | Manufacturer: EASY HEAT INC
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.04 Pounds
See On Amazon #10
3/4" Heat Shrink End Cap - 10 Pieces - Black
Asin: B00ZYTQ5U6 | Model: HSEC-075-10 | PartNumber: HSEC-075-10
Brand: Electriduct | Manufacturer: Electriduct
Weight: 0.01 Pounds
See On Amazon #11
Heat Seal Circle CORE Adapter END Cap Heat Seal Brand
Asin: B07CRQTZVM
6110-023, 6110023.
The Above Described Parts Are Manufactured And/Or Supplied By National Band Saw Company As Replacement Parts For Equipment. National Band Saw Is Not Affiliated With Any Original Equipment Or Parts Manufacturers..
102A.
Features
- Heat Seal Parts
- 102A
- 6110-023, 6110023
- The above described parts are manufactured and/or supplied by National Band Saw Company as replacement parts for equipment. National Band Saw is not affiliated with any original equipment or parts manufacturers.
- See more on Amazon...
Brand: NBSLA | Manufacturer: NATIONAL BAND SAW
Weight: 0.05 pounds
See On Amazon #12
BuyHeatShrink 1-1/2" Adhesive Lined Heat Shrink End Cap (2 End Caps included)
Asin: B012YKSL68 | Ean: 0635414949647 | UPC: 635414949647
Forms Pressure-Tight Seal On Ends Of Communication And Power Cables.
Listing Is For 1 (One) 1.5" End Cap.
15 Kv/Mm (381 V/Mil) Minimum Electric Strength (E.G. 0.12"=120 Mil=45Kv).
Dual Wall End Cap, With Internal Wall Of Hot-Melt Adhesive Provides Excellent Bonding To Plastic And Metals..
Features
- Start shrinking from the closed end and work your way out
- Dual wall end cap, with internal wall of hot-melt adhesive provides excellent bonding to plastic and metals.
- Forms pressure-tight seal on ends of communication and power cables
- 15 kV/mm (381 V/mil) minimum electric strength (e.g. 0.12=120 mil=45kV)
- Listing is for 1 (one) 1.5 end cap
- See more on Amazon...
Brand: BuyHeatShrink | Manufacturer: BuyHeatShrink
See On Amazon #13
Electriduct Heat Shrink Breakout Boots 0.9" Core Diameter 2 Cores (1 Piece) Black
Asin: B00B4W2DMG
Minimum Shrink Temperature: 110°C | Max Voltage: 1000V.
Quantity 1 End Cap.
Operating Temperature Of -55° - 110° C.
3:1 Shrink Ratio - Shrinks To A 1/3 Of Its Size.
Features
- Boot Size: 0.9" | 2 Cores (Breakouts) | Core Size: 0.35"
- 3:1 Shrink Ratio - Shrinks to a 1/3 of its size
- Minimum shrink temperature: 110 C | Max Voltage: 1000V
- Operating Temperature of -55 - 110 C
- Quantity 1 End Cap
- See more on Amazon...
Brand: Electriduct | Manufacturer: Electriduct
Weight: 0.01 pounds
See On Amazon #14
Heat Seal Star CORE Adapter END Cap Threaded Heat Seal Brand Models 102A 104A 107A 112A 625A 625A Mini 825A 875A
Asin: B07CRRPPK1
Heat Seal Cap Star.
The Above Described Parts Are Manufactured And/Or Supplied By National Band Saw Company As Replacement Parts For Equipment. National Band Saw Is Not Affiliated With Any Original Equipment Or Parts Manufacturers..
Fits Model(S): 102A, 104A, 107A, 112A, 625A, 625A Mini, 825A, 875A, Sm-1, Sm-1-Lwrw.
6110-023, 6110023.
Features
- Heat Seal Parts
- 6110-023, 6110023
- HEAT SEAL CAP STAR
- Fits Model(s): 102A, 104A, 107A, 112A, 625A, 625A MINI, 825A, 875A, SM-1, SM-1-LWRW
- The above described parts are manufactured and/or supplied by National Band Saw Company as replacement parts for equipment. National Band Saw is not affiliated with any original equipment or parts manufacturers.
- See more on Amazon...
Brand: National Band Saw Company | Manufacturer: National Band Saw Company
Weight: 0.05 pounds
See On Amazon #15
NSI HSC-195 Heat-Shrinkable End Cap, 750-1500 MCM Conductor Size, 1.08-1.94 Primary Insulation Range
Asin: B00CUNMJVI | Model: HSC-195 | PartNumber: HSC-195 | Ean: 0662381014672 | UPC: 662381014672
Seals May Be Affected Over Lead, Steel, Aluminum, Copper And All Standard Plastic And Elastomeric Insulating Materials And Conduit.
1.05-1.95-Inches General Use Recovered Range.
These Caps Replace Greases, Tapes, Epoxy, Encapsulation, Or Dips.
Made Of Thermally Stabilized Polyolefin, The Interior Of The Hsc Is Coated With A Melt Able Sealant.
Features
- Heat-shrinkable end caps provide for efficient and positive cable end sealing
- Made of thermally stabilized polyolefin, the interior of the HSC is coated with a melt able sealant
- Seals may be affected over lead, steel, aluminum, copper and all standard plastic and elastomeric insulating materials and conduit
- These caps replace greases, tapes, epoxy, encapsulation, or dips
- 1.05-1.95-inches general use recovered range
- See more on Amazon...
Brand: NSI | Manufacturer: NSi Industries
Weight: 0.20 pounds
See On Amazon #16
Panduit HSEC1.0-X Heat Shrink Thick Adhesive End Cap (10-Pack)
Asin: B00JVWUMQK | Model: HSEC1.0-X | PartNumber: HSEC1.0-X | Ean: 0074983913312 | UPC: 074983913312
Cross-Linked Uv Resistant Material Improves Chemical And Temperature Resistance.
Minimum Shrink Temperature Is 248°F (120°C).
Hot Melt Adhesive Seals And Insulates In One Step To Speed Installation.
Shrink Ratio Of 2.5:1 Insulates A Wide Range Of Diameters And Irregular Shapes, Which Reduces Inventory Costs.
Features
- Applications include insulating and protecting wires and cables
- Shrink ratio of 2.5:1 insulates a wide range of diameters and irregular shapes, which reduces inventory costs
- Cross-linked UV resistant material improves chemical and temperature resistance
- Hot melt adhesive seals and insulates in one step to speed installation
- Minimum shrink temperature is 248 F (120 C)
- See more on Amazon...
Brand: Panduit | Manufacturer: Panduit
See On Amazon #17
Ideal Industries, Inc. 46-384 Heat Shrink End Cap
Asin: B008J0UIS2 | Model: 783250463848 | PartNumber: 783250463848 | Ean: 0783250463848 | UPC: 783250463848
Brand: Ideal Industries | Manufacturer: Ideal Industries
Dimensions: 2.00 x 3.00 x 1.00 inches | Weight: 0.15 pounds
See On Amazon
Looking For Something Else?
Search