DROK Delay Relay Module, DC 6-30V Timer Relay 12V 24V 0.01s-9999min 50mA Digital Timer Cycle Delay Switch Module AC 220V Power On-Off Controller with LCD Display Switch Button Case
Asin: B07VLXR7Z1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Independent Parameter --- Able To Set Different Op, Cl, Lop Parameters Which Are Independent And Saved Separately; Support Viewing Currently Set Parameters Without Affecting System Operation..
Note --- No Trigger Cable Or Connector Included, Need To Be Purchased Separately..
Other Features --- Clear Lcd Display; Support Uart Data Uploading And Parameter Setting; With Pause Button, Support One-Button Pause; With Automatically Sleep Mode; With Input Reverse Connection Protection; With Power-Off Auto Storage Function..
Trigger --- Support High Level Support, Low Level Trigger, Button Trigger Control, Switching Value Control, Available For Most Applications..
Features
- SPECIFICATION --- working voltage DC 6-30V; timing range 0.01s-9999mins continuously adjustable.
- TRIGGER --- support high level support, low level trigger, button trigger control, switching value control, available for most applications.
- INDEPENDENT PARAMETER --- able to set different OP, CL, LOP parameters which are independent and saved separately; support viewing currently set parameters without affecting system operation.
- OTHER FEATURES --- clear LCD display; support UART data uploading and parameter setting; with pause button, support one-button pause; with automatically sleep mode; with input reverse connection protection; with power-off auto storage function.
- NOTE --- no trigger cable or connector included, need to be purchased separately.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon Similar To DROK Delay Relay Module DC
#1
UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC Control, Industrial Control, Electronic Experiment, Arduino Robot
Asin: B07BT25J52 | Model: U6031 | PartNumber: U6031
Self Protection: Built With Protection Against Reversal Diode, Supports Anti-Reverse Protection. Note: Please Remove The Jumper Cap Of S5 When Controlling Ac Current Or Dc Current Voltages Other Than 12V, Otherwise The Module Will Be Burned Or Will Not Work Properly..
Applications: This Module Works As A Switch With Time Delay On And Off Function, Highly Recommended For Automotive Circuit Modification, And Led Lights, Dc Motors, Pump And Smart Home Control System..
Functions: Supports On Delay And Off Delay Modes, The Delay Time Can Be Adjusted From 0.1S To 1H, The Delay Mode And Delay Time Can Be Set By Shorting Or Opening The Jumper Pins And Rotating The Potentiometer..
Features
- Operating Voltage: DC 12V; Quiescent Current: 5.5mA; Max. Operating Current: 42mA; Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V; Max. Load Current: 10A
- Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer.
- Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly.
- Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.04 pounds
See On Amazon #2
KeeYees 5pcs 1 Channel 5V Relay Module Board Shield KY-019 LED Indicator for Arduino + 3pcs 20CM 10Pin Female Male Jumper Wires
Asin: B07L6J6FHH | Model: KYES504-KY019-5 | PartNumber: KYES504-KY019-5 | Ean: 0705883356380 | UPC: 705883356380
No Need To Buy The Jumper Wires Extra, This Set Contains 20Cm 10Pin Female To Female, Female To Male, Male To Male Dupont Jumper Wires, With Which You Can Easier To Complete The Project..
This Relay Can Be Used Not Only As A Microcontroller Development Board Module, But Also As A Home Appliance Controller..
Features
- The relay can directly control a variety of equipment and loads, which meets international safety standards, and also has power and relay indicators.
- This relay can be used not only as a microcontroller development board module, but also as a home appliance controller.
- No need to buy the Jumper Wires extra, this set contains 20cm 10Pin female to female, female to male, male to male Dupont Jumper Wires, with which you can easier to complete the project.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #3
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
Asin: B00LW15A4W | Model: 3-01-0340 | PartNumber: 3-01-0340 | Ean: 0702082655948 | UPC: 702082655948
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)
Asin: B07XGZSYJV | Model: RK-S1B4-G97L | PartNumber: RK-S1B4-G97L | Ean: 0724545020568 | UPC: 724545020568
Optocoupler Isolator:3V/3.3V Power Relay Module Supports Photocoupler Isolation Control..
30Vdc 250Vac Load：The Power Switch Is Compatible With 10A 250Vac And 10A 30Vdc Load..
Features
- Original Songle Relay
- 30VDC 250VAC Load The power switch is compatible with 10A 250VAC and 10A 30VDC load.
- Optocoupler Isolator:3V/3.3V power relay module supports photocoupler isolation control.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.79 x 2.76 x 0.67 Inches | Weight: 0.00 Pounds
Warranty: no
See On Amazon #5
5v Relay Module 1 Channel Relay Board for Raspberry Pi with Opto-Isolated High or Low Level Trigger 5v 1 Channel Relay Switch for Arduino
Asin: B09G6H7JDT | Ean: 0734914033952 | UPC: 734914033952
【Adopted Smd Optocoupler Isolation& Jumper Set】- The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.The Module Has A Jumper So You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
【Humanization Design On Interfaces】- All Interfaces Can Be Directly Wired Out Through The Terminals.Fault-Tolerant Design;Fault-Tolerant Design,Even If The Control Line Is Broken, The Relay Will Not Operate..
【Wide Application】-These 5V Relay Board Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
【Main Specification】- Peak Load Of No Connector: Ac125~250V/10A, Dc28~30V/10A; Trigger Current: 5Ma;The Module Operating Voltage:12V; 4Pcs * 3.1 Mm Fixed Bolt Hole..
Features
- 5V 1 Channel Relay Module - This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller.
- Main Specification - Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A; Trigger Current: 5mA;The Module Operating Voltage:12V; 4pcs * 3.1 mm Fixed Bolt Hole.
- Adopted SMD Optocoupler Isolation& jumper Set - The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input; Coil +, coil - and trigger.
- Wide Application -These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc.
- Humanization Design On Interfaces - All interfaces can be directly wired out through the terminals.Fault-tolerant design;fault-tolerant design,even if the control line is broken, the relay will not operate.
- See more on Amazon...
Brand: AZKO | Manufacturer: AZKO
Dimensions: 0.10 x 0.10 x 0.10 Inches
See On Amazon #6
HiLetgo 2pcs DC 12V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level Trigger Module Triggered by DC 12V
Asin: B00LW15F42 | Model: 3-01-0342 | PartNumber: 3-01-0342 | Ean: 0702082655962 | UPC: 702082655962
The Module Can Be High Or Low By A Jumper Setting Trigger;.
Fault-Tolerant Design , Even If The Control Line Is Broken , The Relay Will Not Operate ;.
Interface Design Humane, All Interfaces Can Be Connected Directly Via Terminal Wiring Leads , Very Convenient ;.
With Patch Optical Isolation, Strong Drive Ability And Stable Performance;.
Features
- Can set high or low level trigger with jumper, to meet the demand of more trigger applications;
- With patch optical isolation, strong drive ability and stable performance;
- The module can be high or low by a jumper setting trigger;
- Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient ;
- Fault-tolerant design , even if the control line is broken , the relay will not operate ;
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.72 x 2.00 x 1.60 inches | Weight: 0.11 pounds
See On Amazon #7
HiLetgo 12V 1 Channel Relay Module with Optocoupler Isolation Support High or Low Level Trigger
Asin: B00LW15D1M | Model: 3-01-0341 | PartNumber: 3-01-0341 | Ean: 0702082655955 | UPC: 702082655955
Module Can Be Set By Jumper High Or Low Trigger.
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient.
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move.
Using Optocoupler Chip Isolation, Strong Drive Capability, Stable Performance; Trigger Current 5Ma.
Features
- Module uses genuine high quality relay, normally open interface maximum load: AC 250V / 10A, DC 30V / 10A
- Using optocoupler chip isolation, strong drive capability, stable performance; trigger current 5mA
- Module can be set by jumper high or low trigger
- Fault-tolerant design, even if the control line is broken, the relay will not move
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
[2 Pack] DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LED Display / 5V Micro USB, Smart Home Controller
Asin: B085TL38NH | Model: VA-0190 | PartNumber: VA-0190 | Ean: 0722453988338 | UPC: 722453988338
【Reverse Protection】Built-In A Diode To Provide Protection Against Accidental Reverse Polarity For The Circuits..
【Parameter Setting】Op(Conduction Time) / Cl(Off Time) / Lop(Circuit Times) Can Be Set Individually, And The Parameters Are Mutually Independent. All Parameters Are Permanently Saved Once Set. The Functions And Parameters Can Be Reviewed Or Changed At A Later Time..
【Sleep Mode】If No Operation Within 5 Minutes, The Digital Tube Of The Relay Board Will Turn Off Automatically. Pressing Any Button Can Wake It Up..
【Load Range】Operating Voltage: Dc 6V - 30V, Support Micro Usb 5V Power Supply. High Level Trigger: 3V - 24V. No(Normally Open) Maximum Load < Ac 250V/10A, < Dc 30V/10A. Timing Range: 0.1S ~ 999Mins (Continuously Adjustable)..
Features
- Multifunction Timer Relay Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc.
- Load Range Operating voltage: DC 6V - 30V, support micro USB 5V power supply. High level trigger: 3V - 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable).
- Reverse Protection Built-in a diode to provide protection against accidental reverse polarity for the circuits.
- Sleep Mode If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up.
- Parameter Setting OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time.
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
Dimensions: 1.50 x 2.52 x 0.67 inches
See On Amazon #9
DROK 12 Volt Timer Relay, 0.1s to 999min 50mA 4-Mode On-Off Automotive Digital Delay Relay, Electric Delay Timer Switch, Cycle Time Delay Module with LED Display
Asin: B071XNY72Q | Model: 300473 | PartNumber: 300473
Features
- 4 MODE TIME DELAY RELAY: DROK 12V relay is provided with 4 different settings and supports various triggering signal source, like positive side of power supply triggering, Button, PNP sensor, PLC signal, which is available for most of applications.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #10
ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
Asin: B08PP8HXVD | Model: ANMBEST_MD314-319 | PartNumber: ANMBEST_MD314-319 | Ean: 7903265708922
Reliable: Fault-Tolerant Design, Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation, Triggering More Reliable, More Stable..
High/Low Level Trigger Can Be Selected By Jumper. Very Versatile, You Can Reverse The Input Logic With The Jumper..
Easy To Install: Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
Equipped With High-Current Relay, Maximum Load: Ac250v 10A, 15A 125Vac, Dc30v 10A; Trigger Current Of Opto-Isolator: 5Ma..
Features
- It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
See On Amazon #11
SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board Compatible with Arduino R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi
Asin: B00E0NTPP4 | Model: 8541582329 | PartNumber: 8541582329 | Ean: 0520141421293 | UPC: 520141421293
Standard Interface That Can Be Controlled Directly By Microcontroller (Compatible With Arduino ,Raspberry Pi, 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic).
Size: 50.5Mm(L) X 38.5Mm(W) X 18.5Mm(H)(1.99Inch X 1.54Inch X 0.73Inch).
Indication Led's For Relay Output Status.
Equiped With High-Current Relay, Ac250v 10A ; Dc30v 10A.
Features
- 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equiped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (compatible with Arduino ,Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED's for Relay output status
- Size: 50.5mm(L) x 38.5mm(W) x 18.5mm(H)(1.99inch x 1.54inch x 0.73inch)
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.80 x 2.70 x 2.50 inches | Weight: 0.06 pounds
See On Amazon #12
DROK Timer Relay, Time Delay Relay DC 5V 12V 24V Delay Controller Board Delay-off Cycle Timer 0.01s-9999mins Trigger Delay Switching Relay Module with LCD Display Support Micro USB 5V Power Supply
Asin: B07DFT2WDS | Model: 200350 | PartNumber: 200350
Lcd Display: The Time Delay Relay Module Is Designed With Lcd Display, Can Clearly And Directly Show The Current Mode And Parameters.
Auto Save: All Setting Parameters Are Automatically Saved By Power-Fail.
Features
- Independent Parameters: OP/CL/LOP parameters can be modified and saved, and they are individual
- Auto Save: All setting parameters are automatically saved by power-fail
- LCD Display: the time delay relay module is designed with LCD display, can clearly and directly show the current mode and parameters
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
Weight: 0.00 pounds
See On Amazon #13
Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10
Asin: B07WQH63FB | Model: VA-0166 | PartNumber: VA-0166 | Ean: 0793118392173 | UPC: 793118392173
【Fault-Tolerant Design】The Relay Will Not Operate Even If The Control Line Is Disconnected..
【High Compatibility】The Relay Module Can Be Controlled Directly By 5V Logic Signals From Microcontroller(8051, Avr, Pic, Dsp, Arm, Raspberry Pi, Msp430, Ttl Logic Etc).
【Universal Interface】Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
【Load Range】No(Normally Open) Maximum Load < Ac 250V/10A, < Dc 30V/10A. Trigger Current Of Opto-Isolator: 5Ma..
Features
- Control Devices The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
- Load Range NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- Fault-tolerant Design The relay will not operate even if the control line is disconnected.
- Universal Interface Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High Compatibility The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
See On Amazon #14
GAEYAELE 16A Multifunction Time Relay with 10 Function Choices AC/DC12V-240V Relay(GRT8-M1,AC/DC12V-240V)
Asin: B07CH7KJ39 | Model: LE | PartNumber: LE | Ean: 0643845659356 | UPC: 643845659356
Time Range: The Time Scale Is 0.1S-10 Days, Divided Into 10 Ranges..
Product Size: Ultra-Small Size, Only 18Mm Width, 35Mm Rail Mounting..
Relay Status : Its Working Status Is Indicated By The Led Indicator..
Instructions: Comfortable And Well-Arranged Function And Time-Range Setting By Rotary Switches..
Features
- Special 10 Functions: 5 time functions are controlled by the power supply voltage, 4 time functions are controlled by the control input, and 1 latch relay function.
- Instructions: Comfortable and well-arranged function and time-range setting by rotary switches.
- Time range: The time scale is 0.1s-10 days, divided into 10 ranges.
- Relay Status : Its working status is indicated by the LED indicator.
- Product Size: Ultra-small size, only 18mm width, 35mm rail mounting.
- See more on Amazon...
Brand: GAEYAELE | Manufacturer: ZHEJIANG GEYA ELECTRICAL CO.,LTD
See On Amazon #15
JBtek 4 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM
Asin: B00KTEN3TM | Model: 4450182 | PartNumber: 4450182 | Ean: 0520361134553 | UPC: 520361134553
Be Able To Control Various Appliances, And Other Equipments With Large Current.
Indication Led's For Relay Output Status.
Application：Supports All Mcu Control, The Industrial Field, Plc Control, Smart Home Control.
5V 4-Channel Relay Interface Board, And Each One Needs 50-60Ma Driver Current.
Features
- Equiped with high-current relay, AC250V 10A ; DC30V 10A
- 5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current
- Be able to control various appliances, and other equipments with large current
- Application Supports all MCU control, The industrial field, PLC control, Smart home control
- Indication LED's for Relay output status
- See more on Amazon...
Brand: JBtek | Manufacturer: JBtek
Dimensions: 0.79 x 2.56 x 1.97 Inches | Weight: 0.02 Pounds
See On Amazon #16
ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32
Asin: B09ZQRLD95
With Power Indicator,8-Way Road Has A Status Indicator. With A Relay Coil To Absorb The Diode Protection..
The 8 Channels Are Optically Isolated, Safe, Reliable, Anti-Interference. Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control。For A Complete Data Sheet For This Relay Board, Please Download It From: Http://Dwz.Win/Uhw.
Standard Interface That Can Be Controlled Directly By Microcontroller (Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic).
Each Relay Has Normally Open And Normally Closed Contact. Can Be Selected By Jumper Relay And Ttl Or Ground..
Features
- 5V 8-Channel Relay interface board, each one needs 70mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
- Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #17
HiLetgo 12V 4 Channel Relay Module with OPTO-Isolated Support High and Low Level Trigger
Asin: B00LW2GM84 | Model: 3-01-0371 | PartNumber: 3-01-0371 | Ean: 0702082656167 | UPC: 702082656167
High And Low Level Trigger.
Using Smd Optocoupler Isolation.
Features
- HiLetgo 12V 4 Channel Relay Module
- Using SMD OPTOCOUPLER isolation
- High and Low Level Trigger
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #18
4 pcs DC 5V 1 Channel Relay Module Board Shield High/Low Level Trigger with Optocoupler
Asin: B079FJSYGY | Model: WJ-00010 | PartNumber: WJ-00010 | Ean: 6941595311734
Smd Optocoupler Isolation, Strong Driving Ability, Stable Performance; Trigger Current 5Ma.
The Module Can Be Set High Or Low Triggered By Jumper.
The Module Voltage 5V.
Maximum Load: Ac 250V/10A, Dc 30V/10A.
Features
- The module uses genuine quality relay, normally open interfaces
- Maximum load: AC 250V/10A, DC 30V/10A
- SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
- The module voltage 5V
- The module can be set high or low triggered by jumper
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
See On Amazon #19
SainSmart 16-Channel 12V Relay Module Board for Arduino DSP AVR PIC ARM
Asin: B0057OC66U | Model: 101-70-103 | PartNumber: 101-70-103 | Ean: 0796793392285, 6952131721337 | UPC: 796793392285
Standard Interface That Can Be Controlled Directly By Microcontroller (Arduino , 8051, Avr, Pic, Dsp, Arm, Arm, Msp433, Ttl Logic).
Indication Led's For Relay Output Status.
Equipped With High-Current Relay, Ac250v 10A ; Dc30v 12A.
Features
- 12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equipped with high-current relay, AC250V 10A ; DC30V 12A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic)
- Indication LED's for Relay output status
- See more on Amazon...
First Available: 05/06/2018
Brand: SainSmart | Manufacturer: SainStore Inc.
Dimensions: 1.19 x 8.00 x 5.70 Inches | Weight: 0.55 Pounds
See On Amazon
Looking For Something Else?
Search