BIGTREETECH TFT35 V3.0.1 Graphic Smart Display Controller Board for 3D Printer Ramps 1.4 RepRap 3D Printer Can Select Two Work Modes
Asin: B07VWF4W3J | Model: TFT35 V3.0.1 | PartNumber: TFT35 V3.0.1 | Ean: 0778601687783 | UPC: 778601687783
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3.Reserve Wifi Port, And Wifi Function Is Realized By External Wifi Module;.
5.2 Sets Of Uart Serial Port Extension Ports Are Reserved For Diy Use..
4.Reserve The Extension Port Of Filament Breaking Detection (Fil-Det);Reserve The Extension Port Of Automatic Shutdown After Printing (Ps-On);.
2.Serial Port Screen Mode Supports Two Printing Modes: Sd Card And U Disk..
Features
- 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode.
- 2.Serial port screen mode supports two printing modes: SD card and U disk.
- 3.Reserve WIFI port, and WIFI function is realized by external WIFI module;
- 4.Reserve the extension port of filament breaking detection (FIL-DET);Reserve the extension port of automatic shutdown after printing (PS-ON);
- 5.2 sets of UART serial port extension ports are reserved for DIY use.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon Similar To BIGTREETECH TFT35 V3.0.1 Graphic Smart
#1
BIGTREETECH SKR Mini E3 V3.0 Motherboard, Ender-3/Ender-3 Pro/Ender-3 V2 Motherboard Upgrade, BTT 32 Bit Silent Control Board with TMC2209 UART Stepper Motor Driver
Asin: B07YW86YS7 | Model: SKR MINI E3 V3.0 | PartNumber: SKR MINI E3 V3.0
🔥【Diy Friendly】Btt Skr Mini E3 V3.0 Motherboard Supports Bltouch, Rgb Lights, Blocking Detection And Shutdown Function. It Also Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28 V3.0 Touch Screen As Well As Original 12864 Lcd Screen..
🔥【Firmware Update】Skr Mini E3 V3.0 Is Compatible Both With Marlin And Klipper Firmwares. Firstly Download Firmware On Github Website Of Skr Mini E3 V3.0 Motherboard, Copy And Save It To Sd Card (Note: Ensure Firmware Have Been Reserved ), Then Re-Plug The Sd Card And Wait For 10S. Note: Our Control Board Comes Without Sd Card..
🔥【Warranty】Biqu Offers A 12-Months Warranty For Our Skr Mini E3 V3 Motherboard. Please Feel Free To Contact Us If You Might Have Any Problem About Our Product, We Are Always Ready For Help..
🔥【Onboard Tmc2209 Drivers】Bigtretech Skr Mini E3 V3.0 Mainboard Is Integrated With Ultra Silent Tmc2209 Stepper Motor Driver. Tmc2209 Driver Generates Lower Heat And Has A Larger-Area Cooling Position To Lower The Working Temperature. Meanwhile, Tmc2209 Adopts Stealthchop2 Mute Technology To Ensures Noiseless Operation, Maximum Efficiency And Best Motor Torque..
🔥【Larger Heatsink And 3 Cnc Fans】Upgraded Skr Mini E3 V3.0 Has A Larger Aluminum Heat Sink Area For Stepper Motor Driver, Increasing Its Heat Dissipation Performance By 20%. And Skr Mini E3 V3 Also Has 3 Heat Dissipation Controllable Fans To Reduce The Heat Of Your 3D Printers When It's Working..
Features
- Born for Ender-3 Main control chip of BTT SKR Mini E3 V3.0 mainboard is STMicroelectronics' latest G0 series: STM32G0B1RET6 or STM32G0B0RET6. This 3D printer control board is compatible with Ender-3, Ender-3 V2, Ender-3 Pro, Ender-5 and Ender-5 pro.
- Larger Heatsink and 3 CNC Fans Upgraded SKR MINI E3 V3.0 has a larger aluminum heat sink area for stepper motor driver, increasing its heat dissipation performance by 20%. And SKR MINI E3 V3 also has 3 heat dissipation controllable fans to reduce the heat of your 3D printers when it's working.
- DIY Friendly BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. It also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
- Onboard TMC2209 Drivers BIGTRETECH SKR MINI E3 V3.0 mainboard is integrated with ultra silent TMC2209 stepper motor driver. TMC2209 driver generates lower heat and has a larger-area cooling position to lower the working temperature. Meanwhile, TMC2209 adopts stealthChop2 Mute technology to ensures noiseless operation, maximum efficiency and best motor torque.
- Firmware Update SKR Mini E3 V3.0 is compatible both with Marlin and Klipper firmwares. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard, copy and save it to SD card (Note: ensure firmware have been reserved ), then re-plug the SD card and wait for 10s. Note: Our control board comes without SD card.
- Warranty BIQU offers a 12-months warranty for our SKR MINI E3 V3 motherboard. Please feel free to contact us if you might have any problem about our product, we are always ready for help.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #2
BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen Display 32-Bit Silent Board Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3/5 Ender 3 Pro/V2 3D Printer
Asin: B09MYT45BQ | Model: 1060000518 | PartNumber: 1060000518
⭐【Impressive Heat Dissipation】The Btt Skr Mini E3 V3.0 Silent Board Also Looks Aesthetic With Upgraded Designs.New Heatsink And 3 Pwm Controlled Fans Serve To Cool Down The Machine During Printing, Effectively Improving Performances On Heat Dissipation. A Direct 3D Printer Control Board Replacement For Ender 3, Ender 3 Pro, And Ender 5 3D Printer Motherboards..
⭐【Satisfying After-Sales Support】If You Have Any Problems About Btt Skr Mini E3 V3.0 & Tft35 E3 V3.0.1 Smart Display Combo Sets, Please Feel Free To Contact Us Anytime. We Have Profession Technical Supports Team To Help You As Soon As We Can..
⭐【Supports Touch/Graphic Display】Btt Tft35-E3 V3.0 Display Enables You To Easily Switch Between The Marlin Lcd Emulator And Touch Screen With Menu Interface, Simply By Pressing And Holding The Selector Wheel. It's A Plug And Play On Ender Series Printers With Btt Skr Mini E3 V3.0 Control Board.（Note:When Running Klipper Firmware,Tft35 E3 V3.0.1 Display Only Support 12864 Mode).
⭐【Upgraded More Capabilities】Intergrated With Tmc2209 V1.3 Mute Stepper Driver,Bigtreetech Skr Mini E3 V3.0 Motherboard Offers Silent Performance As Default, And Supports Dual Z Steppers For Linear Rail And Belt Upgrades, Filament Runout Support, Automatic Shutdown (Ups Support), Power-Off Resume, Sensorless Homing And So On..
Features
- BIGTREETECH Combo Set Comes with Bigtreetech SKR Mini E3 V3.0 32 bit control board and TFT35 E3 V3.0.1 touch screen display with dual modes as a set. perfect for Ender 3 3D Printer,plug and playing, Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances.
- Upgraded More Capabilities Intergrated with TMC2209 V1.3 mute stepper driver,BIGTREETECH SKR Mini E3 V3.0 motherboard offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on.
- Impressive Heat Dissipation The BTT SKR MINI E3 V3.0 silent board also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 3D Printer motherboards.
- Supports Touch/Graphic Display btt tft35-e3 v3.0 display enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It's a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board. Note:When running klipper firmware,tft35 e3 v3.0.1 display only support 12864 mode)
- Satisfying After-Sales Support If you have any problems about BTT SKR MINI E3 V3.0 & TFT35 E3 V3.0.1 smart display combo sets, please feel free to contact us anytime. We have profession technical supports team to help you as soon as we can.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #3
BIGTREETECH TFT35 V3.0.1 Touch Screen Display with Two Working Modes Smart Controller Panel Compatible with LCD12864 WiFi for Octopus V1.1/ SKR V1.4 Turbo/SKR 3/Manta M4P/M5P SKR 3 Ender 3 3D Printer
Asin: B07VWGFKLZ | Model: K-03101171 | PartNumber: K-03101171 | Ean: 0778365968586 | UPC: 778365968586
※【More Reserved Extensions】: Tft35 V3.0.1 Touch Screen Reserves The Extension Ports Of Filament Break Detection, Automatic Shutdown After Printing, Also Wifi Function Can Be Realized By External Wifi Module Through Wifi Port. Compatible With Skr Mini E3 V3.0/Skr V1.4 Turbo/Octopus/Skr 3/Skr 3 Ez/Manta M4p/5P/8P Control Board..
※【100% Technical Supports】: If You Have Any Problems About Btt Tft35 V3.0.1 Touchscreen, Please Feel Free To Contact Us On Amazon. Our Technical Supports Team Will Respon To You Within 24 Hours. 1-Year Warranty Is 100% Guaranteed!.
※【Easy Firmware Updates】: It Is Easy And Convenient To Update Firmware By Sd Card, Simply Downloading From Github, Coping And Saving It To Sd Card. Firmware Must Be Reserved, Then Re-Plug The Sd Card And Wait To 10S. That's All Takes To Finish Updating On Firmware..
※【Dual Working Modes】: Btt Tft35 V3.0.1 Display Enables Two Different Modes, With Options For Either Lcd12864 Encoder Mode, Or The Modern Colour Touch Screen Style. It Also Supports Both Sd Card And Usb Stick Printing..
Features
- 32 Bit Microprocessor : BIGTREETECH TFT35 V3.0.1 display adopted ARM Cortex-M3 series GD32F205VCT6 master controller chip with 32-bit CPU main frequency of 120 MHz, BTT TFT35 V3.0.1 touch screen can perfectly replace the LCD12864 screen for use.
- Dual Working Modes : BTT TFT35 V3.0.1 display enables two different modes, with options for either LCD12864 encoder mode, or the modern colour touch screen style. It also supports both SD card and USB stick printing.
- More Reserved Extensions : TFT35 V3.0.1 touch screen reserves the extension ports of filament break detection, automatic shutdown after printing, also WIFI function can be realized by external WIFI module through WIFI port. compatible with SKR MINI E3 V3.0/SKR V1.4 Turbo/Octopus/SKR 3/SKR 3 EZ/Manta M4P/5P/8P Control board.
- Easy Firmware Updates : It is easy and convenient to update firmware by SD card, simply downloading from Github, coping and saving it to SD card. firmware must be reserved, then re-plug the SD card and wait to 10s. That's all takes to finish updating on firmware.
- 100% Technical Supports : If you have any problems about BTT TFT35 V3.0.1 touchscreen, please feel free to contact us on Amazon. Our technical supports team will respon to you within 24 hours. 1-Year Warranty is 100% guaranteed!
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Direct
See On Amazon #4
BIGTREETECH Manta E3EZ + CB1 V2.2 + 5Pcs EZ2209 Kit Support Running Klipper Firmware Silent Control Board Kit for Ender-3 V2, Ender-3 Pro, Ender-3, BIQU B1 3D Printers
Asin: B0C6LLFBN5 | Model: KINGPRINT-1029549 | PartNumber: KINGPRINT-1029549
The Bigtreetech Manta E3 Ez Main Control Board And Core Board Use Btb Connection, Which Can Be Perfectly Paired With The Bigtreetech Cb1 Core Board..
Bigtreetech Ez2209 Using A New Customized Heat Sink, While Enhancing The Heat Dissipation Capacity, It Protects The Driver Chip From External Damage; The Newly Developed Board Frame Is Used To Match The New Connector To Improve The User Experience..
Bigtreetech Cb1 Is Equipped With Quad Core 64 Bit Arm Cortex-A53 @ 1.5Ghz Processor, 1Gb Ddr3 Memory Chip; Onboard 100M Ethernet Interface And Supports Wifi Transmission..
Manta E3ez Adopts Arm Cortex-M0+Series Stm32g0b1re Master Chip With 32-Bit Main Frequency Of 64Mhz; The Maximum Power Supply Of The Motor Is 56V;.
Features
- This kit includes BIGTREETECH Manta E3EZ silent control board, CB1 V2.2 core control board, and 5PCS EZ2209 stepper motor drivers.
- Manta E3EZ adopts ARM Cortex-M0+series STM32G0B1RE master chip with 32-bit main frequency of 64MHz; The maximum power supply of the motor is 56V;
- The BIGTREETECH Manta E3 EZ main control board and core board use BTB connection, which can be perfectly paired with the BIGTREETECH CB1 core board.
- BIGTREETECH CB1 is equipped with quad core 64 bit ARM Cortex-A53 @ 1.5GHz processor, 1GB DDR3 memory chip; Onboard 100M Ethernet interface and supports WIFI transmission.
- BIGTREETECH EZ2209 using a new customized heat sink, while enhancing the heat dissipation capacity, it protects the driver chip from external damage; The newly developed board frame is used to match the new connector to improve the user experience.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #5
BIGTREETECH SFS V2.0 Smart Filament Runout Sensor Upgrade Bi-Directional Photoelectric Filament Break Sensor for 1.75mm Filament for SKR Mini E3 V3.0 Manta M8P Octopus Pro BTT Pi Control Board
Asin: B0C77QS4TS | Model: BIGTREETECH SFS V2.0 | PartNumber: BIGTREETECH SFS V2.0
【Wide Compatibility, Easy Installation】Supports Bowden And Direct-Drive Extruders, With 3 Mounting Holes For Easy Mounting To Printer Using Bracket. Support Motherboards With Available Endstop Ports Or Dedicated Filament Runout Ports, Such As Bigtreetech Skr Mini E3 V3.0, Manta E3ez, Manta M8p, Octopus Pro, Etc. Please Consult Our Technical Support Before Using The Motherboard Without Filament Runout Port..
【Instructions For Use】Insert Filament From The Direct Quick Connector In Any Direction Of Smart Filament Sensor; The Red Light Will Illuminate When There Is No Filament In The Module. The Blue Light Will Flash When The Extrusion Is Normal. The Blue Light Will Stay On Or Off When There Is No Extrusion..
【Photoelectric Sensor Technology】Sfs V2.0 Adopts Photoelectric Sensor Technology, With Theoretical Detection Length Of 2.88Mm, Which Is More Accurate Than The 7Mm Of Sfs V1.0. Please Note: 2.88 Mm Is The Minimum Detection Length Required For The Sensor To Function Properly. If You Encounter Problem Of False Triggers, Try Increasing The Detection Length By 1Mm Increments Until The Problem Is Resolved..
【Multifunctional Detection】Sfs V2.0 Detects Extrusion Errors Caused By Filament Runout, Nozzle Clogging, Filament Tying, And Extruder Trouble. It Has Two Signal Outputs And Indicator Lights To Distinguish Between Clogging Or Filament Runout. Small And Lightweight, It Will Not Add Too Much Pressure To The Printer's Extrusion Head..
Features
- Bi-directional Feeding BIGTREETECH SFS V2.0 is bi-directional, there is no restriction on filament direction, giving you guys more flexibility during installation. It suitable for Marlin, Klipper, and RRF firmware.
- Multifunctional Detection SFS V2.0 detects extrusion errors caused by filament runout, nozzle clogging, filament tying, and extruder trouble. It has two signal outputs and indicator lights to distinguish between clogging or filament runout. Small and lightweight, it will not add too much pressure to the printer's extrusion head.
- Wide Compatibility, Easy Installation Supports Bowden and Direct-Drive extruders, with 3 mounting holes for easy mounting to printer using bracket. Support motherboards with available endstop ports or dedicated filament runout ports, such as BIGTREETECH SKR Mini E3 V3.0, Manta E3EZ, Manta M8P, Octopus Pro, etc. Please consult our technical support before using the motherboard without filament runout port.
- Photoelectric Sensor Technology SFS V2.0 adopts photoelectric sensor technology, with theoretical detection length of 2.88mm, which is more accurate than the 7mm of SFS V1.0. Please Note: 2.88 mm is the minimum detection length required for the sensor to function properly. If you encounter problem of false triggers, try increasing the detection length by 1mm increments until the problem is resolved.
- Instructions for use Insert filament from the direct quick connector in any direction of smart filament sensor; The red light will illuminate when there is no filament in the module. The blue light will flash when the extrusion is normal. The blue light will stay on or off when there is no extrusion.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Warranty: 1年保修
See On Amazon #6
BIGTREETECH Pi V1.2 Control board 64bit Quad Core 1GB DDR3L 40-pin GPIO Compatible with SKR MINI E3 V3.0 Octopus/SKR V1.4 turbo to run Klipper/Linux/Debain For I3/CoreXY 3D Printer
Asin: B0C46B6X64 | Model: PI V1.2 | PartNumber: PI V1.2
【Support Display And Motherboard】Btt Pi V1.2 Core Board Display Adopts Malig32 Mp2 Gpu, Support Opengl3.2 And Hdmi2.0A Uhd 4K Video & Audio Output And Spi Screen（Btt Hdmi5/7, Tft35 Spi), Onboard 4Xusb2.0 Port. Powerful High Performance Details And Clarity. Motherboard Support Skr Mini E3 V3.0, Skr Pico, Skr V1.4 Turbo, Skr 3, Kraken, Octopus Pro/Octopus V1.1 Series. Then Running Klipper Firmware..
【Flexible Power】Support Usb-C 5V Power Supply And Dc12v-24V From A 3D Printer, Making It Easy And Efficient To Power Up The Board Without Any Extra Adapters Or Power Soucres..
【Rich Connectivity】Onboard Standard 40-Pingpio Header, 3.5Mm Audio Jack, Tf Card Slot, Adxl345 Spi, Usb To Can Module(Requires Can Adapter V1.0 Module). Built-In Ir Receiver. Rj45 Port Support A 100Mbps Wired Network, Built-In 2.4G Wifi Module, Supports 100Mbps Wireless Network, Users Can Connect The Inlculde Wifi Antenna To Get A Stronger And More Stable Wifi Signa..
【About Size】Btt Pi V1.2 Control Board Size Is 85*56Mm, The Same As The Raspberry-Pi 3B/4B, Making It A Seamless Fit For Your Existing Projects..
Features
- Main Control Chip BIGTREETECH BTT Pi v1.2 board adopts ALLWINNER H616, 64-bit Quad-core, Cortex-A53@1.5GHz Processor, RAM is 1GB DDR3L SDRAM.
- About Size BTT Pi v1.2 control board size is 85*56mm, the same as the Raspberry-Pi 3B/4B, Making it a seamless fit for your existing projects.
- Support Display and Motherboard BTT Pi v1.2 core board display adopts MaliG32 MP2 GPU, support OpenGL3.2 and HDMI2.0A UHD 4K Video & Audio output and SPI screen BTT HDMI5/7, TFT35 SPI), onboard 4xUSB2.0 port. Powerful high performance details and clarity. Motherboard support skr mini e3 v3.0, skr pico, skr v1.4 turbo, skr 3, Kraken, Octopus pro/Octopus V1.1 series. then running Klipper firmware.
- Rich Connectivity Onboard standard 40-pinGPIO header, 3.5mm audio jack, TF card slot, adxl345 spi, USB to CAN module(requires CAN adapter V1.0 module). Built-in IR receiver. RJ45 port support a 100Mbps wired network, built-in 2.4G Wifi module, supports 100Mbps wireless network, users can connect the inlculde wifi antenna to get a stronger and more stable Wifi signa.
- Flexible Power Support USB-C 5V power supply and DC12V-24V from a 3D Printer, making it easy and efficient to power up the board without any extra adapters or power soucres.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 3.30 x 2.20 inches
See On Amazon #7
BIGTREETECH HDMI5 V1.1 Touchscreen Monitor 5 inch IPS LCD Display 800 480 for Raspberry-Pi 4B/3B, BTT PI V1.2/PI 2 Compatible with SKR Mini E3 V3.0/Octopus/Manta M4P/M5P SKR 3 to Running Klipper
Asin: B0CMZYBPDF | Model: USA6-1040000039 | PartNumber: USA6-1040000039
Btt 5 Inch Hdmi Display Built-In Audio Decoding Circuit, Support 3.5Mm Headphone Jack Audio Output And Brightness And Display Direction Adjustment..
【 After-Sales Service】The Manual And Installation Instructions Have Been Uploaded To Github, If You Have Any Problems During Use, Please Contact Us At The First Time, We Will Give You A Satisfactory Solution..
Widely Compatible B: Bigtreetech Hdmi5 V1.1 Display Working With Cb1/Cb2, Compatible With Manta M4p/M5p/M8p, Matan Ez E3 Board, It Can Running Klipper Touch Screen Mode..
4Pin Xh2.54 Breakout Port. The 4-Pins Xh2.54 Breakout Port Allows Custom Connection Via Usb Protocol, As Well As Screen Independent Power (Dc 5V), Giving Users More Diy Options..
Widely Compatible A: Btt Hdmi5 V1.1 Ips Lcd Display Compatible With Btt Pi V1.2/Pi 2 Or Cb1/Cb2+Pi4b, Can Working With Skr Mini E3 V3.0/Skr Pico/Skr V1.4 Turbo/Skr 3/Octopus Series/Kraken/Skr Pro V1.2 3D Printer Board, Running Klipper Touch Screen Mode. For Voron, Corexy, Vzbot, I3 3D Printers..
Bigtreetech 5 Inch Hdmi Touch Screen Adopts 5 Inch Ips Capacitive Touch Screen With A Resolution Of 800X480, 160Viewing Angle, Support Up To 5-Point Touch..
Features
- BIGTREETECH HDMI5 touchscreen desinged for users of 3d printers using the Klipper system. HDMI input, suitablec for Raspberry Pi4, PI4B+CB1/CB2, BTT PI V1.2/BTT PI 2, Banana Pi, Windows 10 8 7, and other mini PC.
- BIGTREETECH 5 inch hdmi touch screen adopts 5 inch IPS capacitive touch screen with a resolution of 800x480, 160viewing angle, support up to 5-point touch.
- BTT 5 inch hdmi display built-in audio decoding circuit, support 3.5mm headphone jack audio output and brightness and display direction adjustment.
- Widely Compatible A: BTT HDMI5 V1.1 IPS LCD display compatible with BTT PI V1.2/PI 2 or CB1/CB2+PI4B, can working with SKR Mini E3 V3.0/SKR Pico/SKR V1.4 Turbo/SKR 3/Octopus series/Kraken/SKR Pro V1.2 3D printer board, running Klipper touch screen mode. for Voron, CoreXY, VZbot, I3 3D Printers.
- Widely Compatible B: BIGTREETECH HDMI5 V1.1 display working with CB1/CB2, compatible with Manta M4P/M5P/M8P, Matan EZ E3 board, it can running Klipper touch screen mode.
- 4pin XH2.54 breakout port. The 4-pins XH2.54 breakout port allows custom connection via USB protocol, as well as screen independent power (DC 5V), giving users more DIY options.
- After-sales Service The manual and installation instructions have been uploaded to Github, If you have any problems during use, please contact us at the first time, we will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 4.76 x 2.99 inches
See On Amazon #8
BIGTREETECH Mini12864 V2.0 LCD Graphic Smart Display Control Board with Adapter and Cable for Ender-3 VORON 2.4 Prusa-i3 3D Printer RAMPS 1.4 RepRap 3D Printer Mendel Prusa Arduino
Asin: B08P5LXR86 | Model: KINGPRINT-ZZB000475 | PartNumber: KINGPRINT-ZZB000475 | Ean: 0791568743491 | UPC: 791568743491
3.Product Comes Encoder Parameter Adjustment Can Be Achieved, And The File Selection Print..
5.Do Not Worry About The Problem Of After-Sales, If There Is Any Need, Get In Touch With Us, We Will Help You Solve It..
4.Plug And Play On The Ramps, But Need To Modify The Firmware To Support..
2.With A Sd Card Base On Back, Put Slicing File Into The Sd Card And Select The File On The Lcd, Then Can Be Printing..
Features
- 1.The Mini12864 display panel has RGB multi-color backlight and can support 8 RGB, which is even more cool.
- 2.With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.
- 3.Product comes encoder parameter adjustment can be achieved, and the file selection print.
- 4.Plug and play on the RAMPS, but need to modify the firmware to support.
- 5.Do not worry about the problem of after-sales, if there is any need, get in touch with us, we will help you solve it.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.18 x 2.36 x 1.18 Inches | Weight: 0.11 Pounds
See On Amazon #9
HiLetgo 3D Printer Reprap Smart Controller 12864 LCD Display with Smart Controller Board for 3D Printer RAMPS 1.4 Reprap Mendel Prusa for Arduino 128x64 LCD Blue Color
Asin: B07X378P8X | Model: 3-01-0889 | PartNumber: 3-01-0889
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #10
BIGTREETECH DIRECT SKR Mini E3 V2.0 Control Board 32Bit Silent Motherboard Integrated with TMC2209 UART Stepper Motor Driver for Upgraded Ender 3 Ender 3 Pro 3D Printer Control Board
Asin: B089CQ3DHB | Model: ZZB000412 | PartNumber: ZZB000412
🌈【Support Various Functions】Btt Skr Mini E3 V2.0 Control Board Supports Various Function Extensions, Such As, Bltouch, Filament Detection, Resumption Of Shutdown, Shutdown After Shutdown, Etc ..
🌈【Satisfying Customer Services】If You Need Any Information For Skr Mini E3 V2.0, You Could Contact Us On Amazon, And We'll Get Back To You Within 24 Hours..
🌈【Notes】 Pay Attention To Correct Wiring, Avoid Motherboard Contact With Metal Objects, And Take Electrostatic Protection Measures..
🌈【 4 Layers For Board】Bigtreetech Direct Skr Mini E3 V2.0 Increased To 4 Layers On The Control Board's Back, So As To Improve On Heat Dissipation Signal Function And Anti-Interference..
🌈【Better Thermal Dissipation】The Hot-Bed Mos Tube Uses Wsk220n04, Low On-Resistance, Which Reduces Heat Generation. Enlarged Heat Dissipation Area Protects Driving Chip And Components From Problems Caused By Heat Sink..
Features
- Silent Control Board BIGTREETECH DIRECT SKR MINI E3 V2.0 adopts ARM Cortex-M3 series STM32F103RCT6 main control chip with 32-bit CPU 72MHz, integrated with TMC2209 to enhance its stability. It's a super easy drop in replacement for Ender 3 printer.plug and playing.
- Better Thermal Dissipation The hot-bed MOS tube uses WSK220N04, low on-resistance, which reduces heat generation. Enlarged heat dissipation area protects driving chip and components from problems caused by heat sink.
- Support Various Functions BTT SKR MINI E3 V2.0 control board supports various function extensions, such as, BLtouch, filament detection, resumption of shutdown, shutdown after shutdown, etc .
- 4 Layers for Board BIGTREETECH DIRECT SKR MINI E3 V2.0 increased to 4 layers on the control board's back, so as to improve on heat dissipation signal function and anti-interference.
- Satisfying Customer Services If you need any information for SKR MINI E3 V2.0, you could contact us on Amazon, and we'll get back to you within 24 hours.
- Notes Pay attention to correct wiring, avoid motherboard contact with metal objects, and take electrostatic protection measures.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Origianl
Dimensions: 0.39 x 4.00 x 2.80 Inches
See On Amazon
Looking For Something Else?
Search