BIGTREETECH TFT35 V3.0.1 Touch Screen Display RepRap Smart Controller Panel 2 Working Modes Compatible with SKR V1.4/SKR 2 3D Printer Parts
Asin: B07W1PB11F | Model: EE0310117120190731 | PartNumber: EE0310117120190731 | Ean: 0791300548353 | UPC: 791300548353
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.❤【12864Lcd Mode】The 12864Lcd Mode Includes Exp1, Exp2, Exp3, Where Exp1 And Exp2 Are General Motherboards Lcd Screen Interface, While Exp3 Is The Lcd Screen Interface Used By E3 Series Boards (Like Skr Mini E3,Skr E3 Dip, Etc.).
❤【Firmware Update】 It Is Easy And Convenient To Update Firmware By Sd Card,Download From Our Github, Copy And Save It To Sd Card.Firmware Must Bed Reserved ,Then Re-Plug The Sd Card And Wait To 10S.The Firmware Has Been Successfully Updated..
❤【More Extension Ports Is Reserved】 Tft35 V3.0.1 Display Reserve The Extension Port Of Filament Break Detection ,Automatic Shutdown After Printing,Also Wifi Function Can Be Realized By External Wifi Module Through Wifi Port..
❤【Two Working Modes】Tft35 V3.0.1 Touch Screen Support Uart Serial Port Screen Mode(Touch Screen Mode) And 12864 Screen Mode,Serial Screen Mode Supports Both Sd Card And Usb Stick Printing..
Features
- 32 Bit High Performance Microprocessor TFT35 V3.0.1 touch screen uses 32 bit ARM level Cortex-M3 series GD32F205VCT6,120MHz frequency Microprocessor, which makes it an upgraded replacement of LCD12864
- Two Working Modes TFT35 V3.0.1 Touch screen support UART serial port screen mode(touch screen mode) and 12864 screen mode,serial screen mode supports both SD card and USB stick printing.
- 12864LCD Mode The 12864LCD mode includes EXP1, EXP2, EXP3, where EXP1 and EXP2 are general motherboards LCD screen interface, while EXP3 is the LCD screen interface used by E3 series boards (like SKR MINI E3,SKR E3 DIP, etc.)
- More Extension Ports is Reserved TFT35 V3.0.1 display reserve the extension port of filament break detection ,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port.
- Firmware Update It is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon Similar To BIGTREETECH TFT35 V3.0.1 Touch Screen
#1
BIGTREETECH SKR Mini E3 V3.0 Motherboard, Ender-3/Ender-3 Pro/Ender-3 V2 Motherboard Upgrade, BTT 32 Bit Silent Control Board with TMC2209 UART Stepper Motor Driver
Asin: B07YW86YS7 | Model: SKR MINI E3 V3.0 | PartNumber: SKR MINI E3 V3.0
🔥【Diy Friendly】Btt Skr Mini E3 V3.0 Motherboard Supports Bltouch, Rgb Lights, Blocking Detection And Shutdown Function. It Also Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28 V3.0 Touch Screen As Well As Original 12864 Lcd Screen..
🔥【Firmware Update】Skr Mini E3 V3.0 Is Compatible Both With Marlin And Klipper Firmwares. Firstly Download Firmware On Github Website Of Skr Mini E3 V3.0 Motherboard, Copy And Save It To Sd Card (Note: Ensure Firmware Have Been Reserved ), Then Re-Plug The Sd Card And Wait For 10S. Note: Our Control Board Comes Without Sd Card..
🔥【Warranty】Biqu Offers A 12-Months Warranty For Our Skr Mini E3 V3 Motherboard. Please Feel Free To Contact Us If You Might Have Any Problem About Our Product, We Are Always Ready For Help..
🔥【Onboard Tmc2209 Drivers】Bigtretech Skr Mini E3 V3.0 Mainboard Is Integrated With Ultra Silent Tmc2209 Stepper Motor Driver. Tmc2209 Driver Generates Lower Heat And Has A Larger-Area Cooling Position To Lower The Working Temperature. Meanwhile, Tmc2209 Adopts Stealthchop2 Mute Technology To Ensures Noiseless Operation, Maximum Efficiency And Best Motor Torque..
🔥【Larger Heatsink And 3 Cnc Fans】Upgraded Skr Mini E3 V3.0 Has A Larger Aluminum Heat Sink Area For Stepper Motor Driver, Increasing Its Heat Dissipation Performance By 20%. And Skr Mini E3 V3 Also Has 3 Heat Dissipation Controllable Fans To Reduce The Heat Of Your 3D Printers When It's Working..
Features
- Born for Ender-3 Main control chip of BTT SKR Mini E3 V3.0 mainboard is STMicroelectronics' latest G0 series: STM32G0B1RET6 or STM32G0B0RET6. This 3D printer control board is compatible with Ender-3, Ender-3 V2, Ender-3 Pro, Ender-5 and Ender-5 pro.
- Larger Heatsink and 3 CNC Fans Upgraded SKR MINI E3 V3.0 has a larger aluminum heat sink area for stepper motor driver, increasing its heat dissipation performance by 20%. And SKR MINI E3 V3 also has 3 heat dissipation controllable fans to reduce the heat of your 3D printers when it's working.
- DIY Friendly BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. It also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
- Onboard TMC2209 Drivers BIGTRETECH SKR MINI E3 V3.0 mainboard is integrated with ultra silent TMC2209 stepper motor driver. TMC2209 driver generates lower heat and has a larger-area cooling position to lower the working temperature. Meanwhile, TMC2209 adopts stealthChop2 Mute technology to ensures noiseless operation, maximum efficiency and best motor torque.
- Firmware Update SKR Mini E3 V3.0 is compatible both with Marlin and Klipper firmwares. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard, copy and save it to SD card (Note: ensure firmware have been reserved ), then re-plug the SD card and wait for 10s. Note: Our control board comes without SD card.
- Warranty BIQU offers a 12-months warranty for our SKR MINI E3 V3 motherboard. Please feel free to contact us if you might have any problem about our product, we are always ready for help.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #2
BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen Display 32-Bit Silent Board Integrated with TMC2209 UART Stepper Driver Compatible with Ender 3/5 Ender 3 Pro/V2 3D Printer
Asin: B09MYT45BQ | Model: 1060000518 | PartNumber: 1060000518
⭐【Impressive Heat Dissipation】The Btt Skr Mini E3 V3.0 Silent Board Also Looks Aesthetic With Upgraded Designs.New Heatsink And 3 Pwm Controlled Fans Serve To Cool Down The Machine During Printing, Effectively Improving Performances On Heat Dissipation. A Direct 3D Printer Control Board Replacement For Ender 3, Ender 3 Pro, And Ender 5 3D Printer Motherboards..
⭐【Satisfying After-Sales Support】If You Have Any Problems About Btt Skr Mini E3 V3.0 & Tft35 E3 V3.0.1 Smart Display Combo Sets, Please Feel Free To Contact Us Anytime. We Have Profession Technical Supports Team To Help You As Soon As We Can..
⭐【Supports Touch/Graphic Display】Btt Tft35-E3 V3.0 Display Enables You To Easily Switch Between The Marlin Lcd Emulator And Touch Screen With Menu Interface, Simply By Pressing And Holding The Selector Wheel. It's A Plug And Play On Ender Series Printers With Btt Skr Mini E3 V3.0 Control Board.（Note:When Running Klipper Firmware,Tft35 E3 V3.0.1 Display Only Support 12864 Mode).
⭐【Upgraded More Capabilities】Intergrated With Tmc2209 V1.3 Mute Stepper Driver,Bigtreetech Skr Mini E3 V3.0 Motherboard Offers Silent Performance As Default, And Supports Dual Z Steppers For Linear Rail And Belt Upgrades, Filament Runout Support, Automatic Shutdown (Ups Support), Power-Off Resume, Sensorless Homing And So On..
Features
- BIGTREETECH Combo Set Comes with Bigtreetech SKR Mini E3 V3.0 32 bit control board and TFT35 E3 V3.0.1 touch screen display with dual modes as a set. perfect for Ender 3 3D Printer,plug and playing, Adopted the latest G0 series MCU-STM32G0B0RET6 main control chip packing excellent performances.
- Upgraded More Capabilities Intergrated with TMC2209 V1.3 mute stepper driver,BIGTREETECH SKR Mini E3 V3.0 motherboard offers silent performance as default, and supports dual Z steppers for linear rail and belt upgrades, filament runout support, automatic shutdown (UPS support), power-off resume, sensorless homing and so on.
- Impressive Heat Dissipation The BTT SKR MINI E3 V3.0 silent board also looks aesthetic with upgraded designs.New heatsink and 3 PWM controlled fans serve to cool down the machine during printing, effectively improving performances on heat dissipation. A direct 3D printer control board replacement for Ender 3, Ender 3 Pro, and Ender 5 3D Printer motherboards.
- Supports Touch/Graphic Display btt tft35-e3 v3.0 display enables you to easily switch between the Marlin LCD emulator and touch screen with menu interface, simply by pressing and holding the selector wheel. It's a plug and play on Ender series printers with BTT SKR MINI E3 V3.0 control board. Note:When running klipper firmware,tft35 e3 v3.0.1 display only support 12864 mode)
- Satisfying After-Sales Support If you have any problems about BTT SKR MINI E3 V3.0 & TFT35 E3 V3.0.1 smart display combo sets, please feel free to contact us anytime. We have profession technical supports team to help you as soon as we can.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #3
BIGTREETECH Pi V1.2 Control board 64bit Quad Core 1GB DDR3L 40-pin GPIO Compatible with SKR MINI E3 V3.0 Octopus/SKR V1.4 turbo to run Klipper/Linux/Debain For I3/CoreXY 3D Printer
Asin: B0C46B6X64 | Model: PI V1.2 | PartNumber: PI V1.2
【Support Display And Motherboard】Btt Pi V1.2 Core Board Display Adopts Malig32 Mp2 Gpu, Support Opengl3.2 And Hdmi2.0A Uhd 4K Video & Audio Output And Spi Screen（Btt Hdmi5/7, Tft35 Spi), Onboard 4Xusb2.0 Port. Powerful High Performance Details And Clarity. Motherboard Support Skr Mini E3 V3.0, Skr Pico, Skr V1.4 Turbo, Skr 3, Kraken, Octopus Pro/Octopus V1.1 Series. Then Running Klipper Firmware..
【Flexible Power】Support Usb-C 5V Power Supply And Dc12v-24V From A 3D Printer, Making It Easy And Efficient To Power Up The Board Without Any Extra Adapters Or Power Soucres..
【Rich Connectivity】Onboard Standard 40-Pingpio Header, 3.5Mm Audio Jack, Tf Card Slot, Adxl345 Spi, Usb To Can Module(Requires Can Adapter V1.0 Module). Built-In Ir Receiver. Rj45 Port Support A 100Mbps Wired Network, Built-In 2.4G Wifi Module, Supports 100Mbps Wireless Network, Users Can Connect The Inlculde Wifi Antenna To Get A Stronger And More Stable Wifi Signa..
【About Size】Btt Pi V1.2 Control Board Size Is 85*56Mm, The Same As The Raspberry-Pi 3B/4B, Making It A Seamless Fit For Your Existing Projects..
Features
- Main Control Chip BIGTREETECH BTT Pi v1.2 board adopts ALLWINNER H616, 64-bit Quad-core, Cortex-A53@1.5GHz Processor, RAM is 1GB DDR3L SDRAM.
- About Size BTT Pi v1.2 control board size is 85*56mm, the same as the Raspberry-Pi 3B/4B, Making it a seamless fit for your existing projects.
- Support Display and Motherboard BTT Pi v1.2 core board display adopts MaliG32 MP2 GPU, support OpenGL3.2 and HDMI2.0A UHD 4K Video & Audio output and SPI screen BTT HDMI5/7, TFT35 SPI), onboard 4xUSB2.0 port. Powerful high performance details and clarity. Motherboard support skr mini e3 v3.0, skr pico, skr v1.4 turbo, skr 3, Kraken, Octopus pro/Octopus V1.1 series. then running Klipper firmware.
- Rich Connectivity Onboard standard 40-pinGPIO header, 3.5mm audio jack, TF card slot, adxl345 spi, USB to CAN module(requires CAN adapter V1.0 module). Built-in IR receiver. RJ45 port support a 100Mbps wired network, built-in 2.4G Wifi module, supports 100Mbps wireless network, users can connect the inlculde wifi antenna to get a stronger and more stable Wifi signa.
- Flexible Power Support USB-C 5V power supply and DC12V-24V from a 3D Printer, making it easy and efficient to power up the board without any extra adapters or power soucres.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 3.30 x 2.20 inches
See On Amazon #4
BIGTREETECH TFT35 V3.0.1 Touch Screen Display with Two Working Modes Smart Controller Panel Compatible with LCD12864 WiFi for Octopus V1.1/ SKR V1.4 Turbo/SKR 3/Manta M4P/M5P SKR 3 Ender 3 3D Printer
Asin: B07VWGFKLZ | Model: K-03101171 | PartNumber: K-03101171 | Ean: 0778365968586 | UPC: 778365968586
※【More Reserved Extensions】: Tft35 V3.0.1 Touch Screen Reserves The Extension Ports Of Filament Break Detection, Automatic Shutdown After Printing, Also Wifi Function Can Be Realized By External Wifi Module Through Wifi Port. Compatible With Skr Mini E3 V3.0/Skr V1.4 Turbo/Octopus/Skr 3/Skr 3 Ez/Manta M4p/5P/8P Control Board..
※【100% Technical Supports】: If You Have Any Problems About Btt Tft35 V3.0.1 Touchscreen, Please Feel Free To Contact Us On Amazon. Our Technical Supports Team Will Respon To You Within 24 Hours. 1-Year Warranty Is 100% Guaranteed!.
※【Easy Firmware Updates】: It Is Easy And Convenient To Update Firmware By Sd Card, Simply Downloading From Github, Coping And Saving It To Sd Card. Firmware Must Be Reserved, Then Re-Plug The Sd Card And Wait To 10S. That's All Takes To Finish Updating On Firmware..
※【Dual Working Modes】: Btt Tft35 V3.0.1 Display Enables Two Different Modes, With Options For Either Lcd12864 Encoder Mode, Or The Modern Colour Touch Screen Style. It Also Supports Both Sd Card And Usb Stick Printing..
Features
- 32 Bit Microprocessor : BIGTREETECH TFT35 V3.0.1 display adopted ARM Cortex-M3 series GD32F205VCT6 master controller chip with 32-bit CPU main frequency of 120 MHz, BTT TFT35 V3.0.1 touch screen can perfectly replace the LCD12864 screen for use.
- Dual Working Modes : BTT TFT35 V3.0.1 display enables two different modes, with options for either LCD12864 encoder mode, or the modern colour touch screen style. It also supports both SD card and USB stick printing.
- More Reserved Extensions : TFT35 V3.0.1 touch screen reserves the extension ports of filament break detection, automatic shutdown after printing, also WIFI function can be realized by external WIFI module through WIFI port. compatible with SKR MINI E3 V3.0/SKR V1.4 Turbo/Octopus/SKR 3/SKR 3 EZ/Manta M4P/5P/8P Control board.
- Easy Firmware Updates : It is easy and convenient to update firmware by SD card, simply downloading from Github, coping and saving it to SD card. firmware must be reserved, then re-plug the SD card and wait to 10s. That's all takes to finish updating on firmware.
- 100% Technical Supports : If you have any problems about BTT TFT35 V3.0.1 touchscreen, please feel free to contact us on Amazon. Our technical supports team will respon to you within 24 hours. 1-Year Warranty is 100% guaranteed!
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Direct
See On Amazon #5
BIGTREETECH Manta E3EZ + CB1 V2.2 + 5Pcs EZ2209 Kit Support Running Klipper Firmware Silent Control Board Kit for Ender-3 V2, Ender-3 Pro, Ender-3, BIQU B1 3D Printers
Asin: B0C6LLFBN5 | Model: KINGPRINT-1029549 | PartNumber: KINGPRINT-1029549
The Bigtreetech Manta E3 Ez Main Control Board And Core Board Use Btb Connection, Which Can Be Perfectly Paired With The Bigtreetech Cb1 Core Board..
Bigtreetech Ez2209 Using A New Customized Heat Sink, While Enhancing The Heat Dissipation Capacity, It Protects The Driver Chip From External Damage; The Newly Developed Board Frame Is Used To Match The New Connector To Improve The User Experience..
Bigtreetech Cb1 Is Equipped With Quad Core 64 Bit Arm Cortex-A53 @ 1.5Ghz Processor, 1Gb Ddr3 Memory Chip; Onboard 100M Ethernet Interface And Supports Wifi Transmission..
Manta E3ez Adopts Arm Cortex-M0+Series Stm32g0b1re Master Chip With 32-Bit Main Frequency Of 64Mhz; The Maximum Power Supply Of The Motor Is 56V;.
Features
- This kit includes BIGTREETECH Manta E3EZ silent control board, CB1 V2.2 core control board, and 5PCS EZ2209 stepper motor drivers.
- Manta E3EZ adopts ARM Cortex-M0+series STM32G0B1RE master chip with 32-bit main frequency of 64MHz; The maximum power supply of the motor is 56V;
- The BIGTREETECH Manta E3 EZ main control board and core board use BTB connection, which can be perfectly paired with the BIGTREETECH CB1 core board.
- BIGTREETECH CB1 is equipped with quad core 64 bit ARM Cortex-A53 @ 1.5GHz processor, 1GB DDR3 memory chip; Onboard 100M Ethernet interface and supports WIFI transmission.
- BIGTREETECH EZ2209 using a new customized heat sink, while enhancing the heat dissipation capacity, it protects the driver chip from external damage; The newly developed board frame is used to match the new connector to improve the user experience.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #6
BIGTREETECH Mini12864 V2.0 LCD Graphic Smart Display Control Board with Adapter and Cable for Ender-3 VORON 2.4 Prusa-i3 3D Printer RAMPS 1.4 RepRap 3D Printer Mendel Prusa Arduino
Asin: B08P5LXR86 | Model: KINGPRINT-ZZB000475 | PartNumber: KINGPRINT-ZZB000475 | Ean: 0791568743491 | UPC: 791568743491
3.Product Comes Encoder Parameter Adjustment Can Be Achieved, And The File Selection Print..
5.Do Not Worry About The Problem Of After-Sales, If There Is Any Need, Get In Touch With Us, We Will Help You Solve It..
4.Plug And Play On The Ramps, But Need To Modify The Firmware To Support..
2.With A Sd Card Base On Back, Put Slicing File Into The Sd Card And Select The File On The Lcd, Then Can Be Printing..
Features
- 1.The Mini12864 display panel has RGB multi-color backlight and can support 8 RGB, which is even more cool.
- 2.With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.
- 3.Product comes encoder parameter adjustment can be achieved, and the file selection print.
- 4.Plug and play on the RAMPS, but need to modify the firmware to support.
- 5.Do not worry about the problem of after-sales, if there is any need, get in touch with us, we will help you solve it.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.18 x 2.36 x 1.18 inches | Weight: 0.11 pounds
See On Amazon #7
BIGTREETECH HDMI5 V1.1 Touchscreen Monitor 5 inch IPS LCD Display 800 480 for Raspberry-Pi 4B/3B, BTT PI V1.2/PI 2 Compatible with SKR Mini E3 V3.0/Octopus/Manta M4P/M5P SKR 3 to Running Klipper
Asin: B0CMZYBPDF | Model: USA6-1040000039 | PartNumber: USA6-1040000039
Btt 5 Inch Hdmi Display Built-In Audio Decoding Circuit, Support 3.5Mm Headphone Jack Audio Output And Brightness And Display Direction Adjustment..
【 After-Sales Service】The Manual And Installation Instructions Have Been Uploaded To Github, If You Have Any Problems During Use, Please Contact Us At The First Time, We Will Give You A Satisfactory Solution..
Widely Compatible B: Bigtreetech Hdmi5 V1.1 Display Working With Cb1/Cb2, Compatible With Manta M4p/M5p/M8p, Matan Ez E3 Board, It Can Running Klipper Touch Screen Mode..
4Pin Xh2.54 Breakout Port. The 4-Pins Xh2.54 Breakout Port Allows Custom Connection Via Usb Protocol, As Well As Screen Independent Power (Dc 5V), Giving Users More Diy Options..
Widely Compatible A: Btt Hdmi5 V1.1 Ips Lcd Display Compatible With Btt Pi V1.2/Pi 2 Or Cb1/Cb2+Pi4b, Can Working With Skr Mini E3 V3.0/Skr Pico/Skr V1.4 Turbo/Skr 3/Octopus Series/Kraken/Skr Pro V1.2 3D Printer Board, Running Klipper Touch Screen Mode. For Voron, Corexy, Vzbot, I3 3D Printers..
Bigtreetech 5 Inch Hdmi Touch Screen Adopts 5 Inch Ips Capacitive Touch Screen With A Resolution Of 800X480, 160Viewing Angle, Support Up To 5-Point Touch..
Features
- BIGTREETECH HDMI5 touchscreen desinged for users of 3d printers using the Klipper system. HDMI input, suitablec for Raspberry Pi4, PI4B+CB1/CB2, BTT PI V1.2/BTT PI 2, Banana Pi, Windows 10 8 7, and other mini PC.
- BIGTREETECH 5 inch hdmi touch screen adopts 5 inch IPS capacitive touch screen with a resolution of 800x480, 160viewing angle, support up to 5-point touch.
- BTT 5 inch hdmi display built-in audio decoding circuit, support 3.5mm headphone jack audio output and brightness and display direction adjustment.
- Widely Compatible A: BTT HDMI5 V1.1 IPS LCD display compatible with BTT PI V1.2/PI 2 or CB1/CB2+PI4B, can working with SKR Mini E3 V3.0/SKR Pico/SKR V1.4 Turbo/SKR 3/Octopus series/Kraken/SKR Pro V1.2 3D printer board, running Klipper touch screen mode. for Voron, CoreXY, VZbot, I3 3D Printers.
- Widely Compatible B: BIGTREETECH HDMI5 V1.1 display working with CB1/CB2, compatible with Manta M4P/M5P/M8P, Matan EZ E3 board, it can running Klipper touch screen mode.
- 4pin XH2.54 breakout port. The 4-pins XH2.54 breakout port allows custom connection via USB protocol, as well as screen independent power (DC 5V), giving users more DIY options.
- After-sales Service The manual and installation instructions have been uploaded to Github, If you have any problems during use, please contact us at the first time, we will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 4.76 x 2.99 inches
See On Amazon #8
BIGTREETEHCH TFT35 E3 V3.0.1 Touch Screen Display with Two Working Modes Compatible 12864 LCD Display WiFi for Ender 3 CR-10 SKR MINI E3 V3.0/SKR V1.4 Turbo Octopus V1.1 SKR 3 3D Printer Control Board
Asin: B081DTNVPF | Model: tft35 e3 v3.0.1 | PartNumber: tft35 e3 v3.0.1 | Ean: 0787794452504 | UPC: 787794452504
💝【Multi Function Expansion Interface 】Bigtreetech Tft35 E3 V3.0.1 Is A 3D Printer Upgrade That Offers Both Sd Card And Usb Functionality, Reserve The Extension Port Of Filament Breaking Detection,Automatic Shutdown After Printing，Wifi Function Can Be Realized By External Wifi Module Through Wifi Port..
💝【100% Satisfying After-Sales Services】If You Have Any Questions Regarding Bigtreetech Tft35-E3 V3.0.1 Touch Screeen, Please Contact Us On Amazon. Our Technical Supports Team Will Get Back To You Within 24 Hours. 1-Year Warranty Is 100% Guaranteed..
💝【Wide Compatiblity】Not Only Is This Btt Tft35 E3 V3.0.1 Smart Display Compatible With Ender Series Printers,But Can Also Be Used On A Host Of Other 3D Printers Too, As Long As You Are Willing To Print Your Own Enclosure For Other Display Panel Styles,Compatible With Skr Mini E3 V3.0/Octopus/Skr V1.4 Turbo/Skr 3/Skr 3 Ez/Skr Pro V1.2..Etc Motherboard.
💝【Dual Modes】Btt Tft35-E3 V3.0 Display Touch Screen Two Working Modes, Support Uart Serial Port Screen Mode And 12864 Screen Mode Support Two Printing Modes：Sd Card And U Disk With One Catering The Marlin-Style Interface, And The Other Offering A Full Colour Touch Interface With The Option To Switch Between Them Within Seconds While The Machine Is Running..
Features
- Main Control Chip BIGTREETECH TFT35 E3 V3.0.1 touch screen adopts ARM Cortex-M3 series GD32F205VCT6 master controller with 32-bit main frequency of 120MHz, it is designed for ENDER 3 3d printer especially, which can perfectly replace the original LCD screen of Ender 3 Printer.
- Dual Modes btt tft35-e3 v3.0 display touch screen two working modes, support UART serial port screen mode and 12864 screen mode support two printing Modes SD Card and U disk with one catering the Marlin-style interface, and the other offering a full colour touch interface with the option to switch between them within seconds while the machine is running.
- Multi function expansion interface BIGTREETECH TFT35 E3 V3.0.1 is a 3D Printer Upgrade that offers both SD Card and USB functionality, reserve the extension port of filament breaking detection,automatic shutdown after printing WIFI function can be realized by external WIFI module through WIFI port.
- Wide Compatiblity Not only is this BTT TFT35 E3 V3.0.1 smart display compatible with Ender series printers,but can also be used on a host of other 3D Printers too, as long as you are willing to print your own enclosure for other display panel styles,compatible with SKR MINI E3 V3.0/Octopus/SKR V1.4 Turbo/SKR 3/SKR 3 EZ/SKR Pro V1.2..etc motherboard
- 100% Satisfying After-sales Services If you have any questions regarding Bigtreetech TFT35-E3 V3.0.1 touch screeen, please contact us on Amazon. Our technical supports team will get back to you within 24 hours. 1-Year warranty is 100% guaranteed.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
Dimensions: 0.31 x 3.66 x 3.42 Inches
See On Amazon #9
BIGTREETECH DIRECT SKR Mini E3 V2.0 Control Board 32Bit Silent Motherboard Integrated with TMC2209 UART Stepper Motor Driver for Upgraded Ender 3 Ender 3 Pro 3D Printer Control Board
Asin: B089CQ3DHB | Model: ZZB000412 | PartNumber: ZZB000412
🌈【Support Various Functions】Btt Skr Mini E3 V2.0 Control Board Supports Various Function Extensions, Such As, Bltouch, Filament Detection, Resumption Of Shutdown, Shutdown After Shutdown, Etc ..
🌈【Satisfying Customer Services】If You Need Any Information For Skr Mini E3 V2.0, You Could Contact Us On Amazon, And We'll Get Back To You Within 24 Hours..
🌈【Notes】 Pay Attention To Correct Wiring, Avoid Motherboard Contact With Metal Objects, And Take Electrostatic Protection Measures..
🌈【 4 Layers For Board】Bigtreetech Direct Skr Mini E3 V2.0 Increased To 4 Layers On The Control Board's Back, So As To Improve On Heat Dissipation Signal Function And Anti-Interference..
🌈【Better Thermal Dissipation】The Hot-Bed Mos Tube Uses Wsk220n04, Low On-Resistance, Which Reduces Heat Generation. Enlarged Heat Dissipation Area Protects Driving Chip And Components From Problems Caused By Heat Sink..
Features
- Silent Control Board BIGTREETECH DIRECT SKR MINI E3 V2.0 adopts ARM Cortex-M3 series STM32F103RCT6 main control chip with 32-bit CPU 72MHz, integrated with TMC2209 to enhance its stability. It's a super easy drop in replacement for Ender 3 printer.plug and playing.
- Better Thermal Dissipation The hot-bed MOS tube uses WSK220N04, low on-resistance, which reduces heat generation. Enlarged heat dissipation area protects driving chip and components from problems caused by heat sink.
- Support Various Functions BTT SKR MINI E3 V2.0 control board supports various function extensions, such as, BLtouch, filament detection, resumption of shutdown, shutdown after shutdown, etc .
- 4 Layers for Board BIGTREETECH DIRECT SKR MINI E3 V2.0 increased to 4 layers on the control board's back, so as to improve on heat dissipation signal function and anti-interference.
- Satisfying Customer Services If you need any information for SKR MINI E3 V2.0, you could contact us on Amazon, and we'll get back to you within 24 hours.
- Notes Pay attention to correct wiring, avoid motherboard contact with metal objects, and take electrostatic protection measures.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Origianl
Dimensions: 0.39 x 4.00 x 2.80 inches
See On Amazon #10
BIGTREETECH SKR Mini E3 V3.0 Motherboard + TFT35 E3 V3.0.1 Touch Screen Upgrade Kit for Ender-3 Ender-3 Pro 3D Printers, BTT 32-bit Silent Main Board Onboard TMC2209, Support Marlin/Klipper
Asin: B082HBZ3BH | Model: SKR MINI | PartNumber: SKR MINI
🔥【Superior Heat Dissipation】Upgraded Skr Mini E3 V3.0 3D Printer Control Board Is Equipped With A Larger Aluminum Heat Sink Of Stepper Motor Driver Instead Of Pieces Small Heat Sink. Such Design Increases The Heat Dissipation Performance Of Skr Mini E3 V3 By 20%..
🔥【Two Working Modes】Tft35 E3 V3.0.1 Touch Screen Supports Uart Serial Port Screen Mode(Touch Screen Mode) And 12864 Screen Mode. It Can Replace Original Display Of Ender-3 3D Printer. You Can Enjoy Two Printing Modes: Sd Card And U Disk..
🔥【Tft35 E3 V3.0.1 Touch Screen】 Appearance Size: 93*87Mm, Power Input : 5V, This Is A 3.5 Inch Full-Color Screen With Ultra Clear Interface And Responsive Touch. Bigtreetech Tft35 E3 V3.0.1 Display Is Designed For Ender-3 3D Printer Especially, Which Can Be A Drop-In Replacement For Its Original Lcd Screen..
🔥【Diy Friendly Mainboard】Btt Skr Mini E3 V3.0 Motherboard Supports Bltouch, Rgb Lights, Blocking Detection And Shutdown Function. Our Skr Mini E3 V3 Also Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28 V3.0 Touch Screen As Well As Original 12864 Lcd Screen..
Features
- Born for Ende-3 Series Printers Both BIGTREETECH SKR Mini E3 V3.0 mainboard and TFT35 E3 V3.0.1 touch screen are drop-in replacements for Ender-3 (same mouting holes, need to download firmware from GitHub web for update). And they are also compatible with Ende-3 pro, Ender-5, Ender-5 pro 3D printers.
- DIY Friendly Mainboard BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. Our SKR Mini E3 V3 also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
- Superior Heat Dissipation Upgraded SKR MINI E3 V3.0 3d printer control board is equipped with a larger aluminum heat sink of stepper motor driver instead of pieces small heat sink. Such design increases the heat dissipation performance of SKR Mini E3 V3 by 20%.
- TFT35 E3 V3.0.1 Touch Screen Appearance size: 93*87mm, power input : 5V, this is a 3.5 inch full-color screen with ultra clear interface and responsive touch. BIGTREETECH TFT35 E3 V3.0.1 display is designed for ender-3 3d printer especially, which can be a drop-in replacement for its original LCD screen.
- Two Working Modes TFT35 E3 V3.0.1 Touch screen supports UART serial port screen mode(touch screen mode) and 12864 screen mode. It can replace original display of Ender-3 3D printer. You can enjoy two printing modes: SD card and U disk.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #11
BIGTREETECH SKR V1.4 Control Board 32bit Upgrade SKR V1.3 Motherboard, Compatible TFT35/TFT35 E3/TFT70 Touch Screen Mini12864 LCD Support TMC2209/EZ2209/TMC2208/TMC5160 for Most FDM 3D Printer
Asin: B0BHNVFR1M | Model: KINGPRINTER-1020000399 | PartNumber: KINGPRINTER-1020000399
⭐Support 2.4, 2.8, 3.5-Inch Color Touch Screen, Support Lcd2004 Screen, Lcd12864 Screen; Upgrade Configuration Firmware Through Sd Card, Simple, Convenient And Efficient Operation..
⭐On-Board Tmc Driver Spi Working Mode And Uart Working Mode, And The On-Board Diag Function Pins Are Convenient For Customers To Use, Eliminating The Complicated Wiring Process, Which Can Be Used By Simply Removing And Inserting The Jumper Cap; Functions Such As Continuous Power On, Material Detection, Shutdown After Power Off..
⭐It Can Supply Power To Tft Screen, Bltouch, Neo-Pixel By Plugging In An External Dc5v Power Module; In Addition, I2c, Spi, Wifi Interface Is Reserved To Facilitate Customer Diy..
⭐Equipped With Highly Modular Open Source Firmware Marlin 2.0, Which Is Convenient For Users To Diy And Secondary Development..
Features
- Using 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip, the performance is greatly improved.
- Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development.
- Support 2.4, 2.8, 3.5-inch color touch screen, support LCD2004 screen, LCD12864 screen; Upgrade configuration firmware through SD card, simple, convenient and efficient operation.
- It can supply power to TFT screen, BLtouch, Neo-pixel by plugging in an external DC5V power module; in addition, I2C, SPI, WIFI interface is reserved to facilitate customer DIY.
- On-board TMC driver SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap; Functions such as continuous power on, material detection, shutdown after power off.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #12
BIGTREETECH SFS V2.0 Smart Filament Runout Sensor Upgrade Bi-Directional Photoelectric Filament Break Sensor for 1.75mm Filament for SKR Mini E3 V3.0 Manta M8P Octopus Pro BTT Pi Control Board
Asin: B0C77QS4TS | Model: BIGTREETECH SFS V2.0 | PartNumber: BIGTREETECH SFS V2.0
【Wide Compatibility, Easy Installation】Supports Bowden And Direct-Drive Extruders, With 3 Mounting Holes For Easy Mounting To Printer Using Bracket. Support Motherboards With Available Endstop Ports Or Dedicated Filament Runout Ports, Such As Bigtreetech Skr Mini E3 V3.0, Manta E3ez, Manta M8p, Octopus Pro, Etc. Please Consult Our Technical Support Before Using The Motherboard Without Filament Runout Port..
【Instructions For Use】Insert Filament From The Direct Quick Connector In Any Direction Of Smart Filament Sensor; The Red Light Will Illuminate When There Is No Filament In The Module. The Blue Light Will Flash When The Extrusion Is Normal. The Blue Light Will Stay On Or Off When There Is No Extrusion..
【Photoelectric Sensor Technology】Sfs V2.0 Adopts Photoelectric Sensor Technology, With Theoretical Detection Length Of 2.88Mm, Which Is More Accurate Than The 7Mm Of Sfs V1.0. Please Note: 2.88 Mm Is The Minimum Detection Length Required For The Sensor To Function Properly. If You Encounter Problem Of False Triggers, Try Increasing The Detection Length By 1Mm Increments Until The Problem Is Resolved..
【Multifunctional Detection】Sfs V2.0 Detects Extrusion Errors Caused By Filament Runout, Nozzle Clogging, Filament Tying, And Extruder Trouble. It Has Two Signal Outputs And Indicator Lights To Distinguish Between Clogging Or Filament Runout. Small And Lightweight, It Will Not Add Too Much Pressure To The Printer's Extrusion Head..
Features
- Bi-directional Feeding BIGTREETECH SFS V2.0 is bi-directional, there is no restriction on filament direction, giving you guys more flexibility during installation. It suitable for Marlin, Klipper, and RRF firmware.
- Multifunctional Detection SFS V2.0 detects extrusion errors caused by filament runout, nozzle clogging, filament tying, and extruder trouble. It has two signal outputs and indicator lights to distinguish between clogging or filament runout. Small and lightweight, it will not add too much pressure to the printer's extrusion head.
- Wide Compatibility, Easy Installation Supports Bowden and Direct-Drive extruders, with 3 mounting holes for easy mounting to printer using bracket. Support motherboards with available endstop ports or dedicated filament runout ports, such as BIGTREETECH SKR Mini E3 V3.0, Manta E3EZ, Manta M8P, Octopus Pro, etc. Please consult our technical support before using the motherboard without filament runout port.
- Photoelectric Sensor Technology SFS V2.0 adopts photoelectric sensor technology, with theoretical detection length of 2.88mm, which is more accurate than the 7mm of SFS V1.0. Please Note: 2.88 mm is the minimum detection length required for the sensor to function properly. If you encounter problem of false triggers, try increasing the detection length by 1mm increments until the problem is resolved.
- Instructions for use Insert filament from the direct quick connector in any direction of smart filament sensor; The red light will illuminate when there is no filament in the module. The blue light will flash when the extrusion is normal. The blue light will stay on or off when there is no extrusion.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Warranty: 1年保修
See On Amazon #13
BIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Screen, Support DIY Klipper Firmware and Raspberry-Pi Online Printing for Voron V2.4 Upgrade 3D Printer (with 8Pcs TMC2209)
Asin: B09713SRVP | Model: KINGPRINTER-UUU001949 | PartNumber: KINGPRINTER-UUU001949
🐙【Motherboard Expansion Function】Support Bltouch, Locked-Rotor Detection, Shutdown After Printing, Resume Printing After Power Failure, Can Bus, U Disk Function, Iic Expansion; At The Same Time Reserved Wifi Interface, Pt100 Thermistor Interface (Optional), Dual Z-Axis Printer..
🐙【Tmc2209 Driver Mode】Tmc Motor Drivers Can Be Used In Spi Or Uart Mode By Simply Adjusting The Onboard Jumpers Beneath Each Motor Driver. Additionally You Can Connect Or Disconnect The Tmc Diag Pin Using An Onboard Jumper Allowing You To Use Hard Endstops Or Sensorless Homing Without The Need To Cut Any Pins..
🐙【Tmc2209 Driver Features】The Tmc2209 Stepper Driver Is Not Easy To Lose Steps And Is In An Ultra-Quiet Mode; The Module Has A Large Area Of Heat Dissipation Pad, Which Can Reduce The Temperature Of The Driver When It Is Working; The Module Supports Three Modes: Step / Dir And Uart..
🐙【Strong Diy Support】This Motherboard Supports Up To 8 Stepper Drivers With 9 Stepper Driver Outputs In Total; And Up To 6 Pwm Fans And 2 Always-On Fans With The Ability To Individually Select The Voltage Rail That Will Drive Each Fan. Select From Vin, 12V Or 5V..
Features
- Main Control Chip Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
- Strong DIY Support This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
- Motherboard Expansion Function Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional), dual Z-axis printer.
- TMC2209 Driver Features The TMC2209 stepper driver is not easy to lose steps and is in an ultra-quiet mode; the module has a large area of heat dissipation pad, which can reduce the temperature of the driver when it is working; the module supports three modes: STEP / DIR and UART.
- TMC2209 Driver Mode TMC Motor drivers can be used in SPI or UART mode by simply adjusting the onboard jumpers beneath each motor driver. Additionally you can connect or disconnect the TMC DIAG pin using an onboard jumper allowing you to use hard endstops or sensorless homing without the need to cut any pins.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #14
BIGTREETECH TFT35 E3 V3.0.1 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR Mini E3 SKR E3 DIP Board for Ender 3 CR10 3D Printer
Asin: B08181YY8D
❤【More Extension Ports Is Reserved】Tft35 E3 V3.0.1 Display R Eserve The Extension Port Of Filament Breaking Detection,Automatic Shutdown After Printing,Also Wifi Function Can Be Realized By External Wifi Module Through Wifi Port..
❤【Quality Warranty 】Tft35 E3 V3.0.1 Touch Screen Is Designed And Produced By Bigtreetech Team,Any Questions And Feedback About That Please Free To Tell Us, We Have Professional Technical Team To Support You.
❤【Firmware Update】 Tft35 E3 V3.0.1 Is Easy And Convenient To Update Firmware By Sd Card,Download From Our Github, Copy And Save It To Sd Card.Firmware Must Bed Reserved ,Then Re-Plug The Sd Card And Wait To 10S.The Firmware Has Been Successfully Updated..
❤【Two Working Modes】Tft35 E3 V3.0.1 Touch Screen Support Uart Serial Port Screen Mode (Touch Screen Mode) And 12864 Screen Mode, It Can Replace Original Display Of Ender 3 3D Printer. You Can Enjoy Two Printing Modes: Sd Card And U Disk..
Features
- Touch Screen for Ender 3 Appearance size: 93*87mm, power input : 5V. This is a 3.5 inch full-color screen with ultra clear interface and responsive touch, it is designed for ender 3 3d printer especially, which can be a drop-in replacement for its original LCD screen.
- Two Working Modes TFT35 E3 V3.0.1 touch screen support UART serial port screen mode (touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer. You can enjoy two printing modes: SD card and U disk.
- More Extension Ports is Reserved TFT35 E3 V3.0.1 display r eserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port.
- Firmware Update TFT35 E3 V3.0.1 is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated.
- Quality Warranty TFT35 E3 V3.0.1 touch screen is designed and produced by BIGTREETECH team,any questions and feedback about that please free to tell us, we have professional technical team to support you
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #15
BIGTREETECH Upgrade PI TFT50 V2.1 TFT LCD Display DSI 800x480 for Raspberry Pi 4 3 2 Model B RPi 1 B B+ A A+ 3D Printer Controller (5in Capacitive Touch Screen)
Asin: B08FD2YZ23 | Model: ZZB000417 | PartNumber: ZZB000417 | Ean: 0779303890068 | UPC: 779303890068
❤ 【5-Point Touch】 It Supports Raspberry Pi Dsi Display Interface, Comes With A Capacitive Touch Panel, And Supports 5-Point Touch.Capacitive Touch Control ,Better Touch Response,Faster Response Time..
❤【12 Months Warranty】Thank You Very Much For Your Choice And Trust. If You Have Any Questions About The Product, Can You Contact Us First? Give Us The Opportunity To Understand Your Needs, And We Will Do Our Best To Answer Questions And Solve Problems For You..
❤ 【Easy To Install】The Unique Hole Design On The Back Allows You To Install The Raspberry Pi Directly.The Display Adopts Raspberry Pi Power Supply Design, Without External Power Supply..
❤【High Resolution】This 5 Inch Lcd Touch Screen With A Resolution Of 800*480 And A Display Area Of 108X64.8Mm..
Features
- Wide range of applications 5 inch capacitive Touch Screen designed for for pi 4 model B /pi 3 model A+ B+ B/pi 2 model B/pi 1 model B+ A+.
- High resolution This 5 inch LCD touch screen with a resolution of 800*480 and a display area of 108x64.8mm.
- 5-point touch It Supports Raspberry Pi DSI display interface, comes with a capacitive touch panel, and supports 5-point touch.Capacitive Touch Control ,better touch response,faster response time.
- Easy to install The unique hole design on the back allows you to install the Raspberry Pi directly.The display adopts Raspberry Pi power supply design, without external power supply.
- 12 MONTHS WARRANTY Thank you very much for your choice and trust. If you have any questions about the product, can you contact us first? Give us the opportunity to understand your needs, and we will do our best to answer questions and solve problems for you.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIGTREETECH
See On Amazon #16
BIGTREETECH SKR Mini E3 V3.0 Control Board + TFT35 E3 V3.0.1 Graphic Smart Display Panel Board New Upgrade 3D Printer Parts for Ender 3, Ender3 Pro, Ender 3 V2
Asin: B09LCKPV4G | Model: SKR Mini E3 V3.0+TFT35 E3 V3.0.1 | PartNumber: SKR Mini E3 V3.0+TFT35 E3 V3.0.1
【Increased Heat Sink】Redesign The Drive Heat Sink, Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Heat Dissipation Performance;.
【Tft35-E3 V3.0 Screen】 This Touch Screen Panel Board Has Higher Compatibility. Users Can Select Two Work Modes:Uart Serial Port Screen Mode And 12864 Screen Mode;Serial Port Screen Mode Supports Two Printing Modes: Sd Card And U Disk..
【Output Power Supply】Increase Spi Output Port +3.3V Power Supply, External Spi Sensor Power Supply Voltage +3.3V And +5V Are Optional, Support The Motherboard To Directly Supply Power To Peripherals..
【Three Cnc Fan】Increase The Heat Dissipation Controllable Fan To Reduce The Printer Temperature When The Device Is Working;.
Features
- Main Control Chip Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6;
- Three CNC Fan Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;
- Increased Heat Sink Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance;
- Output Power Supply Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.
- TFT35-E3 V3.0 Screen This touch screen panel board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #17
BIGTREETECH SKSM V1.0 SBC Power Protection Module with Current Limiting Protection, Smart Power Outage Detection Compatilbe with Raspberry Pi3, 4B, BTT PI, PI4B+CB1 Core Board Running Klipper
Asin: B0D2HNZXLL | Model: BIGTREETECH SKSM V1.0 | PartNumber: BIGTREETECH SKSM V1.0
✅Current Limiting Protection: Btt Sksm V1.0 Power Shutdown Protection Module With The Current-Limiting Protection Function, It Can Limit The Power Supply Current Of The 3D Printer Motherboard To The Module, Ensure That The Module Will Not Fail To Start Due To Over-Current Protection..
✅Backup Power: Equipped With Two 2.7V 20F Super Capacitors, It Ensures Your Printer Has Enough Power To Save Your Work During An Outage. Comes With Reverse Polarity Protection To Safeguard Against Wrong Connections, Thus Protecting Your Printer’S Circuit Board..
Notes: Bigtreetech Sksm V1.0 Cannot Restart Btt Pi V1.2, Manta Series Motherboards Because The Reset Io Is Not Lead Out And Can Only Be Used For Shutdown Protection And Cannot Achieve Self-Starting After Power Failure. The Reset Pin On The Sksm Can Be Connected To A Host Computer With A Power Reset Function, Such As Btt Pi 2, Raspberry-Pi 4B, To Achieve Power-Off Self-Start. If You Have Any Questions, Please Contact Us And We Will Help You Solve It..
✅Smart Power Outage Detection: It Has A High-Sensitivity Mcu Chip That Can Quickly Detect Power Losses. Small Size, Easier Installation..
✅Power Supply For Raspberry Pi: The Usb-A Port On The Sksm Directly Powers Raspberry Pi3, 4B, Btt Pi V1.2 And Pi4b Adapter+Cb1 V2.2/Cb2, Offering A 5V 2A Output. When Using The Bigtreetech Pi 2 With The Sksm, Please Use A 12V-24V Power Supply. Do Not Use A Type-C 5V Power Supply. For Running Klipper Dc12-24V 3D Printer..
Features
- SBC System Image Protection: BIGTREETECH SKSM V1.0 module designed for Klipper, the SBC can easily be supplied with additional power after the printer is turned of, allowing files to be saved securely before shutdown, thus protecting the SBC system image from damage.
- Power Supply for Raspberry Pi: The USB-A Port on the SKSM directly powers Raspberry Pi3, 4B, BTT PI V1.2 and PI4B Adapter+CB1 V2.2/CB2, offering a 5V 2A output. When using the BIGTREETECH Pi 2 with the SKSM, please use a 12V-24V power supply. Do not use a TYPE-C 5V power supply. For running Klipper DC12-24V 3D Printer.
- Current Limiting Protection: BTT SKSM V1.0 power shutdown protection module with the current-limiting protection function, It can limit the power supply current of the 3D printer motherboard to the module, ensure that the module will not fail to start due to over-current protection.
- Smart Power Outage Detection: It has a high-sensitivity MCU chip that can quickly detect power losses. small size, easier installation.
- Backup Power: Equipped with two 2.7V 20F super capacitors, it ensures your printer has enough power to save your work during an outage. comes with reverse polarity protection to safeguard against wrong connections, thus protecting your printer s circuit board.
- Notes: BIGTREETECH SKSM V1.0 cannot restart BTT PI V1.2, Manta series motherboards because the reset IO is not lead out and can only be used for shutdown protection and cannot achieve self-starting after power failure. The reset pin on the SKSM can be connected to a host computer with a power reset function, such as BTT Pi 2, Raspberry-Pi 4B, to achieve power-off self-start. If you have any questions, please contact us and we will help you solve it.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #18
BIGTREETECH SKR V1.4 Motherboard, 32 Bit DIY 3D Printer Control Board, Support Marlin/Klipper, Compatible with TMC2208/TMC5160/EZ2209 and TFT35 E3/ TFT70/ Mini12864 Touch Screen
Asin: B0D1Y1JMYR
💡【Diy-Friendly】 Bigtreetech Skr V1.4 Is An Ideal Cost-Effective Control Board For Those 3D Diy Enthusiast. It Reserves I2c, Spi And Wifi Interface. When Use The Wifi Module, You Can Use Btt Writer For Firmware Flashing, Serial Port Debugging And So On..
💡【Other Interfaces】Dual Z-Axis Interfaces To Eliminate The Trouble Of External Drive Expansion Module; The Thermistor Interface Is Protected By A Capacitor And A Varistor To Enhance The Resistance Of The Interface. There Are 4 Fan Interfaces On The Board In Total: 1-Way Cnc Fan And.
💡【Reserved Dc Module Interface】Reserved Dcdc Mode V1.0 Power Module Interface To Supply Power To Tft Panel, Bl Touch And Neopixel(Also Reserved Rgb Light Bar Supporting Neopixel Scheme)..
💡【Wide Compatibility】Skr V1.4 Is The Is The Upgraded Version Of Skr V1.3, It Is Compatible With Most Fdm 3D Printers In The Market Such As Ender-3/Ender-3 V2/Ender-3 S1, Cr 10 Etc. It Supports Tft2.4/Tft2.8/Tft3.5 Touch Screen And Also Lcd2004/Lcd12864 Screen; And Compatible With Tmc2208/Tmc2209/Ez2209/Tmc2208/Tmc5160 Stepper Drivers..
Features
- 32 Bit 3D Printer Motherboard BTT SKR V1.4 control board adopts 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip. It comes with Marlin firmware 2.0, and also supports to run Klipper with BTT Pi v1.2 or CB1+Pi4B.
- Wide Compatibility SKR V1.4 is the is the upgraded version of SKR V1.3, it is compatible with most FDM 3D Printers in the market such as Ender-3/Ender-3 V2/Ender-3 S1, CR 10 etc. It supports TFT2.4/TFT2.8/TFT3.5 touch screen and also LCD2004/LCD12864 screen; And compatible with TMC2208/TMC2209/EZ2209/TMC2208/TMC5160 stepper drivers.
- DIY-friendly BIGTREETECH SKR V1.4 is an ideal cost-effective control board for those 3D DIY enthusiast. It reserves I2C, SPI and WiFi interface. When use the WiFi module, you can use BTT Writer for firmware flashing, serial port debugging and so on.
- Reserved DC Module Interface Reserved DCDC Mode V1.0 power module interface to supply power to TFT panel, BL touch and Neopixel(also reserved RGB light bar supporting Neopixel scheme).
- Other Interfaces Dual Z-axis interfaces to eliminate the trouble of external drive expansion module; The thermistor interface is protected by a capacitor and a varistor to enhance the resistance of the interface. There are 4 fan interfaces on the board in total: 1-way CNC fan and
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #19
BIGTREETECH Direct Relay V1.2 Automatic Shutdown Module After Printing Support Resume Printing While Power Off for SKR Mini E3 V3.0 Octopus V1.1 Manta M4P/M5P/M8P/SKR V1.4 Turbo Ender 3 3D Printer
Asin: B07QJ4MZVN | Model: ZZB000239 | PartNumber: ZZB000239 | Ean: 0778601687363 | UPC: 778601687363
Bigtreetech Relay V1.2 Is Easy To Understand, Its Logo Is Clearly Visible And Its Function Is Practical..
Btt Relay V1.2 Compatible With Bigtreetech Skr Mini E3 V3.0/Skr Mini E3 V2.0/Skr V1.4 Turbo/Manta M4p/Mp/M8p/Octopus Pro/Octopus V1.1/Mks Gen L ...3D Printer Control Board.
The Function Is To Automatically Detect Whether The 3D Printing Of The Project Printer Is Completed. When It Is Detected That The Project Is Printed, The Power Can Be Automatically Turned Off. The Goal Is To Create An Automated 3D Printing Environment With Low Carbon Content, Environmental Protection, Energy Savings And Reduced Consumption..
Features
- BIGTREETECH Relay V1.2 module is the first automatic shutdown module independently developed by BIGTREETECH Tecnologia.
- The function is to automatically detect whether the 3D printing of the project printer is completed. When it is detected that the project is printed, the power can be automatically turned off. The goal is to create an automated 3D printing environment with low carbon content, environmental protection, energy savings and reduced consumption.
- BIGTREETECH relay V1.2 is easy to understand, its logo is clearly visible and its function is practical.
- BTT Relay V1.2 Compatible with BIGTREETECH SKR MINI E3 V3.0/SKR MINI E3 V2.0/SKR V1.4 Turbo/Manta M4p/MP/M8P/Octopus pro/Octopus V1.1/MKS GEN L ...3D Printer Control board
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH DIRECT
See On Amazon #20
BIGTREETECH Direct UPS 24V V1.0 Resume Printing While Power Off Module Sensor for SKR V1.4 Turbo SKR Mini E3 V3.0 Octopus V1.1 Manta M4p/M5p Ender-3 CR-10 3D Printer Parts
Asin: B081DLBTQC | Model: ZZB000377 | PartNumber: ZZB000377 | Ean: 0787794452443 | UPC: 787794452443
⚡Logic Voltage: 3.3V Or 5V..
⚡Super Compatibility: Compatible With Most 3D Printer Motherboards On The Market, Such As: Skr Mini E3 V3.0/Skr Mini E3 V2.0/Skr Pico/Octopus Pro/Octopus V1.1/Skr Pro V1.2/Skr V1.4 Turbo/Skr 3/Skr 3 Ez/Manta M4p/M5p/M8p 3D Printer Motherboard..
⚡Support Model: All Dc 24V Powered 3D Printers Are Available Like For Ender-3..
⚡Power Input: 24V..
Features
- Product Name BTT UPS 24V V1.0 Resume Printing While Power Off Module.
- Power Input: 24V.
- Logic Voltage: 3.3V or 5V.
- Support Model: All DC 24V powered 3D printers are available like For Ender-3.
- Super Compatibility: Compatible with most 3D printer motherboards on the market, such as: SKR Mini e3 V3.0/SKR Mini e3 V2.0/SKR Pico/Octopus Pro/Octopus V1.1/SKR Pro V1.2/SKR V1.4 Turbo/SKR 3/SKR 3 EZ/Manta M4P/M5P/M8P 3D Printer motherboard.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon
Looking For Something Else?
Search