Rikon 14In Open Stand Bandsaw
Asin: B07WTNZX6H | Ean: 0814463014517 | UPC: 814463014517
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Rugged Welded Steel Column And Frame.
Resaw Capacity 13″.
Balanced Cast Aluminum Drive Wheels.
New Longer Fence Rail – Heavy Duty Steel Rail 29” Long.
Features
- NEW Tool-less Thumbscrew Bearing Locks No tools needed to adjust guide bearings
- NEW Longer Fence Rail Heavy duty steel rail 29 long
- Rugged welded steel column and frame
- Balanced cast aluminum drive wheels
- Resaw Capacity 13
- See more on Amazon...
Brand: RIKON Power Tools | Manufacturer: RIKON
See On Amazon Similar To Rikon 14In Open Stand Bandsaw
#1
RIKON Power Tools 10-3061 10" Deluxe Bandsaw
Asin: B07WRLZPGV | Model: RIK-10-3061mf | PartNumber: RIK-10-3061mf | Ean: 0814463014944 | UPC: 814463014944
Features
- Includes 10-3061 Deluxe Bandsaw and 5/16 x 70-1/2 6TPI bandsaw blade|Motor: 1/2HP 5.5Amp 110V (60Hz) 1720RPM Blade Speeds: 1515 or 3280 ft/min|Table Size: 13-3/4 x 12-1/2 Table Tilt: 5 degrees left 45 degrees right|Fence Size: 12-1/4 x 2-3/8 Dust Port Size: 2-1/2 OD 2-1/4 ID Base Size: 15-7/8 W x 9-3/8 D Overall Size: 34-1/4 H x 21 W x 16-1/4 D
- See more on Amazon...
Brand: Rikon | Manufacturer: RIKON Power Tools
Dimensions: 18.25 x 12.75 x 35.50 inches
See On Amazon #2
Table Inserts (Pack of 3) for 14" Band saws or Scroll saws,Diameter: 2.5 in, Thickness: 0.1 in.(Please make sure this is your size)
Asin: B07JPD8NW5 | Ean: 6421291831953
2&1/2" X .100 Thick Please Measure Your Saws Recess To Ensure Proper Fit They Fit Delta, Rockwell, Some Jet, Ridgid, Grizzly, And Other Imports..
Important Installation Note:I Have Sold Several Hundred Of These And Occasionally Someone Will Have The Problem Of It Being A Bit Too Large. First Make Sure The Lip Of The Hole Is Free From Dirt. If A Table Alignment Pin,Is Not Tight Or Missing,Often The Blade Mounting Slot Will Close Up Some Over Time Which Reduces The Insert Hole Diameter Slightly. I Tap A Flat Head Screw Driver Into The Blade Installation Slot A Bit To Wedge It Open. That Should Spread The Insert Hole Enough For It To Fit.
Make Sure Your Insert Recess Has The Locating Pin On The Side, Not On The Rear.
Use On 14" Band Saws And 24" Scroll Saws..
Features
- Three inserts to protect your expensive blades Please measure your saw as some Delta & Rockwell &Grizzly14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don't buy it.
- use on 14 Band Saws and 24 Scroll Saws.
- 2&1/2 X .100 thick Please measure your saws recess to ensure proper fit They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
- Make sure your insert recess has the locating pin on the side, not on the rear
- IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
- See more on Amazon...
Brand: palart | Manufacturer: KINNG
See On Amazon #3
Table Inserts (Pack of 2) for 14" Band saws or Scroll saws Diameter: 2.5 in, Thickness: 0.1 in.Please Confirm That The Size You Want to Buy is consistent with This Product
Asin: B07PVZCM78 | Ean: 6443275575363
Use On 14" Band Saws And 24" Scroll Saws.2&1/2" X .100 Thick Please Measure Your Saws Recess To Ensure Proper Fit.
Important Installation Note:I Have Sold Several Hundred Of These And Occasionally Someone Will Have The Problem Of It Being A Bit Too Large. First Make Sure The Lip Of The Hole Is Free From Dirt. If A Table Alignment Pin,Is Not Tight Or Missing,Often The Blade Mounting Slot Will Close Up Some Over Time Which Reduces The Insert Hole Diameter Slightly. I Tap A Flat Head Screw Driver Into The Blade Installation Slot A Bit To Wedge It Open. That Should Spread The Insert Hole Enough For It To Fit.
They Fit Delta, Rockwell, Some Jet, Ridgid, Grizzly, And Other Imports..
Make Sure Your Insert Recess Has The Locating Pin On The Side, Not On The Rear..
Features
- Please measure your saw as some Delta & Rockwell &Grizzly14" bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don't buy it.
- Make sure your insert recess has the locating pin on the side, not on the rear.
- use on 14 Band Saws and 24 Scroll Saws.2&1/2 X .100 thick Please measure your saws recess to ensure proper fit
- They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
- IMPORTANT INSTALLATION NOTE:I have sold several hundred of these and occasionally someone will have the problem of it being a bit too large. First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
- See more on Amazon...
Brand: palart | Manufacturer: KINNG
Dimensions: 0.04 x 2.50 x 2.50 inches
See On Amazon #4
VEVOR Band Saw, 14-Inch, 480-960 RPM Continuously Viable Benchtop Bandsaw, 1100W 1-1/2HP Motor, with Optimized Work Light Workbench Stand Cabinet Assembly and Miter Gauge, for Woodworking Aluminum
Asin: B0CY2BTLYG | Model: Band Saw, 14-Inch, | PartNumber: Band Saw, 14-Inch, | Ean: 0197988565932 | UPC: 197988565932
High-Performance Motor: Our Benchtop Band Saw Features A Powerful 1.5 Hp 1100W Excitation Motor With A Voltage Of 120V. The Silicon Steel Thickness Is 3.62 Inches, And The Outer Diameter Is Φ5.02 Inches. It Also Includes Overheat Protection To Ensure Smooth And Safe Operation Of The Machine..
Optimized Light Position: It Is Designed With Your Everyday Needs In Mind. The Work Light's Position Is Flexible And Easy To Operate, So You Can Adjust It To Illuminate Specific Work Areas Without Worrying About Any Shadows Or Dark Spots, Allowing You To Work With Precision Effortlessly..
Multi-Angle Cutting: The Wood Bandsaw Features A Tilting Table That Can Be Adjusted From 0 To 45°, Allowing For More Flexibility When Cutting. The Sawtable Size Is 15.75 X 21.57 In, Made Of Q235 Steel For Added Strength And Durability. By Tilting The Table 45 Degrees To The Right, You Can Easily Cut Bevels With Precision And Ease..
Continuously Viable: The Benchtop Bandsaw Comes With A Continuously Variable Speed Control Function, Allowing Users To Easily Adjust The Speed To Their Specific Needs. It Has A Maximum Speed Of 960 Rpm And A Minimum Speed Of 480 Rpm, Which Can Be Effortlessly Adjusted..
Features
- Impeccable Cutting Proficiency: Are you ready to cut into an unbelievable experience? The woodworking bandsaw can cut a variety of materials, such as wood, metal, copper, aluminum, plastic, and more, with a maximum cutting height of 6 inches. Max. Throat Width: 13.39 in / 340 mm, Max. Cutting Height: 13 in / 330 mm, Max.Sawblade Speeds: 1050 m/min.
- Continuously Viable: The benchtop bandsaw comes with a continuously variable speed control function, allowing users to easily adjust the speed to their specific needs. It has a maximum speed of 960 RPM and a minimum speed of 480 RPM, which can be effortlessly adjusted.
- High-performance Motor: Our benchtop band saw features a powerful 1.5 HP 1100W excitation motor with a voltage of 120V. The silicon steel thickness is 3.62 inches, and the outer diameter is 5.02 inches. It also includes overheat protection to ensure smooth and safe operation of the machine.
- Multi-angle Cutting: The wood bandsaw features a tilting table that can be adjusted from 0 to 45 , allowing for more flexibility when cutting. The sawtable size is 15.75 x 21.57 in, made of Q235 steel for added strength and durability. By tilting the table 45 degrees to the right, you can easily cut bevels with precision and ease.
- Optimized Light Position: It is designed with your everyday needs in mind. The work light's position is flexible and easy to operate, so you can adjust it to illuminate specific work areas without worrying about any shadows or dark spots, allowing you to work with precision effortlessly.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 53.15 x 18.50 x 21.65 inches | Weight: 219.00 Pounds
See On Amazon #5
RIKON Power Tools 10-326 14" Deluxe Bandsaw
Asin: B01D35Z3PU | Model: 10-326 | PartNumber: 10-326 | Ean: 0814463012803 | UPC: 814463012803
Quick-Adjust Rip Fence – Adjusts For Drift With The Simple Turning Of A Few Knobs! No Tools Needed.
Extra Tall Rip Fence – Increased Fence And Re-Saw Bar Heights Of 6” Give Added Support Of Lumber Being Ripped Or Re-Sawn.
Quick-Lock Table Trunnion System – Handy Lever And Gear Unlock And Set Table Angles In Seconds!.
Spring Loaded, Tool-Less Blade Guides – Easy & Fast Setting Of The Guides Without Wrenches!.
Features
- Three Innovative, Patent Pending features make adjusting this redesigned band saw easier than ever before!
- Spring Loaded, Tool-Less Blade Guides easy & fast setting of the guides without wrenches!
- Quick-Adjust Rip Fence adjusts for drift with the simple turning of a few knobs! No tools needed
- Quick-Lock Table Trunnion System handy lever and gear unlock and set table angles in seconds!
- Extra Tall Rip Fence Increased fence and re-saw bar heights of 6 give added support of lumber being ripped or re-sawn
- See more on Amazon...
Brand: RIKON Power Tools | Manufacturer: RIKON
Dimensions: 75.00 x 30.00 x 25.00 inches | Weight: 274.00 Pounds
Warranty: 5 years
See On Amazon #6
WEN Metal Band Saw with Stand (BA4664), Black
Asin: B09XWDLKCJ | Model: BA4664 | PartNumber: BA4664 | Ean: 0044459046646 | UPC: 044459046646
Adjust The Blade Speed To 80, 120 Or 200 Feet Per Minute For Compatibility With A Variety Of Metals.
Includes A Stand With Wheels, A Pre-Installed Blade, A 4.6 Amp Motor And A 2-Year Warranty.
Mitering Vise Helps Create Cuts Anywhere From 0 To 45 Degrees.
Capable Of Operating In Both Vertical And Horizontal Positions.
Features
- Automatic shut-off turns the band saw off after a cut has been completed
- Capable of operating in both vertical and horizontal positions
- Adjust the blade speed to 80, 120 or 200 feet per minute for compatibility with a variety of metals
- Mitering vise helps create cuts anywhere from 0 to 45 degrees
- Includes a stand with wheels, a pre-installed blade, a 4.6 amp motor and a 2-year warranty
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 38.00 x 37.00 x 20.50 inches | Weight: 118.00 pounds
See On Amazon #7
Table Inserts for 12"/14" Band saws Insert or Scroll saws (Diameter: 2.75 in, Thickness: 0.2 in) 5Pack
Asin: B0CKNZL721 | Model: da-cha-kou | PartNumber: da-cha-kou | Ean: 6955082370722
◆ Before Purchasing, Measure The Saw Table Inserts On Your Bandsaw To Make Sure Your Bandsaw Can Accommodate 2-3/4" Diameter Inserts..
◆ Important Installation Note: First Make Sure The Lip Of The Hole Is Free From Dirt. If A Table Alignment Pin,Is Not Tight Or Missing,Often The Blade Mounting Slot Will Close Up Some Over Time Which Reduces The Insert Hole Diameter Slightly. I Tap A Flat Head Screw Driver Into The Blade Installation Slot A Bit To Wedge It Open. That Should Spread The Insert Hole Enough For It To Fit.
◆ Please Measure Your Saw As Some Bandsaws Has Slightly Smaller Holes For The Throat Plate. If So Some Slight Filing Or Sanding May Be Required.If You Mind, Please Don't Buy It..
Features
- 5 Pack Band Saw Table Saw Table Insert P/N 1-JL20031002 for Sears Crafsman 124.32607, 119.224000, 119.224010, 351.214000, 351.224010
- Please measure your saw as some bandsaws has slightly smaller holes for the throat plate. If so some slight filing or sanding may be required.If you mind, please don't buy it.
- Before purchasing, measure the saw table inserts on your bandsaw to make sure your bandsaw can accommodate 2-3/4 diameter inserts.
- IMPORTANT INSTALLATION NOTE: First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
- See more on Amazon...
Brand: Yeivzwba | Manufacturer: Yeivzwba
Dimensions: 2.75 x 0.10 x 2.75 inches
See On Amazon #8
Denkuhin Table Inserts For 14 Inch Band Saws Or Scroll Saws (Aluminum, Diameter: 2.5 In, Thickness: 0.1 In)-Compatible With Delta/Rockwell Replace Part-3 PCS
Asin: B0CLNMQCB2 | Model: Table Inserts For 14 Inch Band Saws | PartNumber: Table Inserts For 14 Inch Band Saws
✨Service Installation: Note That The Installation Of This Product Requires Cleaning To Ensure That The Hole Lip Is Free Of Dirt. When The Table Positioning Pin Is Not Tight Or Missing, The Blade Mounting Slot Tends To Close Over Time, Resulting In A Slight Reduction In The Diameter Of The Insertion Hole. You Can Use A Flat-Head Screwdriver To Gently Tap The Blade Mounting Slot To Wedge It Open. This Should Open Up The Insertion Hole Enough To Make It Large Enough.Make Sure Your Insert Recess Has The Locating Pin On The Side, Not On The Rear..
✨Function: Three Red Saw Blades Can Play An Effective Role In Protecting The Saw Blade, Please Measure Your Band Saw When Using The Protective Saw Blade, If Some Band Saws Have Slightly Smaller Throat Holes, It May Need To Be Slightly Filed Or Polished..
✨Size: (Diameter: 2.5 In, Thickness: 0.1 In, 3Pack), Make Sure Your Insert Recess Has The Locating Pin On The Side, Not On The Rear..
✨Compatible With: They Fit Delta, Rockwell, Some Jet, Ridgid, Grizzly, And Other Imports. If Some Of The Band Saws Have Slightly Smaller Throat Plate Holes. If This Is The Case, It May Need To Be Filed Or Sanded Slightly..
Features
- PRODUCT FEATURE: Use on 14" band saws and 24" scroll saws. table inserts, replace part 426-02-063-0001 426-02-063-0002.
- COMPATIBLE WITH: They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports. If some of the band saws have slightly smaller throat plate holes. If this is the case, it may need to be filed or sanded slightly.
- SERVICE INSTALLATION: Note that the installation of this product requires cleaning to ensure that the hole lip is free of dirt. When the table positioning pin is not tight or missing, the blade mounting slot tends to close over time, resulting in a slight reduction in the diameter of the insertion hole. You can use a flat-head screwdriver to gently tap the blade mounting slot to wedge it open. This should open up the insertion hole enough to make it large enough.Make sure your insert recess has the locating pin on the side, not on the rear.
- SIZE: (Diameter: 2.5 in, Thickness: 0.1 in, 3pack), make sure your insert recess has the locating pin on the side, not on the rear.
- FUNCTION: Three red saw blades can play an effective role in protecting the saw blade, please measure your band saw when using the protective saw blade, if some band saws have slightly smaller throat holes, it may need to be slightly filed or polished.
- See more on Amazon...
Brand: Denkuhin | Manufacturer: Denkuhin
Dimensions: 0.20 x 0.20 x 0.20 inches
See On Amazon #9
Table Inserts for 14 inch Band Saws or Scroll Saws, Compatible with Delta/Rockwell Replace Part-2 PCS Diameter: 2.5 in, Thickness: 0.1 in
Asin: B0BRR71XBG | Model: 14 inch Scroll Saws Blade | PartNumber: 14 inch Scroll Saws Blade
🌈 Important Tips: First Make Sure The Lip Of The Hole Is Free From Dirt. If A Table Alignment Pin,Is Not Tight Or Missing,Often The Blade Mounting Slot Will Close Up Some Over Time Which Reduces The Insert Hole Diameter Slightly. I Tap A Flat Head Screw Driver Into The Blade Installation Slot A Bit To Wedge It Open. That Should Spread The Insert Hole Enough For It To Fit.
🌈 Some Delta & Rockwell & Grizzly 14" Bandsaws Has Slightly Smaller Holes For The Throat Plate..
🌈 Install Use: Make Sure Your Insert Recess Has The Locating Pin On The Side, Not On The Rear. Size: （Diameter: 2.5 In, Thickness: 0.1 In）.
🌈 Compatible: They Fit Delta, Rockwell, Jet, Ridgid, Grizzly.
Features
- Use on 14" Band Saws and 24" Scroll Saws. some feedbacks say a little big, so some slight filing or sanding may be required. if you mind ,please don't buy it, but normally, it can perfect fit for your saws
- Compatible: They fit Delta, Rockwell, Jet, Ridgid, Grizzly
- Important Tips: First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
- Install Use: Make sure your insert recess has the locating pin on the side, not on the rear. Size: Diameter: 2.5 in, Thickness: 0.1 in
- Some Delta & Rockwell & Grizzly 14 bandsaws has slightly smaller holes for the throat plate.
- See more on Amazon...
Brand: RURBRIN | Manufacturer: Ultraseals
See On Amazon #10
Delta 28-400 14 in. 1 HP Steel Frame Band Saw
Asin: B00812RFNO | Model: 28-400 | PartNumber: 28-400 | Ean: 0847962004819 | UPC: 847962004819
Two-Speed Pulley With Easy Tensioning System.
Oversized 15 3/4 In. X 18 7/8 In. Precision Ground Cast Iron Table With T-Slot Miter Capability Tilts 3° Left To 45° Right With A Positive Stop At 90°.
Durable Aluminum, Rubber-Coated Upper And Lower 9 Spoke Wheels Are Precision Balanced For Superior Blade Tracking.
1 Hp, 115V/230V, 1 Phase Tefc Motor With 2 Speeds: 1,620 Fpm And 3,340 Fpm For Wood And Non-Ferrous Metal Cutting.
Features
- Heavy duty steel frame design reduces flexing and features a superior finish and aluminum trunnion table support for long-lasting durability
- 1 HP, 115V/230V, 1 phase TEFC motor with 2 speeds: 1,620 FPM and 3,340 FPM for wood and non-ferrous metal cutting
- Two-speed pulley with easy tensioning system
- Durable aluminum, rubber-coated upper and lower 9 spoke wheels are precision balanced for superior blade tracking
- Oversized 15 3/4 in. x 18 7/8 in. precision ground cast iron table with t-slot miter capability tilts 3 left to 45 right with a positive stop at 90
- See more on Amazon...
Brand: Delta Power Equipment Corp | Manufacturer: Delta Power Equipment Corporation
Dimensions: 21.00 x 45.00 x 18.00 Inches | Weight: 165.00 Pounds
Warranty: 5 year parts and labor warranty.
See On Amazon #11
RIKON Professional 10-Inch Steel Band Saw Stand
Asin: B002FB74VU | Model: 13-913 | PartNumber: 13-913 | Ean: 0856489000396, 7241870503618 | UPC: 856489000396
Slip Prevention - Non-Slip Rubber Tips On Each Of The Stand's Four Legs Keep It Securely In Place During Use. The Rubber Tips Also Protect Your Floor Or Shop Surface. Four Support Braces And Carefully Designed Leg Angles Provide Additional Stability..
Easy To Store - The Stand Features Solid Steel Construction That Offers A Stable Foundation, It Also Boasts A Lightweight Design. It Takes Up Less Space Than Cabinet-Style Stands, Making It An Efficient Addition To Your Workspace..
Use Right Away - The Stand Is Designed For Easy Assembly And Comes With All Necessary Hardware..
Band Saw Stand - Designed To Fit Rikon 10-300/10-305 And Sears 921400 Bandsaws..
Features
- STAINLESS STEEL - This sturdy band saw stand is constructed from solid steel and provides reliable, sturdy support for effective operation of your band saws.
- BAND SAW STAND - Designed to fit RIKON 10-300/10-305 and Sears 921400 bandsaws.
- SLIP PREVENTION - Non-slip rubber tips on each of the stand's four legs keep it securely in place during use. The rubber tips also protect your floor or shop surface. Four support braces and carefully designed leg angles provide additional stability.
- USE RIGHT AWAY - The stand is designed for easy assembly and comes with all necessary hardware.
- EASY TO STORE - The stand features solid steel construction that offers a stable foundation, it also boasts a lightweight design. It takes up less space than cabinet-style stands, making it an efficient addition to your workspace.
- See more on Amazon...
Brand: RIKON Power Tools | Manufacturer: Rikon
Dimensions: 2.90 x 26.00 x 4.00 inches | Weight: 12.98 pounds
See On Amazon #12
Peachtree Woodworking RIKON BANDSAW INSERT - 3 PACK
Asin: B00J9TO3ZQ | Model: P2113 | PartNumber: P2113 | Ean: 0814310014486 | UPC: 814310014486
Prevent Small Pieces From Falling Down Between Your Blade & The Lower Wheel.
Bandsaw Zero Clearance Inserts Reduce Splintering And Tear Out2-3/4" Dia. X 11/64" Thick.
Prevents Kick-Backs..
Features
- 2-3/4" dia. x 3/16"" thickBandsaw zero clearance inserts reduce splintering and tear out
- Prevents kick-backs.
- Prevent small pieces from falling down between your blade & the lower wheel
- Bandsaw zero clearance inserts reduce splintering and tear out2-3/4 dia. x 11/64 thick
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: Peachtree Woodworking
See On Amazon #13
WEN (BA1487) Band Saw with Stand,Two-Speed,Black,14-Inch
Asin: B09XWWPY17 | Model: BA1487 | PartNumber: BA1487 | Ean: 0044459014881 | UPC: 044459014881
Spacious 21-1/2 X 15-3/4-Inch Work Table Bevels Up To 45 Degrees.
Includes A Blade Tension Gauge, A Circle Cutting Guide, A Flexible Work Light, A 3-In-1 Dust Port, A Fence, A 1/2-Inch Blade, And A Miter Gauge.
Operates At Two Speeds Of Either 1480 Or 3280 Fpm.
Uses 100-3/4-Inch Blades Anywhere From 1/8 To 1 Inch Wide.
Features
- 9.5-amp motor creates cuts up to 8.85 inches deep and 13-3/8 inches wide
- Uses 100-3/4-inch blades anywhere from 1/8 to 1 inch wide
- Spacious 21-1/2 x 15-3/4-inch work table bevels up to 45 degrees
- Operates at two speeds of either 1480 or 3280 FPM
- Includes a blade tension gauge, a circle cutting guide, a flexible work light, a 3-in-1 dust port, a fence, a 1/2-inch blade, and a miter gauge
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 2.00 x 15.00 x 3.00 inches | Weight: 138.89 pounds
See On Amazon #14
RIKON Professional Miter Gauge, 13-912
Asin: B002FB74VK | Model: 13-912 | PartNumber: 13-912 | Ean: 0856489000235, 0733353103011, 7241870668911 | UPC: 733353103011, 856489000235
Standard T-Slot - Correct Your Cuts With This Adjustable Aluminum Support Plate. It Fits Standard T-Slot ¾” X ⅜” Miter Slots..
Easy To Use - Don’T Ever Make A Mistake Cutting A Straight Line Again. This Miter Gauge Is Easy To Use And You Will See Results Immediately..
Versatile - Whether You Have A Band Saw Or Table Saw This Miter Gauge Will Work Well And Help You Achieve The Perfect Cut..
Features
- MITER GAUGE - This adjustable aluminum support plate is a perfect locking mechanism and helps your workpiece cut at the precise angle you want.
- VERSATILE - Whether you have a band saw or table saw this miter gauge will work well and help you achieve the perfect cut.
- STANDARD T-SLOT - Correct your cuts with this adjustable aluminum support plate. It fits standard T-slot x miter slots.
- EASY TO USE - Don t ever make a mistake cutting a straight line again. This miter gauge is easy to use and you will see results immediately.
- See more on Amazon...
Brand: RIKON Power Tools | Manufacturer: Rikon
Dimensions: 2.30 x 12.20 x 4.70 inches | Weight: 1.50 pounds
Warranty: 30 Days
See On Amazon #15
RIKON Power Tools 10-324 14" Open Stand Bandsaw
Asin: B01D35Z3HI | Model: 10-324 | PartNumber: 10-324 | Ean: 0814463012780 | UPC: 814463012780
Extra Tall Rip Fence – Increased Fence And Re-Saw Bar Heights Of 6" Give Added Support Of Lumber Being Ripped Or Re-Sawn.
Takes 111” Blades – Band Saw Accepts All Styles Of 111” Long Blades From 3/16” To 3/4” In Width.
Rear 115V Power Outlet – Handy Electrical Outlet For Plugging In Lights, Radios, Phone Chargers And More.
Rack And Pinion Guide Post – Adjust The Cutting Depth Easily With The Turn Of A Knob. New Inch Scale Helps Set Guide Heights.
Features
- Ball-Bearing Blade Guides - Upper and lower ball-bearing blade guides and thrust bearings reduce friction, increase blade life and contribute to the smooth operation of the machine during cuts
- Rack and Pinion Guide Post Adjust the cutting depth easily with the turn of a knob. New inch scale helps set guide heights
- Extra Tall Rip Fence Increased fence and re-saw bar heights of 6 give added support of lumber being ripped or re-sawn
- Rear 115V Power Outlet Handy electrical outlet for plugging in lights, radios, phone chargers and more
- Takes 111 Blades Band saw accepts all styles of 111 long blades from 3/16 to 3/4 in width
- See more on Amazon...
Brand: RIKON Power Tools | Manufacturer: RIKON
Dimensions: 75.00 x 30.00 x 25.00 inches | Weight: 215.00 Pounds
Warranty: 5 years
See On Amazon #16
Thaekuns Table Inserts (Pack of 4) for 14" Band saws or Scroll saws Diameter: 2.5 in, Thickness: 0.1 in
Asin: B0BVM12X51 | Model: 426-02-063-0001 | PartNumber: 426-02-063-0001
⭐Diameter: 2.5 Inch, Thickness: 0.1 Inch. Please Measure Your Saws Recess To Ensure Proper Fit.
⭐Make Sure Your Insert Recess Has The Locating Pin On The Side, Not On The Rear..
⭐Important Installation Note: First Make Sure The Lip Of The Hole Is Free From Dirt. If A Table Alignment Pin,Is Not Tight Or Missing,Often The Blade Mounting Slot Will Close Up Some Over Time Which Reduces The Insert Hole Diameter Slightly. I Tap A Flat Head Screw Driver Into The Blade Installation Slot A Bit To Wedge It Open. That Should Spread The Insert Hole Enough For It To Fit.
⭐They Fit Delta, Rockwell, Some Jet, Ridgid, Grizzly, And Other Imports..
⭐Use On 14" Band Saws And 24" Scroll Saws..
Features
- Brand New - Unused Parts
- use on 14 Band Saws and 24 Scroll Saws.
- Diameter: 2.5 inch, Thickness: 0.1 inch. Please measure your saws recess to ensure proper fit
- They fit Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
- Make sure your insert recess has the locating pin on the side, not on the rear.
- IMPORTANT INSTALLATION NOTE: First make sure the lip of the hole is free from dirt. If a table alignment pin,is not tight or missing,often the blade mounting slot will close up some over time which reduces the insert hole diameter slightly. I tap a flat head screw driver into the blade installation slot a bit to wedge it open. That should spread the insert hole enough for it to fit
- See more on Amazon...
Brand: Thaekuns | Manufacturer: Gadgetool
See On Amazon #17
VEVOR Band Saw with Stand, 10-Inch, 560 & 1100 RPM Two-Speed Benchtop Bandsaw, 370W 1/2HP Motor with Metal Stand Optimized Work Light Workbench Fence and Miter Gauge, for Woodworking
Asin: B0BZYS4HF7 | Model: HBS250 | PartNumber: HBS250 | Ean: 0840281575275 | UPC: 840281575275
Multi-Angle Cutting: The Wood Bandsaw Features A Tilting Table That Can Be Adjusted From 0 To 45°, Allowing For More Flexibility When Cutting. The Sawtable Size Is 13.39 X 13.19 In, Made Of Q235 Steel For Added Strength And Durability. By Tilting The Table 45 Degrees To The Right, You Can Easily Cut Bevels With Precision And Ease..
Save Space In No Time: The Tabletop Bandsaw Is Equipped With A Stand That Raises The Machine To A Comfortable Height For Easier Use. It Also Includes Storage Space, Making It Convenient For You To Store Your Tools And Keep Them Within Reach. Connect A Dust Collector To The Saw To Keep Your Jobsite Clean..
Optimized Light Position: It Is Designed With Your Everyday Needs In Mind. The Work Light's Position Is Flexible And Easy To Operate, So You Can Adjust It To Illuminate Specific Work Areas Without Worrying About Any Shadows Or Dark Spots, Allowing You To Work With Precision Effortlessly..
Two-Speed Adjustable: The Benchtop Band Saw Comes With A High-Performance Motor That Can Deliver A Powerful 1/2 Hp 370W Output While Providing Overheat Protection For Added Security. The Benchtop Band Saw Features An 1100 Rpm Maximum Speed And 560 Rpm Minimum Speed, Accommodating Their Specific Needs..
Features
- Impeccable Cutting Proficiency: Are you ready to cut into an unbelievable experience? The woodworking bandsaw can cut wood with a maximum cutting height of 6 inches. Max. Throat Width: 9.65 in / 245 mm, Sawblade Length: 72.13 in / 1832 mm, Max.Sawblade Speed: 890 m/min 10%.
- Two-speed Adjustable: The benchtop band saw comes with a high-performance motor that can deliver a powerful 1/2 HP 370W output while providing overheat protection for added security. The benchtop band saw features an 1100 RPM maximum speed and 560 RPM minimum speed, accommodating their specific needs.
- Multi-angle Cutting: The wood bandsaw features a tilting table that can be adjusted from 0 to 45 , allowing for more flexibility when cutting. The sawtable size is 13.39 x 13.19 in, made of Q235 steel for added strength and durability. By tilting the table 45 degrees to the right, you can easily cut bevels with precision and ease.
- Optimized Light Position: It is designed with your everyday needs in mind. The work light's position is flexible and easy to operate, so you can adjust it to illuminate specific work areas without worrying about any shadows or dark spots, allowing you to work with precision effortlessly.
- Save Space in No Time: The tabletop bandsaw is equipped with a stand that raises the machine to a comfortable height for easier use. It also includes storage space, making it convenient for you to store your tools and keep them within reach. Connect a dust collector to the saw to keep your jobsite clean.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 62.20 x 23.62 x 19.69 inches
See On Amazon #18
WEN Metal Band Saw, Benchtop (BA4555), Black
Asin: B09XWQCNGT | Model: BA4555 | PartNumber: BA4555 | Ean: 0044459045557 | UPC: 044459045557
Cut Pipes Up To 5 Inches In Diameter Or Rectangular Materials Up To 5 X 4-7/8 Inches In Size.
Backed By A Two-Year Warranty.
Compact Design Makes For Easy Storage And Transportation.
Beveling Blade Helps Create Cuts Anywhere From 0 To 60 Degrees.
Features
- Adjust the blade speed anywhere from 125 to 260 feet per minute for compatibility with a variety of metals
- Beveling blade helps create cuts anywhere from 0 to 60 degrees
- Cut pipes up to 5 inches in diameter or rectangular materials up to 5 x 4-7/8 inches in size
- Compact design makes for easy storage and transportation
- Backed by a two-year warranty
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 4.00 x 7.00 x 5.00 inches
See On Amazon #19
RIKON Power Tools 70-920 Universal Mini Lathe Stand
Asin: B00SOR474Q | Model: 70-920 | PartNumber: 70-920 | Ean: 0814463011912 | UPC: 814463011912
Working Height Adjusts From 24-1/2" To 34-1/2" Height From The Ground.
Length Adjusts From 23-1/2" To 37-1/4".
Features
- Steel stand fits variety of mini and midi lathe models
- Length adjusts from 23-1/2 to 37-1/4
- Working height adjusts from 24-1/2 to 34-1/2 height from the ground
- See more on Amazon...
Brand: RIKON Power Tools | Manufacturer: Scheppach
Dimensions: 34.50 x 37.25 x 7.69 inches | Weight: 50.00 pounds
See On Amazon #20
VEVOR Band Saw with Stand, 10-Inch, 560 & 1100 RPM Two-Speed Benchtop Bandsaw, 370W 1/2HP Motor with Metal Stand Optimized Work Light Workbench Fence and Miter Gauge, for Woodworking Aluminum Plastic
Asin: B0CQ29RMTZ | Model: HBS250 | PartNumber: HBS250 | Ean: 0197988558491 | UPC: 197988558491
Multi-Angle Cutting: The Wood Bandsaw Features A Tilting Table That Can Be Adjusted From 0 To 45°, Allowing For More Flexibility When Cutting. The Sawtable Size Is 13.39 X 13.19 In, Made Of Q235 Steel For Added Strength And Durability. By Tilting The Table 45 Degrees To The Right, You Can Easily Cut Bevels With Precision And Ease..
Save Space In No Time: The Tabletop Bandsaw Is Equipped With A Stand That Raises The Machine To A Comfortable Height For Easier Use. It Also Includes Storage Space, Making It Convenient For You To Store Your Tools And Keep Them Within Reach. Connect A Dust Collector To The Saw To Keep Your Jobsite Clean..
Optimized Light Position: It Is Designed With Your Everyday Needs In Mind. The Work Light's Position Is Flexible And Easy To Operate, So You Can Adjust It To Illuminate Specific Work Areas Without Worrying About Any Shadows Or Dark Spots, Allowing You To Work With Precision Effortlessly..
Two-Speed Adjustable: The Benchtop Band Saw Comes With A High-Performance Motor That Can Deliver A Powerful 1/2 Hp 370W Output While Providing Overheat Protection For Added Security. The Benchtop Band Saw Features An 1100 Rpm Maximum Speed And 560 Rpm Minimum Speed, Accommodating Their Specific Needs..
Features
- Impeccable Cutting Proficiency: Are you ready to cut into an unbelievable experience? The woodworking bandsaw can cut a variety of materials, such as wood, metal, copper, aluminum, plastic, and more, with a maximum cutting height of 6 inches. Max. Throat Width: 9.65 in / 245 mm, Sawblade Length: 72.13 in / 1832 mm, Max.Sawblade Speed: 890 m/min 10%.
- Two-speed Adjustable: The benchtop band saw comes with a high-performance motor that can deliver a powerful 1/2 HP 370W output while providing overheat protection for added security. The benchtop band saw features an 1100 RPM maximum speed and 560 RPM minimum speed, accommodating their specific needs.
- Multi-angle Cutting: The wood bandsaw features a tilting table that can be adjusted from 0 to 45 , allowing for more flexibility when cutting. The sawtable size is 13.39 x 13.19 in, made of Q235 steel for added strength and durability. By tilting the table 45 degrees to the right, you can easily cut bevels with precision and ease.
- Optimized Light Position: It is designed with your everyday needs in mind. The work light's position is flexible and easy to operate, so you can adjust it to illuminate specific work areas without worrying about any shadows or dark spots, allowing you to work with precision effortlessly.
- Save Space in No Time: The tabletop bandsaw is equipped with a stand that raises the machine to a comfortable height for easier use. It also includes storage space, making it convenient for you to store your tools and keep them within reach. Connect a dust collector to the saw to keep your jobsite clean.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 19.69 x 62.20 x 19.69 inches | Weight: 61.00 pounds
See On Amazon
Looking For Something Else?
Search