Comimark 1Pcs MIDI Shield Breakout Board for R3 AVI PIC Digital Interface Adapter
Asin: B07X44L1T4 | Model: LY469 | PartNumber: LY469 | Ean: 0657835700867 | UPC: 657835700867
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Compatible: 100% Compatible.
We Highly Appreciate All Customers Opinions To Improve The Selling, Also If Anything You Unsatisfied, Please Contact Us For Probable Best Solution..
Package Included: 1Pcs Module.
Midi Adapter Plate Provides Midi - In And Midi - Out Connection, And Midi Thru Port. Midi - Port Is Light In Isolation, To Prevent The Ground Loop..
Features
Through the MIDI adapter plate, your board or other microcontrollers can be accessed to powerful MIDI communication protocol. MIDI protocol and asynchronous serial interface has many similarities, so users can use the micro-controller UART pin to send MIDI event information.
- MIDI adapter plate provides MIDI - IN and MIDI - OUT connection, and MIDI THRU port. MIDI - port is light IN isolation, to prevent the ground loop.
- Compatible: 100% compatible
- Package Included: 1pcs Module
- We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark
See On Amazon Similar To Comimark 1Pcs MIDI Shield Breakout
#1
Ultra-Small GPIO Terminal Block Breakout Board Module for Arduino UNO R3
Asin: B08XWCN43C | Model: MD-D1408-1 | PartNumber: MD-D1408-1 | Ean: 6954525591861
Fr-4 Fiber Glass Pcb, Dual Copper Layers..
Packing List: 2X(1 Set, A And B Each One) Terminal Block Breakout Modules, 4X 11Mm Nylon Standoffs. 4X 6Mm Nylon Standoffs. 4X Nylon Nuts, 1X Small Slotted Screwdriver (Note: The Item Not Include Arduino Uno Module)..
Pin Header Connect To Arduino Board. The Breakout Board Is Firmly Fixed To Arduino-Uno Through Standoffs And Nut, And Will Not Shake..
Terminal Block Pitch 2.54Mm/0.1", Wire Size Range 28Awg To 18Awg, Strip Length 4.5Mm, Screw M1.6 Steel, Pin Header And Cage Copper..
Features
- The item has been soldered and assembled. Support for Arduino Uno R3.
- Terminal block pitch 2.54mm/0.1, wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper.
- FR-4 fiber glass PCB, dual copper layers.
- Pin header connect to Arduino board. The breakout board is firmly fixed to Arduino-Uno through standoffs and nut, and will not shake.
- Packing list: 2x(1 set, A and B each one) terminal block breakout modules, 4x 11mm nylon standoffs. 4x 6mm nylon standoffs. 4x nylon nuts, 1x small slotted screwdriver (NOTE: the item not include Arduino Uno module).
- See more on Amazon...
Brand: OONO | Manufacturer: CZH-LABS
See On Amazon #2
Gikfun Prototype Shield DIY KIT for Arduino UNO R3 Mega 328P (Pack of 3 Sets) Ek1038x3
Asin: B00Q9YB7PI | Model: LYSB00Q9YB7PI-ELECTRNCS | PartNumber: LYSB00Q9YB7PI-ELECTRNCS | Ean: 0707948005615 | UPC: 707948005615
Gold Plated Finish Prevents Oxidation, High Quality Gold Finish For Easy Soldering. All Holes Are Through-Plated For Strength.
It's Got Extra Connections For All Of The Arduino I/O Pins, And It's Got Space To Mount Through-Hole And Surface Mount Integrated Circuits. It's A Convenient Way To Make Your Custom Circuit And Arduino Into A Single Module..
The Prototyping Shield Makes It Easy For You To Design Custom Circuits. You Can Solder Parts To The Prototyping Area To Create Your Project, Or Use It With A Small Solderless Breadboard (Not Included) To Quickly Test Circuit Ideas Without Having To Solder..
Great For Building Your Own Designed Arduino Uno Sheilds..
Features
- Prototype Shield Diy Kits for Arduino UNO R3 Mega 1280 2560 328P
- Great for building your own designed Arduino Uno sheilds.
- Gold plated finish prevents oxidation, High quality Gold finish for easy soldering. All holes are through-plated for strength
- The Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder.
- It's got extra connections for all of the Arduino I/O pins, and it's got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom circuit and Arduino into a single module.
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
Dimensions: 2.80 x 4.60 x 0.50 Inches | Weight: 0.15 Pounds
See On Amazon #3
Screw Terminal Block Breakout Shield Module for Arduino UNO R3
Asin: B08LH5TCM5 | Model: HD024 | PartNumber: HD024 | Ean: 6956601852491
Standard Idc40 Pitch 0.1" Header, You Can Use 40Pin Frc(Flat Ribbon Cable) Connector Cable Connect All Arduino Uno Pins To Peripheral Equipment..
Note: The Item Not Include Arduino Uno Module..
With Power On Led Indicating. Red Reset Button On The Side. With A Icsp Adapter Connect Header. Fr-4 Fiber Glass Pcb, Dual Copper Layers..
Terminal Block Pitch 3.5Mm/0.138", Wire Size Range 26Awg To 16Awg, Strip Length 5Mm, Screw M2 Steel, Pin Header And Cage Copper..
Features
- Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled.
- Terminal block pitch 3.5mm/0.138, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper.
- Standard IDC40 pitch 0.1 header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment.
- With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers.
- NOTE: the item not include Arduino Uno module.
- See more on Amazon...
Brand: HCDC | Manufacturer: Xiken Electronic Technology Co., Ltd.
See On Amazon #4
HiLetgo 2pcs UNO R3 Proto Shield Prototype Expansion Board with SYB-170 Mini Breadboard Based for Arduino UNO R3 ProtoShield
Asin: B00HHYBWPO | Model: 3-01-0053 | PartNumber: 3-01-0053 | Ean: 0797698770000 | UPC: 797698770000
The Protoshield Prototyping Board Comes With Two Leds And Two Pushbutton Circuits That Are Ready To Use, With All Pins And Power Supplies Present.
Components Can Be Soldered Directly On The Board, Or Through The Mini Breadboard Above.The Breadboard Is Connected To The Circuit Board Through A Double-Sided Adhesive.
Used In Conjunction With The Duemilanove Protoshield Prototype Expansion Board, The Circuit Is Used To Build A Prototype.
Syb-170 Mini Breadboard Based For Arduino Compatible With Uno R3.
Features
- 2 Sets of UNO Proto Shield prototype expansion board with SYB-170 mini breadboard
- SYB-170 Mini Breadboard Based for arduino Compatible with UNO R3
- The ProtoShield Prototyping Board comes with two LEDs and two pushbutton circuits that are ready to use, with all pins and power supplies present
- Used in conjunction with the Duemilanove ProtoShield prototype expansion board, the circuit is used to build a prototype
- Components can be soldered directly on the board, or through the mini breadboard above.The breadboard is connected to the circuit board through a double-sided adhesive
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.98 x 4.49 x 3.82 inches | Weight: 0.05 pounds
See On Amazon #5
KeeYees 2pcs ESP32 Breakout Board Shield GPIO 1 into 2 for 30PIN ESP32 Development Board
Asin: B0B9MY5LY7
2 Type Connections: Pin Header & Screw Terminal. Just Select Them According To Your Purpose..
Updated Version: Compared With The Previous Version, The Board Of This Version Has Been Soldered Completely. No Need To Solder Parts By Yourself, Which Is Very Convenient To Use..
Double-Layer Pcb: The Expansion Board Is A Double-Layer Board. One Pin Is Wired On Both Sides. Therefore, The Circuit Is Stable And Highly Reliable, And There Will Be No Poor Circuit Contact And Unstable Signal Transmission..
Gpio 1 Into 2: This Breakout Board Can Expand One Gpio Pin Of Esp32 Development Board To Two, Which Is Convenient For Users To Reuse All Pins In Smart Home Projects. Nice Breadboard Alternative..
Features
- IMPORTANT: Only compatible with 30 pins ESP32 development board, ref asin: B0B9G74NNM. Not applicable to other versions.
- GPIO 1 INTO 2: This breakout board can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative.
- 2 TYPE CONNECTIONS: Pin Header & Screw Terminal. Just select them according to your purpose.
- DOUBLE-LAYER PCB: The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
- UPDATED VERSION: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
Dimensions: 0.39 x 2.60 x 2.48 Inches
Warranty: 1 year
See On Amazon #6
QLOUNI 40pcs PCB Proto Boards SMD to DIP Adapter Plate Converter TQFP (32 44 48 64 84 100) SOP SSOP TSSOP 8 10 14 16 20 23 24 28
Asin: B07CJ96ZPW | Model: QLOUNI | PartNumber: QLOUNI | Ean: 0750440591155 | UPC: 750440591155
★[Application] Apply To The Commonly Used Ssop16, Tssop16, Msop16 And Other Packages Transferred Into Dip.
★[Warm Tips] Please Carefully Check The Size You Need Before Order If You Use It In Various Project.
★[High Quality]All Pcb Prototype Boards Is Dual Sided And The Material Up To Fr-4 Class, So It Is Strong, And The Solder Of Parts Will Firm.
★[Double Side Pcb Board Kit] One Side For Pin Pitch Size 0.65Mm/0.03", Other Is 1.27Mm/0.05", The Detail Size Please Pay Attention To The Picture.
Features
- [SMD to Dip PCB Board] Type: SOP SSOP TSSOP 8 10 14 16 20 23 24 28 & TQFP(32 44 48 64 84 100)
- [Double Side PCB board kit] One side for pin pitch size 0.65mm/0.03, other is 1.27mm/0.05, the detail size please pay attention to the picture
- [Application] Apply to the commonly used SSOP16, TSSOP16, MSOP16 and other packages transferred into DIP
- [High quality]All PCB prototype boards is dual sided and the material up to FR-4 class, so it is strong, and the solder of parts will firm
- [Warm tips] Please carefully check the size you need before order if you use it in various project
- See more on Amazon...
Brand: QLOUNI | Manufacturer: QLOUNI
See On Amazon #7
ANMBEST Mega 2560 R3 Prototype Screw Terminal Block Shield Board Pre-soldered Kit, Breakout Module for Arduino UNO
Asin: B0BY8SHQZS | Model: ANMBEST_MD505 | PartNumber: ANMBEST_MD505
All Signal Ports Are Clearly Named And Labeled On Both Sides Of The Board For Quick Wiring..
Female Header Socket: Pitch: 0.1"/2.54Mm; Pin Length: 15Mm / 0.59"; 1Pcs Single Row 10Pin; 5Pcs Single Row 8Pin; 1Pcs Dual Row 18Pin..
Terminal Block: Pitch 3.5Mm / 0.138" Mini Terminal Blocks, Total 85 Pins(3Pole X25pcs, 2Pole X5pcs ). Wire Range 26~16Awg, Strip Length 5Mm..
No Welding Required: The Mega 2560 Proto Screw Shield Is Pre-Soldered. It Can Be Used For Prototyping And Experimenting With Electronic Projects To Connect External Wires Without The Need For Soldering..
Features
- The Mega 2560 Prototype Screw Terminal Block Shield Board is an accessory for the Arduino Mega 2560 microcontroller that provides a convenient way to connect external wires using screw terminals.
- No Welding Required: The Mega 2560 Proto Screw Shield is Pre-soldered. It can be used for prototyping and experimenting with electronic projects to connect external wires without the need for soldering.
- All signal ports are clearly named and labeled on both sides of the board for quick wiring.
- Terminal Block: Pitch 3.5mm / 0.138 mini terminal blocks, total 85 pins(3pole x25pcs, 2pole x5pcs ). Wire range 26~16AWG, strip length 5mm.
- Female Header Socket: Pitch: 0.1/2.54mm; Pin length: 15mm / 0.59; 1PCS Single row 10pin; 5PCS single row 8pin; 1PCS dual row 18pin.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
Dimensions: 0.10 x 3.50 x 1.50 inches
See On Amazon #8
ElectroCookie Uno Terminal Block Shield Kit, Compatible for Arduino Uno R3, Push-in Simple Spring Connector Expansion PCB Module
Asin: B092LQXSLG
Offered With 20Pin Ribbon Cable(2Feet, 60Cm), Standoffs, Mounting Screws, And Screw Driver.
Note: The Package Does Not Include Arduino Uno.
The Terminal Board Is Soldered, Assembled And Ready-To-Use.
Simple Push-In Type Terminal Block Breakout Shield For Arduino Uno.
Features
- Useful for Arduino Uno Installation Projects Using GPIO pins
- Simple Push-in Type Terminal Block Breakout Shield for Arduino Uno
- Offered with 20pin Ribbon Cable(2feet, 60cm), Standoffs, Mounting Screws, and Screw Driver
- The terminal board is soldered, assembled and ready-to-use
- NOTE: The package does not include Arduino Uno
- See more on Amazon...
Brand: ElectroCookie | Manufacturer: ELECTROCOOKIE
See On Amazon #9
AITRIP 5PCS ESP32 GPIO Breakout Board 30Pins ESP32 Development Board Type-C USB and Micro USB CH340C WiFi+Bluetooth Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board
Asin: B0B829R5WS | Ean: 0701715523470 | UPC: 701715523470
Integrated 520-Kbsram, 448-Kbrom16-Kbsraminrtc.
You Will Get 5Pcs Esp32-Devkitc-32 Esp-Wroom-32 Expansion Board.
Usb Driver Chip: Ch340c, With Good System Compatibility, Higher Download Speed, And More Stability..
Esp32 Development Board Support Lua Program, Easy To Develop, Support Lwip Protocol, Freertos, Three Modes : Ap, Sta And Ap + Sta..
Features
- Note: AITRIP Expansion Board ONLY can fit 30pins ESP32. ref asin: B08D5ZD528 ; B07WCG1PLV;B0B19KRPRC ; B0B19DXFHX
- ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
- Integrated 520-kBSRAM, 448-kBROM16-kBSRAMinRTC
- USB driver chip: CH340C, with good system compatibility, higher download speed, and more stability.
- you will get 5PCS ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #10
Electronics-Salon 10x Prototype PCB for Arduino UNO R3 Shield Board DIY. by CZH-LABS
Asin: B01J1KM3RM | Model: 43227-2037 | PartNumber: 43227-2037 | Ean: 6921407379640, 0793631324828 | UPC: 793631324828
Pcb Dimension: 68.58Mm X 53.34Mm / 2.7" X 2.1".
Material: High Quality Fr-4 Glass Fiber Pcb..
Pcb Thickness: 1.6Mm.
Quantity: A Lot Of 10 Pieces..
Features
- Prototype PCB for Arduino UNO R3 Shield Board DIY.
- Quantity: a lot of 10 pieces.
- PCB Dimension: 68.58mm x 53.34mm / 2.7 x 2.1
- PCB Thickness: 1.6mm
- Material: high quality FR-4 glass fiber PCB.
- See more on Amazon...
Brand: CZH-LABS | Manufacturer: Electronics-Salon
Dimensions: 0.60 x 3.00 x 2.50 inches | Weight: 0.26 pounds
See On Amazon #11
ElectroCookie Proto Shield Kit Compatible with Arduino Uno R3, Expansion Prototyping PCB Board (3 Types, 9 Pack)
Asin: B08MTFY2PR | Model: ECPB_Uno_Shield_Multi | PartNumber: ECPB_Uno_Shield_Multi
9 Pack, 3 Layout Types (3 Red, 3 Blue, 3 Green).
All Holes Are Through-Plated For Mounting Strength.
Pcb Dimensions: 2.70"X2.09" (68.6Mm X 53.3Mm), Pcb Thickness: 1.6Mm.
Various Proto-Shield Layouts For The Circuit Design You Want To Build.
Features
- Useful in creating your own DIY electronic projects
- Various proto-shield layouts for the circuit design you want to build
- 9 Pack, 3 layout types (3 Red, 3 Blue, 3 Green)
- PCB Dimensions: 2.70x2.09 (68.6mm x 53.3mm), PCB Thickness: 1.6mm
- All holes are through-plated for mounting strength
- See more on Amazon...
Brand: ElectroCookie | Manufacturer: ElectroCookie
Weight: 0.25 pounds
Warranty: 1 Year Warranty and Free exchange of defective products
See On Amazon #12
naughtystarts for ESP32 Breakout Board 3.5mm / 0.14" Terminal GPIO Expansion Board for 0.9" / 1.0" Size ESP32 Module ESP-WROOM-32 ESP32-DevKitC (Pack of 2pcs)
Asin: B0BYS6THLF
Shrapnel Screw Terminal: 3.5Mm / 0.14" Pitch.
It's Fully Assembled, No Soldering Required..
It's Suitable For 18~24Awg Cable Connection, Easy To Use..
The Dual-Row Input Bus Allows You To Plug In 0.9 "Or 1.0" Esp32 Modules For Maximum Compatibility..
Features
- for ESP32 GPIO expansion board 38pin with terminal.
- The dual-row input bus allows you to plug in 0.9 or 1.0 ESP32 modules for maximum compatibility.
- Shrapnel Screw Terminal: 3.5mm / 0.14 Pitch
- It's suitable for 18~24AWG cable connection, easy to use.
- It's fully assembled, no soldering required.
- See more on Amazon...
Brand: naughtystarts | Manufacturer: naughtystarts
Dimensions: 0.59 x 3.94 x 3.15 Inches
Warranty: 3 Years
See On Amazon #13
KEYESTUDIO Proto Screw Shield for Arduino R3, Proto Shield Terminal Prototype Expansion Board for Arduino Un0 R3
Asin: B07B2H97CX | Model: KS0252 | PartNumber: KS0252 | Ean: 0600346571808 | UPC: 600346571808
High Quality Terminal Blocks, Reliable, Convenient And Durable; Combined With Proto Shield, The Middle Of Screw Shield Can Be Used As A Proto Shield.
Middle Section Can Place Small Breadboard, Convenient For Experiment Extension.
Prototype Expansion Area Has Double-Sided Pcb Overhole Connections, And The Front And Back Sides Can Be Soldered With Components.
Provide Terminal Block Io For Arduino, Convenient For Terminal Connection; The Back Io Has Patch Pad, Convenient To Connect The Line.
Features
- It is an aggregation of the Screw shields and Proto prototype shield for arduino
- Provide terminal block IO for Arduino, convenient for terminal connection; The back IO has patch pad, convenient to connect the line
- High quality terminal blocks, reliable, convenient and durable; Combined with Proto Shield, the middle of screw shield can be used as a proto shield
- Prototype expansion area has double-sided PCB overhole connections, and the front and back sides can be soldered with components
- Middle section can place small breadboard, convenient for experiment extension
- See more on Amazon...
Brand: KEYESTUDIO | Manufacturer: keyes
Dimensions: 0.59 x 2.95 x 2.48 inches | Weight: 0.04 pounds
See On Amazon #14
Electronics-Salon Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA-2560 R3.
Asin: B00UT13YXA | Ean: 6921407379848, 6921407352414
Pads Grid / Pitch 2.54Mm / 0.1", Hole Diameter 0.8Mm. Terminal Block Pitch 3.5Mm / 0.138", Hole Diameter 1.2Mm..
Pitch 3.5Mm / 0.138" Mini Terminal Blocks, Total 84 Pins(3Pole X24pcs, 2Pole X6pcs )..
Fr-4 Fiber Glass Pcb, Dual Copper Layers, Size 120Mm X 78Mm..
Features
- Prototype Screw/Terminal Block Shield Board Kit For Arduino MEGA-2560 R3.
- FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm.
- Pads grid / pitch 2.54mm / 0.1, hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138, hole diameter 1.2mm.
- Pitch 3.5mm / 0.138 mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ).
- See more on Amazon...
Brand: Electronics-Salon | Manufacturer: Electronics-Salon
Dimensions: 3.07 x 4.72 x 4.72 Inches | Weight: 0.11 pounds
See On Amazon #15
Electronics-Salon Arduino Screw Terminal Block Breakout Module, for Arduino UNO R3.
Asin: B07HF2DD7T | Model: MD-D1229-1 | PartNumber: MD-D1229-1 | Ean: 6954525581176
Standard Idc40 Pitch 0.1" Header, You Can Use 40Pin Frc(Flat Ribbon Cable) Connector Cable Connect All Arduino Uno Pins To Peripheral Equipment..
Note: The Item Not Include Arduino Uno Module.
With Power On Led Indicating. Red Reset Button On The Side. With A Icsp Adapter Connect Header. Fr-4 Fiber Glass Pcb, Dual Copper Layers..
Terminal Block Pitch 3.5Mm/0.138", Wire Size Range 26Awg To 16Awg, Strip Length 5Mm, Screw M2 Steel, Pin Header And Cage Copper..
Features
- Terminal Block Breakout Module - for Arduino UNO R3. the item has been soldered and assembled.
- Terminal block pitch 3.5mm/0.138, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper.
- Standard IDC40 pitch 0.1 header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment.
- With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers.
- NOTE: the item not include Arduino Uno module
- See more on Amazon...
Brand: Electronics-Salon | Manufacturer: Electronics-Salon
See On Amazon #16
Gikfun Screw Shield Expansion Board for Arduino UNO R3 EK7007
Asin: B014SGTP20 | Model: LYSB014SGTP20-ELECTRNCS | PartNumber: LYSB014SGTP20-ELECTRNCS | Ean: 0703510988386 | UPC: 703510988386
Direct Plug Puzzle Board, No Soldering Needed.
It Offers A Reliable And Convenient Solution For Connecting More Arduino Components To The Arduino Controller.
Features
- It can be plugged directly into the Arduino controller. Newest Vision UNO R3 compatible.
- It offers a reliable and convenient solution for connecting more Arduino components to the Arduino controller
- Direct plug puzzle board, NO soldering needed
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
Dimensions: 2.10 x 3.10 x 0.40 Inches
See On Amazon #17
KeeYees ESP8266 Breakout Board GPIO 1 into 2 for ESP8266 ESP-12E Development Board (2PCS)
Asin: B08D3FF6WY | Ean: 0744678331898 | UPC: 744678331898
√【2 Type Connections】: Two Connection Methods: Pin Header Connector & Screw Terminal. Just Select Them According To Your Purpose..
√【Updated Version】: Compared With The Previous Version, The Board Of This Version Has Been Soldered Completely. No Need To Solder Parts By Yourself, Which Is Very Convenient To Use..
√【Double-Layer Pcb】: The Expansion Board Is A Double-Layer Board. One Pin Is Wired On Both Sides. Therefore, The Circuit Is Stable And Highly Reliable, And There Will Be No Poor Circuit Contact And Unstable Signal Transmission..
√【Gpio 1 Into 2】: This Expansion Board Can Expand One Gpio Pin Of Development Board To Two, Which Is Convenient For Users To Reuse Pins For Large-Scale Smart Home Projects..
Features
- For ESP8266 ESP-12E : Specially designed by KeeYees technical team. It is fully compatible with ESP8266 ESP-12E.
- GPIO 1 into 2 : This expansion board can expand one GPIO pin of Development Board to two, which is convenient for users to reuse pins for large-scale smart home projects.
- 2 Type Connections : Two connection methods: Pin Header Connector & Screw Terminal. Just select them according to your purpose.
- Double-Layer PCB : The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
- Updated Version : Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
Dimensions: 0.39 x 2.50 x 2.48 Inches
See On Amazon #18
GeeekPi Screw Terminal Block Breakout Board HAT with Reset Button and LED Indicator, GPIO Expansion Board Breakout Module for Arduino MEGA 2560 R3
Asin: B0BPH738P2
Screw M2 Steel;Fr-4 Fiber Glass Pcb, Dual Copper Layers..
Technology Support:Https://Wiki.52Pi.Com/Index.Php?Title=Ep-0166.
Package Includes:1 X Terminal Hat For Arduino Mega 2560 R3(Note:Arduino Mega 2560 Development Board Is Not Included), 8 X M2.5 Screw, 4 X Long Copper Pillar, 4 X Short Copper Pillar, 1 X Acrylic Protection Panel.
Reset Button And Led Indicator..
Terminal Block Pitch 3.5Mm/0.138";Wire Size Range 26Awg To 16Awg, Strip Length 5Mm.
Features
- This is a terminal hat for Arduino mega 2560 R3.
- Terminal block pitch 3.5mm/0.138;Wire size range 26AWG to 16AWG, strip length 5mm
- Screw M2 steel;FR-4 fiber glass PCB, dual copper layers.
- Reset button and LED indicator.
- Technology support:https://wiki.52pi.com/index.php?title=EP-0166
- Package includes:1 x Terminal hat for Arduino Mega 2560 R3(Note:Arduino Mega 2560 development board is Not Included), 8 x M2.5 screw, 4 x Long copper pillar, 4 x short copper pillar, 1 x Acrylic protection panel
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Dimensions: 3.94 x 3.15 x 0.79 Inches | Weight: 0.29 Pounds
Warranty: NO
See On Amazon #19
ubld.it - MIDI 2.0 Breakout Board MV (Multi Voltage) 3.5mm TRRS
Asin: B0BYMC926Z | Model: MIDI 2.0 BoB MV | PartNumber: MIDI 2.0 BoB MV
5V Or 3.3V Operation 6N137.
This Is A Fully Assemble Pcb.
Optically Isolated Midi Input (4 Pin Header).
Midi In And Midi Out (3.5Mm Trs Connector).
Features
- Arduino Compatible (example sketches available)
- MIDI IN and MIDI OUT (3.5mm TRS Connector)
- 5V or 3.3V operation 6n137
- Optically Isolated MIDI Input (4 Pin Header)
- This is a fully assemble PCB
- See more on Amazon...
Brand: ubld.it | Manufacturer: ubld.it
Warranty: Limited manufacturer warranty.
See On Amazon #20
AITRIP 3PCS A4988 V3 Engraver Drive Shield 3D Printer CNC Drive Expansion Boards for Arduino 3D Printer CNC
Asin: B08XZ5T1JB | Ean: 0701715464902 | UPC: 701715464902
Stepper Motor Wiring As Follows: 2A, 2B Is A Group (Red, Green), 1A, 1B Is A Group (Blue, Yellow). If Want To Change Direction, Can Be Change The Position Of One Group , For Example 2A, 2B Mutually Exchanged..
Package Included : 3Pcs 3D Printer Cnc Expansion Board A4988 Driver Board.
Each Road Stepper Motors Only Need Two Io Ports. In Other Words, Six Io Ports Can Be Well Managed Three Stepper Motors. Very Convenient To Use..
Our Expansion Board As A Driver Expansion Board, Can Be Used For Engraving Machines, 3D Printers..
Features
- Uses removable A4988 compatible stepper drivers.
- our expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
- Stepper motor wiring as follows: 2A, 2B is a group (red, green), 1A, 1B is a group (blue, yellow). If want to change direction, can be change the position of one group , for example 2A, 2B mutually exchanged.
- Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
- Package Included : 3pcs 3D Printer CNC Expansion Board A4988 Driver Board
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon
Looking For Something Else?
Search