Draw Stops Size AM fits Diamond Archery and Bowtech Limb Stops
Asin: B07Y2DVT7W
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features
- Lucky Stops allows you to Easily Dial in Proper Draw Length, Valley Length, Let-off, and Wall feel. A great fitting bow will always give you more accuracy.
- See more on Amazon...
Brand: Lucky Stops | Manufacturer: Dorn Design, LLC
Weight: 0.03 Pounds
See On Amazon Similar To Draw Stops Size AM fits
#1
ATE Original TYP 200 Racing Quality DOT 4 Brake Fluid, 1 Liter Can
Asin: B003VXRPL0 | Model: 706202 | PartNumber: 706202 | Ean: 0653345320236, 4006633108256, 0805890131519, 0826732430041 | UPC: 805890131519, 826732430041, 653345320236
Excellent Corrosion Protection Due To Selected Additives.
Makes Brake Fluid Changing Intervals Of Up To 3 Years Possible.
High Safety Tolerance Against Steam Bubbles.
Non-Foaming When Filling And Bleeding The Brake System.
Features
- Minimal decrease of boiling point due to excellent water locking properties
- Non-foaming when filling and bleeding the brake system
- Excellent corrosion protection due to selected additives
- High safety tolerance against steam bubbles
- Makes brake fluid changing intervals of up to 3 years possible
- See more on Amazon...
Brand: ATE | Manufacturer: ATE
Dimensions: 6.27 x 6.30 x 4.52 inches | Weight: 0.61 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #2
Nilight TL-20 2PCS Submersible Kit Low Profile Rectangular LED Stop Tail Turn Signal Side Marker Light on 12V RV Pickup Trucks Marine Boats Trailers, 2 Years Warranty,Red, White, Black
Asin: B07X6MD52J | Model: TL-20 | PartNumber: TL-20 | Ean: 0812227032364 | UPC: 812227032364
Entirely Submersible: The Inside Leds And Circuit Board Is Fully Waterproof Sealed To Work Under Water Perfectly Without Electric Short Risk. The Light Housing Also Features Water Drainage For Added Protection.
Easy Installation: For Light Mounting: Lamp With License Plate Light On The Left Side, The Other On The Right Side. For Wiring Routing: Please See Picture 5 For Instruction. For Wiring Connection: Just Color To Color, White To The Ground (Vehicle Frame). For Hardware You Might Need To Use, Please See Pic 8 For Instruction.
Fit Type: Universal. 2 Years Warranty Honored By Nilight..
All-In-One Kit: Comes With Everything For Your Straightforward Installation Of The Light, Include Lights, License Plate Bracket, 25Ft Length Trailer Wiring Harness And The Different Types Of Stainless Steel Mounting Hardware.
Excellent Brightness: Left Lamp Has 27 Diodes Including 9 Diodes For License Plate Light, Right Lamp Has 12 Diodes. Quality Leds Draw Less Amperage But Outputs Optimal Brightness, Improving Great Visibility And Extend Longer Lifetime Than The Incandescent Lamp. Dot Compliance To Ensure Your 100% Safety.
Features
- Multi-functions: Combined functions of tail, brake/turn signals, side marker, license plate light. Perfect for 12V DC vehicles with a maximum width of 80 inches. Such as most of trailers, boats, trucks, RV, Marine, Pickups, camper, tractors etc
- Excellent Brightness: Left lamp has 27 diodes including 9 diodes for license plate light, right lamp has 12 diodes. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. DOT Compliance to ensure your 100% safety
- Entirely Submersible: The inside LEDs and circuit board is fully waterproof sealed to work under water perfectly without electric short risk. The light housing also features water drainage for added protection
- All-in-one Kit: Comes with everything for your straightforward installation of the light, include lights, license plate bracket, 25ft length trailer wiring harness and the different types of stainless steel mounting hardware
- Easy Installation: For light mounting: Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Picture 5 for instruction. For wiring connection: Just color to color, white to the ground (vehicle frame). For hardware you might need to use, please see Pic 8 for instruction
- Fit Type: Universal. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #3
iBrightstar IP68 Waterproof Square LED Trailer Lights Kit - Utility Trailer Accessories with Brake Stop Tail Running License Plate Light for 12V Camper Truck Boat Snowmobile Marine Under 80", DOT
Asin: B07FTJ59L1 | Model: 8542089223 | PartNumber: 8542089223 | Ean: 0710825806090 | UPC: 710825806090
Excellent Waterproof/Submersible Lights For Trailer. Sonic Welding Whole Sealing Technology Ensures Sealing Solidity Of The Led Tail Lights. Further More, Every Possible Gap Is Sealed Well With Glue, Such As Wires Entrance Holes And Edge Of The Lens. 18 Gauge Pure Copper Wires Ensure Trailer Lights Led Do Good Job Underwater..
Buy With Confidence, Any Other Problem Please Feel Free To Contact Us, We Are Always Here To Satisfy Of You..
Easy To Install The Submersible Trailer Lights. 2 Optional Mounting Ways, You Can Mount On The Back Or The Side Of The Trailer. Please Make Sure Connect Wiring And No Electronic Short Before Marine/Underwater. Wiring Diagram Ships With Trailer Lights, You Can Also Find It On Detail Page..
Left And Right Led Trailer Tail Lights Have 6 Functions In Common: Stop/Turn/Tail/Rear Reflector/Side Reflector/Side Marker Light. 1 Additional Function For Left Trailer Light: License Plate Light. The Trailer Led Lights Are Suitable For Under 80 Inch Width Towing Vehicle, Like Boat, Trailer, Truck, Snowmobile Etc..
Features
- Application: Universal for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, camper, special vehicle etc. Super bright LED lights provide maximum visibility and safety. Fully operable in inclement weather, these heavy duty trailer lights are tough and durable for the long term.
- Left and Right LED trailer tail Lights have 6 functions in common: Stop/Turn/Tail/Rear reflector/side reflector/side marker light. 1 additional function for left trailer light: license plate light. The trailer led lights are suitable for under 80 Inch width towing vehicle, like boat, trailer, truck, snowmobile etc.
- Excellent waterproof/Submersible lights for trailer. Sonic Welding Whole Sealing Technology ensures sealing solidity of the LED tail lights. Further more, every possible gap is sealed well with glue, such as wires entrance holes and edge of the lens. 18 gauge pure copper wires ensure trailer lights LED do good job underwater.
- Easy to install the submersible trailer lights. 2 optional mounting ways, you can mount on the back or the side of the trailer. Please make sure connect wiring and no electronic short before marine/underwater. Wiring diagram ships with trailer lights, you can also find it on detail page.
- Buy with confidence, any other problem please feel free to contact us, we are always here to satisfy of you.
- See more on Amazon...
Brand: iBrightstar | Manufacturer: iBrightstar
See On Amazon #4
Nilight 2PCS 16Inch 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty
Asin: B07V7BF18S | Model: TL-10 | PartNumber: TL-10 | Ean: 0767912577203 | UPC: 767912577203
Easy Wire Connection For Wire Connection White Wire For Ground Black Wire For Low Brightness Tail Light And Red Wire For High Brightness Brake Light.
Wide Application Can Be Perfectly Used On Most 12V Heavy Duty Trucks, Semi Trailers, Cargo Trailers, Boat Trailers, Travel Trailers, Horse Trailers, Rv Camper Work Vehicles, Etc. Package Include 2Pcs Trailer Marker Id Bar With 2 Hardware Pack. 2 Years Warranty Honored By Nilight..
Light Bar Mounting To Flush-Mounting The Light One Option Is To Drill A Center Hole Or Use The Existing Hole To Go Through The Back Wire Lead And Then Fix The Two Ends By Drilling In The Two Screws Provided The Other Option Is To Add Some Washer When Fixing The Two Ends Or Use A Bracket To Mount The Light To Avoid Drilling Holes For The Back Wire Lead.
Highly Sealed & Durable The Front Polycarbonate Lens Is Sonically Welded To The Housing And The Back Wire Lead Is Add On Glue To Make Sure The Light Is Completely Sealed Waterproof Enough To Withstand All Weather Abuse.
Features
- Multi-functions Each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light
- Highly Sealed & durable The front Polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse
- Easy Wire Connection For wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light
- Light Bar Mounting To flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead
- Wide Application Can be perfectly used on most 12V heavy duty trucks, semi trailers, cargo trailers, boat trailers, travel trailers, horse trailers, RV camper work vehicles, etc. Package Include 2PCS trailer marker ID bar with 2 hardware pack. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Weight: 0.57 Pounds
Warranty: 2 Years Warranty
See On Amazon #5
Nilight 2PCS Square LED Trailer Light Kit Low Profile Submersible IP68 LED Stop Turn Tail Side Marker License Light for 12V Utility Trailer Boat Camper RV Trucks Marine Snowmobile,2 Years Warranty
Asin: B08C7XN4P8 | Model: TL-22 | PartNumber: TL-22 | Ean: 0781621092956 | UPC: 781621092956
Ip68 Entirely Submersible: Inside Leds And Circuit Board Is Fully Waterproof Sealed To Work Under Water Perfectly Without Electric Short Risk. The Light Housing Also Features Water Drainage For Added Protection.
Easy Installation: Light Mounting: Stud-Mounted On The Surface Design, Light With License Light On The Left, The Other On Right. Wiring Connection: Color Coded Wire, Just Color To Color White To The Ground (Vehicle Frame) And Then Follow Picture 6 For Wire Routing Instruction. 2 Years Warranty Honored By Nilight..
All-In-One Kit: Comes With Everything For Your Straightforward Installation, Include Square Lights, Amber Clearance Light, License Plate Bracket, 25Ft Length Trailer Wiring Harness, The Reflector And The Different Types Of Stainless Steel Mounting Hardware. (For Hardware Instruction, Please Picture 8).
Brighter And Safe: Employ Quality Led To Draw Less Amperage But Outputs Optimal Brightness, Improving Great Visibility And Extend Longer Lifetime Than The Incandescent Lamp. 100% Dot Compliance To Ensure Your Safety.
Features
- 7 Full Functions: Combined functions of stop, turn tail light, side marker, side reflector, rear reflector, license plate light. Perfect for 12V DC vehicles with max width of 80 inches. Fit most trailers, boats, trucks, RV, Marine, Pickups, camper, tractors, etc. bus, lorry, van, caravan, snowmobile utility trailers
- Brighter and Safe: Employ quality led to draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. 100% DOT Compliance to ensure your safety
- IP68 Entirely Submersible: Inside LEDs and circuit board is fully waterproof sealed to work under water perfectly without electric short risk. The light housing also features water drainage for added protection
- All-in-one Kit: Comes with everything for your straightforward installation, include square lights, amber clearance light, license plate bracket, 25ft length trailer wiring harness, the reflector and the different types of stainless steel mounting hardware. (For hardware instruction, please picture 8)
- Easy Installation: Light mounting: stud-mounted on the surface design, light with license light on the left, the other on right. Wiring connection: color coded wire, just color to color white to the ground (vehicle frame) and then follow picture 6 for wire routing instruction. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #6
PHINLION 3157 LED Bulb Amber Yellow Super Bright 3156 3056 3457 4057 4157 Turn Signal Bulbs for Front Rear Blinker Parking DRL Side Marker Lights, Pack of 2
Asin: B07D55BMHJ | Model: 3157-3014-72SMD-Y | PartNumber: 3157-3014-72SMD-Y | Ean: 0751637664904 | UPC: 751637664904
Application: Front/Rear Turn Signal Directional Indicator Light, Daytime Running Light(Drl), Backup Reverse Light, Side Marker Light, Parking Light, Cornering Light, Brake Stop Tail Light, Etc..
One Year Warranty. Please Check The Owner's Manual, Original Bulb Size Or Amazon Fitment Note On Product Page Where It Says "Amazonconfirmedfit | Make Sure This Fits" To Confirm Which Position These Bulbs Would Fit.
For Turn Signal Light Upgrade, 50W 6Ohm Load Resistor Might Be Required To Avoid Hyper Flashing As Led Bulbs Draw Less Power Than Stock Halogen Lamps.
Led Bulb Cross Reference: T25 3156 3157 3056 3456 4156 3155 3047 3057 3357 3457 3757 4057 4114 4157 P27/7W 3157A 3157K 3157Ak 3157St 3157Na 3157Nak 3157Nall 3157Kx 3157Ll 3047Ll 3047K 3057A 3057K 3057Kx 3057St 3057Ll 3057All 3155Ll 3357A 3357Ll 3357K 3357All 3457A 3457K 3457Na 3457Ak 3457Nak 3457All 3757A 3757Ak 3757All 4057K 4057Ll 4114K 4114Ll 4157Ll 4157K 4157Na 4157Nak 5702A 5702Ak Etc..
Features: Non-Polarity Design, Compatible For Both Ck/Srck And Standard 3157 Socket. Built In Intelligent Constant Current Ic, 6063 Aluminum For Excellent Heat Dissipation And Longer Lifespan.
Features
- (Pack of 2) Each 3157 amber LED bulb is equipped with 72 pcs high power & high performance 3014 SMD LED chips, 360 degree illumination light output; Voltage: 12V-24V
- Features: non-polarity design, compatible for both CK/SRCK and standard 3157 socket. Built in intelligent constant current IC, 6063 aluminum for excellent heat dissipation and longer lifespan
- Application: front/rear turn signal directional Indicator light, daytime running light(DRL), backup reverse light, side marker light, parking light, cornering light, brake stop tail light, etc.
- LED bulb cross reference: T25 3156 3157 3056 3456 4156 3155 3047 3057 3357 3457 3757 4057 4114 4157 p27/7w 3157A 3157K 3157AK 3157ST 3157NA 3157NAK 3157NALL 3157KX 3157LL 3047LL 3047K 3057A 3057K 3057KX 3057ST 3057LL 3057ALL 3155LL 3357A 3357LL 3357K 3357ALL 3457A 3457K 3457NA 3457AK 3457NAK 3457ALL 3757A 3757AK 3757ALL 4057K 4057LL 4114K 4114LL 4157LL 4157K 4157NA 4157NAK 5702A 5702AK etc.
- One year Warranty. Please check the owner's manual, original bulb size or Amazon fitment note on product page where it says amazonconfirmedFit | Make sure this fits to confirm which position these bulbs would fit
- For turn signal light upgrade, 50W 6ohm load resistor might be required to avoid hyper flashing as LED bulbs draw less power than stock halogen lamps
- See more on Amazon...
Brand: PHINLION | Manufacturer: Phinlion
Dimensions: 0.71 x 1.97 x 0.79 inches
See On Amazon #7
Frienda 6 Pieces Waterproof Side Mirror Covers Auto Rearview Protection Cover Exterior Rear View Accessories Car Mirror Accessories with Drawstrings for Car Vehicle Winter
Asin: B09CGSNVSR
Fit Most Vehicles: The Mirror Cover Is About About 15.7 X 11.8 Inches, The Universal Large Size Is Designed To Fit Most Vehicles, Such As Suvs, Minivans And Even Some Trucks.
Wide Applications: These Exterior Rear View Accessories Are Suitable For The Rearview Mirrors Of Cars, Suvs, Trucks, Taxis, Rvs, Buses And More On Cold Days Or Other Bad Weather; Moreover, They Can Also Be Applied In Normal Days, Playing The Role Of Protection And Scratch Prevention.
Protective Function: These Car Side Mirror Covers Are Suitable For Covering The Rear View Mirrors Of Your Car, To Separate Water And Dust From The Rear View Mirrors; They Can Protect The Rear View Mirrors Of Your Car In Wind, Rain And Snowstorm, And Save Your Cleaning Time After Bad Weather.
Easy To Install And Store: No Tool Required For Installation, Just 3 Easy Steps, Loosen The Drawstring, Insert The Side Mirror On The Cover, And Then Tighten The Drawstring Firmly; Foldable, Take Seconds To Remove And Store The Auto Rearview Protection Cover Anywhere, Convenient For Using.
Features
- Package Content: in this package, you will receive 6 pieces side view mirror covers, practical tools to protect side mirrors from snow, ice and frost, making your life more convenient
- Easy to Install and Store: no tool required for installation, just 3 easy steps, loosen the drawstring, insert the side mirror on the cover, and then tighten the drawstring firmly; Foldable, take seconds to remove and store the auto rearview protection cover anywhere, convenient for using
- Fit Most Vehicles: the mirror cover is about about 15.7 x 11.8 inches, the universal large size is designed to fit most vehicles, such as SUVs, minivans and even some trucks
- Protective Function: these car side mirror covers are suitable for covering the rear view mirrors of your car, to separate water and dust from the rear view mirrors; They can protect the rear view mirrors of your car in wind, rain and snowstorm, and save your cleaning time after bad weather
- Wide Applications: these exterior rear view accessories are suitable for the rearview mirrors of cars, SUVs, trucks, taxis, RVs, buses and more on cold days or other bad weather; Moreover, they can also be applied in normal days, playing the role of protection and scratch prevention
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
See On Amazon #8
Nilight 20 Inch 126W Spot Flood Combo LED Light Bars Off-Road Light Mounting Bracket Horizontal Bar Tube Clamp with Off Road Wiring Harness, 2 Years Warranty, White
Asin: B074CS4NXM | Model: ZH063 | PartNumber: ZH063 | Ean: 0600537014114 | UPC: 600537014114
Sturdy Bracket: Strong Aluminum Alloy, Fix The Light On Tube Firmly; Pre-Drilled Hole, Allows More Lights To Be Added To Vehicle Without Drilling.
Package Include: 1Pc 126W Led Light Bar, 2Pcs Led Light Bar Mounting Bracket Kits And 1Pc Wiring Harness,2 Years Warranty By Nilight.
Rubber Inserts: High-Quality Rubber Inserts Help Dampen Vibrations During Off-Roading And Protect Your Bull Bar From Being Scraped.
Perfect Combo Beam: Excellent Visual Effect, Spot Beam For Long Distance Illumination, Flood Beam For Broad View Area.
Features
- SUPER BRIGHT LIGHT: High quality LED chips, powerful and bright light beam, let you see the forward dark road clearly
- PERFECT COMBO BEAM: Excellent visual effect, spot beam for long distance illumination, flood beam for broad view area
- STURDY BRACKET: Strong aluminum alloy, fix the light on tube firmly; pre-drilled hole, allows more lights to be added to vehicle without drilling
- RUBBER INSERTS: High-quality rubber inserts help dampen vibrations during off-roading and protect your bull bar from being scraped
- PACKAGE INCLUDE: 1PC 126W LED light bar, 2PCS LED light bar mounting bracket kits and 1PC wiring harness,2 Years Warranty by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #9
iJDMTOY 3157 Pre-Wired Harness Sockets As Repair, Replacement, Install LED Bulbs Compatible with Turn Signal Lights, DRL Lamps or Brake/Tail Lights
Asin: B01GP6B9WA | Model: For Repair, Conversion, Custom Retrofit | PartNumber: For Repair, Conversion, Custom Retrofit
Due To The Close Resemblance Of Various Connector, Ensure Compatibility By Comparing The Shape, Checking The Locking Tab Design, And Terminal/Contact/Pin Count With The Images Against Your Application Assembly Prior To Purchase!.
This Pre-Wired System Is Ideal For Repair, Replacement, Or Custom Diy Retrofit/Upgrade, Eliminating Many Tedious Cutting, Soldering Splicing And Rewiring Across Various Applications.
Socket/Adapter Crafted From Heat-Resistant Nylon Plastic, With Good Conduction Copper Wiring Cable Encased In A Silicone Insulation Tube, Designed For Durability And Safety, Making It A Reliable Choice For Your Electrical Needs.
Replace Gm 15306147, Acdelco Ls92, Dorman 645-626, Etc.
Features
- 2 pieces of 3157 pre-wired heavy duty wiring harness with sockets (Compatible Bulbs: 3157 3057 3155 3357 3457 3757 4057 4114 4157 3156 3056 3456 4156)
- Replace GM 15306147, ACDelco LS92, Dorman 645-626, etc
- Due to the close resemblance of various connector, ensure compatibility by comparing the shape, checking the locking tab design, and terminal/contact/pin count with the images against your application assembly prior to purchase!
- Socket/adapter crafted from heat-resistant nylon plastic, with good conduction copper wiring cable encased in a silicone insulation tube, designed for durability and safety, making it a reliable choice for your electrical needs
- This pre-wired system is ideal for repair, replacement, or custom DIY retrofit/upgrade, eliminating many tedious cutting, soldering splicing and rewiring across various applications
- See more on Amazon...
Brand: iJDMTOY | Manufacturer: iJDMTOY Auto Accessories
Weight: 0.13 Pounds
See On Amazon #10
LASFIT 921 912 LED Red Light Bulb, 3rd Brake Tail Lights, Center High Mount Stop Light, 300% Brighter Non-polarity 30,000 Hrs Lifespan, Pack of 2
Asin: B081YJWBR9 | Model: LX000-T15/921-R | PartNumber: LX000-T15/921-R | Ean: 0810038820576 | UPC: 810038820576
【Safe Drivering】 Built-In Mini Fuse And Constant Ic Driver, Which Ensure Lasfit T15 Led Bulb Used At Stable Power Consumption, Making Your Driving Safer..
【Long Lifespan】 Aluminum Material For Efficient Heat Dissipation, 921 Led Red Could Be Used With Lower Temperature, Extend Lifespan To 30,000 Hr. The Bulb Enjoys 1 Year Warranty, If Any Issue Happens, Please Contact Us Via Amazon Message To Get Support..
【Can-Bus Ready】Built-In Canbus System, 921 Led 3Rd Brake Light Could Be Compatible With 98% Vehicles. Fit For Ford F150, Dodge Ram, Chevrolet Silverado, Toyota Tundra, Etc. Not Fit 2019-2022 Ram 1500. Load Resistors Or Flash Relay Will Be Needed When Used To Replace Rear Turn Signal Lights..
【Easy To Install】 Non-Polarity, Plug And Play, 912 Led Bulb Red Can Perfectly Replace Your Original Halogen Light.Fit For 921, 912, T15, 906, 904, 902, 922, W16w. Application For Third Brake Light And High Mount Stop Light Only, Don`T Fit For Brake/Tail Lights And Rear Turn Signal Lights..
Features
- High Bright 921 led bulb red has high power 3030 SMD chips and provides 1400 LM brilliant red lighting. When braking,people will notice us clearly.
- Easy to Install Non-polarity, plug and play, 912 led bulb red can perfectly replace your original halogen light.Fit for 921, 912, T15, 906, 904, 902, 922, W16W. Application for third brake light and high mount stop light only, don`t fit for brake/tail lights and rear turn signal lights.
- Safe Drivering Built-in mini fuse and constant IC driver, which ensure Lasfit T15 led bulb used at stable power consumption, making your driving safer.
- Can-bus Ready Built-in canbus system, 921 led 3rd brake light could be compatible with 98% vehicles. Fit for Ford F150, Dodge Ram, Chevrolet Silverado, Toyota Tundra, etc. Not fit 2019-2022 ram 1500. Load resistors or flash relay will be needed when used to replace rear turn signal lights.
- Long Lifespan Aluminum material for efficient heat dissipation, 921 led red could be used with lower temperature, extend lifespan to 30,000 Hr. The bulb enjoys 1 year warranty, if any issue happens, please contact us via Amazon message to get support.
- See more on Amazon...
Brand: LASFIT | Manufacturer: LASFIT
Warranty: Truly U.S.A. Tech Support Warranty for 1 year from date of purchase
See On Amazon
Looking For Something Else?
Search