Optics Shim/Riser for Doctor/Noblex, Burris Fastfire 1-4, Meopta Meosight IV, Vortex Venom, ADE RD3-006B, RD3-009,RD3-012, RD3-013, RD3-015, Vortex Venom,Vortex Viper,Eotech MRDS,Insight Red dot Sight
Asin: B07Y417KMD
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Also Fits: Eotech Mrds, Sightmark, Meopta. All Trademarks Mentioned Belong To Their Respective Owner, This Optic Shim Is Made By Ade As A Mounting Accessory For The Mentioned Optics.
What It Does? While Zeroing The Red Dot Sight, Some Users Turned The Elevation Screw All The Way To The End That Can No Longer Turn(Screw Maxed-Out), The Location Of The Illuminated Dot Is Still Too High, User Is Unable To Adjust The Dot Low Enough To Zero. Instead Of Returning The "Defective" Red Dot, This Shim Will Rise The Optic To Help User To Move The Illuminated Dot Higher To The Location To Zero. Scope Base Shims Tolerance +/-.005 Taper 1.0 Degree..
Also Fits: Ade Advanced Optics Rd3-006, Rd3-009, Rd3-011, Rd3-012, Rd3-013, Rd3-015. The Center Two Screw Holes Might Be 1 Or 2Mm Off For Some Red Dots, If So, Simply Trim Cut The Hole Bigger. Does Not Fit Trijicon Rmr, Shield, Sig Romeo, Holosun Red Dots.
Fits: Burris Fastfire Ii, Iii, Docter Red Dot Sight & Insight Mrds.
Features
- Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms (such as the 1911). Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.
- Fits: Burris Fastfire II, III, Docter Red Dot Sight & Insight MRDS
- Also Fits: Eotech MRDS, Sightmark, Meopta. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics
- Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots
- What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out), the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance +/-.005 Taper 1.0 degree.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon Similar To Optics Shim Riser for Doctor
#1
Picatinny Riser Mounts, FENTUK 1 Inch High Profile & 1/2 Inch Low Profile 8 Slots Picatinny Rail Riser Mount with See Through Design for Scopes Optics Red Dots - 2 Pack (Include 1" & 0.5" Riser Mount)
Asin: B08LBM4YN8 | Ean: 0759838982803 | UPC: 759838982803
✌【Perfect Fit On Picatinny Rail】Riser Mounting Base Fits On Standard 21Mm Picatinny/ Weaver Rail. Two Locking Thumb Screw Design On Side For Easy And Quick Install Or Remove. ✍ [ Note: Tighten The Screw Of The Low Profile Riser Mount By Allen Wrench]..
✌【Available In 0.5 Inch Low Profile & 1 Inch High Profile】Low Profile - 0.5'' Saddle Height - 8 Slots / 3.34 Inch Length - Weight: 2.8 Oz - With 1 X Allen Wrenchs - 1Pcs; High Profile - 1'' Saddle Height - 8 Slots / 3.34 Inch Length - Weight: 4.12 Oz - 1Pcs. The Combination Of High And Low Allows You To Replace Each Other In Different Scenarios, Perfectly Meeting Your Various Needs!.
✌【See Through Design, Sturdy & Durable】Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty; Made From Premium Aluminum Alloy & High-Strength Steel, With Matte Black Hard Coat Anodized, Lightweight Solid, Safe Durable..
✌【With 8 Slots Long Picatinny Rails】Top 8-Slot 3.34" Long Picatinny Rails Design,Allowing You Add On Any Standard Picatinny Or Weaver Accessories, Ideal For Mounting Scopes, Optics And Red Dot Sights, Flashlight Or Other Accessories..
Features
- FENTUK 2 Pack Picatinny Riser Mounts FENTUK Riser Rail Mounts Include 1PCS 1'' High Profile + 1PCS 1/2'' Low Profile in one package. It's designed to lift your optics providing a clear view over the front sight, ideal accessory to bring your optic to the most comfortable and safest shooting height. Available in two styles, A must have picatinny rail riser mounts for hunting shooting!
- With 8 Slots Long Picatinny Rails Top 8-slot 3.34 Long picatinny rails design,allowing you add on any standard picatinny or weaver accessories, Ideal for mounting scopes, optics and red dot sights, flashlight or other accessories.
- Perfect Fit On Picatinny Rail Riser mounting base fits on standard 21mm Picatinny/ Weaver rail. Two locking thumb screw design on side for easy and quick install or remove. [ Note: Tighten the screw of the low profile riser mount by allen wrench].
- See Through Design, Sturdy & Durable Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty; Made from premium aluminum alloy & high-strength steel, with matte black hard coat anodized, lightweight solid, safe durable.
- Available In 0.5 Inch Low Profile & 1 Inch High Profile Low Profile - 0.5'' Saddle Height - 8 Slots / 3.34 Inch Length - Weight: 2.8 Oz - with 1 x Allen Wrenchs - 1Pcs; High Profile - 1'' Saddle Height - 8 Slots / 3.34 Inch Length - Weight: 4.12 Oz - 1Pcs. The combination of High and Low allows you to replace each other in different scenarios, perfectly meeting your various needs!
- See more on Amazon...
Brand: LONSEL | Manufacturer: FENTUK
Dimensions: 1.20 x 3.35 x 1.72 inches
See On Amazon #2
UTG Leapers MT-RSX5S Inc Super Slim Picatinny Riser Mount, 1/2" Height, 3 Slots, Black
Asin: B01CKYYH7K | Model: MT-RSX5S | PartNumber: MT-RSX5S | Ean: 4717385552029
Distinctive Scalloped Picatinny Slots For Snag Free Accessory Mounting.
Included Components: Torx Wrench.
The Package Weight Of The Product Is 4 Pounds.
A Fresh New Look Precision Cnc Machined From 6061-T6 Aircraft Grade Aluminum And Finished In A Matte Black Anodize.
Features
- UTG Super slim Picatinny riser mount, 0.5" saddle height, 3 slots, 1.57" in length
- A fresh new look precision CNC Machined from 6061-T6 aircraft grade aluminum and finished in a matte black anodize
- Distinctive scalloped Picatinny slots for snag free accessory mounting
- The Package Weight Of The Product Is 4 Pounds
- Included components: Torx wrench
- See more on Amazon...
First Available: 06/28/2018
Brand: Leapers | Manufacturer: Leapers, Inc.
Dimensions: 3.00 x 6.00 x 4.00 inches | Weight: 0.06 pounds
Warranty: Lifetime Warranty
See On Amazon #3
LONSEL Picatinny Riser Mount, Low Profile Rail Riser Mounts Adaptor with QD Lever Lock Quick Release & 5 Slots Picatinny Rails for Scope Rings Optics Sights, 1/2" H x 2.5''L (1 Pack)
Asin: B0C4HD4FDT | Ean: 0759838982599 | UPC: 759838982599
✌【Premium Aircraft Aluminum, Solid & Durable】- Precision Machining Of Aircraft Grade 6061 Aluminum Alloy + Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Build No Wobble Or Rattle. Item Size: 2.56"L X 1.96''W X 0.78''H; Item Weight: 2.71Oz/1 Pcs..
✌【Qd Lever Lock Quick Release】- Quick Detach Design, Side Lever Locking With Spring Tension Control, And Adjustment Nuts By Comes With Allen Wrenchs To Achieve Custom Fit And Tension, Easy And Quick To Remove Or Install..
✌【With 5 Slots Picatinny Rails】- Top 5 Slots Picatinny Rail Design, Allowing You Add On Any Standard Picatinny Or Weaver Accessories, Such As Red Dots, Micro Red Dot, Microdot, Backup Sights, Scopes, Optics, Flashlight And Other Accessorie..
Features
- Low Profile Picatinny Riser Mount - LONSEL 1 Pack 5 Slot Low Profile Picatinny Riser Mounts with 1/2'' Riser Style, It's Designed to Lift Your Optics Providing A Clear View Over The Front Sight. Perfect for Mounting Various Red Green Dot, Sights, Scope Rings, Optics, Or More Other Accessories.
- With 5 Slots Picatinny Rails - Top 5 Slots Picatinny Rail Design, Allowing You Add On Any Standard Picatinny or Weaver Accessories, Such As Red Dots, Micro Red Dot, Microdot, Backup Sights, Scopes, Optics, Flashlight and Other Accessorie.
- Premium Aircraft Aluminum, Solid & Durable - Precision Machining of Aircraft Grade 6061 Aluminum Alloy + Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Build No Wobble or Rattle. Item Size: 2.56L x 1.96''W x 0.78''H; Item Weight: 2.71oz/1 pcs.
- QD Lever Lock Quick Release - Quick Detach Design, Side Lever Locking with Spring Tension Control, and Adjustment Nuts By Comes With Allen Wrenchs To Achieve Custom Fit and Tension, Easy and Quick To Remove or Install.
- See more on Amazon...
Brand: LONSEL | Manufacturer: LONSEL
Dimensions: 0.73 x 2.56 x 1.97 inches
Warranty: 6-Month Warranty
See On Amazon #4
UTG Leapers MT-RSX8S Inc Ss Picatinny Riser Mount, Black, 0.83"
Asin: B01CKYYH16 | Model: MT-RSX8S | PartNumber: MT-RSX8S | Ean: 4717385552043
Distinctive Scalloped Picatinny Slots For Snag Free Accessory Mounting.
The Package Weight Of The Product Is 3 Pounds.
A Fresh New Look Precision Cnc Machined From Aircraft Grade Aluminum And Finished In A Matte Black Hard Coat Anodize.
Features
- UTG Super slim Picatinny riser mount, 0.83" saddle height, 3 slots, 1.57" in length
- A fresh new look precision CNC Machined from aircraft grade aluminum and finished in a matte black hard coat anodize
- Distinctive scalloped Picatinny slots for snag free accessory mounting
- The Package Weight Of The Product Is 3 Pounds
- See more on Amazon...
Brand: UTG | Manufacturer: Leapers, Inc.
Dimensions: 1.00 x 4.00 x 3.00 inches | Weight: 0.07 pounds
Warranty: Limited Lifetime
See On Amazon #5
3-slot Slim Picatinny Short Riser Mount 1" High, 3 Slots, Black
Asin: B01BI0I9AS | Model: MT-RSX1S | PartNumber: MT-RSX1S | Ean: 4717385551947, 0350102458316 | UPC: 350102458316
Continuous Rail Edge Design Allows The Installation Of Multiple Riser Mounts Side By Side To Form One Continuous Picatinny Rail..
Distinctive Scalloped Picatinny Slots For Snag Free Accessory Mounting..
1" Saddle Height And 3 Picatinny Slots To Accommodate A Wide Variety Of Different Optics..
Pretty Small, High Riser Mount Easy To Install Making It Convenient For You Just Loosen The Screws And It Will Snap Over Picatinny Rail..
Features
- Introducing our new 3-slot Slim Picatinny Short Riser Mount will fit in any picatinny rail.
- Pretty small, high riser mount easy to install making it convenient for you just loosen the screws and it will snap over picatinny rail.
- Continuous Rail Edge Design Allows the Installation of Multiple Riser Mounts Side by Side to Form One Continuous Picatinny Rail.
- 1 Saddle Height and 3 Picatinny Slots to Accommodate a Wide Variety of Different Optics.
- Distinctive Scalloped Picatinny Slots for Snag Free Accessory Mounting.
- See more on Amazon...
Brand: UTG | Manufacturer: Leapers, Inc.
Dimensions: 2.00 x 4.00 x 3.00 inches | Weight: 0.06 pounds
Warranty: Limited Lifetime
See On Amazon #6
Monstrum Lockdown Series Adjustable Height Picatinny Riser Mount with Quick Release | 2.5 inch
Asin: B076XQQ8PK | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0704715311931 | UPC: 704715311931
Riser Can Be Adjusted Incrementally Via Two Locking Screws From 0.87 Of Rise Up To 1.14 Inch Of Rise, Measured From Rail Surface To Rail Surface.
Available In 3 Slot/1.75 Inch, 5 Slot/2.5 Inch, 7 Slot/3.5 Inch, Or 13 Slot/5.75 Inch Versions For Application With All Scopes, Red Dots, And Optics.
Attaches And Detaches Quickly And Securely Via Adjustable Tension Quick Release Mechanism.
Innovative Patent Pending Adjustable Height Design Allows For Optimal Placement Of Your Optic Based On Rifle Setup Or Preferred Cheek Weld.
Features
- Picatinny riser mount for use with Picatinny or Weaver base optics
- Innovative patent pending adjustable height design allows for optimal placement of your optic based on rifle setup or preferred cheek weld
- Riser can be adjusted incrementally via two locking screws from 0.87 of rise up to 1.14 inch of rise, measured from rail surface to rail surface
- Attaches and detaches quickly and securely via adjustable tension quick release mechanism
- Available in 3 Slot/1.75 inch, 5 Slot/2.5 inch, 7 slot/3.5 inch, or 13 Slot/5.75 inch versions for application with all scopes, red dots, and optics
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
See On Amazon #7
Feyachi TRM10 Adjustable Height Picatinny Riser Mount, 3 Slots Optic Riser Mount for Red Dot Sight
Asin: B0932V7PD5
Riser Mount For Red Dot Scope With Picatinny Or Weaver Rail..
Item Size: 1.96"L X 1.54''W; Item Weight: 2Oz..
Made Of High-Quality Aircraft Aluminum, Resistant To High And Low Temperature, Anti-Corrosion, Anti-Rust, Sturdy & Lightweight Construction..
Easy To Adjust The Height. Can Be Adjusted Incrementally Via Two Locking Screws From 0.75 Of Rise Up To 1 Inches Of Rise, Measured From Rail Surface To Rail Surface..
Features
- Offers three height options(.75 inch, .83 inch, and 1 inch), Lower 1/3 co-witness /Absolute co-witness with iron sight when you install it on your red dot sight.
- Easy to adjust the height. Can be adjusted incrementally via two locking screws from 0.75 of rise up to 1 inches of rise, measured from rail surface to rail surface.
- Riser mount for red dot scope with Picatinny or Weaver rail.
- Made of high-quality aircraft aluminum, resistant to high and low temperature, anti-corrosion, anti-rust, sturdy & lightweight construction.
- Item Size: 1.96L x 1.54''W; Item Weight: 2oz.
- See more on Amazon...
Brand: Feyachi | Manufacturer: Feyachi
See On Amazon #8
Monstrum Shrapnel Offset Picatinny Riser Mount with Recoil Stop Base | 8 Slot 3.5 inch | Low Profile
Asin: B0BBSHLX58 | Ean: 0810088811876 | UPC: 810088811876
Available In Low And Medium Profile Heights. The Low Profile Mount Provides 0.42 Inches Of Rise Over The Receiver Rail. The Medium Profile Provides 0.88 Inches Of Rise..
Single Piece Machined 6061 Grade Aluminum Profile Is Designed To Shave Off Precious Ounces Of Weight.
Picatinny Base Is Equipped With Custom Recoil Stop Bolts That Slot Seamlessly Into Your Picatinny Rail With Zero Wiggle - Guaranteed To Hold Zero Against The Toughest Of Recoil.
Picatinny Base Measures 2 Inches (Or 4 Picatinny Slots) In Length While The Top Rail Measures 30 Inches (8 Total Picatinny Slots). The Rail Extends An Extra 1.5 Inches Over The Front Of The Base, Allowing For More Forward Positioning Of Long Eye Relief Optics.
Features
- Low profile offset picatinny riser mount with 1.5 inches of forward extension for more flexible optic placement and eye relief positioning
- Picatinny base measures 2 inches (or 4 picatinny slots) in length while the top rail measures 30 inches (8 total picatinny slots). The rail extends an extra 1.5 inches over the front of the base, allowing for more forward positioning of long eye relief optics
- Available in low and medium profile heights. The low profile mount provides 0.42 inches of rise over the receiver rail. The medium profile provides 0.88 inches of rise.
- Picatinny base is equipped with custom recoil stop bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
- Single piece machined 6061 grade aluminum profile is designed to shave off precious ounces of weight
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
See On Amazon #9
UTG Super Slim 3 Slots Picatinny Riser Mount, 0.75", Black
Asin: B01CKYYH4S | Model: MT-RSX7S | PartNumber: MT-RSX7S | Ean: 4717385552036
Lightning Cuts Massively Reduce Weight Resulting In A Fully Capable, Low Mass, And Aesthetically Pleasing Picatinny Riser Mount.
Includes T20 Torx Allen Wrench For A Simple And Friendly Installation, No Gunsmith Required.
Continuous Rail Edge Design, Installing Multiple Riser Mounts Side By Side Forms One Continuous Picatinny Rail.
Equipped With Square-Shaped Integral Recoil Stop And Locking Torx Screw For A Guaranteed Zero Hold.
Features
- Made from 6061-t6 aluminum with precision CNC machining and finished in matte black hard coat anodize
- Equipped with square-shaped Integral Recoil Stop and locking Torx screw for a guaranteed zero hold
- Lightning cuts massively reduce weight resulting in a fully capable, low mass, and aesthetically pleasing Picatinny riser mount
- Continuous rail edge design, installing multiple riser mounts side by side forms one continuous Picatinny rail
- Includes T20 Torx Allen wrench for a simple and friendly installation, no gunsmith required
- See more on Amazon...
Brand: UTG | Manufacturer: Leapers, Inc.
Dimensions: 0.75 x 1.57 x 1.10 inches | Weight: 0.07 pounds
Warranty: Lifetime
See On Amazon #10
Fidragon Picatinny Riser Mount, Weaver 1" High Profile 8 Slot, for Red Dots, Scopes, and Optics
Asin: B07S86MPFP | Ean: 0778942939374 | UPC: 778942939374
High Profile Riser Mounting Base Fits On Standard Picatinny Or Weaver Rail.
Made Of Lightweight Aircraft-Grade Aluminum, It Weighs Only 76G.
Two Locking Nuts And Cross Bolts For Easy And Quick Installation.
1" Saddle Height With See-Through Design Allows For Use With The Original Iron Sights.
Features
- 3.3" long Picatinny rail 8 slots adds height to attach an optic, light or laser sight
- 1 saddle height with see-through design allows for use with the original iron sights
- High profile riser mounting base fits on standard Picatinny or Weaver rail
- Two locking nuts and cross bolts for easy and quick installation
- Made of lightweight aircraft-grade aluminum, it weighs only 76g
- See more on Amazon...
Brand: Fidragon | Manufacturer: Fidragon
See On Amazon #11
AT3 Tactical PRO-Mount Mini Riser Mount .83 and 1 - for RD-50 Red Dot Sight & Any Picatinny/Weaver Scope (1.0 Inch)
Asin: B07G3HJHN9 | Ean: 0783935100150 | UPC: 783935100150
Light Weight - At Only 1.1 Oz, This Is One Of The Lightest Red Dot Risers Out There!.
Lifetime Warranty - At3 Tactical Stands Behind Its Products. If You Experience An Issue, We Will Make It Right..
Inside The Box - Includes Allen Wrench For Tightening The Riser To Your Platform.
Cantilever Design - The Angled, Single-Rail Mount Keeps The Red Dot Forward For Fast Target Acquisition.
Features
- CHOOSE YOUR MOUNT - .83" Riser for Absolute Cowitness, and 1.0" Riser for Lower 1/3 Cowitness
- CANTILEVER DESIGN - The angled, single-rail mount keeps the red dot forward for fast target acquisition
- LIGHT WEIGHT - At only 1.1 oz, this is one of the lightest red dot risers out there!
- INSIDE THE BOX - Includes Allen wrench for tightening the riser to your platform
- LIFETIME WARRANTY - AT3 Tactical stands behind its products. If you experience an issue, we will make it right.
- See more on Amazon...
Brand: AT3 Tactical | Manufacturer: AT3 Tactical
Weight: 0.07 pounds
Warranty: Lifetime Warranty
See On Amazon #12
UTG Leapers MT-RSX8L Inc Super Slim Picatinny Riser Mount, 0.83" Height, 13 Slots, Black
Asin: B01CKYYGLC | Model: MT-RSX8L | PartNumber: MT-RSX8L | Ean: 4717385552012
Distinctive Scalloped Picatinny Slots For Snag Free Accessory Mounting.
Included Components: Torx Wrench.
A Fresh New Look Precision Cnc Machined From 6061-T6 Aircraft Grade Aluminum And Finished In A Matte Black Anodize.
Features
- UTG Super slim Picatinny riser mount, 0.83" saddle height, 13 slots, 5.5" in length
- A fresh new look precision CNC Machined from 6061-T6 aircraft grade aluminum and finished in a matte black anodize
- Distinctive scalloped Picatinny slots for snag free accessory mounting
- Included Components: Torx Wrench
- See more on Amazon...
Brand: UTG | Manufacturer: Leapers, Inc.
Dimensions: 2.00 x 8.00 x 3.00 inches | Weight: 0.18 Pounds
Warranty: Limited lifetime warranty
See On Amazon #13
Monstrum Tactical Lockdown Series Lightweight Riser Mount | High Profile | 2.2 inch L / 5 Slot
Asin: B078W8B28Z | Ean: 0704715312150 | UPC: 704715312150
2.2 Inches In Length With 5 Picatinny Rail Slots.
All Monstrum Tactical Lockdown Series Riser Mounts Come With A Lifetime Guarantee.
High Profile In Height, Providing 0.92 Inches Of Rise.
Redesigned Locking Nut Fastened By Hand, Wrench Or Screwdriver, Guaranteed To Hold Zero Against The Heaviest Of Recoil.
Features
- Hollow body single piece machined aluminum riser mount, designed to shave precious ounces of weight off your build
- Redesigned locking nut fastened by hand, wrench or screwdriver, guaranteed to hold zero against the heaviest of recoil
- 2.2 inches in length with 5 Picatinny rail slots
- High profile in height, providing 0.92 inches of rise
- All Monstrum Tactical Lockdown Series Riser Mounts come with a lifetime guarantee
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum Tactical
See On Amazon #14
UTG Med-pro Compact Riser Mount, 0.83" High, 3 Slots , Black
Asin: B003TX2BD4 | Model: MNT-RS08S3 | PartNumber: MNT-RS08S3 | Ean: 4712274526501
Side Plate With Spring Tension For Quick And Easy Installation.
Dimensions: 1.6 By 1.75 By 1 Inches (L X W X H). Included Components - Riser Mount. Material - Aluminum. Sport Type - Hunting..
Precision Machined From Aircraft Aluminum With Matte Black Anodizing. Department - Unisex-Adult..
1 Picatinny Rail With 3 Slots.
Features
- New Gen. riser mount for rifles with Picatinny/Weaver rail
- 1 Picatinny rail with 3 slots
- Side plate with spring tension for quick and easy installation
- Precision machined from aircraft aluminum with matte black anodizing. Department - unisex-adult.
- Dimensions: 1.6 by 1.75 by 1 inches (L x W x H). Included Components - Riser Mount. Material - Aluminum. Sport Type - Hunting.
- See more on Amazon...
First Available: 06/07/2010
Brand: UTG | Manufacturer: Green Supply
Dimensions: 1.18 x 3.70 x 3.15 inches | Weight: 0.13 pounds
Warranty: Lifetime Warranty
See On Amazon #15
LThyzszb Red Dot Riser Mount 2 Height for T1/2 H1 H2 Optic Sight Scope Riser Mount, (Black)
Asin: B09927LSC4 | Ean: 5713627310111
Riser Mount Designed For T1/2 H1 / H2 / Rome0 5 / Compm5 And Other Pptics With Footprint, The Base Has A Universal Standard Picatinny Rail Seat, You Can Directly Fix It On The 20Mm Picatinny Rail..
Red Dot Sight Mount, Rugged 7075 Aluminum Matte Hard Coat Anodized , Offer Durable Safe Performance In Using, Lightweight & Solid-Style. (Weights Only 2.61 Oz. ).
Features
- Red Dot Sight Mount Includes 1 Base, 2 Screws , 1 Wrenches.
- Red Dot Sight Mount, Rugged 7075 Aluminum Matte Hard Coat Anodized , Offer Durable Safe Performance In Using, Lightweight & Solid-Style. (Weights Only 2.61 oz. )
- Riser Mount Designed for T1/2 H1 / H2 / Rome0 5 / CompM5 and Other Pptics With Footprint, The Base Has a Universal Standard Picatinny Rail Seat, You Can Directly Fix it on the 20mm Picatinny Rail.
- See more on Amazon...
Brand: LThyzszb | Manufacturer: Longtingequip
Dimensions: 0.94 x 2.00 x 2.00 inches | Weight: 0.22 Pounds
See On Amazon #16
LThyzszb Picatinny Optics Riser Mount Red Dot Riser Mount 8 Slot Picatinny Rail 3.5 inch for Red Dot Sight Scope Mount (Black)
Asin: B091GS5BFK | Ean: 6438171051646
3.【Widely Used】 Picatinny Riser Mount Is Suitable For Any Red Dot/Sight/Scope/Optic With 21Mm Picatinny Rail Mount And Other Tactical Accessories..
4. Any Issue, Just Contact Us Through Your Buyer Center To Enjoy An Efficient Solution. We Stand By The Quality Of Our Product..
2.【Premium Craft & Material】Rugged 7075 Aluminum Matte Hard Coat Anodized , Offer Durable Safe Performance In Using, Lightweight & Solid-Style. (Weights Only 3.5 Oz. ).
Features
- 1. PROFESSIONAL AVIATION ALUMINUM RISER MOUNT Aviation Aluminum Optic Riser Mount come in 8 Slots. 1 Pcs Wrench.
- 2. PREMIUM CRAFT & MATERIAL Rugged 7075 Aluminum Matte Hard Coat Anodized , Offer Durable Safe Performance In Using, Lightweight & Solid-Style. (Weights Only 3.5 oz. )
- 3. WIDELY USED Picatinny Riser Mount is Suitable for Any Red Dot/Sight/Scope/Optic With 21mm Picatinny Rail Mount and Other Tactical Accessories.
- 4. Any Issue, Just Contact us Through Your Buyer Center to Enjoy an Efficient Solution. We Stand by the Quality of our Product.
- See more on Amazon...
Brand: LThyzszb | Manufacturer: Aichao
See On Amazon #17
Monstrum Lockdown Series Picatinny Riser Mount |1.75 inch L | 3 Slot | High Profile
Asin: B072N9KND7 | Ean: 0704715316400 | UPC: 704715316400
1.75 Inches In Length With 3 Picatinny Rail Slots.
All Monstrum Tactical Lockdown Series Riser Mounts Come With A Lifetime Guarantee.
High Profile In Height, Providing 0.92 Inches Of Rise.
Redesigned Locking Nut Fastened By Hand, Wrench Or Screwdriver, Guaranteed To Hold Zero Against The Heaviest Of Recoil.
Features
- Hollow body single piece machined aluminum riser mount, designed to shave precious ounces of weight off your build
- Redesigned locking nut fastened by hand, wrench or screwdriver, guaranteed to hold zero against the heaviest of recoil
- 1.75 inches in length with 3 Picatinny rail slots
- High profile in height, providing 0.92 inches of rise
- All Monstrum Tactical Lockdown Series Riser Mounts come with a lifetime guarantee
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
See On Amazon #18
Vortex Optics Razor Red Dot Sight Quick-Release Riser Mount,Black
Asin: B008FUAVJC | Model: MT-5108 | PartNumber: MT-5108 | Ean: 0875874004795 | UPC: 875874004795
Features The Auto Lock Lever System With The Following Advantages: Doesn't Require Proprietary Tools, Can Be Adjusted With Finger Or Flathead Screwdriver, Lever Can Lock To Front Or Rear, And Superior Clamping Surface Ensures Maximum Rail Engagement..
The Riser Mount Provides A Rise .6 Inches (15.3Mm) Above The Base Surface. Weighs 3 Ounces. Made With Pride In The U.S.A..
When Used In Conjunction With The Picatinny Clamp Included With The Razor, This Mount Positions The Red Dot Of The Razor In The Lower Third Of The Field Of View When Co-Witnessed With The Iron Sights..
Features
- The Riser Mount with a quick release lever is designed for mounting the Razor red dot sight onto a flattop style rifle as the primary optic. Provides lower 1/3 co-witness with the Razor red dot and absolute co-witness with the SPARC red dot.
- When used in conjunction with the Picatinny clamp included with the Razor, this mount positions the red dot of the Razor in the lower third of the field of view when co-witnessed with the iron sights.
- Features the Auto Lock Lever System with the following advantages: doesn't require proprietary tools, can be adjusted with finger or flathead screwdriver, lever can lock to front or rear, and superior clamping surface ensures maximum rail engagement.
- The Riser Mount provides a rise .6 inches (15.3mm) above the base surface. Weighs 3 ounces. Made with pride in the U.S.A.
- See more on Amazon...
First Available: 01/23/2023
Brand: Vortex | Manufacturer: Vortex Optics
Dimensions: 3.00 x 5.80 x 2.60 inches | Weight: 0.03 Pounds
Warranty: Manufacture Warranty
See On Amazon #19
Monstrum High Profile Picatinny Riser Mount (1" H x 5.7" L), for Scopes and Optics
Asin: B01BFYLRLK | Ean: 0740016797814 | UPC: 740016797814
See Through Design For Use With Iron Sights.
All Monstrum Tactical Mount And Accessory Products Come With A Lifetime Guarantee.
Sturdy And Lightweight, 6 Ounces In Weight, Crafted From Aircraft Grade Aluminum.
5.7 Inches In Length, Picatinny Rail Mount, Will Accommodate All Picatinny Or Weaver Standard Scopes, Red Dots, And Optics.
Features
- 1-inch-high riser mount for scopes and optics, allows for sight clearance over front sights
- 5.7 inches in length, Picatinny rail mount, will accommodate all Picatinny or Weaver standard scopes, red dots, and optics
- See through design for use with iron sights
- Sturdy and lightweight, 6 ounces in weight, crafted from aircraft grade aluminum
- All Monstrum Tactical mount and accessory products come with a lifetime guarantee
- See more on Amazon...
Brand: Monstrum | Manufacturer: Monstrum
See On Amazon #20
TPO 3 Slots Picatinny Riser Mount (0.5"/0.83"/1" Height), See-Thru Rail Riser Mount for Red Dots, Scopes, Optics, Flashlight (Medium - 0.83")
Asin: B0BZTCK2R6
Hex Bolt Design Provides Easy And Quick Installation. You Can Easily Adjust Optics To The Comfortable Shooting Height..
Made Out Of Durable High Quality Material - 6061-T6 Aluminium Alloy. Sturdy, Lightweight And Durable..
See Through Feature Allows You To Use Iron Sights..
3-Slot Picatinny Riser Mount. Height: 0.83 Inch; Length: 43Mm; Width: 21Mm..
Features
- Easy to install - Easily and securely mounts to standard Picatinny rails.
- 3-Slot Picatinny riser mount. Height: 0.83 Inch; Length: 43mm; Width: 21mm.
- Hex bolt design provides easy and quick installation. You can easily adjust optics to the comfortable shooting height.
- See through feature allows you to use iron sights.
- Made out of durable high quality material - 6061-T6 aluminium alloy. Sturdy, lightweight and durable.
- See more on Amazon...
Brand: TPO | Manufacturer: TPO
See On Amazon
Looking For Something Else?
Search