Logarithmic Detector Logarithmic Power Meter AD8317 1M-10GHz 60dB RF Power Meter Amplifier Controller
Asin: B07Y8HSC3Z | Model: AD8317 | PartNumber: AD8317 | Ean: 0719233403167 | UPC: 719233403167
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✔ Rf Range -- The Greater The Amplitude Or Power Of The Rf , The Higher The Output Voltage, And The Output Voltage Is Directly Proportional To The Logarithm Of The Input Amplitude, Thus Expanding The Dynamic Range Of The Detected , Which Ranges Reach 55Db..
✔ Wide Application -- Application: Rf Transmitter Pa Set Point Control And Level Monitoring; Power Monitoring In A Radio Line Transmitter; Rssi Measurements In Base Stations, Wlan, Wimax, And Radar..
✔ Gain Control -- It Can Be Widely Used In Radio Frequency Detection, Power Measurement, Environmental Field Strength Detection. It Can Also Be Used As Part Of Automatic Gain Control And Automatic Level Control..
✔ Range -55 To 0Dbm -- Can Detect Power In -55Dbm To 0Dbm Of An Rf , So That The Rf Is Converted To Dc Voltage Output..
Features
- DETECT RF -- The product is designed by using AD8317 chip, and is used for RF power detection.
- RANGE -55 to 0DBM -- Can detect power in -55dBm to 0dBm of an RF , so that the RF is converted to DC voltage output.
- RF RANGE -- The greater the amplitude or power of the RF , the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input amplitude, thus expanding the dynamic range of the detected , which ranges reach 55dB.
- GAIN CONTROL -- It can be widely used in radio frequency detection, power measurement, environmental field strength detection. It can also be used as part of automatic gain control and automatic level control.
- WIDE APPLICATION -- Application: RF transmitter PA set point control and level monitoring; Power monitoring in a radio line transmitter; RSSI measurements in base stations, WLAN, WiMAX, and radar.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 2.36 x 3.15 x 2.76 inches | Weight: 0.02 pounds
See On Amazon Similar To Logarithmic Detector Logarithmic Power Meter
#1
D YEDEMC Fiber Optic Cable Tester Portable Optical Fiber Power Meter FC/SC/ST Universal Interface Fiber Tester Built-in 2Mw Visual Fault Locator (OPM-VFL-2)
Asin: B07XMLX8TR | Model: OPM-VFL-2 | PartNumber: OPM-VFL-2 | Ean: 0782855705391 | UPC: 782855705391
Support Fc/Sc/St Universal Interface,Support Rj45 Testing,Support Simultaneous Disply Of Linear Mw And Non-Linear Index Dbm..
Lifetime Friendly Customer Service,If Have Problem,Pls Contact Us..
The Light Power Meter & Vfl ,Test Precision, Fine Workmanship, Easy To Carry,Completely Replace The Optical Power Meter And Red Pen 2 Products. Come With English Manual.
Support Lighting,Support Automatic Shutdown,Support Backlight Selection, Support Wavelenghth Memory Function,Support User Calibration..
Features
- Function: can measure 8 standdard wavelengths 850/980/1300/1310/1490/ 1550/1625/1650nm , test range: -70dBm~+6dBm, 2mw red light source.
- Support lighting,Support automatic shutdown,Support backlight selection, Support wavelenghth memory function,Support user calibration.
- Support FC/SC/ST universal interface,Support RJ45 testing,Support simultaneous disply of linear mW and non-linear index dBm.
- The light power meter & VFL ,Test precision, fine workmanship, easy to carry,completely replace the optical power meter and red pen 2 products. Come with English manual
- Lifetime Friendly Customer Service,if have problem,pls contact us.
- See more on Amazon...
Brand: D YEDEMC | Manufacturer: Yide Machinery Co. Ltd.
Weight: 0.31 pounds
See On Amazon #2
YGGYM Optical Power Meter with Visual Fault Locator, Fiber Light Meter with Cable Tester Function and Li-ion Battery USB Charge for FC/SC/ST Universal Interface
Asin: B0974V66PT | Model: Y8 | PartNumber: Y8 | Ean: 0756588929645 | UPC: 756588929645
【Vfl & Cable Tester】Visual Fault Locator To Locate Fiber Breakage Or Winding, With Continuous And Flashing Working Modes. Automatically Runs All Tests And Checks For Continuity, Whether A Lan Cable Is In Good Condition Or Broken Circuit..
【Time And Money Saver】Helpful Testing Both Optical Fiber Cables And Lan Cables. No More Calls, No More Cost, Find And Test It By Yourself. And Please Feel Free To Contact Us If You Have Any Problems When Using It..
【Benefits For You】1100 Mah Li-Ion Battery, Usb Charge Port. Led Flashlight For Work In Darkness. Easy-To-Read Lcd Interface Displays Power Loss Data, Wavelength, Frequency, Battery Capacity And Battery Charge Status..
【Optical Fiber Power Meter】Fiber Cable Tester To Measure Fiber Loss, Supports 850 Nm, 980Nm, 1300 Nm, 1310 Nm, 1490 Nm, 1550 Nm And 1625 Nm Wavelengths..
Features
- 4-in-1 Multi-Functions OPM, VFL and Cable Tester function combined on 1 Unit, SM MM 7 wavelengths, test range: -70dBm~+10dBm, 5mw red light source.
- Optical Fiber Power Meter Fiber cable tester to measure fiber loss, supports 850 nm, 980nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm and 1625 nm wavelengths.
- VFL & Cable Tester Visual fault locator to locate fiber breakage or winding, with continuous and flashing working modes. Automatically runs all tests and checks for continuity, whether a lan cable is in good condition or broken circuit.
- Benefits for You 1100 mAh Li-ion Battery, USB Charge Port. LED flashlight for work in darkness. Easy-to-read LCD interface displays power loss data, wavelength, frequency, battery capacity and battery charge status.
- Time and Money Saver Helpful Testing both optical fiber cables and lan cables. No more calls, no more cost, find and test it by yourself. And please feel free to contact us if you have any problems when using it.
- See more on Amazon...
Brand: YGGYM | Manufacturer: YGGYM
Weight: 0.32 pounds
See On Amazon #3
QIIRUN Optical Power Meter -70~+10 dBm Fiber Light Meter for Testing 6 Calibrated Wavelengths, 68g Light Weighted
Asin: B07X7HWBPG | Ean: 0631384994496 | UPC: 631384994496
Low Power Consumption, Continuous Work More Than 80 Hours.
Compact And Portable Design, 68G In Weight, Ensuring Better Hand-Held Feeling / Easy Carry.
Universal 2.5Mm Interface, Supports Fc, Sc And St Connectors.
Automatic Measuring Range Adjustment And Remaining Power Indication.
Features
- Linear optical power and logarithmic power display, Relative value measurement
- Automatic measuring range adjustment and remaining power indication
- Low power consumption, continuous work more than 80 hours
- Universal 2.5mm interface, supports FC, SC and ST connectors
- Compact and portable design, 68g in weight, ensuring better hand-held feeling / easy carry
- See more on Amazon...
Brand: QIIRUN | Manufacturer: TL Tool
Dimensions: 1.18 x 4.72 x 1.30 Inches | Weight: 0.15 Pounds
See On Amazon #4
QWORK Optical Power Meter, -70~+10 dBm, with Universal 2.5mm Interface, Fiber Light Meter for Testing 6 Calibration wavelengths,Blue
Asin: B09Q8HHGP7 | Model: WD7262 | PartNumber: WD7262 | Ean: 0734900647484 | UPC: 734900647484
With Its Universal 2.5Mm Interface And Fit To Most Fc, Sc And St Connectors, This Optical Power Meter Is The Perfect Tool For All Your Measurements..
Low Power Consumption, More Than 80 Hours Of Continuous Operation..
Automatic Measuring Range Adjustment And Remaining Power Indication..
Seven Calibration Wavelengths Available - 850,1300, 1310, 1490, 1550, 1625..
Features
- Linear optical power and logarithmic power display, relative value measurement.
- Seven calibration wavelengths available - 850,1300, 1310, 1490, 1550, 1625.
- With its universal 2.5mm interface and fit to most FC, SC and ST connectors, this optical power meter is the perfect tool for all your measurements.
- Automatic measuring range adjustment and remaining power indication.
- Low power consumption, more than 80 hours of continuous operation.
- See more on Amazon...
Brand: QWORK | Manufacturer: QWORK
Weight: 1.00 Pounds
See On Amazon #5
BAOSHLA M50 Optical Fiber Power Meter -50+~26dbm Built-in Visual Fault Locator 30KM 4 in 1 Fiber Cable Tester (OPM&VFL)+RJ45 Tester with LED Lighting and FC-LC Adapter SC/FC/ST Universal Interface
Asin: B0CKQHJQKW
【Powerful Fiber Optic Tester】: The Mini Fiber Optic Tester Can Measure 10 Standdard Wavelengths 850/980/1270/1300/1310/1490/1550/1577/1625/1650Nm, Test Range: -50Dbm~+26Dbm..
【Portable】: Durable And Resistance To Falling, Small Size And Light Weight, Which Is Easy To Carry, Can Easily Fit In Pockets And Backpacks..
【Good Stability】: Using Sensitive Chip, This Handheld Optical Power Meter Has A Compact Size And A Sturdy Internal Structure For Stable And Reliable Operation..
【4 In 1 Function】Optical Power Meter & 30Mw Visual Fault Locator (Vfl) & Rj45 Network Test & Led Lighting..
Features
- HIGH ACCURACY OPTICAL POWER TESTING : Comes with calibration and relative power calculation function, the digital optic cable is easy to use. High precision and high-quality detector with measurement error less than 0.2db (manual calibration is available).
- 4 in 1 Function Optical power meter & 30MW Visual Fault Locator (VFL) & RJ45 Network test & LED Lighting.
- Powerful fiber optic tester : The mini fiber optic tester can measure 10 standdard wavelengths 850/980/1270/1300/1310/1490/1550/1577/1625/1650nm, test range: -50dBm~+26dBm.
- GOOD STABILITY : Using sensitive chip, this handheld optical power meter has a compact size and a sturdy internal structure for stable and reliable operation.
- Portable : Durable and resistance to falling, small size and light weight, which is easy to carry, can easily fit in pockets and backpacks.
- See more on Amazon...
Brand: BAOSHLA | Manufacturer: BAOSHLA
Dimensions: 1.18 x 4.37 x 2.70 inches
See On Amazon #6
RF Detector Module -72dBm-2dBm RF Power Meter Logarithmic Detector Microwave Radio Frequency Detection Module
Asin: B09R4YG1GD | Model: Hilitand16gvzqaehi6520 | PartNumber: Hilitand16gvzqaehi6520 | Ean: 5785646107416
Widely Applications: Widely Used In Rf Detection, Power Measurement, Environmental Field Strength Detection, Can Also Be Used As Part Of Automatic Gain Control And Automatic Level Control..
Advantages: The Larger The Rf Amplitude Or Power Is, The Higher The Output Voltage Is, Which Is Proportional To The Logarithm Of The Input Amplitude, Thus Enlarging The Dynamic Range Of The Detected That Is Up To 70Db..
Notice: As A Reliable Seller, We Always Do Our Best To Provide Good Quality And Excellent Service For Our Customers. Your Trust And Your Business Is So Important To Us..
Product Brief: This Logarithmic Detector Is Used For Rf Power Detection With Detection Frequency Ranging 0.1-2.5 Ghz. The Detection Slope Of This Logarithmic Detector Is 18Mv/Dbm (Typical Value)..
Features
- Premium Quality: The power meter can detect a RF of power from -72dBm to -2dBm and convert the RF into a DC voltage output, which has passed strict quality control, you can use it with confidence.
- Product Brief: This logarithmic detector is used for RF power detection with detection frequency ranging 0.1-2.5 GHz. The detection slope of this logarithmic detector is 18mV/dBm (typical value).
- Widely Applications: Widely used in RF detection, power measurement, environmental field strength detection, can also be used as part of automatic gain control and automatic level control.
- Notice: As a reliable seller, we always do our best to provide good quality and excellent service for our customers. Your trust and your business is so important to us.
- Advantages: The larger the RF amplitude or power is, the higher the output voltage is, which is proportional to the logarithm of the input amplitude, thus enlarging the dynamic range of the detected that is up to 70dB.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #7
Decibel Meter Sound Level Meter Data Logger with CD Software Audio Decibel Noise Measure Tester 30 130 dB Audio Noise Measuring Range with Backlit LCD Display, Data Record Function
Asin: B06Y59XZWH | Model: SLM25TK | PartNumber: SLM25TK | Ean: 0713072682523, 0713072682622 | UPC: 713072682622, 713072682523
➡Calibration You Can Trust - Decibel Noise Measure Tester The Built-In Sound Source Produces A Reliable 94Db Sound At 1Khz For Precise Calibration Of Your Meter..
➡Ac/Dc Function - Sound Level Meter Experience Flexibility In Power Options With Both Ac And Dc Functionality, Making It Suitable For Indoor And Outdoor Use..
➡Certified For Quality - Our Sound Level Meter Is Ce Certified, Meeting European Safety And Performance Standards. It Is Also Rohs Compliant, Promoting Environmental Sustainability..
➡Wide Frequency Response - Decibel Meter Capture A Broad Range Of Frequencies From 31.5Hz To 8.5Khz, Enabling Comprehensive Sound Analysis In Various Environments..
Features
- Effortless measurement - Our Professional Sound Level Meter features an auto range function, ensuring seamless and accurate readings across different sound levels.
- Wide Frequency Response - Decibel Meter Capture a broad range of frequencies from 31.5Hz to 8.5KHz, enabling comprehensive sound analysis in various environments.
- Calibration you can trust - Decibel Noise Measure Tester The built-in sound source produces a reliable 94dB sound at 1kHz for precise calibration of your meter.
- Certified for Quality - Our Sound Level Meter is CE certified, meeting European safety and performance standards. It is also RoHS compliant, promoting environmental sustainability.
- AC/DC Function - Sound Level Meter Experience flexibility in power options with both AC and DC functionality, making it suitable for indoor and outdoor use.
- See more on Amazon...
Brand: TEKCOPLUS | Manufacturer: TekcoPlus Ltd
Weight: 1.00 Pounds
See On Amazon #8
YWBL-WH Logarithmic Power Detector Meter AD8317 1M-10GHz 60dB RF Power Meter Logarithmic Detector Controller for Amplifier 50 Ohms, Module
Asin: B07RXZBJ74 | Model: YWBL WH | PartNumber: YWBL WH | Ean: 0701069457384 | UPC: 701069457384
55Db---The Greater The Amplitude Or Power Of The Rf , The Higher The Output Voltage, And The Output Voltage Is Directly Proportional To The Logarithm Of The Input Amplitude, Thus Expanding The Dynamic Range Of The Detected , Which Ranges Reach 55Db.
Wide Application---The Logarithmic Power Detector Could Be Widely Used Radio Frequency Detection, Power Measurement, Environmental Field Strength Detection, Or As A Part Of Automatic Gain Control And Automatic Level Control.
55Dbm To 0Dbm---The Logarithmic Power Detector Can Detect Power In -55Dbm To 0Dbm Of An Rf , So That The Rf Is Converted To Dc Voltage Output.
Application Areas---The Logarithmic Power Detector Could Be Used For Rf Transmitter Pa Set Point Control And Level Monitoring; Power Monitoring In A Radio Line Transmitter; Rssi Measurements In Base Stations, Wlan, Wimax, And Radar.
Features
- AD8317 CHIP---The logarithmic power detector is designed by using AD8317 chip, and is used for RF power detection
- APPLICATION AREAS---The logarithmic power detector could be used for RF transmitter PA set point control and level monitoring; Power monitoring in a radio line transmitter; RSSI measurements in base stations, WLAN, WiMAX, and radar
- 55dB---The greater the amplitude or power of the RF , the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input amplitude, thus expanding the dynamic range of the detected , which ranges reach 55dB
- 55dBm to 0dBm---The logarithmic power detector can detect power in -55dBm to 0dBm of an RF , so that the RF is converted to DC voltage output
- WIDE APPLICATION---The logarithmic power detector could be widely used radio frequency detection, power measurement, environmental field strength detection, or as a part of automatic gain control and automatic level control
- See more on Amazon...
Brand: YWBL-WH | Manufacturer: YWBL-WH
Dimensions: 2.36 x 3.15 x 2.76 Inches | Weight: 0.02 pounds
See On Amazon #9
AD8302 RF/IF Phase Detector Module LF-2.7G Phase Detection Impedance Analysis Module
Asin: B07RYWZ45L | Model: AD8302 | PartNumber: AD8302 | Ean: 0701069456332 | UPC: 701069456332
Supply Voltage : The Supply Voltage Of The Rf Detector Module Is 3.3V-5V, With Stable 1.8 V Reference Voltage Output, Small Envelope Brandwidth From Dc To 30 Mhz.
Wide Application : The Rf Detector Module Is Widely Used In Rf/If Pa Linearization; Precise Rf Power Control; Remote System Monitoring And Diagnostics; Return Loss/Vswr Measurements; Log Ratio Function For Ac.
Feature : The Measures Gain/Loss And Phase Up To 2.7 Ghz, Of Dual Demodulating Log Amps And Phase Detector, And Input Range -60 Dbm To 0 Dbm In A 50 Ω System.
Multi Modes : The Rf Detector Module Is Of Measurement/Controller/Level Comparator Modes, And Typical Nonlinearity < 0.5 Db, Typical Nonlinearity < 1 Degree.
Features
- Accuracy : The RF detector module is of accurate gain measurement scaling (30 mV/dB), and accurate phase measurement scaling (10 mV/Degree)
- Multi Modes : The RF detector module is of measurement/controller/level comparator modes, and typical nonlinearity < 0.5 dB, typical nonlinearity < 1 Degree
- Supply Voltage : The supply voltage of the RF detector module is 3.3V-5V, with stable 1.8 V reference voltage output, small envelope brandwidth from DC to 30 MHz
- Feature : The measures gain/loss and phase up to 2.7 GHz, of dual demodulating log amps and phase detector, and input range -60 dBm to 0 dBm in a 50 system
- Wide Application : The RF detector module is widely used in RF/IF PA Linearization; Precise RF Power Control; Remote System Monitoring and Diagnostics; Return Loss/VSWR Measurements; Log Ratio Function for AC
- See more on Amazon...
Brand: YWBL-WH | Manufacturer: YWBL-WH
Dimensions: 2.36 x 3.15 x 2.76 inches | Weight: 0.02 pounds
See On Amazon #10
Gigahertz Solutions HF35C High Frequency (HF) Electromagnetic Smog Meter
Asin: B01NBK9MKB
Accuracy: Basic Accuracy (Cw) Including Linearity Error: +/- 6 Db.
Average Operating Time: 6 - 7 Hours (Depending On Operating Mode), Low Battery Indicator, Auto Power Off Function.
Audio Analysis: Modulation Frequency And Field Strength-Proportional Audio Signal Supports The Identification Of Pulsed Radiation Sources (Gsm, Dect, Etc.) And The Detection Of Increased Exposure..
Power Supply: 9-Volt E-Block Alkaline Manganese Battery (Included).
Sensor: Logarithmic-Periodic Measuring Antenna.
Measuring Range : Power Flux Density: 0.1 - 1999 Μw/M².
Features
- Frequency range: 800MHz - 2.7GHz
- Measuring range : Power flux density: 0.1 - 1999 W/m
- Accuracy: Basic accuracy (CW) including linearity error: +/- 6 dB
- Sensor: Logarithmic-periodic measuring antenna
- Audio analysis: Modulation frequency and field strength-proportional audio signal supports the identification of pulsed radiation sources (GSM, DECT, etc.) and the detection of increased exposure.
- Power supply: 9-volt E-block alkaline manganese battery (included)
- Average operating time: 6 - 7 hours (depending on operating mode), low battery indicator, auto power off function
- See more on Amazon...
Brand: GIGAHERTZ SOLUTIONS | Manufacturer: Gigahertz Solutions
See On Amazon #11
AD8317 Logarithmic Detector Radio Frequency RF Power Meter 1M-10000MHz
Asin: B07FHZXTCZ | Ean: 0715538066427 | UPC: 715538066427
Wide Dynamic Range: The Output Voltage Is Directly Proportional To The Logarithm Of The Input Amplitude, Thus Expanding The Dynamic Range Of The Detected , Which Ranges Reach 55Db..
Automatic Use: This Logarithmic Power Meter Also Can Be Used As Part Of Automatic Gain Control And Automatic Level Control..
Wide Applications: It Can Be Widely Used In Radio Frequency Detection, Power Measurement, Environmental Field Strength Detection..
55Dbm To -0Dbm: Can Detect Power In -55Dbm To -0Dbm Of An Rf , So That The Rf Is Converted To Dc Voltage Output, Wide Range..
Features
- AD8317 CHIP: This logarithmic detector adopted AD8317 chip, and is used for RF power detection.
- 55dBm to -0dBm: Can detect power in -55dBm to -0dBm of an RF , so that the RF is converted to DC voltage output, wide range.
- WIDE DYNAMIC RANGE: The output voltage is directly proportional to the logarithm of the input amplitude, thus expanding the dynamic range of the detected , which ranges reach 55dB.
- WIDE APPLICATIONS: It can be widely used in radio frequency detection, power measurement, environmental field strength detection.
- AUTOMATIC USE: This logarithmic power meter also can be used as part of automatic gain control and automatic level control.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 pounds
See On Amazon #12
Koolertron DDS Signal Generator Counter, 2.8in Screen Display 80MHz High Precision Dual-Channel Arbitrary Waveform Generator Frequency Meter 275MSa/s
Asin: B0BBQN37LS
[Using Dual-Channel Dds Signal And Ttl Electric Level Output To Generate Precise] Stable, Low Distortion Output Signal. Includes Sine Wave, Square Wave, Triangle Wave, Saw Tooth Wave, Pulse Wave, White Noise, User-Defined Waveform Etc. Each Channel Can Be Independently Set The Parameters..
[This Signal Generator] Is The Ideal Instrument For Electronic Engineering, Laboratories, Production Lines, Teaching And Scientific Research..
[Can Draw Arbitrary Waveform]：Pc Software And Communication Protocol Are Provided For Free, Arbitrary Waveforms Can Be Drawn Using The Pc Software; Using The Communication Protocol Can Be Secondary Development Programming; All Functions Of The Instrument Can Be Controlled By The Pc Software (The Instrument Can Be Also Finished All Operations Without Connecting To The Computer.).
Storage Feature: You Can Store 100 Groups Instrument State Parameters Set By The User, Can Be Called Up To Reproduce. Frequency Output Of Sine Wave Can Be Up To 80Mhz. 275Msa/S Sampling Rate. Waveform Length Of Each One Is 8192 And Vertical Resolution Is 14 Bits.
[Function Generators] With Linear Sweep(Max. Up To 999.9S) And Logarithmic Frequency Sweep Functions.Has A Frequency Measurement, Period Measurement, Positive And Negative Pulse Width Measurement And Counting Function..
[The Signal Generator Counter] Can Be Connected To The Mobile Phone For Control And Operation, Which Is Very Convenient. After Downloading The App, You Can View The Relevant Data On The Mobile Phone, And You Can Set All Functions Through The Mobile App, And Support The Import And Export Of Arbitrary Waveform Data, Which Is Convenient And Fast..
Features
- [Arbitray Waveform Generator] adopts large scale FPGA integrated circuit and high speed MCU microprocessor. The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is greatly strengthened.
- [The Signal Generator Counter] can be connected to the mobile phone for control and operation, which is very convenient. After downloading the APP, you can view the relevant data on the mobile phone, and you can set all functions through the mobile APP, and support the import and export of arbitrary waveform data, which is convenient and fast.
- [Using Dual-channel DDS signal and TTL electric level output to generate precise] stable, low distortion output signal. includes Sine wave, Square wave, Triangle wave, Saw tooth wave, Pulse wave, white noise, user-defined waveform etc. each channel can be independently set the parameters.
- [Function Generators] With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting function.
- [Can Draw Arbitrary Waveform] PC software and communication protocol are provided for free, arbitrary waveforms can be drawn using the PC software; using the communication protocol can be secondary development programming; all functions of the instrument can be controlled by the PC software (The instrument can be also finished all operations without connecting to the computer.)
- Storage feature: You can store 100 groups instrument state parameters set by the user, can be called up to Reproduce. Frequency output of Sine wave can be up to 80MHz. 275MSa/s sampling rate. Waveform Length of each one is 8192 and vertical resolution is 14 bits
- [This Signal Generator] is the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientific research.
- See more on Amazon...
Brand: Koolertron | Manufacturer: Koolertron
Weight: 3.13 Pounds
See On Amazon #13
Hilitand Fiber Light Attenuation Tester Handheld Rechargeable Optical Power Meter for Maintenance
Asin: B0B6HDL13C
Universal Interface: The Fiber Optic Power Meter Is Support Fc/Sc/St Universal Interface, Display Resolution: Linear Display: 0.1%; Logarithmic Display: 0.01Dbm..
Simple Working: Comes With Sensitive Chip And Sturdy Internal Structure, Just Plug And Play, Also Ensures Quick Response..
The Wavelength: 850Nm, 980Nm, 1300Nm, 1310Nm, 1490Nm, 155Nm And 1625 Nm, 7 Kinds Wavelength Will Meet Your Working Needs..
Reliable Using: The Power Meter Supports Fast And Accurate Measurement Without Waiting For Warm Up, With Relative Power Calculation And Self Calibration..
Features
- Better Testing: Designed to have a wide testing range of -50~+26dbm, the optical fiber power meter enables higher accuracy.
- Reliable Using: The power meter supports fast and accurate measurement without waiting for warm up, with relative power calculation and self calibration.
- Universal Interface: The fiber optic power meter is support FC/SC/ST universal interface, display resolution: linear display: 0.1%; logarithmic display: 0.01dBm.
- The Wavelength: 850nm, 980nm, 1300nm, 1310nm, 1490nm, 155nm and 1625 nm, 7 kinds wavelength will meet your working needs.
- Simple Working: Comes with sensitive chip and sturdy internal structure, just plug and play, also ensures quick response.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
See On Amazon #14
Duogalia Fiber Optic Tester Portable Fiber Light Power Meter -50~26dB Built-in 10mW Visual Fault Locator (OPM&VFL) with 1pc FC to LC Adapter
Asin: B0BX47X5K3 | Model: M50 | PartNumber: M50
[Professional] High Measurement Accuracy, Measurement Error Is Less Than ±0.2Db. Support Simultaneous Disply Of Linear Mw And Non-Linear Index Dbm..
[Intelligent ] The Fiber Light Meter Support Backlight Selection And Automatically Shutdown. It Can Store Up To 500 Sets Of Data, Which Can Be Viewed At Any Time. Support User Calibration..
[Portable] Small Size And Light Weight, Which Is Easy To Carry, Can Easily Fit In Pockets And Backpacks..
[Multifunction Fiber Optic Tools] 4 In 1 Function Includes Optical Power Meter, 10Mw Visual Fault Locator, Rj45 Network Test And Led Lighting. Using 2 Aaa Batteries (Not Included) ..
Features
- [Powerful fiber optic tester] The mini fiber optic tester can measure 10 standdard wavelengths 850/980/1270/1300/1310/1490/1550/1577/1625/1650nm, test range: -50dBm~+26dBm.
- [Multifunction Fiber Optic Tools] 4 in 1 function includes optical power meter, 10mW Visual Fault Locator, RJ45 network test and LED lighting. Using 2 AAA batteries (not included) .
- [Professional] High measurement accuracy, measurement error is less than 0.2dB. Support simultaneous disply of linear mW and non-linear index dBm.
- [Portable] Small size and light weight, which is easy to carry, can easily fit in pockets and backpacks.
- [Intelligent ] The fiber light meter support backlight selection and automatically shutdown. It can store up to 500 sets of data, which can be viewed at any time. Support user calibration.
- See more on Amazon...
Brand: Duogalia | Manufacturer: Duogalia
See On Amazon #15
1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection
Asin: B07B6M2768 | Model: Walfrontrchfxmap34 | PartNumber: Walfrontrchfxmap34 | Ean: 0654936014572 | UPC: 654936014572
The Higher Radio Frequency Signal Range Or Power Is, The Higher Output Voltage Will Be; Output Voltage Is Proportional To Logarithm Of Input Signal Range.
It Can Be Made Into 1Mw ~ 1Kw Rf Power Meter After Appropriate Transformation.
Widely Used For Rf Signal Detection, Signal Power Measurement, Environment Field Strength Detection, Can Also Be Used As A Part Of Automatic Gain Control And Automatic Level Control.
It Can Detect A Rf Signal Of Power From -74Dbm To 18Dbm, And Convert The Rf Signal Into A Dc Voltage Output.
Features
- The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ
- It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output
- The higher radio frequency signal range or power is, the higher output voltage will be; output voltage is proportional to logarithm of input signal range
- Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control
- It can be made into 1mw ~ 1kw RF power meter after appropriate transformation
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 Pounds
See On Amazon #16
RF Detector Module, Small and Compact Detector Module from 50 Hz to 3.8 GHz for Broadband Power Detection, RF Power Meter Logarithmic Detector Microwave Radio Frequency Detection Module
Asin: B0C3P8DBJS | Model: Gemerdyz43r9eb2 | PartNumber: Gemerdyz43r9eb2 | Ean: 7355777801538
【Widely Applications】Widely Used In Rf Detection, Power Measurement, Environmental Field Strength Detection, Rf Power Detector Can Also Be Used As Part Of Automatic Gain Control And Automatic Level Control. The Detector Module Is Small And Compact, Easy To Install And Use, And Has Strong Practicability..
【Excellent Material】The Rf Detector Is Made Of High Quality Circuit Board, Stable And Reliable. Can Detect The Rf Power Of Complex Modulated , Including Cdma, W‑Cdma, 8Psk, Qam And Ofdm. As A Reliable Seller, We Always Do Our Best To Provide Good Quality And Excellent Service For Our Customers..
【Advantages】The Larger The Rf Amplitude Or Power Is, The Higher The Output Voltage Is, Which Is Proportional To The Logarithm Of The Input Amplitude, Thus Enlarging The Dynamic Range Of The Detected. This Module Is Suitable For Wide‑Band Power Detection, With Flat Input And Output Response..
【Product Brief】This Logarithmic Detector Is Used For Rf Power Detection With Detection Operating Frequency 50Hz-3.8Ghz. The Detection Slope Of This Input Can Be From -52 Dbm To +8Dbm. The Detector Module Is Mainly Used To Detect Some Useful Information In Fluctuating..
Features
- Premium Quality The power meter can detect a RF of power from -52 dBm to +8dBm and convert the RF into a DC voltage output, which has passed strict quality control, you can use it with confidence. Suitable for IS95, CDMA2000, 3GPP, GSM/EDGE, MMDS and other broadband access equipment.
- Product Brief This logarithmic detector is used for RF power detection with detection Operating Frequency 50Hz-3.8GHz. The detection slope of this input can be from -52 dBm to +8dBm. The detector module is mainly used to detect some useful information in fluctuating.
- Widely Applications Widely used in RF detection, power measurement, environmental field strength detection, rf power detector can also be used as part of automatic gain control and automatic level control. The detector module is small and compact, easy to install and use, and has strong practicability.
- Advantages The larger the RF amplitude or power is, the higher the output voltage is, which is proportional to the logarithm of the input amplitude, thus enlarging the dynamic range of the detected. This module is suitable for wide band power detection, with flat input and output response.
- EXCELLENT MATERIAL The RF detector is made of high quality circuit board, stable and reliable. Can detect the RF power of complex modulated , including CDMA, W CDMA, 8PSK, QAM and OFDM. As a reliable seller, we always do our best to provide good quality and excellent service for our customers.
- See more on Amazon...
Brand: Gemer | Manufacturer: Gemer
See On Amazon #17
RF Power Meter, AD8317 Logarithmic Detector RF Signal Log Output Power Meter 1M-10000MHz Controller
Asin: B0C4MBJRTK | Model: Qiiluuqb2wc5iv4 | PartNumber: Qiiluuqb2wc5iv4
[ Excellent Performance ] --- The Greater The Rf Signal Amplitude Or Power, The Higher The Output Voltage, And The Output Voltage Is Proportional To The Logarithm Of The Input Signal Amplitude, Which Expands The Dynamic Range Of The Detected Signal By 55Db.
[ Precise Design ] --- Spi Interface Is Easy To Connect With Arno And Single Chip Microcomputer With 2.54Mm Pitch Pins.
[ Wide Application ] --- Widely Applied To Rf Signal Detection, Signal Power Measurement, Environmental Field Strength Detection, And Can Also Be Used As An Integral Part Of Automatic Gain Control And Automatic Level Control.
[ Detection Range ] --- Detection Frequency Range Is 1M-10Ghz, Which Can Detect An Rf Signal With A Power Of -55Dbm To -0Dbm, And Convert This Rf Signal Into Dc Voltage Output.
Features
- [ Function ] --- This power meter is designed with for ADI's AD8317 chip and used for RF signal power detection
- [ Detection Range ] --- Detection frequency range is 1M-10GHz, which can detect an RF signal with a power of -55dBm to -0dBm, and convert this RF signal into DC voltage output
- [ Excellent Performance ] --- The greater the RF signal amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, which expands the dynamic range of the detected signal by 55dB
- [ Wide Application ] --- Widely applied to RF signal detection, signal power measurement, environmental field strength detection, and can also be used as an integral part of automatic gain control and automatic level control
- [ Precise Design ] --- SPI interface is easy to connect with arno and single chip microcomputer with 2.54mm pitch pins
- See more on Amazon...
Brand: Qiilu | Manufacturer: Qiilu
See On Amazon #18
AD8361 RF Detector RF Microwave Real Power Detector AM Amplitude Modulation Bug Detection Module
Asin: B0785NVN1H | Model: AD8361 | PartNumber: AD8361 | Ean: 0663862491418 | UPC: 663862491418
The Operating Frequency Range Is 10Khz-2500Mhz.
The Rf Connector Of This Rf Detector Board Is Standard Sma Female.
Application Scope: Power Meter, Level Tester, Power Sampling, Test And Debugging.
The Rf Signal Is Converted Into A Voltage Output. Rf Signal Corresponding To The Amplitude Or Power Of The Output Voltage.
Features
- Adopts high quality circuit board, stable and reliable
- The RF signal is converted into a voltage output. RF signal corresponding to the amplitude or power of the output voltage
- The operating frequency range is 10KHZ-2500MHZ
- Application scope: power meter, level tester, power sampling, test and debugging
- The RF connector of this RF detector board is standard SMA female
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 Pounds
See On Amazon #19
Garosa Logarithmic Detector 0.1-2.5GHz AD8313 Amplifiers Log Output Power Meter Controller Measurement Power Meter for Detection
Asin: B08KS1L4FX | Model: AD8313 | PartNumber: AD8313
This Power Meter Is Designed With For Adi's Ad8313 Chip And Used For Rf Power Detection.Detection Frequency Range Is 0.1-2.5Ghz, And Can Convert This Rf Into Dc Voltage Output.
If You Have Any Questions About The Product Or Are Not Satisfied With The Product, Please Feel To Contact Us And We Will Provide You With The Best Solution..
Widely Applied To Rf Detection, Power Measurement, Environmental Field Strength Detection.
The Greater The Rf Amplitude Or Power, The Higher The Output Voltage, And The Output Voltage Is Proportional To The Logarithm Of The Input Amplitude, Which Expands The Dynamic Range Of The Detected.
Features
- This logarithmic detector can withstand high and low temperatures, stable and durable for a long service life
- The greater the RF amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input amplitude, which expands the dynamic range of the detected
- This power meter is designed with for ADI's AD8313 chip and used for RF power detection.Detection frequency range is 0.1-2.5GHz, and can convert this RF into DC voltage output
- Widely applied to RF detection, power measurement, environmental field strength detection
- If you have any questions about the product or are not satisfied with the product, please feel to contact us and we will provide you with the best solution.
- See more on Amazon...
Brand: Garosa | Manufacturer: Garosa
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 pounds
See On Amazon
Looking For Something Else?
Search