Shorpioen 10-Pack 1/4 x 3 1/4 Phillips Flat Concrete Screw No Drill Bit Blue Perma Seal BC-1452CNPF
Asin: B07YSV7JJ9 | Model: BC-1452CNPF- 10 | PartNumber: BC-1452CNPF- 10
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Some Applications Include Anchoring The Following To Masonry: Electrical Junction Boxes, Wooden Beams, Plywood, Exterior Insulation, Metal Flashing, Thresholds..
Special Carbide Bits Are Recommended For Driving Concrete Screws Into Masonry. Not Included.
The Ruspert Finish Is A Ceramic Coating That Also Allows These Fasteners To Be Used In Pressure-Treated Lumber..
Cuts Its Own Threads And When Used In Concrete, Block Or Brick. Eliminates The Need For An Anchor When Used In Light Or Medium-Duty Applications. When Used In Concrete, It Can Be Removed And Re-Driven Into The Same Hole..
Features
- An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point.
- Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole.
- Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds.
- The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber.
- Special carbide bits are recommended for driving concrete screws into masonry. Not Included
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon Similar To Shorpioen 10Pack 1 4 x
#1
Shorpioen 10-Pack 1/4-20 x 4-1/2 Carriage Bolt 18 8 Stainless Steel Fully Threaded BC-1472C188
Asin: B07MTQDVHM | Model: BC-1472C188 | PartNumber: BC-1472C188
18-8 Stainless Steel Carriage Bolts Are Made From One Of The Following Austenitic Alloys: 302 Hq, 303, 303Se, 304, And Xm7, All Of Which Are Characterized As Having A Chromium Content Of 17-19% And Nickel Content Of 8-10%..
The Same Design Advantages As A Low Carbon Carriage Bolt But For Use In Environments Requiring General Atmospheric Corrosion Resistance..
Features
- Round head bolt with a square neck under the head, and a unified thread pitch, made from austenitic alloy stainless steel.
- The same design advantages as a low carbon carriage bolt but for use in environments requiring general atmospheric corrosion resistance.
- 18-8 stainless steel carriage bolts are made from one of the following austenitic alloys: 302 HQ, 303, 303Se, 304, and XM7, all of which are characterized as having a chromium content of 17-19% and nickel content of 8-10%.
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 0.40 Pounds
See On Amazon #2
Shorpioen 10-Pack 1/4 x 3-1/4 Flat Phillips Concrete Screw Trim Head White BC-1452CNPFRW
Asin: B07PDSVNYV | Model: BC-1452CNPFRW-10 | PartNumber: BC-1452CNPFRW-10
Some Applications Include Anchoring The Following To Masonry: Impact Windows, Windows, Electrical Junction Boxes, Wooden Beams, Plywood, Exterior Insulation, Metal Flashing, Thresholds. The Ruspert Finish Is A Ceramic Coating That Also Allows These Fasteners To Be Used In Pressure-Treated Lumber. Hole Should Be Of A Depth Equal To The Required Embedment Plus 1/2”.
Check The Item Description To See If A Drill Is Included As Well..
Concrete Screws Should Be Installed A Minimum Of Ten Inch Apart Between Each Other. They Have An Advantage Over Most Other Types Of Masonry Anchors In That They Can Be Installed Close To The Edge Of The Material In Which They Are Installed..
An Externally Threaded, Hardened Screw With A Double Lead, Consisting Of Alternating Raised And Lowered Threads With Notches Cut Into The Raised Threads, And A Gimlet-Shaped, Nail-Type Point. Cuts Its Own Threads When Used In Concrete, Block Or Brick. Eliminates The Need For An Anchor When Used In Light Or Medium-Duty Applications. When Used In Concrete, It Can Be Removed And Re-Driven Into The Same Hole. Special Carbide Bits Are Recommended For Driving Concrete Screws Into Masonry..
Features
- Florida Standard. The gimlet point allows for superior penetrating into hard materials. Great for anchoring items to concrete, brick, block, wood or other masonry materials. White ceramic coating exceeds 500/hrs salt spray resistance
- An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a gimlet-shaped, nail-type point. Cuts its own threads when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry.
- Some applications include anchoring the following to masonry: impact windows, windows, electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2
- Concrete screws should be installed a minimum of ten inch apart between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of the material in which they are installed.
- Check the Item Description to see if a drill is included as well.
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #3
Shorpioen 10-Pack 1/4 x 1 1/4 Slotted Hex Washer Concrete Screw Blue No Drill Bit BC-1420CNSW
Asin: B07L5XT788 | Model: BC-1420CNSW-10 | PartNumber: BC-1420CNSW-10
Some Applications Include Anchoring The Following To Masonry: Electrical Junction Boxes, Wooden Beams, Plywood, Exterior Insulation, Metal Flashing, Thresholds. The Ruspert Finish Is A Ceramic Coating That Also Allows These Fasteners To Be Used In Pressure-Treated Lumber. Hole Should Be Of A Depth Equal To The Required Embedment Plus 1/2”.
Concrete Screws Should Be Installed A Minimum Of Ten Inch Apart Between Each Other. They Have An Advantage Over Most Other Types Of Masonry Anchors In That They Can Be Installed Close To The Edge Of The Material In Which They Are Installed..
Check The Item Description To See If A Drill Is Included As Well..
The Ruspert Finish Is A Ceramic Coating That Also Allows These Fasteners To Be Used In Pressure-Treated Lumber. Check The Item Description To See If A Drill Is Included As Well..
An Externally Threaded, Hardened Screw With A Double Lead, Consisting Of Alternating Raised And Lowered Threads With Notches Cut Into The Raised Threads, And A Diamond-Shaped, Nail-Type Point. Cuts Its Own Threads And When Used In Concrete, Block Or Brick. Eliminates The Need For An Anchor When Used In Light Or Medium-Duty Applications. When Used In Concrete, It Can Be Removed And Re-Driven Into The Same Hole. Special Carbide Bits Are Recommended For Driving Concrete Screws Into Masonry..
Features
- Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance
- An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry.
- Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2
- The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well.
- Concrete screws should be installed a minimum of ten inch apart between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of the material in which they are installed.
- Check the Item Description to see if a drill is included as well.
- See more on Amazon...
Brand: Shorpioen | Manufacturer: Shorpioen LLC
See On Amazon #4
Shorpioen 10-Pack 1/4-20 x 1 Hex Cap Screw 18-8 Stainless Steel BC-3124CH188
Asin: B07N6JTNGB | Model: BC-1416CH188-10 | PartNumber: BC-1416CH188-10
Brand: Shorpioen | Manufacturer: Shorpioen LLC
Weight: 0.18 Pounds
See On Amazon
Looking For Something Else?
Search