uxcell 1" x 30" 600 Grit Sanding Belt Aluminum Oxide Sandpaper Belts for Portable Strip Sander Wood Finishing Metal Drywall Polishing Sharpening Abrasive Paper 5pcs
Asin: B07ZVRXY98
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Compact Interface】The Interface Of Sander Belt Is Tight And Compact,So It Is Not Easy To Break Apart In Use,Easy To Use, Long Usage Life.
【Pay Attention To】When Installing, It Is Necessary To Distinguish The Positive And Negative Directions.Installation According To The Installation Direction On The Back Of Abrasive Belt. Installing The Opposite Direction Will Cause Problems Such As Non-Wear Resistance, Band Breakage And So On.
【Widely Application】Abrasive Sand Belt Use For Surface Smoothing, Removing Smaller Imperfections And Marks On Wood, Plastic, Fiberglass, And Both Ferrous Metal (Steel, Stainless Steel, Cast Iron, Carbon Steel) And Non-Ferrous Metals (Aluminum, Titanium, Brass, Bronze, Copper).
【Aluminum Oxide Abrasive Materials】Sand Belt Sandpaper Is With Aluminum Oxide Abrasive Materials,Sharp And Durable,Strong Grinding.
Features
- 1-inch x 30-inch & 600 Grit Abrasive sanding belt fits any sander that uses 1-inch x 30-inch sanding belt,600 Grit
- Aluminum Oxide Abrasive Materials Sand belt sandpaper is with aluminum oxide abrasive materials,sharp and durable,strong grinding
- Compact Interface The interface of sander belt is tight and compact,so it is not easy to break apart in use,easy to use, long usage life
- Widely Application Abrasive sand belt use for surface smoothing, removing smaller imperfections and marks on wood, plastic, fiberglass, and both ferrous metal (steel, stainless steel, cast iron, carbon steel) and non-ferrous metals (aluminum, titanium, brass, bronze, copper)
- Pay Attention To When installing, it is necessary to distinguish the positive and negative directions.Installation according to the installation direction on the back of abrasive belt. Installing the opposite direction will cause problems such as non-wear resistance, band breakage and so on
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 1 x 30 600
#1
uxcell Dual Rows 4 Positions 600V 45A Cable Barrier Block Terminal Strip TB-4504L
Asin: B07DM83GZ5 | Model: a18041200ux0099 | PartNumber: a18041200ux0099
Volume -Small, Good Electrical Conductivity, The Shape Of The Screw Hole Closed Guide, Not Only Can Conveniently Operate But Also Prevents The Screw From Falling Out..
Package Content: 1 X 600V 45A 4 Position Double Row Barrier Block Terminal..
Used For Wires Connecting Of Home Appliances, Electronic Circuits, Machines, Etc..
Removable Clear Plastic Insulating Cover Prevents Accidental Contact The Terminals..
Features
- Rated Value: 600V 45A; Poles: 4 Position, Dual Row; Terminal Quantity: 8.
- Removable clear plastic insulating cover prevents accidental contact the terminals.
- Volume -small, good electrical conductivity, the shape of the screw hole closed guide, not only can conveniently operate but also prevents the screw from falling out.
- Used for wires connecting of home appliances, electronic circuits, machines, etc.
- Package Content: 1 x 600V 45A 4 Position Double Row Barrier Block Terminal.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.91 x 3.39 x 1.46 inches
See On Amazon #2
uxcell AC 600V 30A 2 Terminal Panel Mounting 10 x 38mm Fuse Holder Socket
Asin: B01DO2LBIA | Model: US-SA-AJD-171822 | PartNumber: US-SA-AJD-171822 | Ean: 0602451179863 | UPC: 602451179863
Color : Black, Silver Tone;Size : 65 X 45 X 29Mm / 2.6" X 1.8" X 1.1" (L*W*T).
Net Weight : 26G;Package Content : 1 X Panel Mount Fuse Holder.
Mount Hole Dia : 4Mm / 0.16";Mount Hole Center Distance : 33Mm / 1.3".
Material : Plastic,Metal;Rated Voltage : Ac 600V 30A.
Features
- Product Name : Panel Mounted Fuse Holder;Model : R3-18;Fit For : 10 x 38mm Fuses(Not Include)
- Material : Plastic,Metal;Rated Voltage : AC 600V 30A
- Color : Black, Silver Tone;Size : 65 x 45 x 29mm / 2.6 x 1.8 x 1.1 (L*W*T)
- Mount Hole Dia : 4mm / 0.16;Mount Hole Center Distance : 33mm / 1.3
- Net Weight : 26g;Package Content : 1 x Panel Mount Fuse Holder
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Carbide Hole Saw Drill Bit, 58mm Hole Cutter for Stainless Steel Alloy Cast Iron Copper Metal Sheet, with Limit Step
Asin: B07FM7W892 | Model: a18061100ux0426 | PartNumber: a18061100ux0426 | Ean: 0714998139474 | UPC: 714998139474
All In One: Drill Bit, Spring, Wrench Are Included, No Need To Buy Any Extra Accessories For The Drilling Works. The Special Hole Design Is Conducive To Small Chip Resistance And More Convenient Operation. It Adopts Thickened And Sharp Tungsten Carbide Teeth..
Warm Tips: Keep The Drill Running Evenly At A Low Speed Or Pre-Drill The Center Hole For Extending Hole Cutter Life. Please Add Coolant Or Water When Working On Stainless Steel And Steel Metal Sheets Above 5Mm.
Features: Large Chip Removal On Both Sides, Low Resistance, High Speed, And Higher Drilling Efficiency. High-Strength Carbon Steel, Surface Blasting And Anti-Rust. Used On Hand Held Drill, Bench Drills, Magnetic Drills, Pneumatic Drills And Other Rotating Machines..
Wide Applications: Carbide Hole Saw Provides Fast And Precise Cuts Into Stainless Steel, Alloy, Aluminum, Cast Iron, And Other Metals Up To 5Mm, Also Suitable For Opening Holes In Plastic, Wood, Plywood, Cardboard, Round Or Square Pipes, Equipment Cabinet, Spherical Door Locks..
Features
- Specifications: Cutting dia.: 58mm / 2.28"; shank size: 10mm / 0.39"; cutting depth: 25mm / 0.98"; overall length: 104mm / 4.09"; non-slip triangular shank. Carbide hole cutter is with longer life than normal metal cutting hole cutters
- Wide Applications: Carbide hole saw provides fast and precise cuts into stainless steel, alloy, aluminum, cast iron, and other metals up to 5mm, also suitable for opening holes in plastic, wood, plywood, cardboard, round or square pipes, equipment cabinet, spherical door locks.
- All In One: Drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works. The special hole design is conducive to small chip resistance and more convenient operation. It adopts thickened and sharp tungsten carbide teeth.
- Features: Large chip removal on both sides, low resistance, high speed, and higher drilling efficiency. High-strength carbon steel, surface blasting and anti-rust. Used on hand held drill, bench drills, magnetic drills, pneumatic drills and other rotating machines.
- Warm Tips: Keep the drill running evenly at a low speed or pre-drill the center hole for extending hole cutter life. Please add coolant or water when working on stainless steel and steel metal sheets above 5mm
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 2.76 x 4.33 x 3.15 inches
See On Amazon #4
uxcell Insulation Braid Sleeving, 16.4Ft-1mm High Temp Fiberglass Sleeve White
Asin: B082S32TNG | Model: a19101800ux0222 | PartNumber: a19101800ux0222
[Made] This Product Is Made Of Alkali-Free Fiberglass. Then Coated With A Small Amount Of Binder. Lastly, Process The Pipe Under A High Temperature..
[Note] Electrical Wires Should Never Be Hot. Should Increase The Gauge Of Wire If You Are Exceeding The Recommended Load Of That Wire. This Product Would Make The Wire Get Hot By Not Letting It Cool And Might Melt The Insulation On Said Wire..
[Application] The Heat Shield Tubing Is Mainly Applied To Insulate And Heat Equipment, Such As Motor, Engine, Plug Wire, Fuel Lines, Decorative Light, Etc..
[Feature] This Heat Sleeve Fiberglass Are For High Temperature Applications, Also, It Keeps Wire Neat And Organized..
Features
- [PARAMETER] Material: Alkali-free Fiberglass; Length: 5 Meter / 16.4 Feet; Inner Diameter: 1mm; Thickness: 0.18mm; Working Temp Range: 30 +600 ; Working Voltage: 500V 800V; Flame Resistance: VW-1.
- [FEATURE] This heat sleeve fiberglass are for high temperature applications, also, it keeps wire neat and organized.
- [MADE] This product is made of alkali-free fiberglass. Then coated with a small amount of binder. Lastly, process the pipe under a high temperature.
- [APPLICATION] The heat shield tubing is mainly applied to insulate and heat equipment, such as motor, engine, plug wire, fuel lines, decorative light, etc.
- [NOTE] Electrical wires should never be hot. Should increase the gauge of wire if you are exceeding the recommended load of that wire. This product would make the wire get hot by not letting it cool and might melt the insulation on said wire.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell FFC FPC Cable 0.5mm Pitch 51 Pin 600mm Flexible Flat Ribbon Cable for LCD Screen
Asin: B09C2FWQ1W | Model: a21033100ux0299 | PartNumber: a21033100ux0299
[Structure]: The Cable Usually Consists Of A Flat And Flexible Plastic Film Base, With Multiple Metallic Conductors Bonded To One Surface..
[Advantage]: The Term Ffc(Flexible Flat Cable) Usually Refer To The Extremely Thin Flat Cable Often Found In High Density Electronic Applications..
[Feature]: The Each End Cable Is Reinforced With A Pin Protector To Make Insertion Easier..
[Application]: Applying To Various Of The Lcd Screen, Such As Digital Cameras, Digital Camcorders, Laptops, Lcd Tvs, Lcd Monitors, Etc...
Features
- [SPECIFICATION]: 51 pin 0.5mm pitch; Total Length: 600 mm / 23.62 inch; A type (Pin on the Same Side).
- [APPLICATION]: Applying to various of the LCD screen, such as digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, etc..
- [STRUCTURE]: The cable usually consists of a flat and flexible plastic film base, with multiple metallic conductors bonded to one surface.
- [FEATURE]: The each end cable is reinforced with a pin protector to make insertion easier.
- [ADVANTAGE]: The term FFC(Flexible Flat Cable) usually refer to the extremely thin flat cable often found in high density electronic applications.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Insulation Braid Sleeving, 9.8Ft-6mm High Temp Fiberglass Sleeve White
Asin: B082YJFZVQ | Model: a19101800ux0242 | PartNumber: a19101800ux0242
[Made] This Product Is Made Of Alkali-Free Fiberglass. Then Coated With A Small Amount Of Binder. Lastly, Process The Pipe Under A High Temperature..
[Note] Electrical Wires Should Never Be Hot. Should Increase The Gauge Of Wire If You Are Exceeding The Recommended Load Of That Wire. This Product Would Make The Wire Get Hot By Not Letting It Cool And Might Melt The Insulation On Said Wire..
[Application] The Heat Shield Tubing Is Mainly Applied To Insulate And Heat Equipment, Such As Motor, Engine, Plug Wire, Fuel Lines, Decorative Light, Etc..
[Feature] This Heat Sleeve Fiberglass Are For High Temperature Applications, Also, It Keeps Wire Neat And Organized..
Features
- [PARAMETER] Material: Alkali-free Fiberglass; Length: 3.0 Meter / 9.8 Feet; Inner Diameter: 6mm; Thickness: 0.3mm; Working Temp Range: 30 +600 ; Working Voltage: 500V 800V; Flame Resistance: VW-1.
- [FEATURE] This heat sleeve fiberglass are for high temperature applications, also, it keeps wire neat and organized.
- [MADE] This product is made of alkali-free fiberglass. Then coated with a small amount of binder. Lastly, process the pipe under a high temperature.
- [APPLICATION] The heat shield tubing is mainly applied to insulate and heat equipment, such as motor, engine, plug wire, fuel lines, decorative light, etc.
- [NOTE] Electrical wires should never be hot. Should increase the gauge of wire if you are exceeding the recommended load of that wire. This product would make the wire get hot by not letting it cool and might melt the insulation on said wire.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell Insulation Braid Sleeving, 33Ft-2mm High Temp Fiberglass Sleeve White
Asin: B082S2D9ML | Model: a19101800ux0229 | PartNumber: a19101800ux0229
[Made] This Product Is Made Of Alkali-Free Fiberglass. Then Coated With A Small Amount Of Binder. Lastly, Process The Pipe Under A High Temperature..
[Note] Electrical Wires Should Never Be Hot. Should Increase The Gauge Of Wire If You Are Exceeding The Recommended Load Of That Wire. This Product Would Make The Wire Get Hot By Not Letting It Cool And Might Melt The Insulation On Said Wire..
[Application] The Heat Shield Tubing Is Mainly Applied To Insulate And Heat Equipment, Such As Motor, Engine, Plug Wire, Fuel Lines, Decorative Light, Etc..
[Feature] This Heat Sleeve Fiberglass Are For High Temperature Applications, Also, It Keeps Wire Neat And Organized..
Features
- [PARAMETER] Material: Alkali-free Fiberglass; Length: 10 Meter / 33 Feet; Inner Diameter: 2mm; Thickness: 0.18mm; Working Temp Range: 30 +600 ; Working Voltage: 500V 800V; Flame Resistance: VW-1.
- [FEATURE] This heat sleeve fiberglass are for high temperature applications, also, it keeps wire neat and organized.
- [MADE] This product is made of alkali-free fiberglass. Then coated with a small amount of binder. Lastly, process the pipe under a high temperature.
- [APPLICATION] The heat shield tubing is mainly applied to insulate and heat equipment, such as motor, engine, plug wire, fuel lines, decorative light, etc.
- [NOTE] Electrical wires should never be hot. Should increase the gauge of wire if you are exceeding the recommended load of that wire. This product would make the wire get hot by not letting it cool and might melt the insulation on said wire.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 0.5 Micron Paint Filter Bag PE Strainer for Filtering Paint, Gasoline, Fuel, Home Brewing (7.09"x7.09"x16.93")
Asin: B0B3RBC9J3 | Model: a22011900ux0614 | PartNumber: a22011900ux0614
[Great Helper]: The Paint Strainer Bags Easily Remove Unwanted Dust And Undissolved Particles, Resulting In A Filtered Product Free Of Any Particles, Debris Or Solids..
[Notice]:Select The Right Micron Rating Strainer For Your Application Depends On The Type Of Item You Want To Screen. Please Note That The Filtering Performance May Change Due To Environment Conditions(Eg. Temperature, Ph Value, Squeeze Ect.).
[Wide Application]: Paint Filter Bags Are Suitable For Filtering Paint, Adhesives, Varnishes, Pigment, Ink, And Various Liquids, Widely Used In The Construction Industry, Bioengineering, Electroplating, Electronic Engineering, Etc..
[Durable For Use]: The Paint Filter Bag Is Made Of Nylon, Which Is Wear-Resistant, High Temperature Resistant And Reusable..
Features
- [Size]: Hole Size: 0.5 m(25000 Mesh), Total Length: 18cm/7.09 inch, Outer Diameter: 18cm/7.09 inch, Height: 43cm/16.93 inch
- [Durable for Use]: The paint filter bag is made of nylon, which is wear-resistant, high temperature resistant and reusable.
- [Great Helper]: The paint strainer bags easily remove unwanted dust and undissolved particles, resulting in a filtered product free of any particles, debris or solids.
- [Wide Application]: Paint filter bags are suitable for filtering paint, adhesives, varnishes, pigment, ink, and various liquids, widely used in the construction industry, bioengineering, electroplating, electronic engineering, etc.
- [Notice]:Select the right micron rating strainer for your application depends on the type of item you want to screen. Please note that the filtering performance may change due to environment conditions(eg. temperature, PH value, squeeze ect.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Silicone O-Ring, 6mm OD, 4mm ID, 1mm Width, VMQ Seal Rings Gasket, Red, Pack of 10
Asin: B08F1XJCK3 | Model: a19111100ux0419 | PartNumber: a19111100ux0419
[Vmq] - Standard Silicone With A Wide Temperature Range From -22℉ (-30℃) To 392℉ (200℃).
[Application] - Widely Used For Hydraulics And Pneumatics Sealing, Pressure Valve, Gas Compressor, Reaction Valve, Heat Exchanger, Boiler, Filter, Mechanical.
[Application] - Can Be Used For Travel Mug Cup Lids, Espresso Coffee Maker And Weldless Fitting For Brewing.
[Hardness] - 50 Durometer (Shore Hardness) For Resistance To Penetration.
Features
- [Size] - 6mm Outside Diameter, 4mm Inner Diameter, 1mm Cross-Section Diameter
- [Hardness] - 50 Durometer (Shore Hardness) for resistance to penetration
- [VMQ] - Standard silicone with a wide temperature range from -22 (-30 ) to 392 (200 )
- [Application] - Can be used for travel mug cup lids, espresso coffee maker and weldless fitting for brewing
- [Application] - Widely used for Hydraulics and Pneumatics sealing, pressure valve, gas compressor, reaction valve, heat exchanger, boiler, filter, mechanical
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Insulation Braid Sleeving, 3.3Ft-10mm High Temp Fiberglass Sleeve White
Asin: B082K9S7BS | Model: a19101800ux0253 | PartNumber: a19101800ux0253
[Made] This Product Is Made Of Alkali-Free Fiberglass. Then Coated With A Small Amount Of Binder. Lastly, Process The Pipe Under A High Temperature..
[Note] Electrical Wires Should Never Be Hot. Should Increase The Gauge Of Wire If You Are Exceeding The Recommended Load Of That Wire. This Product Would Make The Wire Get Hot By Not Letting It Cool And Might Melt The Insulation On Said Wire..
[Application] The Heat Shield Tubing Is Mainly Applied To Insulate And Heat Equipment, Such As Motor, Engine, Plug Wire, Fuel Lines, Decorative Light, Etc..
[Feature] This Heat Sleeve Fiberglass Are For High Temperature Applications, Also, It Keeps Wire Neat And Organized..
Features
- [PARAMETER] Material: Alkali-free Fiberglass; Length: 1 Meter / 3.3 Feet; Inner Diameter: 10mm; Thickness: 0.35mm; Working Temp Range: 30 +600 ; Working Voltage: 500V 800V; Flame Resistance: VW-1.
- [FEATURE] This heat sleeve fiberglass are for high temperature applications, also, it keeps wire neat and organized.
- [MADE] This product is made of alkali-free fiberglass. Then coated with a small amount of binder. Lastly, process the pipe under a high temperature.
- [APPLICATION] The heat shield tubing is mainly applied to insulate and heat equipment, such as motor, engine, plug wire, fuel lines, decorative light, etc.
- [NOTE] Electrical wires should never be hot. Should increase the gauge of wire if you are exceeding the recommended load of that wire. This product would make the wire get hot by not letting it cool and might melt the insulation on said wire.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search