Shars 11/2" x 3/8''-16 Adjustable Self Positioning Hold Down Clamp 202-4838 ^]
Asin: B07ZWMZMNB
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Stud Size: 3/8-16.
Load Capacity Lbs: 11000.
Product Width: 1.70.
T-Slot Size: 1/2.
Features
- Overall Length: 4.60
- T-Slot Size: 1/2
- Stud Size: 3/8-16
- Product Width: 1.70
- Load Capacity Lbs: 11000
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 2.94 pounds
See On Amazon Similar To Shars 11 2 x 3
#1
Shars 0.008" Large Face Dial Test Indicator, 0001" Graduation, 1.5" Face Diameter 303-3210 P]
Asin: B082MSSNDN
Graduation: 0..0001".
Product Included: 2 Dovetail Clamps 3/8" & 5/32"; Fitted Case.
Dial Reading: 0-4-0.
Measuring Range: 0.008".
Features
- SKU# 303-3210
- Measuring Range: 0.008
- Graduation: 0..0001
- Dial Reading: 0-4-0
- Product Included: 2 dovetail clamps 3/8 & 5/32; Fitted case
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 0.31 pounds
See On Amazon #2
Tegara CAT40 3/16 in x 3.0 in. End Mill Tool Holder 2 pcs 202-7115G-2 P[
Asin: B07WXK87NC
Nose Diameter: 0.875".
Tir (In): 0.0001, Max Rpm Balanced To: G2.5 20,000.
Drawbar Thread Size: 5/8X11 Unc.
Projection Length: 3.0".
Features
- Bore Diameter: 3/16"
- Projection Length: 3.0
- Nose Diameter: 0.875
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
- See more on Amazon...
Brand: Tegara | Manufacturer: Shars Tool
Weight: 6.00 pounds
See On Amazon #3
Shars 7/16" T-Slots Nut, 3/8"-16 Thread 5Pcs Set 202-4814 (5) ![
Asin: B09SVM817Y | Ean: 0000220248145 | UPC: 000220248145
Slot Width T: 7/16"; Slot Height H: 7/32".
Material: Steel; Thread Hole Type: Blind Tapped.
Overall Height H: 1/2"; Base Width W: 11/16".
Thread Size: 3/8-16.
Features
- SKU# 202-4814
- Thread Size: 3/8-16
- Slot Width T: 7/16; Slot Height h: 7/32
- Overall Height H: 1/2; Base Width W: 11/16
- Material: Steel; Thread Hole Type: Blind Tapped
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 0.62 pounds
See On Amazon #4
SHARS 1/8" - 7/8" by 16TH 13 Piece Precision R8 Collet Set 202-5134 S[
Asin: B081K98K5N | Model: 202-5134 | PartNumber: 202-5134
Drawbar Thread Size: 7/16X20unf.
Number Of Pieces: 13.
Size: 3/16", 5/16", 7/16", 9/16", 11/16", 1/2", 5/8", 3/4", 1/8", 1/4", 3/8", 13/16", 7/8".
Collet Size Range: 1/8-7/8 By 16Ths.
Features
- COLLET SERIES: R8
- COLLET SIZE RANGE: 1/8-7/8 By 16ths
- DRAWBAR THREAD SIZE: 7/16x20UNF
- Size: 3/16, 5/16, 7/16, 9/16, 11/16, 1/2, 5/8, 3/4, 1/8, 1/4, 3/8, 13/16, 7/8
- NUMBER OF PIECES: 13
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #5
Shars 1-2-3 Precision Matched .0002" Pair Blocks w/11 Holes Set 303-5503 P]
Asin: B08R111KYQ | Model: 303-5503 | PartNumber: 303-5503 | Ean: 0000030355033 | UPC: 000030355033
Precision Ground And Hardened On All Sides..
Hardness 56 To 60 Rc.
Ideal For Mounting Work For Precision, Grinding And Layout..
Tapped Hole Size: (5) 5/16"-18Unc.
Features
- Squareness: 0.0003"
- Tapped Hole Size: (5) 5/16-18UNC
- Precision ground and hardened on all sides.
- Ideal for mounting work for precision, grinding and layout.
- Hardness 56 to 60 RC
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #6
Shars 1/2-1" 4 Flute Tin Coated Single End Center Cut End Mill Set 5PCS 404-5865 S
Asin: B09JZZ564T | Ean: 0000440458652 | UPC: 000440458652
Brand: Shars | Manufacturer: Shars
See On Amazon #7
SHARS 11/16" Retrofit GTN Cut-Off and Grooving Blade BXA 202-9577 P]
Asin: B087YW57MZ | Model: 202-9577 | PartNumber: 202-9577 | Ean: 0000120295775 | UPC: 000120295775
Overall Length: 4.34".
Blade Height: 11/16".
Insert Size : 3.
Insert Width: 0.120".
Features
- Fits BXA Series Holder #7
- Insert Width: 0.120
- Overall Length: 4.34
- Insert Size : 3
- Blade Height: 11/16
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 0.13 pounds
See On Amazon #8
Tegara CAT40 1/8 in x 3.0 in. Taper End Mill Tool Holder 2 pcs 202-7434-2 P[
Asin: B07WXJ1F7C
Nose Diameter: 0.72".
Tir (In): 0.0001, Max Rpm Balanced To: G2.5 20,000.
Drawbar Thread Size: 5/8X11 Unc.
Projection Length: 3.0".
Features
- Bore Diameter: 1/8"
- Projection Length: 3.0
- Nose Diameter: 0.72
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
- See more on Amazon...
Brand: Tegara | Manufacturer: Shars Tool
Weight: 8.00 pounds
See On Amazon #9
Shars 7/16" x 3/8" HSS 4 Flute Single End Center Cut End Mill, 1" Flute Length 404-6026 !)
Asin: B0821V4DXR
Spiral Flute Design Offers A Fast And Smoother Cutting Action.
4 Flutes; Single End; Center Cutting; 30-Degree Helix Angle.
Cutting Diameter: 7/16"; Shank Diameter: 3/8"; Flute Length: 1"; Overall Length: 2-11/16".
Have Standard Lengths And Sized To Offer Good Rigidity.
Features
- Right hand (clockwise rotation) cutting direction
- Have standard lengths and sized to offer good rigidity
- Spiral flute design offers a fast and smoother cutting action
- Cutting Diameter: 7/16; Shank Diameter: 3/8; Flute Length: 1; Overall Length: 2-11/16
- 4 Flutes; Single End; Center Cutting; 30-degree Helix Angle
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
See On Amazon #10
Aventor 12"/300mm IP67 Single Hook Electronic Digital Depth Gage 303-1787 R]
Asin: B0874CYG1V | Ean: 0000130317870 | UPC: 000130317870
Accuracy (Tolerance Range): ±0.0015" / 0.03Mm; Lcd Display Size: 29.4Mm X 10.4Mm (11Mm Digit Height).
Product Included: - Fitted Case; - Caliper User Manual; -Inspection Report With Measurement Values (Not Nist Traceable); -3V Cr2032 Lithium Battery.
Dust/Water Protection Level: Ip67; Max. Response Speed: 3.5 Meters / Sec; Length Standard: Inductive Linear Encoder.
Maximum Measuring Range: 12", 300Mm; Resolution: 0.0005"/0.01Mm; Jaw Depth: 6"; Data Output: No.
Features
- SKU# 303-1787
- MAXIMUM MEASURING RANGE: 12, 300mm; RESOLUTION: 0.0005/0.01mm; JAW DEPTH: 6; DATA OUTPUT: No
- Accuracy (Tolerance Range): 0.0015 / 0.03mm; LCD Display Size: 29.4mm x 10.4mm (11mm Digit Height)
- Dust/Water Protection Level: IP67; Max. Response Speed: 3.5 meters / sec; Length standard: Inductive linear encoder
- Product Included: - Fitted Case; - Caliper user manual; -Inspection report with measurement values (Not NIST Traceable); -3V CR2032 Lithium battery
- See more on Amazon...
Brand: Aventor | Manufacturer: Shars
Weight: 5.00 pounds
See On Amazon #11
Shars 2PCS 1/8 x 11/16 x 5" HSS P Type Cut-Off Blade 404-1668(2) !)
Asin: B0C4BK5Q8M | Ean: 0000441416682 | UPC: 000441416682
Material: High Speed Steel.
Blade Dimension: 1/8" W X 11/16" H X 5" L.
For Cut-Off Operations.
M2 High Speed Steel A Fine General Purpose Ground Tool Bits Show Exceptional Result On Mild Steel, Alloys And Tool Steels. This Tool Bit Makes A Superior Finishing Tool.
Features
- SKU# 404-1668(2)
- M2 High speed steel A fine general purpose Ground tool bits show exceptional result on mild steel, alloys and tool steels. This tool bit makes a superior finishing tool
- Material: High Speed Steel
- For Cut-off Operations
- Blade Dimension: 1/8 W x 11/16 H x 5 L
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 0.19 pounds
See On Amazon #12
Tegara CAT40 3/8 in x 3.0 in. End Mill Tool Holder 2 pcs 202-7121G-2 P[
Asin: B07WXKCYSB | Model: 202-7121G-2 | PartNumber: 202-7121G-2
Nose Diameter: 1.06".
Tir (In): 0.0001, Max Rpm Balanced To: G2.5 20,000.
Drawbar Thread Size: 5/8X11 Unc.
Projection Length: 3.0".
Features
- Bore Diameter: 3/8"
- Projection Length: 3.0
- Nose Diameter: 1.06
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
- See more on Amazon...
Brand: Tegara | Manufacturer: Shars Tool
Weight: 6.00 pounds
See On Amazon #13
Shars 8" Fully Machined Threaded Back Plate 2-1/4-8 for 3 or 4 Jaw Self Center Chuck 202-6202 R
Asin: B0847SLYCG
Shoulder Diameter: D1=6.54".
Flange Thickness: B=0.68''.
Bolt Circle Diameter: D2=7.087".
Mounting Thread Size: T=2-1/4 X 8 Tpi.
Features
- Back plate would need to be machined in order to fit the lathe chuck
- Mounting Thread Size: T=2-1/4 x 8 TPI
- Shoulder Diameter: D1=6.54
- Bolt Circle Diameter: D2=7.087
- Flange Thickness: B=0.68''
- See more on Amazon...
Brand: Shars | Manufacturer: Shars
Weight: 11.00 pounds
See On Amazon #14
SHARS 40 NMTB End Mill Holder CNC 3/4 x 2.31 TIR 0.0002 NMTB40 202-5614A P[
Asin: B0845QZ3S3
Bore: 3/4".
Max Rpm Balanced To: 3000.
Drawbar Thread: 5/8"-11.
Brand: Shars | Manufacturer: Shars
Weight: 3.00 pounds
See On Amazon #15
Tegara CAT40 1/4 in x 3.0 in. End Mill Tool Holder 2 pcs 202-7437-2 M[
Asin: B07WXKWZCD
Nose Diameter: 0.875".
Tir (In): 0.0001, Max Rpm Balanced To: G2.5 20,000.
Drawbar Thread Size: 5/8X11 Unc.
Projection Length: 3.0".
Features
- Bore Diameter: 1/4"
- Projection Length: 3.0
- Nose Diameter: 0.875
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
- See more on Amazon...
Brand: Tegara | Manufacturer: Shars Tool
Weight: 6.00 pounds
See On Amazon #16
Tegara CAT40 1/2 in x 3.0 in. End Mill Tool Holder 2 pcs 202-7125G-2 P[
Asin: B07WWK93HQ
Nose Diameter: 1.38".
Tir (In): 0.0001, Max Rpm Balanced To: G2.5 20,000.
Drawbar Thread Size: 5/8X11 Unc.
Projection Length: 3".
Features
- Bore Diameter: 1/2"
- Projection Length: 3
- Nose Diameter: 1.38
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
- See more on Amazon...
Brand: Tegara | Manufacturer: Shars Tool
Weight: 6.00 pounds
See On Amazon #17
Tegara CAT40 1/8 in 3in. Taper Dual Contact End Mill Tool Holder 2pcs 202-7408-2 P[
Asin: B07WN61737 | Model: 202-7408-2 | PartNumber: 202-7408-2
Tir (In): 0.0001, Max Rpm Balanced To: G2.5 20,000.
Projection Length: 3.0".
Nose Diameter: 0.73".
Drawbar Thread Size: 5/8X11 Unc.
Features
- Bore Diameter: 1/8"
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
- Nose Diameter: 0.73
- Projection Length: 3.0
- See more on Amazon...
Brand: Tegara | Manufacturer: Shars Tool
Weight: 8.00 pounds
See On Amazon #18
Tegara CAT40 1/4 in 3in. Dual Contact End Mill Tool Holder 2pcs 202-7658-2 P[
Asin: B07WH3DGL7
Tir (In): 0.0001, Max Rpm Balanced To: G2.5 20,000.
Projection Length: 3.0.
Nose Diameter: 0.88".
Drawbar Thread Size: 5/8X11 Unc.
Features
- Bore Diameter: 1/4"
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
- Nose Diameter: 0.88
- Projection Length: 3.0
- See more on Amazon...
Brand: Tegara | Manufacturer: Shars Tool
Weight: 10.00 pounds
See On Amazon #19
3" Precision Boring Head + CAT40 2" OD 1-1/2"-18 Boring Head Tool Holder 202-8043+202-8017 M]
Asin: B0D325S1J4 | Model: 202-8043+202-8017 | PartNumber: 202-8043+202-8017 | Ean: 0000620280431 | UPC: 000620280431
Head Size: 3.
Drawbar Thread Size: 5/8X11 Unc.
Shank Size: Cat40.
Nose Diameter: 2.
Shank Thread Size: 1-1/2-18.
Max. Offset: 1.
Hole Size: 3/4.
Projection Length: 1.875.
Brand: Shars Tool.
Features
- MFG SKU #: 404-8043+202-8017
- Brand: Shars Tool
- Head Size: 3
- Hole Size: 3/4
- Shank Thread Size: 1-1/2-18
- Max. Offset: 1
- Shank Size: CAT40
- Nose Diameter: 2
- Projection Length: 1.875
- Drawbar Thread Size: 5/8x11 UNC
- See more on Amazon...
Brand: Shars | Manufacturer: Shars Tool
Weight: 8.00 pounds
See On Amazon
Looking For Something Else?
Search