Go Kart Clutch Bolt Kit for Predator Engines
Asin: B0826KQKXF | Ean: 0683828750786 | UPC: 683828750786
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Washers Included..
Brand: Kart Supply | Manufacturer: Bolts and nuts
See On Amazon Similar To Go Kart Clutch Bolt Kit
#1
212CC Torque Converter 6.5 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series
Asin: B07S3TX4C5 | Model: 30 Series | PartNumber: 30 Series
Ean: 0808281948024, 0606314889531, 0808281881949, 0808281535118, 0808281601646, 0808281716371, 0808281867325
UPC: 808281601646, 808281716371, 808281881949, 808281535118, 808281948024, 606314889531, 808281867325
【Bring Your Off-Road Machine To Life】This Tav2 30 Series Go Kart Clutch Kit Fits A 3/4" Shaft And Comes With Your Choice Of A 10 Tooth Sprocket For A 40/41 Chain Or A 12 Tooth Sprocket For A 35 Chain. It Will Work With Small Engines Producing 2-8Hp. 30 Series Asymmetrical Design..
【30 Series Toruqe Converter Belt For 6" Driven】 Length: 70.5Cm / 27.76", Outside Circumference: 27 23/64" , Width Is 3/4".（1.9Cm / 0.75"). Center To Center Of Driver And Driven: 6-15/16 To 7"..
【For Your Convenience This Kit Comes With】1 X 3/4" Driver Pulley;1 X 5/8" Driver Pulley; 1 X Plastic Assy Cover;1 X Aluminum Mounting Plate;1 X Drive Belt; 1 X 10 Tooth Sprocket For #40/41/420 Chain; 1 X 12 Tooth Sprocket For #35 Chain(Chain Not Included); 1 X Full Mounting Hardware..
【A Huge Improvement Over The Old Centrifugal Clutch】This Clutch Will Help You Get More Power Out Of Your Small Engine By Reducing Engine Load. A Torque Converter Acts Similar To A Transmission, Allows Higher Speeds Out Of Your Small Engine, And Smoother Acceleration. On A Lighter Buggy Or Drift Cart Or Mini-Bike This Will Smoke Your Old Centrifugal Clutch..
【Really Wakes Up The Bike】 This 3/4" Torque Converter Is A Direct Replacement Kit For The Most Popular Comet Tav2 Go-Kart Torque-Converter 30 Series. It Fits All Engines With A 3/4" Straight Crankshaft. Diy Modifications To Your Mini Bike Require Some Mechanical Ability. I'm Sure You Can Do It!.
Features
- TORQUE CONVERTER DIY MODIFICATIONS COMPATIBLE DIY Modifications fits for go karts and mini bikes and drift carts, such as BT200X, cx100, ct200u ex, Massimo Baja 200, doodlebug db30, mini-bike, rt200, manco 485, Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc. Suitable for Hisun196 engine, Predator 224 engine, Predator 212cc engine, mini bike 224cc predator engine. Note This is not made by Comet, just the modification replacements for it. Cars mentioned above not included in package.
- REALLY WAKES UP THE BIKE This 3/4 Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4 Straight Crankshaft. DIY modifications to your Mini Bike require some mechanical ability. I'm sure you can do it!
- BRING YOUR OFF-ROAD MACHINE TO LIFE This TAV2 30 Series Go Kart Clutch Kit fits a 3/4 shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design.
- A HUGE IMPROVEMENT OVER THE OLD CENTRIFUGAL CLUTCH This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. On a lighter buggy or drift cart or mini-bike this will SMOKE your old centrifugal clutch.
- 30 SERIES TORUQE CONVERTER BELT FOR 6 DRIVEN Length: 70.5cm / 27.76, Outside circumference: 27 23/64 , Width is 3/4. 1.9cm / 0.75). Center to Center of driver and driven: 6-15/16 to 7.
- FOR YOUR CONVENIENCE THIS KIT COMES WITH 1 x 3/4 Driver Pulley;1 x 5/8 Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware.
- See more on Amazon...
Brand: IPARTS EXPERT | Manufacturer: Coralov-US
Dimensions: 7.48 x 13.78 x 7.87 inches | Weight: 11.24 Pounds
See On Amazon #2
BLACKHORSE-RACING 3pcs 30 Series Go Kart Drive Belt Replaces Manco 5959 / Comet 203589
Asin: B01EBOKP0A | Ean: 6113229364168
√ Center To Center Spacing For The Driver And Driven Pulley Needs To Be Between 6 5/8 Inch And 6 11/16 Inch..
√ Good Performance:Designed For Superior,High Mileage And Reliable Performance. According To Factory Specifications,A Great Replacement Belt For The Old Or,Durability,And Fit.Tested Under Severe Environmental Conditions To Deliver Maximum Performance In Any Terrain Or Weather..
√ Width: 0.75", Length: 27-1/32" Fitment: Manco 5959 Comet 203589.
√ Material:Made Of Excellent Quality Rubber Material,It's Sturdy And Durable In Use..
Features
- The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.
- MATERIAL:Made of excellent quality rubber material,it's sturdy and durable in use.
- Center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch.
- Width: 0.75, Length: 27-1/32 Fitment: Manco 5959 Comet 203589
- GOOD PERFORMANCE:Designed for superior,high mileage and reliable performance. According to factory specifications,a great replacement belt for the old or,durability,and fit.Tested under severe environmental conditions to deliver maximum performance in any terrain or weather.
- See more on Amazon...
Brand: BLACKHORSE-RACING | Manufacturer: blackhorseracing
Dimensions: 0.04 x 27.03 x 0.75 Inches
See On Amazon #3
LotFancy Go Kart Clutch 3/4 Bore 12T for #35 Chain, Predator 212 Engine Centrifugal Clutch, with Screws Allen Wrench Clutch Bolts and Nuts Kit
Asin: B01GFFHK0G | Model: 10B-1402-X | PartNumber: 10B-1402-X | Ean: 6958104825422
Perfect For Go Kart, Minibike And Fun Kart. Fits Honda Gx160, Gx200, Gx 140, Gx120, Gc160, Gc190, Harbor Freight Greyhound 196Cc, Harbor Freight Predator 212Cc, Briggs And Stratton Tecumseh Engines And 2-6.5 Hp With 3/4” Shaft.
Go Cart Clutch Kit Includes 1 X 3/4 12 Teeth Clutch, 2 X Chain Connecting Links, 1 X Clutch Bolt And Washer Kit, 1 X Screws Set, 1 X Allen Wrench. (The Chain Is Not Included. )Saves You The Hassle Of Having To Hunt Down All The Right Parts At Your Local Hardware Store.
Also Fits Any Other Engines With 3/4 Crank Shaft And 3/16” Key Way, Most 5.5 Hp Clones, 6.5 Hp Clones And 4-7Hp Motors In All Brands.
Our Go-Kart Clutch Is Made Of High-Grade Steel, Heavy-Duty And Long Lasting. It Can Withstand The Strain And Heat Caused By Friction, Once The Clutch Engages.
Features
- Centrifugal Clutch 3/4 Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 RPM
- Our go-kart clutch is made of high-grade steel, heavy-duty and long lasting. It can withstand the strain and heat caused by friction, once the clutch engages
- Perfect for Go Kart, Minibike and Fun Kart. Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4 shaft
- Also fits any other engines with 3/4 crank shaft and 3/16 key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands
- Go cart clutch kit includes 1 x 3/4 12 Teeth Clutch, 2 x Chain Connecting Links, 1 x Clutch Bolt and Washer Kit, 1 x Screws Set, 1 x Allen Wrench. (The chain is not included. )Saves You the hassle of having to hunt down all the right parts at your local hardware store
- See more on Amazon...
Brand: LotFancy | Manufacturer: LotFancy
Dimensions: 0.50 x 4.72 x 2.36 inches
See On Amazon #4
FDJ Minibike Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain
Asin: B01D4L6OSI | Model: 3/4 Bore 40 41 Chain 10T | PartNumber: 3/4 Bore 40 41 Chain 10T | Ean: 0749110222864 | UPC: 749110222864
3 4 Inch Centrifical Clutch For Single Wheel Belt Direct Drive Karts With Tires No Larger Than 15" Tall.
Fits Go Cart Motor Auto Engine Tecumseh Clutch 6.5 Horsepower Motor With 3/4" Bar Shaft And 3/16" Key Way.
Fits 2 - 6.5Hp Small Engines Honda Gc160, Gc190, Gx120, Gx140, Gx160, Gx200.
3/4" Bore Designed For 2-7Hp 212 Predator Engines Clutch Performance Parts.
Features
- Heavy Duty 10T Sprocket for 40/41/420 Chain 212cc Predator Belt Drive Centrifugal Clutch
- 3/4 Bore Designed for 2-7Hp 212 Predator Engines Clutch Performance Parts
- 3 4 inch Centrifical Clutch for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15 Tall
- Fits 2 - 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200
- Fits Go Cart Motor Auto Engine Tecumseh Clutch 6.5 Horsepower Motor with 3/4 Bar Shaft and 3/16 Key Way
- See more on Amazon...
Brand: FDJ | Manufacturer: FDJ
Dimensions: 3.60 x 4.00 x 1.80 Inches | Weight: 2.00 Pounds
See On Amazon #5
FDJ Predator 212 Clutch 12 Tooth Mini Bike Clutch 3/4 with Screws Allen Wrench Clutch Bolts and Nuts Kit
Asin: B08L632YMB | Model: 1122TWT | PartNumber: 1122TWT | Ean: 0611040612926 | UPC: 611040612926
Mini Bike Clutch Fits Any Other Engines With 3/4 Crank Shaft And 3/16” Keyway, Most 5.5 Hp Clones, 6.5 Hp Clones And 4-7Hp Motors In All Brands.
Oem Replacement Quality: Made Of Quality Iron Material, Which Is Lightweight, Portable, Sturdy, Durable, Maximum Torque, Wear-Resisting And Fast Heat Dissipation.
Double Protection: Predator Engine Go Kart Clutch Bolt,Washer,Screws And Allen Wrench Are All Included. Mounts Onto Crankshaft Using Bolt And Washer On The End Of The Crankshaft And Using Screws Set For Double Secures Your Clutch To The Engine.
Centrifugal Clutch Fits Honda Gx160, Gx200, Gx 140, Gx120, Gc160, Gc190, Harbor Freight Greyhound 196Cc, Harbor Freight Predator 212Cc, Briggs And Stratton Tecumseh Engines 2-6.5 Hp With 3/4” Shaft.
Features
- Go Kart Clutch 3/4 Bore 12T for 35 Chain, Perfect for Go Kart, Minibike and Fun Kart Engine 3/4 Bar
- Centrifugal Clutch Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh Engines 2-6.5 HP with 3/4 shaft
- Mini Bike Clutch Fits Any Other Engines with 3/4 Crank Shaft and 3/16 Keyway, Most 5.5 HP Clones, 6.5 HP Clones and 4-7HP Motors in All Brands
- Double Protection: Predator Engine Go Kart Clutch Bolt,Washer,Screws and Allen Wrench are All Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft and Using Screws Set for Double Secures Your Clutch to the Engine
- OEM Replacement Quality: Made of Quality Iron Material, Which is Lightweight, Portable, Sturdy, Durable, Maximum Torque, Wear-resisting and Fast Heat Dissipation
- See more on Amazon...
Brand: FDJ | Manufacturer: FDJ
See On Amazon #6
3 Pack of Drive Belt for 30 Series Go Kart Torque Converter Drive Belt Replaces Manco 5959 / Comet 203589
Asin: B08K4CKRV8 | Ean: 8425553682978
【Quality Material】: This 203589-Drive Belt Made Of High-Quality Rubber Material, Durable And Sturdy And Strong Strength For Long Time Use.
【Easy To Install】: Although This Drive Belt 203785 With Easily Installation Features, Professional To Help Install Is Recommended.
【Wide Applications】: The 30 Series Torque Converter Belt Used For Most Manco American Sport Works And Ken-Bar Karts With 5Hp-7Hp Engines. And Also Used On The Comet Tav2 Bolt On Torque-A-Verter Kit.
【Specific Size】:Width: 0.75", Length: 27-1/32", Center To Center Spacing For The Driver And Driven Pulley Needs To Be Between 6 5/8 Inch And 6 11/16 Inch.
Features
- Replace Part Number : For go kart belts replace for Manco 5959 Comet 203589
- Specific Size :Width: 0.75, Length: 27-1/32, center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch
- Quality Material : This 203589-drive belt made of high-quality Rubber material, durable and sturdy and strong strength for long time use
- Wide Applications : The 30 series torque converter belt used for most Manco American Sport works and Ken-bar Karts with 5hp-7hp engines. And also used on the Comet TAV2 bolt on torque-a-verter kit
- Easy to Install : Although this drive belt 203785 with Easily installation features, professional to help install is recommended
- See more on Amazon...
Brand: CLIO | Manufacturer: GEUNTECH
Dimensions: 0.04 x 27.03 x 0.75 Inches
See On Amazon #7
YONQIFON 3 Pack of KT196 Drive Belt for 30 Series Go Kart Drive Belt Fit for Manco 5959 / Comet 203589
Asin: B0C77TYBYF
【Specific Size】:Width: 0.75", Length: 27-1/32", Center To Center Spacing For The Driver And Driven Pulley Needs To Be Between 6 5/8 Inch And 6 11/16 Inch.
【Wide Applications】: The 30 Series Torque Converter Belt Used For Most Manco American Sport Works And Ken-Bar Karts With 5Hp-7Hp Engines. And Also Used On The Comet Tav2 Bolt On Torque-A-Verter Kit.
【Replace Part Number】:Yonqifon Go-Kart Drive Belt Used On Go Kart Belts Replace For Manco 5959 Comet 203589.
Features
- Material Made of excellent quality rubber material,it's sturdy and durable in use.
- Replace Part Number :YONQIFON go-kart drive belt used on go kart belts replace for Manco 5959 Comet 203589
- Specific Size :Width: 0.75, Length: 27-1/32, center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch
- Wide Applications : The 30 series torque converter belt used for most Manco American Sport works and Ken-bar Karts with 5hp-7hp engines. And also used on the Comet TAV2 bolt on torque-a-verter kit
- See more on Amazon...
Brand: YONQIFON | Manufacturer: YONQIFON
See On Amazon #8
3/4 Inch Go Kart Clutch Bolt Kit Engine Clutch and Lock Washer, Minibike and Kart Engine, 10/12 Teeth Clutch Bolt (2 Sets)
Asin: B08PKL2VDM
Reliable And Durable: Our Clutch Bolt Is Made Of Stainless Steel Material, Wear And Tear Resistant, Not Easily Crack, Peel, Deform Or Fade, Rust Proof And Corrosion Resistance, Good Hardness And Thickness, Can Accompany You Long Term.
Convenient To Install: Our Clutch Bolt Has Precise Size Which Is Nicely Fit For Your Engines Parts, This Bolt Secures Your Clutch To Your Crankshaft Without The Use Of Set Screws, Convenient To Install And Remove.
Fits Most Vehicles: Our Kart Clutch Bolts Kit Is Suitable For Small Vehicles, Riding Lawnmowers, Small Tractors, Go Karts, Mini Bikes, Mini Choppers, Atv, Motorcycles, And Winches, Widely Applicable In Your Life And Bring Your Much Convenience.
Features: Our Engine Clutch Kit Includes Washer And Lock Washer, Compatible With Predator 212 Engines And Most Other 3/4 Inch Shaft Engines, Practical To Use In Your Karts And Other Vehicles Alike.
Features
- Different quantity to choose: we provide you 2 different quantity of kart clutch bolts kit to choose, namely, 2 sets or 4 sets, you can choose the quantity according to your actual needs, practical car accessories for you to use in daily life
- Features: our engine clutch kit includes washer and lock washer, compatible with predator 212 engines and most other 3/4 inch shaft engines, practical to use in your karts and other vehicles alike
- Reliable and durable: our clutch bolt is made of stainless steel material, wear and tear resistant, not easily crack, peel, deform or fade, rust proof and corrosion resistance, good hardness and thickness, can accompany you long term
- Fits most vehicles: our kart clutch bolts kit is suitable for small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and winches, widely applicable in your life and bring your much convenience
- Convenient to install: our clutch bolt has precise size which is nicely fit for your engines parts, this bolt secures your clutch to your crankshaft without the use of set screws, convenient to install and remove
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
See On Amazon #9
FDJ Predator 212CC Torque Converter Kit 30 Series 3/4" Go Kart Mini Bike Comet Clutch Set 3/4" Inch 10T #40 or #41 Chain Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter kit
Asin: B0C3H4C81M | Model: 30 Series | PartNumber: 30 Series | Ean: 0611040615958 | UPC: 611040615958
Unit Replaces: Our Go-Cart Torque Converter Kit Replaces Oem Part Numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, Tav2 30-75, Yelf Dog Drive Unit Q43201w.Replaces For Comet Manco Go Karts..
Complete Kit: Our Kit Comes With Everything You Need For A Hassle-Free Installation, Including 1 X 3/4" Driver Pulley, 1 X 5/8" Driver Pulley, 1 X Plastic Assy Cover, 1 X Aluminum Mounting Plate, 1 X Drive Belt, 1 X 10 Tooth Sprocket For #40/41/420 Chain, 1 X 12 Tooth Sprocket For #35 Chain (Chain Not Included), And 1 X Full Mounting Hardware.".
Perfect Fit: Our 30 Series Torque Converter Belt For 6" Driven Has A Length Of 70.5Cm / 27.76", Outside Circumference Of 27 23/64", And Width Of 3/4" (1.9Cm / 0.75"). Center To Center Of Driver And Driven Is 6-15/16 To 7"..
30 Series Go Kart Clutch Kit: Our Tav2 30 Series Go Kart Clutch Kit Has A 3/4" And A 5/8" Drive Clutch, Suitable For All Engines With 3/4 "Straight Crankshaft.The 3/4" Drive Clutch Comes With Your Choice Of A 10 Tooth Sprocket For A 40/41 Chain Or A 12 Tooth Sprocket For A 35 Chain. Its Asymmetrical Design Reduces Engine Load, Allowing Higher Speeds And Smoother Acceleration. It's A Huge Improvement Over The Old Centrifugal Clutch..
Features
- FOR 212CC 2HP-7HP GO KART TORQUE CONVERTER: Our 3/4" Torque Converter is a direct replacement kit for the popular Comet TAV2 go-kart torque-converter 30 series. It's perfect for engines with a 3/4" Straight Crankshaft and produces 2-7hp. DIY modifications to your Mini Bike require some mechanical ability.
- 30 SERIES GO KART CLUTCH KIT: Our TAV2 30 Series Go Kart Clutch Kit has a 3/4 and a 5/8 drive clutch, suitable for all engines with 3/4 straight crankshaft.The 3/4 drive clutch comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. Its asymmetrical design reduces engine load, allowing higher speeds and smoother acceleration. It's a huge improvement over the old centrifugal clutch.
- UNIT REPLACES: Our Go-Cart Torque Converter Kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.Replaces for Comet Manco Go Karts.
- Perfect Fit: Our 30 Series Torque Converter Belt for 6 Driven has a length of 70.5cm / 27.76, outside circumference of 27 23/64, and width of 3/4 (1.9cm / 0.75). Center to center of driver and driven is 6-15/16 to 7.
- COMPLETE KIT: Our kit comes with everything you need for a hassle-free installation, including 1 x 3/4 Driver Pulley, 1 x 5/8 Driver Pulley, 1 x Plastic Assy Cover, 1 x Aluminum Mounting Plate, 1 x Drive Belt, 1 x 10 Tooth Sprocket for #40/41/420 Chain, 1 x 12 Tooth Sprocket for #35 Chain (Chain not included), and 1 x Full Mounting Hardware.
- See more on Amazon...
Brand: FDJ | Manufacturer: FDJ
Dimensions: 13.00 x 7.00 x 7.00 inches
Warranty: 3 month
See On Amazon #10
Go Kart Clutch 3/4" Bore 10T with #40 41 420 Chain for Go Kart Minibike Yerf-Dog karts with Tecumseh
Asin: B08JY8TKZV | Ean: 8425553683609
【Product Detail】: 3/4" Bore 10T Sprocket With 40/41/420 Chain Designed For 2-7Hp 212Cc Predator Engines Clutch Performance Parts.
【Before Purchasing】: Please Check Carefully Up And Below Information About Our Go Cart Clutch 3/4 Shaft Fitment Before Your Purchasing, Any Question, Please Contact Us First, Thank You!.
【Attention】: 3 /4-Inch Centrifugal Clutch For Single Wheel Belt Direct Drive Karts With Tires No Larger Than 15" Tall.
【Fitment】: Fit For 2- 6.5Hp Small Engines Honda Gc160, Gc190, Gx120, Gx140, Gx160, Gx200. And For Briggs Stratton And 2-6.5 Hp With 3/4" Shaft. Tecumseh Engines 2-6.5 Hp With 3/4" Shaft.
Features
- General Fitment : This go kart clutch and chain fit for Go Kart Minibike Yerf-Dog karts with Tecumseh
- Fitment : Fit for 2- 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200. And for Briggs Stratton and 2-6.5 HP with 3/4 Shaft. Tecumseh Engines 2-6.5 HP with 3/4 Shaft
- Product Detail : 3/4 Bore 10T Sprocket with 40/41/420 Chain designed for 2-7Hp 212cc Predator engines clutch performance parts
- Attention : 3 /4-inch centrifugal clutch for single wheel belt direct drive karts with tires No Larger Than 15 tall
- Before Purchasing : Please check carefully up and below information about our go cart clutch 3/4 shaft fitment before your purchasing, any question, please contact us first, thank you!
- See more on Amazon...
Brand: TEANTECH | Manufacturer: TEANTECH
See On Amazon #11
Complete Torque Converter for Predator 212 Go Kart Clutch Kit Set 3/4inch 10T #40/41 and 12T #35 Chain Replacement for 218353A Manco Comet TAV2
Asin: B07D9BNY91 | Model: GKC0003-AP | PartNumber: GKC0003-AP | Ean: 0680666155223 | UPC: 680666155223
12T Sprocket For #35 Chain And 10T Sprocket For 41/40 Chain Drive Clutch Bore 3/4"(19Mm).
Complete Torque Converter Kits Are Used In Small Vehicles, Riding Lawnmowers, Small Tractors, Go Karts, Mini Bikes, Mini Choppers, Atv, Motorcycles, And Waterski Winches.
Unit Replaces:Comet 218353A, 219552A, 219456A, 217610A, And 203814A Tav2 30-75.
Made Of High Quality Iron And Aluminum Material, Which Is Sturdy, Durable, Maximum Torque, Wear-Resisting And Fast Heat Dissipation.
Features
- Torque converter for predator 212 - Replace Manco Comet TAV2;Recommended engine: within 8.0 HP 212CC engines, 3/4"shaft with flat key
- Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
- 12T sprocket for #35 chain and 10T sprocket for 41/40 chain drive clutch bore 3/4(19mm)
- Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75
- Complete Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
- See more on Amazon...
Brand: Voltstorm
Dimensions: 7.48 x 13.39 x 7.48 inches
See On Amazon #12
VASHLY Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain Predator 212 Centrifugal Clutch 10T for Go Kart Minibike and Fun Kart Engine
Asin: B09G33PQTH | Ean: 0755795676144 | UPC: 755795676144
【Product Material】 The Go Kart Clutch Is Made Of Quality Iron Material, Which Is Lightweight, Portable,Maximum Torque, Wear-Resisting And Fast Heat Dissipation..
【Before Purchasing】Package Includes 1 X 3/4 10 Teeth Clutch, 2 X Clutch Bolt、2 X Washer Kit, And 2 X Screw Wrench, Please Check Carefully Up And Below Information About Our Go Kart Clutch 3/4" Bore 10T Shaft Fitment Before Your Purchasing, If You Have Any Question, Please Contact Us First, Thank You!.
【Easy To Install】 Easy To Install, Metric Property Bolt And Washer Kit Are Included. Mounts Onto Crankshaft Using Bolt And Washer On The End Of The Crankshaft.Bi-Directional Operation, Clutch Can Mount Inward Or Outward On Crankshaft..
【Compatible】The Centrifugal Clutch 3/4" Bore 10 Tooth Fit 2 - 6.5 Hp 2300 Rpm Gasoline Engines For Minibike, Generator, Garden Tractors, Go Karts, And For Scooterx Sport Kart, Mini Bike, Mini Chopper, And Mini Motorcycles Engines..
Features
- 10 Tooth Centrifugal Clutch This go kart clutch 3/4" Bore 10T for #40/41/420 Chain, Designed for Single Wheel Drive Karts with Tires no larger than 15" Tall Chain Not included).
- Compatible The centrifugal clutch 3/4 bore 10 tooth fit 2 - 6.5 HP 2300 RPM gasoline engines for minibike, generator, garden tractors, go karts, and for scooterx sport kart, mini bike, mini chopper, and mini motorcycles engines.
- Product Material The Go kart clutch is made of quality iron material, which is lightweight, portable,maximum torque, wear-resisting and fast heat dissipation.
- Easy to Install Easy to install, Metric Property Bolt and Washer Kit are Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft.Bi-directional Operation, Clutch Can Mount Inward or Outward on Crankshaft.
- Before Purchasing Package Includes 1 x 3/4 10 Teeth Clutch, 2 x Clutch Bolt 2 x Washer Kit, and 2 x Screw wrench, Please check carefully up and below information about our go kart clutch 3/4 Bore 10T shaft fitment before your purchasing, If you have any question, please contact us first, thank you!
- See more on Amazon...
Brand: Vashly | Manufacturer: Vashly
See On Amazon #13
QYMOTO Go Kart Drive Belt 725, Hammerhead 80T, Mudhead 208r Belt, 14704 Belt for Trailmaster Mid Karts MB200, 30 Series Torque Converter Belts, Comet Go Kart Belt ASW 14704
Asin: B0BK9MCWN3
Replace Part Number: 9.110.018 - 9.100.018-725.
Condition：100% Brand New.
Package Include:1*Go Kart Drive Belt 725(As Pictured).
Replacement Belt Used On Many Kits As Well Trailmaster And Hammerhead Mid Karts. Some Of These Use The 669 Belt, Check Your Old Belt.
Features
- FITMENT: Go Kart drive belt 725 belts kit fit for 30 series torque converter.Fits American Sportworks 4170 Fox Vector Go Karts and 208cc American Sportworks 5210 Marauder Go Karts
- Replacement belt used on many kits as well Trailmaster and Hammerhead mid karts. Some of these use the 669 belt, check your old belt
- REPLACE PART NUMBER: 9.110.018 - 9.100.018-725
- PACKAGE INCLUDE:1*Go Kart Drive Belt 725(as pictured)
- CONDITION 100% Brand New
- See more on Amazon...
Brand: QYMOTO | Manufacturer: QYMOTO
Dimensions: 0.79 x 5.91 x 11.81 inches
See On Amazon #14
FDJ 3/4" Centrifugal Clutch 12 Tooth with 35 Chain Go Kart Clutch 3/4 Bore and Chain Kit for Mini Bike, Fun Kart, Fits 2-7 HP Honda Engines
Asin: B08ZMWPBJM
✔【Strong And Durable】Made Of High Quality Chrome Plating Iron Material, Which Is Lightweight, Sturdy, Durable, Wear-Resisting, Fast Heat Dissipation, Stronger And Features Maximum Torsion.
✔【Easy Installation & Satisfied Guarantee 】Simply Mounts The Clutch Onto Crankshaft Using Bolt And Washer On The End Of The Crankshaft, Easy To Operate Within Minutes. Hassle-Free Return And Money Back, Shop With Confidence!.
✔【Complete Set】Package Includes 1 X 3/4 12 Teeth Clutch, 1 X 5 Feet #35 Chain, 2 X Chain Connecting Links, 1 X Clutch Bolt And Washer Kit, 1 X Screws Set, 1 X Allen Wrench. Saves You The Hassle Of Having To Hunt Down All The Right Parts At Your Local Hardware Store..
✔【Also Compatiable】3/4 Centrifugal Go Kart Clutch Is Perfect For Go Kart Baja Mini Bike Mb165 And Mb200, Including Baja Heat, Mini Baja And The Baja Warrior.
Features
- GENERAL FITMENT 3/4" Go Kart Clutch 12T with 5 Feet 35 Chain Set Fits for 2- 6.5HP Small Engines Honda GC160, GC190, GX120, GX140, GX160, GX200. And for 2-7Hp 212cc Predator Engines Clutch Performance Parts.
- ALSO COMPATIABLE 3/4 Centrifugal Go Kart Clutch is Perfect for Go Kart Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the Baja Warrior
- STRONG AND DURABLE Made of High Quality Chrome Plating Iron Material, Which is Lightweight, Sturdy, Durable, Wear-resisting, Fast Heat Dissipation, Stronger and Features Maximum Torsion
- COMPLETE SET Package Includes 1 x 3/4 12 Teeth Clutch, 1 x 5 feet #35 Chain, 2 x Chain Connecting Links, 1 x Clutch Bolt and Washer Kit, 1 x Screws Set, 1 x Allen Wrench. Saves You the Hassle of Having to Hunt Down All the Right Parts at Your Local Hardware Store.
- EASY INSTALLATION & SATISFIED GUARANTEE Simply Mounts the Clutch onto Crankshaft Using Bolt and washer on the End of the Crankshaft, Easy to Operate Within Minutes. Hassle-Free Return and Money Back, Shop with Confidence!
- See more on Amazon...
Brand: FDJ | Manufacturer: FDJ
See On Amazon #15
VEVOR Torque Converter CVT 2HP-7HP 3/4" Go Kart Clutch 212CC 30 Series Mini Bike 10T #40 41 Chain and 12T #35 Replacement Set TAV2 30-75 218353A Manco CVT Clutch Small Engine Drive Belt
Asin: B0BNN4NRFH | Model: VV-TC-1012 VV-TC-10 | PartNumber: VV-TC-1012 VV-TC-10 | Ean: 0840281575022 | UPC: 840281575022
High-Quality Drive Clutch: We Have A 3/4'' Driver Pulley And A 5/8'' Bore Driven Pulley. They Are Made Of Aluminum And Steel. And It Also Can Fit For 4-8 Hp Small Torque Converter Systems..
Complete Accessories: The Torque Converter Clutch Kit Comes With Full Accessories: 1 X 3/4" Driver Pulley. 1 X 5/8" Bore Driven Pulley. 1 X Plastic Assy Cover. 1 X Aluminum Mounting Plate. 1 X Driver Belt. 1 X Full Mounting Hardware..
High Adaptability: Compatible With 3/4" & 5/8" Straight Crankshaft. You Can Usually Use The Torque Converter On 4-8 Hp Go-Karts And Motorbikes..
Updated Durable Belt: The Go-Kart Asymmetrical Belt 669 Is One Of The Highlights For Our Torque Converter For Go-Karts. Using This Excellent Elastic Belt Properly Can Improve The Life Span Of Your Torque Converter..
Features
- TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life. It will surely take your off road adventures to new heights!
- Updated Durable Belt: The go-kart asymmetrical belt 669 is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter.
- High-quality Drive Clutch: We have a 3/4'' Driver Pulley and a 5/8'' bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems.
- High Adaptability: Compatible with 3/4 & 5/8 straight crankshaft. You can usually use the torque converter on 4-8 hp go-karts and motorbikes.
- Complete Accessories: The torque converter clutch kit comes with full accessories: 1 x 3/4 driver pulley. 1 x 5/8 bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
See On Amazon #16
CXRCY Torque Converter 3/4" 10T #40 41 420 and 12T #35 Chain 212CC 30 Series Go Kart Mini Bike Clutch Comet TAV2 30-75 Engine Drive Replacement for Predator 212 Clutch Set,
Asin: B08RJFVH8F | Model: 10CCL12CL | PartNumber: 10CCL12CL
【Full-Set Equipment】This Kart Torque Converter Kit Includes The Main Parts: A 3/4" Driver Pulley And A 5/8" Driven Pulley,And Includes Other Accessories Like Drive Belt,Plastic Assy Cover,Aluminum Mounting Bracket Plate,And Full Mounting Hardware Kit..
【Attention Please!】 If You Use The Engines Of American Brand Or American Standard Shaft Thread (Unf) Such As Honda, Preditor, Or Other Not Metric Standard Thread Shaft, Please Use This Unf Screwes. If You Are Not Sure The Screw Standard, Please Use Your Hand To Install The Longest Black Screwes To Check If It Can Lock The Shaft Very Good, If It Not Workes Good Please Use The White Metric Screws In Other Bag..
【Replacement Part Number】Comet 219552A, 203814A, 219456A, 218352A, 218353A, Tav2 30-75..
【Widely Fitment&With 2 Sprockets】Recommende Predator 212Cc 6.5 Hp Go Kart Torque Converter Clutch All 2Hp-7Hp Engines,3/4" Shaft With Flat Key.You Can Use On Motorcycle,Go Kart ,Mini Vehical And Etc.Includes 1 X 12 Tooth Sprocket For #35 Chain, 1 X 10 Tooth Sprocket For #40/41/420 Chain. It Fits All Engines With A 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
Features
- High Quality Materials Our Torque Converter is made of high quality iron and aluminum materials, light weight, durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.
- Widely Fitment&With 2 Sprockets Recommende predator 212cc 6.5 hp go kart torque converter clutch all 2HP-7HP engines,3/4 Shaft with flat key.You can use on motorcycle,go kart ,mini vehical and etc.Includes 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain. It fits all engines with a 3/4 Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
- Full-Set Equipment This kart torque converter kit includes the main parts: a 3/4 driver pulley and a 5/8 driven pulley,and includes other accessories like drive belt,plastic assy cover,aluminum mounting bracket plate,and full mounting hardware kit.
- Replacement part number Comet 219552A, 203814A, 219456A, 218352A, 218353A, TAV2 30-75.
- ATTENTION PLEASE! If you use the engines of American brand or American standard shaft thread (UNF) such as Honda, Preditor, or other not Metric standard thread shaft, please use this UNF screwes. If you are not sure the screw standard, please use your hand to install the longest black screwes to check if it can lock the shaft very good, if it not workes good please use the white metric screws in other bag.
- See more on Amazon...
Brand: CXRCY | Manufacturer: FT
Dimensions: 7.80 x 9.99 x 14.00 inches
See On Amazon #17
30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4" Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589
Asin: B09J4Y3GTP | Model: 30 Series 6.5 HP 212CC 203589 | PartNumber: 30 Series 6.5 HP 212CC 203589 | Ean: 0768564477125 | UPC: 768564477125
【Wide Use--Torque Converter 3/4】: Small Engine Torque Converter Clutches Are Heavily Used In Go Karts, Mini Bikes, And Lawn Mowers.For Go Kart, Mini Bike, Lawnmower, Small Tractors, Fun Kart, Golf Karts, Mini Choppers, Atv, Motorcycles, And Waterski Winches Etc..
【Wide Use--Go Kart Clutch Belt】:The Go-Kart Drive Belt Used On Most Manco, American Sportworks And Ken-Bar Karts With 5Hp-7Hp Engines.Also Used On The Comet Tav2 Bolt On Torque-A-Verter Kit.Center To Center Spacing For The Driver And Driven Pulley Needs To Be Between 6 5/8 Inch And 6 11/16 Inch..
【Wide Use--Torque Converter 3/4】: Small Engine Torque Converter Clutches Are Heavily Used In Go Karts, Mini Bikes, And Lawn Mowers.For Go Kart, Mini Bike, Lawnmower, Small Tractors, Fun Kart, Golf Karts, Mini Choppers, Atv, Motorcycles, And Waterski Winches Etc..
【Torque Converter】：This 3/4" Torque Converter Is A Direct Replacement Kit For The Most Popular Comet Tav2 Go-Kart Torque Converter 30 Series..
Features
- 30 Series Torque Converter and Go Kart Drive Belt New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4" Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589.
- Torque Converter This 3/4 torque converter is a direct replacement kit for the most popular comet TAV2 go-kart torque converter 30 series.
- Wide Use--torque converter 3/4 : Small engine torque converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc.
- Wide Use--torque converter 3/4 : Small engine torque converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc.
- Wide Use--go kart clutch belt :The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley needs to be between 6 5/8 inch and 6 11/16 inch.
- See more on Amazon...
Brand: YOHIB | Manufacturer: YOHIB OEM
Dimensions: 0.35 x 2.10 x 1.10 inches
See On Amazon #18
1PZ DB1-P30 30 Series Go Kart Drive Belt for Replacing Manco 5959 / Comet 203589 (Pack of 3)
Asin: B07Q6C7MMX | Ean: 4741506623695
Oem Part Number: 5959 ; 203589A ; 203589.
90 Days Warranty, Hassle Free Return, Money Back Guarantee.
Package Include 3X Belt.
Fits American Sportworks Black Fox, Conquest, Fox 2X5, Fox Lxt, Havoc, Red Fox Lxt, Silver Fox, Vortex, Manco 285 And 286 Dingo, 485, 486, 606 Model Go Karts And More.
Features
- Replace most Manco American Sportworks and Ken-Bar Karts with 5hp - 7hp engines Comet TAV2 bolt on torque-a-verter kit
- Fits American Sportworks Black Fox, Conquest, Fox 2x5, Fox LXT, Havoc, Red Fox LXT, Silver Fox, Vortex, Manco 285 and 286 Dingo, 485, 486, 606 Model Go Karts and more
- OEM Part Number: 5959 ; 203589A ; 203589
- Package include 3x Belt
- 90 Days Warranty, Hassle free Return, Money Back Guarantee
- See more on Amazon...
Brand: 1PZ | Manufacturer: Dragonpartify LLC
See On Amazon #19
Go Kart Clutch 3/4" Bore 10T for 212cc Predator Engine Go Kart Minibike Honda Kart Engines (3/4" Bore 10T)
Asin: B0CGZM9MHG
✔️【3/4 Inch 10T Clutch】: 3/4" Bore 10T Sprocket For 40/41/420 Chain (Not Included Chain) Designed For 2-7Hp 212Cc Predator Engines Clutch Performance Parts.
✔️【Before Purchasing】: Please Check Carefully Up And Below Information About Our Go Cart Clutch 3/4 Shaft Fitment Before Your Purchasing, Any Question, Please Contact Us First, Thank You!.
✔️【Attention】: 3 /4" Bolt Inch Centrifugal 10T Clutch For Single Wheel Belt Direct Drive Karts With Tires No Larger Than 15" Tall.
✔️【Fitment】: Fit For 2- 6.5Hp Small Engines Honda Gc160, Gc190, Gx120, Gx140, Gx160, Gx200. And For Briggs Stratton And 2-6.5 Hp With 3/4" Shaft. Tecumseh Engines 2-6.5 Hp With 3/4" Shaft.
Features
- General Fitment : This go kart clutch and chain replacement for Go Kart Minibike Yerf-Dog karts with Tecumseh,made of quality iron material, Keyway: Built-in 3/16"
- Fitment : Fit for 2- 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200. And for Briggs Stratton and 2-6.5 HP with 3/4 Shaft. Tecumseh Engines 2-6.5 HP with 3/4 Shaft
- 3/4 inch 10T Clutch : 3/4 Bore 10T Sprocket for 40/41/420 Chain (NOT Included Chain) designed for 2-7Hp 212cc Predator engines clutch performance parts
- Attention : 3 /4 bolt inch centrifugal 10T clutch for single wheel belt direct drive karts with tires No Larger Than 15 tall
- Before Purchasing : Please check carefully up and below information about our go cart clutch 3/4 shaft fitment before your purchasing, any question, please contact us first, thank you!
- See more on Amazon...
Brand: TEANTECH | Manufacturer: TEANTECH
See On Amazon
Looking For Something Else?
Search