EZDIY-FAB 12V to 5V RGB Converter, 3-Way Splitter, SATA Connector, 50 Color Modes, 100x 5V LEDs
Asin: B082KJH2T3 | Model: US-12V to 5V Controller | PartNumber: US-12V to 5V Controller
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Included 3-Way Splitter, Could Extension With More Argb Devices.
The Converter Supports A Maximum Of 100X 5V 3-Pin Argb Leds And Can Withstand A Maximum Current Of 3A. Please Ensure Not To Exceed The Specified Load Limit..
Voltage Transformer From 12 To 5V, Powered By Sata..
Only Could Sync With 12V Rgb Motherboard. The Signal Numbers Of 12V Rgb And 5V Argb Of Different Motherboards Will Be Slightly Different. On Some Motherboards, Some Rgb Mixed Colors May Not Be Displayed Correctly (Such As Orange, Yellow), And The Color Of The Led Does Not Change Smoothly In Cycle Color Mode..
Features
- Mini Control box with built-in 50 color modes, or Holding mode button to sync with 12V RGB Motherboard
- ONLY could sync with 12V RGB motherboard. The signal numbers of 12V RGB and 5V ARGB of different motherboards will be slightly different. On some motherboards, some RGB mixed colors may not be displayed correctly (such as orange, yellow), and the color of the LED does not change smoothly in cycle color mode.
- Included 3-way splitter, could extension with more ARGB devices
- Voltage transformer from 12 to 5V, powered by SATA.
- The converter supports a maximum of 100x 5V 3-Pin ARGB LEDs and can withstand a maximum current of 3A. Please ensure not to exceed the specified load limit.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon Similar To EZDIYFAB 12V to 5V RGB
#1
EZDIY-FAB Moonlight 120mm RGB Case Fan with Fan Hub X and Remote,Motherboard Aura SYNC,Speed Control,ARGB Fan for PC Case Desktop-6 Pack
Asin: B07XBSKTY6 | Model: US-rgb slim fan with hub X-5P | PartNumber: US-rgb slim fan with hub X-5P
With Ezdiy-Fab Fan Hub X And 21-Key Remote -You Can Instantly Adjusting Led Back-Light Effects, Colors, Brightness And Fan Speed. Note：Maximum Current-5A, Hub-X Only Supports 6 Fans.
Self-Lubricated Bearing And Friction-Reducied Substance Lowers Operation Noise And Enhance Thermal Efficiency.
Equipped With 8 Anti-Vibration Rubber Pads To Effectively Prevent Vibration During Operation, Greatly Reducing Noise And Improving Efficiency..
Sync Rgb Lighting Via Motherboard: Support M/B 3 Pin Rgb Header (5V, Di, -, G),Compatible With Asus Aura, Asrock Rgb, Gigabyte Fusion, Msi Rgb.
Features
- Astonishing lighting effects-Tri-aperture inside and outside luminous light effect,Give out an impact visual light effect.
- Sync RGB lighting via motherboard: Support M/B 3 pin RGB Header (5V, Di, -, G),Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB
- With EZDIY-FAB Fan Hub X and 21-key remote -You can instantly adjusting LED back-light effects, colors, brightness and Fan speed. NOTE Maximum Current-5A, HUB-X ONLY Supports 6 Fans
- Equipped with 8 anti-vibration rubber pads to effectively prevent vibration during operation, greatly reducing noise and improving efficiency.
- Self-lubricated Bearing and friction-reducied substance lowers operation noise and enhance thermal efficiency
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Dimensions: 4.72 x 4.72 x 0.98 inches
See On Amazon #2
DeepCool RGB Convertor, 5V ADD-RGB to 12V RGB TransferHub, Motherboard with 4-pin Header can Contorl 5V ADD-RGB Products, Non-Compatible Asrock Motherboard
Asin: B09ZYDB4X8 | Model: DP-FRGB-CHUB5-12V | PartNumber: DP-FRGB-CHUB5-12V | Ean: 0657439781873 | UPC: 657439781873
3.5V Add-Rgb Equipment Can Be Compatible With 12V Rgb Motherboard. *Rainbow And Breathing Mode For Some Motherboard Models Are Not Compatible.
5.Rgb Convertor Size: About 45X45x12mm/1.7X1.7X0.47In.
4.Magnet & Velcro Installation ,Voltage Transformer From 5V To 12V, Powered By Sata.
2.5V To 12V Rgb Transfer Hub,5V Add-Rgb To 12V Rgb Transfer Hub, Motherboard With 12V 4-Pin Header Can Contorl 5V Add-Rgb Products, Non-Compatible With Asrock Motherboard.
Features
- 1.Convert 3-pin (+5V) ARGB Fans to 4-pin (+12V) RGB Capable Motherboard (NOT Compatible with ASRock Motherboard)
- 2.5V to 12V RGB transfer hub,5V ADD-RGB to 12V RGB Transfer Hub, Motherboard with 12V 4-pin Header can Contorl 5V ADD-RGB Products, Non-Compatible with Asrock Motherboard
- 3.5V ADD-RGB equipment can be compatible with 12V RGB motherboard. *Rainbow and breathing mode for some motherboard models are not compatible
- 4.Magnet & Velcro installation ,Voltage transformer from 5V to 12V, powered by SATA
- 5.RGB Convertor Size: About 45x45x12mm/1.7x1.7x0.47in
- See more on Amazon...
Brand: Shaking Tank | Manufacturer: Shaking Tank
Dimensions: 1.10 x 4.72 x 2.99 inches | Weight: 0.07 Pounds
See On Amazon #3
EZDIY-FAB ATX 24-pin 90 Degree Power Connector 5V 3 Pin ARGB Rainbow Female to Male Power Supply/Power Adapter for Computer Motherboard -1 Pack
Asin: B096MBK5BX | Model: EZDPI161 | PartNumber: EZDPI161
90 Degrees Right Angle Design, Connecting Between Psu 24 Pin Cable And Motherboard Connector, Does Not Cause Pressure On The Motherboard Connector For Long-Term Stable Use..
This Design Will Solve The Psu Installation For The Limited Height Chassis You Can Install The 24Pin Power Cable From Vertical To Horizontal Direction With This Adapter..
Atx 24-Pin Female To Male Connector 90 Degrees Suitable For Motherboard .Plug And Play Installation..
Built With The Advanced Argb Lighting System , It Features Argb Rainbow Color That Glows Attractively Without Straining Your Eyes ..
Features
- The ATX 24 Pin 90 Adapter is compatible with all ATX motherboards and power supply units that support a standard 24 pin main power connection.
- Built with the advanced ARGB lighting system , it features ARGB Rainbow color that glows attractively without straining your eyes .
- 90 Degrees right angle design, connecting between PSU 24 Pin Cable and motherboard connector, does not cause pressure on the motherboard connector for long-term stable use.
- ATX 24-pin female to male connector 90 degrees suitable for motherboard .Plug and play installation.
- This design will solve the PSU installation for the limited height chassis You can install the 24PIN power cable from vertical to horizontal direction with this adapter.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Weight: 0.07 pounds
See On Amazon #4
12V 4Pin PWM & 5V 3Pin ARGB with SATA 15Pin Power 2-in-1 Hub 6 Way Sync CPU Cooling Fan Addressable RGB Lighting PCB Splitter for Extended Motherboard Interface -Black Compatible With Desktop
Asin: B08GCD71CG | Model: 200820 | PartNumber: 200820 | Ean: 0738632121410 | UPC: 738632121410
The Argb Of This Hub Is 5V 3-Pin. This Type Of Fan Can Control A Single Lamp Bead, And Realize The Effects Of Running Water Lamp, Splicing And Displaying Text Patterns Through Programming. Only Compatible With 3Pin 5V Addressable Rgb Headers Or Controllers, Don't Connect To 12V Rgb Components, Otherwise It Might Burn Out..
The Pwm Argb Hub Is Equipped With Two Connecting Cables. Both Length Of The Wires Is 53 Cm. The Red Port On The Hub Is A Professional Port For The Cpu Fan. Gold-Plated Pins, Solid Materials, Strong And Durable..
The Black Hub Is Perfectly Integrated With Chassis. Mini And Compact, Which Effectively Saves Your Space, Makes Cable Management Easier, And The Inside Of The Chassis Is Tidy. The Adhesive On The Back Can Be Used To Fix The Hub In The Chassis, Tool-Free Installation, And Not Easy To Drop..
This Cpu Cooling Sata Hub Is Powered By Sata 15Pin, Which Can Simultaneously Supply Power To The Fan And 5V 3 Pin Argb Products. The Motherboard Has No Power Supply Burden And Can Maintain A Stable Output Even At Full Load..
Features
- This is ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB (5V 3pin) plugs and PWM (12V 4pin) plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color).
- This CPU Cooling SATA Hub is powered by SATA 15PIN, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. The motherboard has no power supply burden and can maintain a stable output even at full load.
- The ARGB of this hub is 5V 3-pin. This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming. Only compatible with 3pin 5V addressable RGB headers or controllers, don't connect to 12V RGB components, otherwise it might burn out.
- The black hub is perfectly integrated with chassis. Mini and compact, which effectively saves your space, makes cable management easier, and the inside of the chassis is tidy. The adhesive on the back can be used to fix the hub in the chassis, tool-free installation, and not easy to drop.
- The PWM ARGB hub is equipped with two connecting cables. Both length of the wires is 53 cm. The red port on the hub is a professional port for the CPU fan. Gold-plated pins, solid materials, strong and durable.
- See more on Amazon...
Brand: XMSJSIY | Manufacturer: sisselyan
Dimensions: 0.39 x 3.94 x 1.97 inches
See On Amazon #5
ZCZQC ARGB Controller 5V 3Pin Aura RGB Controller Plastic SATA Power Supply Light Stripe Remote Controller
Asin: B09HGJRNTQ | Model: ARGB-CPSL-1 | PartNumber: ARGB-CPSL-1 | Ean: 0729388712656 | UPC: 729388712656
Widely Used: This Controller Is A 5V 3-Pin Argb Product To Sata Power Supply Controller, It Does Not Need Motherboard Support, Directly Plug In The Power Supply Sata Interface To Supply Power..
The Package Includes: 1Pc Argbmini Controller..
Simple Button: M Button: Click To Switch To The Next Lighting Mode. S Key: Click To Switch The Light Change Speed. C Key: Click To Switch To Other Light Colors In The Same Mode Or Reverse The Light..
Portable Size: Cable Length: 3Pin: 160 (+/-10) Mm. Sata: 500 (+/-10) Mm. Argbmini Controller: Length Is 46Mm/1.81Inch, Width Is 22Mm/0.87Inch, Height Is 9.5Mm/0.37Inch..
Features
- Simple design: Simple button design, simple operation, practical function, SATA power supply, compact and exquisite, cool lighting mode, extended interface cable design, convenient connection, and meet the needs of most cases for cable length.
- Portable size: cable length: 3PIN: 160 (+/-10) mm. SATA: 500 (+/-10) mm. ARGBmini controller: length is 46mm/1.81inch, width is 22mm/0.87inch, height is 9.5mm/0.37inch.
- Widely used: This controller is a 5V 3-pin ARGB product to SATA power supply controller, it does not need motherboard support, directly plug in the power supply SATA interface to supply power.
- Simple button: M button: Click to switch to the next lighting mode. S key: Click to switch the light change speed. C key: Click to switch to other light colors in the same mode or reverse the light.
- The package includes: 1PC ARGBmini controller.
- See more on Amazon...
Brand: ZCZQC | Manufacturer: ZCZQC
Weight: 0.02 pounds
See On Amazon #6
EZDIY-FAB GPU Support Bracket,5V 3PIN ARGB Graphics Card Brace, GPU Support Stand Adjustable Height,Aluminum Video Card Sag Holder
Asin: B09NB9MSWF | Model: EZDPI171 | PartNumber: EZDPI171
Easy Installation, No Damage To The Graphics Card, Height Can Be Adjusted According To The Size Of Different Graphics Cards And Pc Case(67Mm/2.63In-106Mm/4.17In Adjustable)..
Featuring With 5V 3Pin Argb Led Lights, Control And Change The Colors By Connecting To Motherboard Or By Other Argb Controller..
With Hidden Magnet Design On Bottom, It Not Only Lets User Install It Easily But Also Stand Firmly Inside The Case..
Aluminum Alloy Material, Sturdy And Not Deformed, Can Be Used For A Long Time Or Repeatedly..
Features
- Updated design Graphics card brace with compact size, light weight, doesn't take up spaces..
- Aluminum alloy material, sturdy and not deformed, can be used for a long time or repeatedly.
- Easy installation, no damage to the graphics card, height can be adjusted according to the size of different graphics cards and PC case(67mm/2.63in-106mm/4.17in adjustable).
- With hidden magnet design on bottom, it not only lets user install it easily but also stand firmly inside the case.
- Featuring with 5V 3pin ARGB LED lights, Control and change the colors by connecting to Motherboard or by other ARGB controller.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #7
EZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black
Asin: B08R9PDBTD | Model: US-3528 RGB GPU Bracket-B-with new riser | PartNumber: US-3528 RGB GPU Bracket-B-with new riser
Designed For Most Atx Case With At Least 7 Pcie Slots In The Market.
Only Supports Pcie 3.0.: If You Intend To Use A Pcie 4.0 Graphics Card, You Will Need To Enter The Bios And Adjust The Pcie Slot To Gen3 Mode, As The Riser Only Supports Pcie 3.0..
With Movable Bracket, More Flexible In Using Pc Case Interior Space. Note: Please Check Your Case With Enough Space.
Note: Ensure The Pcie Cable Is Fully And Securely Inserted Into The Socket! Please Make Sure The Male Connector (Gold Fingers) Is Fully Inserted Into The Motherboard’S Pcie Socket. Our Riser Has A Very Short Pin Designed To Provide Better Insertion Loss. The Pins May Not Be In Full Contact With The Pcie Socket Pins Resulting In Signal Lanes Drop From X16 To X8, Or Worse At X4 Speed..
The 20Cm/7.8In Pcie Riser With High Quality Tpe Cable And Sectional Design Allows Air Ventilation And Lowers Working Temperatures For Better Overall System Performance..
Vertically Display A Gpu Graphics Card, Compatible With Most Brand's Graphic Card, Show Off The Visual Design Of The Gpu And Its Cooler..
Features
- Vertical GPU Bracket with RGB LED effects, Synchronizable RGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 pin RGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED.
- Vertically display a GPU graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler.
- Designed for most ATX case with at least 7 PCIE slots in the market
- The 20cm/7.8in PCIE riser with high quality TPE cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.
- With movable bracket, More flexible in using PC case interior space. NOTE: Please check your case with enough space
- Note: Ensure the pcie cable is fully and securely inserted into the socket! Please make sure the male connector (Gold Fingers) is fully inserted into the motherboard s PCIe socket. Our riser has a very short pin designed to provide better insertion loss. The pins may not be in full contact with the PCIe socket pins resulting in signal lanes drop from x16 to x8, or worse at x4 speed.
- Only supports PCIe 3.0.: If you intend to use a PCIe 4.0 graphics card, you will need to enter the BIOS and adjust the PCIe slot to Gen3 mode, as the riser only supports PCIe 3.0.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #8
EZDIY-FAB 5V ARGB GPU Holder Brace Graphics Card GPU Support Video Card Holder Bracket, Strenchable Structure, Video Card Sag Holder/Holster Bracket Support RX7990XTX, RTX4090, White-341-1
Asin: B0BPGN3PHM | Model: YIHPI341-1 | PartNumber: YIHPI341-1
Double Bracket Feet To Provide Superior Stability For Your Graphics Card, With Added Flexibility To Install The Each Feet Separately Or Together For Greater Compatibility With A Range Of Gpu Configurations..
Synchronizable Argb Lighting Via Motherboard: Built With The Advanced Argb Lighting System,Support 5V 3Pin Argb Motherboard Synchronization, Multiple Rgb Modes Can Be Switched,Makes Your Computer Case Colorful.* *Please Never Connect It To 4Pin 12Vrgb..
Experience Durable And Stable Support With Our All-Metal Bracket Structure, Complemented By A Sleek Anodized Sandblasted Aluminum Panel For A Stylish And Sophisticated Look..
Features A Stretchable Design That Provides Up To 30Mm Of Expandable Space, Allowing It To Accommodate Graphics Cards Of Varying Sizes With Ease. Its Expandable Nature Enables It To Adjust Both Inward And Outward To Securely Hold The Graphics Card In Place..
Features
- The Slide Type Support Structure is a flexible mechanism that can support GPUs of different lengths (174-280 mm), providing secure installation and adaptability.
- Features a stretchable design that provides up to 30mm of expandable space, allowing it to accommodate graphics cards of varying sizes with ease. Its expandable nature enables it to adjust both inward and outward to securely hold the graphics card in place.
- Double bracket feet to provide superior stability for your graphics card, with added flexibility to install the each feet separately or together for greater compatibility with a range of GPU configurations.
- Experience durable and stable support with our all-metal bracket structure, complemented by a sleek anodized sandblasted aluminum panel for a stylish and sophisticated look.
- Synchronizable ARGB lighting via motherboard: Built with the advanced ARGB lighting system,support 5V 3PIN ARGB motherboard synchronization, multiple rgb modes can be switched,makes your computer case colorful.* *Please never connect it to 4pin 12VRGB.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #9
MEIRIYFA 5V 3 Pin ARGB Splitter Cable 1-to-4 Male 3 Pin Addressable RGB Splitter Extension Connector for MasterFan/MasterLiquid ARGB Series Support LED Sync Cable with Protective Cap 2 Pack
Asin: B09V9YYFD3 | Ean: 0727640611778 | UPC: 727640611778
Note: 1-To-4 Argb Splitter Cable，Only Supports 3 Pin 5V Addressable Rgb Motherboard Header，Does Not Support 4 Pin 12V Rgb Header.
3-Pin Argb Header Compatibility,13Inch/33.5Cm Long And Flexible Material Makes It Easy For Cable Routing. Keep It Effortless And Hassle Free..
High Safety: Protective Cap Is Used To Protect Other Unused Connectors From Electric Shock And Short-Circuit Causing Damage To The Chassis. And Protect The Connector, Prevent The Connector From Being Corroded By Dust, Liquid, Oxidation And Rust, And Keep The Connector Clean And Durable..
Argb Splitter Cable Compatible With Asus, Msi, Gigabyte And Asrock Addressable Rgb Motherboards.
Features
- Simple and Practical:ARGB splitter allows to extend and connect its addressable ARGB LED or ARGB fan through a single motherboard 5V 3 pin ARGB header.multi-interface, smooth link, help solve the problem of insufficient ARGB interface.
- ARGB splitter cable compatible with ASUS, MSI, GIGABYTE and ASROCK addressable RGB motherboards
- Note: 1-to-4 ARGB Splitter Cable Only supports 3 pin 5V addressable rgb motherboard header does not support 4 pin 12V RGB header
- High Safety: Protective cap is used to protect other unused connectors from electric shock and short-circuit causing damage to the chassis. And protect the connector, prevent the connector from being corroded by dust, liquid, oxidation and rust, and keep the connector clean and durable.
- 3-pin ARGB Header compatibility,13inch/33.5cm Long and flexible material makes it easy for cable routing. Keep it effortless and hassle free.
- See more on Amazon...
Brand: MEIRIYFA | Manufacturer: mili dianzi
Dimensions: 0.20 x 12.99 x 1.57 inches
See On Amazon #10
iHTP RGB Convertor 5V ADD-RGB to 12V RGB Transfer Hub
Asin: B09Y8V5X98 | Model: DP-FRGB-CHUB5-12V | PartNumber: DP-FRGB-CHUB5-12V | Ean: 0737917816041 | UPC: 737917816041
5V Add-Rgb Equipment Can Be Compatible With 12V Rgb Motherboard Via The Convertor, To Achieve Synchronous Lighting Compatibility. (Rainbow And Breathing Mode For Some Motherboard Models Are Not Compatible)..
Magnet & Velcro Installation-Can Be Easily Fixed Onto Iron Surfaces Using The Built-In Magnet Or Using The Velcro Included, Keeping The Cables Neat And Tidy. Rgb Convertor Powered By Sata-Voltage Transformer Within 5V To 12V Rgb Transfer Hub Powered By Sata..
Features
- Compatible with Multiple RGB Connectors-Compatible with the 3PIN interface RGB products of mainstream M/B brands like ASUS, Gigabyte and MSI.
- Magnet & Velcro Installation-Can be easily fixed onto iron surfaces using the built-in magnet or using the Velcro included, keeping the cables neat and tidy. RGB convertor Powered by SATA-Voltage transformer within 5V to 12V RGB Transfer Hub powered by SATA.
- 5V ADD-RGB equipment can be compatible with 12V RGB motherboard via the convertor, to achieve synchronous lighting compatibility. (Rainbow and breathing mode for some motherboard models are not compatible).
- See more on Amazon...
Brand: iHTP | Manufacturer: iHTP
Weight: 0.07 pounds
See On Amazon #11
XMSJSIY 5V 3 Pin ARGB to 12V 4 Pin RGB Converter, 5V ADD-RGB to 12V RGB Motherboard Transfer Hub, with SATA Power Cable
Asin: B09QPKL47W | Ean: 0724723845570 | UPC: 724723845570
This Motherboard Light Converter Is Easy To Install, With Velcro Tap Installation, Magnetic Suction Design On The Back And Beautiful Lines.
Note: Rgb Transfer Hub Powered By Sata. After Connecting The Power Cord To Sata Power Supply, 5V Add-Rgb Conversion And 12V Rgb Light Can Be Realized. Neon And Breathing Mode For Some Motherboard Models Are Not Compatible..
Small Things Solve Big Problems. One Box Drives Two 12V Light Bars And Three 5V Light Bars, Which Is Compatible With Most Rgb Connectors On The Market. Rgb Products Compatible With 3Pin Interfaces Of Major Motherboard.
This Rgb Transfer Hub Made Of High-Quality Material, Durable, Firm And Has A Long Service Life..
Features
- This RGB converter help you use a 5V ARGB chassis fan with a 12V 4pin motherboard, Convert 3-pin (+5V) ARGB Fans to 4-pin (+12V) RGB Capable Motherboard (NOT Compatible with ASRock Motherboard)
- This RGB transfer hub made of high-quality material, durable, firm and has a long service life.
- This motherboard light converter is easy to install, with velcro tap installation, magnetic suction design on the back and beautiful lines
- Small things solve big problems. One box drives two 12V light bars and three 5V light bars, which is compatible with most RGB connectors on the market. RGB products compatible with 3pin interfaces of major Motherboard
- Note: RGB transfer hub powered by SATA. After connecting the power cord to SATA power supply, 5V ADD-RGB conversion and 12V RGB light can be realized. Neon and breathing mode for some motherboard models are not compatible.
- See more on Amazon...
Brand: XMSJSIY | Manufacturer: Yingtuyou jiaju
Dimensions: 0.47 x 1.73 x 1.73 inches | Weight: 0.11 pounds
See On Amazon #12
EZDIY-FAB RGB Dual Ring 120mm Case Fans,5V Motherboard Sync,Speed Adjustable,RGB Sync Fan with 10-Port Fan Hub X and Remote-5 Pack
Asin: B07XDX8CS5 | Model: US-rgb ring fan with hub X-5P | PartNumber: US-rgb ring fan with hub X-5P
8 Shockproof Pads Ensure That The Fan Will Not Vibrate When It Is Running..
With Ezdiy-Fab Fan Hub X And 21-Key Remote:You Can Instantly Adjusting Led Back-Light Effects, Colors, Brightness And Fan Speed.
Sync Rgb Lighting Via Motherboard:- Must Be Work With An Addressable Rgb(+5V, 3-Pin) Capable Motherboard Or An Addressable Rgb(+5V, 3-Pin) Controller(Please Check The Argb Motherboard Of Your Motherboard Before Purchase!).
9-Fan Blade, Support Speed Regulation, Adjust Brightness, Intelligent Color Matching By Wireless Remote Control..
Features
- 16 Leds with true RGB with 16.8 million colors to light up your build with nearly endless customizable combinations
- 9-fan blade, support speed regulation, adjust brightness, intelligent color matching by wireless remote control.
- 8 shockproof pads ensure that the fan will not vibrate when it is running.
- Sync RGB lighting via motherboard:- MUST BE work with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller(Please check the ARGB motherboard of your motherboard before purchase!)
- With EZDIY-FAB Fan Hub X and 21-key remote:You can instantly adjusting LED back-light effects, colors, brightness and Fan speed
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Dimensions: 4.72 x 4.72 x 0.98 inches
See On Amazon #13
Yakuri Computer Motherboard Extension Cable, 5V Argb 3-Pin Connector Hub, RGB Interface Extension Cable
Asin: B0BP6R7XD8 | Model: 5V 1-1 | PartNumber: 5V 1-1 | Ean: 0768745612505 | UPC: 768745612505
5V 3 Pin Connector: Connector Can Be Plugged Or Unplugged To Switch Between Male And Female..
[100% Risk-Free Purchase]: We Have Perfect After-Sales Service, If There Is Any Problem With The Product, Please Feel Free To Contact Us, We Will Definitely Provide You With Perfect After-Sales Service And The Best Shopping Experience..
Considering That The 3-Pin Connector Is A Consumable Item, We Will Include Extra Connector In Our Package..
Function: 5V 3 Pin Interface Extension Cable, Fan Connection..
Features
- Usage: Computer motherboard RGB interface extension. Cable length 12inch (30cm)
- Function: 5V 3 Pin interface extension cable, fan connection.
- 5V 3 Pin Connector: Connector can be plugged or unplugged to switch between male and female.
- Considering that the 3-pin connector is a consumable item, we will include extra connector in our package.
- [100% risk-free purchase]: We have perfect after-sales service, if there is any problem with the product, please feel free to contact us, we will definitely provide you with perfect after-sales service and the best shopping experience.
- See more on Amazon...
Brand: Yakuri | Manufacturer: Yakuri
Weight: 0.02 pounds
Warranty: 6-month
See On Amazon #14
EZDIY-FAB ARGB LED AIO Tube Sleeve, Soft Dust Free Rubber, Versatile Sizing 12mm Diameter for Water Cooling Tube, Compatible with Aura, RGB Fusion,Mystic Light Sync- 2 Packs, 330mm/13in
Asin: B0B5CNVHND | Model: EZDPI129-3 | PartNumber: EZDPI129-3
12Mm Diameter Argb Tube Sleeve Fits 11-12Mm Diameter Aio Tube To Create A Personal Lighiting System..
One-Year Warranty. Any Questions For Our Ezdiy Product Both Before And After You Place The Order, Contact Us Anytime, We Will Reply You Within 24 Hours..
1 To 2 Splitter Included, You Could Connect Two Led Strips In Series Or In Palleral; Clip Type Connector Interface Keeps Connection Securely..
Soft Rubber Composition For Easy To Assemble With The Shape Of The Cooler Tubes, With Smooth Texture And Not Easy To Get Dust, Smoothly And Clean..
Features
- Fetured lighting effects with 30 ARGB LEDs compatible with Aura, Fusion RGB and Mystic Light app, also works with standard 5V 3Pin ARGB Controller.
- Soft rubber composition for easy to assemble with the shape of the cooler tubes, with smooth texture and not easy to get dust, smoothly and clean.
- 12mm diameter ARGB tube sleeve fits 11-12mm diameter AIO tube to create a personal lighiting system.
- 1 to 2 splitter included, you could connect two led strips in series or in palleral; clip type connector interface keeps connection securely.
- One-Year Warranty. Any questions for our EZDIY Product both before and after you place the order, contact us anytime, we will reply you within 24 hours.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #15
Jstincal 1-to-1 ARGB Extension Cable, 5V 3-pin to JST SM 3Pin Male Adapter Cable, 5V 3-Pin Digital Addressable RGB Extension Cable, 1 to 1 Male ARGB Cable, 11.8 Inches, 2-Pack
Asin: B0CB5JDMGF
Compatible: Only Support +5V 3Pin Digital Addressable Rgb Motherboard Header, Not Compatible With 12V 4-Pin Rgb Header. Make Sure Your Rgb Devices Have 5V 3-Pin Sm Connector..
Function: Argb Extension Cable Allows To Extend And Connect Its Addressable Argb Led Or Argb Fan Through A Single Motherboard +5V 3 Pin Argb Header. Addressable Rgb - Argb Splitter Extension Cable Compatible With 5050/3528 Addressable Rgb Led Strip Lights Or Argb Fans..
Material: Made Of High-Quality Material, Durable, Firm And Not Easy To Break..
Connector: 1 Female 3-Pin To 1 Male Sm 3-Pin. Work Voltage: 5V. Connects Digital Addressable Rgb Lights Or Fans To A Single Source..
Features
- Package Contents: 2PCS 1-to-1 ARGB Extension Cables 5V 3-pin to JST SM 3Pin Male. Cable Length: 30cm / 11.8inches.
- Connector: 1 Female 3-pin to 1 Male SM 3-pin. Work Voltage: 5V. Connects Digital Addressable RGB Lights or Fans to a Single Source.
- Compatible: Only Support +5V 3Pin Digital Addressable RGB Motherboard Header, Not Compatible with 12V 4-Pin RGB Header. Make Sure Your RGB Devices Have 5V 3-Pin SM Connector.
- Material: Made of High-Quality Material, Durable, Firm and Not Easy to Break.
- Function: ARGB Extension Cable Allows to Extend and Connect Its Addressable ARGB LED or ARGB fan Through a Single Motherboard +5V 3 pin ARGB Header. Addressable RGB - ARGB Splitter Extension Cable compatible with 5050/3528 Addressable RGB LED Strip Lights or ARGB Fans.
- See more on Amazon...
Brand: Jstincal | Manufacturer: Jstincal
Dimensions: 0.40 x 11.80 x 0.40 inches
See On Amazon #16
EZDIY-FAB Adapter Cable for Corsair Lighting Node Pro and for Corsair iCUE Commander PRO (hub is not Included), Smart RGB Lighting, Connect to Any 5V 3-Pin ARGB Devices (2 x 20cm)
Asin: B08KGMZ9YT | Model: US-NEW ICUE cable for led strips | PartNumber: US-NEW ICUE cable for led strips
Make Sure Your Rgb Device With 5V 3-Pin Connector.
Warnning: Corsair Hub Is Not Included!!!!!.
Each Adapter Cable 20Cm/7.8 In..
Features
- This adapter could connect to any 5V ARGB devices and controlled by Corsair node ICUE software
- Each adapter cable 20cm/7.8 in.
- Make sure your RGB device with 5V 3-Pin connector
- WARNNING: CORSAIR Hub is not included!!!!!
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #17
CERRXIAN 5V 3PIN ARGB Controller,Built-in Light Mode,SATA Power Supply,for Motherboards Without 5V ARGB,or DIYARGB Fans,ARGB Light Strips,Lighting Boards,Etc
Asin: B0B4V2V49G
Simple Button Design, Simple Operation And Functional Use.
5V 3Pin Argb Controller, The 3-Pin Interface Adopts The Extension Cable Design, Which Is Convenient To Connect And Not Easy To Fall Off. At The Same Time, It Solves The Problem Of Insufficient Wire Length. The 3-Pin Interface Has A Protective Cover To Protect The Needle From Bending And Deformation..
Standard 5V Argb Interface, Compatible With Various Luminous Products With Standard Universal 5V3 Pin Argb Interface On The Market, No Need To Worry About Compatibility Issues.
S Key: Single Click To Switch The Light Conversion Speed, There Are 8 Gears Can Be Switched Cyclically, Long Press The S Key For 4 Seconds To Turn Off The Light, And Then Long Press For 4 Seconds To Turn On The Light.
C Key: Click To Switch To Other Light Colors In The Same Mode Or Make The Light Cycle In Reverse, Long Press The C Key For 5 Seconds To Switch The Light Brightness, A Total Of 6 Levels Of Brightness Can Be Cycled.
M Key: Click To Switch To The Next Lighting Mode, And You Can Cycle To Switch The Controller's Own Lighting Mode.
Exquisite Workmanship, Individual Appearance, Small Body Can Also Play A Big Role, Helping You Create Cool Light Effects.
Argb Controller Has Dozens Of Built-In Lighting Modes, Which Can Realize Manual Control Of Lighting Effects, Such As Monochrome, Trotting Light, Rainbow And Other Modes (Note: This Controller Does Not Support Connecting The Motherboard Software To Control The Light Synchronization).
Features
- ARGB 5v3-pin controller, powered by SATA, does not need the motherboard to support 5V ARGB, you can directly use the power SATA interface to supply power, through the built-in light mode of the controller, you can achieve lighting control for 5v 3-pin ARGB products
- ARGB controller has dozens of built-in lighting modes, which can realize manual control of lighting effects, such as monochrome, trotting light, rainbow and other modes (note: this controller does not support connecting the motherboard software to control the light synchronization)
- Simple button design, simple operation and functional use
- M key: Click to switch to the next lighting mode, and you can cycle to switch the controller's own lighting mode
- S key: Single click to switch the light conversion speed, there are 8 gears can be switched cyclically, long press the S key for 4 seconds to turn off the light, and then long press for 4 seconds to turn on the light
- C key: Click to switch to other light colors in the same mode or make the light cycle in reverse, long press the C key for 5 seconds to switch the light brightness, a total of 6 levels of brightness can be cycled
- 5V 3PIN ARGB Controller, the 3-pin interface adopts the extension cable design, which is convenient to connect and not easy to fall off. At the same time, it solves the problem of insufficient wire length. The 3-pin interface has a protective cover to protect the needle from bending and deformation.
- Standard 5v ARGB interface, compatible with various luminous products with standard universal 5v3 pin ARGB interface on the market, no need to worry about compatibility issues
- Exquisite workmanship, individual appearance, small body can also play a big role, helping you create cool light effects
- See more on Amazon...
Brand: CERRXIAN | Manufacturer: Lemeng
See On Amazon #18
Micro Connectors F04-RGB01-30 30cm RGB Extension Cable
Asin: B07GN1C5L5 | Model: F04-RGB01-30 | PartNumber: F04-RGB01-30 | Ean: 0715860034118 | UPC: 715860034118
Works With 4-Pin Rgb Or 5-Pin Rgbw Header.
Flexible Pvc Material For Easy Routing In Tight Spaces.
Male Pins Included For Convenience.
Compatible With 4-Pin Rgb Led Fans.
Features
- Compatible with 5050/3528 4-pin RGB LED strip lights
- Compatible with 4-pin RGB LED fans
- Works with 4-pin RGB or 5-pin RGBW header
- Male pins included for convenience
- Flexible PVC material for easy routing in tight spaces
- See more on Amazon...
Brand: MICRO CONNECTORS | Manufacturer: Micro Connectors, Inc
Dimensions: 4.72 x 7.87 x 0.39 inches | Weight: 0.02 pounds
Warranty: 1 year
See On Amazon #19
Besvalo ARGB Extension Cable 3 Pin, ARGB Interface Extension Cable, 5 V 3-Pin Connector Hub, 12 Inches, 1-1
Asin: B09PLHCRL8 | Model: EX-CABLE-1-1 | PartNumber: EX-CABLE-1-1 | Ean: 0754407342309 | UPC: 754407342309
5V 3 Pin Connector: Connector Can Be Plugged Or Unplugged To Switch Between Male And Female..
[100% Risk-Free Purchase]: We Have Perfect After-Sales Service, If There Is Any Problem With The Product, Please Feel Free To Contact Us, We Will Definitely Provide You With Perfect After-Sales Service And The Best Shopping Experience..
Considering That The 3-Pin Connector Is A Consumable Item, We Will Include Extra Connector In Our Package..
Extension Cable Function: 5V 3 Pin Interface Extension Cable, Fan Connection..
Features
- Usage: Computer motherboard RGB interface extension. Cable length 12inch (30cm)
- Extension Cable Function: 5V 3 Pin interface extension cable, fan connection.
- 5V 3 Pin Connector: Connector can be plugged or unplugged to switch between male and female.
- Considering that the 3-pin connector is a consumable item, we will include extra connector in our package.
- [100% risk-free purchase]: We have perfect after-sales service, if there is any problem with the product, please feel free to contact us, we will definitely provide you with perfect after-sales service and the best shopping experience.
- See more on Amazon...
Brand: Besvalo | Manufacturer: Besvalo
Weight: 0.02 pounds
See On Amazon
Looking For Something Else?
Search