2800rpm 500W Wet Model Trimmer Wet Abrasive Machine Abrasive Gypsum Arch Inner Disc Wheel Lab Equipment US Stock 110V/60Hz
Asin: B0834SM17V | Ean: 0734830734551 | UPC: 734830734551
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3. Connect The Power Cord, And Switch On The Power Switch (O=Off, L=On).
5. To Check If You Need To Replace The Abrasive Disk, Rotate The Disk By Hand And Estimate: If The Platform Jumps More Than 2Mm, Change The Disk. After Replacing The Disk, Make Sure To Tighten The Ring On The Platform 8 (Closest To The Outside Of The Sand Tablet).
4. When Braking, It Is Normal To Hear Clicking Before The Sand Tablet Stops. If The Sand Tablet Makes Unusually Loud Noises, Remove It, And Use The Included Hex-Wrench To Adjust The Screw On The Back Cover (18).
2. Connect The Waste-Disposal Tube To The Unit.
Features
- 1.Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
- 2. Connect the waste-disposal tube to the unit
- 3. Connect the power cord, and switch on the power switch (O=off, l=on)
- 4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
- 5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
- See more on Amazon...
Brand: LiFuJunDong | Manufacturer: LiFuJunDong
Dimensions: 15.75 x 18.50 x 15.75 inches
See On Amazon Similar To 2800rpm 500W Wet Model Trimmer
#1
JT-19 D ental Wet Model Trimmer 2800rpm Abrasive Gypsum Arch Inner Disc Wheel Gypsum Dressing Machine Gypsum Sanding Machine 110V
Asin: B01MPZD5Y9 | Ean: 0738631520405 | UPC: 738631520405
3. Tighten All Connecting Screws Of The Machine To Prevent Loosening. 4. Turn On The Power, Observe Whether The Motor Has Abnormal Noise, Whether The Sand Piece Rotates Smoothly, If There Is Any Abnormality, Stop Immediately And Overhaul..
6. The Angle Adjustment Of The Sander Is Light And Flexible, <30 Degrees, It Can Be Polished To Different Angles From 75 Degrees To 105 Degrees. ..
5. Observe Whether The Water Supply Has The Function Of Removing Dust And Adhering Gypsum Powder On The Sand. If The Effect Is Not Good, Adjust The Water Pressure..
2. Tighten The Water Inlet Pipe And The Connector First To Avoid Falling Off And Splash The Water Into The Motor To Burn The Motor..
Features
- 1. Fix the plaster trimmer on the workbench first, and tighten the four anchor screws to avoid vibration.
- 2. Tighten the water inlet pipe and the connector first to avoid falling off and splash the water into the motor to burn the motor.
- 3. Tighten all connecting screws of the machine to prevent loosening. 4. Turn on the power, observe whether the motor has abnormal noise, whether the sand piece rotates smoothly, if there is any abnormality, stop immediately and overhaul.
- 5. Observe whether the water supply has the function of removing dust and adhering gypsum powder on the sand. If the effect is not good, adjust the water pressure.
- 6. The angle adjustment of the sander is light and flexible, <30 degrees, it can be polished to different angles from 75 degrees to 105 degrees. .
- See more on Amazon...
Brand: LiFuJunDong | Manufacturer: LiFuJunDong
See On Amazon #2
RustyVioum JT-19 500W Dental Wet Model Trimmer, Gypsum Abrasive Trimmer, Disc Gypsum Arch Machine 2800rpm, Trimming Plaster Gypsum Model Equipment
Asin: B0CDPP9WFH | Model: JT-19 500W Dental Wet Model Trimmer | PartNumber: JT-19 500W Dental Wet Model Trimmer
【Grinding Water Or Dry】The Trimmer Can Be Transformed Working Water Dry Work, But Work In Water Is Recommended..
【Lose Noise】The Wet Model Trimmer Lab Disc Bore Prevents Noise And Vibration. Don't Worry About Disturbing The Others..
【Easy To Operation And Clean】Outer Shapes Are Round, Easy To Clean. Wide Gradient And Sloping Work Table.Window Full Screen. Cleaning Size Can Work In 3 Different Angles, You Can Adjust The Screws..
【Stable】The Model Trimmer Dental More Than 20Kg Mounted On Non-Slip Feet..
Features
- Powerful The jt19 dental wet model trimmer with 500W engine. Constant size and performance without fatigue.
- Stable The model trimmer dental More than 20kg Mounted on non-slip feet.
- Grinding water or dry The trimmer can be transformed working water dry work, but work in water is recommended.
- Easy to operation and clean Outer shapes are round, easy to clean. Wide gradient and sloping work table.Window full screen. Cleaning size can work in 3 different angles, you can adjust the screws.
- Lose noise The wet model trimmer lab Disc bore prevents noise and vibration. Don't worry about disturbing the others.
- See more on Amazon...
Brand: RustyVioum | Manufacturer: RustyVioum
See On Amazon #3
PIAOCAIYIN JT-19 Dental Wet Model Trimmer, 500W 2800rpm Disc Gypsum Arch Machine, Silent Abrasive Disc Wheel Equipment Gypsum Arch, w/Adjust Screws
Asin: B0CS984YZJ | Model: JT-19 Dental Wet Model Trimmer | PartNumber: JT-19 Dental Wet Model Trimmer
【User-Friendly Design】Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment Has A Round Shape Making It Easy To Clean, Can Work At 3 Different Angles For Cleaning Work. The Wide Sloping And Tilting Table Is Displayed In A Window With A Full Screen For Easy Operation And Use, And It Can Also Be Adjusted With Screws..
【Please Note】The Trimmer Can Work In Abrasive Water Or Dry. It Can Also Work Under Dry Water, But We Strongly Recommend Working Under Water..
【Low Noise】The Valve Hole Prevents Noise And Vibration When The Machine Is Running, Providing You With A Quieter Working Environment..
【Main Parameters】Voltage: ＜A＞220V/50Hz±10%, Power: 500W Speed: 2800 Rpm, Flap Diameter: For 23.5-32Cm/9 Inch-12.5 Inch..
Features
- Superior Performance Dental wet model trimmer is made of high-quality metal and comes with up to 500W engine for powerful operation. It achieves a high speed of 2800 rpm for easy slicing. Weighing more than 20 kilograms, it can be mounted on non-slip feet for stable operation.
- Main Parameters Voltage: A 220V/50Hz 10%, Power: 500W Speed: 2800 rpm, Flap Diameter: For 23.5-32cm/9 inch-12.5 inch.
- User-Friendly Design Wet model trimmer abrasive disc wheel dental lab equipment has a round shape making it easy to clean, can work at 3 different angles for cleaning work. The wide sloping and tilting table is displayed in a window with a full screen for easy operation and use, and it can also be adjusted with screws.
- Low Noise The valve hole prevents noise and vibration when the machine is running, providing you with a quieter working environment.
- Please Note The trimmer can work in abrasive water or dry. It can also work under dry water, but we strongly recommend working under water.
- See more on Amazon...
Brand: PIAOCAIYIN | Manufacturer: PIAOCAIYIN
See On Amazon #4
2800rpm Wet Model Trimmer Wet Abrasive Machine Abrasive Gypsum Arch Inner Disc Wheel Lab Equipment 110V/60Hz 500W JT-19
Asin: B08BF8TGY7 | Ean: 0738630101636 | UPC: 738630101636
▲When Braking, It Is Normal To Hear Clicking Before The Sand Tablet Stops. If The Sand Tablet Makes Unusually Loud Noises, Remove It, And Use The Included Hex-Wrench To Adjust The Screw On The Back Cover (18).
▲100% Satisfaction Guarantee - 7×24 Online Support, Just Let Us Know If You Have Any Issues With The Items..
▲To Check If You Need To Replace The Abrasive Disk, Rotate The Disk By Hand And Estimate: If The Platform Jumps More Than 2Mm, Change The Disk. After Replacing The Disk, Make Sure To Tighten The Ring On The Platform 8 (Closest To The Outside Of The Sand Tablet).
▲Connect The Power Cord, And Switch On The Power Switch (O=Off, L=On).
Features
- Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve;This powerful trimmer comes with low noise Connect the waste-disposal tube to the unit
- Connect the power cord, and switch on the power switch (O=off, l=on)
- When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
- To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
- 100% Satisfaction Guarantee - 7 24 Online support, just let us know if you have any issues with the items.
- See more on Amazon...
Brand: VPABES | Manufacturer: VPABES
Weight: 43.20 Pounds
See On Amazon #5
TFCFL Wet Model Trimmer Wet Abrasive Machine Abrasive Gypsum Arch Inner Disc Wheel Lab Equipment US Stock 110V/60Hz 2800rpm 500W Cut-Off Wheels
Asin: B08764NGZP | Ean: 0738627893841 | UPC: 738627893841
[Package Contents] 1X Jt-19 Wet Model Trimmer Abrasive Disc Wheel Lab Equipment..
[Product Warranty] My Dear Customer We Shipped Goods From Ca Or Nj Warehouse,It Will Be Needs About 3-5Days To Arrive At Your Place,If You Have Any Confused Please Email To Us Anytime..
[Warm Note] To Check If You Need To Replace The Abrasive Disk, Rotate The Disk By Hand And Estimate: If The Platform Jumps More Than 2Mm, Change The Disk. After Replacing The Disk, Make Sure To Tighten The Ring On The Platform 8 (Closest To The Outside Of The Sand Tablet)..
[How To Deal With It] ① Change The Fuse（22） Which Inside The Socket；② Change The Motor ③ Change The Switch..
Features
- [MAIN PARAMETER] Voltage: 110V/60Hz;Power: 500W Rotational Speed: 2800 rpm;Dimensions: 44 35 35cm Weight of the dental trimmer: 20kg.
- [HOW TO DEAL WITH IT] change the fuse 22 which inside the socket change the motor change the switch.
- [PACKAGE CONTENTS] 1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Lab Equipment.
- [WARM NOTE] To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet).
- [PRODUCT WARRANTY] My dear customer we shipped goods from CA or NJ warehouse,it will be needs about 3-5days to arrive at your place,if you have any confused please email to us anytime.
- See more on Amazon...
Brand: TFCFL | Manufacturer: KAHE
See On Amazon
Looking For Something Else?
Search