Outboard Trim/Tilt Pin Wrench MT0004-38mm x 4mm, Remove Hydraulic Cylinders Trim Tilt Caps, fit for all Seastar Steering Cylinders, for Yamaha 4 Stroke V6
Asin: B083JW8YNB | Model: SL-004 | PartNumber: SL-004 | Ean: 7427046759236
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.A Must Have--Usually, You Will Put A Little Drift Into One Of Those Holes In The Trim And Tilt Caps With A Hammer. Than,You Destroy These Cap ,You Will Thrown Them Away,Which Cost A About Hundred Bucks. So, You Really Need The Pin Wrench To Help You Finish That Case With Ease.
Satisfaction Guarantee: If You're Not 100% Satisfied With This Pin Wrench Mt0004, Simply Return It For A Full Refund In 30 Days, Guarantee With 12 Months’ Warranty.
High Quality Material--Made Of High Hardened 4140 Impact Grade Steel,With Silver Oxide Coating Which Is Rust-Resistance , No Defromantion And Durable To Use..
Function--To Rebuild A Leaked Device On Outboard Engine, Hydraulic Trim And Tilt Unit .Used To Remove And Install The Trim And Tilt Caps Without Damages And Protect The Steering Cylinder.
Features
- Application--Fits for all Seastar Steering Cylinders, Trim and Tilt Caps on all Four Stroke Yamaha V6, Trim and Tilt Caps on Non-VMAX 2 Strokes (225-300hp), and Tilt Caps on the 2011-Current F150. This wrench is not compatible with VMAX.
- Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damages and protect the steering cylinder
- A Must Have--Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease
- High Quality Material--Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance , no defromantion and durable to use.
- Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0004, simply return it for a full refund in 30 days, guarantee with 12 months warranty
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
Dimensions: 50.00 x 100.00 x 100.00 Centimeters
See On Amazon Similar To Outboard Trim Tilt Pin Wrench
#1
Marine Tech Tools 32mm Yamaha Tilt Trim Spanner Wrench (AMT0006), Outboard Trim Tilt Pin Wrench, Boat Tool, Trim Caps fit all SHOWA manufactured Units, Yamaha, Honda, Evinrude
Asin: B017KTYA86 | Model: AMT0006 | PartNumber: AMT0006 | Ean: 0019962666339 | UPC: 019962666339
🔧 Easy Diy Trim, Tilt, Or Steering Cap Removal System — Don’T Wait For A Marine Dealer To Fix Your Boat. This 32Mm Pin Wrench Will Make It A Breeze In Removing Trim/Tilt - Resolving Leaking Issues Fast And Easy..
🔧 Built To Last Pin Wrenches With Lifetime Warranty — As A Small Business Located In Charleston, South Carolina, Usa, We Take Pride In All Our Products. We Spent Years Of Testing And Product Development To Create Marine Repair And Maintenance Tools That Will Last, Backed With A Lifetime Warranty..
🔧 Built & Develop With A Mission — We Are Our Own Customers. We Create Our Tools And Use Them For Our Boats. We Understand The Marine Repair And Maintenance Needs Of Our Customers. Today, We Are On A Mission To Support Boat Owners And Mechanics In Their Boating Lifestyle Through The Tools We Create, Like This Marine Trim-Tilt Hydraulic 32Mm Pin Wrench..
🔧 Stronger Premium Quality Pins — Our Pins Are The Product Of A Proprietary Selection Of Materials And Heat Treatment Providing The Toughest Pins Available. Designed To Withstand Over 200 Ft-Lb When Installed In Our Wrenches.
Features
- Applications and Inclusions The kit comes with the following: 32 mm marine pin wrench, six S-4mm pins, and six S4.5mm pins. This pin wrench is a new and improved design with 4 pins to engage the caps and prevent breakage. The trim wrench fits all SHOWA-manufactured Trim/Tilt Units on Yamaha, Honda, and Evinrude. For more details, check the Pin Wrench Chart (6th image).
- Stronger Premium Quality Pins Our pins are the product of a proprietary selection of materials and heat treatment providing the toughest pins available. Designed to withstand over 200 ft-lb when installed in our wrenches
- Easy DIY Trim, Tilt, or Steering Cap Removal System Don t wait for a marine dealer to fix your boat. This 32mm pin wrench will make it a breeze in removing trim/tilt - resolving leaking issues fast and easy.
- Built & Develop with a Mission We are our own customers. We create our tools and use them for our boats. We understand the marine repair and maintenance needs of our customers. Today, we are on a mission to support boat owners and mechanics in their boating lifestyle through the tools we create, like this marine trim-tilt hydraulic 32mm pin wrench.
- Built to Last Pin Wrenches with Lifetime Warranty As a small business located in Charleston, South Carolina, USA, we take pride in all our products. We spent years of testing and product development to create marine repair and maintenance tools that will last, backed with a lifetime warranty.
- See more on Amazon...
Brand: M Marine Tech Tools | Manufacturer: M Marine Tech Tools
Dimensions: 50.00 x 100.00 x 100.00 Centimeters | Weight: 0.20 pounds
See On Amazon #2
LEFVNPETS Grinder Wrench Adjustable Pin Spanner Wrench Angle Grinder Lock-Nut Wrench For Grinders (A)
Asin: B07FPGVXTQ | Model: M-02 | PartNumber: M-02 | Ean: 0750440689722 | UPC: 750440689722
Pin Spanner Wrench Design: Pin Wrench Easy Twist Knob Adjustment, Heat Treated Pins For Long Lasting And Strong Grip And Rubber Dipped Handle Grip For Comfort.
Note: Universal Adjustable Grinding Wrench Is Suitable For 4-Inch, 5-Inch, 6-Inch, 7-Inch And 9-Inch Angle Grinder..
Grinder Wrench Size: Width:40Mm; Overall Length:190Mm. Opening Size：1/2"-1.6" Adjust The Tightness Of The Nut On The Wrench To Adjust The Size..
Pin Wrench Fit Modle: Suits Most Grinders And Lock Nuts. Ideal Replacement Pin Wrench For All Angle Grinders, Bench Grinders, Circular Saws, And Mitre Saws Etc.
Features
- Pin Spanner Wrench Main Using: The adjustable pin wrench is for use with locknuts on angle grinders when fitting or removing abrasive discs
- Pin Wrench Fit Modle: Suits most grinders and Lock nuts. Ideal Replacement Pin Wrench For All Angle Grinders, Bench Grinders, Circular Saws, and Mitre Saws etc
- Pin Spanner Wrench Design: Pin Wrench Easy twist knob adjustment, Heat treated pins for long lasting and strong grip and rubber dipped handle grip for comfort
- Grinder Wrench Size: Width:40mm; Overall Length:190mm. Opening size 1/2-1.6 Adjust the tightness of the nut on the wrench to adjust the size.
- Note: Universal adjustable grinding wrench is suitable for 4-inch, 5-inch, 6-inch, 7-inch and 9-inch angle grinder.
- See more on Amazon...
Brand: Yunpo | Manufacturer: Yunpo tech
Dimensions: 0.50 x 3.50 x 1.50 inches
See On Amazon #3
Rhino Gland Nut Wrench - Set of 2 Hydraulic Cylinder Spanner Wrench Adjustable - Spanner Wrench Set Includes Gloves, Microfiber Towel, Pins & Allen Wrenches, Suitable for Farm & Construction Equipment
Asin: B0BNL4F5KL | Model: GNW | PartNumber: GNW
Ultra-Durable - This Gland Nut Wrench Is Made Of Professional-Grade Carbon Steel And Features A Rugged Coating, Making It Ultra-Durable And One Of The Best Hydraulic Cylinder Tools. The Sturdy Washer In The Hinging Area Keeps The Nut Wrench In Shape, Preventing It From Slipping Or Moving During Use..
Accessories - The Wrench Nut Set Includes A Large Wrench, A Thin Adjustable Wrench, Pair Of Gloves, A Microfiber Towel, Four Hex Wrenches, Eight Pins, And Detailed Instructions. It Has Everything Needed For A Heavy-Duty Job, Making It The Perfect Wrench Set For Professionals..
Secure Pins - Our Gland Nut Wrench Is Designed To Securely Hold Onto Pins And Ensure They Do Not Get Lost. The Pins Have Been Modified With Holes/Slots Drilled Into The Sides, Making It Easy To Keep Them In Place..
Highly Compatible - Designed To Fit Gland Nuts On Hydraulic Cylinders, It Is Compatible With Nuts On Most Farm Machinery, Such As Agricultural Loaders, Compact Tractors, And Other Heavy Equipment. They Almost Feel Like Hydraulic Wrenches Due To Their Compatibility And Ease Of Access..
Extreme Leverage - Our Pin Spanner Wrench Features A Square Breaker Bar Slot That Provides Extreme Leverage, Providing Extra Strength To Remove The Toughest Gland Nuts. Its Easy-Grip Design Ensures Secure Handling, Allowing You To Work With Confidence..
Features
- SET OF 2 WRENCHES - The large adjustable wrench has a 0.75" drive and a range of 2" to 6", and the small universal wrench has a 0.5" drive and adjustable range of 1" to 3.75" gland nuts, meaning this set is ideal for numerous industrial tasks. These wrenches are similar to an adjustable spanner wrench.
- EXTREME LEVERAGE - Our pin spanner wrench features a square breaker bar slot that provides extreme leverage, providing extra strength to remove the toughest gland nuts. Its easy-grip design ensures secure handling, allowing you to work with confidence.
- ULTRA-DURABLE - This gland nut wrench is made of professional-grade carbon steel and features a rugged coating, making it ultra-durable and one of the best hydraulic cylinder tools. The sturdy washer in the hinging area keeps the nut wrench in shape, preventing it from slipping or moving during use.
- HIGHLY COMPATIBLE - Designed to fit gland nuts on hydraulic cylinders, it is compatible with nuts on most farm machinery, such as agricultural loaders, compact tractors, and other heavy equipment. They almost feel like hydraulic wrenches due to their compatibility and ease of access.
- ACCESSORIES - The wrench nut set includes a large wrench, a thin adjustable wrench, pair of gloves, a microfiber towel, four hex wrenches, eight pins, and detailed instructions. It has everything needed for a heavy-duty job, making it the perfect wrench set for professionals.
- SECURE PINS - Our gland nut wrench is designed to securely hold onto pins and ensure they do not get lost. The pins have been modified with holes/slots drilled into the sides, making it easy to keep them in place.
- See more on Amazon...
Brand: Eleon | Manufacturer: Eleon
See On Amazon #4
Trim/Tilt Pin Wrench MT0006-32mm x 4/4.5mm Remove Trim/Tilt Caps on Hydraulic Cylinders Compatible for Yamaha Suzuki Johnson Evinrude, for Honda Outboards
Asin: B096SHCW22
A Must Have--Usually, You Will Put A Little Drift Into One Of Those Holes In The Trim And Tilt Caps With A Hammer. Than,You Destroy These Cap ,You Will Thrown Them Away,Which Cost A About Hundred Bucks. So, You Really Need The Pin Wrench To Help You Finish That Case With Ease.
Satisfaction Guarantee: If You're Not 100% Satisfied With This Pin Wrench Mt0006, Simply Return It For A Full Refund In 30 Days, Guarantee With 12 Months’ Warranty.
High Quality Material--Made Of High Hardened 4140 Impact Grade Steel,With Silver Oxide Coating Which Is Rust-Resistance And Durable To Use.Better Than Oem..
Function--To Rebuild A Leaked Device On Outboard Engine, Hydraulic Trim And Tilt Unit .Used To Remove And Install The Trim And Tilt Caps Without Damaging It And The Steering Cylinder.
Features
- Application--for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units,All Suzuki, Honda,Johnson, Evinrude,ALL Yamaha I4 2.8L (F175-F200),ALL Yamaha VMAX,Yamaha F115-F150,Yamaha 2-Strokes (115-225hp)
- Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
- A Must Have--Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease
- High Quality Material--Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use.Better than OEM.
- Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0006, simply return it for a full refund in 30 days, guarantee with 12 months warranty
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #5
Sunluway Bearing Retainer Spanner Wrench & Carrier Retainer Nut Wrench Tool fits for Mercruiser Alpha 1, Gne2, Bravo 1, Replace 90100, 91-61069
Asin: B091SRQ7NT | Model: SL-91-17256+ 91-61069 | PartNumber: SL-91-17256+ 91-61069 | Ean: 0641197113984 | UPC: 641197113984
【Bearing Carrier Retainer Nut Wrench】Used To Remove And Install Bearing Carrier Retainer Nuts On On Bravo One, Mc-1, R-Mr, Alpha One/Gen Two, Trs Drive Units And Outboards.Removes 4-3/8" Retainer Nut. Not Fit For Bravo 2, 3, Xr, Or Tr..
【Satisfaction Guarantee】 If You're Not 100% Satisfied With This Tool, Simply Return It For A Full Refund In 30 Days, Guarantee With 12 Months’ Warranty..
【Bearing Retainer Spanner Wrench】 Used To Remove And Install Drive Shaft Housing (Upper) Bearing Retainer Nut (By U Joint Shaft) On #1 (1982 And Earlier), R, Mr, Alpha Gen 1 (1983 -1990), Alpha Generation Ll (All), Mc1, And All Bravo And Blackhawk Units.
【Material】Both Are Made Of High Standard Carbon Steel With Black Finish, Great Strength And Durability,Anti-Corrosion &No Deformation..
Features
- Application Fits for all mercruiser Alpha one, Alpha One Gen Two, Pre Alpha, Bravo One, Trs outdrives will also fit for Mercury / for Mariner outboards 150HP and up.
- Material Both are made of High Standard Carbon Steel with Black Finish, Great Strength and Durability,Anti-Corrosion &No Deformation.
- Bearing Carrier Retainer Nut Wrench Used to remove and install bearing carrier retainer nuts on on Bravo One, MC-1, R-MR, Alpha One/Gen Two, TRS drive units and outboards.Removes 4-3/8 retainer nut. Not fit for Bravo 2, 3, XR, or TR.
- Bearing Retainer Spanner Wrench Used to remove and install drive shaft housing (upper) bearing retainer nut (By U joint shaft) on #1 (1982 and earlier), R, MR, Alpha Gen 1 (1983 -1990), Alpha Generation ll (all), MC1, and all Bravo and Blackhawk units
- Satisfaction Guarantee If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, guarantee with 12 months warranty.
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #6
Sunluway 7463 Small Universal Gland Nut Wrench Hydraulic Cylinder Spanner Wrench on Most Farm and Construction Equipment, Remove 1" to 3.75" Gland Nut
Asin: B081CXLYGG | Ean: 7427046748131
Nice Design-- 7463 Hydraulic Cylinders Spanner Wrench Tool Customized Fits To Small Gland Nuts Ranging From 1" – 3.75" Pin To Pin. Pins Are Reversible To Use On 1/4" Or 7/32" In Diameter Pinholes..
Satisfaction Guarantee: If You're Not 100% Satisfied With This 7463 Gland Nut Wrench, Simply Return It For A Full Refund In 30 Days, Guarantee With 12 Months’ Warranty..
Easy To Use--Work With 1/2" Drive Ratchet. Adjusting Distance Of Both Pins Makes Pin Line Up With The Hole, Then Work With 1/2" Breaker Bar To Loose And Remove Gland Nut. This Job Is Finished Only With A Little Patience..
High Quality Material--Made Of High Quality-42Crmo Steel To Ensure Anti-Corrosion And Rust, Protection And Years Of Trouble-Free Use, Also Show Superior Durability And Impact Resistance..
Features
- Application--Designed to remove gland nut on many hydraulic cylinders typically found on agricultural loaders, compact tractor loaders, and skid steer loaders,like Case. Also used to remove some outboard trim cap , like for Mercruiser Alpha equipments.
- High Quality Material--Made of high quality-42CrMo Steel to ensure anti-corrosion and rust, protection and years of trouble-free use, also show superior durability and impact resistance.
- Nice Design-- 7463 Hydraulic Cylinders Spanner Wrench Tool customized fits to small gland nuts ranging from 1 3.75 pin to pin. Pins are reversible to use on 1/4 or 7/32 in diameter pinholes.
- Easy to use--Work with 1/2 drive ratchet. Adjusting distance of both pins makes pin line up with the hole, then work with 1/2 breaker bar to loose and remove gland nut. This job is finished only with a little patience.
- Satisfaction Guarantee: If you're not 100% satisfied with this 7463 gland nut wrench, simply return it for a full refund in 30 days, guarantee with 12 months warranty.
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #7
432453 Outboard Tilt Pin Assembly Fit for 1980-1990 Johnson Evinrude Outboards 4/4.5/6/7.5/8/9.9/14/15 HP Replace for 0432453 0389835 0334470 0390441 0334469 778197
Asin: B09KN6ZD36
Perfect Performance: Tilt Pin Is An Important Safety Mechanism To Protect Your Outboard Motor From Damage, If The Propellor Hits Something Hard, The Pin Will Shear Rather Than Damaging Components Of Your Motor And Gearbox..
Satisfaction Guarantee: Yoursme Aims To Provide The Best Service For Our Customer And Built To Provide Exceptional Levels Of Durability, If You're Not 100% Satisfied With Our Item, Simply Return It For A Full Refund In 30 Days. We Support 12 Months’ Warranty. If You Have Any Problems About Our Products, Please Feel Free To Contact Us..
Premuim Material: Made Of Heavy-Duty Steel With Black Powder Coated For Professional Level Reliability And Durability, Ensuring Corrosion, Rust And Impact Resistance, Providing A Long-Term Service..
Replacament Part Number: Directly Replace Oem Part Number 0432453 0389835 0334470 0390441 0334469..
Features
- APPLICATION: Fits for Johnson Evinrude Outboards 4HP 1980-1985, 1989-1990; for 4.5HP 1984-1990; for 6HP 1980-1983, 1989; for 7.5HP 1984-1990; for 8HP 1980-1983, 1989; for 9.9HP 1980, 1989-1990; for 14HP 1980-1987, 1990; for 15HP 1980, 1989-1990. (Please confirm whether your model is suitable before buying.)
- REPLACAMENT PART NUMBER: Directly replace OEM part number 0432453 0389835 0334470 0390441 0334469.
- PERFECT PERFORMANCE: Tilt pin is an important safety mechanism to protect your outboard motor from damage, if the propellor hits something hard, the pin will shear rather than damaging components of your motor and gearbox.
- PREMUIM MATERIAL: Made of heavy-duty steel with black powder coated for professional level reliability and durability, ensuring corrosion, rust and impact resistance, providing a long-term service.
- SATISFACTION GUARANTEE: Yoursme aims to provide the best service for our customer and built to provide exceptional levels of durability, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 months Warranty. If you have any problems about our products, please feel free to contact us.
- See more on Amazon...
Brand: Yoursme | Manufacturer: Yoursme
See On Amazon #8
Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4mm for Yamaha Suzuki Johnson Evinrude Honda Outboards Remove Trim/Tilt Caps, Trim Seals on Hydraulic Cylinders
Asin: B083J6XBV9 | Ean: 7426999807742
Strength: Trim And Tilt Hydraulic Pin Wrench. Min Pin Strength 180 Ft-Lb..
Material: Made Of High Quality-42Crmo Steel To Ensure Resistance To Corrosion And Rust, Protection And Years Of Trouble-Free Use, Also Show Superior Durability And Impact Resistance. Guarantee With 12 Months' Warranty..
Package: 1/2" Socket Drive, Pin Wrench With A Size Of 32Mm X 4Mm/4.5Mm.
Replacement: Equivalent For Yamaha Factory Toosl Yb-06175-1A, Yb-06548, Replacement Pins Mt0005 - S-4Mm/4.5Mm.
Features
- COMPATIBILITY : Fit for all SHOWA manufactured Trim/Tilt Units, for Yamaha F115-F150, for all Yamaha I4 2.8L (F175-F200), for Yamaha 2-Strokes (115-225hp), for all Yamaha VMAX, for all Suzuki Honda Johnson Evinrude.
- REPLACEMENT: Equivalent for Yamaha Factory Toosl YB-06175-1A, YB-06548, Replacement Pins MT0005 - S-4mm/4.5mm
- STRENGTH: Trim and Tilt hydraulic pin wrench. MIN Pin Strength 180 ft-lb.
- PACKAGE: 1/2 socket drive, Pin Wrench with a size of 32mm x 4mm/4.5mm
- MATERIAL: Made of high quality-42CrMo Steel to ensure resistance to corrosion and rust, protection and years of trouble-free use, also show superior durability and impact resistance. Guarantee with 12 months' warranty.
- See more on Amazon...
Brand: Yoursme | Manufacturer: Yoursme
See On Amazon #9
PQY Outboard Trim Tilt Pin Wrench Tools Set MT0004 & MT0006 & MT0009 Compatible with Yamaha Suzuki Johnson Evinrude
Asin: B0CQVHFWGS | Model: RKV04 | PartNumber: RKV04
The Pin Wrench Is Made Of High Quality 42Crmo Steel . You Can Remove Trim Or Steering Caps Without Damage By The Tool..
Package Include:3× Pin Wrench With Pins（Mt0004(38Mm X 4Mm), Mt0006(32Mm X 4Mm/4.5Mm) And Mt0009(35Mm X 6Mm). Work With A Torque Wrench For Proper Installation..
Strength Of Mt0004 & Mt0006 Min Pin Strength Is 180 Ft-Lb, Strength Of Mt0009 Min Pin Is 200 Ft-Lb. Replace Original Oem Part Number : Yb-06175-2B, Yb-06175-1A, Yb-06548..
Features
- WIDE APPLICATION:Comptible with all Yamaha Suzuki Johnson Evinrude Hydraulic Trim/Tilt End caps.Comptible with All Seastar Hydraulic Steering End Caps.
- Strength of MT0004 & MT0006 MIN Pin Strength is 180 ft-lb, Strength of MT0009 MIN Pin is 200 ft-lb. Replace original oem part number : YB-06175-2B, YB-06175-1A, YB-06548.
- The pin wrench is made of high quality 42CrMo Steel . You can remove trim or steering caps without damage by the tool.
- Package include:3 Pin Wrench with pins MT0004(38mm x 4mm), MT0006(32mm x 4mm/4.5mm) and MT0009(35mm x 6mm). Work with a torque wrench for proper installation.
- See more on Amazon...
Brand: PQY | Manufacturer: PQY
Warranty: 1 year warranty
See On Amazon #10
Marine Tech Tools 38mm Pin Wrench (AMT0004) with L-4 Pins, Fits Seastar Steering Cylinders, Four Stroke Yamaha V6 & Non-VMAX 2 Strokes Trim Tilt Caps & 2011-Current F150 Tilt Caps
Asin: B017KT4F4A | Model: 5 | PartNumber: 5 | Ean: 0019962666230 | UPC: 019962666230
🔧 Easy Diy Trim, Tilt, Or Steering Cap Removal System — Don’T Wait For A Marine Dealer To Fix Your Boat. This 38Mm Pin Wrench Will Give Make It A Breeze In Removing Trim, Tilt, Or Steering Caps - Resolving The Leaking Issues Fast And Easy..
🔧 Built To Last Pin Wrenches With Lifetime Warranty — As A Small Business Located In Charleston, South Carolina, Usa, We Take Pride In All Our Products. We Spent Years Of Testing And Product Development To Create Marine Repair And Maintenance Tools That Will Last For Years Backed With A Lifetime Warranty..
🔧 Built & Develop With A Mission — We Are Our Own Customers. We Create Our Tools And Use Them For Our Boats. We Understand The Marine Repair And Maintenance Needs Of Our Customers. Today, We Are On A Mission To Support Boat Owners And Mechanics In Their Boating Lifestyle Through The Tools We Create, Like This Marine Trim-Tilt Hydraulic 38Mm Pin Wrench..
🔧 Stronger Premium Quality Pins — Our Pins Are The Product Of A Proprietary Selection Of Materials And Heat Treatment Providing The Toughest Pins Available. Designed To Withstand Over 200 Ft-Lb When Installed In Our Wrenches.
Features
- Applications and Inclusions The kit comes with a 38mm pin wrench and six L-4mm pins. This pin wrench fits all Seastar Steering Cylinders, Trim and Tilt Caps on all Four Stroke Yamaha V6, Non-VMAX 2 Strokes (225-300hp), and Tilt Caps on the 2011-Current F150. This wrench is not compatible with VMAX. For more details, check on the Pin Wrench Application chart (6th image). Our tools are made of professional quality polished stainless steel. Designed and assembled in the USA.
- Stronger Premium Quality Pins Our pins are the product of a proprietary selection of materials and heat treatment providing the toughest pins available. Designed to withstand over 200 ft-lb when installed in our wrenches
- Easy DIY Trim, Tilt, or Steering Cap Removal System Don t wait for a marine dealer to fix your boat. This 38mm pin wrench will give make it a breeze in removing trim, tilt, or steering caps - resolving the leaking issues fast and easy.
- Built & Develop with a Mission We are our own customers. We create our tools and use them for our boats. We understand the marine repair and maintenance needs of our customers. Today, we are on a mission to support boat owners and mechanics in their boating lifestyle through the tools we create, like this marine trim-tilt hydraulic 38mm pin wrench.
- Built to Last Pin Wrenches with Lifetime Warranty As a small business located in Charleston, South Carolina, USA, we take pride in all our products. We spent years of testing and product development to create marine repair and maintenance tools that will last for years backed with a lifetime warranty.
- See more on Amazon...
Brand: M Marine Tech Tools | Manufacturer: Marine Tech Tools
Weight: 0.24 pounds
See On Amazon
Looking For Something Else?
Search