AURSINC NanoVNA-H4 Vector Network Analyzer, Lastest V4.3 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Nanovna Antenna Analyzer Ham Radio, Measuring S Parameters, SWR, Phase, Delay, Smith Chart
Asin: B083PQ4RXZ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✔️[Antenna Performance Measurement] The Default Firmware Main Function For Vector Network Analyzer Is Used For Antenna Performance Measurement. It Has Good Rf Performance For S-Parameter Measurements As Previous Models. Note: The Nanovna Is Only Compatible With The Low-Speed And Supports Spi Mode Sd Cards For Now. It Is Very Efficient Vector Testing For Ham Radio Operator, Research Electrical Engineer And Antenna Builders.
✔️[What Are Included] Nanovna-H4 Host (With 1950Mah Battery) X1, Usb Type-C Data Cable X1, 30Cm/11.8Inch Sma Male To Male Rg174 Rf Cable X2, Sma Simple Calibration Kit (Open/Load/Short) X1, Sma Female To Female Connector X1, Lanyard With Stylus X1, Stylus Pen X1.
✔️[Pc & Android Control] Using Pc Software Nanovnasaver, Nanovna-H4 Antenna Analyzer Can Connect To A Nanovna And Extracts The Data For Display On A Computer, And For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring.
✔️[Improved Frequency Algorithm] The Improved Frequency Algorithm Of Nanovna H4 Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic. The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics. Used It To Check Out New Cable Or Antenna Installations And To Routinely Adjust The Rf Tuner For Optimum.
Features
- [UPGRADED NANOVNA-H4 V4.3] AURSINC nanovna-h4 is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4inch LCD display, with 1950mAh battery powered or USB powered. With latest HW 4.3 version, Nanovna-h4 antenna analyzer is added a brand new panel plus added a new SD port for data storage(support up to 32GB memory card, not included in the package)
- [IMPROVED FREQUENCY ALGORITHM] The improved frequency algorithm of nanovna h4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics. Used it to check out new cable or antenna installations and to routinely adjust the RF tuner for optimum
- [ANTENNA PERFORMANCE MEASUREMENT] The default firmware main function for vector network analyzer is used for antenna performance measurement. It has good RF performance for S-parameter measurements as previous models. NOTE: the Nanovna is only compatible with the low-speed and supports SPI mode SD cards for now. It is very efficient vector testing for ham radio operator, research electrical engineer and antenna builders
- [PC & ANDROID CONTROL] Using PC software NanoVNASaver, NanoVNA-H4 antenna analyzer can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
- [WHAT ARE INCLUDED] NanoVNA-H4 host (with 1950mAh battery) x1, USB Type-C data cable x1, 30cm/11.8inch SMA male to male RG174 RF cable x2, SMA simple calibration kit (OPEN/LOAD/SHORT) x1, SMA female to female connector x1, Lanyard with stylus x1, stylus pen x1
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon Similar To AURSINC NanoVNAH4 Vector Network Analyzer
#1
[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz Latest HW Version 3.6 | HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart
Asin: B07Z5VY7B6 | Model: NanoVNA-H Vector Network Analyzer | PartNumber: NanoVNA-H Vector Network Analyzer
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #2
Upgraded NanoVNA-H4 Vector Network Analyzer, SeeSii Latest V4.3/4.2 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Antenna Analyzer Measures S Parameters,Voltage Standing Wave Ratio, Phase,Delay, Smith Chart
Asin: B085CFHTBM | Model: NanoVNA-H4 | PartNumber: NanoVNA-H4 | Ean: 0889251537400 | UPC: 889251537400
😊【Improved Frequency Algorithm】:The Vector Network Analyzer Can Use The Old Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.Great For Trouble Shooting Antennas And Improving Performance..
🎁【Abundant Accessories】:Equipped With 1X Nanovna-H4(With 1950Ma-H Battery), 1X Usb Type-C Cable, 2 X 15Cm Sma Male To Male Rg316 Rf Cable, 1X Sma Male Calibration Kit - Open,1X Sma Male Calibration Kit - Short ,1 X Sma Male Calibration Kit - Load,1 X Touchscreen Pen.It's Very Useful As An Antenna Analyzer For Your Ham Station, Easy To Set Without Fancy Calibration. Note: The Function Of The Versions 4.2/4.3 Is The Same, It Will Be Shipped Randomly..
😊【Pc Connection & Tx/Rx Function】:The Vna Analyzer Uses Pc Software Nanovnasaver, It Can Connect To A Nanovna And Extracts The Data For Display On A Computer For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.In Addition,The Default Firmware Is Mainly Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11/S21 Parameters (Need To Manually Replace The Transceiver Port Wiring)..
😊【Built-In Micro-Sd Port & Time Display】: The Lastest Antenna Analyzer With Microsd Card Port,So You Can Save Field Test Data Or Screens To A Microsd Card At Any Time,Support Up To 32Gb Memory Card. (Not Include In The Pacakge).In Addition, Different From Old Version Nanovnas, The Date And Time Can Be Customized, Which Is Convenient For You To Further Record And Save Data..The Default Firmware Main Function Is Used For Antenna Performance Measurement..
Features
- 2022 UPGRADED NANOVNA ANALYZER : SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure range,4.0 inch LCD touchscreen,mini and portable design.This Antenna Analyzer is provides outstanding vector network measurement capabilities and perfect for evaluating antenna resonance and SWR.It is a very handy & smart analyzer for electronics engineer, amateur radio operators or radio diy amateurs.
- BUILT-IN MICRO-SD PORT & TIME DISPLAY : The lastest antenna analyzer with MicroSD card port,so you can save field test data or screens to a MicroSD card at any time,support up to 32GB memory card. (Not include in the pacakge).In addition, different from old version NanoVNAs, the date and time can be customized, which is convenient for you to further record and save data..The default firmware main function is used for antenna performance measurement.
- IMPROVED FREQUENCY ALGORITHM :The Vector Network Analyzer can use the old harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.Great for trouble shooting antennas and improving performance.
- PC CONNECTION & TX/RX FUNCTION :The vna analyzer uses PC software NanoVNASaver, it can connect to a NanoVNA and extracts the data for display on a computer for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.In addition,the default firmware is mainly used for antenna performance measurement. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
- Abundant Accessories :Equipped with 1x NanoVNA-H4(with 1950mA-h battery), 1x USB Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD,1 x Touchscreen pen.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration. Note: The function of the versions 4.2/4.3 is the same, it will be shipped randomly.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 1.00 Pounds
See On Amazon #3
AURSINC NanoVNA Vector Network Analyzer, 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Ham Radio with 2.8'' Touchscreen HW V3.5, Measuring S Parameters, Voltage Standing Wave Ratio, Phase Delay Smith Chart
Asin: B07T6LXNTV | Model: NanoVNA 2.8'' | PartNumber: NanoVNA 2.8'' | Ean: 0753318592193 | UPC: 753318592193
[Measurement Frequency] Measurement Frequency Of Nanovna Is 10Khz - 1.5Ghz (50Khz -900Mhz, Enable Extended Firmware). Measurement Range: 70Db (50Khz-300Mhz), 60Db (300M-900Mhz), 40Db (900Mhz-1.5Ghz) Enable Extended Firmware. The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz.
[Package List] 1X Nanovna Host (With 650Ma-H Battery, Without Case, Came In A Plastic Case), 1X Usb Type-C Data Cable, 2X 30Cm Sma Male To Male Rg174 Rf Cable, 1X Sma Simple Calibration Kit, 1X Sma Female To Female Connector.
[Accurate Measurement] The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring. The Ch0 Output Level Is Increased To 0Dbm When Using The Fundamental Wave, Resulting In More Accurate Reflection Measurement.
[More Functionality] Measuring Amplifier Gain, Bandwidth, Phase Frequency Characteristics, Transmission Line Loss, Characteristic Impedance, Coupler Coupling, Isolation, Filter, Diplexer Passband And So On. You Can Being Able To See A Graph Of The Swr Of A Given Antenna Over A Sweep That You Get To Set Start And Stop. Excellent Performance For Radio Amateurs.
[Pc Control] Designed A Practical And Simple Control Application On Pc, You Can Download Touchstone(Snp) Files For Radio Design And Simulation Software. There's Nanovnasharp Software Available For Pc And Linux (Github.Com/Mihtjel/Nanovna-Saver/Releases), Supports Control And Real-Time Display. You Can Connect The Nanovna To Your Pc For A Large Screen Display With A Usb-C Cable.
[Licensing And Firmware] Developed By Hugen, More Info Pls View "Nanovna-Users@Groups.Io". The Firmware Version Of Nano Vna Is Hw V3.5. It Is Upgradeable As New Firmware Is Developed (Github.Com/Ttrftech/Nanovna). The Default Firmware Of Aursinc Nanovna Main Function Is Used For Antenna Performance Measurement.
Features
- [Designed for DIY] This nanovna is a DIY product (no enclosure) that provides perfect vector network measurement capabilities in a credit card-sized design, featuring a 2.8-inch TFT touch screen (320 x240) and a 650mAh battery for up to 2 hours. Added battery management circuit to reduce power noise, USB power interference, charging current, and protects the battery
- [Licensing and Firmware] Developed by Hugen, more info pls view nanovna-users@groups.io. The firmware version of nano vna is HW V3.5. It is upgradeable as new firmware is developed (github.com/ttrftech/NanoVNA). The default firmware of AURSINC nanovna main function is used for antenna performance measurement
- [Measurement Frequency] Measurement frequency of nanovna is 10KHz - 1.5GHz (50KHz -900MHz, enable extended firmware). Measurement range: 70dB (50kHz-300MHz), 60dB (300M-900MHz), 40dB (900MHz-1.5GHz) enable extended firmware. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz
- [PC Control] Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. There's NANOVNASHARP software available for PC and Linux (github.com/mihtjel/nanovna-saver/releases), supports control and real-time display. You can connect the nanovna to your PC for a large screen display with a USB-C cable
- [Accurate Measurement] The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. The CH0 output level is increased to 0dBm when using the fundamental wave, resulting in more accurate reflection measurement
- [More Functionality] Measuring amplifier gain, bandwidth, phase frequency characteristics, transmission line loss, characteristic impedance, coupler coupling, isolation, filter, diplexer passband and so on. You can being able to see a graph of the SWR of a given antenna over a sweep that you get to set start and stop. Excellent performance for radio amateurs
- [Package list] 1x NanoVNA host (with 650mA-h battery, without case, came in a plastic case), 1x USB Type-C data cable, 2x 30cm SMA male to male RG174 RF cable, 1x SMA simple calibration kit, 1x SMA female to female connector
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Dimensions: 0.47 x 2.13 x 3.35 inches | Weight: 0.22 pounds
See On Amazon #4
Upgraded NanoVNA-F V2 Vector Network Analyzer 50kHz-3000MHz HF VHF UHF VNA Antenna Analyzer 4.3 inch with 5000mA-h,Measuring S-Parameter Voltage SWR, Phase, delay, Smith Chart
Asin: B0825PZNJJ
【Upgraded Aluminium Housing 】 Standard Aluminium Shell To Protect Sma Head And Reduce The Interference Of External Electromagnetic Wave To Instrument..
【Compact And Powerful】: Upgrade The User Program By Virtual U Disk.Switch To A Power Switch With A Greater Sense Of Operation And A Better Sense Of Operation.Support Chinese And English Menu Switching..
【Measurement Range】 The Nanovna-F Measurement Range Is 50K-3Ghz. You Can Go To The Official Website To Update And Expand The Frequency To 10Khz-1.5Ghz.The Harmonic Expansion Of The Output Signal Of The Clock Chip Si5351 Is Used To Measure The Frequency To 1000Mhz. At 600M-1Ghz, The Dynamic Range Of S11 Is 40Db (The Standing Wave Ratio Is Less Than 1.02)..
【Higher Capacity Battery,And Longer Standby Time】 Upgraded The Large Capacity 5000Ma-H 3.7V Battery, Longer Standby Time, And Extended Usb Interface. Typically, It Can Be Used As A Mobile Power Source To Charge Android Or Apple Phones When Not In Use. The Ic Is Charged By High Current 2A, And The Charging Time Is Shorter..
Features
- 4.3 inch Large Touch screen and powerful function Handheld Vector Network Analyzer using 4.3-inch IPS TFT LCD screen, with a larger view angle and can be seen clearly in strong outdoor light.which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on.
- Higher Capacity Battery,and Longer Standby time Upgraded the large capacity 5000mA-h 3.7V battery, longer standby time, and extended USB interface. Typically, it can be used as a mobile power source to charge Android or Apple phones when not in use. The IC is charged by high current 2A, and the charging time is shorter.
- Upgraded Aluminium Housing Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
- Measurement Range The NanoVNA-F measurement range is 50k-3GHz. You can go to the official website to update and expand the frequency to 10Khz-1.5Ghz.The harmonic expansion of the output signal of the clock chip SI5351 is used to measure the frequency to 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB (the standing wave ratio is less than 1.02).
- Compact and Powerful : Upgrade the user program by virtual U disk.Switch to a power switch with a greater sense of operation and a better sense of operation.Support Chinese and English menu switching.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
See On Amazon #5
Upgraded NanoVNA-H4 Vector Network Analyzer V4.3, Elikliv 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart, 4" Screen
Asin: B07XZF4HGD | Model: US112 | PartNumber: US112 | Ean: 0889252076069 | UPC: 889252076069
💜[Improved Performance & Built Quality] The 4 Inch Nanovna-H4 Is A Great Upgrade To The 2.8"" Screen. Its Performance Is Outstanding, The Display Quality Is Very Crisp.This Nanovna Is Perfect For Evaluating Antenna Resonance And Swr, 4 Inch Screen Is Easy To Read And Touch Screen Is Responsive And Can By Navigated With A Finger. With Good Accuracy And Built In 1950Mah Rechargeable Battery, Can Be Used In Ham Radio Shack..
💜[Complete Vna Set, Out Of The Box] With All The Attachments, This Antenna Analyzer Kit Comes In Quite A Nice Cardboard Box. Inside Content Includes: Nanovna-H4 (With 1950Ma-H Battery) X1, Usb Type-C Data Cable X1, 15Cm Sma Male To Male Rg316 Rf Cable X2, Sma Male Calibration Kit - Open X1, Sma Male Calibration Kit - Short X1, Sma Male Calibration Kit - Load X1. Great For Trouble Shooting Antennas And Improving Performance..
💜[Pc Control]: This Nanovna Can Be Controlled By Pc Using Software Vna Saver. The Software Has A Number Of Features Such As The Ability To Run Many Smaller Frequency Sweeps (The Nanovna Takes 101 Measurements Across A Sweep) And Combine The Results To Get A Higher Resolution Sweep. There Are Also Averaging Functions And Allows You To Do Time Domain Reflectometry Which Can Be Useful For Detecting Damaged Cable Runs. It Also Allows Easier Readoff Of Datapoints Using Markers..
💜[Must Have For Radio Operator Or Enthusiast] This Spectrum Analyzer Will Be A Nice Little Addition To The Workbench, Which Is A Very Handy Analyzer For The Amateur Radio Operator Or Radio Enthusiast. The Smith Chart Is Very Handy To Have As Well As Being Able To See Reflected Db. You Get A Lot Of Information From This Little Unit, Connect It To Your Pc And Is Able To Save A .Cal File For A Certain Frequency Which Saves Your Time..
Features
- [Upgraded Antenna Analyzer V4.3] The Upgraded NanoVNA-H4 Version features a larger resistive touchscreen (4 inch)and widened frequency scan range (10KHz-1.5GHz) to measure RF S11 (reflection), S21 (forward gain), and related parameters. Designed with a SD Card Port, this new nanovna is convenient for your data storage and sharing.
- [Must Have for Radio Operator or Enthusiast] This spectrum analyzer will be a nice little addition to the workbench, which is a very handy analyzer for the amateur radio operator or radio enthusiast. The smith chart is very handy to have as well as being able to see reflected db. You get a lot of information from this little unit, connect it to your PC and is able to save a .cal file for a certain frequency which saves your time.
- [Improved Performance & Built Quality] The 4 inch NanoVNA-H4 is a great upgrade to the 2.8 screen. Its performance is outstanding, the display quality is very crisp.This nanoVNA is perfect for evaluating antenna resonance and SWR, 4 inch screen is easy to read and touch screen is responsive and can by navigated with a finger. With good accuracy and built in 1950mAh rechargeable battery, can be used in ham radio shack.
- [PC Control]: This nanoVNA can be controlled by PC using software VNA Saver. The software has a number of features such as the ability to run many smaller frequency sweeps (the nanoVNA takes 101 measurements across a sweep) and combine the results to get a higher resolution sweep. There are also averaging functions and allows you to do time domain reflectometry which can be useful for detecting damaged cable runs. It also allows easier readoff of datapoints using markers.
- [Complete VNA Set, Out of the Box] With all the attachments, this antenna analyzer kit comes in quite a nice cardboard box. Inside content includes: NanoVNA-H4 (with 1950mA-h battery) x1, USB Type-C data cable x1, 15cm SMA male to male RG316 RF cable x2, SMA male calibration kit - OPEN x1, SMA male calibration kit - SHORT x1, SMA male calibration kit - LOAD x1. Great for trouble shooting antennas and improving performance.
- See more on Amazon...
Brand: Elikliv | Manufacturer: Elikliv
See On Amazon #6
NanoVNA-H4 Vector Network Analyzer with 32GB Card, V4.3 10KHz -1.5GHz Upgraded HF VHF UHF Antenna Analyzer 4" Touch Screen, Voltage Standing Wave Ratio, Phase,Delay, Smith Chart
Asin: B0CJ2D4CZP
【Built-In Micro-Sd Port And Customisable Time】The Latest Design Of This Antenna Analyzer With Microsd Card Port Supports Up To 32Gb Memory Card (Included In Set), So You Can Save Your Field Test Data Or Screen To Microsd Card At Any Time, And The New Feature Of Customisable Date And Time Makes It Convenient For You To Further Record And Save Data..
【Pc Connection & Tx/Rx Function】The Nanovna-H4 Network Analyzer Comes With Pc Connectivity And A Built-In 1950Mah Battery. The Nanovnasave Pc Software Can Be Used To Connect To Nanovna, Extract Data For Display On The Pc And Save To A Touchstone File.The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. The Tx/Rx Method Can Measure The Complete S11/S21 Parameters (Need To Manually Replace The Transceiver Port Wiring)..
【Improved Frequency Algorithm】Vector Network Analyzer Uses The Direct Output Of The Si5351 To Provide Better Than 70Db Of Dynamics In The 50K-300Mhz Frequency Range, Better Than 60Db Of Dynamics In The Extended 300M-900Mhz Band, And Better Than 40Db Of Dynamics In The 900M-1.5Ghz Band. Si5351 The Old Harmonics Of The Si5351 Are Extended To Support Measurements Up To 1.5Ghz, Making It Ideal For Troubleshooting A Wide Range Of Antennas..
【Latest Upgrade】Nanovna-H4 Vector Network Analyzer Is The Latest Version 4.3 With 4.0 Inch Large Lcd Touch Screen, 10Khz-1.5Ghz Measurement Range, Easy To Use, Compact And Portable, Perfect For Field Work. The Antenna Analyzer Measuring Is Ideal For Evaluating Antenna Resonance And Swr, And Can Be Easily Operated By Electronic Engineers, Amateur Radio Operators Or Radio Diy Enthusiasts After Learning From The Video..
Features
- NanoVNA-H4 Vector Network Analyzer Equipped with 1X NanoVNA-H4 analyzer (with 1950mAh battery), 1X USB Type-C cable, 1X Type-C to Type-C cable, 2 x 15cm SMA male to male RG316 RF cable, 1x SMA male calibration kit - OPEN,1x SMA male calibration kit - SHORT ,1 x SMA male calibration kit - LOAD, 1 x Touchscreen pen, (Added 1 x 32GB memory card)
- Latest Upgrade NanoVNA-H4 Vector Network Analyzer is the latest version 4.3 with 4.0 inch large LCD touch screen, 10KHz-1.5GHz measurement range, easy to use, compact and portable, perfect for field work. The Antenna Analyzer Measuring is ideal for evaluating antenna resonance and SWR, and can be easily operated by electronic engineers, amateur radio operators or radio DIY enthusiasts after learning from the video.
- Built-in MICRO-SD port and customisable time The latest design of this antenna analyzer with MicroSD card port supports up to 32GB memory card (included in set), so you can save your field test data or screen to MicroSD card at any time, and the new feature of customisable date and time makes it convenient for you to further record and save data.
- Improved frequency algorithm Vector Network Analyzer uses the direct output of the Si5351 to provide better than 70dB of dynamics in the 50K-300MHz frequency range, better than 60dB of dynamics in the extended 300M-900MHz band, and better than 40dB of dynamics in the 900M-1.5GHz band. si5351 The old harmonics of the si5351 are extended to support measurements up to 1.5GHz, making it ideal for troubleshooting a wide range of antennas.
- PC connection & TX/RX function The NanoVNA-H4 Network Analyzer comes with PC connectivity and a built-in 1950mAh battery. The NanoVNASave PC software can be used to connect to NanoVNA, extract data for display on the PC and save to a Touchstone file.The TX/RX method can measure the complete S11 and S21 parameters. The TX/RX method can measure the complete S11/S21 parameters (need to manually replace the transceiver port wiring).
- See more on Amazon...
Brand: TOSTOG | Manufacturer: TOSTOG
See On Amazon #7
Nanovna 10KHz-1.5Ghz Vector Network Analyzer Kit,SEESII MF HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 2.8" Touch Screen
Asin: B07Y53RCKW | Model: NanoVNA | PartNumber: NanoVNA | Ean: 0889251491146 | UPC: 889251491146
The Extended 300M-600Mhz Band Provides Better Than 60Db Of Dynamics, And The 600M-900M Band Is Better Than 50Db Of Dynamics..
This Is A Diy Product That Provides Perfect Vector Network Measurement Capabilities In The Size Of A Credit Card. It Includes A 2.8-Inch Touch Screen And 500Mah Battery, Which Can Be Used Offline For 2 Hours. For Longer Measurement, Please Connect External Power Supply Or Contact Me To Make A Larger Battery Version. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring..
Requirements Accomplished By Leveraging Spectra Premium's Oe Engine Management Systems Design Expertise.Platinum Connector Threads Reduce The Number Of Connection Points For Faster Reaction To Change.Ceramic-Built Printed Circuit Boards Are Protected By Silica Gel, Providing Superior Resistance To Temperature Changes And Vehicle Vibrations..
The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50Khz-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.
Features
- Unit is designed to fit for Original Equipment, form and function Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software.
- The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
- The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.
- Requirements accomplished by leveraging Spectra Premium's OE engine management systems design expertise.Platinum connector threads reduce the number of connection points for faster reaction to change.Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations.
- This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 500mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Dimensions: 0.43 x 3.37 x 2.13 Inches
See On Amazon #8
AURSINC Upgraded NanoVNA-F V3 Vector Network Analyzer 4.3 1MHz 6GHz Antenna Analyzer Ham Radio Measuring S-Parameters Voltage Standing Wave Ratio SWR, Phase, Delay, Smith Chart Support RTC Real time
Asin: B0C8TH4ZBB | Model: NanoVNA-F V3 | PartNumber: NanoVNA-F V3
[Efficient And Worthwhile] The Nano Vna Antenna Analyzer Is Made Of Metal Material, Which Is Durable And Can Effectively Shield Electromagnetic Interference. Powerful Features, Including Automatic Calibration, Pc Software Control, Compatible With Nanovna-Saver To Facilitate Measurement Data Transfer, Storage And Export. Built-In 4500M-Ah Rechargeable Battery, With C-Type Charging Cable And Led Charging Indicator, Suitable For Indoor Or Outdoor Application.
[Authentic & Package] Nanovna-F V3 Developed By Hugen. Package Include Aursinc Nanovna-F V3 Host (With 4500Mah Battery) Display: 4.3 Inch Tft X1, Sma Open/Short/Load Calibration Kit ×1, Sma-Kk Adapter ×1, Sma-Jj Adapter ×1, Sma-Jkw Adapter ×1, 20Cm Sma-Jj Rg405 Coaxial Cable ×2, Usb Type-C Cable ×1. The Vna Antenna Analyzer Provide Reliable And Accurate Measurement Results For Ham Radio Operators And Professionals..
[Multiple Measurement Functions] Nanovna-F V3 Antenna Analyzer Is Suitable For Antenna Testing Of Mf/Hf/Vhf/Uhf/Shf Bands. It Can Also Be Used To Measure Filters, Amplifiers, Attenuators, Cables, Power Dividers, Couplers, Duplexers And Other Rf Components. Supports A Variety Of Display Formats: Log Mag, Linear Mag, Phase, Smith R+Jx, Smith R+L/C, Vswr, Polar, Group Delay, Resistance, Reactance, Etc. Nano Vna Antenna Analyzer Are Widely Used, With Fast Response Time And High Operating Efficiency.
[Ultra Wide Frequency] Compared With The Nanovna F V2 (50Khz-3Ghz), The Nanovna F V3 Antenna Analyzer Measurement Range Is Improved To 1Mhz-6Ghz. It Can Be Used For S11 And S21 Measurements. The S21 Dynamic Range Of Nanovna-F V3 Is 65 Db, While The S11 Dynamic Range Is 50 Db. The Scan Points Is Up To 101-801 And The Calibration Result Storage Is 12, Covering Up To The Full Low Or High Frequency Range. The Vna Antenna Analyzers Are Versatile And Offer Faster And More Efficient Operation.
Features
- [Upgraded Performance] nanovna f v3 with 4.3inch (800x480pixel) touchscreen display, 1MHz to 6GHz widely measuring range. With the optimally designed signal processing system, the scan speed is up to 200 points/s and the maximum scanning points is up to 801. The RF interface of antenna analyzer is SMA connector witch can be used to connect DUTs directly and the nanovna analyzer supports TDR function for cable lengths measurement
- [Ultra Wide Frequency] Compared with the nanovna f v2 (50kHz-3GHz), the nanovna f v3 antenna analyzer measurement range is improved to 1MHz-6GHz. It can be used for S11 and S21 measurements. The S21 dynamic range of NanoVNA-F V3 is 65 dB, while the S11 dynamic range is 50 dB. The scan points is up to 101-801 and the calibration result storage is 12, covering up to the full low or high frequency range. The vna antenna analyzers are versatile and offer faster and more efficient operation
- [Efficient and Worthwhile] The nano vna antenna analyzer is made of metal material, which is durable and can effectively shield electromagnetic interference. Powerful features, including automatic calibration, PC software control, compatible with NanoVNA-Saver to facilitate measurement data transfer, storage and export. Built-in 4500m-ah rechargeable battery, with C-type charging cable and LED charging indicator, suitable for indoor or outdoor application
- [Multiple Measurement Functions] NanoVNA-F V3 antenna analyzer is suitable for antenna testing of MF/HF/VHF/UHF/SHF bands. It can also be used to measure filters, amplifiers, attenuators, cables, power dividers, couplers, duplexers and other RF components. Supports a variety of display formats: Log Mag, Linear Mag, Phase, Smith R+jX, Smith R+L/C, VSWR, Polar, Group delay, Resistance, Reactance, etc. Nano vna antenna analyzer are widely used, with fast response time and high operating efficiency
- [Authentic & Package] NanoVNA-F V3 developed by Hugen. Package include AURSINC NanoVNA-F V3 host (with 4500mAh battery) display: 4.3 inch TFT x1, SMA OPEN/SHORT/LOAD calibration kit 1, SMA-KK adapter 1, SMA-JJ adapter 1, SMA-JKW adapter 1, 20cm SMA-JJ RG405 coaxial cable 2, USB type-C cable 1. The vna antenna analyzer provide reliable and accurate measurement results for ham radio operators and professionals.
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Weight: 1.39 pounds
See On Amazon #9
Ham Radio Antenna Analyzer,1-60MHZ Shortwave Meter,with 2.1mm Power Jack,for Ham Radio Hobbists
Asin: B07SC3VQDQ | Model: Thincolug28adtk16 | PartNumber: Thincolug28adtk16 | Ean: 0746771265315 | UPC: 746771265315
Brand: Thincol | Manufacturer: Thincol
Dimensions: 1.57 x 5.91 x 3.54 inches | Weight: 1.21 Pounds
See On Amazon #10
NanoVNA-H4 Vector Network Analyzer Kit 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 4" LCD Touch Screen Nano VNA
Asin: B08FBHVFDB | Model: CV0009 | PartNumber: CV0009 | Ean: 0727277901532 | UPC: 727277901532
This Antenna Analyzer Is A Diy Product That Provides Perfect Vector Network Measurement Capabilities, Tiny And Handheld.The Default Firmware Main Function Is Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters (You Need To Manually Replace The Transceiver Port Wiring).
The Metal Shield Is Designed To Reduce The External Interference And Improve The Measurement Accuracy. Use Strong And Secure Power Supply At The Same Time. Enhanced Performance In All Aspects.
Using Pc Software Nanovnasaver, It Can Connect To A Nanovna And Extracts The Data For Display On A Computer And For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software..
The Vector Network Analyzer Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics..
Features
- This NanoVNA-H4 with 4inch LCD Touchscreen, Portable with 1950mAh battery rechargeabe powered or USB powered. Can last longer working time.
- The Vector Network Analyzer can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics and the 900M-1.5GHz band is better than 40dB of dynamics.
- This Antenna Analyzer is a DIY product that provides perfect vector network measurement capabilities, tiny and handheld.The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters (you need to manually replace the transceiver port wiring)
- Using PC software NanoVNASaver, It can connect to a NanoVNA and extracts the data for display on a computer and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software.
- The metal shield is designed to reduce the external interference and improve the measurement accuracy. Use strong and secure power supply at the same time. Enhanced performance in all aspects
- See more on Amazon...
Brand: Dearsee | Manufacturer: Dearsee
Weight: 1.00 pounds
See On Amazon #11
2023 Upgraded Mini 1300 Antenna Analyzer,SeeSii 4.3 Inch 0.1-1300MHz HF VHF UHF Antenna Analyzer with SMA Calibration Kits,Multi Measurement ANT/SWR/TDR/DSP RF Signal Generator Vector Network Analyzer
Asin: B0C6JWF43R | Model: LI58CP5B0070FBA | PartNumber: LI58CP5B0070FBA
🔋【Ultra-Long Service Life】: The Upgraded Spectrum Analyzer Is Designed With New Aluminium Alloy Shell For Durability And Good Heat Dissipation For Longer Machine Life. Built-In 3200M-Ah Rechargeable Battery,With Micro-Usb Charging Port And Led Charging Indicator,It Can Be Fully Charged Within 3 Hours,No Need To Charge Frequently..
👆【Multi-Function】: This Handheld Antenna Analyzer Will Be A Nice Little Addition To The Workbench For Radio Operator Or Enthusiast .It Support Single Frequency,Frequency Sweep,Multi Swr ,Tune Swr, S21 Gain, Find Frequency ,Quartz Data,Tdr Mode, L/C Meter,Dsp Measure,Rf Signal Generator, Etc Multi Functions..
🎁【What You Will Get:】: 1 X Mini1300 Antenna Analyzer,1 X Usb Charging Cable, 1 X Short Kit,1 X Open Kit, 1 X Load Kit,1 X Sma Connector, 1 X Uhf N-Type Connector,1 X Manual.It's Very Useful As An Antenna Analyzer For Your Ham Station, Easy To Use..
✨【External Storage Function】: The Frequency Analyzer Is Designed With A Sd Card Port, Support Tf Memory Card Storage, You Can Directly Record Data To The Sd Card And View Photos Kept In Sd Memory, Which Is Convenient For Your Data Sharing And Storage..
👉【Improved Performance】 :The 4.3 Inch Vector Network Analyzer Can Measure Swr, R, +Jx, -Jx, |Z|,Return Loss Multi Parameters, Swr Measurement Range: 1.0-1999 (Single Point Mode), 1.0-20.0 (Sweep Mode).There Are 3 Measurement Modes: Single Point Measurement, Scanning (Frequency Sweep), And Tdr Mode.And It Support Numerical Display, Curve Display, Smith Chart Display Modes.For The Amateur Radio Operator Or Radio Enthusiast, This Antenna Analyzer Will Be A Very Handy Analyzer To Have..
Features
- 2023 Upgraded Antenna Analyzer : The Mini1300 Antenna Analyzer features a larger resistive 4.3 inch touchscreen and widened frequency scan range MF/HF/VHF input for 0.1-1300MHz, can measure multi parameters. With SMA Open Short Load Calibration Kits , easy to Calibrate directly.
- Improved Performance :The 4.3 inch Vector Network Analyzer can measure SWR, R, +Jx, -Jx, |Z|,Return loss multi parameters, SWR measurement range: 1.0-1999 (single point mode), 1.0-20.0 (sweep mode).There are 3 measurement modes: Single point measurement, Scanning (Frequency Sweep), and TDR Mode.And it support Numerical display, curve display, Smith chart display Modes.For the amateur radio operator or radio enthusiast, this antenna analyzer will be a very handy analyzer to have.
- Ultra-long Service Life : The upgraded spectrum analyzer is designed with new aluminium alloy shell for durability and good heat dissipation for longer machine life. Built-in 3200m-ah rechargeable battery,with Micro-USB charging port and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.
- External Storage Function : The frequency analyzer is designed with a SD Card Port, support TF memory card storage, you can directly record data to the SD card and view photos kept in SD memory, which is convenient for your data sharing and storage.
- Multi-Function : This handheld antenna analyzer will be a nice little addition to the workbench for Radio Operator or Enthusiast .It support single frequency,frequency sweep,multi SWR ,tune SWR, S21 gain, find frequency ,quartz data,TDR mode, L/C meter,DSP measure,RF signal generator, etc multi functions.
- What You Will Get: : 1 x Mini1300 Antenna Analyzer,1 x USB Charging Cable, 1 x Short kit,1 x Open Kit, 1 x Load Kit,1 x SMA Connector, 1 x UHF N-Type Connector,1 x Manual.It's very useful as an antenna analyzer for your ham station, easy to use.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Dimensions: 1.57 x 6.02 x 3.74 Inches | Weight: 1.00 pounds
See On Amazon #12
Upgraded NanoVNA V2 PLUS4 Vector Network Analyzer 50kHz-4GHz, AURSINC 4'' Antenna Analyzer HF VHF UHF Measuring S Parameters, Voltage Standing Wave Ratio, Phase Delay, Smith Chart with 3200mAh Battery
Asin: B09FPNR9J3
✔️[Upgraded Performance] The Scanning Speed Of Nanovna V2 Antenna Analyzer Increases By 4 Times (400 Points/Sec) Than Previous V2 Versions. Flip Display, For Your Using Convenience, You Can Flip The Display As The Following Steps: Menu - Display - Flip Display.
✔️ [Larger Capacity Rechargeable Battery] The Upgraded Vector Network Analyzer Is Contained With A 3200Mah/3.7V Lithium Rechargeable Battery With Loger Operating Time And Lasting Battery Life. Also There Are Battery Charge Led Indicators At The Back Of The Vna Which Are The Battery Fuel Gauge, The One That Is Closest To The Ch1 Port Connector Is The Lowest Charge Level Indicating ≤ 25%.
✔️ [Original Nanovna V2 Plus4] Aursinc Nanovna V2 Plus4 Is The Original Edition (If You Buy The Clone One The Vna Cannot Proceed The Software Update Form The Official Site) Nanovna V2 Plus4 V2.4 Comes With A 4-Piece Calibration Set - Open, Short, Load, & Thru, Two Male-Male Sma Cables, A Usb2-B To Usb2-A Cable (Black Or Silver), And A Stylus To Operate The Touch Screen Menu And Markers.
✔️[Support Pc Control] Support Pc Software Control, Like Windows(Above 7), Linux, Macos, The Vna Can Be More Compatible With Pc And Antenna Measurements, When Measuring The Frequency. It Works Well With A Computer To Print Out Standing Wave Ratios, Smith Charts And Other Antenna Related Information Over Various Frequency Ranges.
✔️ [Ultra-Wide Frequency Range] Compared To The Previous Nanovnas (10Khz-1.5/3Ghz), Aursinc Nanovna V2 Vector Network Analyzer Provides A 50Khz-4Ghz Ultra-Wide Frequency Range With An Improved Precision And Accuration, Moreover, The System Dynamic Range For This Vna Is Up To 90Db Dynamic Range (1Ghz) And Up To 80Db Dynamic Range (3Ghz); Plus4 Vna Has Improved Shielding That Achieves High Dynamic Range With An Aluminum Enclosure.
Features
- [2022 ADVANCED NANOVNA] ORIGINAL NanoVNA V2 Plus4 (S-A-A-2) is a 4GHz Transmission/Reflection vector network analyzer, measuring the S11 Reflection coefficient and the S21 Transmission coefficient of a high frequency network; Not only testing standing wave impedance of the antenna, but also can debug the duplexer, the insertion loss of the filter, the isolation and testing the attenuation of the cable, shorten the coefficient, the phase, the amplification of the antenna amplifier
- [ULTRA-WIDE FREQUENCY RANGE] Compared to the previous NanoVNAs (10KHz-1.5/3GHz), AURSINC NanoVNA V2 vector network analyzer provides a 50KHz-4GHz ultra-wide frequency range with an improved precision and accuration, Moreover, the System dynamic range for this VNA is up to 90dB dynamic range (1GHz) and up to 80dB dynamic range (3GHz); Plus4 VNA has improved shielding that achieves high dynamic range with an aluminum enclosure
- [UPGRADED PERFORMANCE] The scanning speed of NanoVNA V2 antenna analyzer increases by 4 times (400 points/sec) than previous V2 versions. Flip Display, for your using convenience, you can flip the display as the following steps: Menu - Display - Flip Display
- [SUPPORT PC CONTROL] Support PC software control, like Windows(above 7), Linux, MacOS, the VNA can be more compatible with PC and antenna measurements, when measuring the frequency. It works well with a computer to print out Standing Wave Ratios, Smith Charts and other Antenna related information over various frequency ranges
- [LARGER CAPACITY RECHARGEABLE BATTERY] The upgraded vector network analyzer is contained with a 3200mAh/3.7V lithium rechargeable battery with loger operating time and lasting battery life. Also there are battery charge LED indicators at the back of the VNA which are the battery fuel gauge, the one that is closest to the CH1 port connector is the lowest charge level indicating 25%
- [ORIGINAL NanoVNA V2 Plus4] AURSINC NanoVNA V2 Plus4 is the Original edition (if you buy the clone one the VNA cannot proceed the software update forM the official site) NanoVNA V2 PLUS4 v2.4 comes with a 4-piece calibration set - open, short, load, & thru, two male-male SMA cables, a USB2-B to USB2-A cable (black or silver), and a stylus to operate the touch screen menu and markers
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #13
Upgraded Nanovna H 10KHz-1.5Ghz 2.8" Vector Network Analyzer VNA MF HF VHF UHF Analyzer Measuring S Parameters, SWR, Phase, Delay, Smith Chart Touch Screen SD Card (vna 1.5G 2.8)
Asin: B0B4PPLFMS | Ean: 0768472378651 | UPC: 768472378651
We Add Sma To Bnc Connector For Testing Bnc Connector. We Add One Uhf Antenna And One Vhf Antenna For Comparing..
Upgraded: We Add A 8G Sd Card To Save The Image, You Can Save Results And Upload To Pc For Further Analyze..
The Extended 300M-600Mhz Band Provides Better Than 60Db Of Dynamics, And The 600M-900M Band Is Better Than 50Db Of Dynamics..
Features
- The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50KHz-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
- The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.
- We add Sma to Bnc connector for testing Bnc connector. We add one uhf antenna and one vhf antenna for comparing.
- Upgraded: We add a 8G sd card to save the image, you can save results and upload to PC for further analyze.
- See more on Amazon...
Brand: Mokxihit | Manufacturer: IWatson Electronics
See On Amazon #14
NanoVNA-H4 Vector Network Analyzer Kit 4inch LCD Touch Screen 10KHz-1.5GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, SWR,Smith Chart
Asin: B09NRGBDJ6 | Model: NanoVNA-H4 | PartNumber: NanoVNA-H4 | Ean: 0676351449685 | UPC: 676351449685
** Compatct & Long Working Time:This Antenna Analyzer With Built In 1950Mah Battery For Longer Working Time,While It's Designed With A Compact Size. You Could Use It To Used Measure The Antenna Performance ..
** Clear Data Display: Nanovna-H4 With 4 Inch Large Lcd Display Shows The Data And Curve More Clearly,Which Brings Good User Experience.It Also Redesigned Power Management Circuit To Reduce Power Noise, Usb Power Interference, And Charging Current..
** Support Pc Connection: This Vector Network Analyzer Can Output Data And Save Siles That Display On The Computer By Connecting Pc Software Nanovnasaver. It Makes More Convinient To Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.
**Optimization Version:The Vector Network Analyzer Can Measure 10Khz-1.5Ghz By Adopting The Odd Harmonic Extension Of Si5351. Nanovna-H4 Have Performance Is Better After Optimization: The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics..
Features
- **Powerful Functions:NanoVNA-H4 is an open-hardware vector network analyzer with a frequency capability of 10kHz-1500MHz, which can be used to measure S parameters, voltage standing wave ratio, SWR, phase, delay and shows Smith Chart.
- **Optimization Version:The Vector Network Analyzer can measure 10KHz-1.5GHz by adopting the odd harmonic extension of si5351. NanoVNA-H4 have performance is better after optimization: The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.
- ** Compatct & Long working time:This Antenna Analyzer with built in 1950mAh battery for longer working time,while it's designed with a compact size. you could use it to used measure the antenna performance .
- ** Support PC connection: This Vector Network Analyzer can output data and save siles that display on the computer by connecting PC software NanoVNASaver. It makes more convinient to export Touchstone (snp) files for various radio design and simulation software through PC software
- ** Clear Data Display: NanoVNA-H4 with 4 inch Large LCD display shows the data and curve more clearly,which brings good user experience.It also redesigned power management circuit to reduce power noise, USB power interference, and charging current.
- See more on Amazon...
Brand: TZT | Manufacturer: TZT
Dimensions: 0.98 x 3.94 x 2.76 inches
See On Amazon #15
AURSINC SMA Calibration Kit for NanoVNA H H4 F V2 V3 SAA Mini1300 PS100 Vector Network Analyzer Antenna Analyzer | Calibrate RF Coaxial Test Connector Short/Load/Open/Thru Type 5 pcs/Set
Asin: B082F25WXC | Model: 19120601 | PartNumber: 19120601
Inpedance: 50 Ohm.
Material: Copper, Shape: Circle..
Vswr: Less Than 1.1.
Connector: Sma Male For Short And Load..
Features
- Frequency: DC to 3GHz
- Connector: SMA male for Short and Load.
- Inpedance: 50 Ohm
- VSWR: less than 1.1
- Material: Copper, Shape: Circle.
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #16
AURSINC NanoVNA-H4 Vector Network Analyzer 10KHz-1.5GHz + NanoVNA USB C & USB 3.0 OTG Card Reader with 32GB Micro SD Card
Asin: B0BHQJT66F
✔️[Antenna Performance Measurement] The Default Firmware Main Function For Nanovna-H4 Vector Network Analyzer Is Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring.
✔️ [What Are Included?] Nanovna-H4 Host (With Battery) X1, Usb Type-C Data Cable X1, Card Reader With 32Gb Micro Sd Card，30Mm Sma Male To Male Rg174 Rf Cable X2, Sma Simple Calibration Kit X1, Sma Female To Female Connector X1. Note: The Nanovna Is Only Compatible With The Low-Speed And Supports Spi Mode Sd Cards For Now..
✔️[Pc Control] Using Pc Software Nanovnasaver, Nanovna-H4 Antenna Analyzer Can Connect To A Nanovna And Extracts The Data For Display On A Computer, And For Saving To Touchstone Files. We Can Export Touchstone (Snp) Files For Various Radio Design And Simulation Software Through Pc Software.
✔️[Improved Frequency Algorithm] The Improved Frequency Algorithm Of Nanovna-H4 Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics;The Metal Shield Is Designed To Reduce The External Interference And Improve The Measurement Accuracy.
Features
- [2022 Upgraded Nanovna-H4 HW V4.3] Latest features: with latest HW 4.3 version, Nanovna-H4 is added a brand new panel plus added a new SD port for data storage(support up to 32GB memory card, not included in the package). The NanoVNA-H4 vector network analyzer is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4-inch LCD display, portable with 1950mAh battery powered or USB powered
- [Improved Frequency Algorithm] The improved frequency algorithm of NanoVNA-H4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics;The metal shield is designed to reduce the external interference and improve the measurement accuracy
- [Antenna Performance Measurement] The default firmware main function for NanoVNA-H4 vector network analyzer is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
- [PC Control] Using PC software NanoVNASaver, NanoVNA-H4 antenna analyzer can connect to a NanoVNA and extracts the data for display on a computer, and for saving to Touchstone files. We can export Touchstone (snp) files for various radio design and simulation software through PC software
- [What are Included?] NanoVNA-H4 host (with battery) x1, USB Type-C data cable x1, Card Reader with 32GB Micro SD Card 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1. NOTE: the Nanovna is only compatible with the low-speed and supports SPI mode SD cards for now.
- See more on Amazon...
Brand: AURSINC
See On Amazon #17
AW07A HF+VHF+UHF Antenna Analyzer,Professional 1-9.9 SWR Antenna Meter L/C Tester RF Impedance Analyzer
Asin: B07WDKYP25 | Ean: 0739551874142 | UPC: 739551874142
Swr Value From 1 To 9.9..
This Analyzer Acts As An Inexact Signal Source And Frequency Counter..
L/C Meter - It's Also An L/C Meter That Measures The Values Of Capacitors And Inductors..
It Can Test The Swr State Of Your Antenna, Measure Impedance And Reactance Components..
Features
- Professional antenna analyzer - A compact RF impedance analyzer.
- It can test the SWR state of your antenna, measure impedance and reactance components.
- SWR value from 1 to 9.9.
- L/C meter - It's also an L/C meter that measures the values of capacitors and inductors.
- This analyzer acts as an inexact signal source and frequency counter.
- See more on Amazon...
Brand: Mugast | Manufacturer: Mugast
Dimensions: 2.95 x 6.69 x 3.74 inches | Weight: 1.59 Pounds
See On Amazon #18
AURSINC NanoVNA SAA-V2 Vector Network Analyzer 50KHz -3GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 1950mAh
Asin: B089DJXMX3 | Ean: 0753318593251 | UPC: 753318593251
[Pc Connection] The Saa-V2 Nanovna Can Be Controlled By Pc Via Vna-Qt Software,Supported For Linux, Windows (7+), Mac Os Planned. It Also Supports Nanovna-Saver For Extracting The Data For Displaying On A Computer, And For Saving To Touchstore Files..
[Flip Display] For A Much More Convenient Usage, You Can Flip The Display As The Following Steps: Menu - Display - Flip Display. Package Include S-A-A-2 Host (With Battery) X1, Micro Usb Data Cable X1, 30Cm Sma Male To Male Ss405 Rf Cable X2, Sma Male Calibration Kit - Open X1,Sma Male Calibration Kit - Short X1,Sma Male Calibration Kit - Load X1,Sma Female To Female Connector X1.
[Multiple Function] The Default Firmware Main Function Is Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters..
[New Upgraded Version] The S-A-A-2/Nanovna_V2 Uses A Similar User Interface To The Nanovna, But With A Different Technical Architecture, The S-A-A-2/Nanovna_V2 Does Not Load The Initial Calibration Data At Startup, And Does Not Automatically Interpolate The Calibration Data After The User Changes The Frequency, And Must Recalibrate Or Call Back The Calibration Data After Each Startup And Frequency Change. Please Read The User Manual Carefully Before Use To Avoid Damaging The Device..
Features
- [IMPROVED TO 3G] The SAA-V2 vector network analyzer has been impooved to 3G; Transmission Mearsure S21: 70dB(50KHz-1.5GHz), 60dB(1.5GHz-3GHz). Reflection Measure S11: 50dB(50KHz-1.5GHz), 40dB(1.5GHz-3GHz); Antenna Analyzer: 1.005(50KHz - 1.5GHz), 1.02(1.5GHz-3GHz)
- [NEW UPGRADED VERSION] The S-A-A-2/NanoVNA_V2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the S-A-A-2/NanoVNA_V2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.
- [PC CONNECTION] the SAA-V2 NANOVNA can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS planned. It also supports Nanovna-Saver for extracting the data for displaying on a computer, and for saving to Touchstore files.
- [MULTIPLE FUNCTION] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters.
- [Flip Display] For a much more convenient usage, you can flip the display as the following steps: Menu - Display - Flip Display. Package include S-A-A-2 host (with battery) x1, Micro USB data cable x1, 30cm SMA male to male SS405 RF cable x2, SMA male calibration kit - OPEN x1,SMA male calibration kit - SHORT x1,SMA male calibration kit - LOAD x1,SMA female to female connector x1
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
See On Amazon #19
[Upgraded] AURSINC NanoVNA-H Vector Network Analyzer 10KHz -1.5GHz + USB C & USB 3.0 OTG SD Card Reader and 32GB SD Card
Asin: B0BGS76W27
[Strong And Secure Power Supply] This Vna Is Battery Powered Or Usb Powered; Built In 650Mah Battery, Could Work For 2 Hours Continuously, If Need Extra Working Time, It Can Be Connected To Power Bank Or Power Source..
Note: Our Nanovna Is Only Compatible With Low-Speed And Supports Spi Mode Sd Card For Now ; Package Include Nanovna Host (With Battery) Display: 2.8 Inch Tft X1, Usb Type-C Data Cable X1, 30Mm Sma Male To Male Rg174 Rf Cable X2, Sma Simple Calibration Kit X1, Sma Female To Female Connector X1.
[Multiple Functions] The Default Firmware Main Function Is Used For Antenna Performance Measurement. The Tx/Rx Method Can Measure The Complete S11 And S21 Parameters. If You Need To Obtain S12 And S22, You Need To Manually Replace The Transceiver Port Wiring. Designed A Practical And Simple Control Application On Pc, You Can Download Touchstone(Snp) Files For Radio Design And Simulation Software.
[Improved Frequency Algorithm: The Improved Frequency Algorithm Can Use The Odd Harmonic Extension Of Si5351 To Support The Measurement Frequency Up To 1.5Ghz. The 50K-300Mhz Frequency Range Of The Si5351 Direct Output Provides Better Than 70Db Dynamic, The Extended 300M-900Mhz Band Provides Better Than 60Db Of Dynamics, And The 900M-1.5Ghz Band Is Better Than 40Db Of Dynamics.
Features
- [2022 UPGRADED HW V3.6] NEW HW VERSION: V3.6 with MicroSD card port now can have the measurement data or the screenshots saved in the it at anytime. Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with Type C-Type C cable( original PCB needs OTG cable), see a clear HD image on your phone. Added a caase, which is protective and dust-proof. Disply: 2.8 inch TFT (320 x240)
- [IMPROVED FREQUENCY ALGORITHM: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics
- [STRONG AND SECURE POWER SUPPLY] This VNA is battery powered or USB powered; Built in 650mAh battery, could work for 2 hours continuously, if need extra working time, it can be connected to power bank or power source.
- [MULTIPLE FUNCTIONS] The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring. Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software
- NOTE: Our nanovna is only compatible with low-speed and supports SPI mode SD card for now ; Package include NanoVNA host (with battery) display: 2.8 inch TFT x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1
- See more on Amazon...
Brand: AURSINC
See On Amazon
Looking For Something Else?
Search