Nilight Windshield Frame Mounting Bracket for 52 LED Light Bar and Pod Light on Wrangler JK 2007-2017, 2 Years Warranty
Asin: B0841H7HQL | Model: 90048B | PartNumber: 90048B | Ean: 0781621091706 | UPC: 781621091706
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Side Mounting Bracket: The Sturdy Bracket Can Firmly Fix The Light Bar. Quakeproof When Passing Through Rugged Terrain.
Simple Installation: Just Peel The Foam Tap, Stick Them To The Bracket, Mount The Bracket To The Windshield Frame With Vehicles Original Factory Bolts, And Then Use The Mounting Hardware Comes With The Light Bar, To Install The Light Bar On The Bracket. (Note: If Mounting Hardware Size From The Light Bar Are Not Same As Mounting Holes Size On Bracket, You Can Use Washers To Make Them Fit). 2 Years Warranty.
High Performance: Ip67 Waterproof Rate, Efficient Cooling, Die-Cast Aluminum Alloy Housing, Over 30, 000 Hours Lifespan.
Upgrading Reflector Cup: The Broad Reflective Plate On Both Sides Allows Multi-Angle Refraction, Ideal For Ambient Illumination.
Features
- Fitment Type: Specially designed for JK 2007-2017 for easier light mounting. Upper windshield is to install 52 light bar, while the lower windshield is to install bottom-mounted small led pod lights, remains ample to adjust.
- Upgrading reflector cup: the broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination
- SIDE MOUNTING BRACKET: The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain
- High performance: IP67 waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan
- Simple Installation: Just peel the foam tap, stick them to the bracket, mount the bracket to the windshield frame with vehicles original factory bolts, and then use the mounting hardware comes with the light bar, to install the light bar on the bracket. (Note: If mounting hardware size from the light bar are not same as mounting holes size on bracket, you can use washers to make them fit). 2 Years Warranty
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 4.92 x 24.41 x 9.06 inches
Warranty: 2 Years Warranty
See On Amazon Similar To Nilight Windshield Frame Mounting Bracket
#1
Nilight 90020B 2 Pack Mounting Bracket Kit LED Off Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder, 2 Years Warranty,Black
Asin: B0714CYKBJ | Model: 90020B | PartNumber: 90020B | Ean: 0600537016590 | UPC: 600537016590
Wide Application: Can Be Used On Tubes Of 1", 1-1/2", 1-3/4" & 2" In Diameter And Applied To Led Light Bar For Almost All Kinds Of Vehicle.
Package Includes: 2Pcs Led Light Bar Mounting Bracket. 2 Years Warranty Honored By Nilight..
Easy Installation: Pre-Drilled Hole, Allows More Lights To Be Added To Vehicle Without Drilling, Allen Hex Key Included For Quick Installation.
Useful Rubber: High Quality Rubber Inserts Dampen Driving Vibration And Avoid Scraping Bull Bar Surface. Simplifies The Installation Of Nilight Off Road Led Light Bars Onto The Roof Rack, Roll Cages Bull Bar Or Head Rack Of Your Atv, Utv And Trucks.
Features
- Sturdy bracket: Strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving
- Useful rubber: High quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Simplifies the installation of Nilight off road LED light bars onto the roof rack, roll cages bull bar or head rack of your ATV, UTV and trucks
- Wide application: Can be used on tubes of 1, 1-1/2, 1-3/4 & 2 In diameter and applied to LED light bar for almost all kinds of vehicle
- Easy installation: Pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation
- Package includes: 2Pcs LED light bar mounting bracket. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
First Available: 06/09/2017
Brand: Nilight | Manufacturer: Nilight
Dimensions: 2.00 x 3.00 x 3.00 inches | Weight: 0.90 pounds
Warranty: 2 years Warranty
See On Amazon #2
LED Light Bar Mounting Bracket, Nilight 2PCS Universal Adjustable Pillar Hood Led Work Light Mount Bracket Clamp Holder for Off Road Jeep Truck SUV Installing Without Drilling, 2 Years Warranty
Asin: B0824RPMDB | Model: 90043B | PartNumber: 90043B | Ean: 0732694520389 | UPC: 732694520389
No Drilling &Anti-Slip Design: No Drilling Is Required, Just Clamp The Kit And Tighten Up. The Clamp Kit Comes With Anti-Slip Teeth And Rubber Pad To Make Sure A Firm Installation And No Scratches Left On The Surface Of The Hood..
Package Include: 2 X 304 Stainless Steel Brackets (Lamp Is Not Included.), 2 X Hex Allen Wrench..
High Compatibility: Can Used To Mount Different Thickness Of Work Lights, Fog Lights, Driving Lights Etc. As Only The Max Limit Of The Clamp Board Thickness On The Vehicle Is Within 8Mm..
Free Adjustability: You’Re Able To Freely Adjust 180°Up And Down And 60°Left And Right To Make Sure Your Light Is At The Exact Lighting Direction And At A Perfect Lighting Angle..
Features
- Durable Material: Made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather.
- Free Adjustability: You re able to freely adjust 180 up and down and 60 left and right to make sure your light is at the exact lighting direction and at a perfect lighting angle.
- No Drilling &Anti-slip Design: No drilling is required, just clamp the kit and tighten up. The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood.
- High Compatibility: Can used to mount different thickness of work lights, fog lights, driving lights etc. As only the max limit of the clamp board thickness on the vehicle is within 8mm.
- Package Include: 2 x 304 stainless steel brackets (Lamp is not included.), 2 x hex Allen wrench.
- See more on Amazon...
Brand: Nilight | Manufacturer: Niligh
Dimensions: 1.57 x 4.33 x 1.97 inches
Warranty: 2 Years Warranty
See On Amazon #3
Nilight 90025B Led Light Bar Mounting Brackets 2pcs Universal Hood Led Work Light led Pods Mount Bracket Clamp Holder for SUV Truck Off Road Installed No Need Drilling, 2 Years Warranty,Black
Asin: B07B931B3N | Model: 90025B | PartNumber: 90025B | Ean: 0760960916208 | UPC: 760960916208
Stable & Durable: Five Screws Are Enough To Tight The Light With The Car Cover Tightly.
Made Of 304 Stainless Steel, The Surface Covered With Rubber Anti-Rust Paint, Can Ensure Absolute Anti-Rust, Anti-Corrosion. 2 Years Warranty Honored By Nilight.
Universal: It Can Be Used To Install Almost All Led Light Pods. Easy To Install. No Any Damage To The Car Surface Paint.
Features
- Anti-slip Surface: the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint
- Universal: It can be used to install almost all LED Light Pods. Easy to install. No any damage to the car surface paint
- Stable & Durable: Five Screws are enough to tight the light with the car cover tightly
- Made of 304 Stainless Steel, the surface covered with rubber anti-rust paint, can ensure absolute anti-rust, anti-corrosion. 2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 3.00 x 1.00 x 3.00 inches | Weight: 0.22 Pounds
Warranty: 2 Years Warranty
See On Amazon #4
Nilight - 90026B 2PCS Jeep JK A-Pillar Windshield Hinge Mounting Brackets for Offroad LED Fog Light Halogen Work Light for 2007-2017 Jeep Wrangler JK,2 years Warranty,Black
Asin: B07PG26P6M | Model: 90026B | PartNumber: 90026B | Ean: 0812227031053 | UPC: 812227031053
Ample Room For Mounting: Length Of The Mounting Plate Of The Bracket Provides Ample Room For You To Mount Oversized Lights, Maximum Thickness Of The Light Can Be 3. 7”.
Package Include: 2 Pieces Jeep Jk A-Pillar Windshield Mounting Brackets. (Mounting Bolts Are Not Included) 2 Years Warranty Honored By Nilight.
Applicable Vehicles: 2007-2017 Jeep Wrangler Jk, The Mounting Plate Contour Will Perfectly Match That Of The Jeep Jk’S Panel Contour..
Excellent Protection: Padded Backplate Between The Contact Area Of The Jeep And Mounting Bracket, Preventing Your Jeep From Being Worn Down. Also Ensure A Firmer Mounting.
Features
- Free of Drilling: No drilling required. Just find your jeep s factory holes and stock bolts, and then mount the brackets on and lock
- Excellent Protection: Padded backplate between the contact area of the jeep and mounting bracket, preventing your jeep from being worn down. Also ensure a firmer mounting
- Ample Room for Mounting: Length of the mounting plate of the bracket provides ample room for you to mount oversized lights, maximum thickness of the light can be 3. 7
- Applicable Vehicles: 2007-2017 Jeep Wrangler JK, the mounting plate contour will perfectly match that of the Jeep JK s panel contour.
- Package Include: 2 pieces Jeep JK A-Pillar windshield mounting brackets. (Mounting bolts are not included) 2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 4.00 x 4.00 x 4.00 inches
Warranty: 2 Years Warranty
See On Amazon #5
Nilight - 90020D 4PCS Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty, Black
Asin: B07QGDXK4J | Model: 90020D | PartNumber: 90020D | Ean: 0812227031596 | UPC: 812227031596
Wide Application: Can Be Used On Tubes Of 1"", 1-1/2"", 1-3/4"" & 2"" In Diameter And Applied To Led Light Bar For Almost All Kinds Of Vehicle.
Package Includes: 4 Pcs Led Light Bar Mounting Bracket, 2 Years Warranty Honored By Nilight.
Easy Installation: Pre-Drilled Hole, Allows More Lights To Be Added To Vehicle Without Drilling, Allen Hex Key Included For Quick Installation.
Useful Rubber: High Quality Rubber Inserts Dampen Driving Vibration And Avoid Scraping Bull Bar Surface.
Features
- Sturdy bracket: strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving
- Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface
- Wide application: can be used on tubes of 1, 1-1/2, 1-3/4 & 2 in diameter and applied to led light bar for almost all kinds of vehicle
- Easy installation: pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation
- Package includes: 4 PCs led light bar mounting bracket, 2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 3.82 x 6.54 x 4.45 inches
Warranty: 2 Years Warranty
See On Amazon #6
Nilight 2PCS Mounting Base Bracket LED Light Bar Slide Mount Bracket 2 Years Warranty (90034B),Black
Asin: B07TMZ3LJM | Model: 90034B | PartNumber: 90034B | Ean: 0767912577487 | UPC: 767912577487
Sliding Black Block: No Need Drilling, If There Is A Mounting Hole Before, The Sliding Block Can Slide Left And Right To Fit The Existing Holes..
Fitment: Apply To Most Slide Mounted Led Light Bars: 18W, 36W, 72W, 108W, 126W, 162W, 198W, 234W, 252W, Etc. 2 Years Warranty Honored By Nilight.
Easy To Use: Works With Led Light Bar, Side Mount Screws And Bolts, Directly Mount Onto Your Bull Bar, Grille Guard, Car Top Racks, Etc..
Adjustable Bracket：The Pod Can Be Adjusted To About 45 Degrees, Which Makes Changing Direction Of Light Beam Easier..
Features
- High Quality: It is made of strong and lightweight aluminum alloy material. The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain.
- Adjustable Bracket The pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier.
- Sliding Black Block: No need drilling, if there is a mounting hole before, the sliding block can slide left and right to fit the existing holes.
- Easy To Use: Works with LED light bar, side mount screws and bolts, directly mount onto your bull bar, grille guard, car top racks, etc.
- Fitment: Apply to most slide mounted LED light bars: 18W, 36W, 72W, 108W, 126W, 162W, 198W, 234W, 252W, etc. 2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: 2 years Warranty
See On Amazon #7
Nilight 52Inch Led Light Bar Spot Flood 2Pcs 18W 4Inch Spot LED Pods Windshield Frame Mounting Bracket on Wrangler JK 2007-2017 with Off Road Wiring Harness- 3 Leads, 2 Years Warranty
Asin: B09P3W6BB1 | Model: ZH439 | PartNumber: ZH439 | Ean: 0812227035792 | UPC: 812227035792
16Awg Wiring Harness: Universal Fit Compatible With All Automobiles Boats And Devices Equipped With A 12V Power Source,Circuit Protection Power Relay-Safety Protection And Conversion Circuit Blade Fuse Protects The Circuit When Overcurrent Or Short Circuit Occurs.
Package Included：1 X 52Inch 300W Led Light Bar,2 X 4Inch 18W Led Light Bar ,1 X Windshield Frame Mounting Bracket And 16Awg Wiring Harness,2 Years Warranty Honored By Nilight.
Fitment Type: Specially Designed For Jk 2007-2017 For Easier Light Mounting. Upper Windshield Is To Install 52” Light Bar, While The Lower Windshield Is To Install Bottom-Mounted Small Led Pod Lights, Remains Ample To Adjust..
Adjustable Mounting Bracket: The Pod Can Be Adjusted To About 45 Degrees, Which Makes Changing Direction Of Light Beam Easier.The Sturdy Side Mounting Bracket Can Firmly Fix The Light Bar. It Is Quakeproof When Passing Through Rugged Terrain..
Features
- BRIGHT WHITE LIGHT: Made of high-quality LED chips and PC lens with high light transmittance, the light bar can efficiently light up the dark road.With IP67 waterproof rate, the light bar can effectively resist water and dust, avoiding moisture and condensation.
- ADJUSTABLE MOUNTING BRACKET: The pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier.The sturdy side mounting bracket can firmly fix the light bar. It is quakeproof when passing through rugged terrain.
- 16AWG WIRING HARNESS: Universal fit compatible with all automobiles boats and devices equipped with a 12V power source,Circuit Protection Power relay-safety protection and conversion circuit Blade fuse protects the circuit when overcurrent or short circuit occurs
- FITMENT TYPE: Specially designed for JK 2007-2017 for easier light mounting. Upper windshield is to install 52 light bar, while the lower windshield is to install bottom-mounted small led pod lights, remains ample to adjust.
- Package included 1 x 52Inch 300W LED Light Bar,2 x 4Inch 18W LED Light Bar ,1 x Windshield Frame Mounting Bracket and 16AWG Wiring Harness,2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 52.00 x 4.00 x 4.00 inches
Warranty: 2 year warranty.
See On Amazon #8
Nilight 2PCS Side-Mounted Brackets Universal Adjustable Mounting Brackets for LED Light Bar, 2 Years Warranty,Black
Asin: B09NBJWJRV | Model: 91070B | PartNumber: 91070B | Ean: 0812227035020 | UPC: 812227035020
Easy To Install: Mounting The Brackets On Your Led Light Bar And Tighten Anti-Loose Screws,Don't Need To Worry About Fall Down And Shaking.
Package Includes: 2Pcs Side-Mounted Brackets, Screws, Bolts And Mounting Tools.
Fitment: Apply To Most Side-Mounted Led Light Bars: 36W, 72W, 120W, 180W, 240W, 270W, 288W, 300W, 312W, 378W, 648W,783W,Etc.
Adjustable Bracket: The Light Bar Can Be Adjusted To 360 Degrees, Which Makes Changing Direction Of Light Beam Easier.
Features
- High Quality: It is made of strong and lightweight aluminum alloy material. The sturdy bracket can firmly fix the light bar, 0.5Inch bracket is thick enough to fix the light bar into its place and screws design makes the connection tightly. Quakeproof when passing through rugged terrain
- Adjustable Bracket: The light bar can be adjusted to 360 degrees, which makes changing direction of light beam easier
- Easy To Install: Mounting the brackets on your LED light bar and tighten anti-loose screws,don't need to worry about fall down and shaking
- Fitment: Apply to most side-mounted LED light bars: 36W, 72W, 120W, 180W, 240W, 270W, 288W, 300W, 312W, 378W, 648W,783W,etc
- Package Includes: 2pcs side-mounted brackets, screws, bolts and mounting tools
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: 2 Years Warranty
See On Amazon #9
Nilight 90044B Universal License Heavy Duty Steel Front Plate Mounting Bracket Holder for Off-Road LED Work Lamps Lighting Bars, 2 Years Warranty, Black
Asin: B0825QQ9DL | Model: 90044B | PartNumber: 90044B | Ean: 0732694520396 | UPC: 732694520396
Easy Installation: No Drilling, No Modification Required, Just Like To Replace A License Plate Using Its Mount Location, Usually Can Be Installed In 20 Minutes.
Package Includes: 1Pcs Universal License Plate Mount Bracket. 2 Years Warranty Honored By Nilight.
Wide Application: Fits For Almost All Cars, Jeep, Truck, Pickup, Suv, 4X4, Etc. Work With Most Off Road Auxiliary Lights, Fog Lights, Driving Lights, Led Work Lamp And Led Light Bars.
Universal: Fits Most Standard Vehicle License Plates And Auxiliary Lighting Systems With Front License Plate Holes.
Features
- Sturdy Bracket: High-quality aluminum alloy material and advanced production process, the mounting bracket is impact resistant and anti-corrosion
- UNIVERSAL: Fits most standard vehicle license plates and auxiliary lighting systems with front license plate holes
- Easy Installation: no drilling, no modification required, just like to replace a license plate using its mount location, usually can be installed in 20 minutes
- Wide Application: Fits for almost all cars, Jeep, truck, Pickup, SUV, 4x4, etc. Work with most off road Auxiliary lights, fog lights, driving lights, LED work lamp and LED light bars
- Package Includes: 1PCS Universal License Plate Mount Bracket. 2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 3.74 x 14.60 x 6.26 inches
Warranty: 2 Years Warranty
See On Amazon
Looking For Something Else?
Search