VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating
Asin: B084BN1ZT2 | Ean: 0716407033908 | UPC: 716407033908
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fits Your Car: Standard Sae Sizes Work For Most American Domestic Makes And Models; Set Includes The Following Sizes To Fit Main Bearing Tube – 1 Inch To 1-7/8 Inches, 1-5/16 Inches To 2-3/8 Inches, And 1-3/8 Inches To 2-7/8 Inches; Sizes Permanently Laser-Etched On Tool For Easy Identification; Each Tool Fits A Basic Slide Hammer With A 5/8-Inch X 18 Thread Pitch.
Package Contents: Package Includes (3) Rear Axle Bearing Removers And (1) Carrying Case For Your Convenience; Slide Hammer Not Included.
Easy Storage: Heavy-Duty Plastic Blow-Molded Carrying Case For Easy Transportation, Safe Storage, And Quick Organization.
Use The Vct Pneumatic Sae Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit To Service Semi-Floating Rear Axle Bearings On Your Vehicle; These Tools Make The Job Simple And Prevent Damage To Your Bearings When Pulling; Much Easier Than Claw-Type Axle Bearing Pullers That Slip Off And Chew Up The Old Bearings; For Removal Only, Not Intended For Installation.
Features
- EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out; The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage
- Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle; These tools make the job simple and prevent damage to your bearings when pulling; Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings; For removal only, not intended for installation
- FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models; Set includes the following sizes to fit main bearing tube 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches; Sizes permanently laser-etched on tool for easy identification; Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch
- EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
- PACKAGE CONTENTS: Package includes (3) rear axle bearing removers and (1) carrying case for your convenience; Slide hammer not included
- See more on Amazon...
Brand: VCT | Manufacturer: J&R Quality Tools
Dimensions: 3.00 x 9.00 x 5.00 inches
See On Amazon Similar To VCT Rear Axle Bearing Remover
#1
Orion Motor Tech Wheel Bearing Press Kit for Front Wheel Drive Bearing Removal & Installation, 24pc Wheel Bearing Puller Tool Set with Sliding Screws Universal Bushings Sleeves
Asin: B07GSQLCS4 | Model: 0701BL | PartNumber: 0701BL
Quick & Easy Operation: Two 8.8 Grade Sliding Screws With Precision Threading Firmly Hold Your Bearings And Let You Smoothly Pop Them Out Without Damage, Leaving The Steering Knuckle And Strut Assembly Untouched.
Compact & Portable: This 24 Piece Front Wheel Bearing Press Tool Set Comes With A Blow-Molded Storage Case, Keeping Everything Organized And Easy To Carry From Home Garage To Workshop.
Durable Construction: Made Of Premium Stainless Steel, This Wheel Bearing Removal Tool Set Provides Strong And Dependable Long-Lasting Service; The Sliding Screws Are Heat Treated And Blackened For Superior Strength And Corrosion Resistance.
Universal Compatibility: Our Versatile Wheel Bearing Press Kit Offers Multiple Sleeves And Bushings In Most Common Sizes To Work With Nearly Any Front Wheel Drive Automobile Or Light Truck, Whether Foreign Or Domestic.
Features
- WHEEL BEARING PULLER SET: This wheel bearing tool kit by Orion Motor Tech provides everything you need to let you quickly and easily remove and install your wheel bearings without hammering and front-end alignment
- UNIVERSAL COMPATIBILITY: Our versatile wheel bearing press kit offers multiple sleeves and bushings in most common sizes to work with nearly any front wheel drive automobile or light truck, whether foreign or domestic
- QUICK & EASY OPERATION: Two 8.8 grade sliding screws with precision threading firmly hold your bearings and let you smoothly pop them out without damage, leaving the steering knuckle and strut assembly untouched
- DURABLE CONSTRUCTION: Made of premium stainless steel, this wheel bearing removal tool set provides strong and dependable long-lasting service; the sliding screws are heat treated and blackened for superior strength and corrosion resistance
- COMPACT & PORTABLE: This 24 piece front wheel bearing press tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 15.55 x 16.93 x 4.72 Inches
Warranty: 1-YEAR WARRANTY
See On Amazon #2
Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS
Asin: B07BNMB42N | Model: 13 | PartNumber: 13
3.Wide Application: This Internal Bearing Puller Set's Expandable Collets And Threaded Screw Adapters Remove Tight And Jammed Axles, Bearings, And Bushings On A Wide Variety Of Vehicles Without Damaging The Removed Parts.
5.Blow-Molded Case: The Custom Blow-Molded Case Keeps Everything Organized And Easy To Carry Or Store As Needed.
4.Easy To Use: For Most Parts, Just Fit The Appropriate Collet, Lock It Into The Inner Race, And Pull The Slide Hammer's Weight Back To Easily Knock Out The Bearing Or Bushing; For Tighter Or More Delicate Operation, The Counterstay Can Be Slowly Tightened To More Carefully Extract The Part.
2.Heavy-Duty Construction: These Wheel Bearing Removal Tools Are Made From Aisi 1045 Medium Carbon Steel Forged And Galvanized For Long-Term Durability Under Even Punishing Use; The Collets In Particular Are Chromoly Steel To Handle Even The Most Stubborn Blind Bearings And Bushings Without Trouble.
Features
- 1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm)
- 2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble
- 3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts
- 4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing; for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part
- 5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 4.72 x 18.50 x 12.59 inches | Weight: 11.00 pounds
Warranty: 2 Years Warranty, Free Replace or Full Refund
See On Amazon #3
Orion Motor Tech Bearing Puller Set, 5 Ton Capacity Bearing Separator, Pinion Wheel Bearing Removal Kit with 2" and 3" Jaws, Wheel Hub Axle Puller Set, Heavy Duty Bearing Splitter Tool Kit
Asin: B0B2DF6LXT | Model: N014-BL | PartNumber: N014-BL
3. Wide Application: The 2 Bearing Splitter Jaws’ 5 Ton Capacity Ensures They Stand Up To Punishing Use; Suitable For Professionals And Home Mechanics And Compatible With Most Vehicles, Atvs, And Light Trucks.
5. Durable Construction: Constructed From Heat Treated Cr-V Steel With Black Oxide Finish, This Pinion Bearing Puller Set Ensures Corrosion Resistance And Long-Term Durability Under Even Punishing Use.
4. Effective Operation: The Knife Like Taper Feature Allows The Jaws To Get Behind Bearings To Securely Grip Any Bearing; The Included Tools Enable You To Reach And Remove Bearings In Tight Spaces Effectively.
2. All-In-One Tool Kit: Our Bearing Separator Set Includes A 3" Bearing Separator Jaw, 2" Bearing Separator Jaw, 6" Yoke, 6-1/4" Forcing Screw, Four 4" Extension Screws, Four 5" Extension Screws, And Two 4-1/2" L-Type Legs.
Features
- 1. VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels
- 2. ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3 bearing separator jaw, 2 bearing separator jaw, 6 yoke, 6-1/4 forcing screw, four 4 extension screws, four 5 extension screws, and two 4-1/2 L-type legs
- 3. WIDE APPLICATION: The 2 bearing splitter jaws 5 ton capacity ensures they stand up to punishing use; suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks
- 4. EFFECTIVE OPERATION: The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing; the included tools enable you to reach and remove bearings in tight spaces effectively
- 5. DURABLE CONSTRUCTION: Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Weight: 11.00 pounds
Warranty: 1 year
See On Amazon #4
OEMTOOLS 27059 Pilot Bearing Puller Attachment For Slide Hammer, 2-Jaw Puller Pilot Bearing Removal Tool, Fits 5/8 x 18, 3/4 x 16 Thread Rods, Slide Hammer Extension Compatible With OEMTOOLS 27033
Asin: B004FDGU20 | Model: 27059 | PartNumber: 27059 | Ean: 0732454032794, 0076812270597 | UPC: 076812270597, 732454032794
Broad Applications: These Small Slide Hammer Attachments Are Essential Puller Tools For Mechanic Shops And Garages That Service Clutches And Transmissions.
Durable Make: Each Slide Hammer Bearing Puller Is Crafted With Premium Materials For Longevity; Dependable And Resilient For Repeated Bearing Separator Performance.
Slide Hammer Ready: Ensure Smooth And Effective Operations With A Complete Slide Hammer Puller Set; Designed For Optimal Performance With Oemtools 27033 Slide Hammer.
Precision Bearing Removal: Two-Jaw Puller Tool Inserts Perfectly Behind Bearings For Safe Extraction Using A Light Duty Slide Hammer; Minimize Hassle And Reduce Risk Of Injury Or Damage.
Features
- Adaptable Design: Fits 5/8" x 18-thread and 3/4" x 16-thread pulling rods; Seal puller removes bearings, bushings, and other press-fit parts from a shaft without causing damage to the components
- Precision Bearing Removal: Two-jaw puller tool inserts perfectly behind bearings for safe extraction using a light duty slide hammer; Minimize hassle and reduce risk of injury or damage
- Broad Applications: These small slide hammer attachments are essential puller tools for mechanic shops and garages that service clutches and transmissions
- Slide Hammer Ready: Ensure smooth and effective operations with a complete slide hammer puller set; Designed for optimal performance with OEMTOOLS 27033 Slide Hammer
- Durable Make: Each slide hammer bearing puller is crafted with premium materials for longevity; Dependable and resilient for repeated bearing separator performance
- See more on Amazon...
First Available: 09/26/2011
Brand: OEMTOOLS | Manufacturer: Great Neck Saw
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.85 Pounds
See On Amazon #5
Orion Motor Tech Rear Axle Bearing Puller Tool Set, Rear Axle Bearing Remover Set, Rear Axle Bearing Removal Tool Kit with 3 Sizes 1 to 1-7/8, 1-5/16 to 2-3/8, & 1-3/8 to 2-7/8
Asin: B08FCZ7Z17 | Model: RA0300 | PartNumber: RA0300
Scratch-Free Service: The Washers On Our Bearing Pullers Distribute Your Tool's Force Evenly To Provide Sure Grip And Avoid The Damage Caused To Bearings And Casings By Claw-Type Pullers.
Superior Dependability: Each Of The 3 Pullers Is Constructed From 45# Structural Steel For Outstanding Strength And Durability; Each Piece Is Blackened With Galvanized Nuts To Offer Even Greater Longevity And Corrosion Resistance.
Wide Application: The Small, Medium, And Large Bearing Pullers Cover Inner Diameters From 1 To 1-7/8", 1-5/16" To 2-3/8", And 1-3/8" To 2-7/8" Respectively, Covering The Rear Axle Bearings Used In The Vast Majority Of Domestic Makes And Models.
Convenient Design: Laser-Etched Markings Clearly Identify Each Of The Three Pullers In Their Custom Carry Case, While Their Rotary Connectors Give You Easier Access In Narrow Spaces.
Features
- 3PC. BEARING PULLER SET: This 3-piece professional rear axle bearing removal tool set by Orion Motor Tech works with your 5/8" slide hammer to let you quickly and easily pop out worn or damaged semi-floating rear axle bearings
- CONVENIENT DESIGN: Laser-etched markings clearly identify each of the three pullers in their custom carry case, while their rotary connectors give you easier access in narrow spaces
- SCRATCH-FREE SERVICE: The washers on our bearing pullers distribute your tool's force evenly to provide sure grip and avoid the damage caused to bearings and casings by claw-type pullers
- WIDE APPLICATION: The small, medium, and large bearing pullers cover inner diameters from 1 to 1-7/8, 1-5/16 to 2-3/8, and 1-3/8 to 2-7/8 respectively, covering the rear axle bearings used in the vast majority of domestic makes and models
- SUPERIOR DEPENDABILITY: Each of the 3 pullers is constructed from 45# structural steel for outstanding strength and durability; each piece is blackened with galvanized nuts to offer even greater longevity and corrosion resistance
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 3.00 x 9.00 x 7.00 inches | Weight: 3.00 pounds
Warranty: 1 year warranty
See On Amazon #6
Handor 19PCS Front Wheel Drive Bearing Puller Press Hub Removal Installation Tool Kit Wheel Bearing Removal Kit
Asin: B0CPXLLRG1 | Model: 19PCS Front Wheel Drive Bearing Puller | PartNumber: 19PCS Front Wheel Drive Bearing Puller | Ean: 0749782218066 | UPC: 749782218066
【Comprehensive Package】 Our Kit Includes Essential Components To Facilitate Smooth Operations. You'll Receive 1 Steel Drift (38Mm), 2 Drifts (86Mm, 91Mm), 1 Receiver Sleeve (76Mm), 3 Hub Screws (M12 X 1.5Mm), 3 Hub Screws (M14 X 1.5Mm), And 9 Adapter Drifts (Ranging From 55.5Mm To 84Mm)..
【Versatile Compatibility】 Handor's Wheel Bearing Press Kit Is Suitable For A Wide Range Of Front-Wheel-Drive Vehicles, Including Cars, Light Trucks, And Vans. This Versatile Applicability Ensures That You Have The Right Tools On Hand For A Variety Of Automotive Maintenance Needs..
【Preservation Of Integral Assembly】 Handor's Wheel Bearing Press Kit Is Engineered To Enable Wheel Bearing Replacement While Maintaining The Integrity Of The Steering Knuckle And Strut Assembly On The Vehicle. This Innovative Approach Ensures Comprehensive Maintenance Without Disassembling Crucial Components..
Features
- Streamlined Bearing Maintenance Enhance your vehicle care routine with Handor's 19-Piece Front Wheel Bearing Tool Set. Purpose-built for the effortless removal and installation of front hub bearings, this kit prioritizes precision, reducing the risk of damage to both the hub and bearings for a smooth upkeep process.
- Preservation of Integral Assembly Handor's wheel bearing press kit is engineered to enable wheel bearing replacement while maintaining the integrity of the steering knuckle and strut assembly on the vehicle. This innovative approach ensures comprehensive maintenance without disassembling crucial components.
- Comprehensive Package Our kit includes essential components to facilitate smooth operations. You'll receive 1 Steel Drift (38mm), 2 Drifts (86mm, 91mm), 1 Receiver Sleeve (76mm), 3 Hub Screws (M12 x 1.5mm), 3 Hub Screws (M14 x 1.5mm), and 9 Adapter Drifts (ranging from 55.5mm to 84mm).
- Versatile Compatibility Handor's wheel bearing press kit is suitable for a wide range of front-wheel-drive vehicles, including cars, light trucks, and vans. This versatile applicability ensures that you have the right tools on hand for a variety of automotive maintenance needs.
- See more on Amazon...
Brand: Handor | Manufacturer: Handor
Warranty: 1 year
See On Amazon #7
Happy Shopping Day OriGlam Adjustable Two Jaw Bearing Gear Puller Remover Tool, 2 Inch Carbon Steel Pump Removing Kit for Motorcycle
Asin: B07GFLBY1R | Model: AMT_002_1 | PartNumber: AMT_002_1 | Ean: 4895192453569
√ Adjust Screw Design And Convenient To Repaired Different Size Gears And Bearing..
√ Fit For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel , Car Wheel, Machine Wheel And So On..
√ Give You Positive Pulling Power To Remove Bearings Groove Pulleys On Alternator And Power Steering Pumps..
√ Special Heat Treatment Processing. Long Use Life..
Features
- Made of overall chromium vanadium steel, it is durable.
- Special heat treatment processing. Long use life.
- Adjust screw design and convenient to repaired different size gears and bearing.
- Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
- Fit for automotive flywheel, motorcycle wheel, bicycle wheel , car wheel, machine wheel and so on.
- See more on Amazon...
Brand: OriGlam | Manufacturer: OriGlam
Dimensions: 0.79 x 5.91 x 3.94 inches
See On Amazon #8
Alltooetools Rear Axle Bearing Remove Puller Tool Kit Bearing Remover Set with Slide Hammer Yoke and 3 Adapters, 1" to 2-7/8" IDs
Asin: B0B631D1PD | Model: SF0382 | PartNumber: SF0382
The 5.5 Pound Slide Hammer And Its Sturdy T Handle Provide The Firm Grip And Torque Needed To Pop Out Worn And Damaged Seals And Other Press Fit Parts Using The Included Hook. With A Polished Chrome Exterior For Superior Durability And Performance..
The Handy Hook Offers Another Way To Remove Recalcitrant Bearings—And Also Works With Seals And Other Press Fits On Your Car Or Truck..
Lock The Slide Hammer Onto The 4-Point Yoke To Set Up A Flange Type Axle Puller That Will Let You Extract Parts With Threaded Holes, Including Stud Axles, Spur Gears, And More..
It Cludes 5/8" Slide Hammer, Yoke, Lock Nut, Hook And Adapter..
Features
- 8PC. SLIDE HAMMER SET: This 8-piece professional axle, bearing, and seal removal tool set provides a 5/8" slide hammer, yoke, locknut, hook, and adapters to let you quickly, easily, and safely repair rear axle problems on the vast majority of domestic cars and light trucks
- It cludes 5/8 Slide Hammer, Yoke, Lock Nut, Hook and Adapter.
- The 5.5 pound slide hammer and its sturdy T handle provide the firm grip and torque needed to pop out worn and damaged seals and other press fit parts using the included hook. With a polished chrome exterior for superior durability and performance.
- Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more.
- The handy hook offers another way to remove recalcitrant bearings and also works with seals and other press fits on your car or truck.
- See more on Amazon...
Brand: Alltooetools | Manufacturer: Alltooetools
Warranty: 30 Days
See On Amazon #9
FIVCLOK 3 Jaw Inner Pilot Bearing Puller Auto Bushing Carbon Steel Gear Extractor Wheel Bearing Puller Automotive Machine Tool Kit for Car SUV Motorcycle Motorbike
Asin: B0B54SX2BY | Model: WK-0987 | PartNumber: WK-0987
【Sturdy Structure】 The Internal Bearing Puller Has A Sturdy Structure, High-Strength Torque And High Toughness. As Long As The Small Wrench Is Turned Slightly, It Will Generate A Large Pulling Force, Which Can Be Slip-Resistant And Firmly Grasped, Saving Time And Saving When Using (Claw Length 80 Mm).
【Precautions】 The Claws Of The Bearing Puller Have Positive And Negative Installation Methods. Suitable All Sleeve Bearings With An Inner Diameter Of 1/2 "-2". Note: Please Keep Balance When Using It To Avoid Damage To The Hook Rod. If The Bearing Is Rusty, It Cannot Be Used (Stretching Range: 50-95Mm / 2.0-3.7 Inches).
【Widely Used】The 3 Jaw Pilot Bearing Puller Is Widely Used In Automobile Bearings, Motorcycle Electric Car Bearings, Mechanical Bearings,Etc. This Bearing Puller Is Easy To Operate, Easy To Use And Durable..
【High-Quality 】 The Inner Bearing Puller Is Made Of High-Quality Carbon Steel Through Forging And Special Heat Treatment Process, So That Our Bearing Puller Has High Strength, Toughness And Longer Service Life..
Features
- Excellent Design The Pilot Bearing Puller adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure the bearing puller stability during use.
- High-Quality The inner bearing puller is made of high-quality carbon steel through forging and special heat treatment process, so that our bearing puller has high strength, toughness and longer service life.
- Sturdy Structure The internal bearing puller has a sturdy structure, high-strength torque and high toughness. As long as the small wrench is turned slightly, it will generate a large pulling force, which can be slip-resistant and firmly grasped, saving time and saving when using (claw length 80 mm)
- Widely Used The 3 Jaw Pilot Bearing Puller is widely used in automobile bearings, motorcycle electric car bearings, mechanical bearings,etc. This bearing puller is easy to operate, easy to use and durable.
- Precautions The claws of the bearing puller have positive and negative installation methods. suitable all sleeve bearings with an inner diameter of 1/2 -2. Note: Please keep balance when using it to avoid damage to the hook rod. If the bearing is rusty, it cannot be used (Stretching range: 50-95mm / 2.0-3.7 inches)
- See more on Amazon...
Brand: FIVCLOK | Manufacturer: FIVCLOK
See On Amazon #10
RJSPHH 8629 Universal Wheel Bearing Hub Removal Tool Replace for ATD Tools, Compatible with All Axle Bolt Hubs (5, 6 and 8 Lug Hubs).
Asin: B0B14Z84KB | Ean: 0754525709923 | UPC: 754525709923
🚗 Made From Quality & High Strength Steel, Prevent Corrosion And Rust, Sturdy And Durable. 3/4” Steel Backing Plate And Reinforced Striking Plate For Long-Lasting Service..
🚗 1 Year Warranty For It.If You Have Any Problem ,Please Contact Us And We Will Respond You On 24 Hours.
🚗 Easy To Operate: Mount It To 2 Studs With Supplied Flange Nuts, Use A 5 Lbs Hammer To Knock Frozen Hubs Out Of Axles..
🚗 Without Damaging The Shaft, Safely Removes Frozen Hub Assemblies Instantly.
Features
- Universal installation is suitable for all axle bolted hubs (5, 6 and 8 lug hubs)
- Without damaging the shaft, Safely removes frozen hub assemblies instantly
- Made from quality & high strength steel, prevent corrosion and rust, sturdy and durable. 3/4 steel backing plate and reinforced striking plate for long-lasting service.
- Easy to Operate: Mount it to 2 studs with supplied flange nuts, use a 5 lbs hammer to knock frozen hubs out of axles.
- 1 year warranty for it.If you have any problem ,please contact us and we will respond you on 24 hours
- See more on Amazon...
Brand: RJSPHH | Manufacturer: RJSPHH
See On Amazon #11
Socpuro Universal Front Wheel Bearing Puller & Rear Axle Puller Set, 2 Pack Flange Type Wheel Hub Axle Remover Tools Kit with Forcing Bolt and Socket (M16x1.5)
Asin: B0C49KSRHF | Model: SCP-030 | PartNumber: SCP-030
【Simple To Operate】 Simply Use The Existing Lug Nuts To Fix To The Wheel Studs And Tighten The Forcing Bolts. The Threads Of Our 5Lb Forced Bolts Can Be Used With Other M16x1.5 Bolt Or Slide Hammer To Handle A Variety Of Vehicle Models Or Other Work Around The Engine.（Not Fit For Your 5/8"×18 Bolt Converters Or Slide Hammers. ）.
【Sturdy Quality】 Socpuro Wheel Hub Axle Pullers Are Made From High Quality Alloy Steel, Heat Treated And Blackened Or Chrome Plated, Offering Excellent Durability And Corrosion Resistance For Long Term Durability..
【Pull-Through】The Puller Fits Snugly Into The Hub Of The Tapered Axle And Works In Conjunction With The Tapered Forcing Bolt To Provide A Straight And Even Pull, Allowing Your Front Hub To Pop Cleanly Out, Keeping The Wheel Bearing In The Joint And The Rest Of The Vehicle Intact..
【Universal Compatibility】 The Front Hub Puller（3-3/4" To 4-1/2"） Is Compatible With Most Vehicles With Independent Front Wheel Suspension. The Rear Axle Puller（4-1/2" To 5-1/2" ）Is Designed To Pull Out The Rear Flange Type Axle. Hub & Axle Grapplers Fit 4, 5 Or 6 Bolt Stud Designs And All Non-C Lock Gm Axles..
Features
- What You Get Socpuro flanged hub axle puller kit includes universal 3-3/4" to 4-1/2" hub puller, 4-1/2" to 5-1/2" axle puller, M16x1.5 forced bolt and 19mm sockets, fastening nut. Practical tools for quick and easy loosening and removal of hubs, axles, etc. (NOTE: Please check size compatibility before purchasing.)
- Universal Compatibility The front hub puller 3-3/4 to 4-1/2 is compatible with most vehicles with independent front wheel suspension. The rear axle puller 4-1/2 to 5-1/2 is designed to pull out the rear flange type axle. Hub & axle grapplers fit 4, 5 or 6 bolt stud designs and all non-C lock GM axles.
- Simple to Operate Simply use the existing lug nuts to fix to the wheel studs and tighten the forcing bolts. The threads of our 5lb forced bolts can be used with other M16x1.5 bolt or slide hammer to handle a variety of vehicle models or other work around the engine. NOT fit for your 5/8 18 bolt converters or slide hammers.
- Pull-through The puller fits snugly into the hub of the tapered axle and works in conjunction with the tapered forcing bolt to provide a straight and even pull, allowing your front hub to pop cleanly out, keeping the wheel bearing in the joint and the rest of the vehicle intact.
- Sturdy Quality Socpuro wheel hub axle pullers are made from high quality alloy steel, heat treated and blackened or chrome plated, offering excellent durability and corrosion resistance for long term durability.
- See more on Amazon...
Brand: Socpuro | Manufacturer: Socpuro
Warranty: 3 month manufacturer
See On Amazon #12
DISEN Bearing Puller, Bearing Puller Kit, 35-in-1 Blind Bearing Puller Set, Bearing Separator with Portable Storage Case, Come with Wrench (Please Refer to The Video for Installation and Usage)
Asin: B0CNVVZVPP | Model: ZCLM | PartNumber: ZCLM
【Ultra Hard Cast And Corrosion Resistance】 - Disen Bearing Removal Tools Are Made Of Heat-Treated High Hardness Cast Iron Steel Instead Of Laser-Cut, Less Durable Cast Steel Plates. Coated With Black Oxide Finish Ensures Corrosion Resistance And Long-Term Durability..
【Convenient And Practical Storage Case】- Disen Blind Bearing Puller Kit Comes With A Sturdy And Portable Black Storage Case, Which Makes It Easy To Carry And Store. The Bearing Separator And Accessories Are Well Organized, And You Can Quickly Find The Right Tool For The Job..
【Applicable Bearing Models】6005 / 6006 / 6007 / 6008 / 6009 / 6010 / 6205 / 6206 / 6207 / 6208 / 6209 / 6210 / 6305 / 6306 / 6307 / 6308 / 6309 / 6310. These Pinion Bearing Pullers Can Also Remove More Different Types Of Bearings, Gears And Kits..
【35-Pieces Package Included】- Disen Bearing Puller Set Includes 1 Threaded Rod, 6 Sets Of Different Sizes Collets(3 In A Set) And 3 Claws, 3 Pull Rods For Connetting Claws Or Collets, 1 Disc For Load Bearing, 2 Heightening Bases For Bearing Requiring Longer Distances, 1 L Shaped Wrench, 3 Screw Nuts And 3 Spacers ; 35-In-1 Can Meet The Needs Of Different Types Of Small And Medium Bearings..
【Comes With An L Shaped Wrench】- Considering That Pulling A Bearing Out Requires A Strong Tool To Rotate The Threaded Rod, Disen Bearing Pullers Kit Equipped With An L Shaped Angled Hex Socket Wrench, Making This Bearing Puller Tool More Convenient And Practical In Use Without Having To Look For Other Wrenches..
Features
- Idea Bearing Pulling Tool - Clamping the bearing through claws or collets, and then pull the bearing out by rotating the threaded rod, which is designed to remove bearings, pulleys, gears, wheels, etc. (Please Refer to the Video for Usage)
- Comes with an L Shaped Wrench - Considering that pulling a bearing out requires a strong tool to rotate the threaded rod, DISEN bearing pullers kit equipped with an L shaped Angled Hex Socket Wrench, making this bearing puller tool more convenient and practical in use without having to look for other wrenches.
- Ultra Hard Cast and Corrosion Resistance - DISEN bearing removal tools are made of heat-treated high hardness cast iron steel instead of laser-cut, less durable cast steel plates. Coated with black oxide finish ensures corrosion resistance and long-term durability.
- 35-pieces Package Included - DISEN Bearing puller set includes 1 threaded rod, 6 sets of different sizes collets(3 in a set) and 3 claws, 3 pull rods for connetting claws or collets, 1 disc for load bearing, 2 heightening bases for bearing requiring longer distances, 1 L shaped wrench, 3 screw nuts and 3 spacers ; 35-in-1 can meet the needs of different types of small and medium bearings.
- Convenient and Practical Storage Case - DISEN blind bearing puller kit comes with a sturdy and portable black storage case, which makes it easy to carry and store. The bearing separator and accessories are well organized, and you can quickly find the right tool for the job.
- Applicable Bearing Models 6005 / 6006 / 6007 / 6008 / 6009 / 6010 / 6205 / 6206 / 6207 / 6208 / 6209 / 6210 / 6305 / 6306 / 6307 / 6308 / 6309 / 6310. These pinion bearing pullers can also remove more different types of bearings, gears and kits.
- See more on Amazon...
Brand: DISEN | Manufacturer: DISEN
See On Amazon #13
Powerbuilt Master Axle Puller Tool Set, Remove Car Front and Rear, Bearings and Seals, Vehicle Repair 21 Piece Kit - 648611, Silver
Asin: B0028QGTCM | Model: 648611 | PartNumber: 648611 | Ean: 0028907230306 | UPC: 028907230306
Built To Exceed Tool Standards.
Also Includes Carry Case.
Can Also Be Used As A Slide Hammer For Dent Pulling And Gear Pulling Duty.
Includes Usage Instructions And Photos.
Removes Front And Rear Axles, Axle Bearings And Seals From Front And Rear Wheel Drive Vehicles.
Tool Solutions For Most All Situations.
Features
- Made to be the most reliable tools in the market today
- Tool solutions for most all situations
- Built to exceed tool standards
- Removes front and rear axles, axle bearings and seals from front and rear wheel drive vehicles
- Can also be used as a slide hammer for dent pulling and gear pulling duty
- Includes usage instructions and photos
- Also includes carry case
- See more on Amazon...
First Available: 11/25/2013
Brand: Powerbuilt | Manufacturer: Alltrade Tools
Dimensions: 6.75 x 24.75 x 9.50 inches | Weight: 19.54 Pounds
See On Amazon #14
VEVOR Bearing Puller Kit 14-Piece, 5 Ton Bearing Separator, Pinion Wheel Bearing Removal Kit with 2" and 3" Jaws, Bearing Separator and Puller Set, Heavy Duty Bearing Splitter Tool Kit with Case
Asin: B0CX1BV6QD | Model: ZX-B012 | PartNumber: ZX-B012 | Ean: 0197988631101 | UPC: 197988631101
Precision Operation: Assemble The Extension Screws Quickly, And The Extension Screw Provides Ample Operating Space To Handle Bearings Of Different Sizes. You Can Also Attach 2 Puller Legs For A Claw-Type Pulling Approach, Suitable For Both Horizontal And Vertical Operations. The 8.8-Grade Thread On The Screw Ensures High Strength And Powerful Pressure, While The Ball-End Screw Makes Rotation Easier, Ensuring Uniform Force Distribution..
Complete 14-Piece Set: Our Bearing Separator Set Includes 2 Separators, 4 Hex Push-Puller Legs, 4 Extension Screws, 1 Lead Screw, 2 Puller Legs, And 1 Yoke. Everything Is Neatly Organized In A Dustproof And Waterproof Storage Box, Making It Easy To Carry And Store. This Comprehensive Bearing Splitter Tool Kit Ensures You Have The Right Tool For The Job Every Time..
Built To Last: Crafted From High-Hardness 45# Steel, Our Pinion Wheel Bearing Removal Kit Is Designed To Resist Deformation And Damage. Heat Treatment Strengthens The Steel, Making It Durable. All The Components Are Coated With An Anti-Rust Coating That Is Resistant To Wear And Tear And Provides Protection Against Corrosion From Chemicals And Oil..
Up To 5 Tons Of Force: With A Maximum Pull Capacity Of 5 Tons, Our Bearing Splitter Tool Kit Can Handle Most Vehicles, All-Terrain Vehicles, And Light Trucks. The Knife-Shaped Taper Feature Enhances Grip, Ensuring A Secure Hold On The Bearing, Preventing Slippage, And Enabling Efficient Disassembly Even In Tight Spaces..
Features
- Two Sizes, Unlimited Compatibility: Our bearing puller set comes with two different separator sizes. The large bearing separator jaw provides an adjustable range of 2.0-2.8 inches ( 50- 70 mm), while the small bearing separator jaw adjusts from 1.2-2.0 inches ( 30- 50mm). This versatility makes our bear puller set suitable for various bearing, gear, pulley, and steering wheel sizes.
- Up to 5 Tons of Force: With a maximum pull capacity of 5 tons, our bearing splitter tool kit can handle most vehicles, all-terrain vehicles, and light trucks. The knife-shaped taper feature enhances grip, ensuring a secure hold on the bearing, preventing slippage, and enabling efficient disassembly even in tight spaces.
- Precision Operation: Assemble the extension screws quickly, and the extension screw provides ample operating space to handle bearings of different sizes. You can also attach 2 puller legs for a claw-type pulling approach, suitable for both horizontal and vertical operations. The 8.8-grade thread on the screw ensures high strength and powerful pressure, while the ball-end screw makes rotation easier, ensuring uniform force distribution.
- Built to Last: Crafted from high-hardness 45# steel, our pinion wheel bearing removal kit is designed to resist deformation and damage. Heat treatment strengthens the steel, making it durable. All the components are coated with an anti-rust coating that is resistant to wear and tear and provides protection against corrosion from chemicals and oil.
- Complete 14-Piece Set: Our bearing separator set includes 2 separators, 4 hex push-puller legs, 4 extension screws, 1 lead screw, 2 puller legs, and 1 yoke. Everything is neatly organized in a dustproof and waterproof storage box, making it easy to carry and store. This comprehensive bearing splitter tool kit ensures you have the right tool for the job every time.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 2.48 x 14.17 x 9.06 inches | Weight: 10.58 pounds
See On Amazon #15
GEARWRENCH 3 Pc. Rear Axle Bearing Puller Set - 41710
Asin: B000NICERQ | Model: 41710 | PartNumber: 41710
Ean: 0082171417108, 0013222097574, 0784497101661, 6935743348406, 7439453498660, 0796346131651, 0787721811954, 0094704664699
UPC: 787721811954, 013222097574, 082171417108, 796346131651, 094704664699, 784497101661
1-5/16 " X 2-3/8" Puller.
1" X 1-7/8" Puller.
Features
- Three pullers designed to make the removal of semi-floating rear axle bearings easier
- 1 x 1-7/8 puller
- 1-5/16 x 2-3/8 puller
- See more on Amazon...
Brand: GearWrench | Manufacturer: KD Tools
Dimensions: 2.50 x 12.00 x 6.00 inches | Weight: 2.95 Pounds
See On Amazon #16
Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set, Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1" to 2-7/8" IDs
Asin: B08FD19XFG | Model: RA0700 | PartNumber: RA0700
Seal Puller Set: The 2.5 Pound Slide Hammer And Its Sturdy T Handle Provide The Firm Grip And Torque Needed To Pop Out Worn And Damaged Seals And Other Press Fit Parts Using The Included Hook.
Superior Dependability: This Versatile Slide Hammer Puller Set Is Constructed From Aisi 1045 Medium Carbon Steel For Outstanding Strength And Durability; The Hammer Is Chrome-Plated, Its Yoke Is Galvanized, And Each Adapter Is Blackened To Give You Even Greater Performance, Strength, And Longevity.
Bearing Puller Set: The Small, Medium, And Large Bearing Puller Adapters Cover Inner Diameters From 1 To 1-7/8", 1-5/16" To 2-3/8", And 1-3/8" To 2-7/8" Respectively To Remove Semi-Floating Rear Axle Bearings.
Axle Puller Set: Lock The Slide Hammer Onto The 4-Point Yoke To Set Up A Flange Type Axle Puller That Will Let You Extract Parts With Threaded Holes, Including Stud Axles, Spur Gears, And More.
Features
- 8PC. SLIDE HAMMER SET: This 8-piece professional axle, bearing, and seal removal tool set by Orion Motor Tech provides a 5/8" slide hammer, yoke, locknut, hook, and adapters to let you quickly, easily, and safely repair rear axle problems on the vast majority of domestic cars and light trucks
- AXLE PULLER SET: Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more
- SEAL PULLER SET: The 2.5 pound slide hammer and its sturdy T handle provide the firm grip and torque needed to pop out worn and damaged seals and other press fit parts using the included hook
- BEARING PULLER SET: The small, medium, and large bearing puller adapters cover inner diameters from 1 to 1-7/8, 1-5/16 to 2-3/8, and 1-3/8 to 2-7/8 respectively to remove semi-floating rear axle bearings
- SUPERIOR DEPENDABILITY: This versatile slide hammer puller set is constructed from AISI 1045 medium carbon steel for outstanding strength and durability; the hammer is chrome-plated, its yoke is galvanized, and each adapter is blackened to give you even greater performance, strength, and longevity
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 3.00 x 18.00 x 10.00 inches | Weight: 10.00 pounds
Warranty: 1 year warranty
See On Amazon #17
DAYUAN 19pcs Front Wheel Drive Bearing Removal Installation Service Tool Kit FWD Bearing Install Master Set Wheel Bearing Removal Kit
Asin: B07T7DK674 | Model: YT-98010 | PartNumber: YT-98010 | Ean: 0788537801887 | UPC: 788537801887
【Drift Size】: 2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" And 3-19/32" (55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91Mm).
【Portability】: Comes With A Durable Storage Case, Convenient To Collect The Tools And Transport..
【Material】:The Front Wheel Bearing Removal Kit Is Made Of High Quality Steel And Also Come With A Corrosion And Rust Resistant Black Oxide Finish..
【Compatiblity】: Suitable For Most Front Wheel Drive Cars, Light Trucks And Vans..
Features
- APPLICATION The Front Wheel Drive Bearing Adapter Kit can offer you a fast and effective removal and installation of wheel bearings on front wheel drive vehicles; easily replaces wheel bearings while keeping the steering knuckle and strut assembled in tact on the vehicle.This eliminates the need for front end alignment after finish the wheel bearing replacement work.
- COMPATIBLITY : Suitable for most front wheel drive cars, light trucks and vans.
- Drift Size : 2-3/16, 2-11/32, 2-7/16, 2-9/16, 2-19/32, 2-13/16, 2-7/8, 3-3/32, 3-5/16, 3. 3-13/32 and 3-19/32 (55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm)
- MATERIAL :The Front Wheel Bearing Removal Kit is made of high quality steel and also come with a corrosion and rust resistant black oxide finish.
- PORTABILITY : Comes with a durable storage case, convenient to collect the tools and transport.
- See more on Amazon...
Brand: DAYUAN | Manufacturer: Yinyuan Tools
Dimensions: 3.54 x 24.02 x 19.29 inches
See On Amazon #18
DAYUAN 23pcs FWD Front Wheel Drive Bearing Removal Tool, Wheel Bearing Press Kit Bearing Adapters Bearing Installer Tool
Asin: B075N1FRDL | Model: YT1085 | PartNumber: YT1085 | Ean: 0710627034189 | UPC: 710627034189
No More Need For Front End Alignment After Service Work..
Comes With A Heavy Duty Plastic Case For Easy Storage And Transportation, It Also Protect And Extend The Life Of Your Tools..
High Performance Of Anti-Rust, Due To The Heavy-Duty Carbon Steel Construction And Black Anodic Oxidation Coating..
Provide You All The Parts You Need To Remove And Install The Front Wheel Drive Bearings. You Can Replaces Wheel Bearings While The Steering Knuckle And Strut Is Assembled In Tact On The Vehicle..
Features
- Compatible with most of the front wheel drive cars and samll trucks.
- Provide you all the parts you need to remove and install the front wheel drive bearings. You can replaces wheel bearings while the steering knuckle and strut is assembled in tact on the vehicle.
- No more need for front end alignment after service work.
- High performance of anti-rust, due to the heavy-duty carbon steel construction and black anodic oxidation coating.
- Comes with a heavy duty plastic case for easy storage and transportation, it also protect and extend the life of your tools.
- See more on Amazon...
Brand: DAYUAN | Manufacturer: Yinyuan Tools
Warranty: 1 year
See On Amazon #19
ATP 14PCS Bearing Separator Puller Set 2" and 3" Splitters Remove Bearings Kit
Asin: B075Z6JRDD | Model: 8542036296 | PartNumber: 8542036296 | Ean: 0687926000095 | UPC: 687926000095
2" And 3" Size Separators, 5" Puller Crossbar, 6-1/4" Lead Screw.
Evenly Applies Pressure To Smoothly Separate Bearings And Remove Gears Without Damage.
Forged, Heat Treated Steel Attachments, See Detailed Part List Below In Product Details.
2 Bearing Separators Ranging In Size For Sizes 9/32" To 3" In Diameter.
Features
- Removes gears, pulleys, bearings, steering wheels, + more
- 2 Bearing separators ranging in size for sizes 9/32 to 3 in diameter
- 2 and 3 size separators, 5 puller crossbar, 6-1/4 lead screw
- Forged, heat treated steel attachments, see detailed part list below in Product Details
- Evenly applies pressure to smoothly separate bearings and remove gears without damage
- See more on Amazon...
Brand: ATP | Manufacturer: ATP
Dimensions: 3.15 x 13.78 x 10.63 inches
See On Amazon #20
KZINO 14Pcs Bearing Puller Set, 5 Ton Capacity Bearing Splitter Tool Kit w/Case, Pinion Wheel Bearing Removal Kit w/ 2" and 3" Jaws, Heavy Duty Wheel Hub Axle Puller Set, Bearing Splitter Tool Kit
Asin: B0CDMH4D3N | Model: BCLBQ-0802 | PartNumber: BCLBQ-0802
👍【 Efficient Operation 】 The Bearing Splitter Tool Kit Includes Two Widely Used Bearing Separator Jaws, Which Can Help Complete Various Bearing Pulling Tasks. The Capacity Of 5 Tons And Heavy-Duty Industrial Grade Bolts Ensure That The Tool Will Not Bend Or Break During Operation. Assembling By Professionals Or Doing It Yourself Requires Almost No Effort..
🛠【Widely Applicable】 Our Bearing Separator Kit Includes Two-Piece Bearing Separator Jaws Suitable For Most Small And Large Wheel Bearings And Gears. The 14 Piece Push-Pull Leg And Extended Leg Are Suitable For Most Different Lengths Of Shaft. This Toolset Is Very Suitable For Towing Gears, Pulleys, Bearings, Axles, Pinions, And Steering Wheels On Cars, Vehicles, Atvs, And Light Trucks..
🛠【Premium Materials Bearing Puller Kit】This Gear Puller Adopts A Sturdy Drop Hammer Forging Structure And Is Made Of Heat-Treated High Hardness 45 # Carbon Steel. Coated With Black Oxide Coating, It Has Super Strength And Long-Term Durability, And Can Withstand Rough Operations On Stubborn Bearings And Gears..
Features
- Multi-functional Practical Bearing Puller Kit KZINO 5-ton Capacity Bearing Puller Kit includes 2-piece maximum opening bearing separator jaws (2 ', 3' '), 1-piece heavy-duty forcing screws (7' '), 4-piece hexagonal push pull legs (4', 5 '') 4-piece hexagonal extension legs (4 '', 5 ''. Includes all traction components to help you efficiently and quickly remove and install large and small wheel bearings on most car front and rear wheels, gears, pulleys, half shafts, and pinions.
- Premium Materials Bearing Puller Kit This gear puller adopts a sturdy drop hammer forging structure and is made of heat-treated high hardness 45 # carbon steel. Coated with black oxide coating, it has super strength and long-term durability, and can withstand rough operations on stubborn bearings and gears.
- Efficient operation The Bearing Splitter Tool Kit includes two widely used bearing separator jaws, which can help complete various bearing pulling tasks. The capacity of 5 tons and heavy-duty industrial grade bolts ensure that the tool will not bend or break during operation. Assembling by professionals or doing it yourself requires almost no effort.
- Widely Applicable Our bearing separator kit includes two-piece bearing separator jaws suitable for most small and large wheel bearings and gears. The 14 piece push-pull leg and extended leg are suitable for most different lengths of shaft. This toolset is very suitable for towing gears, pulleys, bearings, axles, pinions, and steering wheels on cars, vehicles, ATVs, and light trucks.
- See more on Amazon...
Brand: KZINO | Manufacturer: KZINO
See On Amazon
Looking For Something Else?
Search