Ade Advanced Optics Zantitium RD3-015 Red Dot Reflex Sight for Ruger 10/22, Black
Asin: B086FT1QH4 | Ean: 0640978388498 | UPC: 640978388498
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.New Advanced Battery Technology Gives Up To 2000 Hours On Bright Setting And Up To 30K Hours On Low Setting With A Cr2032 Coin Battery(Included).Red Dot Does Not Auto Power Off. It Stays On Til Use Manually Power Off. It Has Multi Brightness Level With One Adjustment Button. Every Time You Turn On The Dot It Stays The Same B Rightness Level Last Time It Was Turned Off. The Lowest Setting Is Invisible By Human Eye That Is For Using With A Night Vision.
Ade Contract Factory Is Already Supplying For Other Name Brands That Retails For 2-3 Times More..
Waterproof/Shockproof/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Top Load System, No Need To Remove The Sight To Change The Battery. 4 Moa Dot. Come With Protected Cover, Adjustment Wrench, Adjustment Dialing Plate, User Manual, Installation Screws And Picatinny Mounting Plate..
Features
- Comes with an optic adapter/mounting plate to connect red dot sight to Ruger 10/22 and also a standard picatinny mount.
- Top load System, no need to Remove the sight to change the Battery. 4 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate.
- New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Coin Battery(Included).Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
- Waterproof/Shockproof/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- ADE contract factory is already supplying for other name brands that retails for 2-3 times more.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Warranty: 1 year manufacturer
See On Amazon Similar To Ade Advanced Optics Zantitium RD3015
#1
Ade Advanced Optics RD3-006B Green Dot Sight for Handgun - Not Red
Asin: B074ZTGXKJ | Model: RD3-006B | PartNumber: RD3-006B | Ean: 0640978398459 | UPC: 640978398459
Since Its Initial Release In 2014, We've Implemented Numerous Improvements To Enhance Its Durability, Ensuring It Can Withstand Recoil While Also Improving Its Ability To Hold Zero. The Front Switch, Battery Housing, And Hardware Have All Been Recently Updated, Reflecting Our Commitment To Continuous Enhancement. This Product Is Proudly Designed In Oregon..
Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Nuwa Pro And Rd3-030 Apollo Fit Optic Cut/Optic Plate That Is Compatible With Shield Rms/Rmsc/Deltapoint Pro Footprint.
Ade Rd3-021C Nuwacc Fits Optic Cut/Optic Plate That Is Compatible With Trijicon Rmrcc Footprint.
If You're Not Seeing A Perfect Round Dot But Instead Observe A Splashed Dot, Half-Moon Shape, Multi-Dot, Or Starburst, There's A High Probability (99%) That You Might Have Astigmatism Without Being Aware Of It. What You Perceive Is Likely A Small Reflection Of The Led Light On The Lens. A Quick And Simple Way To Confirm This Is By Using Your Cellphone To Take A Photo Of The Dot. If The Photo Shows A Circular Dot, You've Essentially Diagnosed Yourself With Astigmatism..
Ade Rd3-006 Huracan,Rd3-009 Crusader,Rd3-012 Delta, Rd3-012 Pro, Rd3-013 Bertrillium ,Rd3-015 Zantitium, Rd3-028 Ares Fit Optic Cut/Plate That Is Compatible With Vortex Venom/Burris Fastfire/Doctor Footprint.
Although It's Feasible To Install The Optic On A Handgun Without The Assistance Of A Gunsmith, We Highly Recommend Seeking The Expertise Of A Professional For The Installation Process. It's Essential To Note That Unprofessional Installations, Such As Improper Torque Application, Can Lead To Issues Like Loose Screws, An Inability To Hold Zero, Damage To The Firearm Or Optic, And Even Pose A Risk Of Personal Injury..
Ade Rd3-019 Stingray, Rd3-020 Raptor, Rd3-022 Artemis, Rd3-023 Valkyrie And Rd3-029 Trumpet Fit Optic Cut/Optic Plate/ That Is Compatible With Trijicon Rmr/Sro/Holosun 407C/507C Footprint.
The On/Off Switch For This Sight Is Conveniently Positioned At The Front, Making It Much Easier To Press Compared To Red Dots With Side-Mounted Switches. It Features A 3 Moa Dot Size And Offers 5 Illumination Settings. The Sight Is Fully Adjustable For Windage And Elevation And Can Be Locked Into Place. With Unlimited Eye Relief And Various Illumination Settings, It Is Powered By An Included Lithium Cr2032 Battery..
Features
- This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint Plate/Slide seamlessly.
- The on/off switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.
- Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.
- Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.
- If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability (99%) that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.
- ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint
- ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint
- ADE RD3-021c NUWAcc fits optic cut/optic plate that is compatible with Trijicon RMRcc footprint
- ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Dimensions: 2.50 x 4.80 x 2.00 inches | Weight: 0.40 pounds
Warranty: 1 year
See On Amazon #2
ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire
Asin: B01L9734Y6 | Model: glock | PartNumber: glock | Ean: 0710500205576 | UPC: 710500205576
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium), Vortex Venom/Viper, Burris Fastfire, Meopta, Shield, Docter, Insight Red Dots..
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation. We Highly Recommend Diy Only If User Has Gunsmith Experiense, Or Hiring A Gunsmith To Install This Optic Plate. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
This Optic Mounting Plate Also Fits Other Red Dot Brands Such As Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not Fit Trijicon Rmr/Holosun/Shield Footprint Red Dots..
The Included Glock Plate Fit Some Other Pistols Such As Canik Tp9sf(Does Not Fit Sfx, Combat, Sa). This Glock Plate Also Fits Taurus Gx4, G3c & G3 With Factory Steel Sights (Does Not Fit Any Other Taurus Models Such As G2/G2c/G3 Without Factory Steel Sight/Tx22/Pt111) Because Those Pistols Made The Rear Sight Dovetail Based On The Glock Rear Sight Dovetail Specifications..
Features
- This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100 . Does NOT fit Glock with AFTERMARKET slide with optic cut.
- The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots.
- This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.01 Pounds
See On Amazon #3
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Vortex Venom/Viper Red Dot Sights
Asin: B08L5K1MWC
For Using On Ade Rd3-006 Haracan, Rd3-009 Crusader, Rd3-012 Delta, Rd3-013 Bertrillium, Rd3-015 Zantitium Red Dot Sight.
Finished In A Matte Black Anodize. Comes With Two M3x6mm Screws.
Compatible With Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech Mrds, Sightmark Mini Shot Red Dot Sights.
It Is A Picatinny Mount, To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Precision CNC Machined from Aircraft Grade Aluminum
- It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
- Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights
- Finished in a Matte Black Anodize. Comes with two M3x6mm screws
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #4
Optic Mount Plate for Taurus PT111 G2, Millennium G2, G2, G3 and TX22 to fit on Holosun 507K,407K, Riton MPR D2, Riton MPR D2, Riton 3 Tactix MPRD,Vortex Venom,Burris Fastfire,Meopta, Docter Red Dot
Asin: B09BBQVHMC
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo X (Sorx1200 Only), Vortex Viper, Vortex Venom, Vortex Defender Ccw, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex Sight 2+, Docter/Noblex Sight Iii, Docter/Noblex Quicksight 5.0 Vr, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3.
Also Fits: Delta Optical Minidot, Delta Optical Minidot Ii, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, Makdot 1×25, Vector Optics Scrd-19Ii Frenzy 1X17x24, Creative Xp Glasseagle Hd, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Dragonfly, Hex Wasp, Crimson Trace Ct Rad Pro, Crimson Trace Cts-1550, Crimson Trace Cts-1250, Cyelee Calf V2, Cyelee Cat Pro, Or Vomz Pilad 1×20..
*** The Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo Zero, Romeo X (Sorx1200 Only), Vortex Defender Ccw, Holosun 507K, Holosun 407K, Sightmark Mini, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Wasp, Cyelee Cat Pro, Crimson Trace Cts-1550, And Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Pro, Rd3-030 Apollo Mount Using The Rear Set Of Mounting Holes And Do Not Use The Locating Pins At The Front Of The Plate. **.
Features
- This optic plate is made to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo). Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- *** The JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo Zero, Romeo X (SORX1200 only), Vortex Defender CCW, Holosun 507K, Holosun 407K, Sightmark Mini, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Wasp, Cyelee CAT PRO, Crimson Trace CTS-1550, and ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 PRO, RD3-030 Apollo mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. **
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo X (SORX1200 only), Vortex Viper, Vortex Venom, Vortex Defender CCW, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III, Docter/Noblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3
- Also Fits: Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1 25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1 25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Crimson Trace CTS-1550, Crimson Trace CTS-1250, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1 20.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.00 Pounds
See On Amazon #5
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Doctor, Burris Fastfire 1 2 3 4, Vortex Venom Red Dot Sights
Asin: B08L5KWBQ4
For Using On Ade Rd3-006 Haracan, Rd3-009 Crusader, Rd3-012 Delta, Rd3-013 Bertrillium, Rd3-015 Zantitium Red Dot Sight.
Finished In A Matte Black Anodize. Comes With Two M3x6mm Screws.
Compatible With Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech Mrds, Sightmark Mini Shot Red Dot Sights.
It Is A Picatinny Mount, To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Precision CNC Machined from Aircraft Grade Aluminum
- It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
- Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights
- Finished in a Matte Black Anodize. Comes with two M3x6mm screws
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #6
Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD, XDE, XD MOD.2, XD(M), XDM, XDS Pistol
Asin: B087H5GHCR
Fit Ade Rd3-006A(Huracan), Rd3-006B(Cobra), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot..
Hiring A Gunsmith Is Highly Recommended, Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury. Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Instsallation. Including Two Align Pins To Attach To Any Of The Four Corner Holes To Prevent Any Movement..
There Are Two Parts Of This Plate. This Small Dovetail Insert Plate Basically Replaces The Rear Sight Using Two Jam Screws. The Big Plate Uses Two Silver Alignment Pins At 2 Of The 4 Corner Holes For The Optic To Sit In..
It Is Design To For Springfield Non-Osp(Non Optics Ready) Xd/Xds/Xdm Pistols That Do Not Has A Optic Cut. This Plate Is For Replacing Rear Sight. It Also Fits Non-Osp Hellcat. It Does Not Fit 5.25″ Xdm Competition Series. This New Plate Is An Re-Designed Version To Replace The Old E1/E2 Plate For Springfield Xd That Always Need Modification Caused By Incorrect Dovetail Size..
Features
- New design in 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XD(M), XDS Pistol. (Does not fit 5.25 XDM competition series)
- It is design to for Springfield Non-OSP(Non Optics Ready) XD/XDS/XDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25 XDM competition series. This new plate is an re-designed version to replace the old E1/E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.
- Fit Ade RD3-006A(Huracan), RD3-006B(Cobra), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.
- There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.
- Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.05 Pounds
See On Amazon #7
Ade Advanced Optics SW MP Tactical Mini Dotx Sight Pistol Mount Base for Smith & Wesson M&P
Asin: B01L97399Q | Model: SW MP | PartNumber: SW MP | Ean: 0710500205613 | UPC: 710500205613
This Mounting Plate Does Not Fit Smith & Wesson M&P C.O.R.E Series (Already Optics Ready), M&P Shield Ez .380, M&P .22 Compact, Sw9ve, Sw40ve, Sigma.
Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot And Similar Red Dots..
This Mounting Plate Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots..
This Mounting Plate Fits Sw Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, Sd9ve,Sd40ve, M&P Shield.
Features
- This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith & Wesson handguns
- This mounting plate fits SW Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shield
- This mounting plate does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma
- This mounting plate fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots.
- Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.03 pounds
See On Amazon #8
Ade Advanced Optics Red Dot Sight Mount Base for Taurus G2C, G2S, G3 Without Factory Steel Sights, PT111 G2, PT140 G2, PT709, PT740 and The TX22 Pistols
Asin: B09BBPDNN6
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo X (Sorx1200 Only), Vortex Viper, Vortex Venom, Vortex Defender Ccw, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex Sight 2+, Docter/Noblex Sight Iii, Docter/Noblex Quicksight 5.0 Vr, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3.
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation. We Highly Recommend Diy Only If User Has Gunsmith Experiense, Or Hiring A Gunsmith To Install This Optic Plate. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Also Fits: Delta Optical Minidot, Delta Optical Minidot Ii, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, Makdot 1×25, Vector Optics Scrd-19Ii Frenzy 1X17x24, Creative Xp Glasseagle Hd, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Dragonfly, Hex Wasp, Crimson Trace Ct Rad Pro, Crimson Trace Cts-1550, Crimson Trace Cts-1250, Cyelee Calf V2, Cyelee Cat Pro, Or Vomz Pilad 1×20..
*** The Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo Zero, Romeo X (Sorx1200 Only), Vortex Defender Ccw, Holosun 507K, Holosun 407K, Sightmark Mini, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Wasp, Cyelee Cat Pro, Crimson Trace Cts-1550, And Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Pro, Rd3-030 Apollo Mount Using The Rear Set Of Mounting Holes And Do Not Use The Locating Pins At The Front Of The Plate. **.
Features
- This optic plate is made to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo). Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- *** The JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo Zero, Romeo X (SORX1200 only), Vortex Defender CCW, Holosun 507K, Holosun 407K, Sightmark Mini, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Wasp, Cyelee CAT PRO, Crimson Trace CTS-1550, and ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 PRO, RD3-030 Apollo mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. **
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo X (SORX1200 only), Vortex Viper, Vortex Venom, Vortex Defender CCW, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III, Docter/Noblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3
- Also Fits: Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1 25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1 25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Crimson Trace CTS-1550, Crimson Trace CTS-1250, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1 20.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.07 Pounds
See On Amazon #9
ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot
Asin: B01L973522 | Model: glock-1 | PartNumber: glock-1 | Ean: 0710500205583 | UPC: 710500205583
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium), Vortex Venom/Viper, Burris Fastfire, Meopta, Shield, Docter, Insight Red Dots..
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation. We Highly Recommend Diy Only If User Has Gunsmith Experiense, Or Hiring A Gunsmith To Install This Optic Plate. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
This Optic Mounting Plate Also Fits Other Red Dot Brands Such As Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not Fit Trijicon Rmr/Holosun/Shield Footprint Red Dots..
The Included Glock Plate Fit Some Other Pistols Such As Canik Tp9sf(Does Not Fit Sfx, Combat, Sa). This Glock Plate Also Fits Taurus Gx4, G3c & G3 With Factory Steel Sights (Does Not Fit Any Other Taurus Models Such As G2/G2c/G3 Without Factory Steel Sight/Tx22/Pt111) Because Those Pistols Made The Rear Sight Dovetail Based On The Glock Rear Sight Dovetail Specifications..
Features
- This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100 . Does NOT fit Glock with AFTERMARKET slide with optic cut.
- The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots.
- This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.10 pounds
See On Amazon #10
Ade Advanced Optics Mini Red Dot Sight Mount Base for Sig Sauer P320 M17 / M18 to Mount Burris FastFire 1/2/3/4, Doctor
Asin: B091BH7P8B
This Plate Does Not Fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec Version, Sig P320 Rx..
This Optic Plate Requires Removal The Rear Sight, Disassemble The Pistol Slide To Reach The 2 Screw Holes Underneath. Gunsmith Experience Is Required. We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot And Similar Red Dots..
It Also Fits Xcarry Only If It Has A Loaded Chamber Indicator. Some Xcarry Does Not Has A Loaded Chamber Indicator, Then This Plate Does Not Fit It. Inspect Your Xcarry Fully Before Purchasing..
Features
- This brand new designed optic mounting plate is designed to fit Sig Sauer P320 M17, M18, X-5 Legion and X-Compact Handgun THAT HAS A LOADED CHAMBER INDICATOR(and has two holes for plate's two teeth for the plate to insert to)
- It also fits XCarry ONLY IF it has a loaded chamber indicator. Some XCarry does not has a loaded chamber indicator, then this plate does NOT fit it. Inspect your XCarry fully before purchasing.
- This plate does NOT fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec version, Sig P320 RX.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.
- This optic plate requires removal the rear sight, disassemble the pistol slide to reach the 2 screw holes underneath. Gunsmith experience is required. we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #11
Ade Advanced Optics Red Dot Mounting Plate for Ruger Mark I, II, III, IV Mark 1,2,3,4 Pistol to FIT meopta, Insight, Eotech MRDS, Vortex Venom/Razor/Viper Red Dot Sights
Asin: B08669ZPLB
Also Fit Doctor, Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, , Insight Red Dots..
This Optic Plate Is Designed To Attach To The Two Existing Holes On The Top Of Ruger Mark Slide. No Need To Replace The Rear Sight And Allowing User To Co-Witness The Rear Sight..
Mounting Hardware Comes With Screws And Allen Wrench. Mounting Hardware Comes With Screws And Allen Wrench. We Are Learning That Depending On The Date Of Production Batches Of The Ruger Mark Series, Some Pre-Drilled Holes Are Slightly Shorter/Shallower. If So, Please Contact Us, We Will Send You Shorter Screws. We Are In The Process Of Adding Shorter Screws, But It Is Not Factory Included Til Next Production..
This Red Dot Sight Fit Ade Model Rd3-006, Rd3-009, Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium) Red Dot Sights..
Features
- This mounting plate is designed to connect red dot sights to Ruger Mark I, II, III, IV, IV-Lite, 22/45 pistol. For Mark I and II, confirm it has drilled/tapped holes. Plate will not work without holes.
- This red dot sight fit ADE model RD3-006, RD3-009, RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium) red dot sights.
- Also fit Doctor, Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech mrds, , Insight red dots.
- Mounting hardware comes with screws and allen wrench. Mounting hardware comes with screws and allen wrench. We are learning that depending on the date of production batches of the ruger mark series, some pre-drilled holes are slightly shorter/shallower. If so, please contact us, we will send you shorter screws. We are in the process of adding shorter screws, but it is not factory included til next production.
- This optic plate is designed to attach to the two existing holes on the top of Ruger Mark Slide. No need to replace the rear sight and allowing user to co-witness the rear sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #12
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount for ADE ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
Asin: B08L5JD9SS
For Using On Ade Rd3-006 Haracan, Rd3-009 Crusader, Rd3-012 Delta, Rd3-013 Bertrillium, Rd3-015 Zantitium Red Dot Sight.
Finished In A Matte Black Anodize. Comes With Two M3x6mm Screws.
Compatible With Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech Mrds, Sightmark Mini Shot Red Dot Sights.
It Is A Picatinny Mount, To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Precision CNC Machined from Aircraft Grade Aluminum
- It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
- Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights
- Finished in a Matte Black Anodize. Comes with two M3x6mm screws
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #13
Ade Advanced Optics Red Dot Adapter/Mount for Sig Sauer P320 M17 / M18 to Mount Vortex Venom/Viper red dot Sight.
Asin: B091BHB5XD
This Plate Does Not Fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec Version, Sig P320 Rx..
This Optic Plate Requires Removal The Rear Sight, Disassemble The Pistol Slide To Reach The 2 Screw Holes Underneath. Gunsmith Experience Is Required. We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Ishot And Similar Red Dots.Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Min.
It Also Fits Xcarry Only If It Has A Loaded Chamber Indicator. Some Xcarry Does Not Has A Loaded Chamber Indicator, Then This Plate Does Not Fit It. Inspect Your Xcarry Fully Before Purchasing..
Features
- This brand new designed optic mounting plate is designed to fit Sig Sauer P320 M17, M18, X-5 Legion and X-Compact Handgun THAT HAS A LOADED CHAMBER INDICATOR(and has two holes for plate's two teeth for the plate to insert to)
- It also fits XCarry ONLY IF it has a loaded chamber indicator. Some XCarry does not has a loaded chamber indicator, then this plate does NOT fit it. Inspect your XCarry fully before purchasing.
- This plate does NOT fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec version, Sig P320 RX.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. ishot and similar red dots.Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Min
- This optic plate requires removal the rear sight, disassemble the pistol slide to reach the 2 screw holes underneath. Gunsmith experience is required. we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.07 Pounds
See On Amazon #14
Ade Advanced Optics Red Dot Optic Adapter/Converter Mount Plate for Ruger American Pistol
Asin: B09HJLZZYF | Ean: 0640978407823 | UPC: 640978407823
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium), Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot/Coreshot, Crimson Trace Cts-1200/1300 And Similar Red Dots..
Installation Screws, Allen Wrench Are Included. While It Is Possible To Install This Mount Without The Use Of A Gunsmith, We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Does Not Fit Trijicon Rmr, Deltapoint Pro, Holosun, Shield Type Red Dot Footprint..
Only Fits Ruger American Pistol. This Plate Does Not Fit Any Other Ruger Pistols Such As Ruger Sr9, Security 9..
Features
- This Optic mount is designed to connect certain red dot optics to Ruger American Pistol and Ruger American Compact Pistol by replacing the factory rear sight.
- Only fits RUGER AMERICAN PISTOL. This plate does NOT fit any other ruger pistols such as Ruger SR9, SECURITY 9.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot/Coreshot, Crimson Trace CTS-1200/1300 and similar red dots.
- Does NOT fit Trijicon RMR, DeltaPoint Pro, holosun, Shield type red dot footprint.
- Installation screws, allen wrench are included. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #15
Ade Advanced Optics Absolute Cowitness Riser HIGH Mount - Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper Red Dot Sights
Asin: B088YJR6N4 | Ean: 0640978407755 | UPC: 640978407755
For Using On Ade Rd3-006 Haracan, Rd3-009 Crusader, Rd3-012 Delta, Rd3-013 Bertrillium, Rd3-015 Zantitium Red Dot Sight.
Finished In A Matte Black Anodize. Comes With Installation Screws And Allen Wrench..
Compatible With Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech Mrds, Sightmark Mini Shot Red Dot Sights.
This Is An Riser Optic Mount To Attach To The Red Dot Sights To Lift The Red Dot Higher To Absolute Cowitness Level..
Features
- Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts
- This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.
- For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
- Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights
- Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #16
Ade Advanced Optics Zantitium RD3-015 Red Dot Reflex Sight + Optic Mounting Plate for Sig Sauer P320 M17, M18 Pistol
Asin: B09D531K37
The Pistol Optic Plate Requires Removal The Rear Sight, Disassemble The Pistol Slide To Reach The 2 Screw Holes Underneath. Gunsmith Experience Is Required. We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Comes With Protective Cover, Screws, Wrenches, Instructions, Lens Cloth, Anti Flickering Shim..
New Advanced Battery Technology Gives Up To 3000 Hours On Bright Setting And Up To 40K Hours On Low Setting With A 2032 Battery(Included). Every Time You Turn On The Dot It Stays The Same Brightness Level Last Time It Was Turned Off.
4 Moa. Top Load System, No Need To Remove The Sight To Change The Battery. Red Dot Has Multi Brightness Level With One Adjustment Button. Every Time You Turn On The Dot It Stays The Same Brightness Level Last Time It Was Turned Off.
Shock Proof，Fog Proof And Waterproof For 30 Minutes Under 4Ft Water. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Full Metal Construction With Glass Lens. No Plastic Body, No Plastic Lens..
The Ade Zantitium Red Dot Sight Is The Biggest Handgun Sight On The Market! Actual Size Is. 2.25" Length X 1.4" Width X 1.27" Height. It Gives Up To Twice Bigger Window Than Other Micro Red Dot. Keep In Mind With The Bigger Than Others Size, Please Keep In Mind When Installed On Micro-Compact Handgun Will Look Bulky..
Please Fully Inspect Your P320 Model And Optic Cut Before Purchasing. The Pistol Optic Plate Does Not Fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec Version, Sig P320 Rx. Does Not Fit Standard X5 That Does Not Has A Loaded Chamber Indicator..
Features
- Comes with an ADE Zantitium RD3-015 RED dot sight, a picatinny plate, and a optic mounting plate designed to fit Sig Sauer P320 M17, M18, X-5 Legion and X-Compact Handgun THAT HAS A LOADED CHAMBER INDICATOR(and has two holes for plate's two teeth for the plate to insert to)
- Please fully inspect your p320 model and optic cut before purchasing. The Pistol optic plate does NOT fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec version, Sig P320 RX. Does NOT fit standard X5 that does NOT has a loaded chamber indicator.
- The pistol optic plate requires removal the rear sight, disassemble the pistol slide to reach the 2 screw holes underneath. Gunsmith experience is required. we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.
- 4 MOA. Top load system, no need to remove the sight to change the battery. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off
- Shock proof Fog proof and Waterproof for 30 minutes under 4ft water. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
- Comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim.
- New advanced battery technology gives up to 3000 hours on bright setting and up to 40k hours on Low setting with a 2032 Battery(Included). Every time you turn on the dot it stays the same brightness level last time it was turned off
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #17
Ade Advanced Optics Red Dot Mounting Plate/Base/Adapter for for Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight to FIT Sig Sauer Standard P365
Asin: B08B7FSWP3
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots..
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation..
Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot And Similar Red Dots..
Only Fits Sig Sauer Standard P365 Model. It Does Not Fit P365xl Which Is Already Optics Ready..
Features
- This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Sig Sauer Standard P365 Handgun.
- Only fits Sig Sauer standard P365 Model. It does NOT fit P365XL which is already Optics Ready.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots.
- Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #18
ADE Red Dot Sight Mount/Mounting Converter/Base Plate for Sig Sauer P365XL/P365X Handgun to Accept Over 25 Different red dots Such as Vortex Venom/Viper/Burris Fastfire/Sightmark Minishot
Asin: B09BBQY7KP | Ean: 0640978407830 | UPC: 640978407830
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots..
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation. We Highly Recommend Diy Only If User Has Gunsmith Experiense, Or Hiring A Gunsmith To Install This Optic Plate. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot And Similar Red Dots. It Does Not Fit The Sights With Shield Rmsc And Trijicron Rmr Footprint..
This Plate Does Not Fit Base/Standard Sig P365 Which Does Not Has A Optic Cut. This Plate Does Not Fit Red Dot Footprint Such As Trijicon Rmr, Shield Rms, Holosun, Deltapoint Pro. Fits P365xl And P365x Only! Works With P365x Models That Have The Integrated Rear Sight On The Optics Cover Plate. Does Not Work With 365 Base Model, P365x Macro, P365x Spectre Or P365xl Spectre Comp.
Features
- The existing optic cut on Sig P365XL and P365X only fits Shield RMS and ADE RD3-018 SPIKE footprint red dot, the existing optic cut does not allow red dots with any other footprints to fit. This Optic Plate created by ADE allows Sig P365xl and P365x to accept over 25 different red dot optic brands on the market. Simply sit this plate on the exiting optic cut on P365XL/P365X.
- This Plate does NOT fit base/standard Sig P365 which does not has a optic cut. This plate does NOT fit red dot footprint such as trijicon rmr, shield rms, holosun, Deltapoint Pro. Fits P365XL and P365X Only! Works with P365X models that have the integrated rear sight on the optics cover plate. DOES NOT WORK WITH 365 BASE MODEL, P365X Macro, P365X Spectre or P365XL Spectre Comp
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots.
- Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots. It does NOT fit the sights with Shield RMSC and trijicron rmr footprint.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #19
ADE Zantitium (RD3-015 PRO) PRO Series Motion Awake (Sensor Activated) Red Dot Sight with Multi Reticle System for Optics Ready Pistol Slide/Cut That is Compatible with Doctor Footprint
Asin: B0BWGFJ9DV
The Size Of The Red Dot Is About 30% Longer Than Other Red Dots, The Window Is Also Bigger. Therefore, It Will Not Fit Some Optics Ready Handgun Model That Has A Optic Cut In Front Of The Rear Sight(Will Keep The Rear Sight To Co-Witness The Red Dot), Such As Glock Mos, Springfield Osp. The Longer Length Of This Red Dot Does Not Sit In The Pre-Cut. It Only Fits The Mounting Plate That Is Made To Replace The Rear Sight And Set On The Top Of The Slide(Not In The Pre-Cut)..
2.25" Length X 1.4" Width X 1.27" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light..
The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr2032 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate To Replace The Rear Sight (Does Not Fit Optics Ready Pistol With Cut) That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint. Does Not Fit Rmr, Shield Rms Type Footprints Plate..
The Ade Zantitium Pro(D3-015Pro) Has Motion Activated System. While Zantitium Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting. User Also Has A Option To Manually Turn The Red Dot Power Off To Disable The Motion Activated System..
The Ade Zantitium Red Dot Sight Is The Biggest Handgun Sight On The Market! Actual Size Is. 2.25" Length X 1.4" Width X 1.27" Height. It Gives Up To Twice Bigger Window Than Other Micro Red Dot. Keep In Mind With The Bigger Than Others Size, Please Keep In Mind When Installed On Micro-Compact Handgun Will Look Bulky..
Features
- ADE is releasing the 2023 PRO SERIES for ADE RD3-015(2016-present) Zantitium red dot called Zantitium PRO(D3-015PRO). The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.
- The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.
- The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sight(will keep the rear sight to co-witness the red dot), such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slide(not in the pre-cut).
- The ADE Zantitium PRO(D3-015PRO) has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.
- The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR2032 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight (DOES NOT FIT OPTICS READY PISTOL WITH CUT) that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate.
- 2.25 Length x 1.4 Width x 1.27 Height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Warranty: 1 year warranty
See On Amazon #20
Ade Advanced Optics ZANTITIUM PRO RD3-015 PRO Motion Awake, Multi Reticle Red Dot + Optic Mounting Plate for SW MP 9 Shield EZ and Shield EZ 30 Super Carry Pistol + Standard Picatinny Mount
Asin: B0CDFJC58R | Model: RD3-015 PRO | PartNumber: RD3-015 PRO
The Ade Zantitium Pro Has Multi Reticle System. The Reticle Can Be Switched Between A 32 Moa Circle With 2 Moa Dot, A 2 Moa Dot Only, Or A 32 Moa Ring Only At The Push Of A Button. Better Yet, The Same Led Projects Both Reticles, So No Re-Zeroing Is Necessary. Operates With A Single Cr1632 Battery. Press And Hold The Down Switch For 3 Seconds To Manually Turn On/Off The Power. Press And Hold The Up Switch For 3 Seconds To Change Reticle. Quick Press Up/Down Switches To Adjust Brightness..
Top Load System, No Need To Remove The Sight To Change The Battery. Comes With Red Dot, Tool, Removeable Picatinny Plate With Two Screws, Cover, Lens Cloth And Instruction Manual. Fits Pistol Optic Plate To Replace The Rear Sight (Does Not Fit Optics Ready Pistol With Cut) That Is Compatible With Doctor/Vortex Venom/Burris Fastfire Footprint..
The Size Of The Red Dot Is About 30% Longer Than Other Red Dots, The Window Is Also Bigger. Therefore, It Will Not Fit Some Optics Ready Handgun Model That Has A Optic Cut In Front Of The Rear Sight(Will Keep The Rear Sight To Co-Witness The Red Dot), Such As Glock Mos, Springfield Osp. The Longer Length Of This Red Dot Does Not Sit In The Pre-Cut. It Only Fits The Mounting Plate That Is Made To Replace The Rear Sight And Set On The Top Of The Slide(Not In The Pre-Cut)..
Waterproof/Shock/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
The Ade Zantitium Red Dot Sight Is The Biggest Handgun Sight On The Market! Actual Size Is. 2.25" Length X 1.4" Width X 1.27" Height. It Gives Up To Twice Bigger Window Than Other Micro Red Dot. Keep In Mind With The Bigger Than Others Size, Please Keep In Mind When Installed On Micro-Compact Handgun Will Look Bulky..
The Ade Zantitium Pro(D3-015Pro) Has Motion Activated System. While Zantitium Pro Is Turned On, The Red Dot Illumination Goes To Sleep After Five Minutes Of Inactivity, But When Any Motion Or Vibration Is Detected, It Instantly Switches On Illumination At The Previous Brightness Setting. User Also Has A Option To Manually Turn The Red Dot Power Off To Disable The Motion Activated System..
Features
- This Listing comes with the optic sight, a Picatinny Mounting Plate and a Pistol plate for Smith Wesson SW MP 9 Shield EZ and Shield EZ 30 Super Carry pistol by replacing factory rear sight. This pistol plate does NOT fit any other pistol models such as 380 EZ. ADE offers plates for several other models. Please search or contact us with any fitment question. Installing the aftermarket optic plate is not simply plug and play . We recommend having a qualified gunsmith to install.
- The ADE Zantitium PRO(D3-015PRO) has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.
- The ADE Zantitium PRO has Multi Reticle System. The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn on/off the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press Up/Down switches to adjust brightness.
- The ADE Zantitium Red dot sight is the biggest handgun sight on the market! Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.
- The size of the red dot is about 30% longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sight(will keep the rear sight to co-witness the red dot), such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slide(not in the pre-cut).
- Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight (DOES NOT FIT OPTICS READY PISTOL WITH CUT) that is compatible with Doctor/Vortex Venom/Burris Fastfire footprint.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Warranty: If you encounter any problems during use, you can contact us at any time, we will serve you wholeheartedly
See On Amazon
Looking For Something Else?
Search