Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol
Asin: B087H5XLQ8
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Crusader Rd3-009 Red Dot. Shockproof, Fogproof And Waterproof For 30 Minutes Under 4Ft Water. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief.
While It Is Possible To Install This Mount Without The Use Of A Gunsmith, We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Features
- Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.3"/3.8" Single Stack, XD(M), Hellcat (Non-OSP) Pistol. (It does NOT fit 5.25 XDM competition series, it does NOT fit any OSP optics ready models)
- While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- Crusader RD3-009 Red Dot. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief
- 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon Similar To Ade Advanced Optics Crusader RD3009
#1
Ade Advanced Optics RD3-006B Green Dot Sight for Handgun - Not Red
Asin: B074ZTGXKJ | Model: RD3-006B | PartNumber: RD3-006B | Ean: 0640978398459 | UPC: 640978398459
Since Its Initial Release In 2014, We've Implemented Numerous Improvements To Enhance Its Durability, Ensuring It Can Withstand Recoil While Also Improving Its Ability To Hold Zero. The Front Switch, Battery Housing, And Hardware Have All Been Recently Updated, Reflecting Our Commitment To Continuous Enhancement. This Product Is Proudly Designed In Oregon..
Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Nuwa Pro And Rd3-030 Apollo Fit Optic Cut/Optic Plate That Is Compatible With Shield Rms/Rmsc/Deltapoint Pro Footprint.
Ade Rd3-021C Nuwacc Fits Optic Cut/Optic Plate That Is Compatible With Trijicon Rmrcc Footprint.
If You're Not Seeing A Perfect Round Dot But Instead Observe A Splashed Dot, Half-Moon Shape, Multi-Dot, Or Starburst, There's A High Probability (99%) That You Might Have Astigmatism Without Being Aware Of It. What You Perceive Is Likely A Small Reflection Of The Led Light On The Lens. A Quick And Simple Way To Confirm This Is By Using Your Cellphone To Take A Photo Of The Dot. If The Photo Shows A Circular Dot, You've Essentially Diagnosed Yourself With Astigmatism..
Ade Rd3-006 Huracan,Rd3-009 Crusader,Rd3-012 Delta, Rd3-012 Pro, Rd3-013 Bertrillium ,Rd3-015 Zantitium, Rd3-028 Ares Fit Optic Cut/Plate That Is Compatible With Vortex Venom/Burris Fastfire/Doctor Footprint.
Although It's Feasible To Install The Optic On A Handgun Without The Assistance Of A Gunsmith, We Highly Recommend Seeking The Expertise Of A Professional For The Installation Process. It's Essential To Note That Unprofessional Installations, Such As Improper Torque Application, Can Lead To Issues Like Loose Screws, An Inability To Hold Zero, Damage To The Firearm Or Optic, And Even Pose A Risk Of Personal Injury..
Ade Rd3-019 Stingray, Rd3-020 Raptor, Rd3-022 Artemis, Rd3-023 Valkyrie And Rd3-029 Trumpet Fit Optic Cut/Optic Plate/ That Is Compatible With Trijicon Rmr/Sro/Holosun 407C/507C Footprint.
The On/Off Switch For This Sight Is Conveniently Positioned At The Front, Making It Much Easier To Press Compared To Red Dots With Side-Mounted Switches. It Features A 3 Moa Dot Size And Offers 5 Illumination Settings. The Sight Is Fully Adjustable For Windage And Elevation And Can Be Locked Into Place. With Unlimited Eye Relief And Various Illumination Settings, It Is Powered By An Included Lithium Cr2032 Battery..
Features
- This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint Plate/Slide seamlessly.
- The on/off switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.
- Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.
- Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.
- If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability (99%) that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.
- ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint
- ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint
- ADE RD3-021c NUWAcc fits optic cut/optic plate that is compatible with Trijicon RMRcc footprint
- ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Dimensions: 2.50 x 4.80 x 2.00 inches | Weight: 0.40 Pounds
Warranty: 1 year
See On Amazon #2
Ade Advanced Optics Compact RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for SW Smith Wesson MP/MP 2.0 Shield SD9VE,SD40VE Pistol and Also a Standard Picatinny Mount
Asin: B07T86FZG8
The Pistol Mount Included For Sw Does Not Fit Any Ez, 380, Ez 380 Models, Such As M&P Shield Ez, M&P 380 Shield Ez. Any Shield Or Mp Model That Is Ez Or 380 This Optic Plate Will Not Fit..
Waterproof/Shock/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. 5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
This Ade Rd3-009 Crusader Have Made Several Improvements Since It's Initial Release In 2016. We Have Made It More Durable To Withstand Various Recoil And Improved The Ability To Hold Zero. Designed In Oregon..
The Pistol Mount Included For Sw Does Not Fit Smith & Wesson M&P C.O.R.E Series (Already Optics Ready), M&P Shield Ez .380, M&P .22 Compact, Sw9ve, Sw40ve, Sigma, 1911.
Features
- Comes with an removable standard picatinny mount and handgun mount(replace rear sight) fits CERTAIN SW models such as Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, M&P Shield, SD9VE, SD40VE.
- The pistol mount included for SW does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma, 1911
- The pistol mount included for SW does NOT fit any EZ, 380, EZ 380 models, such as M&P SHIELD EZ, M&P 380 SHIELD EZ. Any Shield or MP model that is EZ or 380 this Optic Plate WILL NOT FIT.
- This ADE RD3-009 Crusader have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon.
- Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.57 Pounds
See On Amazon #3
ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire
Asin: B01L9734Y6 | Model: glock | PartNumber: glock | Ean: 0710500205576 | UPC: 710500205576
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium), Vortex Venom/Viper, Burris Fastfire, Meopta, Shield, Docter, Insight Red Dots..
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation. We Highly Recommend Diy Only If User Has Gunsmith Experiense, Or Hiring A Gunsmith To Install This Optic Plate. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
This Optic Mounting Plate Also Fits Other Red Dot Brands Such As Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not Fit Trijicon Rmr/Holosun/Shield Footprint Red Dots..
The Included Glock Plate Fit Some Other Pistols Such As Canik Tp9sf(Does Not Fit Sfx, Combat, Sa). This Glock Plate Also Fits Taurus Gx4, G3c & G3 With Factory Steel Sights (Does Not Fit Any Other Taurus Models Such As G2/G2c/G3 Without Factory Steel Sight/Tx22/Pt111) Because Those Pistols Made The Rear Sight Dovetail Based On The Glock Rear Sight Dovetail Specifications..
Features
- This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100 . Does NOT fit Glock with AFTERMARKET slide with optic cut.
- The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots.
- This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.01 Pounds
See On Amazon #4
Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
Asin: B09CN4QYK1
5 Moa. Operates With A Single Cr2032 Battery(Installed Underneath). Multiple Brightness Setting. 1000 Hours Battery Life On The Brightest Setting. Auto Turns Off After 4 Hours. Approximately 1.01"H X 1.9"L X 1.1W.
Shock Proof，Fog Proof And Waterproof For 30 Minutes Under 4Ft Water. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Full Metal Construction With Glass Lens. No Plastic Body, No Plastic Lens..
This Plate Does Not Fit G3 With Newer Factory Steel Sight, G3c, Please Search "Ade G3c/Glock Plate" On Amazon. Does Not Fit Taurus New Tx22c( Tx22 Compact) Which Is Optics Ready, Please See Ade Rd3-018 Spike And Rd3-021 Nuwa(And Nuwa Pro) And Rd3-030 Apollo Fit Directly Without Any Plate/Adaptor..
Features
- Installing the aftermarket optic plate is not simply plug and play . We recommend having a qualified gunsmith to install. Comes with a ADE RD3-009 red dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)
- This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C/GLOCK PLATE on amazon. Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- 5 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01H x 1.9L x 1.1W
- Shock proof Fog proof and Waterproof for 30 minutes under 4ft water. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.60 pounds
See On Amazon #5
Ade Advanced Optics RD3-009-2 Red Dot Sights
Asin: B00OJHL5RC | Model: RD3-009-2 | PartNumber: RD3-009-2 | Ean: 0710500199165 | UPC: 710500199165
This Red Dot Comes With A Picatinny Mounting Base. It Is Also Compatible With Varies Handgun Mounting Plates That Replace Rear Sight Dovetail. It Is Also Compatible To Optics Ready Pistols Such As Glock Mos, Springfield Osp,.
Ade Model Rd3-006,Rd3-009,Rd3-012,Rd3-013,Rd3-015 Are Designed To Fit The Slide/Footprint Of Plate Made For Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech Mrds. Any Plate Made For Those Brands Also Fits This Sight..
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. 5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Waterproof/Shock/Fog Resistant. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Features
- We have made several improvements since it's initial release in 2014. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.
- Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.45 Pounds
Warranty: 1 year
See On Amazon #6
ADE Crusader RD3-009 Red Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS) Standard Models and Taurus G3C
Asin: B07TDGJT9Y
This Is Ade's Entry Level Red Dot Origianlly Released In 2014. Over The Years Of Improvement, It Is One Of Best Budget Red Dot For The Quality At This Price Range. We Have Made It More Durable To Withstand Recoil And Improved The Ability To Hold Zero. Designed In Oregon. Starting Jan 2024, This Red Dot Is Shipped With Motion Awake Technology..
5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Dimension: 1.9" Length X1.1" Width X1.0" Height. Ip67 Waterproof. The Lens Is Coated With Multi-Coating To Eliminate Glare And Provide A High Level Of Performance In Low Light. Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
Motion Awake Technology. 6 Moa. Powered By A Lithium Cr2032 Battery. Comes With Lens Cloth, Instruction Manual, Recoil Reduction Rubber Shim, Piatinny Plate, Screws For Conneting Picactinny Plate, Allen Wrench, Tool, Battery Opener Coin, Battery..
Does Not Fit Glock With Aftermarket Slide With Optic Cut. We Have Made Several Improvements Since It's Initial Release In 2016. We Have Made It More Durable To Withstand Various Recoil And Improved The Ability To Hold Zero. Designed In Oregon..
Features
- This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100 . Does NOT fit Glock with AFTERMARKET slide with optic cut.
- Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon.
- This is ADE's entry level red dot origianlly released in 2014. Over the years of improvement, it is one of best budget red dot for the quality at this price range. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon. Starting Jan 2024, this red dot is shipped with Motion Awake Technology.
- Motion Awake Technology. 6 MOA. Powered by a lithium CR2032 battery. Comes with Lens cloth, Instruction Manual, Recoil Reduction Rubber Shim, Piatinny Plate, Screws for conneting Picactinny Plate, Allen Wrench, tool, Battery Opener Coin, Battery.
- 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- Dimension: 1.9 length x1.1 width x1.0 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.57 Pounds
See On Amazon #7
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Vortex Venom/Viper Red Dot Sights
Asin: B08L5K1MWC
For Using On Ade Rd3-006 Haracan, Rd3-009 Crusader, Rd3-012 Delta, Rd3-013 Bertrillium, Rd3-015 Zantitium Red Dot Sight.
Finished In A Matte Black Anodize. Comes With Two M3x6mm Screws.
Compatible With Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech Mrds, Sightmark Mini Shot Red Dot Sights.
It Is A Picatinny Mount, To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Precision CNC Machined from Aircraft Grade Aluminum
- It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
- Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights
- Finished in a Matte Black Anodize. Comes with two M3x6mm screws
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #8
Ade Advanced Optics Picatinny Mounting Plate/Adapter/Mount - Compatible with Doctor, Burris Fastfire 1 2 3 4, Vortex Venom Red Dot Sights
Asin: B08L5KWBQ4
For Using On Ade Rd3-006 Haracan, Rd3-009 Crusader, Rd3-012 Delta, Rd3-013 Bertrillium, Rd3-015 Zantitium Red Dot Sight.
Finished In A Matte Black Anodize. Comes With Two M3x6mm Screws.
Compatible With Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech Mrds, Sightmark Mini Shot Red Dot Sights.
It Is A Picatinny Mount, To Connect To Certain Type Of Optic Sight To Standard 1913 Picatinny/Weaver Rail. It Does Not Connect To Handgun Because Most Handguns Does Not Has A Picatinny Rail On Top.
Features
- Precision CNC Machined from Aircraft Grade Aluminum
- It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinny/weaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top
- For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight
- Compatible with Doctor, Burris Fastfire, Vortex Venom/Viper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights
- Finished in a Matte Black Anodize. Comes with two M3x6mm screws
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #9
Ade Advanced Optics Red Dot Sight Mount Base for Taurus G2C, G2S, G3 Without Factory Steel Sights, PT111 G2, PT140 G2, PT709, PT740 and The TX22 Pistols
Asin: B09BBPDNN6
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo X (Sorx1200 Only), Vortex Viper, Vortex Venom, Vortex Defender Ccw, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex Sight 2+, Docter/Noblex Sight Iii, Docter/Noblex Quicksight 5.0 Vr, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3.
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation. We Highly Recommend Diy Only If User Has Gunsmith Experiense, Or Hiring A Gunsmith To Install This Optic Plate. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Also Fits: Delta Optical Minidot, Delta Optical Minidot Ii, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, Makdot 1×25, Vector Optics Scrd-19Ii Frenzy 1X17x24, Creative Xp Glasseagle Hd, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Dragonfly, Hex Wasp, Crimson Trace Ct Rad Pro, Crimson Trace Cts-1550, Crimson Trace Cts-1250, Cyelee Calf V2, Cyelee Cat Pro, Or Vomz Pilad 1×20..
*** The Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo Zero, Romeo X (Sorx1200 Only), Vortex Defender Ccw, Holosun 507K, Holosun 407K, Sightmark Mini, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Wasp, Cyelee Cat Pro, Crimson Trace Cts-1550, And Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Pro, Rd3-030 Apollo Mount Using The Rear Set Of Mounting Holes And Do Not Use The Locating Pins At The Front Of The Plate. **.
Features
- This optic plate is made to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo). Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- *** The JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo Zero, Romeo X (SORX1200 only), Vortex Defender CCW, Holosun 507K, Holosun 407K, Sightmark Mini, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Wasp, Cyelee CAT PRO, Crimson Trace CTS-1550, and ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 PRO, RD3-030 Apollo mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. **
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo X (SORX1200 only), Vortex Viper, Vortex Venom, Vortex Defender CCW, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III, Docter/Noblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3
- Also Fits: Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1 25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1 25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Crimson Trace CTS-1550, Crimson Trace CTS-1250, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1 20.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.07 Pounds
See On Amazon #10
Ade Advanced Optics Red Dot Adapter/Mount for Sig Sauer P320 M17 / M18 to Mount Vortex Venom/Viper red dot Sight.
Asin: B091BHB5XD
This Plate Does Not Fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec Version, Sig P320 Rx..
This Optic Plate Requires Removal The Rear Sight, Disassemble The Pistol Slide To Reach The 2 Screw Holes Underneath. Gunsmith Experience Is Required. We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Ishot And Similar Red Dots.Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Min.
It Also Fits Xcarry Only If It Has A Loaded Chamber Indicator. Some Xcarry Does Not Has A Loaded Chamber Indicator, Then This Plate Does Not Fit It. Inspect Your Xcarry Fully Before Purchasing..
Features
- This brand new designed optic mounting plate is designed to fit Sig Sauer P320 M17, M18, X-5 Legion and X-Compact Handgun THAT HAS A LOADED CHAMBER INDICATOR(and has two holes for plate's two teeth for the plate to insert to)
- It also fits XCarry ONLY IF it has a loaded chamber indicator. Some XCarry does not has a loaded chamber indicator, then this plate does NOT fit it. Inspect your XCarry fully before purchasing.
- This plate does NOT fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec version, Sig P320 RX.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. ishot and similar red dots.Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Min
- This optic plate requires removal the rear sight, disassemble the pistol slide to reach the 2 screw holes underneath. Gunsmith experience is required. we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.07 pounds
See On Amazon #11
Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD, XDE, XD MOD.2, XD(M), XDM, XDS Pistol
Asin: B087H5GHCR
Fit Ade Rd3-006A(Huracan), Rd3-006B(Cobra), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot..
Hiring A Gunsmith Is Highly Recommended, Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury. Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Instsallation. Including Two Align Pins To Attach To Any Of The Four Corner Holes To Prevent Any Movement..
There Are Two Parts Of This Plate. This Small Dovetail Insert Plate Basically Replaces The Rear Sight Using Two Jam Screws. The Big Plate Uses Two Silver Alignment Pins At 2 Of The 4 Corner Holes For The Optic To Sit In..
It Is Design To For Springfield Non-Osp(Non Optics Ready) Xd/Xds/Xdm Pistols That Do Not Has A Optic Cut. This Plate Is For Replacing Rear Sight. It Also Fits Non-Osp Hellcat. It Does Not Fit 5.25″ Xdm Competition Series. This New Plate Is An Re-Designed Version To Replace The Old E1/E2 Plate For Springfield Xd That Always Need Modification Caused By Incorrect Dovetail Size..
Features
- New design in 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XD(M), XDS Pistol. (Does not fit 5.25 XDM competition series)
- It is design to for Springfield Non-OSP(Non Optics Ready) XD/XDS/XDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25 XDM competition series. This new plate is an re-designed version to replace the old E1/E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.
- Fit Ade RD3-006A(Huracan), RD3-006B(Cobra), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.
- There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.
- Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.05 pounds
See On Amazon #12
Optic Mount Plate for Taurus PT111 G2, Millennium G2, G2, G3 and TX22 to fit on Holosun 507K,407K, Riton MPR D2, Riton MPR D2, Riton 3 Tactix MPRD,Vortex Venom,Burris Fastfire,Meopta, Docter Red Dot
Asin: B09BBQVHMC
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo X (Sorx1200 Only), Vortex Viper, Vortex Venom, Vortex Defender Ccw, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex Sight 2+, Docter/Noblex Sight Iii, Docter/Noblex Quicksight 5.0 Vr, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3.
Also Fits: Delta Optical Minidot, Delta Optical Minidot Ii, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, Makdot 1×25, Vector Optics Scrd-19Ii Frenzy 1X17x24, Creative Xp Glasseagle Hd, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Dragonfly, Hex Wasp, Crimson Trace Ct Rad Pro, Crimson Trace Cts-1550, Crimson Trace Cts-1250, Cyelee Calf V2, Cyelee Cat Pro, Or Vomz Pilad 1×20..
*** The Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo Zero, Romeo X (Sorx1200 Only), Vortex Defender Ccw, Holosun 507K, Holosun 407K, Sightmark Mini, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Wasp, Cyelee Cat Pro, Crimson Trace Cts-1550, And Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Pro, Rd3-030 Apollo Mount Using The Rear Set Of Mounting Holes And Do Not Use The Locating Pins At The Front Of The Plate. **.
Features
- This optic plate is made to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo). Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- *** The JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo Zero, Romeo X (SORX1200 only), Vortex Defender CCW, Holosun 507K, Holosun 407K, Sightmark Mini, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Wasp, Cyelee CAT PRO, Crimson Trace CTS-1550, and ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 PRO, RD3-030 Apollo mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. **
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo X (SORX1200 only), Vortex Viper, Vortex Venom, Vortex Defender CCW, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III, Docter/Noblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3
- Also Fits: Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1 25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1 25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Crimson Trace CTS-1550, Crimson Trace CTS-1250, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1 20.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.00 Pounds
See On Amazon #13
Ade Advanced Optics Mini Red Dot Sight Mount Base for Sig Sauer P320 M17 / M18 to Mount Burris FastFire 1/2/3/4, Doctor
Asin: B091BH7P8B
This Plate Does Not Fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec Version, Sig P320 Rx..
This Optic Plate Requires Removal The Rear Sight, Disassemble The Pistol Slide To Reach The 2 Screw Holes Underneath. Gunsmith Experience Is Required. We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot And Similar Red Dots..
It Also Fits Xcarry Only If It Has A Loaded Chamber Indicator. Some Xcarry Does Not Has A Loaded Chamber Indicator, Then This Plate Does Not Fit It. Inspect Your Xcarry Fully Before Purchasing..
Features
- This brand new designed optic mounting plate is designed to fit Sig Sauer P320 M17, M18, X-5 Legion and X-Compact Handgun THAT HAS A LOADED CHAMBER INDICATOR(and has two holes for plate's two teeth for the plate to insert to)
- It also fits XCarry ONLY IF it has a loaded chamber indicator. Some XCarry does not has a loaded chamber indicator, then this plate does NOT fit it. Inspect your XCarry fully before purchasing.
- This plate does NOT fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec version, Sig P320 RX.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.
- This optic plate requires removal the rear sight, disassemble the pistol slide to reach the 2 screw holes underneath. Gunsmith experience is required. we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #14
Ade Advanced Optics SW MP Tactical Mini Dotx Sight Pistol Mount Base for Smith & Wesson M&P
Asin: B01L97399Q | Model: SW MP | PartNumber: SW MP | Ean: 0710500205613 | UPC: 710500205613
This Mounting Plate Does Not Fit Smith & Wesson M&P C.O.R.E Series (Already Optics Ready), M&P Shield Ez .380, M&P .22 Compact, Sw9ve, Sw40ve, Sigma.
Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot And Similar Red Dots..
This Mounting Plate Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots..
This Mounting Plate Fits Sw Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, Sd9ve,Sd40ve, M&P Shield.
Features
- This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith & Wesson handguns
- This mounting plate fits SW Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, SD9VE,SD40VE, M&P Shield
- This mounting plate does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma
- This mounting plate fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots.
- Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
Weight: 0.03 pounds
See On Amazon #15
Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Ruger Mark I,II,III,IV,IV-Lite,Mark 1,2,3,4 + Picatinny Plate
Asin: B086FGJG6W
Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. 5 Moa. 5 Illumination Settings. Powered By A Lithium Cr2032 Battery(Included).
Lenses Are Precision Ground And Polished To Exacting Geometries To Virtually Eliminate Parallax And To Provide A Very Clear, Crisp Sight Picture..
The Red Dot Is Designed To Fit The Slide/Footprint On The Cut Made For Vortex Venom, Burris Fastfire, Meopta, Docter, Insight..
Comes With One Picatinny Mounting Plate And One Ruger Plate. No Need To Replace The Rear Sight And Allowing User To Co-Witness The Rear Sight. Scroll Down To Product Description To See The Fitment List For Ruger Mark Series..
Features
- This mounting plate is designed to connect red dot sights to Ruger Mark I, II, III, IV, IV-Lite, 22/45 pistol by attaching to the two holes on top of the slide.For Mark I and II, confirm it has drilled/tapped holes. Plate will not work without holes.
- Comes with one picatinny mounting plate and one ruger plate. No need to replace the rear sight and allowing user to co-witness the rear sight. Scroll down to Product Description to see the fitment list for Ruger Mark Series.
- Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
- The red dot is designed to fit the slide/footprint on the cut made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight.
- Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #16
Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Ruger Security 9 Pistol + Standard Picatinny Mounting Plate
Asin: B0CFT4HFXM | Model: RD3-009+Security 9 Plate | PartNumber: RD3-009+Security 9 Plate
Designed To Fit Optic Cut/Plate That Is Compatible With Vortex Venom/Burris Fastfire/Doctor Footprint. Please Note: Some Aftermarket Slides Have A Precise Optic Cut Based On The Curved Edge/Corner Of Vortex Venom, One Of The Common Slide Manufacturers Is Psa Dagger(With Doctor Cut). Ade And Other Brand Red Dots Do Not Have The Same Curve As Vortex Venom, Therefore This Ade Rd3-009 Red Dot Does Not Fit The Aftermarket Slide With Curved Vortex Venom Optic Cut..
Comes With Instruction Manual, Lens Cloth, Wrench Tool, Screws, Lens Cover, Piactinny Plate And Pistol Plate For Ruger Security 9..
Upon Receiving Your Ade Red Dot, You'll Find A Pre-Assembled Picatinny Mounting Plate, Either Already Affixed Or Packaged Separately. Use The Provided Allen Wrench To Remove The Two M3.5X6mm Screws Located Behind The Glass Frame. This Detaches The Red Dot From The Picatinny Plate, Enabling Attachment To Various Handgun Mounting Plates For Customization..
Motion Awake Technology. 6 Moa. Powered By A Lithium Cr2032 Battery. Comes With Lens Cloth, Instruction Manual, Recoil Reduction Rubber Shim, Piatinny Plate, Screws For Conneting Picactinny Plate, Allen Wrench, Tool, Battery Opener Coin, Battery..
This Is Ade's Entry Level Red Dot Origianlly Released In 2014. Over The Years Of Improvement, It Is One Of Best Budget Red Dot For The Quality At This Price Range. We Have Made It More Durable To Withstand Recoil And Improved The Ability To Hold Zero. Designed In Oregon. Starting Jan 2024, This Red Dot Is Shipped With Motion Awake Technology..
Features
- This Listing comes with the optic sight, a Picatinny Mounting Plate and a Pistol plate for Ruger Security 9 full size and Ruger Security 9 compact size pistols by replacing factory rear sight. This pistol plate does NOT fit any other pistol models such as Ruger SR9, SR40, SR Series and any other pistols. Installing the aftermarket optic plate is not simply plug and play . We recommend having a qualified gunsmith to install.
- This is ADE's entry level red dot origianlly released in 2014. Over the years of improvement, it is one of best budget red dot for the quality at this price range. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon. Starting Jan 2024, this red dot is shipped with Motion Awake Technology.
- Designed to fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint. Please note: Some aftermarket slides have a precise optic cut based on the curved edge/corner of Vortex Venom, one of the common slide manufacturers is PSA Dagger(with Doctor cut). ADE and other brand red dots do NOT have the same curve as Vortex Venom, therefore this ADE RD3-009 red dot does NOT fit the aftermarket slide with CURVED vortex venom optic cut.
- Motion Awake Technology. 6 MOA. Powered by a lithium CR2032 battery. Comes with Lens cloth, Instruction Manual, Recoil Reduction Rubber Shim, Piatinny Plate, Screws for conneting Picactinny Plate, Allen Wrench, tool, Battery Opener Coin, Battery.
- Comes with instruction manual, lens cloth, wrench tool, screws, lens cover, piactinny plate and pistol plate for Ruger Security 9.
- Upon receiving your ADE red dot, you'll find a pre-assembled Picatinny mounting plate, either already affixed or packaged separately. Use the provided Allen wrench to remove the two M3.5X6mm screws located behind the glass frame. This detaches the red dot from the Picatinny plate, enabling attachment to various handgun mounting plates for customization.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #17
Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Sig Sauer P320 M17 / M18 Pistol
Asin: B09D51GZ18
The Pistol Optic Plate Requires Removal The Rear Sight, Disassemble The Pistol Slide To Reach The 2 Screw Holes Underneath. Gunsmith Experience Is Required. We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
Shock Proof，Fog Proof And Waterproof For 30 Minutes Under 4Ft Water. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Full Metal Construction With Glass Lens. No Plastic Body, No Plastic Lens..
Comes With Protective Cover, Screws, Wrenches, Instructions, Lens Cloth, Anti Flickering Shim..
6 Moa. Operates With A Single Cr2032 Battery(Installed Underneath). Multiple Brightness Setting. 1000 Hours Battery Life On The Brightest Setting. Auto Turns Off After 4 Hours. Approximately 1.01"H X 1.9"L X 1.1W.
Please Fully Inspect Your P320 Model And Optic Cut Before Purchasing. The Pistol Optic Plate Does Not Fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec Version, Sig P320 Rx. Does Not Fit Standard X5 That Does Not Has A Loaded Chamber Indicator..
Features
- Comes with an ADE Crusader RD3-009 RED dot sight, a picatinny plate, and a optic mounting plate designed to fit Sig Sauer P320 M17, M18, X-5 Legion and X-Compact Handgun THAT HAS A LOADED CHAMBER INDICATOR(and has two holes for plate's two teeth for the plate to insert to)
- Please fully inspect your p320 model and optic cut before purchasing. The Pistol optic plate does NOT fit Standard Sig P320, Sig P320 Military Surplus/Mil Spec version, Sig P320 RX. Does NOT fit standard X5 that does NOT has a loaded chamber indicator.
- The pistol optic plate requires removal the rear sight, disassemble the pistol slide to reach the 2 screw holes underneath. Gunsmith experience is required. we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- 6 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01H x 1.9L x 1.1W
- Shock proof Fog proof and Waterproof for 30 minutes under 4ft water. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
- Comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #18
Ade Advanced Optics Crusader RD3-009 Red Dot Sight + Optic Mounting Plate for 1911 Novak Rear Sight Pistol
Asin: B09JQT5CYK
This Optic Plate For Novak Does Not Fit Any Novak Cut That Is Not Genuine/Traditional/True Novak Rear Sight Cut, Such As Some Taurus 1911 And Some Ruger 1911 Who Use Licensed Novak Rear Sight But Created Their Own Sizes Cut. Minor Modification To The Sight Base May Be Necessary For Some 1911S Including Rock Islands, Citadels, And Gsg 1911 .22S..
The Red Dot Comes With Protective Cover, Screws, Wrenches, Instructions, Lens Cloth, Anti Flickering Shim. Full Metal Construction With Glass Lens. No Plastic Body, No Plastic Lens..
One Of The Advantage Of This Ade Plate Over Others Is This Optic Plate Has A Curved/Concaved Design That Will Sit Flush(Wrap The Top Curved Pistol Slide) On The Top Of The Pistol. Many Other Plates Are Flat Design..
6 Moa. Operates With A Single Cr2032 Battery(Installed Underneath). Multiple Brightness Setting. 1000 Hours Battery Life On The Brightest Setting. Auto Turns Off After 4 Hours. Approximately 1.01"H X 1.9"L X 1.1W.
Shock Proof，Fog Proof And Waterproof For 30 Minutes Under 4Ft Water. Fully Windage And Elevation Adjustable And Lockable; Unlimited Eye Relief. Full Metal Construction With Glass Lens. No Plastic Body, No Plastic Lens..
The Optic Plate For 1911 With Standard Novak Rear Sight Requires Removal The Rear Sight And Disassemble The Pistol. Gunsmith Experience Is Required. We Recommend Hiring A Professional Gunsmith. Please Note. Unprofessional Installation Such As Improper Torque(12In/Lb) Will Result In Screw Loose, Not Holding Zero, Damage To The Firearm/Optic And Personal Injury..
1911S Have Several Different Rear Sight Dovetail Cuts, Such As Colt(G.I.) Standard, Lpa, Novak Standard/Traditional And Novak Oversize Rear Sight. This Ade Optic Plate Made By Ade Is For Novak Standard/Traditional Rear Sight Only. It Does Not Fit Any 1911 That Does Not Has A Traditional Novak Rear Sight. Please Confirm With Your Pistol Manufacturer What Rear Sight You Have Before Purchasing..
Features
- Comes with an ADE Crusader RD3-009 RED dot sight, a picatinny plate(pre-assembled), and a optic mounting plate designed to fit 1911 pistols with standard Novak(does NOT fit Novak OVERSIZE) rear sight cut by replacing the factory rear sight on standard NOVAK dovetail.
- 1911s have several different rear sight dovetail cuts, such as Colt(G.I.) Standard, LPA, Novak standard/traditional and Novak Oversize rear sight. This ADE Optic Plate made by ADE is for Novak Standard/traditional rear sight ONLY. It does NOT fit any 1911 that does NOT has a traditional Novak rear sight. Please confirm with your pistol manufacturer what rear sight you have before purchasing.
- This optic plate for Novak Does NOT fit any Novak cut that is NOT GENUINE/traditional/true Novak rear sight cut, such as some Taurus 1911 and some Ruger 1911 who use Licensed Novak rear sight but created their own sizes cut. Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s.
- The optic plate for 1911 with Standard Novak rear sight requires removal the rear sight and disassemble the pistol. Gunsmith experience is required. We recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque(12in/lb) will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
- 6 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01H x 1.9L x 1.1W
- Shock proof Fog proof and Waterproof for 30 minutes under 4ft water. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
- The red dot comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim. Full metal construction with glass lens. No plastic body, no plastic lens.
- One of the advantage of this ADE plate over others is this optic plate has a CURVED/CONCAVED design that will sit flush(wrap the top curved pistol slide) on the top of the pistol. Many other plates are Flat design.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #19
Ade Advanced Optics Mini Red Dot Sight Mount Base for Taurus G2 series and Original G3, TX22 to Mount Crimson Trace CTS-1550,Swampfox Sentinal,JPoint,Shield RMSc,Romeo Zero,Vortex Defender CCW Red Dot
Asin: B09BBPXXXN
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots. Also Fit Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo X (Sorx1200 Only), Vortex Viper, Vortex Venom, Vortex Defender Ccw, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex Sight 2+, Docter/Noblex Sight Iii, Docter/Noblex Quicksight 5.0 Vr, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3.
Also Fits: Delta Optical Minidot, Delta Optical Minidot Ii, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, Makdot 1×25, Vector Optics Scrd-19Ii Frenzy 1X17x24, Creative Xp Glasseagle Hd, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Dragonfly, Hex Wasp, Crimson Trace Ct Rad Pro, Crimson Trace Cts-1550, Crimson Trace Cts-1250, Cyelee Calf V2, Cyelee Cat Pro, Or Vomz Pilad 1×20..
*** The Jpoint, Shield Rmsc, Shield Smsc, Shield Rms2, Romeo Zero, Romeo X (Sorx1200 Only), Vortex Defender Ccw, Holosun 507K, Holosun 407K, Sightmark Mini, Riton Mpr D2, Riton 3 Tactix Mprd, Swampfox Sentinal, Hex Wasp, Cyelee Cat Pro, Crimson Trace Cts-1550, And Ade Rd3-018 Spike, Rd3-021 Nuwa, Rd3-021 Pro, Rd3-030 Apollo Mount Using The Rear Set Of Mounting Holes And Do Not Use The Locating Pins At The Front Of The Plate. **.
Features
- This optic plate is made to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo). Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor.
- *** The JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo Zero, Romeo X (SORX1200 only), Vortex Defender CCW, Holosun 507K, Holosun 407K, Sightmark Mini, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Wasp, Cyelee CAT PRO, Crimson Trace CTS-1550, and ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 PRO, RD3-030 Apollo mount using the rear set of mounting holes and do not use the locating pins at the front of the plate. **
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit JPoint, Shield RMSc, Shield SMSc, Shield RMS2, Romeo X (SORX1200 only), Vortex Viper, Vortex Venom, Vortex Defender CCW, Holosun 507K, Holosun 407K, Romeo Zero, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III, Docter/Noblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3
- Also Fits: Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1 25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1 25, Vector Optics SCRD-19II Frenzy 1x17x24, Creative XP GlassEagle HD, Riton MPR D2, Riton 3 Tactix MPRD, Swampfox Sentinal, HEX Dragonfly, HEX Wasp, Crimson Trace CT RAD Pro, Crimson Trace CTS-1550, Crimson Trace CTS-1250, Cyelee CALF V2, Cyelee CAT PRO, or Vomz Pilad 1 20.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon #20
Ade Advanced Optics Red Dot Mounting Plate/Base/Adapter for Steyr A1 A2 Pistol - Compatible with Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight
Asin: B08B7MX9GJ
Fit Ade Rd3-006A(Huracan), Rd3-006B(Python), Rd3-009(Crusader), Rd3-012(Delta), Rd3-013(Bertrillium), Rd3-015(Zantitium)Red Dots..
Machined From Aircraft Grade Aluminum With Hard Anodizing Finish. Comes With Screws And Hardware For Installation..
Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech Mrds, Docter, Insight, Sightmark Minishot And Similar Red Dots..
This Optic Plate Is Compatible With S-A1 C-A1 M-A1 L-A1 M9-A1, L9-A2, C9-A2, M9-A2. Does Not Fit Any Other Models That Is Not Listed Here..
Features
- This brand new designed optic mounting plate made by ADE is to REPLACE the rear sight of certain Steyr A1 and A2 Handgun.
- This Optic Plate is Compatible with S-A1 C-A1 M-A1 L-A1 M9-A1, L9-A2, C9-A2, M9-A2. Does NOT fit any other models that is not listed here.
- Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots.
- Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.
- Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation.
- See more on Amazon...
Brand: Ade Advanced Optics | Manufacturer: Ade Advanced Optics
See On Amazon
Looking For Something Else?
Search