MK8 Hot End Extruder Nozzle Kit 0.4mm for 3D Printer,Assembled Extruder Brass Kits 1.75mm,30mm A8 Throat Tubing Aluminum Heater Block for RapRep i3 Anet A2 A8 3D Printer Part Replacement
Asin: B0894GW1R9 | Model: D13532-1 | PartNumber: D13532-1 | Ean: 0701715433960 | UPC: 701715433960
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.30Mm Length Extruder 1.75Mm Tube, Made From Stainless Steel ,Compatible With 1.75Mm Pla Abs 3D Printer, Reduces Extrusion Force And Improve Reliability Of Retractions Thanks To The Improved Internal Surface Finish.
You Can Repair Your Extruder With This Kit Instead Of Replacing A New One When Your Extruder Suffers A Clog That Can't Be Fixed. A Great Replacement Hot End For Mk8, I3, E3d, Anet A8, Alunar M508, Cr7, V2 Etc.
Heater Block: Aluminium Material Heater Block, 2Cm X 2Cm X 1Cm, Comes With A Necessary M6d Screw. Working Perfectly With Abs And Pla Filaments.
Nozzle: 0.4Mm Extruder Brass Nozzle Print Head, Compatible With 1.75Mm Pla Abs 3D Printer.
Features
- Heated Tubing :12V/40W high temperature resistance heater (wire length 1M/39.4inches), operating temperature range:0~+280 C (0~+538 F)
- Nozzle: 0.4mm Extruder Brass Nozzle Print Head, Compatible with 1.75mm PLA ABS 3D printer
- 30mm Length Extruder 1.75mm Tube, made from stainless steel ,compatible with 1.75mm PLA ABS 3D printer, reduces extrusion force and improve reliability of retractions thanks to the improved internal surface finish
- Heater block: Aluminium Material heater block, 2cm X 2cm X 1cm, comes with a necessary M6d screw. Working perfectly with ABS and PLA filaments
- You can repair your extruder with this kit instead of replacing a new one when your extruder suffers a clog that can't be fixed. A great replacement hot end for MK8, i3, E3D, Anet A8, Alunar M508, CR7, V2 etc
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon Similar To MK8 Hot End Extruder Nozzle
#1
Comgrow 25PCS MK8 Ender 3 V2 Nozzles 0.4MM, 3D Printer Brass Hotend Nozzles with DIY Tools Storage Box for Creality Ender 3/Ender 3 Pro/Ender 3 Max/5 Pro/Ender 3 S1/Ender 3 Neo/CR 10 Series 3D Printer
Asin: B0B9LYZSKC
Strong Practicability - Storage Box For Easy Carrying And Storage Of Small Accessories.The Nozzle Cleaning Needle Is Made Of High-Quality Stainless Steel With Good Toughness And Is Not Easy To Break, And The Nozzle Can Be Cleaned From Multiple Angles.The Hexagon Wrench Makes The Adjustment Of The Nozzle Easier..
Wide Compatibility - Suitable For Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo And Cr 10 Series 3D Printers.Compatible With All 1.75Mm Pla Abs Filament 3D Printers..
High Precision - Input Diameter 1.75Mm, Smooth Inner Wall, Extruder Nozzle Diameter Error Less Than 0.02 Mm.Greatly Reduces The Risk Of Print Head Leaks And Avoids Nozzle Clogging..
Package List - The 3D Printer Extruder Nozzles Come With 0.4 Mm Brass Nozzles*25, Nozzle Cleaning Needles*10, Hexagon Wrench*1, Stainless Steel Tweezers*1, And A Storage Box..
Features
- Premium Quality - 25 PCs high-quality brass nozzles, good abrasion resistance, heat resistance, and corrosion resistance.It is convenient for you to replace them in time to achieve high-quality printing.
- Package List - The 3D printer extruder nozzles come with 0.4 mm brass nozzles*25, nozzle cleaning needles*10, hexagon wrench*1, stainless steel tweezers*1, and a storage box.
- Strong Practicability - Storage box for easy carrying and storage of small accessories.The nozzle cleaning needle is made of high-quality stainless steel with good toughness and is not easy to break, and the nozzle can be cleaned from multiple angles.The hexagon wrench makes the adjustment of the nozzle easier.
- High Precision - Input diameter 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm.Greatly reduces the risk of print head leaks and avoids nozzle clogging.
- Wide Compatibility - Suitable for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo and CR 10 Series 3D printers.Compatible with all 1.75mm PLA ABS filament 3D printers.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #2
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #3
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 inches
See On Amazon #4
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #5
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 pounds
See On Amazon #6
Mudder Hardened Steel Nozzle 0.4 Mm/ 1.75 mm 3D Printer Mk8 Nozzles High Temperature Wear Resistant Compatible with Ender 3/ Ender3 Pro, Prusa I3, Makerbot Creality Cr-10 All Metal Hotend
Asin: B089ZY11DD
High Precision: The Inner Wall Of The Mk8 Nozzles Is Smooth And Has No Burrs, The Viscosity Coefficient Is Small, Extruder Nozzle Diameter Error Less Than 0.02 Mm, Provide You A Accurate And Smooth Extrusion.
What You Get: Package Comes With 5 Pieces Of Black Mk8 Nozzles, The Size Is 0.4 Mm, Sufficient Quantity To Facilitate Your Timely Replacement, Achieving Quality Printing.
Compatibility: These 3D Printer Nozzles Compatible With Mk8 Hotend For Creality 3D Printers, Such As Ender-2/ Ender-3/ Ender-3 Pro/ Ender-5, Also Compatible With Creality Cr-10 All-Metal Hotend, Prusa I3, Anet A8, Reprap, Etc..
Good Performance: This Hardened Tool Steel Nozzle Has Higher Toughness And Hardness, Not Only Suitable For Common 1.75 Mm 3D Printer Filaments, But Also Can Print Filaments Of Carbon Fiber, Fiberglass, Etc..
Features
- Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy construction makes them durable to serve you for long time, suitable for 3D printing at high temperature
- Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can print filaments of carbon fiber, fiberglass, etc.
- High precision: the inner wall of the MK8 nozzles is smooth and has no burrs, the viscosity coefficient is small, extruder nozzle diameter error less than 0.02 mm, provide you a accurate and smooth extrusion
- Compatibility: these 3D printer nozzles compatible with MK8 hotend for Creality 3D printers, such as Ender-2/ Ender-3/ Ender-3 pro/ Ender-5, also compatible with Creality CR-10 all-metal hotend, Prusa i3, Anet A8, Reprap, etc.
- What you get: package comes with 5 pieces of black MK8 nozzles, the size is 0.4 mm, sufficient quantity to facilitate your timely replacement, achieving quality printing
- See more on Amazon...
Brand: Mudder | Manufacturer: Mudder
See On Amazon #7
Official Creality Ender 3 V3 SE Nozzles 0.4mm 5PCS High-Speed Brass Nozzles 3D Printer Accessories M6 Hotend Extruder Nozzle for Ender 5 S1/Ender 7 3D Printer
Asin: B0C8HQKXJR
【Perfect And Durable】The Brass Nozzle Has Better Thermal Conductivity. It Is Recommended To Print At Standard Temperature. Filaments Like Pla, And Tpu Are Ideal Choices. It Not Only Reduces The Resistance, Avoids The Clogging Of The Filament On The Rounded Chamfer, But Also Has A Long Service Life And Makes The Filament Smoother..
【After-Sales Support】Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Precise Design】Each Side Of The 3D Printer Nozzle Is Cut By A Diamond Knife, So Its Contact Surface Is Flatter. The Extruder Nozzle Can Effectively Prevent The Print Head From Leaking And Produce A Smooth, Bright And Consistent Printing Effect..
【Quality Assurance】Creality 100% Official, 5Pcs M6 Extruder Nozzles Are Made Of High-Quality National Standard Brass, Centering Cnc Precision Automatic Lathe And One-Step Molding Technology, With Precise Tooth Shape And No Burr, To Ensure That The Input And Output Holes Have A High Degree Of Concentricity And Better Preventing Print Head Leakage..
Features
- Compatible Our high speed nozzles Only suitable for Creality Ender 5 S1/Ender 7/Ender 3 V3 SE 3D Printer hotend and Spider 1.0 hotend kit.
- Quality Assurance Creality 100% official, 5PCS M6 extruder nozzles are made of high-quality national standard brass, centering CNC precision automatic lathe and one-step molding technology, with precise tooth shape and no burr, to ensure that the input and output holes have a high degree of concentricity and better preventing print head leakage.
- Perfect and Durable The brass nozzle has better thermal conductivity. It is recommended to print at standard temperature. Filaments like PLA, and TPU are ideal choices. It not only reduces the resistance, avoids the clogging of the filament on the rounded chamfer, but also has a long service life and makes the filament smoother.
- Precise Design Each side of the 3D printer nozzle is cut by a diamond knife, so its contact surface is flatter. The extruder nozzle can effectively prevent the print head from leaking and produce a smooth, bright and consistent printing effect.
- After-sales Support Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
0.4MM MK8 Ender 3 Nozzles 25 pcs 3D Printer Brass Nozzles Extruder for Makerbot Creality CR-10 with 5 Needles and Metal Storage Box (0.4mm)
Asin: B082PZG1RZ | Model: LM-G1RZ | PartNumber: LM-G1RZ | Ean: 0734830917633 | UPC: 734830917633
Precision Process: Made With Centering Cnc Precision Automatic Lathe And One-Time Forming Technology, Make Sure The Input And Output Holes Are Concentric And The Interior Of Nozzle Is Smooth Without Burrs. Due To All Of Above, Not Only Reduce The Resistance, Avoid Filament Getting Stuck On Nozzle, But Also Effectively Guarantee The Service Life Of The Nozzle, Make Out Of Filament More Smoother..
Each Of Our Kit Only Comes In A Single Size, So You Can Feel Free Mix And Match!.
Precise Design: Cutting With The Diamond Knife, Make The Contact Surface More Flat, So It Reduces The Risk Of Printhead Leakage Greatly And Avoid Nozzles Clogging..
Applicability And Compatibility: Our Nozzles Fit For 3D Printer Makerbot Creality Cr-10, Mk8 Makerbot Reprap Prusa I3, Compatible With All 1.75Mm Pla Abs 3D Printer. Fit Exactly Like The Original..
Features
- Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.
- Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
- Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother.
- Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging.
- Each of our kit only comes in a single size, so you can feel free mix and match!
- See more on Amazon...
Brand: Meafeng | Manufacturer: Meafeng
Dimensions: 3.94 x 3.94 x 3.94 inches
See On Amazon #9
25 PCS 3D Printer Brass Nozzles 0.4mm, Fosvrde MK8 Ender 3 Nozzles Extruders for with DIY Tools and Metal Storage Box for Ender 3/Ender 3 Pro/Ender 3 V2 CR-10
Asin: B0CR8KDRSM
【Product Feature】-The Brass Nozzle Shape Is Smooth And Bright With Lettering, Let You Better Distinguish The Details See The Quality. The Inner Wall Is Smooth And Smooth, The Cutting Chamfer Joint Is Closely Fitted, Avoid Filament Getting Stuck On Nozzle, So It Reduces The Risk Of Printhead Leakage Greatly And Avoid Nozzles Clogging..
【Wide Compatibility】-The For 3D Printer Mk8 Suitable For 3D Printer Mk8 Cr-10, Are Compatible With For Ender 3/Ender 3 Pro/Ender 3S/Ender 3 V2 Cr-10 And Compatible With Most 1.75Mm 3D Printers.
【Product Parameter】- Input Diameter 0.2Mm, Output Diameter 1.75Mm, Out Thread M6, Diameter 0.4 Mm, The Outer Surface Is Marked With A Size, So You Can Easily Identify The Specifications Of The Nozzle..
【Value For Money】】- Mk8 Nozzles Kit Come With 25 Nozzle Pieces, But It Also Includes 5 Nozzle Cleaners And 1 Hexagon Wrench,1 Stainless Steel Tweezers. These Accessories Make It Easier For You To Maintain And Clean Your Printer For Optimal Performance..
Features
- Premium quality materials - The Fosvrde 25PCS MK8 nozzles made of high-quality brass material, faster heat conduction and corrosion resistance, achieve high-quality printing.
- Value for money - MK8 nozzles kit come with 25 nozzle pieces, but it also includes 5 nozzle cleaners and 1 hexagon wrench,1 stainless steel tweezers. these accessories make it easier for you to maintain and clean your printer for optimal performance.
- Product feature -The brass nozzle shape is smooth and bright with lettering, Let you better distinguish the details see the quality. the inner wall is smooth and smooth, the cutting chamfer joint is closely fitted, avoid filament getting stuck on nozzle, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging.
- Product parameter - Input diameter 0.2mm, output diameter 1.75mm, out thread M6, diameter 0.4 mm, the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.
- Wide compatibility -The for 3D Printer MK8 Suitable for 3D printer MK8 CR-10, are compatible with for Ender 3/Ender 3 Pro/Ender 3s/Ender 3 V2 CR-10 and Compatible with most 1.75mm 3D printers
- See more on Amazon...
Brand: Fosvrde | Manufacturer: Fosvrde
Dimensions: 0.70 x 7.00 x 1.50 inches | Weight: 0.30 pounds
See On Amazon #10
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon
Looking For Something Else?
Search