MakerFocus LoRa GPS Module LoRaWAN 863 928mHz Development Board LoRa Kit Ultra Low Power Design CP2102 SX1262 ASR6502 Chip with 0.96 inch OLED Display and Antenna for Ar duino and Intelligent Scene
Asin: B089YFZQQK | Model: U0CGDI77W16MU9R47168 | PartNumber: U0CGDI77W16MU9R47168
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Iot Board: Based On Asr6052, Those Chips Are Already Integrated The Mcu And Sx1262.
Oled Display Screen: Onboard 0.96-Inch 128*64 Dot Matrix Oled Display, Which Can Be Used To Display Debugging Information, Battery Power, And Other Information.
Onboard Solar Energy Management System And Lithium Battery Management System: It Can Directly Connect With A 5.5~7V Solar Panel; Onboard Sh1.25-2 Battery Interface, Charge And Discharge Management, Overcharge Protection, Battery Power Detection, Usb / Battery Power Automatic Switching.
Ultra Low Power Design And Application: 21Ua In Deep Sleep; Compatible With Ar Duino, At Command And Gps, Integrated Encryption Algorithm.
Features
- Note: LoRa GPS module comes unassembled and needs to be aseeembled by yourself
- Ultra Low Power Design and Application: 21uA in deep sleep; Compatible with Ar duino, AT command and GPS, integrated encryption algorithm
- IoT Board: Based on ASR6052, those chips are already integrated the MCU and SX1262
- Onboard Solar Energy Management System and Lithium Battery Management System: It can directly connect with a 5.5~7V solar panel; Onboard SH1.25-2 battery interface, charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching
- OLED Display Screen: Onboard 0.96-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power, and other information
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Weight: 0.05 Pounds
See On Amazon Similar To MakerFocus LoRa GPS Module LoRaWAN
#1
DIYmall 2 Sets 915MHZ ESP32 Lora V3 WiFi+BLE Development Board 0.96inch OLED Display ESP32-S3 Dual-core SX1262 Type-C Lora Kit for Arduino NodeMCU IoT
Asin: B08629526P | Model: FZ2886-AX2K | PartNumber: FZ2886-AX2K
The Mcu Is Different, So The Definitions Of V2 And V3 Gpio Pins Are Different.
What You Will Get: 2 X Esp32 Lora V3 Development Board + 2 X 915Mhz Antenna + 2 X Jst 1.25Mm-2P Connector Cable + 2.54 Pin (No Welding) + 2 X Protective Case For Lora Board.
When You Use Esp32 Oled Lora, You Need To Use 2Pcs Together. One Is Used For Receiving And Another For Sending.
It Is The Best Option For Smart Cities, Farms, Homes, Industrial Control, House Security, Wireless Meter Reading, And Iot Developers.
Upgraded V3 Version Has Better Impedance Matching Of Rf Circuits.
Mcu: Esp32-S3fn8 (V2 Is Esp32-D0wdq6), Lora Chip: Sx1262(V2 Is Sx1276/8), Usb Socket: Type-C(V2 Is Micro-Usb).
Features
- WiFi LoRa 32 is a classic IoT dev-board. The newly launched V3 version retains Wi-Fi, BLE, LoRa, OLED display, and other functions
- MCU: ESP32-S3FN8 (V2 is ESP32-D0WDQ6), LoRa Chip: SX1262(V2 is SX1276/8), USB Socket: Type-C(V2 is Micro-USB)
- The MCU is different, so the definitions of V2 and V3 GPIO pins are different
- Upgraded V3 version has better impedance matching of RF circuits
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
- What you will get: 2 X ESP32 Lora V3 development board + 2 X 915MHz Antenna + 2 X JST 1.25mm-2P Connector cable + 2.54 pin (no welding) + 2 X Protective Case for lora board
- See more on Amazon...
Brand: DIYmall | Manufacturer: Heltec Automation Technology Co., Ltd
Dimensions: 0.38 x 1.97 x 1.00 Inches
See On Amazon #2
DIYmalls 915 ESP32 LoRa OLED Board V3 Type-C SX1262 + 915MHz LoRa Antenna U.FL IPEX to SMA for Arduino IOT LoraWan Gateway, not Compatible with LoRa 32 V2
Asin: B086ZFCV7F | Ean: 0747356634250 | UPC: 747356634250
You Will Receive, 1Pcs 915Mhz Esp32 Lora V3, 1Pcs 915Mhz Lora Antenna,And 1Pcs 2Pin 1.25Mm Connector..
Lora 32 V2 Use Esp32-D0wdq6 Mcu, But The V3 Is Esp32-S3fn8, So Pinout Is Different. The Apis Used With The Libraries Are Different, So Programs Written For V2 Do Not Compile V3..
Support Type-A To Type-C Cable Only, Not Type-C To Type-C Cable..
Lora V3 Board Are An Improvement Over The V2 Version, But They Are Not A Replacement..
When You Use Lora Esp32 915Mhz, You Need To Use 2Pcs Together,One Receiving And Another Sending..
Features
- This LoRa board comes unassembled, soldering is required, not equipped with lithium battery.
- When you use lora esp32 915MHz, you need to use 2pcs together,one receiving and another sending.
- You will receive, 1pcs 915MHz esp32 lora V3, 1pcs 915mhz lora antenna,and 1pcs 2pin 1.25mm connector.
- LoRa V3 board are an improvement over the V2 version, but they are not a replacement.
- LoRa 32 V2 use ESP32-D0WDQ6 MCU, but the V3 is ESP32-S3FN8, so pinout is different. The APIs used with the libraries are different, so programs written for V2 do not compile V3.
- Support type-A to type-C cable only, not type-C to type-C cable.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Weight: 0.05 pounds
See On Amazon #3
DIYmalls 915MHz LoRa ESP32 OLED Board V3 Type-C SX1262 8MB Flash + LoRa Antenna U.FL IPEX to SMA for Arduino LoraWan IOT (Pack of 2), not Compatible with LoRa 32 V2
Asin: B086ZG25DZ | Ean: 0747356634243 | UPC: 747356634243
-Lora Board 915Mhz Comes Unassembled, Soldering Required By You, Not Equipped With Lithium Battery..
-If You Want To Use The Lora 32 V3 Board With Case, Please Buy Another Smaller 915 Lora Antenna Because This Lora 915 Antenna Is Bigger Than The Lora Case..
-You Can Power 915 Lora Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, Type C 5V Power Is Recommended..
-The Newly Lora V3 Version Has The Same Pin Sequence And Function As The V2 Version. But The V3 Change Micro Usb Port To Be Type C..
Features
- -You will receive, 2pcs 915MHz esp32 lora V3, 2pcs 915mhz lora antenna,and 2pcs 2pin 1.25mm connector.
- -The newly LoRa V3 version has the same pin sequence and function as the V2 version. But the V3 change micro USB port to be type C.
- -LoRa board 915mhz comes unassembled, soldering required by you, not equipped with lithium battery.
- -You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.
- -If you want to use the lora 32 v3 board with case, please buy another smaller 915 lora antenna because this lora 915 antenna is bigger than the lora case.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.80 x 1.90 x 1.20 inches | Weight: 0.10 pounds
See On Amazon #4
GPS Module Receiver,Navigation Satellite Positioning NEO-6M (Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
Asin: B084MK8BS2 | Ean: 0608603912524 | UPC: 608603912524
Usb Directly Connected To The Computer, That Is, With The Host Computer-Owned Serial Port Function, No Need For External Serial Module, Send Ipx Interface Active Antenna;.
If You Have Any Issue When Using Our Product,Or You Need Product Use Documentation, Please Contact Us Directly For Assistance.We Will Reply Your Problem In 24 Hours.We Try Our Best To Provide The Most Professional Service For Each Customer..
Gt-U7 Main Module Gps Module Using The Original Ublox 7Th Generation Chip, Software Is Compatible With Neo-6M. Gt-U7 Module, With High Sensitivity, Low Power Consumption, Miniaturization, Its Extremely High Tracking Sensitivity Greatly Expanded Its Positioning Of The Coverage;.
Features
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned;
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage;
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna;
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
- See more on Amazon...
Brand: Deegoo-FPV | Manufacturer: Deegoo-FPV
See On Amazon #5
REYAX RYLR896 Lora Module SX1276 UART 868MHz 915MHz Antenna at Command FCC NCC
Asin: B07NB3BK5H | Model: RYLR896 | PartNumber: RYLR896 | Ean: 0644824865713, 0755874948070 | UPC: 755874948070, 644824865713
Features
- It is recommended to purchase RYLS135 USB to UART Bridge for your convenience in testing. https://www.amazon.com/dp/B0BP1PDPGL
- See more on Amazon...
Brand: REYAX | Manufacturer: REYAX
Dimensions: 0.22 x 1.67 x 0.72 Inches | Weight: 0.01 pounds
See On Amazon #6
GPS Module GPS NEO-6M(Ar duino GPS Drone Microcontroller GPS Receiver) Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning
Asin: B07P8YMVNT | Model: SN12SF83QOH11452IC | PartNumber: SN12SF83QOH11452IC | Ean: 0608603912524, 0673400165183 | UPC: 673400165183, 608603912524
Gps Baud Needs To Be Set To 9600 Instead Of 4800; Pps Pin Is Not Needed Unless Using The Gps To Drive A Hardware High Precision Clock; Gt-U7 Main Module Gps Module Using The Original Ublox 7Th Generation Chip, Software Is Compatible With Neo-6M. Gt-U7 Module, With High Sensitivity, Low Power Consumption, Miniaturization, Its Extremely High Tracking Sensitivity Greatly Expanded Its Positioning Of The Coverage.
Usb Directly Connected To The Computer, That Is, With The Host Computer-Owned Serial Port Function, No Need For External Serial Module, Send Ipx Interface Active Antenna.
With A Usb Interface, You Can Directly Use The Phone Data Cable On The Computer Point Of View Positioning Effect; With Ipex Antenna Interface, The Default Distribution Of Active Antenna, Can Be Quickly Positioned.
Note: Please Use The Gt-U7 Gps Module In An Open Place, The Led Will Flash After The Satellite Signal Is Found. Bad Weather And Indoor Use Will Affect The Accuracy Of Positioning.
Features
- How to use the GPS module better, the link is obtained in the Product guides and documents, please download it before use
- Note: Please use the GT-U7 GPS module in an open place, the LED will flash after the satellite signal is found. Bad weather and indoor use will affect the accuracy of positioning
- GPS baud needs to be set to 9600 instead of 4800; PPS pin is not needed unless using the GPS to drive a hardware high precision clock; GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 1.09 x 3.94 inches | Weight: 0.01 pounds
See On Amazon #7
HiLetgo ESP32 LoRa V3 SX1262 0.96 inch OLED Display Development Board WiFi Bluetooth Dual Core 240MHz CP2102 and 433-510MHz Antenna for Arduino Smart WiFi LoRa 32(Unsoldered)
Asin: B07FYWFH4C | Model: 8541612537 | PartNumber: 8541612537
Type-C Usb Interface With A Complete Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding, And Other Protection Measures..
Integrated Cp2102 Usb To Serial Port Chip,.
Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System.
Sx1262 Lora Node Chip..
Features
- Microprocessor: ESP32-S3FN8dual-core processor, frequency up to 240 MHz
- SX1262 LoRa node chip.
- Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.
- Onboard SH1.25-2 battery interface, integrated lithium battery management system
- Integrated CP2102 USB to serial port chip,
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.07 pounds
See On Amazon #8
915MHz ESP32 LoRa OLED Development Board V3 SX1262 Type-C + LoRa Antenna for Arduino LoraWan IOT Internet of Thing (Pack of 2), not Compatible with LoRa V2
Asin: B07HJ49VN8 | Ean: 0747356629140 | UPC: 747356629140
0.96 Oled Is Mounted On Esp32 Lora Board Via 4 Screws, So It Is Removable But Pls Be Careful To Do It To Avoid Damage..
The 915 Lora Antenna Is A Little Big. If You Want To Use The Lora V3 Board With Case, You Need To Buy Another Small Lora Antenna.
You Will Receive, 2Pcs Lora Oled Board 915Mhz New Version V3, And 2Pcs 915Mhz Lora Antenna..
When You Use Esp32 Oled Lora, You Need To Use 2Pcs Together. One Is Used For Receiving And Another For Sending.
Features
- The esp32 lora 915mhz comes unassembled, soldering is required, not equipped with lithium battery.
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- 0.96 oled is mounted on esp32 lora board via 4 screws, so it is removable but pls be careful to do it to avoid damage.
- You will receive, 2pcs lora oled board 915mhz new version V3, and 2pcs 915mhz lora antenna.
- The 915 lora antenna is a little big. If you want to use the lora v3 board with case, you need to buy another small lora antenna
- See more on Amazon...
Brand: NEXTION | Manufacturer: DIYmalls
Dimensions: 0.80 x 1.90 x 1.20 inches | Weight: 0.10 pounds
See On Amazon #9
2 Sets Esp32 Lora V3 915mhz WiFi+BLE Development Board Kit 0.96inch OLED Display SX1262 + Lora V3 case +824-960MHz Antenna for Arduino NodeMCU IoT
Asin: B0CW9SP6LR
3. Enhanced User Experience: Features A 0.96-Inch Oled Display For Easy Debugging And Real-Time Information Display, Enhancing User Interaction And Convenience.
5. Simplified Development: Compatible With The Arduino Development Environment And Equipped With A Cp2102 Usb To Serial Port Chip For Easy Program Downloading And Debugging, Streamlining The Development Process For Users.
4. Reliable Protection: Incorporates Comprehensive Protection Measures Including Voltage Regulation, Esd Protection, Short Circuit Protection, And Rf Shielding, Ensuring Device Safety And Longevity.
2. Versatile Connectivity: Seamlessly Integrates Wifi, Lora, And Bluetooth Connections, Offering Extensive Networking Options For Diverse Applications.
Features
- 1. Powerful Processing: Equipped with an ESP32-S3FN8 microprocessor featuring a dual-core Xtensa LX7 architecture running at frequencies up to 240 MHz, delivering robust computational capabilities
- 2. Versatile Connectivity: Seamlessly integrates WiFi, LoRa, and Bluetooth connections, offering extensive networking options for diverse applications
- 3. Enhanced User Experience: Features a 0.96-inch OLED display for easy debugging and real-time information display, enhancing user interaction and convenience
- 4. Reliable Protection: Incorporates comprehensive protection measures including voltage regulation, ESD protection, short circuit protection, and RF shielding, ensuring device safety and longevity
- 5. Simplified Development: Compatible with the Arduino development environment and equipped with a CP2102 USB to serial port chip for easy program downloading and debugging, streamlining the development process for users
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
Dimensions: 0.40 x 1.98 x 1.00 inches
Warranty: NO
See On Amazon #10
868MHz 915MHz WiFi LoRa 32 V3 Module Development Board Type-C SX1262 Integrated WiFi Bluetooth - ESP32 0.96 inch OLED Display 8MB Flash IOT Lora Dev-Board + Antenna U.FL IPEX to SMA 915MHz
Asin: B07HD1CRPD | Ean: 0747356632119 | UPC: 747356632119
🚩 8Mb Memory Storage Capacity.
🚩 Comes With One U.Fl Ipex To Sma Connector Lora Antenna.
🚩 Type-C Usb Interface With A Complete Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding, And Other Protection Measures.
🚩 Frequency: 863~928Mhz; Wi-Fi: 802.11 B/G/N, Up To 150Mbps.
Features
- WiFi LoRa 32 is a classic IoT development board, V3 version, integrated Wi-Fi, BLE, LoRa, 0.96 inch OLED display and other functions. Not Compatible with LoRa 32 V2.
- Frequency: 863~928MHz; Wi-Fi: 802.11 b/g/n, up to 150Mbps
- 8MB Memory Storage Capacity
- Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures
- Comes with one U.FL IPEX to SMA Connector LoRa Antenna
- See more on Amazon...
Brand: Stemedu | Manufacturer: Stemedu/Heltec Automation Technology Co., Ltd
See On Amazon 
Looking For Something Else?
Search