DAOKI 10 Pcs 3.3V to 5V 4 Channels IIC I2C Logic Level Converter Bi-Directional Shifter Module for Arduino/Raspberry Pi with Dupont Cable
Asin: B08BZ5X8XH | Model: DR-US-324 | PartNumber: DR-US-324 | Ean: 3494370802390
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Each Level Converter Has The Capability Of Converting 4 Pins On The High Side To 4 Pins On The Low Side With Two Inputs And Two Outputs Provided For Each Side..
Package Content:10 X 4 Channels Iic Logic Level Converter, 1 X Dupont Cable Male To Male 40Pin.
Dimensions: 16.05 X 13.33Mm / 0.63 X 0.52Inch (Lxw).
This Level Converter Works With 2.8V And 1.8V Devices, It Can Bidirectionally Transfer With 4 Channels Between High Logic Voltage And Low Logic Voltage..
Features
- The bi-directional logic level converter is a small device, which can safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time.
- This level converter works with 2.8V and 1.8V devices, it can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage.
- Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.
- Dimensions: 16.05 x 13.33mm / 0.63 x 0.52inch (LxW)
- Package Content:10 x 4 Channels IIC Logic Level Converter, 1 x Dupont Cable Male to Male 40PIN
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.22 Pounds
See On Amazon Similar To DAOKI 10 Pcs 3.3V to
#1
HiLetgo 5pcs DC-DC 12V to 3.3V 5V Power Module 3.3V 5V 12V Multi Output Voltage Conversion
Asin: B00WG9I3B6 | Model: 3-01-0791 | PartNumber: 3-01-0791 | Ean: 0702949574580 | UPC: 702949574580
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
Dorhea 7 Pack 3.3V DC-DC Buck Converter 3 Pins AMS1117-3.3V DC 4.75V-12V to 3.3V Voltage Regulator Step Down Power Supply 800mA Buck Module
Asin: B089MZM12H | Model: D13540-1 | PartNumber: D13540-1 | Ean: 0701715434035 | UPC: 701715434035
Applicable For High-Efficiency Linear Regulator Published Active Power Regulator Battery Charger Active Instrument..
Ams1117 Overheat Shutdown Circuit Provides Overload And Over-Temperature Protection. Ams1117-3.3V Buck Converter Soldering Kit Only Supports 3.3V,800Ma Output, So The Load Current Can Not Exceed 800Ma..
Applications: Msp430 Development Board; 3.3V Low Power Consumption Mcu; Fpga/Cpld Pld Programmable Logic Systems; Arm7 Arm9 Arm11 Stm32; Etc..
The Voltage Regulator Converter Module Is Suitable For Electronic Devices, With The Design Of 3 Pins, This Buck Converter Is Easy To Connect Your Mcu Development And Provide Constant Power Supply, Which Suitable For Electronic Devices Such As Scm Project Design Needs 3.3V Power Supply..
Features
- AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
- The voltage regulator converter module is suitable for electronic devices, with the design of 3 pins, this buck converter is easy to connect your MCU development and provide constant power supply, which suitable for electronic devices such as SCM project design needs 3.3V power supply.
- Applicable for high-efficiency linear regulator Published Active Power Regulator Battery Charger Active instrument.
- Applications: MSP430 Development Board; 3.3V Low power consumption MCU; FPGA/CPLD PLD Programmable Logic Systems; ARM7 ARM9 ARM11 STM32; etc.
- AMS1117 overheat shutdown circuit provides overload and over-temperature protection. AMS1117-3.3V Buck Converter soldering kit only supports 3.3V,800mA output, So the load current can not exceed 800mA.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
Weight: 0.03 Pounds
See On Amazon #3
DAOKI 10PCS Mini360 3A DC Voltage Step-Down Power Converter Buck Module 5V 9V 12V
Asin: B07X96SL55 | Model: TS-US-320 | PartNumber: TS-US-320 | Ean: 0787937380077 | UPC: 787937380077
Baud Rate :300-9216000Bps, Automatically Detect The Serial Data Rate Signal.
Interface Protection: Tvs Tube Protection, Usb Self-Recovery Protection.
Load Capacity: Supports Multipoint, Each Converter Allows Connecting 32 Rs485 Interface Device.
Direction Control: Automatic Data Flow Control Technology, Automatic Identification And Control Data Transfer Direction.
Features
- Standard: USB2.0 standard, backward compatible, in line with RS485 standard
- Direction control: automatic data flow control technology, automatic identification and control data transfer direction
- Baud Rate :300-9216000bps, automatically detect the serial data rate signal
- Load capacity: supports multipoint, each converter allows connecting 32 RS485 interface device
- Interface protection: TVS tube protection, USB self-recovery protection
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
See On Amazon #4
Anmbest 10 Pack 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Step Down Power Supply Buck Module 800mA
Asin: B07CP4P5XJ | Model: Anmbest_MD01 | PartNumber: Anmbest_MD01 | Ean: 7898822206532
Applicable For High-Efficiency Linear Regulator Published Active Power Regulator Battery Charger Active Instrument..
Ams1117 Overheat Shutdown Circuit Provides Overload And Over-Temperature Protection..
Applications: Arduino Uno Mega2560; Msp430 Development Board; 3.3V Low Power Consumption Mcu; Fpga/Cpld Pld Programmable Logic Systems; Arm7 Arm9 Arm11 Stm32; Etc..
The Module Is Suitable For Electronic Devices Such As Scm Project Design Needs 5V Power Supply, It Is Simple Dual-Panel Design And The Input Output Using The 2 Pin Single Row Pin For Easy Connection. Ams1117-3.3 Pinout Can Be Easy To Connected With Your Mcu Development And Provide The Contant Power Supply..
Features
- AMS1117-3.3 is a positive Voltage Regulator Step Down Power Supply Module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
- The module is suitable for electronic devices such as SCM project design needs 5V power supply, It is simple Dual-panel design and the Input output using the 2 Pin single row pin for easy connection. AMS1117-3.3 pinout can be easy to connected with your MCU development and provide the contant power supply.
- Applicable for high-efficiency linear regulator Published Active Power Regulator Battery Charger Active instrument.
- Applications: Arduino UNO MEGA2560; MSP430 Development Board; 3.3V Low power consumption MCU; FPGA/CPLD PLD Programmable Logic Systems; ARM7 ARM9 ARM11 STM32; etc.
- AMS1117 overheat shutdown circuit provides overload and over-temperature protection.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: Anmbest
Weight: 0.01 pounds
See On Amazon #5
DAOKI 10Pcs Step-Down Power Supply Module Mini DC-DC 12-24V to 5V 3A Voltage Buck Converter Adjustable 1.8V 2.5V 3.3V 5V 9V 12V
Asin: B07X86VKCL | Model: TS-US-314 | PartNumber: TS-US-314 | Ean: 0787937380015 | UPC: 787937380015
3144 Series Hall Principle Of Hall Effect Switch Ic, Using Technology To Produce Magnetic Semiconductor Integrated Circuit, Which Is Determined By The Voltage Regulator,.
This Section Circuit Pipe Legs With Pure Tin Production, The Complete Model Is 3144Eua-S Or 3144Lua-S..
Hall Voltage Generator, Differential Amplifier, Schmidt Trigger, Temperature Compensation Circuit And The Collector Electrode Open Circuit Output Stage Consisting Of Magnetic Sensing Circuit, The Input For The Magnetic Flux Density, The Output Is A Digital Voltage Signal..
Small Size And High Sensitivity. Fast Response Temperature And Good Performance. Precision And High Reliability.
Features
- This is Hall Effect magnetic sensor module DC 5V for Arduino
- Small size and high sensitivity. Fast response temperature and good performance. Precision and high reliability
- 3144 Series Hall principle of Hall effect switch IC, using technology to produce magnetic semiconductor integrated circuit, which is determined by the voltage regulator,
- Hall voltage generator, differential amplifier, Schmidt trigger, temperature compensation circuit and the collector electrode open circuit output stage consisting of magnetic sensing circuit, the input for the magnetic flux density, the output is a digital voltage signal.
- This section circuit pipe legs with pure tin production, the complete model is 3144EUA-S or 3144LUA-S.
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
See On Amazon #6
DAOKI 10Pcs 5V to 3.3V Step-Down Power Supply Buck Module DC 4.75V-12V to 3.3V Voltage Regulator AMS1117-3.3 LDO 800MA Buck Module Soldering Kit
Asin: B08214MRSW | Model: GR-US-321 | PartNumber: GR-US-321
Ams1117-3.3V Step Down Module Pinout Can Be Easy To Connected With Your Mcu Development And Provide The Constant Power Supply..
Attention: Ams1117-3.3V Buck Voltage Module Soldering Kit Only Support 3.3V,800Ma Output, So The Load Current Cannot Exceed 800Ma..
Application: Arduino Uno Mega2560; Msp430 Development Board; 3.3V Low Power Consumption Mcu; Fpga/Cpld Pld Programmable Logic Systems; Arm7 Arm9 Arm11 Stm32; Etc..
The Voltage Regulator Module Can Be Used For Electronic Devices, Such As Scm Project Design Needs 3.3V Power Supply, It Is Simple Dual-Panel Design And The Input Output Using The 2 Pin Single Row Pin For Easy Connection..
Features
- AMS1117-3.3 is a positive Voltage Regulator Step Down Power Supply Module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
- The Voltage Regulator module can be used for electronic devices, such as SCM project design needs 3.3V power supply, it is simple Dual-panel design and the Input output using the 2 Pin single row pin for easy connection.
- AMS1117-3.3V Step down Module pinout can be easy to connected with your MCU development and provide the constant power supply.
- Application: Arduino UNO MEGA2560; MSP430 Development Board; 3.3V Low power consumption MCU; FPGA/CPLD PLD Programmable Logic Systems; ARM7 ARM9 ARM11 STM32; etc.
- Attention: AMS1117-3.3V Buck Voltage module soldering kit only support 3.3V,800mA output, So the load current cannot exceed 800mA.
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
See On Amazon #7
15Pcs 5V to 3.3V DC-DC Step Down Power Supply Buck Module AMS1117 3.3V 800MA Automatic Adjustable Boost Board Start Limit Voltage
Asin: B09WTVGJL3 | Model: 13397-1 | PartNumber: 13397-1 | Ean: 0701715506930 | UPC: 701715506930
The Module Is Suitable For Electronic Devices Such As Scm Project Design Needs 5V Power Supply, It Is Simple Dual-Panel Design And The Input Output Using The 2 Pin Single Row Pin For Easy Connection..
Ams1117-3.3 Pinout Can Be Easy To Connected With Your Mcu Development And Provide The Contant Power Supply..
Buck Module Input Voltage Must Be Who The Output Voltage Of 1.5 V Or 2 V, Otherwise It Can Not Output The Enough Power!.
Ams1117 Step-Down Power Supply Buck Module The Output: 3.3 V, 800 Ma (The Load Current Can 'T Wining 800 Ma).
Features
- AMS1117 step-down power supply buck module input: 4.5 V DC - 7 V (input voltage must be wining the to the output voltage high 1 V above.)
- AMS1117 step-down power supply buck module the output: 3.3 V, 800 mA (the load current can 't wining 800 mA)
- The module is suitable for electronic devices such as SCM project design needs 5V power supply, It is simple Dual-panel design and the Input output using the 2 Pin single row pin for easy connection.
- Buck module input voltage must be who the output voltage of 1.5 V or 2 V, otherwise it can not output the enough power!
- AMS1117-3.3 pinout can be easy to connected with your MCU development and provide the contant power supply.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #8
DAOKI 10PCS DC-DC Boost Converter Module 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V Step-Up Voltage Power Supply Module with 40Pin Header
Asin: B08M2YVQYQ | Model: DR-US-368 | PartNumber: DR-US-368
Note:Input Voltage Can Not Be Greater Than The Maximum Input Range; Output Power Can Not Be Greater Than The Maximum Load For A Long Time; Input Power Must Be Greater Than The Output Power, Because The Power Consumption Of The Module Itself.
Package Content:10 X Dc-Dc Boost Converter Module 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V, 1 X 40Pin Header.
Widely Use For Wireless Module, Development Board, Camera, Video Camera, Vcr, Mp3/Mp4 Player, Audio Equipment, Wireless Communication Equipment.
Input:1-1.5V, Output:5V 40-100Ma; Input:1.5-2V, Output:5V 100-150Ma; Input:2-3V, Output:5V 150-380Ma; Input Above 3V, Output:5V 380-480Ma;.
Features
- Input voltage:0.9~ 5V; output voltage:5V; Maximum output current: 480 MA; Working frequency:150KHZ, Efficiency <85%
- INPUT:1-1.5V, OUTPUT:5V 40-100MA; INPUT:1.5-2V, OUTPUT:5V 100-150MA; INPUT:2-3V, OUTPUT:5V 150-380MA; INPUT above 3V, OUTPUT:5V 380-480MA;
- Note:Input voltage can not be greater than the maximum input range; Output power can not be greater than the maximum load for a long time; Input power must be greater than the output power, because the power consumption of the module itself
- Widely use for Wireless Module, Development Board, Camera, Video camera, VCR, MP3/MP4 player, Audio equipment, Wireless communication equipment
- Package Content:10 x DC-DC Boost Converter Module 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V, 1 x 40Pin Header
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.22 Pounds
See On Amazon
Looking For Something Else?
Search