Fafeicy 10S 36V 30A Li-ion Cell 18650 Battery Protection BMS PC B Board with Balance Function 36V for 10 Series Cell Li-ion Batteries
Asin: B08CR9WV8C | Ean: 8781940117721
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Protection Board Supports Overcharge Protection, Over-Discharge Protection And Short Circuit Protection. The Package Including One Protection Board, And One Cable..
The Overdischarge Protection Voltage Is 2.6V, And The Overcharge Protection Voltage Is 4.25V..
The Protection Board Is Suitable For Electric Car, Electric Power Assistant Car, Skateboard Car, Inverter, Etc..
It Has Balance Function Which Would Ensure Each Battery Cell Being Fully Charged At Same Time. The Maximum Working Current Is 30A, And The Continuous Maximum Current Is 20A..
Features
- The protection board is for 10 series cell Li-ion batteries, it can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
- It has balance function which would ensure each battery cell being fully charged at same time. The maximum working current is 30A, and the continuous maximum current is 20A.
- This Protection Board supports overcharge protection, over-discharge protection and short circuit protection. The package including one protection board, and one cable.
- The Protection Board is suitable for electric car, electric power assistant car, skateboard car, inverter, etc.
- The overdischarge protection voltage is 2.6v, and the overcharge protection voltage is 4.25v.
- See more on Amazon...
Brand: Fafeicy | Manufacturer: Fafeicy
Dimensions: 2.36 x 7.09 x 6.69 inches
See On Amazon Similar To Fafeicy 10S 36V 30A Liion
#1
36v 10a Volt Power Supply 36v Power Supply, 36v 10a Power SupplySwitching Charger Distribution Control Equipment for Small Portable Electronic Equipment and Electronic Appliances
Asin: B0CB1TTQ43 | Model: WALFRONTvnug5t4yrf | PartNumber: WALFRONTvnug5t4yrf
【Input Voltage】The Input Voltage Is Ac100-240V 50/60Hz, Which Is Very Standard, Practical And Convenient.
【Application】The Power Adapter Is A Power Supply Conversion Device For Small Portable Electronic Equipment And Electronic Appliances..
【Excellent Abs Material】Adopt Abs Material, Anti-Oxidation And -Resistant To Increase Service Life.
【One-Piece Molding】The Surface Is Made After One-Piece Molding Without Burrs, Smooth And Support Fluent Installation.
Features
- STABLE OUTPUT The output voltage is DC36V, the output current is 10A, the structure is stable, and the performance is excellent
- ONE-PIECE MOLDING The surface is made after one-piece molding without burrs, smooth and support fluent installation
- INPUT VOLTAGE The input voltage is AC100-240V 50/60HZ, which is very standard, practical and convenient
- EXCELLENT ABS MATERIAL Adopt ABS material, anti-oxidation and -resistant to increase service life
- APPLICATION The power adapter is a power supply conversion device for small portable electronic equipment and electronic appliances.
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #2
Bisida 10S BMS 36V 30A Li-ion PCB Protection Board with Balance Wire and NTC, Ten Functional protections, Split Ports, for Lithium-ion Battery Pack (10S 36V 30A)
Asin: B0CC1BMDD1 | Model: 10S 36V 30A | PartNumber: 10S 36V 30A | Ean: 0749755110366 | UPC: 749755110366
【Preparation Before Installation】Before Installing The Bms Protective Board, It Is Necessary To Match The Voltage, Capacity, And Internal Resistance (The Voltage Difference Between The Battery Per Section Is Not Higher Than 0.05V, The Difference Between The Internal Resistance Is Not More Than 5Mω, And The Capacity Difference Is Less Than 30Mah). Otherwise The Battery Pack Will Not Be Able To Charge..
【High Quality】Bisida's Bms Utilizes Top Quality (A-Level) Protective Integrated Circuit Ic, From The Solution Of Industry Car Level.Bms Manufactured By High Quality Mos And Ic Imported.Support Oem/Odm Customization, If You Have Special Needs, You Can Contact Customer Service..
【Wiring Method】The Wiring Methods Of Split Ports Of Bms: B- Connection Battery Pack Negative, C- Connection Charging Negative, P- Connection Output Negative. All The Positive Electrodes Are The Total Positive Pole From The Battery Pack..
【Operating Temperature】Bisida's Bms Supports (3.7V) Lithium-Ion Battery Charging And Discharging In Zones From 2.65V To 4.25V, With Low Temperature Protection Up To -20°C And High Temperature Protection Up To 70°C. Different Voltages And Currents Have Different Parameter Details. Confirmation Required. Please Communicate With The Seller To Confirm Accurate Data..
Features
- Multi -Function Protection Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
- Operating Temperature Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20 C and high temperature protection up to 70 C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- Preparation Before Installation Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5M , and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- Wiring Method The wiring methods of Split Ports of BMS: B- connection battery pack negative, C- connection charging negative, P- connection output negative. All the positive electrodes are the total positive pole from the battery pack.
- High Quality Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
- See more on Amazon...
Brand: Bisida | Manufacturer: Bisida
Warranty: 1 Year
See On Amazon #3
DALY Li-ion BMS 10S 36V 30A PCB Protection Board with Seperate Charge and Discharge Protection Port for DIY Electric Tools 18650 Batteries
Asin: B09W9SRPQ7 | Ean: 0768647610777 | UPC: 768647610777
Brand: DALY | Manufacturer: Dongguan Daly Electronics Co., Ltd
Dimensions: 0.63 x 3.15 x 2.40 inches
See On Amazon #4
Battery Board 10S 36V 30A Li?ion Cell Battery BMS PCB Board with Balance Function
Asin: B09MB7ZDBR
Bms Board Wiring Steps-1. Firstly Connect The Batteries In Series;2. Ensure That The Voltage Of Each String Is The Same (The Difference Between The Highest Voltage And The Lowest Voltage Is Preferably Within 0.1V), And The Voltage Range Is Between 3.2-4.0V;3. Firstly Connect The Distributed Cable, Connect According To The Diagram, And Insert The Cable Port Into The Board Port After Checking It Is Correct (First Connect The Battery, Then Insert The Board, The Step Cannot Be Reversed)..
Multi Function-This Board Has Balance Function Which Would Ensure Each Battery Cell Being Fully Charged At Same Time. Support Overcharge , Over-Discharge And Short Circuit ..
Batteries Application-The Board Is For 10 Series Cell Li-Ion Batteries, It Can Be Used For 3.7V Ternary Batteries, Manganese Acid Batteries And Cobalt Acid Batteries..
4. Check Whether The Total Positive Voltage Of The C-Port And P-Port To Battery Is Equal To Total Voltage Of Battery. If Equal, Working; 5. Solder The Battery Negative B- To The Port Marked B- On The Board; 6. Both The Battery Output Negative Electrode And Charging Negative Electrode Of The Same Port Board Are Connected To Port Marked C- On The Board (P- Port Is Floating); 7. Separate Port (Different Port) Board, The Battery Output Negative Pole Is Welded Into Port Marked C- On The Board..
Features
- Widely Application-With temperature control function, safe and reliable. The Board is suitable for electric car, electric power assistant car, skateboard car, inverter, etc.
- 4. Check whether the total positive voltage of the C-port and P-port to battery is equal to total voltage of battery. If equal, working; 5. Solder the battery negative B- to the port marked B- on the board; 6. Both the battery output negative electrode and charging negative electrode of the same port board are connected to port marked C- on the board (P- port is floating); 7. Separate port (different port) board, the battery output negative pole is welded into port marked C- on the board.
- BMS Board Wiring Steps-1. Firstly connect the batteries in series;2. Ensure that the voltage of each string is the same (the difference between the highest voltage and the lowest voltage is preferably within 0.1V), and the voltage range is between 3.2-4.0V;3. Firstly connect the distributed cable, connect according to the diagram, and insert the cable port into the board port after checking it is correct (first connect the battery, then insert the board, the step cannot be reversed).
- Batteries Application-The board is for 10 series cell Li-ion batteries, it can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
- Multi Function-This Board has balance function which would ensure each battery cell being fully charged at same time. Support overcharge , over-discharge and short circuit .
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 2.36 x 7.09 x 6.69 inches | Weight: 0.11 Pounds
See On Amazon #5
10S 30A 36V Battery BMS with Temperature Sensor Charging Port with Diode Separate Port 10S30A 37V BeMuchSafer BMS for DIY Polly Hailong eBike Battery Pack (10S30A 36V Without Switch)
Asin: B0CPWD58RP | Model: 10S30A 36V without Switch | PartNumber: 10S30A 36V without Switch
Max. Continuous Discharge Current: 30A.
Special Function: Charging Port Is Protected By Diode (Charging Port With Diode On The Charging Input Circuit).
Balance Function: Without.
Size: 65*35*11Mm.
Charging And Discharging In The Separate Port.
Max. Continuous Charging Current: 5A.
Features
- BeMuchSafer BMS-B13S023-10S30A 36V
- Max. Continuous Charging Current: 5A
- Max. Continuous Discharge Current: 30A
- Charging and discharging in the separate port
- Balance function: without
- Size: 65*35*11mm
- Special function: Charging port is protected by diode (Charging port with diode on the charging input circuit)
- See more on Amazon...
Brand: Generic | Manufacturer: PURO POWER
Warranty: Warranty for 3 months
See On Amazon #6
Battery Protection Board 10S 36V 30A Fast Charging for Li ion Cell
Asin: B0CRBMY49L | Model: Fafeicygcvs02tdhu | PartNumber: Fafeicygcvs02tdhu
[Complete Protection]Against Over , Over Discharge, And Short Circuit.
[Suitable For 10S Li-Ion Cell] Designed Specifically For 10 Series Li-Ion Cells.
[] Ensure Long-Lasting Performance And Reliability.
[Tested For Quality] Undergone Thorough Load And Aging Tests For Assurance.
Features
- [Fast Charging]integrated circuit for quick and safe charging
- [Tested for Quality] Undergone thorough load and aging tests for assurance
- [Complete Protection]against over , over discharge, and short circuit
- [] Ensure long-lasting performance and reliability
- [Suitable for 10s Li-ion Cell] Designed specifically for 10 series Li-ion cells
- See more on Amazon...
Brand: Fafeicy | Manufacturer: Fafeicy
Dimensions: 0.39 x 2.76 x 1.57 inches
See On Amazon #7
10S 36V 30A Lithium Battery Board Fast Charging for 10 Series Li - ion Cell
Asin: B0CRBLYPXG | Model: Fafeicy4fe5vquwa8 | PartNumber: Fafeicy4fe5vquwa8
[10 Series Li-Ion Cell] Specifically Designed For 10 Series Li-Ion Cell, Providing Reliable Protection Against Overcharge, Overdischarge, And Short Circuit..
[ And ] Made Withintegrated Circuit, This Lithium Battery Protection Board Ensures Fast And Safe Charging..
[Load And Aging Tested] Each Product Has Undergone A Rigorous Load And Aging Test To Ensure Quality And Reliability..
[Versatile Compatibility] Compatible With 3.7V Ternary Cell, Lithium Manganate Cell, And Lithium Cobalt Cell, Offering Versatility For Various Battery Types..
Features
- [Fast Charging] The advanced technology of this protection board allows for quick charging without compromising safety.
- [Versatile Compatibility] Compatible with 3.7V ternary cell, lithium manganate cell, and lithium cobalt cell, offering versatility for various battery types.
- [10 Series Li-ion Cell] Specifically designed for 10 series Li-ion cell, providing reliable protection against overcharge, overdischarge, and short circuit.
- [Load and Aging Tested] Each product has undergone a rigorous load and aging test to ensure quality and reliability.
- [ and ] Made withintegrated circuit, this lithium battery protection board ensures fast and safe charging.
- See more on Amazon...
Brand: Fafeicy | Manufacturer: Fafeicy
See On Amazon #8
Delaman 10S 36V 30A 18650 Lithium Battery Protection Board BMS PCB Board Li-ion Charger Protection Module with Balance Function
Asin: B0BQRBLNKH | Model: GHIU0257 | PartNumber: GHIU0257
Support Overcharge Protection, Over‑Discharge Protection And Short Circuit Protection..
Suitable For Several Kinds Of Batteries, Safe, Reliable And Easy To Use..
Lithium Battery Protection Board Is Suitable For Electric Car, Electric Power Assistant Car, Skateboard Car, Inverter, Etc.
It Has Balance Function Which Would Ensure Each Battery Cell Being Fully Charged At Same Time..
Features
- The protection board is for 10 series cell Li ion batteries, it can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
- It has balance function which would ensure each battery cell being fully charged at same time.
- Support overcharge protection, over discharge protection and short circuit protection.
- Lithium battery protection board is suitable for electric car, electric power assistant car, skateboard car, inverter, etc
- Suitable for several kinds of batteries, safe, reliable and easy to use.
- See more on Amazon...
Brand: Delaman | Manufacturer: Delaman
Dimensions: 2.36 x 7.09 x 6.69 inches
See On Amazon #9
Lithium Battery Board with Balance Function, 10S 36V 30A Li ion Cell Battery BMS PCB Board with Cable
Asin: B09Z4QVSX8
With Balance Function: It Has Balance Function Which Would Ensure Each Battery Cell Being Fully Charged At Same Time. The Overdischarge Voltage Is 2.6V. The Overcharge Voltage Is 4.25V..
Function: Support Overcharge , Over-Discharge And Short Circuit . With Temperature Control Function, And Reliable.
Application For: The Board Is For 10 Series Cell Li-Ion Batteries, It Can Be Used For 3.7V Ternary Batteries, Manganese Acid Batteries And Cobalt Acid Batteries..
Note: Please Note That The New Type And Old Type Of This Product Will Be Sent Randomly, And Make Sure You Will Not Mind Before Ordering..
Features
- SUITABLE FOR: This lithium battery board is suitable for electric car, electric power assistant car, skateboard car, inverter, etc
- NOTE: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
- WITH BALANCE FUNCTION: It has balance function which would ensure each battery cell being fully charged at same time. The overdischarge voltage is 2.6v. The overcharge voltage is 4.25v.
- APPLICATION FOR: The board is for 10 series cell Li-ion batteries, it can be used for 3.7V ternary batteries, manganese acid batteries and cobalt acid batteries.
- FUNCTION: Support overcharge , over-discharge and short circuit . With temperature control function, and reliable
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 2.36 x 7.09 x 6.69 inches | Weight: 0.09 Pounds
See On Amazon
Looking For Something Else?
Search