Class A Customs | RV Camper Trailer Clear Skylight 18 x 26 OD / 14 x 22 ID - Includes Putty and Screws | CESL-100-PS
Asin: B08D9VVH62 | Model: 1826-ESK-CL | PartNumber: 1826-ESK-CL | Ean: 0782731950808 | UPC: 782731950808
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Dome Dimensions (This Is Roughly The Size Hole You Will Need In Your Unit) 14 1/8" X 22 1/8" (4 1/4" Height).
**There Will Be Small Marks In Middle Of Skylight From Manufacturing Process (See Photos), This Is Not A Defect Or Crack And Does Not Effect Skylight, All Skylights Will Have This Mark.**.
Mounting Hardware Included 88" Putty Tape - 28 Pan Head Screws #8 X 1" - No Garnish Ring.
Color Clear.
Features
- MOUNTING FLANGE DIMENSIONS 17 7/8" X 26" Pre-drilled For Easy Mounting
- COLOR Clear
- DOME DIMENSIONS (this is roughly the size hole you will need in your unit) 14 1/8 X 22 1/8 (4 1/4 height)
- MOUNTING HARDWARE INCLUDED 88 Putty tape - 28 Pan Head Screws #8 x 1 - NO GARNISH RING
- **There will be small marks in middle of skylight from manufacturing process (See Photos), this is not a defect or crack and does not effect skylight, all skylights will have this mark.**
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon Similar To Class A Customs RV Camper
#1
Class A Customs | 2 Pack | 27.5" Black Metal Table Leg, with 2 Black Surface Mount Plastic Bases (2 Black Legs, 4 Black Surface Mount Bases)
Asin: B08562XH7G | Ean: 7426933331951
Includes 2 Bases Per Leg - Plastic Surface Mount Base - Does Not Require Drilling A Hole In Floor To Install - Outer Diameter 6.5".
Leg Length: 2" Diameter X 27.5" Long -- Overall Leg Length With Bases Attached: 28.25" Long.
Please Note Due To Manufacturing Process Sharp Edges May Be Present, Use Caution When Handling..
Rv Table Legs - These Are Not For Use As Bed Legs Or Supports, Bases Will Not Support Weight..
Features
- Two (2 Total) RV Table Legs - Straight Non-folding - Black Poweder Coated with Plastic Bases
- RV Table Legs - these are not for use as bed legs or supports, bases will not support weight.
- Includes 2 bases per leg - Plastic Surface Mount Base - does not require drilling a hole in floor to install - Outer Diameter 6.5
- Please note due to manufacturing process sharp edges may be present, use caution when handling.
- Leg Length: 2 Diameter x 27.5 Long -- Overall Leg Length With Bases Attached: 28.25 Long
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 28.25 x 6.50 x 6.50 inches | Weight: 13.00 Pounds
See On Amazon #2
Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000
Asin: B007MSLA84 | Model: T-3000-1 | PartNumber: T-3000-1
Tank Built-In Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads.: (Two) 1.5" Balloon Style Threaded Female Npt Standard - Fitting Will Be Closed, To Use Remove Inner Membrane With Razor Knife (Two) .5" Threaded Female Npt Standard - Open Fitting, Unsealed.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 34.5” Longest Length (Not Including Fittings) X 12” X 17.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 34.5 Longest Length (not including fittings) x 12 x 17.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5 Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5 Threaded Female NPT Standard - open fitting, unsealed
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 12.00 x 34.50 x 17.50 inches | Weight: 18.00 Pounds
Warranty: Manufacturer warranty covers manufacturer defect on manufacturer installed fittings and tank. Using this tank for any purpose other than fresh or gray water storage will void any/all warranty. Do Not use tanks for sewage or fuel.
See On Amazon #3
Class A Customs | One (1) RV Fresh and Gray Water use 35 Gallon Tank | T-3500 | 38.75" X 12" X 17.375" | Camper and Concession Trailer/Food Truck
Asin: B0BZDQ5TLF | Model: T-3500 | PartNumber: T-3500
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Perfect For Concession And Food Vendor Trucks And Trailers.
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 38.75” Longest Length (Not Including Fittings) X 12” X 17.375” Average Thickness 7/32” +/- (+/- .25" On Each Measurement).
Features
- 35 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 38.75 Longest Length (not including fittings) x 12 x 17.375 Average thickness 7/32 +/- (+/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- Perfect for Concession and food vendor trucks and trailers
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 12.00 x 38.75 x 17.38 inches | Weight: 19.00 Pounds
See On Amazon #4
Class A Customs | RV ATV Cycle Truck Cargo Work Trailer Half-Moon Side Air Vents | Two Pack | Black
Asin: B0887D1XTN | Ean: 7426933332927
Allows Air Circulation In The Trailer.
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #5
Class A Customs | T-6500 | 65 Gallon RV Fresh Water Holding Tank
Asin: B07XTNP3S2 | Ean: 7426933331333
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 44.5” Longest Length (Not Including Fittings) X 17.5” X 19.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 65 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 44.5 Longest Length (not including fittings) x 17.5 x 19.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 17.50 x 44.50 x 19.50 inches
See On Amazon #6
Class A Customs | Four (4) Pack of White Locking Fold Down Camper Latch and Catch
Asin: B08RZCV8SG | Ean: 0753569688225 | UPC: 753569688225
Mounting Plate Measures 2" X 1 7/8" - Catch Measures 1 1/4" X 7/8".
Mounting Hardware Is *Not* Included.
Locking Style Allows For Use With A Padlock (Padlock *Not* Included).
Constructed Of Steel, Powder Coated White For Corrosion Resistance.
Features
- Locking camper latches insure your pop up camper or snowmobile trailer is secure
- Constructed of steel, powder coated white for corrosion resistance
- Mounting plate measures 2 x 1 7/8 - Catch measures 1 1/4 x 7/8
- Locking style allows for use with a padlock (padlock *NOT* included)
- Mounting hardware is *NOT* included
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #7
Class A Customs | 2 Pack | Heng's 27.5" RV Chrome Straight Table Leg Kit (2 Legs, 4 Surface Bases)
Asin: B08D9SBV6F | Ean: 0782731950761 | UPC: 782731950761
4 Surface Bases - No Hole In Floor Needed.
Bases Are Not Chrome Finish.
Ends Of The Leg Are "Fluted" Or Crimped To Ensure A Tight Fit.
Features
- Table Leg 27.5 x 2" diameter
- Ends of the leg are fluted or crimped to ensure a tight fit
- 4 Surface Bases - no hole in floor needed
- Bases are not chrome finish
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #8
Class A Customs | T-4600 | One (1) RV Fresh Water 46 Gallon Tank, Grey Water
Asin: B007MSLP7A | Model: T-4600 | PartNumber: T-4600
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 42” Longest Length (Not Including Fittings) X 14” X 18” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 46 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 42 Longest Length (not including fittings) x 14 x 18 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 14.00 x 42.00 x 18.00 inches | Weight: 49.00 pounds
See On Amazon #9
Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank | UM-3000
Asin: B08DRLSFJF | Model: UM-3000 | PartNumber: UM-3000 | Ean: 0782731951249 | UPC: 782731951249
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 48” Longest Length (Not Including Fittings) X 8.5” X 20.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 48 Longest Length (not including fittings) x 8.5 x 20.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 9.00 x 48.00 x 21.00 inches | Weight: 18.00 Pounds
See On Amazon #10
Class A Customs | 25" X 17" X 5" Stainless Steel Double Bowl Sink | 300 Series Stainless Steel | RV Camper Motor Home Sink | Concession Sink
Asin: B08Z5QXW2X | Ean: 0753569791567 | UPC: 753569791567
Flange Width: 1" Around Front And Sides / 3 1/8" On The Ledgeback Faucet Side.
Drain Openings: 2".
Inner Dimensions Of Bowls: 13.25" X 11" X 5.25" Deep.
Cut-Out Dimensions: 24" X 16.5".
Features
- OVERALL OUTER DIMENSIONS: 25" X 17.5" X 5.25 Deep
- CUT-OUT DIMENSIONS: 24 X 16.5
- FLANGE WIDTH: 1 Around Front and Sides / 3 1/8 on the Ledgeback Faucet Side
- INNER DIMENSIONS OF BOWLS: 13.25 X 11 X 5.25 Deep
- DRAIN OPENINGS: 2
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 5.25 x 25.00 x 17.50 Inches | Weight: 8.00 Pounds
See On Amazon #11
Class A Customs | UM-2000 | One (1) UnderMount 20 Gallon RV Fresh and Gray Water Holding Tank RV Concession
Asin: B07LBB4RTF | Model: UM-2000 | PartNumber: UM-2000 | Ean: 7426933333771
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 48” Longest Length (Not Including Fittings) X 8.5” Height X 13” Width - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 48 Longest Length (not including fittings) x 8.5 height x 13 width - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: Class A Customs | Manufacturer: classAcustoms.com
Dimensions: 11.75 x 32.50 x 11.75 inches | Weight: 30.00 Pounds
See On Amazon #12
Class A Customs | T-2000 | One (1) RV Fresh Water 20 Gallon Tank, Grey Water
Asin: B07659973Z | Model: T-2000 | PartNumber: T-2000 | Ean: 0671065514278 | UPC: 671065514278
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 32.5” Longest Length (Not Including Fittings) X 11.75” X 11.75” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 32.5 Longest Length (not including fittings) x 11.75 x 11.75 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 11.75 x 32.50 x 11.75 inches | Weight: 30.00 Pounds
See On Amazon #13
Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank
Asin: B07XTNGY88 | Ean: 7426933331340
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 50.5” Longest Length (Not Including Fittings) X 17.5” X 19.5” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 75 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 50.5 Longest Length (not including fittings) x 17.5 x 19.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #14
Class A Customs | T-1000 | One (1) RV Fresh Water 10 Gallon Tank, Grey Water
Asin: B007MSDYFQ
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 19” Longest Length (Not Including Fittings) X 9” X 14” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 19 Longest Length (not including fittings) x 9 x 14 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Weight: 10.00 pounds
Warranty: Manufacturer warranty covers manufacturer defect on manufacturer installed fittings and tank. Using this tank for any purpose other than fresh or gray water storage will void any/all warranty. Do Not use tanks for sewage or fuel.
See On Amazon #15
Class A Customs | 2 Pack Long 1,000 lb. Capacity RV Cargo Trailer Telescoping Swing Down Jacks 16" - 22.5" Extended 1319410-1622-2PK
Asin: B07L458T72 | Ean: 7426933331371
No Ratchet Bar - No Mounting Hardware You Will Need To Provide - Can Be Bolted Or Welded To Frame.
Best Used With Pop-Up Campers, Utility Trailers, Cargo Trailers, And Motorcycle Trailers..
Retracted Length 16" Fully Extended Length 22 1/2" Telescoping Travel 6 1/2" Base Plate 3 3/8” W X 4" L Mounting Area 1 7/8” W X 4" L.
Folds Down And Telescopes For Longer Distances - Positive Ratchet Locking Holds Load Without Slipping.
Features
- 2 Pack Long Extended Reach Swing Down Jacks - 1000 lb Capacity Per Jack - Spring Loaded - Black Powder Coated to Resist Rust
- Folds down and telescopes for longer distances - Positive ratchet locking holds load without slipping
- NO Ratchet bar - No Mounting Hardware you will need to provide - Can be Bolted or Welded to Frame
- Retracted Length 16 Fully Extended Length 22 1/2 Telescoping Travel 6 1/2 Base Plate 3 3/8 W x 4 L Mounting Area 1 7/8 W x 4 L
- Best used with pop-up campers, utility trailers, cargo trailers, and motorcycle trailers.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 4.00 x 12.00 x 12.00 inches | Weight: 17.00 pounds
See On Amazon #16
Class A Customs | T-4000 | One (1) RV Fresh Water 40 Gallon Tank, Grey Water
Asin: B01B898H9C | Model: T-4000 | PartNumber: T-4000 | Ean: 0808890308967 | UPC: 808890308967
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 39 1/2” Longest Length (Not Including Fittings) X 13” X 18” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 39 1/2 Longest Length (not including fittings) x 13 x 18 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: Class A Customs | Manufacturer: Class A Customs
Dimensions: 14.00 x 42.00 x 18.00 inches | Weight: 49.00 pounds
Warranty: Manufacturer warranty covers manufacturer defect on manufacturer installed fittings and tank. Using this tank for any purpose other than fresh or gray water storage will void any/all warranty. Do not use tanks for sewage or fuel.
See On Amazon #17
Class A Customs | 13 X 15 Stainless Steel Sink | 300 Series Stainless Steel | RV Camper Motor Home Sink | Concession Sink
Asin: B08Z4JQ5FZ | Ean: 0753569687341 | UPC: 753569687341
Flange Width: 1" Around Entire Edge.
Drain Opening: 2".
Inner Dimensions Of Bowl: 13.25" X 11" X 5.25" Deep.
Cut-Out Dimensions: 13.5" X 11.25".
Features
- OVERALL OUTER DIMENSIONS: 15.25" X 13" X 5.25 Deep
- CUT-OUT DIMENSIONS: 13.5 X 11.25
- FLANGE WIDTH: 1 Around Entire Edge
- INNER DIMENSIONS OF BOWL: 13.25 X 11 X 5.25 Deep
- DRAIN OPENING: 2
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 5.25 x 15.25 x 13.00 inches | Weight: 5.00 pounds
See On Amazon #18
Class A Customs | RV ATV Cycle Truck Cargo Work Trailer Side Air Vents | Four Pack | Black | High Tech/Arrow Design
Asin: B088MFRZ1J | Ean: 7426933332996
Measurements Arrow Piece 8.5” Widest Point X 7.8125” Tallest Point Measurements Inner Circle Piece 3” Diameter Insert X 4.125” Face Plate.
Design Allows For Air To Be Scooped Inside The Trailer And Easily Circulate While Not Allowing Water In. For Maximum Air Flow Additional Vents Can Be Used To Dramatically Increase The Amount Of Airflow..
Material: Plastic Color: Black Quantity: 4 Vents Total.
Features
- New High-Tech Arrow Shaped Plastic Side Wall Air Vents for cargo trailer ventilation
- MATERIAL: Plastic COLOR: Black QUANTITY: 4 Vents Total
- MEASUREMENTS ARROW PIECE 8.5 Widest point x 7.8125 Tallest point MEASUREMENTS INNER CIRCLE PIECE 3 diameter insert x 4.125 face plate
- Design allows for air to be scooped inside the trailer and easily circulate while not allowing water in. For maximum air flow additional vents can be used to dramatically increase the amount of airflow.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #19
Class A Customs | T-10000 | One (1) RV Fresh Water 100 Gallon Tank, Grey Water | Ribbed for Extra Support
Asin: B086672P6N | Ean: 7426933332507
Tank Built-In Fittings: (Six) 1.5" Female Npt Fitting - Fitting Is Sealed And Water-Tight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur – Use Plastic Threaded Fittings, Metal Threads May Damage Tank Fittings.
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 50” Longest Length (Not Including Fittings) X 18” X 26” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 100 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 50 Longest Length (not including fittings) x 18 x 26 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (SIX) 1.5 Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #20
Class A Customs | RV ATV Cycle Truck Cargo Work Trailer Half-Moon Side Air Vents | Two Pack | White
Asin: B08877PMDY | Ean: 7426933332941
Allows Air Circulation In The Trailer.
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon
Looking For Something Else?
Search