Arducam Mini 12.3MP HQ Camera Compatible with Nvidia Jetson Nano and Xavier NX, 1/2.3 Inch IMX477 Camera Module with M12 Mount Lens
Asin: B08F743RGG
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.High Quality Camera: This Camera Adopts 1/2.3″ 12.3 Megapixel Imx477 Sensor For Sharp Image, Max. Still Resolution 4056(H) X 3040(V)..
Note：This Camera Is Compatible With Jetson Developer Kit, And It Does Not Guarantee To Support Other Third-Party Boards..
Lens Spec: Low Distortion M12 Mount, Efl: 3.9Mm, Fov(H): 80°, F/No: F2.8.
Mini And Lightweight: 24Mm X 25Mm Imx477 Camera Board, As Mini As Raspberry Pi V2 Module Size, Mounted A M12 Lens, Perfect For The Camera Applications Where High Resolution Is Required, But Size And Weight Are Limited, Such As Model Airplane..
Features
- Mini and Lightweight: 24mm x 25mm IMX477 camera board, as mini as Raspberry Pi V2 module size, mounted an M12 lens, perfect for the camera applications where high resolution is required, but size and weight are limited, such as a model airplane.
- Mini and Lightweight: 24mm x 25mm IMX477 camera board, as mini as Raspberry Pi V2 module size, mounted a M12 lens, perfect for the camera applications where high resolution is required, but size and weight are limited, such as model airplane.
- High Quality Camera: This camera adopts 1/2.3 12.3 Megapixel IMX477 sensor for sharp image, max. still resolution 4056(H) x 3040(V).
- Lens Spec: Low distortion M12 Mount, EFL: 3.9mm, FoV(H): 80 , F/NO: F2.8
- Note This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon Similar To Arducam Mini 12.3MP HQ Camera
#1
Arducam for Raspberry Pi Camera Module 3 Wide, 120 IMX708 Manual Focus Pi Camera V3 with M12 Lens, 15cm 15-22 Pin FFC Cable
Asin: B0BZR6XL3Y
Wide-Angle M12 Lens: The V3 Camera Is Equipped With A 120° (Hfov) Wide-Angle M12 Lens, Allowing For Deeper Depth Of Field And Capturing More Image Detail While Effectively Reducing Bokeh..
What You Will Get: This Camera Module Comes With A 15Cm 15-22Pin Raspberry Pi Camera Cable And Is Equipped With An M12 Lens For Manual Focus Applications..
Easy Use: This Arducam For Raspberry Pi 5 Camera Fully Supports Libcamera And Picamera2, And Uses Csi-2 Serial Data Output With 2-Wire Serial Communication For Seamless Integration..
Hdr Image Sensor: This Arducam For Raspberry Camera Is Based On A Back-Illuminated Stacked Cmos 12-Megapixel High-Resolution Image Sensor (Imx708), Which Can Output Up To 3 Megapixels In Hdr Mode On The Raspberry Pi. The Maximum Resolution Is 4608(H) × 2592(V)..
Features
- Wide Compatibility: Compatible with all Raspberry Pi boards, including Raspberry Pi 5, Raspberry Pi 4B, Raspberry Pi 3B, and Raspberry Pi Zero W/2 W.
- HDR Image Sensor: This Arducam for Raspberry camera is based on a back-illuminated stacked CMOS 12-megapixel high-resolution image sensor (IMX708), which can output up to 3 megapixels in HDR mode on the Raspberry Pi. The maximum resolution is 4608(H) 2592(V).
- Wide-angle M12 Lens: The V3 camera is equipped with a 120 (HFOV) wide-angle M12 lens, allowing for deeper depth of field and capturing more image detail while effectively reducing bokeh.
- Easy Use: This Arducam for Raspberry Pi 5 camera fully supports Libcamera and Picamera2, and uses CSI-2 serial data output with 2-wire serial communication for seamless integration.
- What you will get: This camera module comes with a 15cm 15-22pin Raspberry Pi camera cable and is equipped with an M12 Lens for manual focus applications.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #2
Arducam Mini Module Camera Shield with OV2640 2 Megapixels Lens Compatible with Arduino UNO Mega2560 Board and Raspberry Pi Pico
Asin: B012UXNDOY | Model: B0067 | PartNumber: B0067 | Ean: 0714119484377, 8896255253313 | UPC: 714119484377
M12 Mount Or Cs Mount Lens Holder With Changeable Lens Options.
I2c Interface For The Sensor Configuration，Spi Interface For Camera Commands And Data Stream.
2 Megapixels Image Sensor Ov2640, Build-In 650Nm Ir Block Filter, Visible Light Only.
Features
- Compatible with Arduino, Raspberry Pi Pico, MCU, Raspberry Pi, ARM, DSP, FPGA platforms
- 2 megapixels image sensor OV2640, build-in 650nm IR block filter, visible light only
- M12 mount or CS mount lens holder with changeable lens options
- I2C interface for the sensor configuration SPI interface for camera commands and data stream
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #3
Arducam 64MP Ultra High-Resolution Autofocus Camera Module for Raspberry Pi, Compatible with Raspberry Pi 5/4B/3B+/3B/2B/A+/Zero/W/Zero WH
Asin: B0B63PCZM9
【Autofocus And Manual Focus】Up To 10X Digital Zoom With Built-In Autofocus Motor For Fast And Infinite Focus No Matter Where You Place The Camera. Manual Focus Can Also Be Controlled Through Software..
【Widely Used With Other Devices】You Can Let Your Camera Pan And Tilt With A Pan-Tilt Platform (Asin: B08pk9n9t4); You Can Achieve Remote Shooting Control With The Camera Extension Cable(Asin: B09tsdz48f); You Can Fix It On A Tripod(Asin: B09tkyxzfg.) As The Image Shown..
【Technical Support】If There Is Any Issue With The Camera, Feel Free To Contact Arducam, We Will Provide Technical Support For You..
【Easily Accessible】Provides A Pre-Compiled Program (Not Open Source), Even For Newbies Who Use Raspberry Pi For The First Time, You Can Easily Access The Camera. Plug & Play. For 64Mp Cameras With Abs Cases, Please Search For B0bl987t5y.
【All Raspberry Pi Compatible】Same Size As Raspberry Pi Camera Module 3/V2/V1, Mipi Csi-2 Interface, Compatible With All Raspberry Pi Motherboards With Libcamera App(Bullseye Only)..
Features
- 64MP Ultra HD Arducam for Raspberry Pi Camera With the 64MP ultra-high resolution camera, your Raspberry Pi can capture still images with amazing resolution (9152 x 6944) just like a flagship phone.
- All Raspberry Pi Compatible Same size as Raspberry Pi Camera Module 3/V2/V1, MIPI CSI-2 interface, compatible with all Raspberry Pi motherboards with libcamera app(Bullseye Only).
- Autofocus and Manual Focus Up to 10x digital zoom with built-in autofocus motor for fast and infinite focus no matter where you place the camera. Manual focus can also be controlled through software.
- Easily accessible Provides a pre-compiled program (not open source), even for newbies who use Raspberry Pi for the first time, you can easily access the camera. Plug & play. For 64mp cameras with ABS cases, please search for B0BL987T5Y
- Widely used with other devices You can let your camera pan and tilt with a Pan-Tilt Platform (ASIN: B08PK9N9T4); you can achieve remote shooting control with the camera extension cable(ASIN: B09TSDZ48F); You can fix it on a tripod(ASIN: B09TKYXZFG.) as the image shown.
- Technical Support If there is any issue with the camera, feel free to contact Arducam, we will provide technical support for you.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 months
See On Amazon #4
Arducam 5MP Wide Angle USB Camera for Computer, 1/4" CMOS OV5648 Mini UVC USB2.0 Video Webcam with Microphone, with 3.3ft/1m Cable
Asin: B0972KK7BC
Frame Rates: Mjpg 15Fps@2592*1944/2048*1536/1600*1200; 30Fps@1920*1080/1280*960/1280*720/1024*768/800*600/640*360/640*480; Yuy2 2Fps@2592*1944/2048*1536; 5Fps@1920*1080; 7.5Fps@1600*1200/1280*960; 10Fps@1280*720/1024*768; 20Fps@800*600; 30Fps@640*360/640*480.
Applications: Highly Recommended For The Video Surveillance System, Live Streaming, Videoconference, Dashcam, And Other Vision Applications..
Plug&Play: Uvc-Compliant, Just Connect The Camera To Pc Computer, Laptop, Android Device Or Raspberry Pi With The Usb Cable Without Extra Drivers To Be Installed..
Wide Angle: Assembled With A 95-Degree Horizontal View Angle M12 Lens With Ir-Cut Filter, Which Provides A Much Wider Field Of View Compared To Other Lenses..
Features
- Ultra HD Resolution: This camera adopts the 5MP OV5648 Color COMS sensor for sharp images and accurate color reproduction.
- Wide Angle: Assembled with a 95-degree horizontal view angle M12 lens with IR-cut filter, which provides a much wider Field of View compared to other lenses.
- Frame Rates: MJPG 15fps@2592*1944/2048*1536/1600*1200; 30fps@1920*1080/1280*960/1280*720/1024*768/800*600/640*360/640*480; YUY2 2fps@2592*1944/2048*1536; 5fps@1920*1080; 7.5fps@1600*1200/1280*960; 10fps@1280*720/1024*768; 20fps@800*600; 30fps@640*360/640*480
- Plug&Play: UVC-compliant, just connect the camera to PC computer, laptop, Android device or Raspberry Pi with the USB cable without extra drivers to be installed.
- Applications: Highly recommended for the video surveillance system, live streaming, videoconference, dashcam, and other vision applications.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 Months
See On Amazon #5
Arducam 4K 8MP IMX219 Autofocus USB Camera Module with Metal Case, 1080P Mini UVC USB2.0 Video Webcam with Microphone, 3.3ft/1m Cable for Computer, Laptop, Raspberry Pi, Jetson Nano
Asin: B09BR1RNSN | Model: B029201 | PartNumber: B029201
Capture Video With Audio: Built With Microphone, Capture Video With Audio. Frame Rates: Mjpg 15Fps@3264 X 2448, 30Fps@1080P/720P; Yuy2 30Fps@640 X 480/800 X 600;.
Applications: Assemble With A Metal Case And Rotatable Bracket, This Mini-Sized Camera Is Highly Recommended For A Home Surveillance System, Monitoring 3D Printer, And You Can Easily Put It On The Desk Or Any Flat Surface, Or Mount It On The Wall Or Tripod Mount..
Plug & Play: Ready To Use, Uvc-Compliant, Just Connect The Camera To Pc, Laptop, Android Device, Or Raspberry Pi With The Included Usb Cable Without Extra Drivers To Be Installed..
Autofocus: Shoot Objects At Millimeter Level And In The Distance On The Same Camera, Automatically Controlled Without Lens Adjustment Tool, Closer And Easier Than The Fixed Focus Camera..
Features
- More than HD: This camera adopts an 8MP IMX219 sensor for sharp image and accurate color reproduction, Max. still resolution 3264H x 2448V.
- Autofocus: Shoot objects at millimeter level and in the distance on the same camera, automatically controlled without lens adjustment tool, closer and easier than the fixed focus camera.
- Capture Video with Audio: Built with microphone, capture video with audio. Frame Rates: MJPG 15fps@3264 x 2448, 30fps@1080P/720P; YUY2 30fps@640 x 480/800 x 600;
- Plug & Play: Ready to use, UVC-compliant, just connect the camera to PC, laptop, Android device, or Raspberry Pi with the included USB cable without extra drivers to be installed.
- Applications: Assemble with a metal case and rotatable bracket, this mini-sized camera is highly recommended for a home surveillance system, monitoring 3D Printer, and you can easily put it on the desk or any flat surface, or mount it on the wall or tripod mount.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #6
Arducam 16MP Autofocus Camera Module for Raspberry Pi with ABS Case, IMX519 16 Megapixel High Resolution Autofocus Camera for All Raspberry Pi Models
Asin: B09STL7S88
【Crisper Images/Videos】The 16 Megapixel Camera Can Capture 1080P Full Hd Video At Up To 30 Frames Per Second And 720P Hd Video At Up To 60 Frames Per Second, And Also Provides An Effective 80-Degree Field Of View..
【Package Contents】The Package Includes A Camera Board With Imx519 Sensor And An Autofocus Lens, An Fpc Cable And A Camera Housing. Please Search Asin: B09tsdz48f For The Camera Extension Kit, Which Allows You To Place Cameras Up To 15 Meters Away For Shooting. Asin: B09tsgmcm9 Is A Multi-Camera Solution That Enables 4 Cameras To Appear In The Same Frame. If There Is Any Issue With The Camera, Feel Free To Contact Arducam, We Will Provide Technical Support For You..
Note：This Camera Is Compatible With Jetson Developer Kit, And It Does Not Guarantee To Support Other Third-Party Boards..
【Camera Module V3/V2/V1 Size】The Autofocus Camera Module Has The Same Size As The Raspberry Pi Camera Module V3/V2/V1, The Package Comes With Plastic Housing, Also Suitable For V1 And V2 Boards. And The Housing Also Has An Integrated Tripod Mounting Hole, Which You Can Install On Any 1/4 Hole Distance Tripod..
【Imx519 Af Camera Moudle】Built-In Autofocus Motor Allows You To Get Focus Quickly So That You Can Focus To Infinity No Matter Where You Place Your Camera. The Minimum Focus Distance Is 10Cm, And The Longest Allowed Exposure Time Is 200 Seconds..
Features
- 16MP for All Pis The Arducam designed for Raspberry Pi camera features a 16MP IMX519 sensor with a pixel resolution of 4656 x 3496, twice as high as the v2 camera and 40% higher than the HQ camera; Compatible with any Raspberry Pi board with a MIPI/CSI interface; Unlike the native Pi camera, this camera requires some simple script configuration before use, and does not support raspbian.
- IMX519 AF Camera Moudle Built-in autofocus motor allows you to get focus quickly so that you can focus to infinity no matter where you place your camera. The minimum focus distance is 10cm, and the longest allowed exposure time is 200 seconds.
- Crisper Images/Videos The 16 megapixel camera can capture 1080p Full HD video at up to 30 frames per second and 720p HD video at up to 60 frames per second, and also provides an effective 80-degree field of view.
- Camera Module V3/V2/V1 Size The autofocus camera module has the same size as the raspberry pi camera module V3/V2/V1, the package comes with plastic housing, also suitable for V1 and V2 boards. And the housing also has an integrated tripod mounting hole, which you can install on any 1/4 hole distance tripod.
- Package Contents The package includes a camera board with IMX519 sensor and an autofocus lens, an FPC cable and a camera housing. Please search ASIN: B09TSDZ48F for the camera extension kit, which allows you to place cameras up to 15 meters away for shooting. ASIN: B09TSGMCM9 is a multi-camera solution that enables 4 cameras to appear in the same frame. If there is any issue with the camera, feel free to contact Arducam, we will provide technical support for you.
- Note This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 Months
See On Amazon #7
Arducam 1080P Low Light WDR Ultra Wide Angle USB Camera Module for Computer, 2MP CMOS IMX291 160 Degree Fisheye Mini UVC USB2.0 Webcam Board with Microphone, 3.3ft Cable for Windows Linux Mac OS
Asin: B07ZS75KZR
Capture Video With Audio: High Frame Rates, H.264 30Fps@1920X1080; Mjpg 30Fps@1920X1080; Yuy2 30Fps@640X 480; Audio, Single Microphone..
Applications: This Tiny Camera Board Can Be Installed In The Most Hidden And Narrow Position For A Home Video Surveillance System, Day&Night Low Light Vision Security Camera System, Dashcam Or Other Machine Vision Application..
Plug&Play: Uvc-Compliant, Support Windows Xp/7/8/10, Linux, Android, And Mac Os, Just Connect The Camera To Pc, Laptop Or Raspberry Pi With The Usb Cable Without Extra Drivers To Be Installed..
Ultra Wide Angle: High Quality 160 Degree Super Wide View Angle (Diagonal) M12 Lens With Ir Filter..
Features
- HD Resolution and Low Light: This camera adopts the 2MP 1/2.8 IMX291 Color COMS sensor with an 80DB wide dynamic range, can capture the minimum illumination 0.001Lux.
- Ultra Wide Angle: High quality 160 degree super wide view angle (diagonal) M12 lens with IR filter.
- Capture Video with Audio: High frame rates, H.264 30fps@1920x1080; MJPG 30fps@1920x1080; YUY2 30fps@640x 480; Audio, single microphone.
- Plug&Play: UVC-compliant, support Windows XP/7/8/10, Linux, Android, and Mac OS, just connect the camera to PC, laptop or Raspberry Pi with the USB cable without extra drivers to be installed.
- Applications: this tiny camera board can be installed in the most hidden and narrow position for a home video surveillance system, day&night low light vision security camera system, dashcam or other machine vision application.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #8
Arducam ToF Camera, 0.43MP Color Rolling Shutter Camera Module with Case for Raspberry Pi and Nvidia Jetson Nano/NX, Depth Sensing Solution ToF Tech Camera
Asin: B0BRB12W7Y
Outdoor Usable: No Worry Of Interference From Ambient Light..
Affordable Decency: 3D Imaging With Primed Point Clouds At An Unexpectedly Low Cost..
Any Mv Library Works: 3 Languages Applicable. C, C++ Or Python..
Large Working Range: 2M/4M Optional, And A 10-Meter Broader Coverage With Our Cable Extension Kit..
Features
- Pixel-level accuracy: powerful depth/distance measurement.
- Large working range: 2m/4m optional, and a 10-meter broader coverage with our cable extension kit.
- Outdoor usable: No worry of interference from ambient light.
- Any MV library works: 3 languages applicable. C, C++ or Python.
- Affordable decency: 3D imaging with primed point clouds at an unexpectedly low cost.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 Months
See On Amazon #9
Arducam IMX219 8MP Autofocus USB Camera Module, 3280(H) 2464(V)@30fps with Single Microphone for Linux, Windows, and Mac OS
Asin: B0BWS4R1BH
Uvc Compliant: Otg Supported Just Plug The Usb Cable Into Your Pc’S Usb Port, And Running The Software Can Capture The High-Level Video And Continuous Recording, No Driver Needed..
Flexible Application: Lightweight And Compact Size Is Perfect For Embedded Applications, And Ideal For Video Systems, 3D Scanners, Vr Cameras, Electronic Microscopes, And Medical Machines..
Wide Compatibility: Usb Cameras Are Widely Available For Windows, Android, Linux, And Mac Os With Uvc Protocol..
High Resolution: Picture Format Mjpeg Or Yuy2 Optional, Cameras With High Resolution Can Be Used In Any Video System For Industrial..
Features
- Full HD Autofocus: 8MP (3280 x 2464)@30fps, full HD USB camera with autofocus lens; Capture most exciting details at every 30/15fps, FoV: 62 (H)
- High Resolution: Picture format MJPEG or YUY2 optional, cameras with high resolution can be used in any video system for industrial.
- UVC Compliant: OTG supported just plug the USB cable into your PC s USB port, and running the software can capture the high-level video and continuous recording, no driver needed.
- Wide Compatibility: USB cameras are widely available for Windows, Android, Linux, and Mac OS with UVC protocol.
- Flexible Application: Lightweight and compact size is perfect for embedded applications, and ideal for Video systems, 3D scanners, VR cameras, electronic microscopes, and medical machines.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Weight: 0.11 pounds
See On Amazon #10
Arducam 8MP IMX219 Auto Focus Camera Module,77.6 Degree FOV,3280 x 2464 px Resolution Compatible with NVIDIA Jetson Nano/NX and NVIDIA Orin NX/AGX Orin
Asin: B082NSDP5L
Frame Rates: Nvidia Jetson Nano/Xavier Nx/Orin Nx/Orin Nano/Agx Orin: 3280X2464@21Fps, 3280X1848@28Fps, 1920X1080@30Fps, 1640X1232@30Fps, 1280X720@60Fps.
Note: This Camera Is Mainly Designed For Jetson Developer Kit. It Also Compatible With Raspberry Pi Compute Module (Like Cm3, Cm3+), But Is Not Compatible With Raspberry Pi 4B, 3B+,3B And Other Third-Party Boards..
Ir Sensitivity: Integral Ir Filter, Visible Light Only; Focal Length: 2.8 Mm; Angle Of View: 77.6 Degree (Diagonal)..
More Than Hd: This Camera Adopts 1/4” 8 Megapixel Imx219 Sensor For Sharp Image, Max. Still Resolution Is 3280 X 2464 Pixels..
Features
- Autofocus: Shoot objects in millimeter level and in the distance on the same camera, automatically controlled without lens adjustment tool, closer and easier than the fixed focus camera.
- More Than HD: This camera adopts 1/4 8 Megapixel IMX219 sensor for sharp image, Max. still resolution is 3280 x 2464 pixels.
- Frame Rates: NVIDIA Jetson Nano/Xavier NX/Orin NX/Orin Nano/AGX Orin: 3280x2464@21fps, 3280x1848@28fps, 1920x1080@30fps, 1640x1232@30fps, 1280x720@60fps
- IR Sensitivity: Integral IR filter, visible light only; Focal Length: 2.8 mm; Angle of View: 77.6 degree (diagonal).
- NOTE: This camera is mainly designed for Jetson Developer Kit. It also compatible with Raspberry Pi Compute Module (like CM3, CM3+), but is not compatible with Raspberry Pi 4B, 3B+,3B and other third-party boards.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #11
Arducam Mega for Arduino Camera Module, 5MP Autofocus SPI Camera, Compatible with Any MCU Camera, Arduino UNO Mega2560 Board, Raspberry Pi
Asin: B0BW7MDVHK
Multiplexing: This Spi Camera Module Can Support Up To 4 Cameras Running On A Single Mcu By Using An Adapter Board. They Capture At The Same Time With Sequential Readout Then..
One Fits All: This 5Mp Autofocus Camera Fits Any Microcontroller With A Single Standard Spi Interface (Either Native Or Mimic). 8-Bit, 16-Bit Or 32-Bit, Arm, Risc-V, Or Others. Arduino, Stm8/Stm32, Esp8266/Esp32, Msp430, Nordic, Renesas, And Countless More..
Open Source Sdk: The Sdk Is Fully Open-Source With Mit License. A Lean Architecture With A Hardware Abstraction Layer, Enabling You To Add A New Mcu Without Effort..
Programmable Autofocus: This Arduino Uno Camera Is Equipped With An Autofocus Lens Which Can Achieve Autofocus At Different Distances. Suitable For The Iot Activities..
Features
- Easy Using: This Arduino camera shield is extremely easy to use. High-level commands were built in so you manipulate the camera through API access like using a DSLR camera via button clicks.
- Programmable Autofocus: This Arduino uno camera is equipped with an Autofocus Lens which can achieve autofocus at different distances. Suitable for the IoT activities.
- Multiplexing: This SPI camera module can support up to 4 cameras running on a single MCU by using an adapter board. They capture at the same time with sequential readout then.
- Open Source SDK: The SDK is fully open-source with MIT license. A lean architecture with a hardware abstraction layer, enabling you to add a new MCU without effort.
- One Fits All: This 5MP autofocus camera fits any microcontroller with a single standard SPI interface (either native or mimic). 8-bit, 16-bit or 32-bit, ARM, RISC-V, or others. Arduino, STM8/STM32, ESP8266/ESP32, MSP430, Nordic, Renesas, and countless more.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #12
Arducam 8MP 1080P USB Camera Module for Raspberry Pi, 1/4 CMOS IMX219 Mini UVC USB2.0 Webcam Board with 1.64ft/0.5m USB Cable for Windows, Linux, Android and Mac OS
Asin: B07YHK63DS | Model: B0196 | PartNumber: B0196
Widely Compatible: Support Windows, Linux, Mac And Android With Uvc..
Applications: This Tiny 38Mmx38mm Camera Board Can Be Installed In Most Hidden And Narrow Position For A Home Surveillance System, Monitoring 3D Printer, Dashcam Or Other Machine Vision Application..
Plug&Play: Uvc-Compliant, Just Connect The Camera To Pc, Laptop, Android Device Or Raspberry Pi With The Usb Cable Without Extra Drivers To Be Installed. Note: If The Device That You Connect Does Not Detect The Camera, Please Check The Usb Port Or Cable..
Capture Video With Audio: Microphone For High-Quality Digital Mic (Optional Dual/Single Channel).Frame Rates: Mjpg 15Fps@3264 X 2448, 30Fps@1080P; Yuv: 10Fps@1280×720/800×600/640×480/320×240..
Features
- More than HD: This camera adopts 8MP IMX219 sensor for sharp image and accurate color reproduction
- Capture Video with Audio: Microphone for high-quality digital MIC (optional dual/single channel).Frame Rates: MJPG 15fps@3264 x 2448, 30fps@1080P; YUV: 10fps@1280 720/800 600/640 480/320 240.
- Widely Compatible: Support Windows, Linux, Mac and Android with UVC.
- Plug&Play: UVC-compliant, just connect the camera to PC, laptop, Android device or Raspberry Pi with the USB cable without extra drivers to be installed. Note: If the device that you connect does not detect the camera, please check the USB port or cable.
- Applications: this tiny 38mmx38mm camera board can be installed in most hidden and narrow position for a home surveillance system, monitoring 3D Printer, dashcam or other machine vision application.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #13
Arducam Mini Module Camera Shield 5MP Plus OV5642 Camera Module, Compatible with Arduino UNO Mega2560 Board
Asin: B013JUKZ48 | Model: B0068 | PartNumber: B0068 | Ean: 0714119484421 | UPC: 714119484421
The Arducam Mini Is Compatible With Arduino, Raspberry Pi, Raspberry Pi Pico,Esp8266, Maple, Chipkit, Beaglebone Black, As Long As They Have Spi And I2c Interface.
It Can Be Used In Iot, Robot, Wildlife, Hdr And Other Battery-Powered Products Or Scientific Image Processing Applications.
Support Jpeg Compression Mode, Single And Multiple Shoot Mode, Short Movie Recording, One Time Capture Multiple Read Operation, Burst Read Operation, Low Power Mode And Etc..
It Integrates 5Mp Cmos Image Sensor Ov5642, And Provides Miniature Size, As Well As The Easy To Use Hardware Interface And Open Source Code Library.
Features
- Arducam Mini Module Camera Shield 5MP Plus OV5642 Camera Module is a general purpose high definition 5MP SPI camera, which reduce the complexity of the camera control interface
- It integrates 5MP CMOS image sensor OV5642, and provides miniature size, as well as the easy to use hardware interface and open source code library
- The Arducam Mini is compatible with Arduino, Raspberry Pi, Raspberry Pi Pico,ESP8266, Maple, Chipkit, Beaglebone black, as long as they have SPI and I2C interface
- Support JPEG compression mode, single and multiple shoot mode, short movie recording, one time capture multiple read operation, burst read operation, low power mode and etc.
- It can be used in IoT, Robot, Wildlife, HDR and Other battery-powered products or scientific image processing applications
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #14
Arducam Day and Night Vision IMX477 HQ Camera for Jetson Nano/Xavier NX and NVIDIA Orin NX/AGX Orin, 12MP Automatic IR-Cut Switching for All-Day Image
Asin: B08PFJDJC9
Less Hassle: No More Wasting Time Looking For The Cs Lens And Camera Case. A 1/2.3″ 6Mm Focal Length Cs Lens Is Included; Hole Pitch: Compatible With 29Mm, 30Mm, 34Mm, Compatible With Standard Industrial Camera Enclosure..
Note: 1. It Compatible With Raspberry Pi Compute Module (Like Cm3, Cm3+), But Is Not Compatible With Standard Raspberry Pi Models (Like Pi 3/3B+/4) 2. This Camera Is Compatible With Jetson Developer Kit, And It Does Not Guarantee To Support Other Third-Party Boards..
Applications: Automatic Switching Ir-Cut Filter And High Resolution Make It Perform Better In Monitoring Octoprint 3D Printer, Day & Night Vision Security Camera System, Motion Detection, Wildlife Photography And Other Machine Vision Projects..
High Quality Imaging: Keep The High Image Quality Of 1/2.3″ 12.3 Megapixel Imx477 Sensor, Max. Still Resolution 4056(H) X 3040(V). Field Of View: 65° (H).
Features
- An All-day Vision IMX477: Built-in a motorized IR-CUT Filter, switched in and out automatically based on light condition (only visible light during the daylight and infrared sensitivity during the night).
- High Quality Imaging: Keep the high image quality of 1/2.3 12.3 Megapixel IMX477 sensor, max. still resolution 4056(H) x 3040(V). Field of View: 65 (H)
- Less Hassle: No more wasting time looking for the CS lens and camera case. A 1/2.3 6mm focal length CS lens is included; Hole Pitch: Compatible with 29mm, 30mm, 34mm, compatible with standard industrial camera enclosure.
- Applications: Automatic Switching IR-CUT filter and high resolution make it perform better in monitoring Octoprint 3D Printer, Day & night vision security camera system, motion detection, wildlife photography and other machine vision projects.
- NOTE: 1. It compatible with Raspberry Pi Compute Module (like CM3, CM3+), but is not compatible with standard Raspberry Pi models (like Pi 3/3B+/4) 2. This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #15
Arducam 8MP IMX219 Camera Module for Raspberry Pi, with Low Distortion 105 (D) FOV M12 Lens, Compatible with Raspberry Pi 5, 4 Model B, Pi 3/3B+, Pi Zero 2W and More
Asin: B09VSRH14M
Wide Compatibility: The Camera Is Not Only Compatible With All Models Of Raspberry Pi 5, 1, 2, 3 And 4, But Also With Raspberry Pi Zero And Zero 2W, Which Can Be Easily Used With A Simple Configuration. Please Note: This Camera Module Is Only Supported With The Latest Pi Os Bullseye (Released On January 18, 2022) And Libcamera, Not With The Previous Pi Os (Legacy)..
Application: Easy To Use For Beginners, And For Advanced Gamers, It Offers More To Explore. Perfect For Time-Lapse, Slow Motion, Home Security Applications, Monitoring Octoprint 3D Printer, And Wildlife Camera Trap Applications..
Easy To Setup: The Package Comes With A 15Cm 15-22Pin Fpc Cable, And A 15Cm 22-22Pin Fpc Cable For Pi 5, Zero And Zero 2W. Simply Connect The Pi Board And Camera With The Fpc Cable And You Can Easily Use This 8Mp High-Quality Camera..
8Mp More Than Hd: Supports 3280 × 2464 Pixel Still Images, As Well As 1080P47, 1640 × 1232P41 And 640 × 480P206 Video Modes, And Still Captures. The Pi Camera Board V2 - 8 Megapixels Is A Leap Forward In Image Quality, Color Fidelity, And Low Light Than The Camera V1..
Features
- For Raspberry Pi Camera: Designed for Raspberry Pi, this 8MP HD camera module has IMX219 8MP pixel sensor with low distortion (<3%) M12 lens. EFL: 2.8mm, F.NO: 2.8, View Angle: 75 Deg. (Horizontal).
- 8MP More than HD: Supports 3280 2464 pixel still images, as well as 1080p47, 1640 1232p41 and 640 480p206 video modes, and still captures. The Pi Camera Board v2 - 8 Megapixels is a leap forward in image quality, color fidelity, and low light than the camera v1.
- Wide Compatibility: The camera is not only compatible with all models of Raspberry Pi 5, 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration. Please note: This camera module is only supported with the latest Pi OS Bullseye (released on January 18, 2022) and libcamera, not with the previous Pi OS (Legacy).
- Easy to setup: The package comes with a 15cm 15-22pin FPC cable, and a 15cm 22-22pin FPC cable for Pi 5, Zero and Zero 2W. Simply connect the Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera.
- Application: Easy to use for beginners, and for advanced gamers, it offers more to explore. Perfect for time-lapse, slow motion, home security applications, monitoring Octoprint 3D Printer, and wildlife camera trap applications.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 Months
See On Amazon #16
Arducam 16MP Wide Angle USB Camera for Laptop, 1/2.8" CMOS IMX298 Mini UVC USB2.0 4K Video Webcam with Microphone, with 3.3ft/1m Cable
Asin: B08LGQFVG7
Plug&Play: Uvc-Compliant, Just Connect The Camera To Pc Computer, Laptop, Android Device Or Raspberry Pi With The Usb Cable Without Extra Drivers To Be Installed. For Mac Os, Please Please Open The Native Software Facetime And Select The Video Camera “Arducam Imx298 Camera”..
Applications: This Tiny 38Mmx38mm Camera Board Can Be Installed In Most Narrow Position, Highly Recommended For A Home Video Surveillance System, Dashcam And Other Vision Applications Demand High Resolution..
High Frame Rates: Mjpg 10Fps@4656X3496/3264X2448/ 2592X1944, 30Fps@1080P/720P/1024X768;Yuy2 10Fps@1024X768/640X768.
Wide Angle: Mounted A High Quality 105 Degree Wide View Angle (Horizontal) M12 Lens With Ir Filter, Provides A Wilder Field Of View..
Features
- Ultra HD: This small camera module adopts 16MP IMX298 sensor for sharp image and accurate color reproduction, still picture resolution: 4656 x 3496 Max.
- Wide Angle: Mounted a High quality 105 degree wide view angle (horizontal) M12 lens with IR filter, provides a wilder Field of View.
- Plug&Play: UVC-compliant, just connect the camera to PC computer, laptop, Android device or Raspberry Pi with the USB cable without extra drivers to be installed. For Mac OS, please please open the native software facetime and select the video camera Arducam IMX298 Camera .
- High Frame Rates: MJPG 10fps@4656x3496/3264x2448/ 2592x1944, 30fps@1080P/720P/1024x768;YUY2 10fps@1024x768/640x768
- Applications: This tiny 38mmx38mm camera board can be installed in most narrow position, highly recommended for a home video surveillance system, dashcam and other vision applications demand high resolution.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #17
Arducam Mini 8MP IMX219 Camera Module for Jetson Nano/NX and NVIDIA Orin NX/AGX Orin, with Low Distortion 105 (D) FOV M12 Lens, Compatible with Raspberry Pi CM3 / CM3+
Asin: B082W4ZSM9 | Model: B0183 | PartNumber: B0183
Ir Sensitivity: Visible Light, Integral Ir Filter. Shutter Type: Rolling Shutter..
Please Note: 1. If The Image Captured Feels Reddish, You Can Down-Load A New .Isp File To Override The Old One(Please See Details In The User Manual) 2. This Camera Is Compatible With Jetson Developer Kit, And It Does Not Guarantee To Support Other Third-Party Boards..
Interface Type: 2-Lane Mipi.
Frame Rates: Nvidia Jetson Nano/Xavier Nx/Orin Nx/Orin Nano/Agx Orin: 3280X2464@21Fps, 3280X1848@28Fps, 1920X1080@30Fps, 1640X1232@30Fps, 1280X720@60Fps.
Features
- Lens spec: EFL: 2.8mm, F.NO: 2.8, View Angle: 75 Deg. (Horizontal)
- Frame Rates: NVIDIA Jetson Nano/Xavier NX/Orin NX/Orin Nano/AGX Orin: 3280x2464@21fps, 3280x1848@28fps, 1920x1080@30fps, 1640x1232@30fps, 1280x720@60fps
- IR Sensitivity: Visible light, Integral IR Filter. Shutter Type: Rolling Shutter.
- Interface Type: 2-Lane MIPI
- Please note: 1. If the image captured feels reddish, you can down-load a new .isp file to override the old one(Please see details in the user manual) 2. This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #18
Arducam 16MP Autofocus Quad-Camera Kit for Raspberry Pi, 16MP IMX519 Autofocus Synchronized Pi Camera, Compatible with Nvidia Jetson Nano/Xavier NX
Asin: B09TSGMCM9
Wide Compatibility: It Is Compatible With The Latest Pi Camera Software (Libcamera) And Uses The Official Pi Camera Tuning Algorithm. It Also Supports Multi-Platform Multi-Camera Solutions For Raspberry Pi, Jetson Nano, Xavier Nx And Many More. And This Camarray Hat Is Also Compatible With Raspberry Pi 3 And Raspberry Pi (V1/V2/Hq) Cameras. Note：This Camera Is Compatible With Jetson Developer Kit, And It Does Not Guarantee To Support Other Third-Party Boards..
Please Note: The Cameras In The Set Are Specifically Designed To Share Clocks With The Hat For Frame-Level Synchronization; However, They Cannot Be Used As Standard Camera Modules On Their Own. Abs Case For Raspberry Pi Camera: B09tng4v55/B09tkyxzfg..
Applications: Multiple Camera Processing Technologies Have Enabled Vr (Virtual Reality), Ar(Augmented Reality), And Other Applications Like Slam (Simultaneous Localization And Mapping). Synchronized Video Streams With Pi Could Be Used For Many Use-Cases (E.G., Stitching, 3D Sensing, Tracking, …) Before Investing In An Expensive Video Multiplexer Hardware..
● Four In One: Combine Four Cameras Into One Frame, Each With A Max Resolution Of 1/4(2288(H)X1736(V); The Maximum Output You Can Get: 4656 X 3496 For Still Images And 1920X1080 For Video. Please Note The Frame Rate For Video And Still Images Will Drop To Half The Frame Rate You Would Normally Get With A Single Camera..
Features
- Designed for Raspberry Pi Camera: This Quad-Camera kit allows you to connect four 16MP IMX519 for Raspberry Pi cameras to a single standard pi board and capture images or video at the same time. (Note: Tripod is not included)
- Four in One: Combine four cameras into one frame, each with a max resolution of 1/4(2288(H)x1736(V); the maximum output you can get: 4656 x 3496 for still images and 1920x1080 for video. Please note the frame rate for video and still images will drop to half the frame rate you would normally get with a single camera.
- Wide compatibility: It is compatible with the latest Pi camera software (libcamera) and uses the official Pi camera tuning algorithm. It also supports multi-platform multi-camera solutions for Raspberry Pi, Jetson Nano, Xavier NX and many more. And this Camarray HAT is also compatible with Raspberry Pi 3 and Raspberry Pi (V1/V2/HQ) cameras. Note This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards.
- Applications: Multiple camera processing technologies have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping). Synchronized video streams with Pi could be used for many use-cases (e.g., stitching, 3D sensing, tracking, ) before investing in an expensive video multiplexer hardware.
- Please note: The cameras in the set are specifically designed to share clocks with the HAT for frame-level synchronization; however, they cannot be used as standard camera modules on their own. ABS Case for raspberry pi camera: B09TNG4V55/B09TKYXZFG.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 Months
See On Amazon #19
Arducam 16MP Wide Angle USB Camera with Metal Case, 1/2.8" CMOS IMX298 Mini UVC USB2.0 4K Video Webcam with Microphone, with 3.3ft/1m Cable for Laptop
Asin: B09BCF6TGK | Model: B026801 | PartNumber: B026801
Plug&Play: Assemble With A Mini Metal Case And Rotatable Bracket, You Can Easily Put On The Desk Or Any Flat Surface, Or Mount On The Wall Or Tripod Mount. Uvc-Compliant, Just Connect The Camera To A Pc Computer, Laptop, Android Device, Or Raspberry Pi With The Usb Cable Without Extra Drivers To Be Installed. For Mac Os, Please Please Open The Native Software Facetime And Select The Video Camera “Arducam Imx298 Camera”..
Applications: This Tiny Camera Can Be Installed In The Most Narrow Position, Highly Recommended For A Home Video Surveillance System, Dashcam, And Other Vision Applications Demand High Resolution..
High Frame Rates: Mjpg 10Fps@4656X3496/3264X2448/ 2592X1944, 30Fps@1080P/720P/1024X768;Yuy2 10Fps@1024X768/640X768.
Wide Angle: Mounted A High Quality 105-Degree Wide View Angle (Horizontal) M12 Lens With Ir Filter, Provides A Wilder Field Of View..
Features
- Ultra HD: This small camera module adopts a 16MP IMX298 sensor for sharp image and accurate color reproduction, still picture resolution: 4656 x 3496 Max.
- Wide Angle: Mounted a High quality 105-degree wide view angle (horizontal) M12 lens with IR filter, provides a wilder Field of View.
- Plug&Play: Assemble with a mini metal case and rotatable bracket, you can easily put on the desk or any flat surface, or mount on the wall or tripod mount. UVC-compliant, just connect the camera to a PC computer, laptop, Android device, or Raspberry Pi with the USB cable without extra drivers to be installed. For Mac OS, please please open the native software facetime and select the video camera Arducam IMX298 Camera .
- High Frame Rates: MJPG 10fps@4656x3496/3264x2448/ 2592x1944, 30fps@1080P/720P/1024x768;YUY2 10fps@1024x768/640x768
- Applications: This tiny camera can be installed in the most narrow position, highly recommended for a home video surveillance system, dashcam, and other vision applications demand high resolution.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon
Looking For Something Else?
Search