PWM to Voltage PWM to 0-5v 0-10v Low Frequency 5~500Hz Linear Conversion Transmitter Module
Asin: B08F9YBT6D | Ean: 9166544556067
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Signal Input Frequency Range: 5Hz～500Hz.
Output Voltage: 0.00V ～ 5.00V/0.00V ～ 10.00V.
Range Of Signal Input Duty Ratio: 0～100%.
Signal Input Voltage Range: 4～24V.
Features
- Power supply voltage: 9V ~ 24V
- Signal input voltage range: 4 24V
- Signal input frequency range: 5Hz 500Hz
- Range of signal input duty ratio: 0 100%
- Output voltage: 0.00V 5.00V/0.00V 10.00V
- See more on Amazon...
Brand: JINGLUYAO | Manufacturer: JINGLUYAO
See On Amazon Similar To PWM to Voltage PWM to
#1
RioRand 300W 5-50V PWM DC Brushless Electric Motor Speed Controller with Hall-Less
Asin: B087M3GVYX
The Power Supply On The Main Board, The Power Supply Positive And Negative Pole Is Reversed Will Cause Permanent Damage To Some Of The Chips On The Board (High Current For A Few Seconds Is Not Possible)..
Do Not Connect The Obvious And Drive Module Voltage, Current, Power Phase Does Not Match Or Far From The Motor To Avoid Inexplicable "Nonsense" Damage..
Received The Goods, In The Wiring And Use Of Unclear, Please Contact Us At The First Time To Communicate, Even If There Are Problems With The Use Of The Product, But Also Friendly Consultation Properly Handled..
Motor Output For Sampling Overcurrent Protection, Due To The Module Power Supply Current Are Very Large. Do Not Artificially Cause A Short Circuit In The Normal Operation Of The Module, A Short Circuit Will Damage The Tube. Wiring Test Machine For Small-Current Low-Voltage Test, Successful Then Through The High-Current High-Voltage . Bare Board Module, Pay Attention To Wire Insulation When Wiring, Forbid Strong Voltage To Touch The Board..
Bldc Wide Voltage 5-50V, High Power 300W, Dc Three-Phase High-Speed Brushless Inductor Controller, Speed Control Support Three Signal Inputs, Pwm Signal Input, Plc 0-5V Touch Volume, 1-4.2V Hall Handle Input..
Features
- This driver is DC three-phase brushless Hall-free control board, the motor without Hall can also work normally.
- BLDC wide voltage 5-50V, high power 300W, DC three-phase high-speed brushless inductor controller, speed control support three signal inputs, PWM signal input, PLC 0-5V touch volume, 1-4.2V Hall handle input.
- The power supply on the main board, the power supply positive and negative pole is reversed will cause permanent damage to some of the chips on the board (high current for a few seconds is not possible).
- Motor output for sampling overcurrent protection, due to the module power supply current are very large. Do not artificially cause a short circuit in the normal operation of the module, a short circuit will damage the tube. Wiring test machine for small-current low-voltage test, successful then through the high-current high-voltage . Bare board module, pay attention to wire insulation when wiring, forbid strong voltage to touch the board.
- Do not connect the obvious and drive module voltage, current, power phase does not match or far from the motor to avoid inexplicable nonsense damage.
- Received the goods, in the wiring and use of unclear, please contact us at the first time to communicate, even if there are problems with the use of the product, but also friendly consultation properly handled.
- See more on Amazon...
Brand: RioRand | Manufacturer: RioRand
Dimensions: 1.18 x 2.36 x 1.97 inches
See On Amazon #2
Easycargo USB Fan Controller, Dual Output USB Fan Quite with Speed Controller 5V for Speed Control with Memory Function
Asin: B07JMQ6KND | Model: NA | PartNumber: NA | Ean: 6091022466749
Wire Length: 40" / 1 Meter.
Please Note: Blue Light On The Fan Controller Means "Off" State. Press The Middle Button, The Controller Status Becomes "On". If The Fans Are Not Working, Need To Keep Press The "Up" Button On The Controller To Turn On The Fans..
The Fan Controller Has Memory Function. It Can Work With Automatic Timers..
Includes Two Usb Output To Control 2 Fans.
Features
- Fan speed controller for optimum air flow and noise control
- Includes two USB output to control 2 fans
- Wire length: 40 / 1 meter
- The fan controller has memory function. It can work with automatic timers.
- Please note: Blue light on the fan controller means OFF state. Press the middle button, the controller status becomes ON. If the fans are not working, need to keep press the UP button on the controller to turn on the fans.
- See more on Amazon...
Brand: Easycargo | Manufacturer: Easycargo
Dimensions: 0.79 x 39.37 x 1.18 inches
See On Amazon #3
AGFRC 18KG Low-Profile Waterproof-Digital-Servo High-Torque - Programmable Metal Gear Smart Winch Servo for 1/10 RC Model, Control Angle 180 (SA18)
Asin: B08YYRKQK5 | Model: SA18 | PartNumber: SA18 | Ean: 0671072398465 | UPC: 671072398465
High Precision & Performance - Advanced Linearity And Accuracy With Precision Magnet Angle Sensor, Stable, Low Noise, Ip67 Waterproof, Dust-Proof. Equipped With Strength Steel Gear, Cnc Middle And Top Aluminium Shell Can Enhance The Heat Dissipation, With Low Power Consumption..
Application - Ideal For 1/10, 1/12 Touring Cars, Racing Cars On Road, Off Road Winch Servo, Airplane, 1/10 Scale Surface, Boat, Aircraft Applications..
High Torque & Speed - The Maximum Torque Of Short Body Servo Is Up To 18 Kg-Cm (250 Oz-In) @ 8.4V. Operating Speed: 0.11Sec/60° @ 8.4V. Operating Voltage: 4.8V ~ 8.4V, Weight: 51G(1.80Oz).
Waterproof Design - Agfrc Steering Digital Servo Motor Uses High-Precision Production Technology To Reduce Production Deviation And Improve Product Tightness. With Ip67 Waterproof Design, Which Make Servo Still Work Normally When Water Enters Into The Servo. Dimension: 40.8*20.2*26.5Mm (1.61*0.80*1.04In).
Features
- Programmable & Winch - The upgrade waterproof digital smart servo is programmable by AGF-SPV2/3 servo programmer(not include) to change torque, speed, angle, inversion, etc. It also can be a winch servo via changing firmware.
- Waterproof Design - AGFRC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness. With IP67 Waterproof design, which make servo still work normally when water enters into the servo. Dimension: 40.8*20.2*26.5mm (1.61*0.80*1.04in)
- High Precision & Performance - Advanced linearity and accuracy with precision magnet angle sensor, stable, low noise, IP67 waterproof, dust-proof. Equipped with strength steel gear, CNC middle and top Aluminium shell can enhance the heat dissipation, with low power consumption.
- High Torque & Speed - The maximum torque of short body servo is up to 18 kg-cm (250 oz-in) @ 8.4V. Operating Speed: 0.11sec/60 @ 8.4V. Operating Voltage: 4.8V ~ 8.4V, Weight: 51g(1.80oz)
- Application - Ideal for 1/10, 1/12 touring cars, racing cars on road, off road winch servo, airplane, 1/10 scale surface, boat, aircraft applications.
- See more on Amazon...
Brand: AGFRC | Manufacturer: AGF-RC Electronic Technology CO.,Ltd
Dimensions: 1.04 x 1.61 x 0.80 Inches | Weight: 0.11 pounds
See On Amazon #4
Asukohu Fan Simulator 12V, 4-Pin, PCB, Fan Presence Simulation for WhatsMiner M30S M31S ATX Interface
Asin: B0CD1XRTJ8 | Ean: 7591600005241
✦Four Lines, 4 Pins, Support Pwm Speed Regulation, Voltage 5-20V..
✦In Theory, As Long As The Fan Can Recognize, Fan Simulator Can Be Used..
✦Fan Simulator Compatible With Whatsminer M30s M31s Atx 4Pins Interface..
✦Miner Change Water Cooling, Silencer, Muffler, Oil Cooling Necessary, Fully Simulate 570~7200 Speed..
Features
- Most machines will detect 2 fan, so it is best to buy two at a time. In addition, the fan simulator only fooled the machine, Simulated fan presence, the heat dissipation of the machine still needs other ways, such as watercooling, such as centrifugal fan.
- Miner change water cooling, silencer, muffler, oil cooling necessary, fully simulate 570~7200 speed.
- Four lines, 4 pins, support PWM speed regulation, voltage 5-20v.
- Fan Simulator compatible with WhatsMiner M30S M31S ATX 4pins interface.
- In theory, as long as the fan can recognize, Fan Simulator can be used.
- See more on Amazon...
Brand: Asukohu | Manufacturer: Asukohu
See On Amazon #5
LexonElec 60% Wired RGB Gaming Keyboard,62 Keys Compact Mechanical Keyboard New Degsin Keycaps,Detachable USB Type-C,Blue Switch 18 LED Chroma Backlit for Typists and Gamers-Blue
Asin: B09T95K8HZ | Ean: 0607001459648 | UPC: 607001459648
【Full Key Anti-Ghosting】Each Key Of The Wired Mechanical Keyboard Has An Independent Switch Control, Allowing Multiple Keys To Run At High Speed At The Same Time Without Conflict. The Powerful Game Performance Allows You To Enjoy High-End Games With Extremely Fast Response Speed. It Is An Essential Device For Game Players..
【Plug And Play】The Keyboard Is Delivered With A Detachable Usb Type-C Cable For Easy Carrying. The Wired Keyboard Is Plug And Play, No Driver Software Is Required. It Can Be Widely Compatible With Pc, Laptop, Computer, Windows 2000 / 7/ 10 / Xp / Vista / Me / Mac Os And Other Devices.Long Press Fn+Esc For About 3 Seconds To Restore The Keyboard To Factory Settings..
【Blue Switch Mechanical Keyboard】The Gaming Keyboard Uses The Most Distinctive Classic Mechanical Switch--Blue Switch. The Strong Sense Of Paragraphs In The Unique Style Of The Blue Switch Makes People Indulge In It. The Rhythmic, Crisp "Click" Sound Brings You A Pleasant Feeling Of Use. Low Pressure, Quick And Sensitive Response. Very Suitable For Typing And Gaming..
【Customizable Rgb Backlit Keyboard】The Mini Mechanical Keyboard With True Rgb Chroma Backlit, Each Led Lamp With 256 Grade Pwm, 18 Basic Cool Lighting Effects, Add Fun To The Game. You Can Customize The Backlight Through The Driver To Achieve The Backlight Effect You Want. Press Fn+Backspace Key To Turn Off Or Turn On The Backlight..
Features
- 60% Mechanical Gaming Keyboard The obvious advantages of small size and large functions make this mini keyboard the best choice for players. The keyboard with a compact 62-key design, which can achieve 89-key standard keys and multimedia functions through the FN combination. The size is only 60% of the full-size keyboard, which saves desktop space and is easy to carry around.
- Customizable RGB Backlit Keyboard The mini mechanical keyboard with true RGB chroma backlit, each LED lamp with 256 grade PWM, 18 basic cool lighting effects, add fun to the game. You can customize the backlight through the driver to achieve the backlight effect you want. Press FN+Backspace key to turn off or turn on the backlight.
- Full Key Anti-Ghosting Each key of the wired mechanical keyboard has an independent switch control, allowing multiple keys to run at high speed at the same time without conflict. The powerful game performance allows you to enjoy high-end games with extremely fast response speed. It is an essential device for game players.
- Blue Switch Mechanical Keyboard The gaming keyboard uses the most distinctive classic mechanical switch--blue switch. The strong sense of paragraphs in the unique style of the blue switch makes people indulge in it. The rhythmic, crisp click sound brings you a pleasant feeling of use. Low pressure, quick and sensitive response. Very suitable for typing and gaming.
- Plug and Play The keyboard is delivered with a detachable USB Type-C cable for easy carrying. The wired keyboard is plug and play, no driver software is required. It can be widely compatible with PC, laptop, computer, Windows 2000 / 7/ 10 / XP / VISTA / ME / MAC OS and other devices.Long press FN+ESC for about 3 seconds to restore the keyboard to factory settings.
- See more on Amazon...
Brand: LexonElec | Manufacturer: LexonElec
Dimensions: 1.00 x 11.00 x 4.00 inches
See On Amazon #6
4cm Internal Heat Dissipation Fan Replacement for Xbox One Kinect 2.0 Games Console Cooler U40R05MS1A7-57A07A X880927-004 5V 0.08A 0.4W 4PIN 40 * 40 * 15mm 4015 Gameing Console Cooling
Asin: B0D2SZG9J6 | Model: FS-6805 | PartNumber: FS-6805
Voltage: Dc 5V Pwm Temperature Control For Cooling / Current: 0.08Amp Ultra Silent Cooling Fan / Power Connector: 4-Pin Header.
After-Sales Service: The Console Fan Comes With A 6 Month Warranty And Promises Customers An Unconditional 3 Month Return After Pickup If There Is Damage.Before Placing Your Order,Please Check Your Xbox Model And Fans To Ensure Compatibility.If You Have Any Questions,Feel Free To Contact Us..
Cooling Method: Air / Bearing Type: Magnetic Levitation Bearings / Compatible Devices: Xbox / Games Console.
Model: U40r05ms1a7-57A07a X880927-004 / This Temperature-Controlled Silent Console Fan Makes You More Comfortable..
Features
- Wide Compatibility : Suitable FOR Xbox One Kinect 2.0,and more.Check your Xbox for compatibility.
- Model: U40R05MS1A7-57A07A X880927-004 / This temperature-controlled silent Console fan makes you more comfortable.
- Voltage: DC 5V PWM Temperature Control for Cooling / Current: 0.08AMP Ultra Silent Cooling Fan / Power Connector: 4-Pin Header
- Cooling Method: Air / Bearing type: Magnetic Levitation Bearings / Compatible Devices: Xbox / Games Console
- After-sales Service: The Console fan comes with a 6 month warranty and promises customers an unconditional 3 month return after pickup if there is damage.Before placing your order,please check your Xbox model and fans to ensure compatibility.If you have any questions,feel free to contact us.
- See more on Amazon...
Brand: QHMLMJT | Manufacturer: QHMLMJT
See On Amazon #7
Handwheel Motion Controller, 5 Axle USB Interface Board CNC Motion Control Card with Handwheel CNC Controller for CNC Router Engraving Machine
Asin: B0D2LJ6BXN
Voltage Output - One-Way Optocoupler-Isolated 0-10V Analog Voltage Output Can Control The Inverter Input From 0-10V Analog Voltage To Control The Spindle Speed, Can Be Used For Many Styles And Types Of Cnc Machines..
4 Output Port - Cnc Stepper Motor Kit Provide 4 Output Port, 5V Leveling, Which Can Be Connected With Photocoupler Relay Module To Control Water Cooling, Spray And So On, Suitable For Lathes, Cnc Routers,Pick And Place And Milling Machine,Lathe Machine..
Pwm Output - Cnc Controller Adopt Pwm Output Is Provided, Which Can Be Connected To The Spindle Governor Controlled By Pwm, Support Various Versions Of Software And Support The Latest Version..
Function - All Input Signals Are Isolated By Optical Diaphragm, Which Can Be Connected To Emergency Stop, Tool Setting, Limit Position, 0 Return, Ensure Computer Security, Input Can Be Connected To A Mechanical Switch Or A Proximity Switch..
Features
- Voltage range - Electrical motor controls has wide external voltage input, 12-24V, and anti-reverse function, provides high control precise for stepper motors and servo motors, perfect for powering fans, small motors, soldering irons.
- Function - All input signals are isolated by optical diaphragm, which can be connected to emergency stop, tool setting, limit position, 0 return, ensure computer security, input can be connected to a mechanical switch or a proximity switch.
- Voltage output - One-way optocoupler-isolated 0-10V analog voltage output can control the inverter input from 0-10V analog voltage to control the spindle speed, can be used for many styles and types of CNC machines.
- PWM output - CNC controller adopt PWM output is provided, which can be connected to the spindle governor controlled by PWM, support various versions of software and support the latest version.
- 4 output port - CNC stepper motor kit provide 4 output port, 5V leveling, which can be connected with photocoupler relay module to control water cooling, spray and so on, suitable for lathes, cnc routers,pick and place and milling machine,lathe machine.
- See more on Amazon...
Brand: Agatige | Manufacturer: Agatige
Dimensions: 2.36 x 9.45 x 3.54 inches | Weight: 2.09 pounds
See On Amazon #8
Solar Charging Regulator, Leftwei 12V 24V Automatic Portable Solar Panel Regulator, Solar Regulator, Blue Outdoor for Home
Asin: B08FXMBW5D | Ean: 8481114083622
Double Reverse Current Protection: Solar Charge Controller.With Double Reverse Current Protection, Low Heat Generation, Built‑In Short Circuit Protection, Open Circuit Protection, Reverse Connection Protection, Overload Protection.
Rated Voltage:Charge Controllers For Solar Panels.12V 24V Automatic.
Dual Usb Output:Solar Charger Controller.Portable, Easy To Carry And Use, Dual Usb Output, Can Bring Convenience To Your Life.
4‑Level Pwm:Solar Panel Battery Intelligent Regulator.Totally 4‑Level Pwm Charging Management, With Large Lcd Display, All Parameters Are Adjustable.
Features
- DIGITAL DISPLAY:Renewable Energy Controllers.This product has built in microcontroller, one key setting, digital display, and automatic memory function
- 4 level PWM:Solar Panel Battery Intelligent Regulator.Totally 4 level PWM charging management, with large LCD display, all parameters are adjustable
- DOUBLE REVERSE CURRENT PROTECTION: Solar Charge Controller.With double reverse current protection, low heat generation, built in short circuit protection, open circuit protection, reverse connection protection, overload protection
- DUAL USB OUTPUT:Solar Charger Controller.Portable, easy to carry and use, dual USB output, can bring convenience to your life
- RATED VOLTAGE:Charge Controllers For Solar Panels.12V 24V Automatic
- See more on Amazon...
Brand: Leftwei | Manufacturer: Leftwei
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #9
Yaheeda New Version Converter, 110V AC to 12V DC Converter Power Supply 12V 600W 50A DC Switch Transformer for RV,Pump,LED Strip, LCD Monitor
Asin: B0B2CVWNFH
【Safety Features】Automatic Overload Cut-Off, Over Voltage Cut-Off, Automatic Thermal Cut-Off, Short Circuit Protection.High Reliability, Low Temperature Rise,Built-In Emi Filter, 100% Full Load Burn-In Tested..
【Applications Widely】Simultaneous Power Supplies For Devices Different Currents/Watts. Used For Dc 12V Pump, Pcp Air Compressor,Winch, Car Jack, Car Stereos, Amplifier, Radios, Air Compressor, Led Light Strip, Brushless Motor, Household Appliances, Electronic Devices, Automation Equipment, Computer Project, Servos, Etc Cannot Be Used On The: Programming / Adjustable-Speed Motor /Pwm Motor/ Dimming Light / Plant Light / Dc Power Controller.
【Includ Clamps And Copper Wire】12V 50A 600W Power Supply Converter With Ul Power Cord ,Wire Lugs, Metal Clip And Screw. Dial To The Correct Gear Position, Cut Off The Power Before Disassembling The Connection.
【One-Key Operate】With Red Button On/Off Switch Function, More Safe And Convenient Power Start/Stop Operation, Switch Transformer Build With Imported Aluminum Alloy Shell ,Built-In Wire Integrated Design, Dual Power Connection Methods..
Features
- ADJUSTABLE Voltage and Current Input voltage: AC 110V / 220V (85-145V / 185-265V); Output current depends on the device, e.g.DC 12V 10A 120W, 20A 240W, 35A 420W, and the peak current is 50A, peak power 600W. Recommended for equipment below 40A 480W. For resistive device, SMPS peak power device power 1.25 times. For Motor device, the peak power of the SMPS needs to be more than 2 times the power of the Motor.
- One-Key Operate With red button on/off switch function, more safe and convenient power start/stop operation, Switch Transformer build with Imported Aluminum alloy shell ,Built-in wire integrated design, Dual power connection methods.
- Safety Features Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection.High Reliability, Low Temperature Rise,Built-in EMI filter, 100% Full load burn-in Tested.
- Includ Clamps and Copper Wire 12V 50A 600W Power Supply converter with ul power cord ,wire lugs, metal clip and screw. Dial to the correct gear position, cut off the power before disassembling the connection
- Applications Widely Simultaneous power supplies for devices different currents/watts. Used for DC 12V Pump, PCP Air Compressor,Winch, Car Jack, Car Stereos, Amplifier, Radios, Air Compressor, LED Light Strip, Brushless Motor, Household Appliances, Electronic Devices, Automation Equipment, Computer Project, Servos, etc Cannot be used on the: Programming / Adjustable-Speed Motor /PWM Motor/ Dimming Light / Plant Light / DC Power Controller
- See more on Amazon...
Brand: Yaheeda | Manufacturer: Yaheeda
Warranty: 1 years
See On Amazon #10
DROK Waterproof DC Buck Converter Voltage Regulator 8-22V to 3-15V 5V 12V 3A Adjustable Output Power Supply Transformer Step-Down Volt Module Board for Car Auto Vehicle Motor Regulated SR
Asin: B00C0KL1OM | Model: 090010 | PartNumber: 090010 | Ean: 0619397027004 | UPC: 619397027004
Fully Sealed, Outer Enclosure Acts As A Heat Sink, Specially Made To Be Waterproof, Anti-Shock, Anti-Humidity And Dust-Proof, More Durable..
Perfect For Electronic Hobby Project, Wide Application, You Can Use It On Radio, Car Audio, Led Display, Motor, Cell Phone, Etc..
With Reversed-Connection Protection, Over-Current Protection, Over-Heating Protection And Over-Voltage Protection, Hence Is Safe To Use..
With Potentiometer On The Bottom, Which Allows You Adjust The Accuracy With The Mini Screw, But Ensures You Won't Easily Change Its Setting When Mounted..
Features
- Uses synchronous rectification technology, has high conversion efficiency and stable performance; The input should be at least 3V higher than output.
- With potentiometer on the bottom, which allows you adjust the accuracy with the mini screw, but ensures you won't easily change its setting when mounted.
- Fully sealed, outer enclosure acts as a heat sink, specially made to be waterproof, anti-shock, anti-humidity and dust-proof, more durable.
- With reversed-connection protection, over-current protection, over-heating protection and over-voltage protection, hence is safe to use.
- Perfect for electronic hobby project, wide application, you can use it on radio, Car Audio, LED display, motor, cell phone, etc.
- See more on Amazon...
First Available: 05/26/2021
Brand: DROK | Manufacturer: DROK
Dimensions: 0.79 x 1.30 x 0.98 inches | Weight: 0.00 Pounds
Warranty: 1 year
See On Amazon #11
DC DC Buck Boost Converter Variable Voltage Regulator CC CV 0.5-30V 4A 5V 6V 12V 24V Power Module Adjustable Voltage Regulated Laboratory Power Supply
Asin: B0978T3JKH | Model: 4KX | PartNumber: 4KX | Ean: 0707025203422 | UPC: 707025203422
Safe Protection: The Module Is With Anti-Reverse Connection Protection Of Input End, So That It Will Not Burn Out When There Is Reverse Connection.Anti-Backflow Protection At The Output End. No Need To Add Anti-Backflow Diode When Charging. Multiple Software Protection Mechanisms Are Available, And The Protection Threshold Is Adjustable. When The Working Parameters Of The Module Exceed The Protection Threshold, The Output Will Be Automatically Turned Off.
Output Ripple Is Small And Πfilter Is Available.Thick Heat Sink .Buck-Boost Integrated.
Application: The Volt Conversion Board Can Be Used As An Ordinary Buck/Boost Module With Over-Current Protection; Used As A High-Power Led Constant Current Driver Module; Diy A Solar Power Controller, Battery Charging.
Lcd Displays Input/Output Voltage, Output Current/Output Power/Output Capacity/Output Time.The Module Can Be Set To On/Off By Default.
Features
- input voltage range is DC 5-30V; output voltage range is DC 0.5-30V, can be arbitrary adjustable; output current can be 3A for long term use, if enhance heat dissipation, it can reach 4A; max output power is 35W, if enhance dissipation, it can reach 50W
- LCD displays input/output voltage, output current/output power/output capacity/output time.The module can be set to ON/OFF by default
- Safe Protection: the module is with Anti-reverse connection protection of input end, so that it will not burn out when there is reverse connection.Anti-backflow protection at the output end. No need to add anti-backflow diode when charging. Multiple software protection mechanisms are available, and the protection threshold is adjustable. When the working parameters of the module exceed the protection threshold, the output will be automatically turned off
- Application: the volt conversion board can be used as an ordinary buck/Boost module with over-current protection; used as a high-power LED constant current driver module; DIY a solar power controller, Battery Charging
- Output ripple is small and filter is available.Thick heat sink .Buck-boost Integrated
- See more on Amazon...
Brand: TKXEC | Manufacturer: shenzhenshixinruidianzikejiyouxiangongsi
Dimensions: 1.02 x 3.11 x 1.69 Inches | Weight: 0.15 Pounds
See On Amazon #12
4 Pieces Adjustable LM2596S DC-DC Buck Converter Reduced Voltage Regulator Power Module 36V 24V 12V to 5V 2A Voltage Stabilizer with Digital Voltmeter Display
Asin: B081N6WWJS | Model: Frienda-Power Converters-01 | PartNumber: Frienda-Power Converters-01
Easy To Use: With Terminal Block, No Soldering Iron Is Also Convenient To Use, And Retain The Wire Bond Point (The Input Voltage Must Be Higher Than The Voltage To Be Output By 1V Or More).
Nice Design: With 150Khz Internal Oscillation Frequency, Features Low Power Consumption And High Efficiency; When The Output Voltage Cannot Be Adjusted And Is Always Equal To The Input Voltage, Please Turn The Potentiometer Counterclockwise For More Than 10 Turns, And Then Use The Module To Adjust The Voltage Normally; This Is Because When The Module Leaves The Factory, The Default Output Voltage Is About 20V.
Output Current: The Maximum Output Current Can Be As High As 3A, The Recommended Working Current Is About 2A, More Than 2A Plus Heat Sink.
Simple To Operate: The Voltmeter Can Be Turned Off, And The Switch Can Be Turned Off By Pressing And Holding The Switch For More Than 1 Second And Less Than 4 Seconds, Once The Voltmeter Is Turned Off, Simply Press The Switch To Turn On The Voltmeter.
Features
- Product parameters: input voltage is 4.0V - 40V, output voltage is 1.25V - 37V, output current is 2A (normal and stable) and 3A max, conversion efficiency 92% (highest), output ripple under 30mV, switching frequency 150KHz, operating temperature is -45 to 85 degree Celsius
- Simple to operate: the voltmeter can be turned off, and the switch can be turned off by pressing and holding the switch for more than 1 second and less than 4 seconds, once the voltmeter is turned off, simply press the switch to turn on the voltmeter
- Easy to use: with terminal block, no soldering iron is also convenient to use, and retain the wire bond point (the input voltage must be higher than the voltage to be output by 1v or more)
- Output current: the maximum output current can be as high as 3A, the recommended working current is about 2A, more than 2A plus heat sink
- Nice design: with 150KHz internal oscillation frequency, features low power consumption and high efficiency; When the output voltage cannot be adjusted and is always equal to the input voltage, please turn the potentiometer counterclockwise for more than 10 turns, and then use the module to adjust the voltage normally; This is because when the module leaves the factory, the default output voltage is about 20V
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
Weight: 0.20 Pounds
See On Amazon #13
UCTRONICS DC 9V 12V 24V to DC 5V 5A Buck Converter Module, 9-36V Step Down to USB 5V Transformer Dual Output Voltage Regulator Board [2 Pack]
Asin: B07XXWQ49N | Model: U6223 | PartNumber: U6223
High-Efficient Transformation: The Module Adopts The New Technology Synchronous Rectification, Which Improves Conversion Efficiency Obviously And Expands The Working Voltage And Current..
Application: As A Usb 5V Buck Converter, Diy A Phone Charger, Refit Car Charger, Supply Power To Raspberry Pi 4 B..
Mini And Portable: 63 X 2 X 10Mm, Suitable For Various Narrow Installation Space And Small Case..
Input Port: 5.5Mm×2.1Mm Dc Socket And Wiring Terminal, Each Way Makes The Module Work; Output Port: Usb And Wiring Terminal, Can Output Power At The Same Time..
Features
- Power Supply: DC 9-36V; Output Voltage: 5-5.3V; Output Power: 18W to 30W (input DC 9-24V, output 5.2V/6A; input DC 24-32V, output 5.2V/5A; input DC 32-36V, output 5.2V/3.5A)
- Input Port: 5.5mm 2.1mm DC socket and wiring terminal, each way makes the module work; Output Port: USB and wiring terminal, can output power at the same time.
- High-efficient Transformation: the module adopts the new technology synchronous rectification, which improves conversion efficiency obviously and expands the working voltage and current.
- Mini and Portable: 63 x 2 x 10mm, suitable for various narrow installation space and small case.
- Application: as a USB 5V buck converter, DIY a phone charger, refit car charger, supply power to raspberry pi 4 b.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.10 pounds
See On Amazon #14
Valefod 6 Pack LM2596 DC to DC High Efficiency Voltage Regulator 3.2-35V to 1.25-30V Buck Converter DIY Power Supply Step-Down Module
Asin: B076H3XHXP | Model: VA-HW-411 | PartNumber: VA-HW-411 | Ean: 0889328049201 | UPC: 889328049201
【Output Voltage】Dc 1.25V To 30V Voltage Is Continuously Adjustable, Maximum Output Current Is 3A..
【Easy To Diy】Connect To Power Source, Using A Mini Screwdriver To Increase Or Decrease Output Voltage By Adjusting The Screw On The Blue Potentiometer And Monitor Voltage With Multimeter To Get The Needed Voltage, Clockwise To Step Up Voltage And Counterclockwise To Step-Down Voltage. (Factory Default Stays A High Voltage, You Need To Contrarotate About 7-15 Circles Before The Voltage Starts Ramping Down, 1 Circle Means +/- 1V).
【Mini Size】45 * 23 * 14 Mm (With Potentiometer). 6Pcs Included..
【Input Voltage】Dc 3.2V To 35V (Input Voltage Must Be 1.5V Higher Than The Output Voltage, No Boost)..
Features
- High Precision The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects.
- Input Voltage DC 3.2V to 35V (input voltage must be 1.5V higher than the output voltage, no boost).
- Output Voltage DC 1.25V to 30V voltage is continuously adjustable, maximum output current is 3A.
- Mini Size 45 * 23 * 14 mm (with potentiometer). 6pcs included.
- Easy to DIY Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
Dimensions: 0.55 x 0.90 x 1.77 inches | Weight: 0.03 Pounds
See On Amazon #15
DC Power Supply 24V 1200W, AC 110V-220V to DC 24V 50A 1200W Universal Regulated Switching AC to DC Converter Built-in Cooling Fan for LED Strip Light CCTV Computer Project 3D Printer
Asin: B0CCYL56PT | Ean: 5057803517520
Dual Input Voltage: Ac 100-110V/220-240V There Is A Voltage Selector Switch Located On The Side Of The Switcher, It's Used To Set The Input Voltage To The Power Supply To Either 100-110V Or 220-240V..
Led Power Supply Transformer Driver Widely Used In Led Lighting, Home Appliance, Instrumentation, Office Automation, Telecom, Process And Engineering Industries Etc..
It Comes With Built-In Cooling Fan, Which Makes Heat Dissipation More Efficient. The Fan Will Start Running Once Powered To Prevent It From Overheating..
Builinput: 110V/220V Ac; Output: Dc 24V, 0A~50A 1200W Max. Output Voltage Is ±0.5% Adjustable. Three Sets Of Output Channels, Total 1200W. T-In Over Voltage, Over Current, And Short Circuit Protectionpwm Design, Make Sure The Stability And High Efficiency Of Power Supply.Anti-Jamming, Passed Emc Test, Wave Less Than 20Mv.Constant Voltage Output, Assume Stable Power Supply For Led Lightings To Reach Long Lifetime..
Features
- It has shortage protection, overload protection and over voltage protection.
- BuilInput: 110V/220V AC; Output: DC 24V, 0A~50A 1200W max. Output voltage is 0.5% adjustable. Three sets of output channels, total 1200W. t-in over voltage, over current, and short circuit protectionPWM design, make sure the stability and high efficiency of power supply.Anti-jamming, passed EMC test, wave less than 20MV.Constant voltage output, assume stable power supply for LED lightings to reach long lifetime.
- Dual input voltage: AC 100-110V/220-240V there is a voltage selector switch located on the side of the switcher, it's used to set the input voltage to the power supply to either 100-110V or 220-240V.
- It comes with built-in cooling fan, which makes heat dissipation more efficient. The fan will start running once powered to prevent it from overheating.
- LED power supply transformer driver widely used in LED lighting, Home Appliance, Instrumentation, Office Automation, Telecom, Process and Engineering Industries etc.
- See more on Amazon...
Brand: SDRGEEK | Manufacturer: SDRGEEK
Weight: 3.09 pounds
Warranty: 1 year
See On Amazon #16
uxcell Power Voltage Converter DC 12V/24V to DC 6V 10A 60W Waterproof Voltage Convert Transformer
Asin: B01CUA4KK8 | Model: US-SA-AJD-141889 | PartNumber: US-SA-AJD-141889
Auto-Recovery When Device Is Back To Normal Operating; High Transfer Efficiency Of 92% Max...
Note: It Is Recommended To Use Stable Dc Power For The Input Power Supply If You Use The Pulsed Dc Power Provided By The Generator, Please Filter It With Capacitor Before Connecting It To The Converter. If You Use Solar Panel To Supply Directly, Please Note That The Open Circuit Voltage Of The Solar Panel Cannot Exceed The Maximum Withstand Voltage Of The Converter. The Supply Voltage Should Be Within The Rated Voltage And Always Leave A Certain Margin..
Die-Cast Aluminum Shell, Anti-Shock, And Moisture-Proof And Has Stronger Durability.New And Old Label Is Being Changed, But The Products Are Same..
Protections: Over-Load, Over-Current, Over-Temperature, Short-Circuit, Over-Voltage..
Features
- Waterproof IP68 Voltage Converter DC 12V/24V(9V-35V DC) to DC 6V 10A 60W(Note: the load rating should be less than or equal to 10A).
- Protections: Over-load, Over-current, Over-temperature, Short-circuit, Over-voltage.
- Auto-recovery when device is back to normal operating; high transfer efficiency of 92% max..
- Die-cast aluminum shell, anti-shock, and moisture-proof and has stronger durability.New and Old label is being changed, but the products are same.
- Note: It is recommended to use stable DC power for the input power supply If you use the pulsed DC power provided by the generator, please filter it with capacitor before connecting it to the converter. If you use solar panel to supply directly, please note that the open circuit voltage of the solar panel cannot exceed the maximum withstand voltage of the converter. The supply voltage should be within the rated voltage and always leave a certain margin.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.51 x 3.15 inches | Weight: 0.25 pounds
See On Amazon #17
Valefod 3 Pack LM2596 DC to DC Voltage Regulator 4-40V to 1.5-35V Buck Converter with LED Display
Asin: B07WQJ2GD6 | Model: VA-0162-BL | PartNumber: VA-0162-BL | Ean: 0793118392197 | UPC: 793118392197
【Output Voltage】Dc 1.5V To 35V Voltage Is Continuously Adjustable, Maximum Output Current Is 3A..
【Easy To Diy】Connect To Power Source, Using A Mini Screwdriver To Increase Or Decrease Output Voltage By Adjusting The Screw On The Blue Potentiometer And Monitor Voltage With Multimeter To Get The Needed Voltage, Clockwise To Step Up Voltage And Counterclockwise To Step-Down Voltage. (Factory Default Stays A High Voltage, You Need To Contrarotate About 7-15 Circles Before The Voltage Starts Ramping Down, 1 Circle Means +/- 1V).
【Mini Size】57*36*13 Mm (With Potentiometer). 3Pcs Included..
【Input Voltage】Dc 4V To 40V (Input Voltage Must Be 1.5V Higher Than The Output Voltage, No Boost)..
Features
- High Precision The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects.
- Input Voltage DC 4V to 40V (input voltage must be 1.5V higher than the output voltage, no boost).
- Output Voltage DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A.
- Mini Size 57*36*13 mm (with potentiometer). 3pcs included.
- Easy to DIY Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V)
- See more on Amazon...
Brand: Valefod | Manufacturer: Valefod
See On Amazon #18
Noctua NA-VC1, 24V to 12V Step-Down Voltage Converter (Buck Converter) for Running 12V PC Fans in 24V Applications (3D Printers, etc.)
Asin: B0C6TQCQP7 | Model: NA-VC1 | PartNumber: NA-VC1 | Ean: 9010018201390
Up To 9W Output, Can Run Multiple Fans When Combined With Optional Na-Syc1 Splitter Cables Or Na-Fh1 Fan Hubs (E.G. Up To 18 Nf-A4x10 Pwm Or 15 Nf-A4x20 Pwm Fans).
Full Compliance With All Applicable Safety Standards (En 62368-1, En 55035, En 55032), Ce, Ukca And Ul Certification, Renowned Noctua Quality Backed Up By A 6 Year Manufacturer’S Warranty.
Supports Rpm Speed Monitoring As Well As Pwm- And Voltage-Based Speed Control, Pwm Signal (E.G. From Optional Na-Fc1 Controller) Is Passed Through, Output Voltage Scales Linear With Input Voltage.
Ultra-Compact, Lightweight Design Is Easy To Integrate Into Standard Cabling Setups, Full Protection Against Short-Circuits, Reverse Polarity, Overcurrent And Overheating With Self-Resetting Fuse.
Features
- Allows any Noctua 12V fan and most third party PC fans to be run in 24V environments such as popular 3D printers (e.g. Creality Ender 3 and CR-10, Anycubic Mega, etc.) or automotive applications
- Ultra-compact, lightweight design is easy to integrate into standard cabling setups, full protection against short-circuits, reverse polarity, overcurrent and overheating with self-resetting fuse
- Up to 9W output, can run multiple fans when combined with optional NA-SYC1 splitter cables or NA-FH1 fan hubs (e.g. up to 18 NF-A4x10 PWM or 15 NF-A4x20 PWM fans)
- Supports RPM speed monitoring as well as PWM- and voltage-based speed control, PWM signal (e.g. from optional NA-FC1 controller) is passed through, output voltage scales linear with input voltage
- Full compliance with all applicable safety standards (EN 62368-1, EN 55035, EN 55032), CE, UKCA and UL certification, renowned Noctua quality backed up by a 6 year manufacturer s warranty
- See more on Amazon...
Brand: Noctua | Manufacturer: Noctua
Weight: 0.02 pounds
Warranty: 6 year manufacturer’s warranty
See On Amazon #19
U3-HV USB DAQ Device with 4 Dedicated High-Voltage ( 10V) Analog Inputs, 12 Flexible I/O for Analog and Digital Data Acquisition of Sensors, Controlling Relays, Automation and Timers
Asin: B001716LD6 | Model: U3-HV | PartNumber: U3-HV | Ean: 0689076273862 | UPC: 689076273862
4 High-Voltage Data Logger Analog Inputs And 12 Flexible I/O (Digital Input, Digital Output, Or Lv Analog Input).
Includes Free Software & Support For Life, 5 Years Warranty, Documentation And Datasheet Written By Us Engineers Who Designed The Device.
Up To 2 Timers (Pulse Counting/Timing, Pwm Output, Quadrature Input).
The Data Logger U3 Series Is A Versatile Product For Precise Measurement And Control Within Simple Analog And Digital Systems..
Features
- USB DAQ real time module device with 4 dedicated high-voltage analog inputs, 12 flexible I/O, and 4 dedicated digital I/O. The flexible I/O can be configured as either digital or analog, thus providing up to 16 analog inputs, or up to 16 digital I/O. It also has two 10-bit analog outputs, up to 2 counters, and up to 2 timers.
- The data logger U3 series is a versatile product for precise measurement and control within simple analog and digital systems.
- 4 High-voltage data logger Analog Inputs and 12 Flexible I/O (Digital Input, Digital Output, or LV Analog Input)
- Up to 2 Timers (Pulse Counting/Timing, PWM Output, Quadrature Input)
- Includes Free Software & Support for Life, 5 Years Warranty, Documentation and Datasheet written by US Engineers who designed the device
- See more on Amazon...
Brand: LabJack | Manufacturer: LabJack
Dimensions: 1.20 x 3.00 x 4.50 inches
See On Amazon #20
Voltage Reducer DC 8V-40V to 12V 3A 36W Automatic Buck Boost Converter Step Down Up Regulator Waterproof Module Transformer for Golf Cart Club Car
Asin: B07V8K6YZ6 | Model: 8-40V/12V | PartNumber: 8-40V/12V | Ean: 0192834003323 | UPC: 192834003323
Compact Aluminium Shell With Epoxy Potting, 100% Waterproof, Anti-Dust, Anti-Shock Protection And Better Heat Dissipation.
Safely And Reliable In -40°C~80°C Range..
Assembled With Smart Chip, Features Over-Current /Over-Load /Low-Load /Short-Circuit /Over-Heat Intelligent Protection.
Adopt Synchronous Rectification Technology To Improve Conversion Efficiency, Maximum Efficiency:≥95%; Ripple Wave: 50Mv; Starting Delay Time:≤2S.
Features
- Input Voltage: 12V/24V/36V nominal, accept(8V-40V) range; Output Voltage: DC 12V 3A 36W
- Adopt Synchronous Rectification Technology to improve conversion efficiency, Maximum Efficiency: 95%; Ripple Wave: 50Mv; Starting delay time: 2S
- Compact aluminium shell with epoxy potting, 100% waterproof, anti-dust, anti-shock protection and better heat dissipation
- Assembled with smart chip, features Over-current /Over-load /Low-load /Short-circuit /Over-heat intelligent protection
- safely and reliable in -40 C~80 C range.
- See more on Amazon...
Brand: HOMELYLIFE | Manufacturer: EPBOWPT
Dimensions: 0.70 x 2.50 x 2.10 inches | Weight: 0.24 pounds
See On Amazon
Looking For Something Else?
Search