Class A Customs | 2 Gallons of Acrylic Water Based Adhesive Glue for RV Roof Roofing RVs Campers Trailers | CAC-AWBA-2GAL | Works on Dicor TPO EPDM and PVC | CAC-AWBA-2GAL
Asin: B08GCNJCF6 | Ean: 0782731951959 | UPC: 782731951959
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Remains Flexible To Compensate For Expansion And Contraction Of The Membrane Itself.
Proven To Be Stronger Than Leading Competitors Brands.
Coverage: 160-200 Sq Ft/Gal.
Used For Roofing Rvs, Campers, And Trailers Designed To Bond Epdm, Pvc, And Hypalon To Wood Fiberboard, Plywood, Etc. (Not Designed For Fiberglass).
Features
- Water Based Acrylic Adhesive - 2 Gallons
- Used for roofing RVs, campers, and trailers Designed to Bond EPDM, PVC, and Hypalon to wood fiberboard, plywood, etc. (not designed for fiberglass)
- Remains flexible to compensate for expansion and contraction of the membrane itself
- COVERAGE: 160-200 sq ft/gal
- Proven to be stronger than leading competitors brands
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon Similar To Class A Customs 2 Gallons
#1
Polar Active Ice 3.0 Cold Therapy Ice Machine System with Programmable Timer, Knee and Joint Compression Pad, Lightweight 16 Quart Cooler, Quiet Pump, Strong Cryotherapy Pain Relief Treatment
Asin: B07H9HPVCY | Model: AIS3.0-15-KB | PartNumber: AIS3.0-15-KB | Ean: 0052062000030 | UPC: 052062000030
Ergonimically Designed Knee 12.5” X 10.5” Therapy Pad With Attached Elastic & Velcro Belts. The Belts Are 2” Wide And 18.5”, 15.5” And 6.5” Long. Excellent Fit And Comfort. Often Recommended By Doctors For Pain Management And To Promote Healing After Knee Surgery..
Warranty: Our 6 Month Manufacturer’S Warranty And Customer Service Oriented Focus Makes The Polar Active Ice Machine A Worry Free Purchase; We Stand Behind Our Product 100% And In The Rare Chance You Experience An Issue, We Will Do Whatever Is Necessary To Make It Right!.
Usa Local: Proudly Designed, Engineered, Tested, And Assembled In Stow, Ohio, Usa; Our Customer Service Is Located At Our Factory In Stow, Ohio And We Answer Our Phones!.
Cold Therapy All Night Long: Our Double Insulated 16 Quart Cooling Reservoir Is Large Enough To Provide Continuous Cold Therapy For Many Hours But Lightweight Enough To Carry; Will Fit 12 Frozen Water Bottles Perfectly; One Load Of Ice And Water Will Last Much Longer Than Other Cyrotherapy Systems; A Larger Cooling Reservoir Means More Ice Which Means A Longer Pain Relief Cold Therapy Duration Between Ice Charges; The Polar Active Ice Machine Provides Cooling That Will Last Through The Night.
Features
- CUSTOM PROGRAMMABLE TIMER: Our patent-pending programmable timer allows you to customize a personalized cooling on and off cycle per your doctor s recommendation; Never worry about the safety concerns of falling asleep with the unit on; Our timer will cycle on and off per your set times for as long as needed; This ensures a safe, convenient and effective cold therapy treatment perfect for post-surgery pain management and relief day or night; Most competitors do not have this important feature
- COLD THERAPY ALL NIGHT LONG: Our double insulated 16 quart cooling reservoir is large enough to provide continuous cold therapy for many hours but lightweight enough to carry; Will fit 12 frozen water bottles perfectly; One load of ice and water will last much longer than other cyrotherapy systems; A larger cooling reservoir means more ice which means a longer pain relief cold therapy duration between ice charges; The Polar Active Ice machine provides cooling that will last through the night
- ERGONIMICALLY DESIGNED KNEE 12.5 x 10.5 THERAPY PAD with attached elastic & Velcro belts. The belts are 2 wide and 18.5 , 15.5 and 6.5 long. Excellent fit and comfort. Often recommended by doctors for pain management and to promote healing after knee surgery.
- USA LOCAL: Proudly designed, engineered, tested, and assembled in Stow, Ohio, USA; Our customer service is located at our factory in Stow, Ohio and we answer our phones!
- WARRANTY: Our 6 month manufacturer s warranty and customer service oriented focus makes the Polar Active Ice machine a worry free purchase; We stand behind our product 100% and in the rare chance you experience an issue, we will do whatever is necessary to make it right!
- See more on Amazon...
Brand: Polar Products | Manufacturer: Polar Products Inc.
Weight: 7.75 Pounds
See On Amazon #2
Svaldo 2 Gallon frosted zipper bags for clothes, 50 Count 14x18 inch Plastic Bags for Clothes, Frosted Zipper Poly Bags for Packaging Sweaters, Hoodies, Women Shoe, Sewing Projects, 3 Mil
Asin: B09K3LSJYV | Model: 560458_05 | PartNumber: 560458_05 | Ean: 0734077892700, 0727156824037, 0727156824044, 6221243296812 | UPC: 727156824044, 734077892700, 727156824037
【Reinforced Sides】Our Frosted Zipper Poly Bags Are Reinforced At The Sideswith Good Durability & Toughness, Better Resist Rips, Splits & Tears To Protect Merchandise During Storaging, Shipping & Mailing..
【Usages】Frosted Film Give An Elegant And Professional Look, A Must Have For Home Organzing, Travel Packaging, Business Shipping Etc. Great For Packaging & Mailing Clothing, T-Shirt, Sweaters, Toys, Shoes, Underwear, Leggings, Tank Tops, Garment, Artwork, Photos, Prints, Files, Cosmetics, Usb Cables, Brochures Etc. Store Everything To Keep Your Life Organized..
【Warning：Air Holes】Plastic Zip Bags For Packaging With Vent Hole Pouches For Air Squeezing To Optimize Space.These Bags Are Breathable To Protect Your Belongings And Prevent Suffocation.If You Want To Buy A Fully Sealed Bag, Please Think Carefully..
【Reclosable Zipper】Our Reclosable Plastic Zip Bags Are Easy To Instantly And Resealably Self Seal With Quality Slider Zipper, Speeding Up Packaging, Shipping & Mailing Operations Without Extra Sealers Or Tape, And They Protect Your Clothes And Belongings From Dust, Odours, Dampness..
Features
- Package 50 pack of 14x18inch Frosted Zipper Poly Packaging Bags, heavy duty 3 Mil thick for single side. Store everything to keep your life organized.
- Reclosable Zipper Our reclosable plastic zip bags are easy to instantly and resealably self seal with quality slider zipper, speeding up packaging, shipping & mailing operations without extra sealers or tape, and they protect your clothes and belongings from dust, odours, dampness.
- Reinforced Sides Our frosted zipper poly bags are reinforced at the sideswith good durability & toughness, better resist rips, splits & tears to protect merchandise during storaging, shipping & mailing.
- Warning Air Holes Plastic zip bags for packaging with vent hole pouches for air squeezing to optimize space.These bags are breathable to protect your belongings and prevent suffocation.If you want to buy a fully sealed bag, please think carefully.
- Usages Frosted film give an elegant and professional look, a must have for home organzing, travel packaging, business shipping etc. Great for packaging & mailing clothing, t-shirt, sweaters, toys, shoes, underwear, leggings, tank tops, garment, artwork, photos, prints, files, cosmetics, usb cables, brochures etc. Store everything to keep your life organized.
- See more on Amazon...
Brand: Svaldo | Manufacturer: Svaldo
See On Amazon #3
Custom Coat Black 2 Gallon (8 Quart) Urethane Spray-On Truck Bed Liner Kit with Spray Gun and Regulator - Easy 3 to 1 Mix Ratio, Just Mix, Shake and Shoot It - Durable Textured Protective Coating
Asin: B00FFIIIY2 | Ean: 0848849091427 | UPC: 848849091427
Custom Coat Was Developed To Provide A Great Looking Durable Yet Flexible Textured Surface And Is A Heavy Duty 2 Part Urethane Coating That Is Easy To Apply. It Provides The Ultimate Surface Protection For Almost Any Application. Unlike Other Protective And Bed Liner Coatings Custom Coat Is A Flexible Material That Will Resist Chipping, While Providing Impact Protection And Abrasion Resistance. These Features And Benefits Make It Perfect For Its Most Popular Application As A Truck Bed Liner..
Easily Achieve Professional Results With Our Diy Custom Coat Kit Packages. Kits Are Available In Various Sizes From 1 Quart To 2 Gallon. Kits Are Also Available With Either A Spray Applicator Gun Or A Paint Roller Application Set. Custom Coat Also Offers Urethane Tint Concentrate In Over 50 Colors, So You Can Choose Either A Single Color Or Use Different Colors To Create Your Own Multi-Colored Custom Look Or Use The Colors That Will Make A Great Camouflage Pattern..
Custom Coat Is A Very Versatile Product That Can Be Used For Endless Amount Of Applications. Use It On Truck Beds, Entire Vehicle Exteriors, Chassis, Bumpers, Commercial Vehicles, Equipment And Trailers. It's Also Great For Home Uses As Non-Skid Coating For Floors Including Garage Floors, Concrete, Wood, Steps, Walkways, Wood Decks, Docks, Bath Tubs, Basement Floors, Walls, Tool Boxes And Engine Compartments..
Custom Coat Truck Bed Liner Is A Premium Durable Long Lasting Textured Protective Coating That Can Tolerate Extreme Climatic Temperature Conditions. It Is Heat, Uv Resistant And Waterproof, So It Protects Coated Surfaces From Rust. Use It To Help Dampen Sounds And Vibrations..
Features
- Professional Custom Coat Spray on Truck Bed Liner 2 Gallon Kit. Kit Includes: 8 - 24 fl. oz. Cans of Black Truck Bed Liner Base, 8 - 8 fl. oz. Cans Custom Coat Standard Hardener, and 1 Custom Coat Applicator Spray Gun with Regulator. Estimated coverage is 110 to 130 square feet @ 10 mils wet film thickness.
- Custom Coat Truck Bed Liner is a premium durable long lasting textured protective coating that can tolerate extreme climatic temperature conditions. It is heat, UV resistant and waterproof, so it protects coated surfaces from rust. Use it to help dampen sounds and vibrations.
- Custom Coat was developed to provide a great looking durable yet flexible textured surface and is a heavy duty 2 part urethane coating that is easy to apply. It provides the ultimate surface protection for almost any application. Unlike other protective and bed liner coatings Custom Coat is a flexible material that will resist chipping, while providing impact protection and abrasion resistance. These features and benefits make it perfect for its most popular application as a truck bed liner.
- Custom Coat is a very versatile product that can be used for endless amount of applications. Use it on truck beds, entire vehicle exteriors, chassis, bumpers, commercial vehicles, equipment and trailers. It's also great for home uses as non-skid coating for floors including garage floors, concrete, wood, steps, walkways, wood decks, docks, bath tubs, basement floors, walls, tool boxes and engine compartments.
- Easily achieve professional results with our DIY Custom Coat Kit Packages. Kits are available in various sizes from 1 quart to 2 gallon. Kits are also available with either a Spray Applicator Gun or a Paint Roller Application Set. Custom Coat also offers Urethane Tint Concentrate in over 50 colors, so you can choose either a single color or use different colors to create your own multi-colored custom look or use the colors that will make a great camouflage pattern.
- See more on Amazon...
Brand: Custom Shop | Manufacturer: Custom Shop
Weight: 20.00 Pounds
See On Amazon #4
The Kombucha Shop, Kombucha Heating Wrap - Heating Pad with Adjustable Temperature Control
Asin: B079NSCT7X | Model: 658751998772 | PartNumber: 658751998772 | Ean: 0658751998772 | UPC: 658751998772
Precise Temperature Control: Four Temperature Settings To Always Keep The Ideal Brew Temperature No Matter The Time Of Year.
Color Options: Available In A Plain Black Version And Our Limited Edition Print. Each Option Includes (1) Adhesive Temperature Gauge To Adhere To The Side Of Your Brewing Vessel.
Adjustable Two Ways: Designed To Expand And Contract To Fit Vessels As Small As 1/2 Gallon And *Some* Jars As Large As 2 Gallons..
Patent Pending Design: Our Unique Design Includes A Built In, Adjustable Hook-And-Loop Strap To Easily And Snugly Fit Your Brewing Vessel.
Features
- CUSTOM MADE FOR KOMBUCHA: We created this custom designed wrap exclusively for kombucha home fermentation. Everything from the fit, the temperature settings, the wattage and special size. It is the perfect solution to safely keeping your kombucha in the correct temperature range
- PATENT PENDING DESIGN: Our unique design includes a built in, adjustable hook-and-loop strap to easily and snugly fit your brewing vessel
- PRECISE TEMPERATURE CONTROL: Four temperature settings to always keep the ideal brew temperature no matter the time of year
- ADJUSTABLE TWO WAYS: Designed to expand and contract to fit vessels as small as 1/2 gallon and *some* jars as large as 2 gallons.
- COLOR OPTIONS: Available in a Plain Black version and our Limited Edition Print. Each option includes (1) Adhesive Temperature Gauge to adhere to the side of your brewing vessel
- See more on Amazon...
Brand: The Kombucha Shop
See On Amazon #5
Class A Customs 9.5 ft TPO RV Rubber Roof Kit | 30 ft Long Complete Roof Kit | Motor Home Roof | Camper Roof | Trailer Rubber Membrane and Glue Roofing Kit
Asin: B01MTO1ZU1 | Model: 1725-ISK-WH | PartNumber: 1725-ISK-WH | Ean: 0808890309728 | UPC: 808890309728
4 Rolls Of Putty Tape (1/8" (Thick) X 3/4" W X 30' L).
**Item Ships Folded In A Box - It Is Recommend That You Remove It From The Box As Soon As You Receive It. Lay It Flat And Allow It To "Relax" For Several Hours Before Installing, This Will Allow The Temporary Creases That May Have Been Caused By Folding To Come Out As The Item "Rests". **.
2 Gallons Of Classacustoms Water Based Acrylic Rubber Roof Adhesive.
5 Tubes Of Heng's Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 30 Feet of classAcustoms TPO Membrane by 9 1/2 feet
- 5 tubes of Heng's Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- 4 Rolls of Putty Tape (1/8 (thick) x 3/4 W x 30' L)
- 2 Gallons of classAcustoms Water Based Acrylic Rubber Roof Adhesive
- **ITEM SHIPS folded in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to relax for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item rests. **
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
See On Amazon #6
Class A Customs | T-5000 | 50 Gallon Fresh Water Holding Tank RV and Concession
Asin: B0B2KPDCZW | Model: T-5000 | PartNumber: T-5000
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 38.25” Longest Length (Not Including Fittings) X 14.25” X 22.25”- Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 50 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 38.25 Longest Length (not including fittings) x 14.25 x 22.25 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 22.00 x 38.00 x 14.00 inches
Warranty: 1 year from date of purchase against any manufacturing defects. Warranty will be replacement only!
See On Amazon #7
Custom Shop - Gray Epoxy Primer/Sealer 2.1 VOC (Gallon Kit) Anti-Corrosive DTM High-Performance Primer for Automotive and Industrial use Kit = 2 Qt. Epoxy Primer + 2 Qt. Epoxy Hardener (1-1 Mix)
Asin: B07NXWF5BV | Ean: 0848849098204 | UPC: 848849098204
Custom Shop – Kep Series Epoxy Primer Is Great As A Dtm Primer But Also Can Be Used As An Excellent Sealer For All Single Stage Urethane And Basecoat Clearcoat. If Used As A Sealer Add 1/2 Part Of Xr70 Or Ur70 Reducer, Topcoat Or Basecoat Can Be Applied In 30 Minutes. Using Kep Allows For Excellent Topcoat Gloss Holdout..
Lays Down Super Smooth With An Easy ( 1 Part To 1 Part ) Mixing Ratio Allows For More Precise Mixing, No Induction Time Needed Before Application. Pot Life Is 4 Hours Once Mixed. Custom Shop – Kep Series Anti-Corrosive Epoxy Primer Is A 2.1 Voc Lbs/Gallon Product That Can Be Used Coast To Coast..
Available In Gray, Black And White In 1 Quart Kits, 2 Quart Kits, Gallon Kits And 2 Gallon Kits. Great For Automotive And Industrial Applications. Kep Is Compatible With And Can Be Top Coated With Most Automotive Paint Brands Like Custom Shop, Restoration Shop, Ppg, House Of Kolor, Valspar, Etc..
Kep Epoxy Primer Is Lead And Chromate Free And Its Formulation Contains A Rich Blend Of Anti-Corrosive Additives To Achieve Maximum Defense Against Rust And Corrosion. It Also Offers Excellent Salt Spray Resistance And Is A Fast Dry Product..
Features
- Custom Shop KEP Series Anti-Corrosive Epoxy Primer / Sealer is a 1 to 1 Mix Ratio high performance primer specifically designed to be used DTM (Direct to Metal). KEP Series Primer contains an advanced resin technology system that offers superior adhesion to Bare Metal, Steel, Bare Aluminum, Fiberglass, Gelcoat. Body Fillers and most properly prepared Rigid Plastics and sanded OEM Finishes.
- KEP Epoxy Primer is Lead and Chromate Free and its formulation contains a rich blend of Anti-Corrosive additives to achieve maximum defense against rust and corrosion. It also offers excellent salt spray resistance and is a fast dry product.
- Custom Shop KEP Series Epoxy Primer is great as a DTM primer but also can be used as an excellent sealer for all single stage Urethane and Basecoat Clearcoat. If used as a sealer add 1/2 part of XR70 or UR70 reducer, topcoat or basecoat can be applied in 30 minutes. Using KEP allows for excellent topcoat gloss holdout.
- Available in Gray, Black and White in 1 quart kits, 2 quart kits, gallon kits and 2 gallon kits. Great for Automotive and Industrial applications. KEP is compatible with and can be top coated with most Automotive Paint brands like Custom Shop, Restoration Shop, PPG, House of Kolor, Valspar, etc.
- Lays down super smooth with an Easy ( 1 part to 1 part ) Mixing Ratio allows for more precise mixing, no induction time needed before application. Pot life is 4 hours once mixed. Custom Shop KEP Series Anti-Corrosive Epoxy Primer is a 2.1 VOC lbs/gallon product that can be used coast to coast.
- See more on Amazon...
Brand: Custom Shop | Manufacturer: Custom Shop
See On Amazon #8
Class A Customs | RV Fresh and Gray Water Tank | Combo Pack (30 Gallon & 46 Gallon) | RV Water Holding Tanks
Asin: B085FT3CLS | Ean: 7426933332170
30 And 46 Gallon Each Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
46 Gallon Tank Measurements 42” X 14” X 18” -Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
30 Gallon Tank Measurements 34.5” X 12” X 17.5” -Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Features
- Combo Pack (ONE) 30 Gallon & (ONE) 46 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- 30 and 46 GALLON EACH TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- 30 GALLON TANK MEASUREMENTS 34.5 x 12 x 17.5 -Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- 46 GALLON TANK MEASUREMENTS 42 x 14 x 18 -Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #9
U-Pol Raptor 8 Quart Kit - Black Urethane Spray-On Truck Bed Liner Kit with Custom Coat Spray Gun with Regulator - Bonus 2 Bedliner Aerosol Cans
Asin: B07RM95PN1 | Ean: 0848849074086 | UPC: 848849074086
Abrasion And Stain Resistant.
Waterproof Flexible Helps Deaden Sound & Vibrations.
Protects Against Rust Corrosion Salt Damp & Extreme Temperatures.
Custom Coat Bedliner Spray Gun Features Adjustable Nozzle And Includes Regulator And Gauge.
Features
- Easy to use: Add hardener - Shake - Spray
- Custom Coat Bedliner Spray Gun features adjustable nozzle and includes Regulator and Gauge
- Abrasion and Stain Resistant
- Protects against rust corrosion salt damp & extreme temperatures
- Waterproof flexible helps deaden sound & vibrations
- See more on Amazon...
Brand: Custom Shop | Manufacturer: Custom Shop
See On Amazon #10
Class A Customs | T-5500 | 55 Gallon Fresh Water Holding Tank
Asin: B07XTH6D29 | Ean: 7426933331326
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 37.5” Longest Length (Not Including Fittings) X 17.5” X 19.5”- Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 55 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 37.5 Longest Length (not including fittings) x 17.5 x 19.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
See On Amazon #11
Class A Customs | T-2000-BPK| 20 Gallon Fresh Water Tank & Plumbing Kit RV Concession
Asin: B07JGBXG2Q | Model: T-2000 | PartNumber: T-2000 | Ean: 7426933334068
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Basic Plumbing Kit Includes - (Two) 0.5” Hose Barb To 0.5” Male Pipe Thread Adaptor (Four) 0.5” Hose Clamp (One) 1.25” Hose Barb To 1.5” Male Pipe Thread Adaptor (Two) 1.5” Hose Clamps (One) 1.5” Male Pipe Thread Pvc Male Adaptor (One) 5Ft. Section Of 0.5” Id Vent/Draw Hose (One) 5Ft. Section Of 1.25” Id (1.375” Od) Fill Hose.
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 32 1/2" Longest Length (Not Including Fittings) X 11 3/4” X 11 3/4” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 32 1/2 Longest Length (not including fittings) x 11 3/4 x 11 3/4 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5 Hose Barb to 0.5 Male Pipe Thread Adaptor (FOUR) 0.5 Hose Clamp (ONE) 1.25 Hose Barb to 1.5 Male Pipe Thread Adaptor (TWO) 1.5 Hose Clamps (ONE) 1.5 Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5 ID Vent/Draw Hose (ONE) 5ft. Section of 1.25 ID (1.375 OD) Fill Hose
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 11.75 x 32.50 x 11.75 inches | Weight: 30.00 pounds
See On Amazon #12
Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession
Asin: B07JD24ZVQ | Model: T-3000-1 | PartNumber: T-3000-1 | Ean: 7426933334105
Tank Built-In Fittings: (Two) 1.5" Female Npt Fitting - Fitting Is Sealed And Watertight, To Use Remove Membrane With Razor Knife (Two) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Basic Plumbing Kit Includes - (Two) 0.5” Hose Barb To 0.5” Male Pipe Thread Adaptor (Four) 0.5” Hose Clamp (One) 1.25” Hose Barb To 1.5” Male Pipe Thread Adaptor (Two) 1.5” Hose Clamps (One) 1.5” Male Pipe Thread Pvc Male Adaptor (One) 5Ft. Section Of 0.5” Id Vent/Draw Hose (One) 5Ft. Section Of 1.25” Id (1.375” Od) Fill Hose.
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 34 1/2” Longest Length (Not Including Fittings) X 12” X 17 1/2” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 34 1/2 Longest Length (not including fittings) x 12 x 17 1/2 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5 Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5 Hose Barb to 0.5 Male Pipe Thread Adaptor (FOUR) 0.5 Hose Clamp (ONE) 1.25 Hose Barb to 1.5 Male Pipe Thread Adaptor (TWO) 1.5 Hose Clamps (ONE) 1.5 Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5 ID Vent/Draw Hose (ONE) 5ft. Section of 1.25 ID (1.375 OD) Fill Hose
- See more on Amazon...
Brand: classAcustoms | Manufacturer: Class A Customs
Dimensions: 12.00 x 34.50 x 17.50 inches
See On Amazon #13
Epoxy Resin 2 Gallon Kit | 1:1 Crystal Clear Resin and Hardener for Super Gloss Coating | for Bars, Tabletop, Art, Jewelry, Casting Molds | Safe for Use on Wood, Metal, Stone, Plastic, Marine Sealer
Asin: B00V2GDCVU | Model: CCER2 | PartNumber: CCER2 | Ean: 0638865869557 | UPC: 638865869557
Uv, Scratch And Water-Resistant - We're Committed To The Highest Quality Engineering And Production Standards. Our Dedicated Research & Development Team Has Meticulously Perfected The East Coast Resin Epoxy Formula For Superior Uv-Resistance, Scratch-Resistance, And Moisture-Resistance When Compared To Other Industry Brands..
Extra Easy To Apply - With East Coast Resin Epoxy, You Don't Have To Be A Pro To Achieve Professional Results The Very First Time! Our Smooth-Coating Resin & Hardener Kit Is Straightforward And Easy To Apply - Even As A First-Time Novice Or Beginner Hobbyist. Detailed Instructions Are Included With Each Kit..
Safe And Odorless - Surfaces Coated With Our Premium Epoxy Are 100% Safe For Food To Touch, And Durably Maintain Their Structural Integrity Over Time Without Breaking Down Or Leaching Chemicals. Our Odorless Formula Requires No Mask And Makes It Easy To Breathe And Work In Comfort All Day Long..
Custom Diy Projects, Artwork, Surfaces - Create Customized Works Of One-Of-A-Kind Artisan Craftsmanship. Perfect For Diy Projects, Countertops, Bar Tops, Tabletops, River Tables, Jewelry, Vehicle Surface Sealing, Coffee Tables, Arts & Crafts And Nearly Endless Creative Possibilities!.
Features
- FLAWLESS CRYSTAL CLEAR COATING - Achieve crystal clear, flawlessly transparent epoxy coatings with our ultra high performance resin and hardener kit! This premium professional grade epoxy goes on smooth and dries evenly to eliminate crawling, trickling, craters and "fish eyes".
- CUSTOM DIY PROJECTS, ARTWORK, SURFACES - Create customized works of one-of-a-kind artisan craftsmanship. Perfect for DIY projects, countertops, bar tops, tabletops, river tables, jewelry, vehicle surface sealing, coffee tables, arts & crafts and nearly endless creative possibilities!
- UV, SCRATCH AND WATER-RESISTANT - We're committed to the highest quality engineering and production standards. Our dedicated research & development team has meticulously perfected the East Coast Resin epoxy formula for superior UV-resistance, scratch-resistance, and moisture-resistance when compared to other industry brands.
- SAFE AND ODORLESS - Surfaces coated with our premium epoxy are 100% safe for food to touch, and durably maintain their structural integrity over time without breaking down or leaching chemicals. Our odorless formula requires no mask and makes it easy to breathe and work in comfort all day long.
- EXTRA EASY TO APPLY - With East Coast Resin epoxy, you don't have to be a pro to achieve professional results the very first time! Our smooth-coating resin & hardener kit is straightforward and easy to apply - even as a first-time novice or beginner hobbyist. Detailed instructions are included with each kit.
- See more on Amazon...
Brand: East Coast Resin | Manufacturer: East Coast Resin
Dimensions: 12.00 x 6.00 x 6.00 inches | Weight: 18.50 Pounds
See On Amazon #14
Class A Customs EPDM Kit | 9.5 ft Wide X 40 ft Long | RV Rubber Roof Kit | RV Camper Trailer Rubber Roof Repair | Membrane Glue and Caulk
Asin: B0BGT5PLD3 | Model: CACEPDM95X40K | PartNumber: CACEPDM95X40K
Kit Includes 4 Rolls Of Putty Tape (1/8" Thick X 3/4" W X 30' L) Non-Hardening, Pliable Putty Tape. - Color Gray.
**Item Ships Folding In A Box - It Is Recommend That You Remove It From The Box As Soon As You Receive It. Lay It Flat And Allow It To "Relax" For Several Hours Before Installing, This Will Allow The Temporary Creases That May Have Been Caused By Folding To Come Out As The Item "Rests". **.
2 Gallons Of Acrylic Rubber Roof Adhesive (Water Based)).
5 Tubes Of Classacustoms Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 40 Foot Long by 9.5 Foot Wide classAcustoms Single-Ply EPDM RV Roofing Membrane Kit - classAcustoms EPDM Membrane is 32 mils / 0.8mm thick Smooth & Textured/Patterned Sides - Color is White throughout - It is recommended to get a length that is longer / wider than your unit due to possible curve of the roof, raised or lowered areas, removing the excess is much better than not having enough
- 5 Tubes of classAcustoms Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- KIT INCLUDES 4 Rolls of Putty Tape (1/8 Thick x 3/4 W x 30' L) Non-hardening, pliable putty tape. - COLOR Gray
- 2 Gallons of Acrylic Rubber Roof Adhesive (Water Based))
- **ITEM SHIPS folding in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to relax for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item rests. **
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
Warranty: 10 years from date of purchase against any manufacturer defects
See On Amazon #15
Class A Customs | T-3000-SP | One (1) Spouted 30 Gallon RV Fresh and Gray Water Holding Tank RV Concession
Asin: B07KYSQJP8 | Model: T-3000-1 | PartNumber: T-3000-1 | Ean: 7426933333733
Tank Built-In Fittings: (One) 1.25" Outer Diameter X 2" Long Boss Fitting (Smooth Pipe / Spout) Fitting Is Open And Glue Does Not Stick To Pipe, Hose With Clamp Needed (Three) .5" Female Npt Fitting - Fitting Is Open Do Not Over-Tighten Fitting Damage Will Occur, Use Plastic Connecting Fittings As Metal Will Damage Threads..
Great Extra Water Storage In Rv, Pop-Up Camper, Off-Road Vehicles, Concession Trailers, Hot Dog Carts, Smaller Food Vendors And Portable Hand Washing Sinks. Class A Customs Manufactures This Item In The Usa In Elkhart, Indiana. Tanks Are Made In A Warehouse Clean Each Tank Prior To Use To Remove Any Debris, Scuffs Or Marking From The Manufacturing Process..
Non-Pressurized Tank: Tank Must Be Vented Allowing Air In And Out During Use. Do Not Make A Sealed Connection With A Garden Hose Directly To Tank, This Is A Pressurized Connection And Will Cause Tank To Explode Causing Damage. For Filling Tank It Is Recommended To Use A Fill Dish Or Other Gravity Process..
Water Tank Measurements: 34 1/2” Longest Length (Not Including Fittings) X 12” X 17 1/2” - Tank Can Sit On Any Side - Rotate Tank To Change Height Or Width Average Thickness 7/32” +/- Please View Photos. (Due To The Manufacturing Process +/- .25" On Each Measurement).
Features
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 34 1/2 Longest Length (not including fittings) x 12 x 17 1/2 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32 +/- Please view photos. (Due to the manufacturing process +/- .25 on each measurement)
- TANK BUILT-IN FITTINGS: (ONE) 1.25 Outer Diameter x 2 Long Boss Fitting (Smooth Pipe / Spout) fitting is open and glue does not stick to pipe, hose with clamp needed (THREE) .5 Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classAcustoms.com
Dimensions: 12.00 x 34.50 x 17.50 inches | Weight: 18.00 Pounds
See On Amazon #16
Custom Coat Shoreline Beige 2 Gallon (8 Quart) Urethane Spray-On Truck Bed Liner Kit with Spray Gun and Regulator - Easy Mixing, Shake, Shoot - Textured Protective Coating, Prevent Rust - Car, Auto
Asin: B00FFIIZE0 | Ean: 0848849026436 | UPC: 848849026436
Custom Coat Was Developed To Provide A Great Looking Durable Yet Flexible Textured Surface And Is A Heavy Duty 2 Part Urethane Coating That Is Easy To Apply. It Provides The Ultimate Surface Protection For Almost Any Application. Unlike Other Protective And Bed Liner Coatings Custom Coat Is A Flexible Material That Will Resist Chipping, While Providing Impact Protection And Abrasion Resistance. These Features And Benefits Make It Perfect For Its Most Popular Application As A Truck Bed Liner..
Easily Achieve Professional Results With Our Diy Custom Coat Kit Packages. Kits Are Available In Various Sizes From 1 Quart To 2 Gallon. Kits Are Also Available With Either A Spray Applicator Gun Or A Paint Roller Application Set. Custom Coat Also Offers Urethane Tint Concentrate In Over 50 Colors, So You Can Choose Either A Single Color Or Use Different Colors To Create Your Own Multi-Colored Custom Look Or Use The Colors That Will Make A Great Camouflage Pattern..
Custom Coat Is A Very Versatile Product That Can Be Used For Endless Amount Of Applications. Use It On Truck Beds, Entire Vehicle Exteriors, Chassis, Bumpers, Commercial Vehicles, Equipment And Trailers. It's Also Great For Home Uses As Non-Skid Coating For Floors Including Garage Floors, Concrete, Wood, Steps, Walkways, Wood Decks, Docks, Bath Tubs, Basement Floors, Walls, Tool Boxes And Engine Compartments..
Custom Coat Truck Bed Liner Is A Premium Durable Long Lasting Textured Protective Coating That Can Tolerate Extreme Climatic Temperature Conditions. It Is Heat, Uv Resistant And Waterproof, So It Protects Coated Surfaces From Rust. Use It To Help Dampen Sounds And Vibrations..
Features
- Professional Custom Coat Spray-On Truck Bed Liner 2 Gallon Kit. Custom Tintable Color Kit Includes: 8 - 21 fl. oz. Cans of Tintable Truck Bed Liner Base, 8 - 8 fl. oz. Cans Custom Coat Standard Hardener, 8 - 3 fl. oz. Bottles of Custom Shop Basecoat Color Tint and 1 Custom Coat Applicator Spray Gun with Regulator. Estimated coverage is 110 to 130 square feet @ 10 mils wet film thickness.
- Custom Coat Truck Bed Liner is a premium durable long lasting textured protective coating that can tolerate extreme climatic temperature conditions. It is heat, UV resistant and waterproof, so it protects coated surfaces from rust. Use it to help dampen sounds and vibrations.
- Custom Coat was developed to provide a great looking durable yet flexible textured surface and is a heavy duty 2 part urethane coating that is easy to apply. It provides the ultimate surface protection for almost any application. Unlike other protective and bed liner coatings Custom Coat is a flexible material that will resist chipping, while providing impact protection and abrasion resistance. These features and benefits make it perfect for its most popular application as a truck bed liner.
- Custom Coat is a very versatile product that can be used for endless amount of applications. Use it on truck beds, entire vehicle exteriors, chassis, bumpers, commercial vehicles, equipment and trailers. It's also great for home uses as non-skid coating for floors including garage floors, concrete, wood, steps, walkways, wood decks, docks, bath tubs, basement floors, walls, tool boxes and engine compartments.
- Easily achieve professional results with our DIY Custom Coat Kit Packages. Kits are available in various sizes from 1 quart to 2 gallon. Kits are also available with either a Spray Applicator Gun or a Paint Roller Application Set. Custom Coat also offers Urethane Tint Concentrate in over 50 colors, so you can choose either a single color or use different colors to create your own multi-colored custom look or use the colors that will make a great camouflage pattern.
- See more on Amazon...
Brand: Custom Shop | Manufacturer: Custom Shop
Weight: 34.00 Pounds
See On Amazon #17
Class A Customs EPDM Kit | 8.5 ft Wide X 30 ft Long | RV Rubber Roof Kit | RV Camper Trailer Rubber Roof Repair | Membrane Glue and Caulk
Asin: B0BGT26TRQ | Model: CACEPDM85X30K | PartNumber: CACEPDM85X30K
Kit Includes 4 Rolls Of Putty Tape (1/8" Thick X 3/4" W X 30' L) Non-Hardening, Pliable Putty Tape. - Color Gray.
**Item Ships Folding In A Box - It Is Recommend That You Remove It From The Box As Soon As You Receive It. Lay It Flat And Allow It To "Relax" For Several Hours Before Installing, This Will Allow The Temporary Creases That May Have Been Caused By Folding To Come Out As The Item "Rests". **.
2 Gallons Of Acrylic Rubber Roof Adhesive (Water Based)).
5 Tubes Of Classacustoms Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 30 Foot Long by 8.5 Foot Wide classAcustoms Single-Ply EPDM RV Roofing Membrane Kit - classAcustoms EPDM Membrane is 32 mils / 0.8mm thick Smooth & Textured/Patterned Sides - Color is White throughout - It is recommended to get a length that is longer / wider than your unit due to possible curve of the roof, raised or lowered areas, removing the excess is much better than not having enough
- 5 Tubes of classAcustoms Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- KIT INCLUDES 4 Rolls of Putty Tape (1/8 Thick x 3/4 W x 30' L) Non-hardening, pliable putty tape. - COLOR Gray
- 2 Gallons of Acrylic Rubber Roof Adhesive (Water Based))
- **ITEM SHIPS folding in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to relax for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item rests. **
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
Warranty: 10 years from date of purchase against any manufacturer defects
See On Amazon #18
iTouchless 13.2 Gallon Step Trash Can with Odor Control System Stainless Steel, Semi-Round, 50 Liter Garbage Bin for Kitchen, Office, Home-Silent and Gentle Open/Close, Space Saving, SoftStep 13 Gal
Asin: B07VXKH7WR | Model: PC13DDS | PartNumber: PC13DDS | Ean: 0814839023242 | UPC: 814839023242
Beautiful Commercial Grade Stainless Steel – Elegant, Fingerprint-Proof, Smudge-Resistant Commercial Grade Stainless Steel Is Easy To Clean. Complements Any Kitchen Or Office Décor.
Built To Last – Sturdy, Large Steel Pedal Is Designed To Last Over 200, 000 Steps – That’S More Than 20 Steps A Day For Over 25 Years!.
Odor Control System – 1 Absorb Odor Filter Is Included. Absorb Filter Absorbs & Neutralizes Odors The Natural Way For Up To 3 Months. For A Fresh & Clean Smelling Home.
Gentle & Silent Lid Close – Durable, Ergonomic Pedal Requires Minimal Force To Open; Easy To Replace Air Damper For Years Of Like-New Performance.
Features
- UNCONDITIONAL PROMISE Your 100% satisfaction is assured and backed by a Full-Service Manufacturer's Promise including Parts and Dedicated Customer Support.
- GENTLE & SILENT LID CLOSE Durable, ergonomic pedal requires minimal force to open; easy to replace air damper for years of like-new performance
- BEAUTIFUL COMMERCIAL GRADE STAINLESS STEEL Elegant, fingerprint-proof, smudge-resistant Commercial Grade Stainless Steel is easy to clean. Complements any kitchen or office d cor
- ODOR CONTROL SYSTEM 1 Absorb Odor Filter is included. Absorb filter absorbs & neutralizes odors the natural way for up to 3 months. For a fresh & clean smelling home
- BUILT TO LAST Sturdy, large steel pedal is designed to last over 200, 000 steps that s more than 20 steps a day for over 25 years!
- See more on Amazon...
Brand: iTouchless | Manufacturer: iTouchless
Dimensions: 26.00 x 19.00 x 15.00 inches | Weight: 13.29 Pounds
See On Amazon #19
Custom Coat Federal Standard Color # 34094 Olive Drab T70 Urethane Spray-On Truck Bed Liner, 2 Gallon Kit with Spray Gun and Regulator - Durable Textured Protective Coating - Easy Mix Car Auto
Asin: B07JNQLT3F | Ean: 0845927057467 | UPC: 845927057467
Custom Coat Was Developed To Provide A Great Looking Durable Yet Flexible Textured Surface And Is A Heavy Duty 2 Part Urethane Coating That Is Easy To Apply. It Provides The Ultimate Surface Protection For Almost Any Application. Unlike Other Protective And Bed Liner Coatings Custom Coat Is A Flexible Material That Will Resist Chipping, While Providing Impact Protection And Abrasion Resistance. These Features And Benefits Make It Perfect For Its Most Popular Application As A Truck Bed Liner..
Easily Achieve Professional Results With Our Diy Custom Coat Kit Packages. Kits Are Available In Various Sizes From 1 Quart To 2 Gallon. Kits Are Also Available With Either A Spray Applicator Gun Or A Paint Roller Application Set. Custom Coat Also Offers Urethane Tint Concentrate In Over 50 Colors, So You Can Choose Either A Single Color Or Use Different Colors To Create Your Own Multi-Colored Custom Look Or Use The Colors That Will Make A Great Camouflage Pattern..
Custom Coat Is A Very Versatile Product That Can Be Used For Endless Amount Of Applications. Use It On Truck Beds, Entire Vehicle Exteriors, Chassis, Bumpers, Commercial Vehicles, Equipment And Trailers. It's Also Great For Home Uses As Non-Skid Coating For Floors Including Garage Floors, Concrete, Wood, Steps, Walkways, Wood Decks, Docks, Bath Tubs, Basement Floors, Walls, Tool Boxes And Engine Compartments..
Custom Coat Truck Bed Liner Is A Premium Durable Long Lasting Textured Protective Coating That Can Tolerate Extreme Climatic Temperature Conditions. It Is Heat, Uv Resistant And Waterproof, So It Protects Coated Surfaces From Rust. Use It To Help Dampen Sounds And Vibrations..
Features
- Professional Custom Coat Spray-On Truck Bed Liner 2 Gallon Kit. Custom Tintable Color Kit Includes: 8 - 21 fl. oz. Cans of Tintable Truck Bed Liner Base, 8 - 8 fl. oz. Cans Custom Coat Standard Hardener, 8 - 3 fl. oz. Bottles of Custom Shop Basecoat Color Tint and 1 Custom Coat Applicator Spray Gun with Regulator. Estimated coverage is 110 to 130 square feet @ 10 mils wet film thickness.
- Custom Coat Truck Bed Liner is a premium durable long lasting textured protective coating that can tolerate extreme climatic temperature conditions. It is heat, UV resistant and waterproof, so it protects coated surfaces from rust. Use it to help dampen sounds and vibrations.
- Custom Coat was developed to provide a great looking durable yet flexible textured surface and is a heavy duty 2 part urethane coating that is easy to apply. It provides the ultimate surface protection for almost any application. Unlike other protective and bed liner coatings Custom Coat is a flexible material that will resist chipping, while providing impact protection and abrasion resistance. These features and benefits make it perfect for its most popular application as a truck bed liner.
- Custom Coat is a very versatile product that can be used for endless amount of applications. Use it on truck beds, entire vehicle exteriors, chassis, bumpers, commercial vehicles, equipment and trailers. It's also great for home uses as non-skid coating for floors including garage floors, concrete, wood, steps, walkways, wood decks, docks, bath tubs, basement floors, walls, tool boxes and engine compartments.
- Easily achieve professional results with our DIY Custom Coat Kit Packages. Kits are available in various sizes from 1 quart to 2 gallon. Kits are also available with either a Spray Applicator Gun or a Paint Roller Application Set. Custom Coat also offers Urethane Tint Concentrate in over 50 colors, so you can choose either a single color or use different colors to create your own multi-colored custom look or use the colors that will make a great camouflage pattern.
- See more on Amazon...
Brand: Custom Shop | Manufacturer: Custom Shop
See On Amazon #20
Custom Coat Federal Standard Color # 33446 Desert Tan T80 Urethane Spray-On Truck Bed Liner, 2 Gallon Kit with Spray Gun and Regulator - Durable Textured Protective Coating - Easy Mix Car Auto
Asin: B07JNV61RV | Ean: 0845927058266 | UPC: 845927058266
Custom Coat Was Developed To Provide A Great Looking Durable Yet Flexible Textured Surface And Is A Heavy Duty 2 Part Urethane Coating That Is Easy To Apply. It Provides The Ultimate Surface Protection For Almost Any Application. Unlike Other Protective And Bed Liner Coatings Custom Coat Is A Flexible Material That Will Resist Chipping, While Providing Impact Protection And Abrasion Resistance. These Features And Benefits Make It Perfect For Its Most Popular Application As A Truck Bed Liner..
Easily Achieve Professional Results With Our Diy Custom Coat Kit Packages. Kits Are Available In Various Sizes From 1 Quart To 2 Gallon. Kits Are Also Available With Either A Spray Applicator Gun Or A Paint Roller Application Set. Custom Coat Also Offers Urethane Tint Concentrate In Over 50 Colors, So You Can Choose Either A Single Color Or Use Different Colors To Create Your Own Multi-Colored Custom Look Or Use The Colors That Will Make A Great Camouflage Pattern..
Custom Coat Is A Very Versatile Product That Can Be Used For Endless Amount Of Applications. Use It On Truck Beds, Entire Vehicle Exteriors, Chassis, Bumpers, Commercial Vehicles, Equipment And Trailers. It's Also Great For Home Uses As Non-Skid Coating For Floors Including Garage Floors, Concrete, Wood, Steps, Walkways, Wood Decks, Docks, Bath Tubs, Basement Floors, Walls, Tool Boxes And Engine Compartments..
Custom Coat Truck Bed Liner Is A Premium Durable Long Lasting Textured Protective Coating That Can Tolerate Extreme Climatic Temperature Conditions. It Is Heat, Uv Resistant And Waterproof, So It Protects Coated Surfaces From Rust. Use It To Help Dampen Sounds And Vibrations..
Features
- Professional Custom Coat Spray-On Truck Bed Liner 2 Gallon Kit. Custom Tintable Color Kit Includes: 8 - 21 fl. oz. Cans of Tintable Truck Bed Liner Base, 8 - 8 fl. oz. Cans Custom Coat Standard Hardener, 8 - 3 fl. oz. Bottles of Custom Shop Basecoat Color Tint and 1 Custom Coat Applicator Spray Gun with Regulator. Estimated coverage is 110 to 130 square feet @ 10 mils wet film thickness.
- Custom Coat Truck Bed Liner is a premium durable long lasting textured protective coating that can tolerate extreme climatic temperature conditions. It is heat, UV resistant and waterproof, so it protects coated surfaces from rust. Use it to help dampen sounds and vibrations.
- Custom Coat was developed to provide a great looking durable yet flexible textured surface and is a heavy duty 2 part urethane coating that is easy to apply. It provides the ultimate surface protection for almost any application. Unlike other protective and bed liner coatings Custom Coat is a flexible material that will resist chipping, while providing impact protection and abrasion resistance. These features and benefits make it perfect for its most popular application as a truck bed liner.
- Custom Coat is a very versatile product that can be used for endless amount of applications. Use it on truck beds, entire vehicle exteriors, chassis, bumpers, commercial vehicles, equipment and trailers. It's also great for home uses as non-skid coating for floors including garage floors, concrete, wood, steps, walkways, wood decks, docks, bath tubs, basement floors, walls, tool boxes and engine compartments.
- Easily achieve professional results with our DIY Custom Coat Kit Packages. Kits are available in various sizes from 1 quart to 2 gallon. Kits are also available with either a Spray Applicator Gun or a Paint Roller Application Set. Custom Coat also offers Urethane Tint Concentrate in over 50 colors, so you can choose either a single color or use different colors to create your own multi-colored custom look or use the colors that will make a great camouflage pattern.
- See more on Amazon...
Brand: Custom Shop | Manufacturer: Custom Shop
See On Amazon
Looking For Something Else?
Search