ADS1115 16 Bit 4 Channel I2C IIC, MELIFE 2.0V to 5.5V Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision ADC Converter Development Board.
Asin: B08HLWLR77 | Model: 5598279 | PartNumber: 5598279 | Ean: 0701715448605 | UPC: 701715448605
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Continuous Mode: Only 150Ua Is Easy To Implement, Single Mode: Auto Power Off Function, Onboard Reference And Oscillator..
The Ads1115 Is Measured At High Resolution And Has An Input Multiplexer (Mux) That Provides Two Programmble Conparator Differentials Or Four Single-Ended Input; Four Single-Ended Or ±256Mv, Allowing Both Large And Small Signals To Be The Differential Input..
Especially A Good Tool, There Is No Analog Gpio Pin; Easy To Use I2c Adc Converter, With Programmable Gain Amplifier..
Wide Voltage Supply Range: 2.0V To 5.5V, Operate In A Comparator Mode Which Is Helpful For Maintaining Accuracy..
Features
- High precision ADS1115 16 Bit 4 Channel Analog-to-Digital ADC Converter.
- Wide Voltage Supply Range: 2.0V to 5.5V, operate in a comparator mode which is helpful for maintaining accuracy.
- Continuous mode: Only 150uA is easy to implement, single mode: auto power off function, onboard reference and oscillator.
- Especially a good tool, there is no analog GPIO pin; Easy to use I2C ADC Converter, with Programmable Gain Amplifier.
- The ADS1115 is measured at high resolution and has an input multiplexer (MUX) that provides two programmble conparator differentials or four single-ended input; Four single-ended or 256mV, allowing both large and small signals to be the differential input.
- See more on Amazon...
Brand: MELIFE | Manufacturer: MELIFE
See On Amazon Similar To ADS1115 16 Bit 4 Channel
#1
High-Precision AD HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/W/Zero WH Jetson Nano Expansion Board with ADS1263 10-Channel 32-bit High Precision ADC 24-bit Auxiliary ADC
Asin: B08SK39194 | Model: High-Precision AD HAT Board | PartNumber: High-Precision AD HAT Board | Ean: 0717186096597 | UPC: 717186096597
Onboard Ad Screw Terminal Input, Allows Connecting Analog Signal And Analog Power Supply, General Purpose Interface.
Three-Wire Rtd (Resistor Temperature Detector) Circuit, Enabled By Soldering 0R Resistor.
Onboard Control Header, Make It Easy To Control The Module By Other Hosts In Additional To Raspberry Pi.
Onboard Ad Header Input, Compatible With Waveshare Sensor Pinout, For Connecting Sorts Of Sensor Modules.
Features
- Adopts ADS1263 chip, low noise, low temperature drift, 10-ch 32-bit high precision ADC (5-ch differential input), 38.4kSPS Max sampling rate with embedded 24-bit auxiliary ADC, internal ADC test signal, IDAC, 2.5V internal reference voltage, 8x multiplexing GPIO, PGA (32 times Max)
- Onboard AD header input, compatible with Waveshare sensor pinout, for connecting sorts of sensor modules
- Onboard AD screw terminal input, allows connecting analog signal and analog power supply, general purpose interface
- Onboard control header, make it easy to control the module by other hosts in additional to Raspberry Pi
- Three-wire RTD (resistor temperature detector) circuit, enabled by soldering 0R resistor
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
Weight: 0.04 Pounds
See On Amazon #2
Ferwooh 2PCS ADS1115 Analog-to-Digital Converter 16 Bit 4 Channel I2C IIC Module Converter with Programmable Gain Amplifier Converter Development for Arduino for Raspberry Pi DIY
Asin: B0CYZFFXT7
【Low Current Consumption】 The Supply Current Of These Digital Converters Are 150 Μa, Automatically Powers Down After A Conversion And Nicely Reduces Current Consumption During Idle..
【Convenient Design】 Easy -To -Use I2c Adc Converter With Programmable Gain Amplifiers. Adc Converter Is Useful For Using Sensors Such As Infrared Rays And Photodiords That Provide Analog Values..
【I2c Interface】 You Can Select An Address With Four Pins-0X48 When Connected To The Gnd, 0X49 When Connected To Vdd, 0X4a When Connected To Sda, And 0X4b When Connected To Scl..
【Product Parameters】Wide Power Supply Voltage: 2.0 To 5.5V; Single Mode: Auto Power Off Function, Onboard Reference And Oscillator..
Features
- ADS1115 16 Bit Analog-to-Digital-Converter It is a 16 -bit ADC converter with an amplifier that can be set. High accuracy, low power consumption, I2C connection.
- Product parameters Wide power supply voltage: 2.0 to 5.5V; single mode: auto power off function, onboard reference and oscillator.
- Low current consumption the supply current of these digital converters are 150 A, automatically powers down after a conversion and nicely reduces current consumption during idle.
- I2C interface You can select an address with four pins-0x48 when connected to the GND, 0x49 when connected to VDD, 0x4A when connected to SDA, and 0x4b when connected to SCL.
- Convenient design Easy -to -use I2C ADC converter with programmable gain amplifiers. ADC Converter is useful for using sensors such as infrared rays and photodiords that provide analog values.
- See more on Amazon...
Brand: Ferwooh | Manufacturer: Ferwooh
See On Amazon #3
WWZMDiB 2Pcs ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter for Arduino Raspberry Pi DIY and Other Experiments
Asin: B0C8LTVQSG | Model: ADS1115 | PartNumber: ADS1115 | Ean: 0705252403028 | UPC: 705252403028
🥇【Programmable Gain Amplifier (Pga)】: The Gain Of The Input Signal Can Be Adjusted In Steps Of 1/2, 1/4, 1/8 Or 1/16. This Makes It Suitable For Applications With Different Input Signals..
🥉【Internal Oscillator】: The Frequency Can Be Set By An External Resistor. This Allows It To Be Used For Applications With Different Frequencies..
🥈【Four Differential Input Channels】: Four Differential Signals Can Be Sampled Simultaneously. In Addition, It Also Supports Single-Ended Inputs, Which Can Sample A Single-Ended Signal..
⚡【Supply Voltage】:2.7V~5.5V..
Features
- ADS1115 16 Bit Analog-to-Digital-Converter :It features high accuracy, programmable gain amplifier (PGA), four differential input channels, and internal oscillator for a variety of measurement and control applications.
- Supply voltage :2.7V~5.5V.
- Programmable Gain Amplifier (PGA) : The gain of the input signal can be adjusted in steps of 1/2, 1/4, 1/8 or 1/16. This makes it suitable for applications with different input signals.
- Four differential input channels : Four differential signals can be sampled simultaneously. In addition, it also supports single-ended inputs, which can sample a single-ended signal.
- Internal oscillator : The frequency can be set by an external resistor. This allows it to be used for applications with different frequencies.
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #4
SHILLEHTEK, Pre-Soldered, ADS1115, 4 Channel, I2C, IIC, Analog-to-Digital, ADC, PGA, 16 Bit, 16 Byte Converter, Programmable Gain Amplifier, High Precision ADC Converter, Arduino, Raspberry Pi
Asin: B0BXWJFCVJ
[High-Performance Ads]: Elevate Your Projects With The Ads1115, Delivering Unparalleled Analog-To-Digital Conversion Precision. Perfect For Applications Requiring Fine-Tuned Sensor Data, Ensuring Your Project Meets The Highest Standards Of Accuracy..
[Efficient Power Usage]: Optimize Energy Consumption With The Ads1115's Low Current Consumption Features. In Continuous Mode, It Draws A Mere 150Μa, And In Single-Shot Mode, It Intelligently Enters Auto Shut-Down, Ensuring Minimal Power Usage When Not Actively Converting Analog Signals..
[Versatile Voltage Support]: Embrace Flexibility With An Expansive Voltage Supply Range From 2.0V To 5.5V. Operates Seamlessly In Comparator Mode, Enhancing Accuracy And Catering To Diverse Project Requirements With Varying Power Inputs..
[Compatibility]: Designed As An Essential Tool For Seamless Integration With Raspberry Pi, Arduino, Esp32, And Other Microcontrollers Lacking Analog Gpio Pins..
Features
- [PRE-SOLDERED]: Solderless! Pins are already attached. Ready to plug in and go
- [COMPATIBILITY]: Designed as an essential tool for seamless integration with Raspberry Pi, Arduino, ESP32, and other Microcontrollers lacking analog GPIO pins.
- [HIGH-PERFORMANCE ADS]: Elevate your projects with the ADS1115, delivering unparalleled analog-to-digital conversion precision. Perfect for applications requiring fine-tuned sensor data, ensuring your project meets the highest standards of accuracy.
- [VERSATILE VOLTAGE SUPPORT]: Embrace flexibility with an expansive voltage supply range from 2.0V to 5.5V. Operates seamlessly in comparator mode, enhancing accuracy and catering to diverse project requirements with varying power inputs.
- [EFFICIENT POWER USAGE]: Optimize energy consumption with the ADS1115's low current consumption features. In Continuous Mode, it draws a mere 150 A, and in Single-Shot Mode, it intelligently enters Auto Shut-Down, ensuring minimal power usage when not actively converting analog signals.
- See more on Amazon...
Brand: ST SHILLEHTEK | Manufacturer: Shenzhen Robotlinking Technology Co., Ltd.
See On Amazon #5
ACEIRMC ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision ADC Converter Development Board for Arduino Raspberry Pi (2pcs)
Asin: B07W6481Y2 | Ean: 0701715428065 | UPC: 701715428065
Wide Voltage Supply Range: 2.0V To 5.5V, Operate In A Comparator Mode Which Is Helpful For Maintaining Accuracy.
Low Current Consumption: Continuous Mode: Only 150Μa ;Single-Shot Mode: Auto Shut-Down..
Programmable Data Rate Is 8Sps-860Sps. Transferred Via An I2c-Compatible Serial Interface..
The Raspberry Pi Cannot Read Analog Input On Its Own, So The Adc Converter Can Help You Use Sensors Like Infrared Or Photodiodes, Which Provide Analog Values..
Features
- High precision ADS1115 16 Bit 4 Channel Analog-to-Digital ADC Converter
- The raspberry pi cannot read analog input on its own, so the ADC Converter can help you use sensors like infrared or photodiodes, which provide analog values.
- Wide voltage supply range: 2.0V to 5.5V, operate in a comparator mode which is helpful for maintaining accuracy
- Programmable data rate is 8sps-860sps. Transferred via an I2C-compatible serial interface.
- Low Current Consumption: Continuous Mode: Only 150 A ;Single-Shot Mode: Auto Shut-Down.
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #6
AITIAO 2PCS Pre-Soldered ADS1115 Analog-to-Digital Converter 16 Bit 16 Byte I2C IIC ADC 4-Channel Programmable Gain Amplifier Module High Precision ADC Converter Development Board for Raspberry Pi
Asin: B0CRKHZDY4 | Ean: 0687117727978 | UPC: 687117727978
Safety And Ssave Time: Solderless! Pins Are Already Attached. Ready To Plug In And Go..
Low Current Consumption: The Supply Current Of These Digital Converters Are 150 Μa, Automatically Powers Down After A Conversion And Nicely Reduces Current Consumption During Idle.
The Data Rate: Programmable Data Rate Is 8Sps-860Sps, Transferred Via An I2c-Compatible Serial Interface; Integrated Programmable Comparators Simplify System Monitoring.
Wide Ssupply Rrange: The Voltage Reference Of These 16 Bit Adc 4 Channel Module Ranging From 2.0V To 5.5V, Compatible With Raspberry Pi And Other Common Microcontrollers..
Features
- Practical and Cconvenient: ADC Converter can help you use sensors such as, infrared or photodiodes, which provide analog values; Solve the problem of unable to read the analog input by itself
- Wide Ssupply Rrange: the voltage reference of these 16 bit ADC 4 channel module ranging from 2.0V to 5.5V, compatible with Raspberry Pi and other common microcontrollers.
- Safety and Ssave Time: Solderless! Pins are already attached. Ready to plug in and go.
- The data rate: programmable data rate is 8sps-860sps, transferred via an I2C-compatible serial interface; Integrated programmable comparators simplify system monitoring
- Low current consumption: the supply current of these digital converters are 150 A, automatically powers down after a conversion and nicely reduces current consumption during idle
- See more on Amazon...
Brand: AITIAO | Manufacturer: AITIAO
See On Amazon #7
CQRobot Ocean: ADS1115 16-Bit Sensor Analog Signal and Digital Signal Acquisition or Conversion ADC Module. 3.3V to 5V, I2C Interface, Compatible with Arduino, Raspberry Pi and Other Motherboards.
Asin: B08KFZ3PVT | Model: CQRADS1115 | PartNumber: CQRADS1115
Ocean: Ads1115 16-Bit Ad Conversion Module Is Specially Designed For Raspberry Pi Compatible With Arduino Series Analog Sensors, Which Greatly Reduces The Difficulty Of Raspberry Pi Main Control Board Compatible With Arduino Series Analog Sensors, Plug And Play, No Soldering, Very Convenient..
One Ad Module Can Read 4 Channels Of Analog Signals. Due To The Onboard I2c Address Selection Switch, It Supports The Cascade Of 2 Ad Modules And Reads 8 Channels Of Analog Signals, Which Is Sufficient To Meet The Needs Of Various Scenarios..
This Module Uses The 16-Bit Adc Chip Ads1115, Which Supports A Wide Voltage Supply From 3.3V To 5V. The Chip Has A Precision Reference Voltage And Programmable Gain Adjustment (Pga), So It Can Be Used For Weak Signals Or Signals With Large Changes. Accurate Acquisition And Conversion, So This Module Is Also Suitable For All Kinds Of Occasions Where The Main Control Board Needs To Accurately Collect Analog Signals..
The Ads1115 16-Bit Ad Conversion Module Can Accurately Collect And Convert Analog Signals. Through This Ad Module, The Raspberry Pi Main Control Board Can Be Very Conveniently Compatible With The Arduino Series Of Analog Sensors, Measure Various Signals, And Perceive This World..
Features
- Raspberry Pi is a common main control board with powerful functions. However, the pins of the Raspberry Pi main control board can only read digital signals. If you need to read the signals of analog sensors or devices, you can only connect an analog-to-digital conversion (ADC) module, which is not convenient to use.
- The ADS1115 16-bit AD conversion module can accurately collect and convert analog signals. Through this AD module, the Raspberry Pi main control board can be very conveniently compatible with the Arduino series of analog sensors, measure various signals, and perceive this world.
- Ocean: ADS1115 16-bit AD conversion module is specially designed for Raspberry Pi compatible with Arduino series analog sensors, which greatly reduces the difficulty of Raspberry Pi main control board compatible with Arduino series analog sensors, plug and play, no soldering, very convenient.
- This module uses the 16-bit ADC chip ADS1115, which supports a wide voltage supply from 3.3V to 5V. The chip has a precision reference voltage and programmable gain adjustment (PGA), so it can be used for weak signals or signals with large changes. Accurate acquisition and conversion, so this module is also suitable for all kinds of occasions where the main control board needs to accurately collect analog signals.
- One AD module can read 4 channels of analog signals. Due to the onboard I2C address selection switch, it supports the cascade of 2 AD modules and reads 8 channels of analog signals, which is sufficient to meet the needs of various scenarios.
- See more on Amazon...
Brand: CQRobot | Manufacturer: CQRobot
Weight: 22.00 Grams
See On Amazon #8
EC Buying 3PCS ADS1115 Amplifier Module 16 Bit Analog to Digital Development Board ADC Converter Module 4 Channel Development Board Gain Amplifier Adjustable Amplifier
Asin: B0BXDLZLZS
The Ads1115 Operate From A Single Power Supply Ranging From 2.0V To 5.5V. Data Are Transferred Via An I2c-Compatible Serial Interface; Four I2c Slave Addresses Can Be Selected.
The Ads1115 Operate Either In Continuous Conversion Mode Or A Single-Shot Mode That Automatically Powers Down After A Conversion And Greatly Reduces Current Consumption During Idle Periods.
The Ads1115 Can Perform Conversions At Ratesup To 860 Samples Per Second(Sps).
The Ads1115 Are Designed With Precision, Power, And Ease Of Implementation In Mind, Feature An Onboard Reference And Oscillator.
Features
- The ADS1115 precision analog-to-digital converters (ADCs) with 16 bits of resolution offered in an ultra-small, leadless QFN-10 package or an MSOP-10 package
- The ADS1115 are designed with precision, power, and ease of implementation in mind, feature an onboard reference and oscillator
- The ADS1115 operate from a single power supply ranging from 2.0V to 5.5V. Data are transferred via an I2C-compatible serial interface; four I2C slave addresses can be selected
- The ADS1115 can perform conversions at ratesup to 860 samples per second(SPS)
- The ADS1115 operate either in continuous conversion mode or a single-shot mode that automatically powers down after a conversion and greatly reduces current consumption during idle periods
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
See On Amazon #9
ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier
Asin: B00QIW4MGW | Model: ADA1085 | PartNumber: ADA1085 | Ean: 0711978445259, 0720189973499, 0717520030577, 7107566225939, 0748347526400 | UPC: 711978445259, 720189973499, 748347526400, 717520030577
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 1.00 x 3.00 x 2.00 inches | Weight: 0.04 Pounds
See On Amazon #10
NOYITO 4-Channel 16-Bit ADC with PGA for RPI Raspberry PI 16 Bits I2C ADS1115 Module ADC 4 Channel for Raspberry Pi 3 2 Model B B+
Asin: B07PNMXR8B | Model: NO416ADC-PGA | PartNumber: NO416ADC-PGA | Ean: 0680613661883 | UPC: 680613661883
You Can Use The Analog Signal's Joystick Or Other Analog Sensors Such As Ntc, Temperature, And Dust Sensors To Access The Raspberry Pi Through The Rpi-Ads1115-Adc Module To Capture Analog Signals Through The Raspberry Pi Reading Device..
Noyito 4-Channel 16Bit Adc With Pga For Rpi Raspberry Pi 16 Bits I2c Ads1115 Module User Manual.
Https://1Drv.Ms/U/S!Alzqucoyzqhkgs2mx4fcv6mkklpk?E=Ej6abt.
Here Comes The Perfect Solution For Adding A Vga Screen To Your Raspberry Pi. What Is Better, It Is So Much Cheaper Than An Hdmi To Vga Adapter.This Vga Connection Is Driven Natively In Hardware Over The Gpio Pins Using A Parallel Interface And It Takes Around The Same Cpu Load As The Hdmi Connection On Board. It Is Capable Of Displaying 1080P Vga Video With Zero Cpu Load. You May Drive This Interface With The Hdmi Connection At The Same Time To Even Set Up Dual Screens.
The Data Is Transmitted Through The I2c-Compatible Serial Interface. It Has 4 I2c Addresses To Choose From, And The Working Power Supply Only Needs 3.3V.Its Main Function Is To Detect Analog Signals And Convert Them Into Digital Signals..
Features
- The RPi-ADS1115-ADC module is a precision analog-to-digital converter (ADC). The ADS1115 is a chip that provides 16-bit sampling accuracy in an ultra-small MSOP-10 package.
- The data is transmitted through the I2C-compatible serial interface. It has 4 I2C addresses to choose from, and the working power supply only needs 3.3V.Its main function is to detect analog signals and convert them into digital signals.
- You can use the analog signal's joystick or other analog sensors such as NTC, temperature, and dust sensors to access the Raspberry Pi through the RPi-ADS1115-ADC module to capture analog signals through the Raspberry Pi reading device.
- Here comes the perfect solution for adding a VGA screen to your Raspberry Pi. What is better, it is so much cheaper than an HDMI to VGA adapter.This VGA connection is driven natively in hardware over the GPIO pins using a parallel interface and it takes around the same CPU load as the HDMI connection on board. It is capable of displaying 1080P VGA video with zero CPU load. You may drive this interface with the HDMI connection at the same time to even set up dual screens
- NOYITO 4-Channel 16Bit ADC With PGA For RPI Raspberry PI 16 Bits I2C ADS1115 Module User Manual
- https://1drv.ms/u/s!AlzQUCOyZQhKgS2MX4Fcv6MKKlPk?e=eJ6Abt
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.71 x 2.56 x 1.18 Inches | Weight: 0.03 Pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon
Looking For Something Else?
Search