Motor Driver Controller JYQD_V6.3E1 DC12V-36V 20A Brushless Motor Controller 3 Phase Spindle BLDC Motor Driver Controller Board Reversible Switch Motor Driver Control Regulator Module
Asin: B08HS13S1J | Model: Oumefarok5nxdgv4e | PartNumber: Oumefarok5nxdgv4e | Ean: 8845136388705
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Great Performance】: This Jyqd_V6.3E1 Motor Driver Is A High Performance, Cost-Effective 3 Phase Bldc Motor Controller, And Voltage Range Is From 12Vdc To 36Vdc, Which Is 100% Brand New And Has High Quality Assurance..
【Widely Used Controller】: The Motor Driver Controller Can Be Used In Small Equipment, Electric Power Tools, Exhaust Fan, Jade Grinding Machine, Vibrating Motor, Etc, And This Brushless Motor Driver Controller Is An Ideal Choice For You..
【Multiple Protection】: This Brushless Motor Driver Controller Has Designed With Over-Voltage Protection, Over-Current Protection, Locked-Rotor Protection, Which Can Greatly Protect The Motor Driver Controller..
【External Voltage Control】: This Jyqd_V6.3E1 Brushless Motor Controller Supports External Potentiometer Control And External Voltage Control, Thus You Can Not Worry About This Motor Controller Working Condition..
Features
- Brushless Motor Driver : The Brushless Motor Driver Controller can drive the motor without HALL, with a great working performance, which can be a great helper for you.
- External Voltage Control : This JYQD_V6.3E1 Brushless Motor Controller supports external potentiometer control and external voltage control, thus you can not worry about this Motor Controller working condition.
- Great Performance : This JYQD_V6.3E1 Motor Driver is a high performance, cost-effective 3 phase BLDC motor controller, and voltage range is from 12VDC to 36VDC, which is 100% brand new and has high quality assurance.
- Multiple Protection : This Brushless Motor Driver Controller has designed with over-voltage protection, over-current protection, locked-rotor protection, which can greatly protect the Motor Driver Controller.
- Widely Used Controller : The Motor Driver Controller can be used in small equipment, electric power tools, exhaust fan, jade grinding machine, vibrating motor, etc, and this Brushless Motor Driver Controller is an ideal choice for you.
- See more on Amazon...
Brand: Oumefar | Manufacturer: Oumefar
Dimensions: 0.79 x 2.76 x 2.36 inches
See On Amazon Similar To Motor Driver Controller JYQD_V6.3E1 DC12V36V
#1
RioRand 6V 12V 24V 28V 3A 80W DC Motor Speed Controller PWM Speed Adjustable Reversible Switch 1203BB DC Motor Driver Reversing
Asin: B071H2YQG5 | Model: RR-PWM-3A | PartNumber: RR-PWM-3A | Ean: 0637012217609 | UPC: 637012217609
Potentiometer With Switch Function.
Package: 1 X Riorand Dc Motor Speed Controller.
Item Size: 3.2*5*1.5 Cm/1.3*2*0.4 Inches; Net Weight: 1.13 Ounces.
The Switch Cable Length 15Cm/5.9In.
Features
- The input power range is dc6-28v; the maximum continuous output current: 3a; the maximum output power: 80W
- The switch cable length 15cm/5.9in
- Potentiometer with switch function
- Item size: 3.2*5*1.5 cm/1.3*2*0.4 inches; net weight: 1.13 ounces
- Package: 1 x RioRand DC motor speed controller
- See more on Amazon...
Brand: RioRand | Manufacturer: RioRand
Dimensions: 0.40 x 2.00 x 1.30 inches
See On Amazon #2
BOJACK Low Voltage DC Motor Speed Controller PWM 1.8v 3v 5v 6v 12v 2A 30W Adjustable Driver Switch 1803BK 1803B (Pack of 2 Pcs)
Asin: B09P6D5TMV | Model: BJ-1803BK | PartNumber: BJ-1803BK | Ean: 0762917045412 | UPC: 762917045412
Maximum Continuous Output Current: 2A.
Equipped With A 2A Self-Recovery Fuse, Which Will Automatically Disconnect If The Current Is Too Large, And Will Automatically Recover After The Fuse Cools Down.
Input Voltage: Dc 2.2V-15V; Output Voltage: 1.8V-15V.
Maximum Output Power: 30W.
Features
- Adjustable duty cycle: 0%-100%
- Maximum output power: 30W
- Maximum continuous output current: 2A
- Input voltage: DC 2.2V-15V; output voltage: 1.8V-15V
- Equipped with a 2A self-recovery fuse, which will automatically disconnect if the current is too large, and will automatically recover after the fuse cools down
- See more on Amazon...
Brand: BOJACK | Manufacturer: BOJACK
See On Amazon #3
DROK DC Motor Driver, L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation
Asin: B06XGD5SCB | Model: 200206_OZ | PartNumber: 200206_OZ | Ean: 0701822755689 | UPC: 701822755689
Forward And Revsersely Rotate: The In1, In2/In3, In4 Port Can Control Forward Or Reverse Motor Rotation..
Under Voltage Protection: The Motor Driver Module Is With Under Voltage Protection To Prevent Instantaneous Large Current From Damaging The Module..
Pwm Speed Control: Enable Signal Terminal (Ena) Input Pwm Can Regulate Speed, Pwm Frequency Range 0-10Khz..
Strong Drive: The Motor Controller Board Adopts Dual H Bridge, Can Drive Two Dc Motors At The Same Time..
Features
- DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W.
- STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time.
- FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation.
- PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ.
- UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module.
- See more on Amazon...
Brand: DROK | Manufacturer: DROK
See On Amazon #4
Riorand DC 3V 6V 12V 24V 35V 5A Motor Speed Controller PWM Speed Control Ultra Small LED Dimmer 2PCS
Asin: B07WGT8K82 | Model: 1-OPKL-8L | PartNumber: 1-OPKL-8L | Ean: 0637012253645 | UPC: 637012253645
Provide A Continuous Current Of 5A To Your Dc Brush Motor Or Other Dc Load.
Working Voltage : Dc3v-35V，Control Power : 90W(Max)，Quiescent Current : 0.015A (Standby State)，Pwm Duty Cycle : 1% To 100%，Pwm Frequency : 10Khz.
This Mini Controller Will Be Disconnected Automatically If The Current Is Too Large And The Fuse Will Recover Automatically After Cooling.
Motor Speed Controller With A Self-Recovery Fuse 5A And A Power-On Led Light.
Features
- Speed Control Switch Low Voltage DC 3V 5V 6V 12V 5A;Control Power: 90W;Duty Cycle adjustable: 1%-100%
- Motor Speed Controller with a self-recovery fuse 5A and a Power-On LED light
- Provide a continuous current of 5A to your DC brush motor or other DC load
- This mini controller will be disconnected automatically if the current is too large and the fuse will recover automatically after cooling
- Working voltage : DC3V-35V Control power : 90W(max) Quiescent current : 0.015A (standby state) PWM Duty Cycle : 1% to 100% PWM frequency : 10khz
- See more on Amazon...
Brand: RioRand | Manufacturer: RioRand
Dimensions: 1.18 x 4.72 x 3.15 inches
See On Amazon #5
RioRand 350W 6-60V PWM DC Brushless Electric Motor Speed Controller with Hall
Asin: B087M2378D | Model: KJL-01 | PartNumber: KJL-01
The Main Board Power Supply Circuit Without Fuse, Can Be Added(By Yourself), The Power Supply Positive And Negative Terminals Will Cause Permanent Damage To Some Of The Chips On The Board (Not Even For A Few Seconds When The High Current).
Do Not Connect The Obvious And Drive Module Voltage, Current, Power Phase Does Not Match Or Far From The Motor To Avoid Inexplicable "Nonsense" Damage..
Motor Output For Sampling Overcurrent Protection, Due To The Module Power Supply Current Are Very Large. Do Not Artificially Cause A Short Circuit In The Normal Operation Of The Module, A Short Circuit Will Damage The Tube. Wiring Test Machine For Small-Current Low-Voltage Test, Successful Then Through The High-Current High-Voltage . Bare Board Module, Pay Attention To Wire Insulation When Wiring, Forbid Strong Voltage To Touch The Board..
New Upgrade Bldc Wide Voltage 6-60V High Power 350W, Dc Three-Phase Brushless With Hall Controller, Support Plc 0-5V Touch Volume Control, Support Pwm Control Amplitude 2.5-5V..
Features
- Three phase DC brushless with Hall motor controller, need motor with Hall to work properly. Brushless motor driver board, high power PLC. This driver is only for DC brushless with Hall motor with electric angle 120 degrees.
- New upgrade BLDC wide voltage 6-60V high power 350W, DC three-phase brushless with Hall controller, support PLC 0-5V touch volume control, support PWM control amplitude 2.5-5V.
- The main board power supply circuit without fuse, can be added(by yourself), the power supply positive and negative terminals will cause permanent damage to some of the chips on the board (not even for a few seconds when the high current)
- Motor output for sampling overcurrent protection, due to the module power supply current are very large. Do not artificially cause a short circuit in the normal operation of the module, a short circuit will damage the tube. Wiring test machine for small-current low-voltage test, successful then through the high-current high-voltage . Bare board module, pay attention to wire insulation when wiring, forbid strong voltage to touch the board.
- Do not connect the obvious and drive module voltage, current, power phase does not match or far from the motor to avoid inexplicable nonsense damage.
- See more on Amazon...
Brand: RioRand | Manufacturer: RioRand
Dimensions: 1.18 x 2.36 x 1.97 inches
See On Amazon #6
KeeYees 7-70V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse
Asin: B083J3WMND | Ean: 0744678331119 | UPC: 744678331119
【30A Fuse】: This Set Contains A 30A Fuse To Prevent Shorting Of The Motor Interface. Double Protection Of Your Motor And Motor Speed Controller..
【Note 2】: If There Is A Forward-Reverse Circuit Regulator On The Children's Car, Please Be Sure To Connect The Speed Controller Between The Power Supply And The Forward -Reverse Circuit Regulator Of The Children's Car. Otherwise, The Speed Controller May Be Damaged..
【Note 1】: The Power Of The Input Power Supply Must Be Greater Than 1.5 Times The Rated Power Of The Motor To Make The Motor Work (Note: The Input Voltage And The Rated Voltage Of The Motor Must Be Consistent)..
【Speed Control Knob】: The Knob Has A Switch Function, Which Can Control The Motor Speed From 0% To 100%. Adjustable Potentiometer Flexible Cable Can Be Separated, The Cable Length Is 15Cm..
Features
- Wide Voltage : Wide voltage input 7-70V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. )
- Speed Control Knob : The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM.
- 30A Fuse : This set contains a 30A fuse to prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller.
- Note 1 : The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent).
- Note 2 : If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #7
Hosyond PWM Motor Speed Controller DC 7-70V 30A 12V 24V 36V 48V with 30 Amp Fuse
Asin: B0BVM6XPLQ | Ean: 0782917535690 | UPC: 782917535690
The Flexible Cable For Adjusting The Potentiometer Is Detachable, The Length Of The Cable Is 15Cm (About 5.9 Inches), And The Installation Is Flexible And Convenient..
Adopt High-Quality High-Voltage Mos Tubes, Three 100V High-Frequency And Low-Resistance Capacitors, And Automotive Fuses. The Parameters Are Accurate, Not Easy To Heat And Easy To Replace. The Standard Aluminum Shell Protects The Internal Circuit And Components For Long-Term Durability..
Optimized Circuit Design, Wide Duty Cycle Adjustment Range, Smooth Motor Adjustment, No Bath Sound, No Vibration, With Power Indicator, Stable Circuit Design Suitable For Long-Term Work..
A 30A Fuse Is Included To Protect The Motor Interface From Short Circuits. Double Protection For Your Motor And Motor Speed Controller..
Features
- The design of wide voltage 7-70V and high current 30A has a wide range of applications, and the switch on the board has the functions of running, stopping and braking.
- A 30A fuse is included to protect the motor interface from short circuits. Double protection for your motor and motor speed controller.
- The flexible cable for adjusting the potentiometer is detachable, the length of the cable is 15CM (about 5.9 inches), and the installation is flexible and convenient.
- Optimized circuit design, wide duty cycle adjustment range, smooth motor adjustment, no bath sound, no vibration, with power indicator, stable circuit design suitable for long-term work.
- Adopt high-quality high-voltage MOS tubes, three 100V high-frequency and low-resistance capacitors, and automotive fuses. The parameters are accurate, not easy to heat and easy to replace. The standard aluminum shell protects the internal circuit and components for long-term durability.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Weight: 0.34 pounds
See On Amazon #8
BOJACK 6V 12V 24V 28V 3A 80W DC Motor Speed Controller (PWM) Speed Adjustable Reversible Switch 1203BB DC Motor Driver Reversing
Asin: B09HGR74TL | Model: BJ-1203BB | PartNumber: BJ-1203BB | Ean: 0762917044842 | UPC: 762917044842
[Item Size] 1.3X2x0.4 Inch/3.2X5x1.5 Cm.
[Packing List] Bojack Dc Motor Speed Controller X 1Pcs.
[Cable Length]5.9 Inch/15 Cm.
[Power Parameters] Voltage: 6V-28Vdc; Maximum Continuous Output Current: 3A; Maximum Output Power: 80W.
Features
- BOJACK Motor Speed Controller (PWM) with switch function.
- [Power parameters] Voltage: 6V-28VDC; Maximum continuous output current: 3A; Maximum output power: 80W
- [Item size] 1.3x2x0.4 inch/3.2x5x1.5 cm
- [Cable length]5.9 inch/15 cm
- [Packing list] BOJACK DC motor speed controller x 1Pcs
- See more on Amazon...
Brand: BOJACK | Manufacturer: BOJACK
See On Amazon #9
BOJACK Motor Speed Controller 9V-60V 12V 24V 36V 48V 60V Brush Motor Driver Controls Module Motor Pulse Width Modulator Regulator 20A 1200W PWM Monitor Dimmer Governor with Switch Knob
Asin: B09P55FZW7 | Model: BJ-MSC | PartNumber: BJ-MSC | Ean: 0762917045399 | UPC: 762917045399
Motor Control Board Can Regulate Motor Speed By Potentiometer; What's More, It Support Clockwise/Anticlock-Wise Rotation Adjustment..
The Advantage Of Using A Pulse Width Modulation (Pwm) Method For Dimming / Speed Regulation Is That The Energy Of The Power Supply Can Be Fully Utilized And The Circuit Is Highly Efficient..
Thick Red Wire For The Positive Of The Power Supply, And Thick Balck For The Negative; Thick Blue Wire For The Motor Positive, And The Thick Green For The Motor Negative..
The Dc Motor Driver Can Be Used To Brush Motor Speed Regulation, Light Dimming Regulation In The Dc Circuit. Note: The Motor Cannot Be Used In Electric Vehicles..
Features
- Motor speed controller input voltage range is 9-60V, output current range is 0-20A, continuous power is 1200W.
- The dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit. Note: The motor cannot be used in electric vehicles.
- Motor control board can regulate motor speed by potentiometer; what's more, it support clockwise/anticlock-wise rotation adjustment.
- Thick red wire for the positive of the power supply, and thick balck for the negative; thick blue wire for the motor positive, and the thick green for the motor negative.
- The advantage of using a pulse width modulation (PWM) method for dimming / speed regulation is that the energy of the power supply can be fully utilized and the circuit is highly efficient.
- See more on Amazon...
Brand: BOJACK | Manufacturer: BOJACK
See On Amazon #10
BOJACK DC Mini Motor PWM Speed Controller Small LED Dimmer 5A 90W 3V 6V 12V 24V 35V Speed Control Switch (Pack of 2Pcs)
Asin: B09P6CMRC9 | Model: BJ-MSC-LED | PartNumber: BJ-MSC-LED | Ean: 0762917045405 | UPC: 762917045405
🔸The Current Is Up To 5A, The Operating Voltage Is 3-35V (3-9V Input Needs Short Circuit).
🔸High Voltage And High Current Resettable Fuse, Overcurrent Automatic Disconnection, Power Off For Cooling For A Few Seconds Fuses Automatic Recovery.
🔸Default Disconnection Of Short Circuit Point,Manually Connect The Short Circuit Point According Your Needs.
🔸It Can Be Used For Speed Regulation And Led Dimming.
Features
- PWM duty cycle: 1% -100%
- It can be used for speed regulation and LED dimming
- The current is up to 5A, the Operating Voltage is 3-35V (3-9V input needs short circuit)
- Default disconnection of short circuit point,Manually connect the short circuit point according your needs
- High voltage and high current resettable fuse, overcurrent automatic disconnection, power off for cooling for a few seconds fuses automatic recovery
- See more on Amazon...
Brand: BOJACK | Manufacturer: BOJACK
Dimensions: 0.78 x 1.77 x 0.95 inches
See On Amazon
Looking For Something Else?
Search