Frontpage > Product > Uxcell M3 X 0.5 Spiral Point Threading Tap, H2 Tolerance High Speed Steel Ticn Coated, Round Shank W...

uxcell M3 x 0.5 Spiral Point Threading Tap, H2 Tolerance High Speed Steel TICN Coated, Round Shank with Square End, Metric Screw Taps Tapping Bit for Machinist Thread Repair, 2pcs

Asin: B08J6HNVSG   |   Model: a20010400ux0050   |   PartNumber: a20010400ux0050


As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.

Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Ticn Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..

Features

  • Spiral Point Tap: M3 x 0.5 thread with H2 tolerance, JIS standard, right hand thread cutting. Straight flutes taps provide provide downward chip removal, with clear threads and sharp cutting edges.
  • Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. TICN coating for improving wear resistance, hardness, heat resistance, lubricity.
  • Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $8.59 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




Similar To uxcell M3 x 0.5 Spiral

  #1

uxcell M3 x 0.5 Spiral Point Thread Tap and 2.5mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool

Asin: B09TVGPS96   |   Model: a22010500ux0490   |   PartNumber: a22010500ux0490

Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance.
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Point Tap: Spiral Point Design, Downward Chip Removal, Right Hand Thread Cutting. Suitable For Processing Through-Hole Threads, And Tapping Aluminum, Stainless Steel, Bronze, Hard Plastics. Titanium Coating Provides Excellent Corrosion Resistance And Wear Resistance..

Features

  • Tap and Drill Bit: Tap thread size: M3 x 0.5, drill bit diameter: 2.5mm / 0.1". High-speed steel tool has high hardness and toughness for wear resistance. Good for general purpose applications.
  • Spiral Point Tap: Spiral point design, downward chip removal, right hand thread cutting. Suitable for processing through-hole threads, and tapping aluminum, stainless steel, bronze, hard plastics. Titanium coating provides excellent corrosion resistance and wear resistance.
  • Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $7.09 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #2

uxcell Metric Machine Tap M3 x 0.5mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool 2pcs

Asin: B07KT1VM7G   |   Model: a18102400ux0267   |   PartNumber: a18102400ux0267

Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Standard Metric Thread Design, Clear And Tidy, Provide Rapid Chip Removal For Efficient Threading. Straight Flute Design, Right Hand Tapping Direction. The Mini Metric Taps Are Mainly Used For Clocks, Watches, Low Hardness Wood And Soft Metal Hole Processing..
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..

Features

  • Thread Size: M3 x 0.5mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
  • The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
  • Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Straight flute design, right hand tapping direction. The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing.
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Dimensions: 1.18 x 4.72 x 1.97 inches

Amazon Price: $7.49 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #3

uxcell M3 x 0.5 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs

Asin: B097666SK2   |   Model: a20010400ux0067   |   PartNumber: a20010400ux0067

Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..

Features

  • Tap Size: M3 x 0.5 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Weight: 0.00 Pounds

Amazon Price: $9.99 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #4

uxcell 5 Pairs Metric Hand Threading Tap Set M3 Thread 0.5mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

Asin: B07WHWBTLJ   |   Model: a19070800ux0124   |   PartNumber: a19070800ux0124

Easy To Use: Hand Tapping, Mainly Used With Tap Wrenches. Standard Thread Milling Taps Are Used To Thread Through Holes Or Shallow And Blind Holes..
Tips: Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps. Without Any Additional Coatings, Good For General Purpose Applications..
Features: Straight Flute Design, Downward Chip Removal. High Speed Steel Tool Is High Hardness, High Strength, Good Toughness, And Wear Resistance..
Applications: The Hand Threading Tap Kit Is Used To Re-Thread Damaged Or Jammed Threads. Suitable For Threading Mild Steels, Aluminum, Iron, Copper, Hard Plastic..

Features

  • Metric Taps: M3 x 0.5 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes.
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic.
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes.
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance.
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $12.19 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #5

uxcell Spiral Point Plug Threading Tap M3 x 0.5 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Metric Screw Taps Tapping Bit for Thread Repair, 2pcs

Asin: B07Z9RCJBB   |   Model: a19091100ux0210   |   PartNumber: a19091100ux0210

Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Titanium Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..

Features

  • Spiral Point Tap: Thread size: M3 x 0.5; thread tolerance: H2; thread length: 15mm / 0.6"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.
  • Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
  • Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $9.09 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #6

uxcell Spiral Point Plug Threading Tap M3.5 x 0.6 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Metric Screw Taps Tapping Bit for Thread Repair, 2pcs

Asin: B07Z9RN3TL   |   Model: a19091100ux0212   |   PartNumber: a19091100ux0212

Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Titanium Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..

Features

  • Spiral Point Tap: Thread size: M3.5 x 0.6; thread tolerance: H2; thread length: 13mm / 0.5"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.
  • Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
  • Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
  • How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
  • Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $8.39 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #7

uxcell M3 x 0.5 Straight Flute Thread Tap and 3mm Twist Drill Bit Set, Metric Titanium Plated 6542 High Speed Steel Drilling Bit Machine Threading Tap

Asin: B09TVGKTH6   |   Model: a22010500ux0469   |   PartNumber: a22010500ux0469

Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Titanium Coating Provides Excellent Corrosion Resistance And Improves Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Straight Flute Tap: Straight Flute Design, Downward Chip Removal. Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Through Holes. For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics.

Features

  • Tap and Drill Bit: Tap thread size: M3 x 0.5, drill bit diameter: 3mm / 0.12". High-speed steel tool has high hardness and toughness for wear resistance.
  • Straight Flute Tap: Straight flute design, downward chip removal. Right hand thread cutting, fast tapping with accuracy. Suitable for processing through holes. For drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics
  • Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Titanium coating provides excellent corrosion resistance and improves wear resistance.
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Weight: 0.00 Pounds

Amazon Price: $7.09 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #8

uxcell Metric Machine Tap M4 x 0.7mm H2 Titanium Coated (Ti-Coated) High Speed Steel 3 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

Asin: B07KT39KJ5   |   Model: a18102400ux0227   |   PartNumber: a18102400ux0227

Suitable For Processing Through Holes Or Shallow Holes. The Mini Metric Taps Are Mainly Used For Clocks, Watches, Low Hardness Wood And Soft Metal Hole Processing. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Ti-Coated Taps Provide Capability, Durability And Long Service Life. Fits A Wide Range Of Applications..

Features

  • Thread Size: M4 x 0.7mm. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications.
  • The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications.
  • Suitable for processing through holes or shallow holes. The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing. Add appropriate tapping oil for higher quality internal threads and more durable taps.
  • Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Dimensions: 0.39 x 2.36 x 0.39 inches   |   Weight: 0.00 pounds

Amazon Price: $10.39 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #9

uxcell Metric Spiral Machine Screw Tap M3 Thread 0.5 Pitch H2 Titanium High Speed Steel

Asin: B07VDRQGTH   |   Model: a19051000ux0624   |   PartNumber: a19051000ux0624

Material: Hss (High Speed Steel); Surface Treatment: Ti Coated.
Suitable For Drilling, Tapping, Cutting On Soft Metal, Aluminum Plate, Iron..
Used With Some Cutting Fluid Or Keep It Wet When Tapping, The Tap Will Last Longer..
Thread Length: 15Mm / 0.6 Inch; Total Length: 49Mm / 1.9 Inch.

Features

  • Thread Size: M3; Pitch: 0.5; Shank Side Width: 2.2mm / 0.1 inch
  • Thread Length: 15mm / 0.6 inch; Total Length: 49mm / 1.9 inch
  • Material: HSS (High Speed Steel); Surface Treatment: Ti Coated
  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer.
  • Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $9.89 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #10

uxcell Metric Thread Tap M3 x 0.5 H2 100mm Extra Long Straight Flute Screw Thread Milling Machine Taps Threading Tapping Repair Tool

Asin: B0CWPD79TS

Wide Applications: Thread Taps Create New Threads Or Re-Thread Damaged Or Jammed Threads. Widely Used For Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel. Add Proper Tapping Oil For Higher Quality Threads And More Durable Taps..
Tips: Machine Taps Are Used With Tapping, Drilling, Automatic Or Milling Machines. Drill The Holes With A Twist Drill Bit First, Then Tap With A Thread Tap. The Tapping Angle Should Be 90 Degrees Vertical And Stable. Not Recommended For Hand And Electric Drill Tapping..
6542 High Speed Steel Tap: Offer High Hardness, Good Toughness, Wear Resistance, And Excellent Cutting Performance. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, Great For A Wide Range Of Applications..
Straight Flute Tap: Straight Flute Design, Clear Threads Without Burrs, Right Hand Tapping Direction. Provides Rapid Downward Chip Removal To Achieve Efficient Thread Cutting, Suitable For Processing Through Holes Or Shallow Holes..

Features

  • Metric Thread Tap: Thread size: M3 x 0.5 (right hand); accuracy: H2; total length: 100mm / 4" (extra long); square shank width: 2.5mm / 0.1"; thread length: 20mm / 0.79"; number of chip flutes: 3 flutes. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
  • Straight Flute Tap: Straight flute design, clear threads without burrs, right hand tapping direction. Provides rapid downward chip removal to achieve efficient thread cutting, suitable for processing through holes or shallow holes.
  • Wide Applications: Thread taps create new threads or re-thread damaged or jammed threads. Widely used for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel. Add proper tapping oil for higher quality threads and more durable taps.
  • 6542 High Speed Steel Tap: Offer high hardness, good toughness, wear resistance, and excellent cutting performance. Uncoated taps feature just the base substrate without any additional coatings, great for a wide range of applications.
  • Tips: Machine taps are used with tapping, drilling, automatic or milling machines. Drill the holes with a twist drill bit first, then tap with a thread tap. The tapping angle should be 90 degrees vertical and stable. NOT recommended for hand and electric drill tapping.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $9.29 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #11

uxcell M3x25mm 0.5mm Pitch Bolts Socket Cap Head Hex Key Screws 20pcs

Asin: B011BNSTNY   |   Model: US-SA-AJD-58911   |   PartNumber: US-SA-AJD-58911   |   Ean: 0711331530301   |   UPC: 711331530301

Thread Pitch : 0.5Mm;Hex Width : 2.5Mm/ 0.1".
Weight : 30G;Package Content : 20 X Hex Socket Cap Screws.
Head Size : 5.3 X 3Mm/ 0.21" X 0.12" (D*H);Overall Size : 28 X 5.3Mm/ 1.1" X 0.21"(L*D).
Screw Type : M3x 25Mm;Thread Diameter : 3Mm/ 0.12";Thread Length : 25Mm/ 1".

Features

  • Product Name : Hex Socket Cap Screw;Material : 304 Stainless Steel;Color : Silver Tone
  • Screw Type : M3x 25mm;Thread Diameter : 3mm/ 0.12;Thread Length : 25mm/ 1
  • Thread Pitch : 0.5mm;Hex Width : 2.5mm/ 0.1
  • Head Size : 5.3 x 3mm/ 0.21 x 0.12 (D*H);Overall Size : 28 x 5.3mm/ 1.1 x 0.21(L*D)
  • Weight : 30g;Package Content : 20 x Hex Socket Cap Screws
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Weight: 0.00 pounds

Amazon Price: $8.99 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #12

uxcell M3 x 0.5 Spiral Point Thread Tap and 2.5mm Twist Drill Bit Set, Metric Titanium Plated 6542 High Speed Steel Machine Screw Thread Tap Threading Tool

Asin: B09TYS6RZW   |   Model: a22010500ux0511   |   PartNumber: a22010500ux0511

Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches.Titanium Coating Provides Excellent Corrosion Resistance And Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Point Tap: Spiral Point Flute Design, Downward Chip Removal, Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Through-Hole Threads. For Fast Tapping In Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics..

Features

  • Tap and Drill Bit: Tap thread size: M3 x 0.5, drill bit diameter: 2.5mm / 0.1". High-speed steel tool has high hardness and toughness for wear resistance. Good for general purpose applications.
  • Spiral Point Tap: Spiral point flute design, downward chip removal, right hand thread cutting, fast tapping with accuracy. Suitable for processing through-hole threads. For fast tapping in aluminum, die steel, stainless steel, bronze, hard plastics.
  • Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.Titanium coating provides excellent corrosion resistance and wear resistance.
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Weight: 0.00 pounds

Amazon Price: $7.79 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #13

uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M3 x 0.5 Metric Uncoated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool 2pcs

Asin: B0B1V5BNQB   |   Model: a22040200ux0965   |   PartNumber: a22040200ux0965

Features: Self-Centering Point, Do Not Need Assistant Center Drilling Or Center Punching. Quick Change 1/4-Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. A Tapered End On Hex Shank Can Prevent Excessive Tapping..
Tips: Use On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Coating: Features Just The Base Substrate Without Any Coatings, Good For Most General Purpose Thread Tapping. High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance And Heat Resistance..
Wide Applications: Suitable For Processing Blind Holes. Used For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..

Features

  • Combination Drill and Tap Bit: Thread Size: M3 x 0.5; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
  • Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
  • Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
  • Coating: Features just the base substrate without any coatings, good for most general purpose thread tapping. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
  • Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $8.79 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #14

uxcell Round Threading Dies, Metric M3 x 0.5 Thread (Right Hand), High Speed Steel (HSS) Screw Cutting Die Repair Tool

Asin: B0CTMSWJN5

Features: Conical Locking Hole, Strong Locking Force, No Loosening. Suitable For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The End Of The Bar Stock Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: Threading Die Is Used With Die Stock (Also Called Die Handle Or Die Wrench). The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Wrench, And The Screw Should Be Inserted Into The Groove Of The Die And Tightened. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole..
Wide Applications: Round Dies Can Process, Correct Or Clean The External Threads, And Is Used For Ordinary Thread Processing Of Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..

Features

  • Round Threading Die: Thread size: M3 x 0.5 (right hand); outside diameter: 20mm / 0.79"; thickness: 5mm / 0.2"; accuracy class: 6g. Made of M2 (6542) high-speed steel, it has high hardness, good toughness, wear resistance, and excellent cutting performance.
  • Wide Applications: Round dies can process, correct or clean the external threads, and is used for ordinary thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic. Great for maintenance and repair work on pipes, boards and machinery.
  • Features: Conical locking hole, strong locking force, no loosening. Suitable for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
  • Easy to Use: Threading die is used with die stock (also called die handle or die wrench). The positioning groove of the die should be aligned with the fastening screw in the middle of the wrench, and the screw should be inserted into the groove of the die and tightened. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole.
  • Tips: Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The end of the bar stock should be chamfered 1*45 degree, and the chamfer is too large to cut in. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $8.49 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #15

uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M3 x 0.5 Metric Uncoated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool

Asin: B0B1V4T3MZ   |   Model: a22040200ux0964   |   PartNumber: a22040200ux0964

Features: Self-Centering Point, Do Not Need Assistant Center Drilling Or Center Punching. Quick Change 1/4-Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. A Tapered End On Hex Shank Can Prevent Excessive Tapping..
Tips: Use On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Coating: Features Just The Base Substrate Without Any Coatings, Good For Most General Purpose Thread Tapping. High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance And Heat Resistance..
Wide Applications: Suitable For Processing Blind Holes. Used For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..

Features

  • Combination Drill and Tap Bit: Thread Size: M3 x 0.5; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
  • Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
  • Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
  • Coating: Features just the base substrate without any coatings, good for most general purpose thread tapping. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
  • Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $7.29 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #16

uxcell Tap & Bit Sets, M5 x 0.5 H2 Straight Flute Machine Thread Milling Tap, 4.5mm M35 Cobalt High Speed Steel (HSS-CO) Twist Drill Bit

Asin: B0BNXN56PG   |   Model: a22080200ux0653   |   PartNumber: a22080200ux0653

Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. M35 5% Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Thread Tap: Straight Flute Design, Downward Chip Removal, Fast Tapping With Accuracy. Suitable For Processing Through Holes Or Shallow Holes. For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics. Provides High Hardness And Toughness For Wear Resistance..

Features

  • Tap & Bit Sets: Tap size: thread size: M5 x 0.5; accuracy: H2; total length: 62mm / 2.44". Drill bit size: cutting edge diameter: 4.5mm / 0.177"; total length: 80mm / 3.15".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance.
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance.
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $9.89 ($4.94 / Count) | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #17

uxcell Tap & Bit Sets, M3 x 0.5 H2 Straight Flute Machine Thread Milling Tap, 2.5mm M35 Cobalt High Speed Steel (HSS-CO) Twist Drill Bit

Asin: B0BNXPS96L   |   Model: a22080200ux0621   |   PartNumber: a22080200ux0621

Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. M35 5% Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Thread Tap: Straight Flute Design, Downward Chip Removal, Fast Tapping With Accuracy. Suitable For Processing Through Holes Or Shallow Holes. For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics. Provides High Hardness And Toughness For Wear Resistance..

Features

  • Tap & Bit Sets: Tap size: thread size: M3 x 0.5; accuracy: H2; total length: 50mm / 1.97". Drill bit size: cutting edge diameter: 2.5mm / 0.098"; total length: 57mm / 2.24".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance.
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance.
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $8.19 ($4.10 / Count) | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #18

uxcell Wire Thread Inserts 1/2-13 UNC 1.5D 304 Stainless Steel Helical Type Coiled Wire Screw Repair Threaded Sleeve Steel Sheath 10pcs

Asin: B09TW12G3F   |   Model: a22011400ux0640   |   PartNumber: a22011400ux0640

Wide Applications: Widely Used In Mechanical Equipment, Construction Machinery And Other Equipment That Need Thread Repair. The Helical Thread Insert Is Not Easy To Slip, With Deep And Clear Thread, No Deformation..
Easy To Lock: The Locking Type Wire Thread Insert Can Easily Lock The Screw Into The Threaded Hole. The Screw Does Not Loosen When Subjected To Shock And Vibration, Better Than The General Locking Device. It Is Wear-Resistant When Disassembled Frequently, Increasing The Thread Life..
Features: Designed With A Certain Of Elastic, And Provides An Even Load On The Thread. It Is Resistant To Vibration. Greatly Improve The Strength Of The Screw Connection And Prolong The Service Life Of The Equipment..
304 Stainless Steel: Made Of 304 Stainless Steel, It Has Good Corrosion Resistance, Rust Resistance And Excellent Oxidation Resistance. 304 Stainless Steel Is One Of The Most Widely Used Chromium-Nickel Stainless Steels, With Wear Resistance, High Hardness..

Features

  • Wire Thread Inserts: Thread Size: 1/2-13 UNC; Nominal Length: 1.5D; Overall Length: 15mm / 0.59"; Type: Helical. Great for thread repair and maintenance work.
  • 304 Stainless Steel: Made of 304 stainless steel, it has good corrosion resistance, rust resistance and excellent oxidation resistance. 304 stainless steel is one of the most widely used chromium-nickel stainless steels, with wear resistance, high hardness.
  • Wide Applications: Widely used in mechanical equipment, construction machinery and other equipment that need thread repair. The helical thread insert is not easy to slip, with deep and clear thread, no deformation.
  • Features: Designed with a certain of elastic, and provides an even load on the thread. It is resistant to vibration. Greatly improve the strength of the screw connection and prolong the service life of the equipment.
  • Easy to Lock: The locking type wire thread insert can easily lock the screw into the threaded hole. The screw does not loosen when subjected to shock and vibration, better than the general locking device. It is wear-resistant when disassembled frequently, increasing the thread life.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $9.99 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon




  #19

uxcell M2.5 x 0.45 Spiral Flute Tap and 2.1mm Twist Drill Bit Set, Metric M35 Cobalt High Speed Steel Machine Threading Screw Thread Tap Tool for Stainless Steel

Asin: B09TVDMQ53   |   Model: a22010500ux0462   |   PartNumber: a22010500ux0462

Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Chips Are Not Easy To Stick To The Tool..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Flute Tap: Spiral Flute Design, Upward Chip Removal, Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Blind Holes And Sticky Materials, And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..

Features

  • Tap and Drill Bit: Tap thread size: M2.5 x 0.45, drill bit diameter: 2.1mm / 0.08". Cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance.
  • Spiral Flute Tap: Spiral flute design, upward chip removal, right hand thread cutting, fast tapping with accuracy. Suitable for processing blind holes and sticky materials, and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
  • Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Chips are not easy to stick to the tool.
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Weight: 0.00 pounds

Amazon Price: $8.79 | as of 05/12/2024 (5:03pm pst) *DETAILS

See On Amazon





Looking For Something Else? Search

Home & Garden


Home Improvement


Industrial


Electronics


Office


Car & Automotive


Sporting Goods


Beauty Supplies


Health & Personal Care


Fashion


Toys and Hobby



Additional Categories


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.