Black Exhaust tip - 2.5 Inch Inlet Bolt on Design- Stainless Steel Car Muffler Tips 2.5" ID x 3"OD x 8"L
Asin: B08L47YQTD | Ean: 0637405166651 | UPC: 637405166651
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Bolt-On Installation: Slide On Easily Over Your Existing Tailpipe, Then Secure In Place With Bolts..
Made By High Quality Stainless Steel With Black Coating To Enhance The Appearance Of Your Car..
This Muffler Tips Won’T Change The Function Of Your Car..
Size : Inlet Diameter 2.5 '' / Outlet Diameter 3''/ Length 8'' / Width 3''.
Features
- Please measure your own pipe and bumper cutout, and compare to this product fitment size.
- Size : Inlet Diameter 2.5 '' / Outlet Diameter 3''/ Length 8'' / width 3''
- Bolt-on Installation: slide on easily over your existing tailpipe, then secure in place with bolts.
- This muffler tips won t change the function of your car.
- Made by high quality stainless steel with black coating to enhance the appearance of your car.
- See more on Amazon...
Brand: Tritrust | Manufacturer: Tritrust
See On Amazon Similar To Black Exhaust tip 2.5 Inch
#1
Hycline Shock Pump for Mountain Bike, High Pressure 300 Psi for Front Fork and Rear Bicycle Suspension Air Pump with Gauge Fits Schrader & Presta Tire Valve-Titanium
Asin: B0BTV861JZ | Model: shock pump | PartNumber: shock pump
Features An Easy-To-Read 1.5-Inch Industrial Gauge With Psi And Bar Readouts. Max 300Psi/20 Bar Compression Power. Fine-Tuning The Exhaust Button Ensures Riders Can Set The Air Shock Or Fork Pressure Exactly According To Their Body Weight..
Portable Hand Pump, Aluminum Alloy Barrel, Light In Size, Can Be Put Into A Backpack And Carried Around. Measures 13X2.5 Inches And Weighs 0.17Kg..
The Ergonomically Designed Pull-Out T-Shaped Handle Is Easy And Labor-Saving; The Extended Hose Is 26.5Cm In Length, And The Hose Can Be Rotated 360°To Facilitate Pumping At Any Angle..
Easily And Freely Switch Between Presta And Schrader Valves, Makes A Perfect Mini Air Suspension Pump, For Road And Mountain Bike Connections, And Enables A Tight Seal With No Air Leaks..
Features
- Hycline shock pumps are specially designed for forks, shocks, and seat tubes. (Tips: If used for tires, it may take more time than a conventional home pump.)
- Easily and freely switch between Presta and Schrader valves, makes a perfect mini air suspension pump, for road and mountain bike connections, and enables a tight seal with no air leaks.
- Features an easy-to-read 1.5-inch industrial gauge with PSI and Bar readouts. Max 300PSI/20 Bar compression power. Fine-tuning the exhaust button ensures riders can set the air shock or fork pressure exactly according to their body weight.
- The ergonomically designed pull-out T-shaped handle is easy and labor-saving; the extended hose is 26.5cm in length, and the hose can be rotated 360 to facilitate pumping at any angle.
- Portable hand pump, aluminum alloy barrel, light in size, can be put into a backpack and carried around. Measures 13x2.5 inches and weighs 0.17kg.
- See more on Amazon...
Brand: Hycline | Manufacturer: Hycline
Weight: 0.37 Pounds
See On Amazon #2
MAMBAOUT Kids Motorcycle Goggles, 2-Pack Dirt Bike Goggles for Child, ATV Off-Road Racing Goggles for Boys Girls
Asin: B08ZCJTG7S | Model: US-MAMBAOUT-RidingGoggle-2Pack-02 | PartNumber: US-MAMBAOUT-RidingGoggle-2Pack-02
Absolutely Safety: It Fits Closely To Your Face Around Your Eyes To Protect You From Water, Dirty Dust, Glare And Strong Wind. Super Toughness, Protect Your Eyes Better. The Thick And Soft Layer Of Sponge On The Frame Is Padding Around Your Eye Sockets For Prolonged Wear Without Discomfort And Irritation. Transparency Pc Material, Never Be Worried If It Is Dropped Or Hit Fiercely, And You Will Get A Clear Vision With It..
Functional Air Vents & Adjustable Head Strap: We Redesign The Place Of Air Vents On The Top Of The Frame For A Better Air Cycle. So That You Will Anti Fog Up During Long-Term Use. Extra-Long Adjustable Elastic Head Strap Made Of Durable Nylon Suitable For Sports Lover With Different Head Size, With Or Without Use Helmet..
Comfortable, Safe And Wind-Proof : With The Safe, Elastic Abs Frame And The Durable, Impact Resistance Pc Lens, Which Protect You From Bright Sunshine, Strong Wind, Dust And Uv 400. Strong Impact-Resistance Lens And Durable Frame Protect You From Any Incidents Occurred. The Goggles Protect Your Eyes From Nearly All Dimensions..
Suitable For All Kinds Outdoor & Indoor Riding Activities: Perfect To Use Them When You Are Stepping On Your Cycling Or Motorcycle, Motocross, Dirt Bike Riding, Offroad Protective Combat, Climbing, Riding On Your Mountain Bike, Skydiving, Bungee Jumping, Playing Shooting Games. Get Rid Of The Fear Of Wind, Dust, Cold Air, Glare And Harmful Lights..
Features
- Suitable for Kids or Adult: Bring these 2 motocross goggles with your family or friends for outdoor riding sports. Goggles fit kids, teens, youth and adults (over 5 years old). Warm reminder, children should riding under the protection of adults.
- Suitable for All Kinds Outdoor & Indoor Riding Activities: Perfect to use them when you are stepping on your cycling or motorcycle, motocross, dirt bike riding, offroad protective combat, climbing, riding on your mountain bike, skydiving, bungee jumping, playing shooting games. Get rid of the fear of wind, dust, cold air, glare and harmful lights.
- Absolutely Safety: It fits closely to your face around your eyes to protect you from water, dirty dust, glare and strong wind. Super toughness, protect your eyes better. The thick and soft layer of sponge on the frame is padding around your eye sockets for prolonged wear without discomfort and irritation. Transparency PC material, never be worried if it is dropped or hit fiercely, and you will get a clear vision with it.
- Comfortable, Safe and Wind-Proof : With the safe, elastic ABS frame and the durable, impact resistance PC lens, which protect you from bright sunshine, strong wind, dust and UV 400. Strong impact-resistance lens and durable frame protect you from any incidents occurred. the goggles protect your eyes from nearly all dimensions.
- Functional Air Vents & Adjustable Head Strap: We redesign the place of air vents on the top of the frame for a better air cycle. So that you will anti fog up during long-term use. Extra-long adjustable elastic head strap made of durable nylon suitable for sports lover with different head size, with or without use helmet.
- See more on Amazon...
Brand: MAMBAOUT | Manufacturer: MAMBAOUT
Weight: 0.10 pounds
See On Amazon #3
Stainless Steel Car Exhaust Tip, 2.5" to 3.3" Universal Car Exhaust Pipe Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome-Plated Finish Tailpipe (Silver/A Style)
Asin: B0BFWBR5CF | Model: Silver/A Style | PartNumber: Silver/A Style
Size: The Size Of The Tail Pipe Is 2.5" X 3.3" X 5.5". It Is Suitable For Most Models With An Exhaust Pipe Diameter Of 2.1-1.5 Inches On The Market..
Package Contents: One Exhaust Pipe. If You Have Any Concerns Or Questions, Welcome To Contact Us Via Amazon Mail, Our Team Will Reply Within 24 Hours..
Easy To Install: Use Screw Connection, Loosen The Screws On The Tail Pipe, Put The Tail Pipe In The Proper Position At The Tail Of The Car Exhaust Pipe, And Then Tighten The Screws With A Wrench. It's Easy To Do It Yourself In Just 5 Minutes!.
Stylish Design: The Chrome Finish Gives Your Vehicle A Stylish Look, Not Only To Decorate Your Vehicle, But Also To Effectively Protect Your Exhaust Pipe From Dust, Rain And Sand, Preventing Deformation..
Features
- Durable Material: The exhaust pipe is made of solid stainless steel, which is firm and stable, not easy to fall off and avoid rust and deformation.
- Stylish Design: The chrome finish gives your vehicle a stylish look, not only to decorate your vehicle, but also to effectively protect your exhaust pipe from dust, rain and sand, preventing deformation.
- Size: The size of the tail pipe is 2.5 x 3.3 x 5.5. It is suitable for most models with an exhaust pipe diameter of 2.1-1.5 inches on the market.
- Easy To Install: use screw connection, loosen the screws on the tail pipe, put the tail pipe in the proper position at the tail of the car exhaust pipe, and then tighten the screws with a wrench. It's easy to do it yourself in just 5 minutes!
- Package Contents: One exhaust pipe. If you have any concerns or questions, welcome to contact us via Amazon Mail, our team will reply within 24 hours.
- See more on Amazon...
Brand: Moly Magnolia | Manufacturer: Moly Magnolia
Dimensions: 0.04 x 5.50 x 3.30 Inches
See On Amazon #4
Stainless Steel Car Exhaust Tip, 2.5" to 3.3" Adjustable Car Decoration Chrome-Plated Finish Exhaust Tailpipe, Universal Car Exhaust Pipe Modification Tail Throat Tail Pipe (Silver #Straight)
Asin: B0C9J9V4Z1
★Easy To Install: Our Tailpipe Is Easy To Install,No Need To Replace Any Parts,No Weld Needed. No Drill Needed. Just Loosen The Screws On The Tail Pipe, Put The Tail Pipe In The Proper Position At The Tail Of The Car Exhaust Pipe, And Then Tighten The Screws With A Wrench..
★Package Contents: You Will Receive 1Pcs Exhaust Pipe. If You Have Any Questions, Please Contact Us By Email And We Will Get Back To You As Soon As Possible To Solve Your Problem. Thank You For Your Love Of Our Products. Enjoy Your Shopping..
★Widely Used: The Exhaust Tailpipe Is 2.5" X 3.3" X 5.5"(6.3Cmx 8.3Cmx 14Cm), It Is Suitable For Most Models With An Exhaust Pipe Diameter Of 2.1-1.5 Inches On The Market. Please Measure Your Size Before Buying..
★Elegant Design: The Chrome Finish Gives Your Vehicle A Stylish Look, Exquisite Workmanship,Make Your Car Stand Out In A Crowd. But Also To Effectively Protect Your Exhaust Pipe From Dust, Rain And Sand, Preventing Deformation..
Features
- High Quality: Our exhaust pipe is made of high-quality stainless steel, which effectively prevents rust and deformation. provides a stylish look for your vehicle instead of the rusted old tailpipe.
- Elegant Design: The chrome finish gives your vehicle a stylish look, Exquisite workmanship,make your car stand out in a crowd. but also to effectively protect your exhaust pipe from dust, rain and sand, preventing deformation.
- Easy To Install: Our tailpipe is easy to install,no need to replace any parts,No weld needed. No drill needed. Just loosen the screws on the tail pipe, put the tail pipe in the proper position at the tail of the car exhaust pipe, and then tighten the screws with a wrench.
- Widely Used: The exhaust tailpipe is 2.5 x 3.3 x 5.5(6.3cmX 8.3cmX 14cm), It is suitable for most models with an exhaust pipe diameter of 2.1-1.5 inches on the market. Please measure your size before buying.
- Package Contents: You will receive 1pcs exhaust pipe. If you have any questions, please contact us by email and we will get back to you as soon as possible to solve your problem. Thank you for your love of our products. Enjoy your shopping.
- See more on Amazon...
Brand: CmeRto | Manufacturer: CmeRto
See On Amazon #5
Zlirfy Exhaust Clamp Exhaust Pipe Clamp,2.0 2.25 2.5 2.75 3.0 4.0 Butt Joint Stainless Steel Clamp Band,Universal Widening Clamp Butt Joint Exhaust Clamp,Fit for Exhaust Pipe (2.25inch)
Asin: B0C4F5J6PG | Model: 419PQGJ001 | PartNumber: 419PQGJ001
[Design Features] This Stainless Steel Clamp Band Clamp Is Designed With A 360 Degree Full Clamping Zone, And The Clamping Force Is Evenly Distributed Throughout The Entire 360 Degree Range To Prevent Leakage And Control Pipeline Deformation..
[Application] Sealed Exhaust Clamps Are Maintenance Components For Silencers. Narrow Band Clamps Can Be Used For Catalytic Converters, Exhaust Nozzles, Exhaust Manifolds, Exhaust Resonators, Exhaust Hoses, And Exhaust Muffler Maintenance Projects..
[Easy To Install] This Exhaust Band Clamp Sleeve Comes With Fastening Bolts. You Only Need To Tighten Or Lose The Bolts To Connect Or Release. No Welding Required, Easy To Use..
[6 Specifications]Our 2.5 Inch Exhaust Clamp Connects A Pipe With An Outer Diameter Of 2.5 "To A Pipe With An Outer Diameter Of 2.5". We Have A Total Of 6 Different Sizes Of Exhaust Clamps For You To Choose From And Purchase. Please Confirm The Specifications And Dimensions Before Purchasing..
Features
- [High Quality and Durability]The exhaust pipe clamp is made of high-quality stainless steel, which is rust proof, waterproof, durable, and corrosion-resistant. It can be reused and has a long service life.
- [6 Specifications]Our 2.5 inch exhaust clamp connects a pipe with an outer diameter of 2.5 to a pipe with an outer diameter of 2.5. We have a total of 6 different sizes of exhaust clamps for you to choose from and purchase. Please confirm the specifications and dimensions before purchasing.
- [Design Features] This stainless steel clamp band clamp is designed with a 360 degree full clamping zone, and the clamping force is evenly distributed throughout the entire 360 degree range to prevent leakage and control pipeline deformation.
- [Easy to Install] This exhaust band clamp sleeve comes with fastening bolts. You only need to tighten or lose the bolts to connect or release. No welding required, easy to use.
- [Application] Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
Warranty: no
See On Amazon #6
LOUDER Aluminum Alloy Universal Turbo Whistle,Turbo Sound Exhaust Muffler Pipe Whistle Car Roar Maker, Car Tail Whistle,Car Blow off valve Tip Simulator Whistler (L_Black)
Asin: B0B9RZJ8H3 | Model: x00124a6a | PartNumber: x00124a6a | Ean: 0759397348294 | UPC: 759397348294
🚗🚗🚗Features: With This Universal Turbocharged Whistle, Your Car Will Make A Very Beautiful Sound When Starting And Driving, Which Is Unprecedented!.
🚗🚗🚗Sincere Service: If You Have Any Questions About Turbo Exhaust Whistle, Please Contact Us. We Will Try Our Best To Provide You With The Best Service And Quickly Add Silencer Sound To The Shopping Cart For Purchase!.
🚗🚗🚗Note: The Metal Material Has Friction During Transportation, Please Allow The Product To Have Slight Flaws!.
🚗🚗🚗Location: After Installing The Motorcycle Whistle, The Pressure Blowing From The Turbo Sound Whistle Will Make Your Vehicle Sound Like A Turbocharger With A Turbocharger System Or Exhaust Valve. Car Turbo Whistle Universal Is Easy To Install, And Has A Beautiful Appearance And A Very Stylish Appearance. This Is The Best Choice For Buying A Vehicle!.
🚗🚗🚗Material: The Turbo Muffler Is Made Of Lightweight Aluminum Alloy Cnc And Processed From 6061 T-6 Aluminum, Which Is Durable, Rust-Proof, Corrosion-Resistant And Wear-Resistant.
Features
- Size: Modified turbo Car whistle, do not install a pipe entrance larger than 2.5 inches. It has the function of direct replacement. The exact matching kit can be installed in the car exhaust pipe. Strict quality inspections have been conducted to ensure that it meets product standards and automotive turbo whistle is suitable for all vehicles.
- Material: The turbo muffler is made of lightweight aluminum alloy CNC and processed from 6061 T-6 aluminum, which is durable, rust-proof, corrosion-resistant and wear-resistant
- Features: With this universal turbocharged whistle, your car will make a very beautiful sound when starting and driving, which is unprecedented!
- Location: After installing the motorcycle whistle, the pressure blowing from the turbo sound whistle will make your vehicle sound like a turbocharger with a turbocharger system or exhaust valve. car turbo whistle universal is easy to install, and has a beautiful appearance and a very stylish appearance. This is the best choice for buying a vehicle!
- Sincere service: If you have any questions about turbo exhaust whistle, please contact us. We will try our best to provide you with the best service and quickly add silencer sound to the shopping cart for purchase!
- Note: The metal material has friction during transportation, please allow the product to have slight flaws!
- See more on Amazon...
Brand: Gowxs | Manufacturer: Gowxs
Dimensions: 0.10 x 0.10 x 0.10 inches
See On Amazon #7
AOCISKA 2 Packs Exhaust Clamp,2.0 2.25 2.5 3.0 Stainless Steel Joint Exhaust Pipe Muffler Clamp Band Butt Joint Band Clamp Sleeve Coupler,Used for Exhaust Pipe,Muffler,Elbow (2.25inch)
Asin: B0BY89XY7F | Model: 199PQGKG001 | PartNumber: 199PQGKG001
[Easy To Install] The Exhaust Pipe Clamp Is Designed Without Welding, Which Is Fast, Convenient And Accurate. It Allows Flexible Disassembly And Repair, And Can Be Reused..
[Features]The Butt Clamp Is A Simple And Effective Method To Connect Exhaust System Components (Such As Pipes, Mufflers And Catalytic Converters). The Reaction Block Provides A 360 ° Uniformly Distributed Tensile Force To Prevent Pipe Deformation And Form A Seal Around The Connected Exhaust Components..
[Unified Structure] These Exhaust Pipe Clamps Have A Unified Structure, Which Minimizes The Complexity Of The Number Of Parts, And Maximizes The Material Efficiency, Thus Reducing The Weight..
[Various Specifications] Our 2.5-Inch Exhaust Pipe Clamp Connects 2.5 "Od Pipe To 2.5" Od Pipe. In Addition, We Provide Three Different Sizes To Meet Your Needs. Please Confirm The Specification And Size Before Purchasing..
Features
- [High Quality] Stainless steel lap joint exhaust pipe clamp is made of high-quality 304 stainless steel and galvanized, which can resist water corrosion and rust.
- [Various Specifications] Our 2.5-inch exhaust pipe clamp connects 2.5 OD pipe to 2.5 OD pipe. In addition, we provide three different sizes to meet your needs. Please confirm the specification and size before purchasing.
- [Easy to Install] The exhaust pipe clamp is designed without welding, which is fast, convenient and accurate. It allows flexible disassembly and repair, and can be reused.
- [Unified Structure] These exhaust pipe clamps have a unified structure, which minimizes the complexity of the number of parts, and maximizes the material efficiency, thus reducing the weight.
- [Features]The butt clamp is a simple and effective method to connect exhaust system components (such as pipes, mufflers and catalytic converters). The reaction block provides a 360 uniformly distributed tensile force to prevent pipe deformation and form a seal around the connected exhaust components.
- See more on Amazon...
Brand: AOCISKA | Manufacturer: 199PQGKG001
See On Amazon #8
TriTrust Exhaust Tip, 2.5-3 inch inlet adjustable,Fit 2.5''/2.75''/3'' Outer diameter Tailpipe, 4.5'' Outlet 7'' Long Muffler Tip, Black Powder Coated Stainless Steel Tail Tip
Asin: B08CGGGCWQ | Model: T00047BK | PartNumber: T00047BK | Ean: 0637405166408 | UPC: 637405166408
Size: / Length 7 '' / Width 4.5'' / Inlet Diameter 3 3/8 '' / Outlet Diameter 4.5''.
Installation: Clamp-On Installation : They Are Attached To The Tailpipe By Clamps And Screws (Included)..
Material: This Muffler Tips Are Made By High Quality Stainless Steel With Black Coating..
Fitment: This Exhaust Tips Fit Pipes Measuring Between 2.5 And 3 Inches In Diameter..
Features
- MEASURE FIRST: Please measure your own pipe and bumper cutout, and compare to this product fitment size.
- FITMENT: This exhaust tips fit pipes measuring between 2.5 and 3 inches in diameter.
- SIZE: / Length 7 '' / width 4.5'' / Inlet Diameter 3 3/8 '' / Outlet Diameter 4.5''
- MATERIAL: This muffler tips are made by high quality stainless steel with black coating.
- INSTALLATION: Clamp-on installation : They are attached to the tailpipe by clamps and screws (Included).
- See more on Amazon...
Brand: Tritrust | Manufacturer: YLC
Dimensions: 0.04 x 7.00 x 4.50 inches
See On Amazon #9
Upower Pack of 2 Exhaust Tip 2.5 inch Inlet 4 inch Outlet 9" Long 304 Stainless Steel 2.5" to 4" Diesel Exhaust Tailpipe Tip Double Wall Slant Cut
Asin: B074GQCSGM
Weld On Installation And Double Wall Slant Design.
There Is 1 Year Warranty For Each Purchase. Before To Buy, Please Make Sure The Brand Logo "Upower"..
Materials: Made Of 304 Stainless Steel Has Very Strong Anti-Corrosive, Never Rusty..
Pack Of 2 Exhaust Tips; Professional Installation Is Highly Recommended; No Instruction Included.
Features
- Fits: To ensure proper fit make sure your exhaust INLET diameter is 2.5 Inch
- Pack of 2 exhaust tips; Professional installation is highly recommended; No instruction included
- Weld On installation and Double Wall Slant design
- Materials: Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty.
- There is 1 year warranty for each purchase. Before to buy, please make sure the Brand Logo Upower.
- See more on Amazon...
Brand: Upower | Manufacturer: PartsSquare
Dimensions: 4.72 x 10.24 x 9.06 inches
Warranty: 1 Year
See On Amazon #10
AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Black Powdercoat Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On
Asin: B07LGRLT7J | Model: TSET-0050 | PartNumber: TSET-0050 | Ean: 0810076083070 | UPC: 810076083070
Stylish & Pleasant-Sounding: Sleek Rolled-Edge Angle Cut And Thicker Inner Wall Design Make Your Car Sounds Rumble And Crackle For A More Powerful And Unique Sound While Giving Your Car A New & Sporty Appeal.
Maintenance Tips: Please Routinely Clean Off The Debris, Cement, Oil, Dust And Dirt On The Surface Or The Interior Of The Exhaust Tips Since Good Maintenance Ensures A Longer Service Life Of Exhaust(Note: Professional Installation Would Be Highly Recommended).
Easy Installation: The Bolt/ Clamp-On Design Makes It Super Easy To Fasten To Your Exhaust Pipe With No Drilling Or Welding Needed.
Anti-Deformation & Rustproof: Built From High-Grade Stainless Steel With Black Powder Coated Finished, Our Exhaust Tips Effectively Resist Heat, Rust And Deformation To Protect & Decorate Your Tailpipe System Well; Plus, A Drainage Hole Helps Drain Water To Prevent Rust.
Features
- Dimension: standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length); universal fit for Most vehicles with 1.5"/1.75"/2.0"/2.25"/2.5" outlet diameter exhaust pipes (Please make sure the outlet outer diameter of your vehicle tailpipe is between 1.5-inch and 2.5-inch before purchase)
- Anti-deformation & rustproof: built from high-grade stainless steel with black powder coated finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well; plus, a drainage hole helps drain water to prevent rust
- Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal
- Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with no drilling or welding needed
- Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust(NOTE: Professional installation would be highly recommended)
- See more on Amazon...
Brand: AUTOSAVER88 | Manufacturer: AUTOSAVER88
Dimensions: 4.00 x 9.00 x 3.00 Inches | Weight: 2.00 Pounds
Warranty: 1 Year Warranty
See On Amazon #11
A-KARCK Carbon Fiber Exhaust Tip 2.5" Inlet to Dual 4" Outlet, High Temperature Resistance 9.8" Long Stainless Steel Tailpipe tip, Set of 2
Asin: B0BTT2YHPH | Model: Exhaust Tip | PartNumber: Exhaust Tip
Upgrade Appearance: Carbon Fiber Exhibits Its Unique Texture In Sunlight, Endowing The Vehicle With High-End Quality. The Inner Layer Is Mirror Polished, Beautiful And Fashionable..
Measure Before Buying: Measure Your Existing Exhaust Pipe To Make Sure It Is 2.5" Od. Measure Bumper Space To Ensure Width Is Greater Than 7.5 Inch..
Easy Installation: Simply Slide The Tip And Clamp Onto The Exhaust Pipe And Tighten The Screws. Installation Is Complete With Just A Wrench..
Never Rust: The Inner Tank Is Made Of Stainless Steel, Precision Polished. The Shell Is Made Of Carbon Fiber. Resistant To High Temperatures And Corrosion, Perfectly Withstands The High Temperatures Of Exhaust..
Features
- 2.5" ID EXHAUST TIP: Inlet diameter - 2.5 inch ID, Outlet diameter 4.0 inch OD, Overall length 9.8 inch. Universal fits 2.5" outside diameter existing tailpipe.
- NEVER RUST: The inner tank is made of stainless steel, precision polished. The shell is made of carbon fiber. Resistant to high temperatures and corrosion, perfectly withstands the high temperatures of exhaust.
- UPGRADE APPEARANCE: Carbon fiber exhibits its unique texture in sunlight, endowing the vehicle with high-end quality. The inner layer is mirror polished, beautiful and fashionable.
- EASY INSTALLATION: Simply slide the tip and clamp onto the exhaust pipe and tighten the screws. Installation is complete with just a wrench.
- MEASURE BEFORE BUYING: Measure your existing exhaust pipe to make sure it is 2.5 OD. Measure bumper space to ensure width is greater than 7.5 inch.
- See more on Amazon...
Brand: A-KARCK | Manufacturer: A-KARCK
Dimensions: 8.20 x 9.80 x 2.50 Inches
Warranty: 1 year warranty
See On Amazon #12
A-KARCK Exhaust Tip 3 Inch Inlet, 3" Inlet 4" Outlet 12" Long Black Coated Finish Muffler Tip For Truck Tailpipe, Stainless Steel Rolled Edge
Asin: B082CPZX7B | Model: New304012RACBK | PartNumber: New304012RACBK | Ean: 0883343259508 | UPC: 883343259508
Appearance:The Pure And Elegant Black Exterior Can Perfectly Decorate Your Vehicle..
Unique Design: Bottom Has A Drainage Hole, Which Will Not Affect The Appearance And Can Drain Smoothly To Avoid Rust..
Bolt On Installation: No Welding Or Drilling Is Needed, Just Slide The Tip Into Place On The Tailpipe And Tighten With A Wrench..
Material: Made Of Stainless Steel To Protect The Existing Tailpipe From Corrosion And Deformation. Black Coating Prevents Rain Erosion..
Features
- DIMENSION: 3 inch inlet diameter, 4 inch outlet diameter, 12 inch overall length, Universal fits 3 inch outer diameter tailpipe.
- MATERIAL: Made of stainless steel to protect the existing tailpipe from corrosion and deformation. Black coating prevents rain erosion.
- APPEARANCE:The pure and elegant black exterior can perfectly decorate your vehicle.
- BOLT ON INSTALLATION: No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench.
- UNIQUE DESIGN: Bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust.
- See more on Amazon...
Brand: A-KARCK | Manufacturer: A-KARCK
Dimensions: 12.00 x 4.00 x 4.00 inches
See On Amazon #13
DEWHEL Universal Aluminum Turbo Sound Exhaust Muffler Pipe Whistle Car Blow off valve BOV Tip Simulator Whistler (XL-Black)
Asin: B00XZYTANG | Model: Turbo Sound | PartNumber: Turbo Sound | Ean: 0700855063082 | UPC: 700855063082
Do Not Fit Piping Inlet Which Is More Than 2.5Inch.
In Package:1 Pc Turbo Sound Simulator Whistle.
Sounds Like A Turbo Vehicle With The Turbo System Or Blow Off Valve..
Easy Installation,Universal Fits For All Vehicle.
Features
- Made of light weight aluminum CNC Machined from 6061 T-6 Aluminum
- Easy installation,Universal Fits for all vehicle
- Do not fit piping inlet which is more than 2.5inch
- Sounds like a turbo vehicle with the turbo system or blow off valve.
- In package:1 pc Turbo Sound Simulator Whistle
- See more on Amazon...
Brand: DEWHEL | Manufacturer: Dewhel
See On Amazon #14
Upower 2.5 inch Inlet 4 inch Outlet Exhaust Tip 2.5" to 4" Exhaust Tailpipe Tips 9" Long Black Weld On 1.2mm Thick Stainless Steel 2 1/2 Inlet Rolled End (Pack of 2)
Asin: B08G1F6QQ6
【Material】High Quality Exhaust Tip Tailpipe Built With Stainless Steel With Black Coating. Durable And Anti-Corrosive,Never Rusty..
【1 Year Warranty】No Instruction Is Included. Professional Installation Is Highly Recommended..
【Wide Application】Universal Fits Any 2 1/2" Outlet Or 2.6" Inlet Trucks Car Exhaust Tail Pipe..
【Design】Weld On - Exhaust Tip Straight Cut- Rolled End.
Features
- Upower Exhaust Tip Dimension 2.5 inch inlet diameter; 4 inch outlet diameter; Overall Length:9 inch(2pcs Exhaust Tip are same)
- Design Weld On - Exhaust Tip Straight Cut- Rolled End
- Material High Quality Exhaust Tip Tailpipe built with Stainless steel with black coating. Durable and Anti-corrosive,never Rusty.
- Wide Application Universal fits any 2 1/2 Outlet or 2.6 Inlet trucks car exhaust tail pipe.
- 1 Year Warranty No instruction is included. Professional installation is highly recommended.
- See more on Amazon...
Brand: Upower | Manufacturer: Upower
Dimensions: 0.04 x 9.00 x 2.50 inches
See On Amazon #15
SYMOTTEC 1/8'' to 3-1/2'' Tail Exhaust Pipe Expander Muffler Spreader Tool Set Compatible with Most Vehicles and Trucks
Asin: B09F616BBV | Model: SY-1-100124 | PartNumber: SY-1-100124
Drop Forged And Heat Treated Steel Construction For Strength And Hardness And Through Strict Quality Inspection. Suitable For Family And Professional Mechanic. Plug And Play, You Can Buy It With Confidence..
Important Notice!!! (1) When Expanding, The Beveled Steel Cs Of The Expander Must Be Fully Inserted Into The Pipe, Not Half; (2) Try To Use A Manual Ratchet Or Manual Wrench To Turn The Pipe Support Tool To Expand The Pipe, Rather Than Electric Ratchet; (3) Avoid Twisting The Expander With Excessive Force..
Kit Includes 1 X Small Expander: 1-1/8" To 1-3/4", 1 X Medium Expander: 1-1/2" To 2-1/2", 1 X Large Expander: 2-1/8" To 3-1/2, 6 X Extra O-Rings..
This Tail Pipe Expander Set Includes Three Different Expander Sizes, Can Work With All 1-1/8Inch To 3-1/2Inch Id Thin-Wall Pipes And Compatible With Most Vehicles And Trucks..
Features
- This Pipe Expander Muffler Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches.
- This Tail Pipe Expander set includes three different expander sizes, can work with all 1-1/8inch to 3-1/2inch ID thin-wall pipes and compatible with most vehicles and trucks.
- Drop forged and heat treated steel construction for strength and hardness and through strict quality inspection. Suitable for family and professional mechanic. Plug and play, you can buy it with confidence.
- Kit Includes 1 x small expander: 1-1/8 to 1-3/4, 1 x medium expander: 1-1/2 to 2-1/2, 1 x large Expander: 2-1/8 to 3-1/2, 6 x extra O-rings.
- IMPORTANT NOTICE!!! (1) When expanding, the beveled steel cs of the expander must be fully inserted into the pipe, not half; (2) Try to use a manual ratchet or manual wrench to turn the pipe support tool to expand the pipe, rather than electric Ratchet; (3) Avoid twisting the expander with excessive force.
- See more on Amazon...
Brand: SYMOTTEC | Manufacturer: SYMOTTEC
See On Amazon #16
AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5" Inlet 4" Outlet 9" Overall Length Black Powder Coated Finish Tailpipe Universal Stainless Exhaust Tips for 2.5" O.D. Tailpipe, Rolled Edge, Bolt On
Asin: B07LGFLQWY | Model: TSET-0045 | PartNumber: TSET-0045 | Ean: 0810076082837 | UPC: 810076082837
Stylish & Pleasant-Sounding: Sleek Rolled-Edge Angle Cut And Thicker Inner Wall Design, Make Your Car Sounds Rumble And Crackle For A More Powerful And Unique Sound; Meanwhile, The Black Powder Coated Finished Offers Your Car With A Elegant & Mysterious Appeal.
Maintenance Tips: Please Routinely Clean Off The Debris, Cement, Oil, Dust And Dirt On The Surface Or The Interior Of The Exhaust Tips Since Good Maintenance Ensures A Longer Service Life Of Exhaust(Note: Professional Installation Would Be Highly Recommended).
Easy Installation: The Bolt-On Design Makes It Super Easy To Fasten To Your Exhaust Pipe With M6 Allen Key, No Drilling Or Welding Needed.
Anti-Deformation & Rustproof: Built From High-Grade Stainless Steel, Our Exhaust Tips Effectively Resist Heat, Rust And Deformation To Protect & Decorate Your Tailpipe System Well; Plus, A Drainage Hole Helps Drain Water To Prevent Rust.
Features
- Dimension: standard 2.5" x 4" x 9"(inlet, outlet, overall length); ONLY universal fit for vehicles with 2.5-inch outlet diameter exhaust pipes (Please make sure the outer diameter of your tailpipe is 2.5" before purchase)
- Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well; plus, a drainage hole helps drain water to prevent rust
- Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound; meanwhile, the black powder coated finished offers your car with a elegant & mysterious appeal
- Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M6 Allen key, no drilling or welding needed
- Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust(NOTE: Professional installation would be highly recommended)
- See more on Amazon...
Brand: AUTOSAVER88 | Manufacturer: AUTOSAVER88
Dimensions: 4.00 x 9.00 x 2.50 inches | Weight: 1.00 Pounds
Warranty: 1 Year Warranty
See On Amazon #17
Upower 2PCS Exhaust Tip 2.5" Inlet 2" x 6" Outlet 10" Long Rolled Rectangle Exhaust Tailpipe Tips Stainless Steel Polished Diesel Pipe Weld On
Asin: B07DKCLD6L
【Material】High Quality Stainless Steel T304 Mirror Polished. Durable And Anti-Corrosive,Protect The Tips From Sun And Rain,Avoid Rusting And Deformation.
【1 Year Warranty】No Instruction Is Included. Professional Installation Is Highly Recommended..
【Wide Application】Fits 2.5" Inlet Diameter Car Exhaust Tail Pipe..
【Design】Weld On - Rolled Edge - Angle Cut. Note:Regularly Walking Uphill Can Better Drain The Water In The Exhaust Tip.
Features
- Dimension 2.5 inch Inlet; 2" x 6" inch Outlet ; 10 inch Overall Length.
- Design Weld On - Rolled Edge - Angle Cut. Note:Regularly walking uphill can better drain the water in the exhaust tip
- Material High quality stainless steel T304 mirror polished. Durable and Anti-corrosive,protect the tips from Sun and Rain,avoid rusting and deformation
- Wide Application Fits 2.5 INLET diameter car exhaust tail pipe.
- 1 Year Warranty No instruction is included. Professional installation is highly recommended.
- See more on Amazon...
Brand: Upower | Manufacturer: Partssquare
Dimensions: 0.04 x 10.00 x 6.00 inches
Warranty: 1 Year
See On Amazon #18
ESEWALAS Stainless Steel Exhaust Clamp,2.0 2.25 2.5 2.75 3.0 4.0 Butt Joint Exhaust Pipe Muffler Band Clamp Sleeve Coupler,Exhaust Pipe Clamp Exhaust Band Clamp (2.5inch)
Asin: B0C4GDPNC2 | Model: 380PQGKG001 | PartNumber: 380PQGKG001
[Size] Connect A Pipeline With An Outer Diameter Of 2.5 "To A Pipeline With An Outer Diameter Of 2.5". In Addition, We Offer Five Sizes Of Products For You To Choose From, Namely 2.0 "2.25" 2.75 "3.0" 4.0 ", To Meet Your Needs. Please Confirm The Specifications And Dimensions Before Purchasing..
[Application] Sealed Exhaust Clamps Are Maintenance Components For Silencers. Narrow Band Clamps Can Be Used For Catalytic Converters, Exhaust Nozzles, Exhaust Manifolds, Exhaust Resonators, Exhaust Hoses, And Exhaust Muffler Maintenance Projects..
[Features] The Sealed Exhaust Clamp Is A Maintenance Component Of The Muffler, And The Reaction Block Provides A 360 ° Evenly Distributed Tensile Force To Prevent Pipeline Deformation And Form A Seal Around The Connected Exhaust Components..
[Non Welded Design] The Exhaust Pipe Clamp Adopts A Non Welded Design, Which Is Easy To Install Or Disassemble. Double Stacked Self-Locking Lock Washers Can Prevent Nuts From Loosening..
Features
- [High Quality] Stainless steel lap joint exhaust pipe clamp is made of high-quality 304 stainless steel, galvanized, with water corrosion resistance and rust prevention performance.
- [Non Welded Design] The exhaust pipe clamp adopts a non welded design, which is easy to install or disassemble. Double stacked self-locking lock washers can prevent nuts from loosening.
- [Size] Connect a pipeline with an outer diameter of 2.5 to a pipeline with an outer diameter of 2.5. In addition, we offer five sizes of products for you to choose from, namely 2.0 2.25 2.75 3.0 4.0 , to meet your needs. Please confirm the specifications and dimensions before purchasing.
- [Features] The sealed exhaust clamp is a maintenance component of the muffler, and the reaction block provides a 360 evenly distributed tensile force to prevent pipeline deformation and form a seal around the connected exhaust components.
- [Application] Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.
- See more on Amazon...
Brand: ESEWALAS | Manufacturer: ESEWALAS
See On Amazon #19
Upower 2 PCS 2.5" to 4" Exhaust Tips 18" Long Stainless Steel Weld-On Exhaust Tail Pipe
Asin: B07DK7TY3W | Model: 193481 | PartNumber: 193481
【Materials】Made Of High Quality Stainless Steel Has Very Strong Anti-Corrosive, Never Rusty. Please Clean The Exhaust Tip Regularly To Expand Its Longevity..
【Package Includes】Pack Of 2 Upower Exhuast Tip; Each Tip Comes With 12 Months Warranty..
【Fits】To Ensure Proper Fit Make Sure Your Exhaust Inlet Diameter Is 2.5 (2 1/2) Inch..
【Features】Weld On Installation And Angled Cut Design. Professional Installation Is Highly Recommended; No Instruction Included.
Features
- Dimension 2.5x4x18 Exhaust Tip. ID: 2.5" OD: 4" Length: 18" Angled Chrome Muffler Tip.
- Features Weld On installation and Angled Cut design. Professional installation is highly recommended; No instruction included
- Materials Made of High quality Stainless steel has very strong anti-corrosive, Never Rusty. Please clean the exhaust tip regularly to expand its longevity.
- Fits To ensure proper fit make sure your exhaust INLET diameter is 2.5 (2 1/2) Inch.
- Package includes Pack of 2 Upower Exhuast Tip; Each Tip comes with 12 months warranty.
- See more on Amazon...
Brand: Upower | Manufacturer: Partssquare
Warranty: 1 Year
See On Amazon #20
Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5" Outlet 3.2" Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)
Asin: B0BMKH8YG6 | Model: Black/Straight | PartNumber: Black/Straight
【Dimensions】: The Length Of It Is 5.7", Inlet Size Is 2.5 Inch While Outlet Size Is 3.2 Inch. It Is Suitable For Straight Pipe Models With An Exhaust Pipe Diameter Of Less Than 2.5". Crimmed And Angled Cut Design, Black Powder Coated. There Are Two Kinds Of Exhaust Tips For You To Choose, Straight Shaped And Curved Shape Exhaust Pipes Can Totally Meet Your Demand..
【Installation】: The Installation Process Does Not Require Replacing Any Parts, Nor Does It Require Drills Or Welding, Only Two Bolts Are Required To Install The Tip To The Pipe, Tighten The Screws And Fix The Bolts, And The Exhaust Head Can Be Easily Fixed On The Exhaust Pipe..
【Material】: This Exhaust Pipe Is Made Of Stainless Steel With Slanted Tip Shape. Due To Its Stainless Steel Material, It Is Durable And Corrosion Resistant. It Protect Your Original Tip From Sunlight And Rain, Avoid Rust And Deformation. It Provides Your Vehicle With A Stylish Look. Compared With Rusty Exhaust Pipes, It Has A Long Service Life..
【Car Decoration】: This Exhaust Tips Is Available In Two Colors, Matte Black And Gold, This Exhaust Pipe Is Beautiful And Generous, Can Decorate Your Car Well And Make It Look More Stylish. After Installing This Exhaust Pipe, Your Car Will Look Very Sporty, The Black One Is Understated And Generous, The Gold One Is Stylish And Dynamic..
Features
- Protect Exhaust Pipes : This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water.
- Car Decoration : This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic.
- Dimensions : The length of it is 5.7, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand.
- Material : This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect your original tip from sunlight and rain, avoid rust and deformation. It provides your vehicle with a stylish look. Compared with rusty exhaust pipes, it has a long service life.
- Installation : The installation process does not require replacing any parts, nor does it require drills or welding, only two bolts are required to install the tip to the pipe, tighten the screws and fix the bolts, and the exhaust head can be easily fixed on the exhaust pipe.
- See more on Amazon...
Brand: 8sanlione | Manufacturer: 8sanlione
Dimensions: 1.00 x 2.00 x 2.00 inches | Weight: 0.40 Pounds
Warranty: NO
See On Amazon
Looking For Something Else?
Search