TunaMax (2 Pack) 1/2" IPS Fire Sprinkler Escutcheons 3/4" Adjustment Sprinkler Head Cover Plate Trim Ring Chrome
Asin: B08L6BYK8R | Model: EC02 | PartNumber: EC02 | Ean: 0705124113529 | UPC: 705124113529
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.ποΈEach Two-Piece Escutcheon Provides For Semi-Recessed Sprinkler Installations Having Total Adjustments 19.1Mm(3/4β) From The Flush Position. The Adjustment Provided By These Escutcheons Reduces The Accuracy To Which Fixed Piping To The Sprinklers Must Be Cut, While Providing A Decorative Recessed Sprinkler Installation.
ποΈ This Fire Sprinkler Cover Is Only For 1/2β Sprinkler Head, Not For 3/4β Sprinkler Head. The Recessed Escutcheons Must Be Installed And Maintained In Compliance With The Applicable Standards Of The National Fire Protection Association (Nfpa). The Owner Is Responsible For Maintaining Their Fire Protection System And Devices In Proper Operating Condition.
ποΈ The Separable Two-Piece Design Allows Installation Of The Sprinklers And Pressure Testing Of The Fire Protection System/Evaluation Of Leak Tightness, Prior To Installation Of A Suspended Ceiling Or Application Of The Finish Coating To A Fixed Ceiling. It Also Permits The Removal Of Suspended Ceiling Panels, For Access To Building Service Equipment, Without Having To First Shut Down The Fire Protection System And Remove Sprinklers.
ποΈ Absence Of A Sprinkler Escutcheon To Cover A Clearance Hole Can Delay The Sprinkler Head Operation In A Fire Situation. Two-Piece Flush Escutcheon Is Used To Improve The Overall Appearance Of A Sprinkler Installation By Concealing The Clearance Holes Required For The Connecting Piping And Fittings To The Sprinkler. Fire Sprinkler Covers Are Intended For Use In Areas With Finished Walls Or Overhead Ceilings.
Features
- This fire sprinkler trim ring fit perfectly 1/2" fire sprinkler head, and for both residential and commercial use. Recessed sprinkler head escutcheons are designed for recessed installation with certain pendent and horizontal sidewall fire sprinklers
- Absence of a sprinkler escutcheon to cover a clearance hole can delay the sprinkler head operation in a fire situation. Two-piece flush escutcheon is used to improve the overall appearance of a sprinkler installation by concealing the clearance holes required for the connecting piping and fittings to the sprinkler. Fire sprinkler covers are intended for use in areas with finished walls or overhead ceilings
- Each two-piece escutcheon provides for semi-recessed sprinkler installations having total adjustments 19.1mm(3/4 ) from the flush position. The adjustment provided by these escutcheons reduces the accuracy to which fixed piping to the sprinklers must be cut, while providing a decorative recessed sprinkler installation
- The separable two-piece design allows installation of the sprinklers and pressure testing of the fire protection system/evaluation of leak tightness, prior to installation of a suspended ceiling or application of the finish coating to a fixed ceiling. It also permits the removal of suspended ceiling panels, for access to building service equipment, without having to first shut down the fire protection system and remove sprinklers
- This fire sprinkler cover is only for 1/2 sprinkler head, not for 3/4 sprinkler head. The recessed escutcheons must be installed and maintained in compliance with the applicable standards of the NATIONAL FIRE PROTECTION ASSOCIATION (NFPA). The owner is responsible for maintaining their fire protection system and devices in proper operating condition
- See more on Amazon...
Brand: TunaMax | Manufacturer: TunaMax
See On Amazon Similar To TunaMax 2 Pack 1 2
#1
TunaMax Universal Work with All Shop Vacs with 2-1/2" & 1-7/8" & 1-1/4" Three Adapters Clear Extractor Attachment for Carpet Cleaning & Auto Detailing, Extraction Accessory for Wet Vacuum Cleaners
Asin: B0BHY57KY6 | Model: CUS15 | PartNumber: CUS15 | Ean: 0716032632002 | UPC: 716032632002
γEasy To Connect For Quick InstallationγThese Three Adapters Could Fit Both Hose Cuff And Extension Wand Of Shop Vacs Easily, Transform Shop Vac To An Extractor Immediately. The Three Adapters Are Without Any Inside Threads, No Need Cutting Or Breaking Your HoseβS End For Installing. Your Hose Cuff Could Still Connect To All Original Accessories Of Your Shop Vac.
γUpgrade CompatibilityγThe Standard 1-1/2β Odm Vacuum Tubing And 1-1/2β Idm Clear Head Are Compatible With Portable Extractors & Truck Mounts And Most Carpet Cleaning Systems. And The Adapters Are Compatible With Both Hose Cuff And Extension Wand. Our High-Quality Extraction Tool Is Safe For Upholstery, Carpets, Rugs, Floor Mats, And More For Convenient Deep Cleaning Needs.
γDiy A Powerful ExtractorγIf You Are Considering Buying A Professional Extractor, It Will Be A Good Substitute. You Can Therefore Save The Expensive Cost Of A Pro Extractor. Our Extractor Hand Wand Can Be Used As A Replacement For Many Extractor Heads; More Importantly, It Can Turn Your Wet/Dry Vacuum Cleaner Into A Powerful Extractor.
γUnbreakable Transparent Head DesignγThe Clear Extraction Head Is Very Strong And Would Be Not Breakable At Anytime And Anywhere And Any Power. The See-Through Nozzle Design Allows You To See The Dirt And Impurities Being Cleaned, And Directly See The Entire Cleaning Process And Effect. You Could Use This Small 3-1/2β Nozzle To Clean Stairs, Car Interiors, Upholstery, Carpets And All Other Hard-To-Reach Places.
Features
- Work with All Brands Wet Vacuum Cleaner 1-1/4" and 1-7/8" and 2-1/2" three adapters connect this extraction tool to all brands' shop vacuums from 1 gal to 20 gal like as Rigid, Crafts man, Vac master, Shop Vac, Work Shop, Rain bow and so on. 1-1/4" adapter is for wet/dry vac 1-5 gallon wet-dry vac and Rigid s auto detailing vacuum hose accessory kit. 1-7/8 adapter is for 5-9 gallon wet-dry vac, but for Rigid 3-9 Gallon. 2-1/2 adapter is for 10-20 gallon wet dry vacuum cleaners
- Unbreakable Transparent Head Design The clear extraction head is very strong and would be NOT breakable at anytime and anywhere and any power. The see-through nozzle design allows you to see the dirt and impurities being cleaned, and directly see the entire cleaning process and effect. You could use this small 3-1/2 nozzle to clean stairs, car interiors, upholstery, carpets and all other hard-to-reach places
- Easy to Connect for Quick Installation These three adapters could fit both hose cuff and extension wand of shop vacs easily, transform shop vac to an extractor immediately. The three adapters are without any inside threads, no need cutting or breaking your hose s end for installing. Your hose cuff could still connect to all original accessories of your shop vac
- DIY A Powerful Extractor If you are considering buying a professional extractor, it will be a good substitute. You can therefore save the expensive cost of a pro extractor. Our Extractor Hand Wand can be used as a replacement for many Extractor heads; More importantly, it can turn your wet/dry vacuum cleaner into a powerful extractor
- Upgrade Compatibility The standard 1-1/2 ODM vacuum tubing and 1-1/2 IDM clear Head are compatible with portable extractors & truck mounts and most carpet cleaning systems. And the adapters are compatible with both hose cuff and extension wand. Our high-quality extraction tool is safe for upholstery, carpets, rugs, floor mats, and more for convenient deep cleaning needs
- See more on Amazon...
Brand: TunaMax | Manufacturer: TunaMax
Weight: 0.10 Pounds
See On Amazon #2
TunaMax Universal Work with All Shop Vacs with 2-1/2" & 1-7/8" &1-1/4" Three Adapters Extractor Attachment for Upholstery & Carpet Cleaning & Auto Detailing
Asin: B0BP269X65 | Model: CULS25 | PartNumber: CULS25 | Ean: 0730851767332 | UPC: 730851767332
γEasy To Connect For Quick InstallationγThese Three Adapters Could Fit Both Hose Cuff And Extension Wand Of Shop Vacs Easily, Transform Shop Vac To An Extractor Immediately. The Three Adapters Are Without Any Inside Threads, No Need Cutting Or Breaking Your HoseβS End For Installing. Your Hose Cuff Could Still Connect To All Original Accessories Of Your Shop Vac.
γUpgrade CompatibilityγThe 1-1/2β Idm Clear Head Is Compatible With Portable Extractors & Truck Mounts And Most Carpet Cleaning Systems. And The Adapters Are Compatible With Both Hose Cuff And Extension Wand. Our High-Quality Extraction Tool Is Safe For Upholstery, Carpets, Rugs, Floor Mats, And More For Convenient Deep Cleaning Needs.
γDiy A Powerful ExtractorγIf You Are Considering Buying A Professional Extractor, It Will Be A Good Substitute. You Can Therefore Save The Expensive Cost Of A Pro Extractor. Our Extractor Hand Wand Can Be Used As A Replacement For Many Extractor Heads; More Importantly, It Can Turn Your Wet/Dry Vacuum Cleaner Into A Powerful Extractor.
γUnbreakable Transparent Head DesignγThe Clear Extraction Accessory Is Very Strong And Would Be Not Breakable At Anytime And Anywhere And Any Power. The See-Through Nozzle Design Allows You To See The Dirt And Impurities Being Cleaned, And Directly See The Entire Cleaning Process And Effect. You Could Use The Small 3-1/2" Nozzle To Clean Stairs, Car Interiors And All Other Hard-To-Reach Places. The Large 7-1/2" Nozzle Cover More Area And Save Your Time.
Features
- Work with All Brands Wet Vacuum Cleaner 1-1/4" and 1-7/8" and 2-1/2" three adapters connect this extraction tool to all brands' shop vacuums from 1 gal to 20 gal like as Rigid, Crafts man, Vac master, Shop Vac, Work Shop, Rain bow and so on. 1-1/4" adapter is for wet/dry vac 1-5 gallon wet-dry vac and Rigid s auto detailing vacuum hose accessory kit. 1-7/8 adapter is for 5-9 gallon wet-dry vac, but for Rigid 3-9 Gallon. 2-1/2 adapter is for 10-20 gallon wet dry vacuum cleaners
- Unbreakable Transparent Head Design The clear extraction accessory is very strong and would be NOT breakable at anytime and anywhere and any power. The see-through nozzle design allows you to see the dirt and impurities being cleaned, and directly see the entire cleaning process and effect. You could use the small 3-1/2 nozzle to clean stairs, car interiors and all other hard-to-reach places. The large 7-1/2 nozzle cover more area and save your time
- Easy to Connect for Quick Installation These three adapters could fit both hose cuff and extension wand of shop vacs easily, transform shop vac to an extractor immediately. The three adapters are without any inside threads, no need cutting or breaking your hose s end for installing. Your hose cuff could still connect to all original accessories of your shop vac
- DIY A Powerful Extractor If you are considering buying a professional extractor, it will be a good substitute. You can therefore save the expensive cost of a pro extractor. Our Extractor Hand Wand can be used as a replacement for many Extractor heads; More importantly, it can turn your wet/dry vacuum cleaner into a powerful extractor
- Upgrade Compatibility The 1-1/2 IDM clear Head is compatible with portable extractors & truck mounts and most carpet cleaning systems. And the adapters are compatible with both hose cuff and extension wand. Our high-quality extraction tool is safe for upholstery, carpets, rugs, floor mats, and more for convenient deep cleaning needs
- See more on Amazon...
Brand: TunaMax | Manufacturer: TunaMax
See On Amazon #3
TunaMax Universal Fire Sprinker Head wrench for 1/2" Semi-recessed or Concealed or Exposed Sprinkler Head
Asin: B0C5MBNYDR | Model: SW01 | PartNumber: SW01 | Ean: 0726323280782 | UPC: 726323280782
Dual Purpose: This Fire Sprinkler Head Spanner Is Suitable For Both 1/2'' Recessed And Concealed Fire Sprinkler Heads. Whether You're Working With Visible Or Concealed Systems, Our Wrench Offers Convenient Adaptability.
Important Note: Kindly Note That This Tool Is Specifically Designed For Fragile Bulb Fire Heads. It May Not Be Suitable For Other Types Of Sprinkler Heads. Please Ensure Compatibility With Your Specific Sprinkler Head Type Before Use.
Reliable Performance: Our Wrench Is Expertly Crafted To Fit Certain Models Of 3/4" Tyco/Rasco Reliable/Viking's Concealed Fragile Bulb Fire Heads. Please Note That It Is Not Compatible With 3/4" Victaulic Sprinkler Heads. With Its Easy Assembly And Professional Design, It's An Indispensable Tool For Any Fire Sprinkler System Professional.
Simplified Maintenance: Say Goodbye To The Hassle Of Using Different Wrenches For Each Style Or Brand Of Fire Head In Your Building. Our Innovative Tool Eliminates The Need For Multiple Wrenches By Providing A Single Solution For Removing Various Brands Of Fire Sprinkler Heads During Maintenance Tasks..
Features
- Versatile Compatibility: Our universal fire sprinkler head wrench is designed to fit all major brands of 1/2" fire sprinkler heads, including pendent, upright, and horizontal fragile bulb fire heads. It's the perfect tool for maintenance personnel who encounter multiple brands of sprinkler heads in buildings
- Simplified Maintenance: Say goodbye to the hassle of using different wrenches for each style or brand of fire head in your building. Our innovative tool eliminates the need for multiple wrenches by providing a single solution for removing various brands of fire sprinkler heads during maintenance tasks.
- Dual Purpose: This fire sprinkler head spanner is suitable for both 1/2'' recessed and concealed fire sprinkler heads. Whether you're working with visible or concealed systems, our wrench offers convenient adaptability
- Reliable Performance: Our wrench is expertly crafted to fit certain models of 3/4 Tyco/Rasco Reliable/Viking's concealed fragile bulb fire heads. Please note that it is not compatible with 3/4 Victaulic sprinkler heads. With its easy assembly and professional design, it's an indispensable tool for any fire sprinkler system professional
- Important Note: Kindly note that this tool is specifically designed for fragile bulb fire heads. It may not be suitable for other types of sprinkler heads. Please ensure compatibility with your specific sprinkler head type before use
- See more on Amazon...
Brand: TunaMax | Manufacturer: TunaMax
Dimensions: 1.18 x 3.94 x 1.18 inches | Weight: 0.33 Pounds
See On Amazon #4
(10 Pack) TunaMax 1/2" Fire Sprinkler Head Cage Guard for Protecting Side Wall & Pendent & Upright Sprinkler Head Cover Red
Asin: B08LPDHJGQ | Model: GR210 | PartNumber: GR210 | Ean: 0705124113468 | UPC: 705124113468
π©Remium Built: Heavy Iron Wire Construction Fire Sprinkler Head Cover. This Wire Clip Type Sprinkler Head Protector Is Durable And Sturdy Built. Red Coating Is Easily Recognizable Both For Fire Safety Purposes And To Reduce Chances Of Being Accidentally Hit And Burst And Bump.
π©Attention: Fire Sprinkler Head Guards Provide Protection From Occasional Light Contact, Do Not Protect Sprinkler Heads From Direct Impact Or Abuse. And These Fire Sprinkler Covers Are Only For Exposed Fire Sprinkler Heads, Cannot Be Used With Sprinkler Heads That Are Recessed With Escutcheon Rings.
π©Wide Application: The Fire Sprinkler Head Protectors Are Suitable For Sprinkler Heads In Either The Upright, Pendent Or Horizontal Sidewall Position. Protect Sprinkler Heads From Being Accidentally Hit And Burst And Bump. These Guards Work Well To Prevent Squirrels And Rodents From Destroying The Adapters And Heads Attached To Our Irrigation System Risers..
π©Rofessional Protection: The Fire Sprinkler Head Cages Are Designed To Protect 1/2" Sprinkler Heads Devices Against Vandalism Or Accidental Damage. It Is Very Important That Your Sprinkler Heads Remain Untouched And Safe.
Features
- EASY TO INSTALL: One piece double hook sprinkler wire enclosure. Latch hooks exposed for easily installation. No need any tool for install the sprinkler head cage. Release the two hooks on both sides of the cage, put on the sprinkler head, then recover hooking. The installation can be completed without any tool
- ROFESSIONAL PROTECTION: The fire sprinkler head cages are designed to protect 1/2 sprinkler heads devices against vandalism or accidental damage. It is very important that your sprinkler heads remain untouched and safe
- REMIUM BUILT: Heavy iron wire construction fire sprinkler head cover. This wire clip type sprinkler head protector is durable and sturdy built. Red coating is easily recognizable both for fire safety purposes and to reduce chances of being accidentally hit and burst and bump
- WIDE APPLICATION: The fire sprinkler head protectors are suitable for sprinkler heads in either the upright, pendent or horizontal sidewall position. Protect sprinkler heads from being accidentally hit and burst and bump. These guards work well to prevent squirrels and rodents from destroying the adapters and heads attached to our irrigation system risers.
- ATTENTION: Fire sprinkler head guards provide protection from occasional light contact, do not protect sprinkler heads from direct impact or abuse. And these fire sprinkler covers are only for exposed fire sprinkler heads, cannot be used with sprinkler heads that are recessed with escutcheon rings
- See more on Amazon...
Brand: TunaMax | Manufacturer: TunaMax
See On Amazon #5
TunaMax Universal Work with All Shop Vacs Clear Extractor Attachment with 1-1/4" & 1-7/8" & 2-1/2" Adapters for Upholstery & Carpet Cleaning & Auto Detailing
Asin: B0CZ97WXQJ | Model: CULS15 | PartNumber: CULS15 | Ean: 0726323280812 | UPC: 726323280812
γEasy To Connect For Quick InstallationγThese Three Adapters Could Fit Both Hose Cuff And Extension Wand Of Shop Vacs Easily, Transform Shop Vac To An Extractor Immediately. The Three Adapters Are Without Any Inside Threads, No Need Cutting Or Breaking Your HoseβS End For Installing. Your Hose Cuff Could Still Connect To All Original Accessories Of Your Shop Vac.
γUpgrade CompatibilityγThe Standard 1-1/2β Odm Vacuum Tubing And 1-1/2β Idm Clear Head Are Compatible With Portable Extractors & Truck Mounts And Most Carpet Cleaning Systems. And The Adapters Are Compatible With Both Hose Cuff And Extension Wand. Our High-Quality Extraction Tool Is Safe For Upholstery, Carpets, Rugs, Floor Mats, And More For Convenient Deep Cleaning Needs.
γDiy A Powerful ExtractorγIf You Are Considering Buying A Professional Extractor, It Will Be A Good Substitute. You Can Therefore Save The Expensive Cost Of A Pro Extractor. Our Extractor Hand Wand Can Be Used As A Replacement For Many Extractor Heads; More Importantly, It Can Turn Your Wet/Dry Vacuum Cleaner Into A Powerful Extractor.
γWork With All Brandsβ Wet Vacuum Cleanerγ 1-1/4" And 1-7/8" And 2-1/2" Three Adapters Connect This Extraction Tool To All Brands' Shop Vacuums From 1 Gal To 20 Gal Like As Rigid, Crafts Man, Vac Master, Shop Vac, Work Shop, Rain Bow And So On. 1-1/4" Adapter Is For Wet/Dry Vac 1-5 Gallon Wet-Dry Vac And RigidβS Auto Detailing Vacuum Hose Accessory Kit. 1-7/8β Adapter Is For 5-9 Gallon Wet-Dry Vac, But For Rigid 3-9 Gallon. 2-1/2β Adapter Is For 10-20 Gallon Wet Dry Vacuum Cleaners.
Features
- Work with All Brands Wet Vacuum Cleaner 1-1/4" and 1-7/8" and 2-1/2" three adapters connect this extraction tool to all brands' shop vacuums from 1 gal to 20 gal like as Rigid, Crafts man, Vac master, Shop Vac, Work Shop, Rain bow and so on. 1-1/4" adapter is for wet/dry vac 1-5 gallon wet-dry vac and Rigid s auto detailing vacuum hose accessory kit. 1-7/8 adapter is for 5-9 gallon wet-dry vac, but for Rigid 3-9 Gallon. 2-1/2 adapter is for 10-20 gallon wet dry vacuum cleaners
- Work with All Brands Wet Vacuum Cleaner 1-1/4 and 1-7/8 and 2-1/2 three adapters connect this extraction tool to all brands' shop vacuums from 1 gal to 20 gal like as Rigid, Crafts man, Vac master, Shop Vac, Work Shop, Rain bow and so on. 1-1/4 adapter is for wet/dry vac 1-5 gallon wet-dry vac and Rigid s auto detailing vacuum hose accessory kit. 1-7/8 adapter is for 5-9 gallon wet-dry vac, but for Rigid 3-9 Gallon. 2-1/2 adapter is for 10-20 gallon wet dry vacuum cleaners
- Easy to Connect for Quick Installation These three adapters could fit both hose cuff and extension wand of shop vacs easily, transform shop vac to an extractor immediately. The three adapters are without any inside threads, no need cutting or breaking your hose s end for installing. Your hose cuff could still connect to all original accessories of your shop vac
- DIY A Powerful Extractor If you are considering buying a professional extractor, it will be a good substitute. You can therefore save the expensive cost of a pro extractor. Our Extractor Hand Wand can be used as a replacement for many Extractor heads; More importantly, it can turn your wet/dry vacuum cleaner into a powerful extractor
- Upgrade Compatibility The standard 1-1/2 ODM vacuum tubing and 1-1/2 IDM clear Head are compatible with portable extractors & truck mounts and most carpet cleaning systems. And the adapters are compatible with both hose cuff and extension wand. Our high-quality extraction tool is safe for upholstery, carpets, rugs, floor mats, and more for convenient deep cleaning needs
- See more on Amazon...
Brand: TunaMax | Manufacturer: TunaMax
Dimensions: 3.00 x 16.00 x 3.50 Inches | Weight: 1.00 Pounds
See On Amazon #6
TUNA (2 Pack) UL & CUL Listed Fire Sprinkler Head Pendent Spray 1/2 NPT 155 F (68 C) K=5.6 Pendent Spray K80 Standard Response for Automatic Fire Sprinkler System White
Asin: B07XYGQNJF | Model: NX005W2 | PartNumber: NX005W2 | Ean: 0705124113703 | UPC: 705124113703
Nominal 5.6 K-Factor Fire Sprinkler Heads, Dia5mm Glass Bulb Standard Response 155F 68C.
Automatic Fire Sprinklers Of The Frangible Bulb Type.
Max Working Pressure 175Psig /1.2Mpa(12 Bar);Factory Hydrostatic Test 100%@ 500Psig (3.4Mpa).
Underwriter Laboratories Listed, Ul(United States) And Ulc(Canada) Listed.
Features
- UL & CUL listed EX6430. 1/2 " NPT (National National Pipe Thread) American thread fire sprinkler heads
- Underwriter Laboratories Listed, UL(United States) and ULC(Canada) Listed
- Nominal 5.6 K-Factor fire sprinkler heads, Dia5mm Glass Bulb Standard Response 155F 68C
- Max working pressure 175psig /1.2Mpa(12 bar);Factory Hydrostatic Test 100%@ 500psig (3.4Mpa)
- Automatic fire sprinklers of the frangible bulb type
- See more on Amazon...
Brand: Tuna | Manufacturer: TUNA
Dimensions: 1.97 x 1.30 x 1.30 Inches
See On Amazon #7
TunaMax Universal Work with All Shop Vacs Extractor Attachment with 1-1/4" & 1-7/8" & 2-1/2" Three Adapters for Upholstery & Carpet Cleaning & Auto Detailing, Large 7-1/2" Width Clear Head
Asin: B0BP1ZWMJ5 | Model: CUL25 | PartNumber: CUL25 | Ean: 0730851767301 | UPC: 730851767301
γEasy To Connect For Quick InstallationγThese Three Adapters Could Fit Both Hose Cuff And Extension Wand Of Shop Vacs Easily, Transform Shop Vac To An Extractor Immediately. The Three Adapters Are Without Any Inside Threads, No Need Cutting Or Breaking Your HoseβS End For Installing. Your Hose Cuff Could Still Connect To All Original Accessories Of Your Shop Vac.
γUpgrade CompatibilityγThe 1-1/2β Idm Clear Head Is Compatible With Portable Extractors & Truck Mounts And Most Carpet Cleaning Systems. And The Adapters Are Compatible With Both Hose Cuff And Extension Wand. Our High-Quality Extraction Tool Is Safe For Upholstery, Carpets, Rugs, Floor Mats, And More For Convenient Deep Cleaning Needs.
γDiy A Powerful ExtractorγIf You Are Considering Buying A Professional Extractor, It Will Be A Good Substitute. You Can Therefore Save The Expensive Cost Of A Pro Extractor. Our Extractor Hand Wand Can Be Used As A Replacement For Many Extractor Heads; More Importantly, It Can Turn Your Wet/Dry Vacuum Cleaner Into A Powerful Extractor.
γUnbreakable Transparent Head DesignγThe Clear Extraction Head Is Very Strong And Would Be Not Breakable At Anytime And Anywhere And Any Power. The See-Through Nozzle Design Allows You To See The Dirt And Impurities Being Cleaned, And Directly See The Entire Cleaning Process And Effect. This Large 7-1/2β Nozzle Cover More Area And Save Your Time. Great For Extracting Solutions From Vehicles And Living Room Upholstery& Carpet.
Features
- Work with All Brands Wet Vacuum Cleaner 1-1/4" and 1-7/8" and 2-1/2" three adapters connect this extraction tool to all brands' shop vacuums from 1 gal to 20 gal like as Rigid, Crafts man, Vac master, Shop Vac, Work Shop, Rain bow and so on. 1-1/4" adapter is for wet/dry vac 1-5 gallon wet-dry vac and Rigid s auto detailing vacuum hose accessory kit. 1-7/8 adapter is for 5-9 gallon wet-dry vac, but for Rigid 3-9 Gallon. 2-1/2 adapter is for 10-20 gallon wet dry vacuum cleaners
- Unbreakable Transparent Head Design The clear extraction head is very strong and would be NOT breakable at anytime and anywhere and any power. The see-through nozzle design allows you to see the dirt and impurities being cleaned, and directly see the entire cleaning process and effect. This large 7-1/2 nozzle cover more area and save your time. Great for extracting solutions from vehicles and living room upholstery& carpet
- Easy to Connect for Quick Installation These three adapters could fit both hose cuff and extension wand of shop vacs easily, transform shop vac to an extractor immediately. The three adapters are without any inside threads, no need cutting or breaking your hose s end for installing. Your hose cuff could still connect to all original accessories of your shop vac
- DIY A Powerful Extractor If you are considering buying a professional extractor, it will be a good substitute. You can therefore save the expensive cost of a pro extractor. Our Extractor Hand Wand can be used as a replacement for many Extractor heads; More importantly, it can turn your wet/dry vacuum cleaner into a powerful extractor
- Upgrade Compatibility The 1-1/2 IDM clear Head is compatible with portable extractors & truck mounts and most carpet cleaning systems. And the adapters are compatible with both hose cuff and extension wand. Our high-quality extraction tool is safe for upholstery, carpets, rugs, floor mats, and more for convenient deep cleaning needs
- See more on Amazon...
Brand: TunaMax | Manufacturer: TunaMax
Weight: 0.10 pounds
See On Amazon #8
(2 Pack) FM Approved & UL/CUL Listed TUNA Fire Sprinkler Head Pendent Spray 1/2 NPT 155 F (68 C) K=5.6 K80 Standard Response for Automatic Fire Sprinkler System
Asin: B0CKYJ2DYG | Model: NX025 | PartNumber: NX025 | Ean: 0726323280799 | UPC: 726323280799
Nominal 5.6 K-Factor Fire Sprinkler Heads, Dia5mm Glass Bulb Standard Response 155F 68C.
Automatic Fire Sprinklers Of The Frangible Bulb Type.
Max Working Pressure 175Psig /1.2Mpa(12 Bar);Factory Hydrostatic Test 100%@ 500Psig (3.4Mpa).
Underwriter Laboratories Listed, Ul(United States) And Ulc(Canada) Listed.
Features
- FM Approved 3053441and UL / CUL listed EX6430. 1/2 " NPT (National National Pipe Thread) American thread fire sprinkler heads
- Underwriter Laboratories Listed, UL(United States) and ULC(Canada) Listed
- Nominal 5.6 K-Factor fire sprinkler heads, Dia5mm Glass Bulb Standard Response 155F 68C
- Max working pressure 175psig /1.2Mpa(12 bar);Factory Hydrostatic Test 100%@ 500psig (3.4Mpa)
- Automatic fire sprinklers of the frangible bulb type
- See more on Amazon...
Brand: Tuna | Manufacturer: TUNA
Dimensions: 1.97 x 1.30 x 1.30 inches
See On Amazon #9
(2 Pack) FM Approved & UL/CUL Listed TUNA Fire Sprinkler Head Pendent Spray 1/2 NPT 155 F (68 C) K=5.6 K80 Standard Response for Automatic Fire Sprinkler System
Asin: B0CTCHFVWH | Model: NX025 | PartNumber: NX025 | Ean: 0726323280805 | UPC: 726323280805
Nominal 5.6 K-Factor Fire Sprinkler Heads, Dia5mm Glass Bulb Standard Response 155F 68C.
Automatic Fire Sprinklers Of The Frangible Bulb Type.
Max Working Pressure 175Psig /1.2Mpa(12 Bar);Factory Hydrostatic Test 100%@ 500Psig (3.4Mpa).
Underwriter Laboratories Listed, Ul(United States) And Ulc(Canada) Listed.
Features
- FM Approved 3053441and UL / CUL listed EX6430. 1/2 " NPT (National National Pipe Thread) American thread fire sprinkler heads
- Underwriter Laboratories Listed, UL(United States) and ULC(Canada) Listed
- Nominal 5.6 K-Factor fire sprinkler heads, Dia5mm Glass Bulb Standard Response 155F 68C
- Max working pressure 175psig /1.2Mpa(12 bar);Factory Hydrostatic Test 100%@ 500psig (3.4Mpa)
- Automatic fire sprinklers of the frangible bulb type
- See more on Amazon...
Brand: Tuna | Manufacturer: TUNA
Dimensions: 1.97 x 1.30 x 1.30 Inches
See On Amazon #10
TUNA UL & CUL Listed 1/2"NPT Fire Sprinkler Head 155 F (68 C) Concealed Pendent Spray K80 Standard Response for Automatic Fire sprinkler System Concealed Head with White Cover Plate
Asin: B076NXWWXZ | Model: NX007 | PartNumber: NX007 | Ean: 0717850029869 | UPC: 717850029869
Maximum Working Pressure:175Psi(12Bar); Min. Operating Pressure: 7Psi (0.48Bar); Factory Hydrostatic Test: 100%@ 500Psi (34.5Bar).
Frame: Bronze; Button: Brass/Copper; Sealing Assembly: Beryllium Nickel W/Teflon; Bulb: Glass Compression; Screw: Bronze; Deflector: Copper.
Temperature Rating: 155Β°F (68Β°C);Discharge Coefficient: K=5.6(U.S) /80(Metric);Nominal Orifice Size:1/2"(15Mm).
Features
- UL & CUL listed EX6430. 1/2 " NPT (National National Pipe Thread) American thread fire sprinkler heads
- Temperature Rating: 155 F (68 C);Discharge Coefficient: K=5.6(U.S) /80(Metric);Nominal Orifice Size:1/2(15mm)
- Maximum Working Pressure:175psi(12bar); Min. Operating Pressure: 7psi (0.48bar); Factory Hydrostatic Test: 100%@ 500psi (34.5bar)
- Frame: Bronze; Button: Brass/Copper; Sealing Assembly: Beryllium Nickel w/Teflon; Bulb: Glass Compression; Screw: Bronze; Deflector: Copper
- See more on Amazon...
Brand: Tuna | Manufacturer: TUNA
Dimensions: 2.44 x 3.29 x 3.29 Inches | Weight: 0.15 Pounds
See On Amazon #11
(2 Pack) FM Approved & UL/CUL Listed TUNA Fire Sprinkler Head Horizontal Sidewall Spray 1/2 NPT 155 F (68 C) K=5.6 Side Wall Spray K80 Standard Response for Automatic Fire Sprinkler System Chrome
Asin: B08NYDVBQN | Model: NX021 | PartNumber: NX021 | Ean: 0705124113369 | UPC: 705124113369
Nominal 5.6 K-Factor Fire Sprinkler Heads, Dia5mm Glass Bulb Standard Response 155F 68C.
Automatic Fire Sprinklers Of The Frangible Bulb Type.
Max Working Pressure 175Psig /1.2Mpa(12 Bar);Factory Hydrostatic Test 100%@ 500Psig (3.4Mpa).
Underwriter Laboratories Listed, Ul(United States) And Ulc(Canada) Listed.
Features
- FM Approved 3053441and UL / CUL listed EX6430. 1/2 " NPT (National National Pipe Thread) American thread fire sprinkler heads
- Underwriter Laboratories Listed, UL(United States) and ULC(Canada) Listed
- Nominal 5.6 K-Factor fire sprinkler heads, Dia5mm Glass Bulb Standard Response 155F 68C
- Max working pressure 175psig /1.2Mpa(12 bar);Factory Hydrostatic Test 100%@ 500psig (3.4Mpa)
- Automatic fire sprinklers of the frangible bulb type
- See more on Amazon...
Brand: Tuna | Manufacturer: TUNA
Dimensions: 1.97 x 1.30 x 1.30 inches
See On Amazon #12
(6 Pack) TunaMax 1/2" Fire Sprinkler Head Cage Guard for Protecting Side Wall & Semi - Recessed Sprinkler Head Cover
Asin: B08BY5XC9D | Model: GC46 | PartNumber: GC46 | Ean: 0705124113536 | UPC: 705124113536
π‘ Remium Built: One Piece Double Hook Sprinkler Wire Enclosure. This Wire Clip Type Sprinkler Head Protector Is Durable. Chrome Plated Cage Is Anti-Corrosion, Ensuring Long Life Use. If You Need More Stable Protection, Please Choose The Guard With Mounting Screws.
π‘ Attention: These Fire Sprinkler Covers Are Only For 1/2β Sprinkler Heads, Not For 3/4β Sprinkler Heads. If You Need More Stable Protection, Please Choose The Guard With Mounting Screws. And These Fire Sprinkler Protectors Are Only For Recessed Sprinkler Heads With Escutcheon Rings, Not For Exposed Fire Sprinkler Heads.
π‘ Wide Application: The Fire Sprinkler Head Protectors Are For Sprinkler Heads In Either Pendent Or Horizontal Sidewall Position. The Fire Sprinkler Cage Is For Use In Fire Suppression Systems. Every Parent With Children Needs These Sprinkler Head Protectors. It Is Also Designed For Basement, Schools, Hospitals, Hotels, Restaurants, Shops, Commercial Buildings, Universities, Hud Projects, Parks And Other Public Locations Where Both Functionality And Aesthetics Count.
π‘ Easy To Install: Latch Hooks For Easily Installation. No Need Any Tool For Install The Sprinkler Head Cage. Release The Two Hooks On Both Sides Of The Cage, Put On The Sprinkler Head, Then Recover Hooking. Installation Was A Breeze. Free Tool Sprinkler Head Guards.
Features
- ROFESSIONAL PROTECTION: These fire sprinkler head covers are designed for recessed residential sprinkler heads with escutcheon rings. The fire sprinkler cage is suitable for 1/2" fire head, and both ceiling mount and drywall-mounted sprinkler head. The fire sprinkler covers protect sprinkler heads from being accidentally hit and burst and bump. It is very important that your sprinkler heads remain untouched and safe
- EASY TO INSTALL: Latch hooks for easily installation. No need any tool for install the sprinkler head cage. Release the two hooks on both sides of the cage, put on the sprinkler head, then recover hooking. Installation was a breeze. Free tool sprinkler head guards
- REMIUM BUILT: One piece double hook sprinkler wire enclosure. This wire clip type sprinkler head protector is durable. Chrome plated cage is anti-corrosion, ensuring long life use. If you need more stable protection, please choose the guard with mounting screws
- WIDE APPLICATION: The fire sprinkler head protectors are for sprinkler heads in either pendent or horizontal sidewall position. The fire sprinkler cage is for use in fire suppression systems. Every parent with children needs these sprinkler head protectors. It is also designed for basement, schools, hospitals, hotels, restaurants, shops, commercial buildings, universities, HUD projects, parks and other public locations where both functionality and aesthetics count
- ATTENTION: These fire sprinkler covers are only for 1/2 sprinkler heads, not for 3/4 sprinkler heads. If you need more stable protection, please choose the guard with mounting screws. And these fire sprinkler protectors are only for recessed sprinkler heads with escutcheon rings, not for exposed fire sprinkler heads
- See more on Amazon...
Brand: TunaMax | Manufacturer: TunaMax
See On Amazon #13
(4 Pack) TunaMax White Fire Sprinkler Head Cage Guard for Both 1/2" & 3/4" Sprinkler Head for Protecting Flush Mount & Side Wall & Semi - Recessed Sprinkler Head Cover
Asin: B07YCK7Y5B | Model: TGW54 | PartNumber: TGW54 | Ean: 0705124113659 | UPC: 705124113659
ποΈExcellent Built: Heavy Iron Wire Construction Protective Cover, Mounting Screws Are Included. This Wire Clip Type Sprinkler Head Protector Is Durable And Sturdy Built. Fire Sprinkler Cover Is Welded At All Points For Strength, Strong Protection. White Coating Is Easily Recognizable Both For Fire Safety Purposes And To Reduce Chances Of Being Accidentally Hit And Burst And Bump.
ποΈ Attention: Fire Sprinkler Head Guards Provide Protection From Occasional Light Contact, Do Not Protect Sprinkler Heads From Direct Impact Or Abuse.
ποΈ Wide Application: These Beautiful Fire Sprinkler Head Protectors Are Suitable For Both 1/2" And 3/4" Fire Heads, And Flush Mount And Ceiling Mount And Drywall-Mounted Sprinkler Heads. These Fire Sprinkler Head Cages Are For Use Within The Fire Suppression System Line In Houses, Office Buildings, Schools, Restaurants, Hotels, Shops, Commercial Buildings Etc..
ποΈ Easy To Install: The Fire Sprinkler Head Cage Is Provided With Three Wire-Formed Eyelets For A Solid Installation. The Three Eyelets Are In A Equilateral Triangle. So When You Mark The Hole Location, No Need Of Noting Orientation. The Holes Would Line Up After You Drill. Very Easy To Install, Save Your Time.
Features
- ROFESSIONAL PROTECTION: These 3 deep fire sprinkler head covers are designed for recessed residential sprinkler heads with escutcheon rings. Protect fire sprinkler heads found in both walls and ceilings. The fire sprinkler head cages protect sprinkler heads from being accidentally hit and burst and bump. It is very important your fire sprinkler head remains untouched and safe
- EASY TO INSTALL: The fire sprinkler head cage is provided with three wire-formed eyelets for a solid installation. The three eyelets are in a equilateral triangle. So when you mark the hole location, NO NEED of noting orientation. The holes would line up after you drill. Very easy to install, save your time
- EXCELLENT BUILT: Heavy iron wire construction protective cover, mounting screws are included. This wire clip type sprinkler head protector is durable and sturdy built. Fire sprinkler cover is welded at all points for strength, strong protection. White coating is easily recognizable both for fire safety purposes and to reduce chances of being accidentally hit and burst and bump
- WIDE APPLICATION: These beautiful fire sprinkler head protectors are suitable for both 1/2 and 3/4 fire heads, and flush mount and ceiling mount and drywall-mounted sprinkler heads. These fire sprinkler head cages are for use within the fire suppression system line in houses, office buildings, schools, restaurants, hotels, shops, commercial buildings etc.
- ATTENTION: Fire sprinkler head guards provide protection from occasional light contact, do not protect sprinkler heads from direct impact or abuse
- See more on Amazon...
Brand: TunaMax | Manufacturer: TunaMax
Dimensions: 3.00 x 3.89 x 3.60 inches
See On Amazon ο»Ώ
Looking For Something Else?
Search