DC12-36V 20A 1000W ZVS Driver Model Induction Heating Board Module Heater With Copper Tube 90x180x65mm
Asin: B08MTQ942M
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Accurate Sized Holethe Positioning Hole And The Positioning Hole Of The Heat Radiating Fan Of The Board And The 9*9Cm Are Exactly Matched With The Positioning Hole Of The Board, And The 12V Power Supply Is Directly Inserted On The Board..
Two Output Modes: The Output End Of The Three Pillars Of Parallel And 300V/25A Terminals, Two Output Modes, Easy To Use Under Different Requirements..
Stable: Power Line Design Can Increase The Current Heat Radiation And Makes The Board Smaller And More Stable..
Good Heat Dissipation : This Zvs Adopted An Anti Static 42*35 Large Heat Sink Ensures A Good Heat Dissipation Effect..
Features
- LARGE PCB: Heating plate with large PCB design, component layout is sparse to heat dissipation.
- GOOD HEAT DISSIPATION : This ZVS adopted an anti static 42*35 large heat sink ensures a good heat dissipation effect.
- ACCURATE SIZED HOLEThe positioning hole and the positioning hole of the heat radiating fan of the board and the 9*9cm are exactly matched with the positioning hole of the board, and the 12V power supply is directly inserted on the board.
- STABLE: Power line design can increase the current heat radiation and makes the board smaller and more stable.
- TWO OUTPUT MODES: The output end of the three pillars of parallel and 300V/25A terminals, two output modes, easy to use under different requirements.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.51 Pounds
See On Amazon Similar To DC1236V 20A 1000W ZVS Driver
#1
5Pcs DC-DC Boost Converter Module 8-32V 12V to 45V-390V ZVS Capacitor Charging Board 220V 110V for Test Power Supply of Voltage or Glow Tube
Asin: B09ZTZ8S2Y | Model: 13479-1 | PartNumber: 13479-1 | Ean: 0701715532359 | UPC: 701715532359
Booster Module Input Current: 5A;Quiescent Current: 15Ma;Output Voltage: ±45-390V;Output Current: Maximum 0.2A;Output Power: 40W;Working Temperature: -40 To +85 Degrees.
Support Short Circuit Protection.Support Over Current/Voltage Protection.Support Reverse Input Protection..
Voltage Boost Converter Suitable For Capacitance Charging, Or Power Supply Of Electromagnetic Gun, Electronic Equipment. Can Be Test Power Supply Of Voltage Or Glow Tube..
Output Voltage Won't Change Over Input Voltage, According To System Can Set The Output Voltage Value..
Features
- This boost converter has voltage stabilizing function.Non-isolation boost module, very stable.
- Output voltage won't change over input voltage, according to system can set the output voltage value.
- Booster module input current: 5A;Quiescent Current: 15mA;Output Voltage: 45-390V;Output Current: Maximum 0.2A;Output Power: 40W;Working Temperature: -40 to +85 degrees
- Voltage boost converter suitable for capacitance charging, or power supply of electromagnetic gun, electronic equipment. Can be test power supply of voltage or glow tube.
- Support short circuit protection.Support over current/voltage protection.Support reverse input protection.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #2
5Pcs DC-DC Boost Converter Module 8-32V 12V to 45V-390V ZVS Capacitor Charging Board 220V 110V for Test Power Supply of Voltage or Glow Tube
Asin: B09ZV47KNL | Model: 13480-1 | PartNumber: 13480-1 | Ean: 0701715532366 | UPC: 701715532366
Booster Module Input Current: 5A;Quiescent Current: 15Ma;Output Voltage: ±45-390V;Output Current: Maximum 0.2A;Output Power: 40W;Working Temperature: -40 To +85 Degrees.
Support Short Circuit Protection.Support Over Current/Voltage Protection.Support Reverse Input Protection..
Voltage Boost Converter Suitable For Capacitance Charging, Or Power Supply Of Electromagnetic Gun, Electronic Equipment. Can Be Test Power Supply Of Voltage Or Glow Tube..
Output Voltage Won't Change Over Input Voltage, According To System Can Set The Output Voltage Value..
Features
- This boost converter has voltage stabilizing function.Non-isolation boost module, very stable.
- Output voltage won't change over input voltage, according to system can set the output voltage value.
- Booster module input current: 5A;Quiescent Current: 15mA;Output Voltage: 45-390V;Output Current: Maximum 0.2A;Output Power: 40W;Working Temperature: -40 to +85 degrees
- Voltage boost converter suitable for capacitance charging, or power supply of electromagnetic gun, electronic equipment. Can be test power supply of voltage or glow tube.
- Support short circuit protection.Support over current/voltage protection.Support reverse input protection.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #3
High Voltage DC DC 8-32V Boost Converter 12V to 45V-390V ZVS Boost Module Capacitor Charging
Asin: B07CMPWMC8 | Ean: 0741870033292 | UPC: 741870033292
Short Circuit Protection: This Boost Converter Adopted Short Circuit Protection Design, Will Not Be Easily Burned..
Reverse Input Protection: This Boost Converter Support Reverse Input Protection..
Easy Operation: Use 4Pcs 3Mm Screw To Install It.No-Welding Terminals..
Widely Application: Suitable For Capacitance Charging, Or Power Supply Of Electromagnetic Gun, Electronic Equipment. Can Be Test Power Supply Of Voltage Or Glow Tube..
Features
- STABLE: This boost converter has voltage stabilizing function.Non-isolation boost module, very stable.
- WIDELY APPLICATION: Suitable for capacitance charging, or power supply of electromagnetic gun, electronic equipment. Can be test power supply of voltage or glow tube.
- SHORT CIRCUIT PROTECTION: This boost converter adopted short circuit protection design, will not be easily burned.
- EASY OPERATION: use 4pcs 3mm screw to install it.No-welding terminals.
- REVERSE INPUT PROTECTION: This boost converter support reverse input protection.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 8.66 x 2.36 x 1.97 Inches | Weight: 0.15 Pounds
See On Amazon #4
DC 12-30V ZVS Flyback Driver Board 30-50kHz High Voltage Coil Generator Unassembled Set
Asin: B0756FCWMQ | Ean: 0736691512996 | UPC: 736691512996
1% Accuracy 3W Metal Film Resistor, Less Error, Higher Precision, Small Temperature Drift And Good Heat Dissipation, Professional And Reliable Performance.
Two Mkp 0.33 Uf 1200V In Parallel As High Frequency Resonant Capacitors Ensure Large Capacity, Convenient To Users.
Thick Anti-Static Heat Sink, Better Heat Dissipation Effect, Improves The Stability And Prolong The Service Life.
Two Original Irfp260n Mosfets Ensure Large Current, Small Internal Resistance And High Power.
Features
- Adopts high quality 1.6mm double circuit board and tin for power wire, at the same time, optimizes the wire size of MOS tube driving circuit, higher current-carrying capacity and better heat dissipation
- Two original IRFP260N mosfets ensure large current, small internal resistance and high power
- 1% accuracy 3W metal film resistor, less error, higher precision, small temperature drift and good heat dissipation, professional and reliable performance
- Thick anti-static heat sink, better heat dissipation effect, improves the stability and prolong the service life
- Two MKP 0.33 UF 1200V in parallel as high frequency resonant capacitors ensure large capacity, convenient to users
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.60 pounds
See On Amazon #5
ZVS Module, Wireless Transmission High Power Flyback Driver High Voltage Heating Power Supply Board for DIY Player
Asin: B0BNGK2Q6V | Model: LISNDy0cn1dfhbr | PartNumber: LISNDy0cn1dfhbr | Ean: 7008929310388
[Power Supply] It Can Be Powered By Switching Power Supply, Battery, Lithium Battery Pack, Or Use High Power Transformer To Rectify And Filter By Itself, And The Filter Capacitor Is Not Less Than 10000Uf..
[Input And Output Voltage] The High Voltage Module Supports 12‑36V Dc Input (24V Is Recommended) And Outputs High Voltage Dc Voltage With An Input Voltage Of About 1000 Times..
[Use Current Requirements] Heating Power Supply Module Uses 12‑24V Dc Input And Requires A Power Supply Current Of Not Less Than 4A At 12V And Not Less Than 8A At 24V..
[Application] Zvs Module With High Power, Low Heat Generation, Simple And Reliable, Widely Used To Drive For Spark Coils (For Sgtc) And For Ladder, For Marx Generators, Etc..
Features
- [Professional] ZVS high voltage power module, using flyback drive circuit, used to drive the ignition coil, also referred to as ZVS circuit by the majority of enthusiasts.
- [Application] ZVS module with high power, low heat generation, simple and reliable, widely used to drive for spark coils (for SGTC) and for ladder, for Marx generators, etc.
- [Power Supply] It can be powered by switching power supply, battery, lithium battery pack, or use high power transformer to rectify and filter by itself, and the filter capacitor is not less than 10000uF.
- [Use Current Requirements] Heating power supply module uses 12 24V DC input and requires a power supply current of not less than 4A at 12V and not less than 8A at 24V.
- [Input And Output Voltage] The high voltage module supports 12 36V DC input (24V is recommended) and outputs high voltage DC voltage with an input voltage of about 1000 times.
- See more on Amazon...
Brand: LISND | Manufacturer: LISND
See On Amazon #6
High Voltage DC-DC Boost Converter, 8V-32V to 45V-390V ZVS Step-up Booster Adjustable Module Capacitor Charging Power Supply Module
Asin: B0CFYNXZ9D | Model: 8V-32V to 45V-390V ZVS | PartNumber: 8V-32V to 45V-390V ZVS
Reliable Step Up Power: Elevate Your Power Supply Capabilities With Our Step Up Power Supply Module, Designed To Provide Consistent And Reliable Voltage Increases For Your Devices And Systems..
Precise Voltage Control: With The Step Up Voltage Adjustable Module, You Gain Fine-Tuned Control Over Voltage Levels, Ensuring Optimal Performance And Compatibility With A Wide Range Of Applications..
Adjustable Voltage Conversion: Our Dc-Dc Converter Step Up Module Features Adjustable Voltage Settings, Allowing You To Customize The Output To Suit Your Specific Project Requirements..
High Voltage Flexibility: Experience Versatile Power Solutions With Our High Voltage Boost Converter. It Allows You To Efficiently Step Up Voltage Levels To Meet The Demands Of Your Projects..
Features
- Effortless Voltage Boosting: Our DC-DC Step Up Converter efficiently transforms lower input voltages into a higher output, providing a seamless power boost for various applications.
- High Voltage Flexibility: Experience versatile power solutions with our High Voltage Boost Converter. It allows you to efficiently step up voltage levels to meet the demands of your projects.
- Reliable Step Up Power: Elevate your power supply capabilities with our Step Up Power Supply module, designed to provide consistent and reliable voltage increases for your devices and systems.
- Adjustable Voltage Conversion: Our DC-DC Converter Step Up Module features adjustable voltage settings, allowing you to customize the output to suit your specific project requirements.
- Precise Voltage Control: With the Step Up Voltage Adjustable Module, you gain fine-tuned control over voltage levels, ensuring optimal performance and compatibility with a wide range of applications.
- See more on Amazon...
Brand: CHEOTIME | Manufacturer: CHEOTIME
Dimensions: 8.66 x 2.36 x 1.97 Inches | Weight: 0.15 pounds
See On Amazon #7
Treedix ZVS Zero Voltage Switching Tesla Coil Flyback Driver Compatible with SGTC, Jacobs Ladder, Marx Generator, Induction Heating
Asin: B08728638T | Ean: 0765756504607 | UPC: 765756504607
Secured Coil To The Core And Leads To Each Other Firmly By Zip Ties. Leads From The Primary Were Sufficiently Tinned..
When The Input Voltage Is 12V / 5A, The Distance Of High Voltage Discharge Arc Is About 1-2 Cm. The Greater The Input Voltage And Current, The Longer The Discharge Arc Distance. When The Maximum Input Is 30V / 10A, The Longest Can Reach More Than 5 Cm. If The Arc Is Too Short, Check Whether The Input Power Is Sufficient..
Widely Used To Drive Spark Gap Tesla Coil (Sgtc) And Jacobs Ladder, Marx Generator, Induction Heating And Other Devices..
Driver Circuit Is Robust And Cleanly Built. Size：7*3.5*8.5Cm.
Features
- High power, low heat, simple and reliable.
- Driver circuit is robust and cleanly built. Size 7*3.5*8.5cm
- Secured coil to the core and leads to each other firmly by zip ties. Leads from the primary were sufficiently tinned.
- Widely used to drive spark gap Tesla coil (SGTC) and Jacobs ladder, Marx generator, induction heating and other devices.
- When the input voltage is 12v / 5A, the distance of high voltage discharge arc is about 1-2 cm. The greater the input voltage and current, the longer the discharge arc distance. When the maximum input is 30v / 10A, the longest can reach more than 5 cm. If the arc is too short, check whether the input power is sufficient.
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
Dimensions: 3.34 x 3.14 x 2.75 inches
See On Amazon #8
ZVS Module, Heating Power Supply Module Flyback Driver, High Voltage Wireless Transmission Power Supply Module with Coil for DIY Player
Asin: B0BFG2H7KK | Model: Cuifatigmt3wkdsxy7609 | PartNumber: Cuifatigmt3wkdsxy7609
[Professional] Zvs High Voltage Power Module, Using Flyback Drive Circuit, Used To Drive The Ignition Coil, Also Referred To As Zvs Circuit By The Majority Of Enthusiasts..
[Use Current Requirements] Heating Power Supply Module Uses 12‑24V Dc Input And Requires A Power Supply Current Of Not Less Than 4A At 12V And Not Less Than 8A At 24V..
[Application] Zvs Module With High Power, Low Heat Generation, Simple And Reliable, Widely Used To Drive For Spark Gap Coils (For Sgtc) And For Jacob Ladder, For Marx Generators, Etc..
[Input Power] High Voltage Coil Module 12V Input Can Up To 50‑100W Power, 24V Input Can Up To 200W Or More, So It Is Better To Request The Power Supply Current Above 10A..
Features
- [Input And Output Voltage] The high voltage module supports 12 36V DC input (24V is recommended) and outputs high voltage DC voltage with an input voltage of about 1000 times.
- [Input Power] High voltage coil module 12V input can up to 50 100W power, 24V input can up to 200W or more, so it is better to request the power supply current above 10A.
- [Professional] ZVS high voltage power module, using flyback drive circuit, used to drive the ignition coil, also referred to as ZVS circuit by the majority of enthusiasts.
- [Application] ZVS module with high power, low heat generation, simple and reliable, widely used to drive for spark gap coils (for SGTC) and for Jacob ladder, for Marx generators, etc.
- [Use Current Requirements] Heating power supply module uses 12 24V DC input and requires a power supply current of not less than 4A at 12V and not less than 8A at 24V.
- See more on Amazon...
Brand: Cuifati | Manufacturer: Cuifati
See On Amazon #9
DC-DC high Voltage Boost Module ZVS Capacitor Charging electromagnetic Gun 45-390v 780v Adjustable 5A
Asin: B09G85QQG6 | Ean: 3681156519300
Features
- DC-DC high voltage boost module ZVS capacitor charging electromagnetic gun 45-390v 780v adjustable 5A
- See more on Amazon...
Brand: IndustrialMaker | Manufacturer: IndustrialMaker
See On Amazon #10
ZVS Board, ZVS Module Flyback Driver High Voltage Wireless Transmission Power Supply Module with Coil for DIY Player
Asin: B0BDRS5K4M | Model: Vikyevzbyon1x0f1112 | PartNumber: Vikyevzbyon1x0f1112
[Professional] Zvs High Voltage Power Module, Using Flyback Drive Circuit, Used To Drive The Ignition Coil, Also Referred To As Zvs Circuit By The Majority Of Enthusiasts..
[Use Current Requirements] Heating Power Supply Module Uses 12‑24V Dc Input And Requires A Power Supply Current Of Not Less Than 4A At 12V And Not Less Than 8A At 24V..
[Application] Zvs Module With High Power, Low Heat Generation, Simple And Reliable, Widely Used To Drive For Spark Gap Coils (For Sgtc) And For Jacob Ladder, For Marx Generators, Etc..
[Input Power] High Voltage Coil Module 12V Input Can Up To 50‑100W Power, 24V Input Can Up To 200W Or More, So It Is Better To Request The Power Supply Current Above 10A..
Features
- [Input And Output Voltage] The high voltage module supports 12 36V DC input (24V is recommended) and outputs high voltage DC voltage with an input voltage of about 1000 times.
- [Input Power] High voltage coil module 12V input can up to 50 100W power, 24V input can up to 200W or more, so it is better to request the power supply current above 10A.
- [Professional] ZVS high voltage power module, using flyback drive circuit, used to drive the ignition coil, also referred to as ZVS circuit by the majority of enthusiasts.
- [Application] ZVS module with high power, low heat generation, simple and reliable, widely used to drive for spark gap coils (for SGTC) and for Jacob ladder, for Marx generators, etc.
- [Use Current Requirements] Heating power supply module uses 12 24V DC input and requires a power supply current of not less than 4A at 12V and not less than 8A at 24V.
- See more on Amazon...
Brand: Vikye | Manufacturer: Vikye
See On Amazon
Looking For Something Else?
Search